ASME B46.1 : 2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
Hardcopy , PDF
06-26-2020
English
08-20-2010
Foreword
Committee Roster
Correspondence With the B46 Committee
Executive Summary
Section 1 - Terms Related to Surface Texture
Section 2 - Classification of Instruments for Surface
Texture Measurement
Section 3 - Terminology and Measurement Procedures for
Profiling, Contact, Skidless Instruments
Section 4 - Measurement Procedures for Contact, Skidded
Instruments
Section 5 - Measurement Techniques for Area Profiling
Section 6 - Measurement Techniques for Area Averaging
Section 7 - Nanometer Surface Texture and Step Height
Measurements by Stylus Profiling Instruments
Section 8 - Nanometer Surface Roughness as Measured With
Phase Measuring Interferometric Microscopy
Section 9 - Filtering of Surface Profiles
Section 10 - Terminology and Procedures for Evaluation of Surface
Textures Using Fractal Geometry
Section 11 - Specifications and Procedures for Precision Reference
Specimens
Section 12 - Specifications and Procedures for Roughness Comparison
Specimens
Nonmandatory Appendices
A - General Notes on Use and Interpretation of Data Produced
by Stylus Instruments
B - Control and Production of Surface Texture
C - A Review of Additional Surface Measurement Methods
D - Additional Parameters for Surface Characterization
E - Characteristics of Certain Area Profiling Methods
F - Descriptions of Area Averaging Methods
G - Observations on the Filtering of Surface Profiles
H - Reference Subroutines
I - A Comparison of ASME and ISO Surface Texture
Parameters
J - Functional Standards
This Standard is concerned with the geometric irregularities of surfaces.
DevelopmentNote |
Supersedes MIL STD 10 (08/2005)
|
DocumentType |
Standard
|
ISBN |
9780791832622
|
Pages |
124
|
PublisherName |
American Society of Mechanical Engineers
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
FED-STD-H28-2 Revision B:1991 | Screw-Thread Standards for Federal Services Section 2 Unified Inch Screw Threads- UN and UNR Thread Forms |
AN849 Revision 13:2015 | NIPPLE, HOSE |
MIL-DTL-9395-40 Revision C:2006 | SWITCHES, PRESSURE, (GAGE), TYPE 2, LOW LEVEL TO 5 AMPERE |
MS123124 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 1/2 INCH, ALUMINUM |
MIL A 55339 : A | ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES & WITHIN SERIES) GENERAL SPECIFICATION FOR |
MIL-DTL-23351 Revision B:2003 | Waveguides, Single Ridge and Double Ridge, (No S/S Document) |
MIL F 3922 : B | FLANGE, WAVEGUIDE, GENERAL PURPOSE GENERAL SPECIFICATION FOR |
MIL-DTL-32371-10 Base Document:2012 | Fittings, Hydraulic Tube, Sleeve, Double Angle |
MIL-I-60870 Base Document:1968 | INITIATOR, CARTRIDGE ACTUATED, DELAY, 15, XM17, XM19, XM21, XM23, XM25, & XM110 METAL PARTS ASSEMBLY |
MIL-S-8879 Revision C:1991 | SCREW THREADS, CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER, GENERAL SPECIFICATION FOR |
GGG-S-121 Revision F:1992 | SCREWDRIVER AND SCREW STARTER, HAND |
MS27266 Revision B:2009 | Insert, Electrical Connector - Ramp Power, 416/240 Volts, Male |
MS27070 Revision E:2013 | SLEEVE, HOSE COUPLING |
MIL-DTL-7885-16 Base Document:1996 | RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, NICKEL-COPPER ALLOY SLEEVE (ALUM COAT), MECHANICALLY LOCKED CRES SPINDLE, OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 4) |
AWS D14.4/D14.4M : 2012 | SPECIFICATION FOR THE DESIGN OF WELDED JOINTS IN MACHINERY AND EQUIPMENT |
MIL-DTL-85069 Revision D:2012 | Sleeves and Grommets, Fastener, |
MS24357 Revision B:2016 | FLANGE, DROGUE CONE - TYPE MA-2 RECEPTION COUPLING, FLIGHT PRESSURE REFUELING, OUTLINE DIMENSIONS FOR |
API SPEC 19OH : 2018 | OPENHOLE ISOLATION EQUIPMENT |
NASM 23460 : 2004 | PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING |
DOD-STD-35-24 Revision A:1978 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, BEARINGS |
A-A-59200 Base Document:1998 | GRINDING MACHINES, SURFACE, ROTARY TABLE, VERTICAL SPINDLE |
MIL-N-45938 Revision A:1995 | NUT, PLAIN, CLINCH AND NUT, SEL-LOCKING, CLINCH GENERAL SPECIFICATION FOR |
MIL-B-8907 Revision A:1983 | BOLT, ALLOY STEEL, SHEAR AND TENSILE (156 KSI FSU AND 260 KSI FTU, 450 DEGREE F) EXTERNAL WRENCHING, FLANGED HEAD |
MIL-DTL-7885-12 Base Document:1996 | RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE |
PIP VEEVJ001 : 2015 | GASKET GUIDELINES |
MS24355 Revision C:2016 | COUPLING, RECEPTION - TYPE MA-2, FLIGHT-PRESSURE-REFUELING, ASSEMBLY OF |
MIL-HDBK-115 Revision C:2016 | U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES) |
AWS D1.1/D1.1M PORTUGUESE : 2010 | STRUCTURAL WELDING CODE - STEEL |
SAE J 911 : 2017 | SURFACE TEXTURE, ROUGHNESS (RA), PEAK COUNT(PC), AND MEAN PROFILE SPACING, (RSM) MEASUREMENT OF METALLIC COATED AND UNCOATED STEEL SHEET/STRIP TO BE FORMED AND/OR TO BE PAINTED |
SAE AS 4842 : 2016 | FITTINGS AND BOSSES, PIPE THREADED, FLUID CONNECTION |
MIL-B-87114 Revision A:1978 | BOLTS, RECESS DRIVE, GENERAL SPECIFICATION FOR |
MIL C 24640 : A | CABLE, LIGHT WEIGHT, ELECTRIC, LOW SMOKE, FOR SHIPBOARD USE GENERAL SPECIFICATION FOR |
MIL-T-8606 Revision C:1973 | TUBING, STEEL, CORROSION RESISTANT (18-8 STABILIZED AND EXTRA LOW CARBON) |
DOD P 63245 : A (2) | PROJECTILE, HE, 155MM, XM795 METAL PARTS ASSEMBLY |
SAE AMS 3242 : 2011 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 75-85 |
SAE ARP 1233 : 2012 | GLAND DESIGN, ELASTOMERIC O-RING SEALS, DYNAMIC RADIAL, 1500 PSI MAX |
SAE ARP 618 : 2013 | BOSS FITTINGS, METAL SEAL, FLUID SYSTEMS: GENERAL REQUIREMENTS FOR |
SAE AS 81819 : 2010 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, HIGH SPEED OSCILLATION -65 TO +160 DEGREES F GENERAL SPECIFICATION FOR |
MIL-P-23460 Revision E:1991 | PIN, QUICK-RELEASE, SELF-RETAINING POSITIVE-LOCKING |
MIL-P-60812 Base Document:1968 | PROJECTILE, 4.2INCH, WP, SMOKE, M328A1 METAL PARTS ASSEMBLY |
NASM 21059 : 2002 | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, LOW HEIGHT STEEL, 125 KSI FTU, 450 DEGREES F |
MS27069 Revision H:2017 | SOCKET, HOSE COUPLING |
DOD-P-63478 Base Document:1981 | PIN, STRAIGHT, HEADLESS (DOWEL), GENERAL SPECIFICATION FOR, METRIC |
MIL-A-27471 Revision C:1993 | ADAPTER, PRESSURE-REDUCER, IN-LINE CRU-43A/A |
SAE AMS 7907D : 2015(R2018) | BERYLLIUM BARS, RODS, TUBING, AND SHAPES, INSTRUMENT GRADE |
MIL-D-14826 Base Document:1970 | DELAY ELEMENT, CARTRIDGE. M24 ASSEMBLY |
MIL-P-60646 Revision B:1984 | PROJECTILE, 105 MM, HEAT-T, M456A1 METAL PARTS |
MIL F 16377 : G | FIXTURE, LIGHTING, INCANDESCENT, GENERAL LIGHTING 100 WATTS, 120 VOLTS, DRIPPROOF 15 DEGREES, SYMBOLS 89 & 90.2 |
MS 124691 124730 : E | INSERT, CRES HELICAL COIL FINE THREAD, 1-1/2 DIA NOMINAL LENGTH |
MS24591 Revision D:2007 | Socket, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 1 through 2 Inches Tubing Sizes |
SAE AS 85720 : 2018 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE BEAM SEAL, 5000/8000 PSI, GENERAL SPECIFICATION FOR |
MIL E 917 : E | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS (NAVAL SHIPBOARD USE) |
GGG-P-446 Revision A:1964 | PLATE, LAPPING |
MIL-DTL-24211-2 Revision E:2013 | Gaskets, Waveguide Flange (Flat Face) |
MIL-B-81793 Revision D:1993 | BEARING, BALL, PRECISION, FOR INSTRUMENTS AND ROTATING COMPONENTS |
AWS B4.0:2016 | STANDARD METHODS FOR MECHANICAL TESTING OF WELDS |
MIL-STD-1312-9 Revision A:1984 | FASTENER TEST METHODS - METHOD 9, STRESS CORROSION |
MIL-DTL-24646 Revision C:2015 | FUSE BOXES, GENERAL SPECIFICATION FOR |
MS27391 Revision F:2013 | Nipple, Flareless, Tube to Hose - Swivel Nut |
MS27071 Revision D:2013 | UNION, NIPPLE |
SAE AMS7910D:2015(R2018) | BERYLLIUM NEAR-NET PREFORMS, STANDARD GRADE, COLD ISOSTATIC PRESSED, SINTERED |
SAE AMS 2303 : 2016 | STEEL CLEANLINESS, AIRCRAFT QUALITY, MARTENSITIC CORROSION-RESISTANT STEELS, MAGNETIC PARTICLE INSPECTION PROCEDURE |
MIL-DTL-24509 Revision B:2017 | Valves, Flanged, Balland Plugfor Sewageand Seawater Service |
MIL-R-43010 Revision B:1988 | REMOULDING SET, SOIL & COMPACTION |
MIL-R-43003 Revision F:1994 | RELEASE, CARGO PARACHUTE, 5,000 POUND CAPACITY |
MIL-C-60861 Base Document:1971 | CARTRIDGE, DELAY, M128 ASSEMBLY |
MIL-STD-1312-18 Base Document:1985 | FASTENER TEST METHOD 18, ELEVATED TEMPERATURE TENSILE STRENGTH |
A-A-59330 Base Document:1998 | Grinding Machine, Surface, Reciprocating-Table, Horizontal-Spindle, Power-Feed |
MS123121 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 5/16 INCH, ALUMINUM |
MIL-DTL-24211-1 Revision D:2013 | Gaskets, Waveguide Flange (Cover) |
IPC 6012 RUSSIAN : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS |
SAE AMS 4944 : 2015 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3.0AL - 2.5V COLD WORKED, STRESS RELIEVED |
SAE AMS 4945 : 2014 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED |
SAE AMS 7819 : 2013 | MOLYBDENUM ALLOY BARS, 0.48TI - 0.90ZR - 0.02C, ARC CAST, STRESS RELIEVED |
SAE MA 1937 : 2018 | NUT, HEX, FREE RUNNING, PROCUREMENT SPECIFICATION FOR, METRIC |
SAE ARP 1234 : 2012 | GLAND DESIGN, ELASTOMERIC O-RING SEALS, STATIC AXIAL, WITHOUT BACK-UP RINGS |
MS16051 Revision G:2014 | COUPLING, GROUND COOLING, COMBAT TYPE AIRCRAFT |
MIL E 17807 : C | ELEVATOR, WEAPON AND CARGO, ELECTROMECHANICAL (SHIPBOARD) |
MIL-F-14805 Revision B:1977 | FUSE, MT, M571 ASSEMBLY |
MIL-P-60620 Revision D:1985 | PROJECTILE ASSEMBLY FOR CARTRIDGE, SMOKE, WP, 81MM, M375A1 |
MS20761 Revision C:2016 | ELBOW, FLARED TUBE, FLANGED, SWIVEL, 45 DEGREES |
MIL-B-85667-10 Base Document:1991 | BOLT, SLEEVE, 100 DEGREES TENSION FLUSH HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, CRES A-286 PIN, 160 KSI FTU, 450 DEGREES F |
MIL PRF 0032287 : 0 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT |
MIL-P-70447 Base Document:1984 | PROJECTILE, PRACTICE, 155MM, M804 LOADING ASSEMBLING AND PACKING |
SAE AMS 7482 : 1995 | STUDS - STEEL, CORROSION AND HEAT RESISTANT,ROLL THREADED AFTER HEAT TREATMENT, 1800F (980 C) SOL HEAT TREATED |
SAE AS 7460 : 2017 | BOLTS AND SCREWS, TITANIUM ALLOY, 6.0AL-4.0V, PROCUREMENT SPECIFICATION FOR |
MS28754 Revision E:2012 | FITTING END, SELF-SEALING FUEL HOSE, SWIVEL, DETACHABLE, FLANGED, 45 DEGREES |
MIL C 83723/80 : B | CONNECTOR, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SOLDER FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT), (SERIES 1II, CLASSES H AND Y) |
MS21077 Revision H:1994 | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, NON-METALLIC INSERT, STEEL 125 KSI FTU, 250 DEG F |
MIL-V-2961 Revision D:1990 | VALVES, GLOBE, PRESSURE REDUCING, GAS SERVICE |
MS21953 Revision C:2015 | BODY, CLUSTER FITTING, ONE-WAY, FLARE |
MS20757 Revision C:2013 | Connector, Fixed Flange, to Hose |
MIL C 83723/81 : D | CONNECTOR, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SINGLE HOLE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT)(SERIES 111, CLASSES H AND Y) |
MIL-C-81703 Base Document:1971 | CONNECTOR, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING |
MIL-E-46440 Revision D:1979 | ELEMENT, IGNITION, ELECTRIC, M18, PARTS |
MS27394 Revision C:2014 | ELBOW, FLARELESS, TUBE TO HOSE - 90 DEGREE SWIVEL NUT |
MIL-DTL-3922-56 Revision D:2010 | FLANGES, WAVEGUIDE (COVER) (ROUND, 8 HOLE) |
MS70101 Revision C:1986 | |
DOD-M-24672 Base Document:1986 | MOLDS, AND MOLD HEATING PLATEN FOR MOLDING ELECTRICAL CONNECTORS AND CABLES (METRIC) |
MS70108 Revision C:1986 | LINK PARACHUTE CONNECTOR |
GGG-C-2773 Base Document:1992 | CYLINDER RECONDITIONING & CORRECTION EQUIPMENT - PORTABLE |
MIL W 12133 : D | WASHER, SPRING TENSION GENERAL SPECIFICATION FOR |
MIL-D-60851 Base Document:1962 | DELAY ELEMENT, CARTRIDGE, 45, ASSEMBLY |
MS123138 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 1 7/8 INCH, ALUMINUM |
MS123134 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 1 3/8 INCH, ALUMINUM |
MIL-DTL-7891 Revision G:2008 | FILLER VALVE, AIRCRAFT OXYGEN |
MS9193 Revision A:2010 | NIPPLE, TUBE - SAE-AMS5639, BOSS |
MIL T 11891 : E | TRACK SHOE ASSEMBLY, TRACK SHOE SETS, TRACK SHOE PADS, & TRACK SHOE BUSHINGS, VEHICULAR, ELASTOMERIZED |
MIL-DTL-7885-14 Base Document:1996 | RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE, OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 1) |
MIL V 0024695 : B | VALVE, HOSE ASSEMBLY, AND ADAPTER, VENT AND TEST HYDRAULIC SERVICE, GENERAL SPECIFICATION FOR (METRIC) |
MIL-DTL-3922-54 Revision E:2013 | Flanges, Waveguide (Cover) (Square, 4 Hole) |
MIL-DTL-3922-55 Revision D:2013 | Flanges, Waveguide (Cover) (Round, 6 Hole) |
MIL A 002550 : C | AMMUNITION, GENERAL SPECIFICATION FOR |
MIL-V-2042 Revision E:1990 | VALVE, REDUCING, WATER SERVICE, FOR NAVAL SHIPBOARD USE |
MIL C 46270 : C | CARTRIDGE, INITIATOR, DELAY, M71 |
GG-G-86 Revision C:1987 | GAGE, SHEET AND PLATE, TWIST DRILL, DRILL ROD, AND WIRE |
MIL-PRF-7908 Revision E:2009 | VALVES, CHECK, AIRCRAFT LOW PRESSURE OXYGEN SYSTEMS |
MIL C 83723/88 : C | CONNECTOR ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (FLANGE MOUNT, THREADED COUPLING, SOLDER PIN CONTACT),(SERIES 1II, CLASSES H AND Y) |
MIL-C-48565 Base Document:1975 | CASE, CARTRIDGE, 90MM, M108B1 |
MIL-W-3970-22 Revision B:2014 | WAVEGUIDE ASSEMBLIES, RIGID, CAST, 90-DEGREE E-PLANE BEND, FULL CORRAL |
MIL-DTL-3922 Revision E:2016 | FLANGES, WAVEGUIDE, GENERAL PURPOSE, GENERAL SPECIFICATION FOR |
EN ISO 25178-2:2012 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012) |
AWS D1.1/D1.1M : 2015 | STRUCTURAL WELDING CODE-STEEL |
MS9095 Revision B:2010 | NIPPLE, TUBE - ALUMINUM, BOSS |
MIL-P-46199 Base Document:1989 | PLATE: ALUMINUM OXIDE CERAMIC (FOR USE IN ARMOR COMPOSITES) |
MIL-C-22520-29 Base Document:1977 | CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINATION, PNEUMATIC TOOL FOR WIRE BARREL SIZES 12 THROUGH 20 |
AN842 Revision 13:2013 | ELBOW - PIPE TO HOSE, 90 DEGREES |
MIL-P-50398 Base Document:1979 | PROJECTILE, 165MM, TP M624, METAL PARTS |
MIL P 70551 : 0 | PROJECTILE, 81MM, SMOKE, RP, M819 METAL PARTS |
MS27611 Revision H:2018 | VALVE, HYDRAULIC BLEEDER, AIRCRAFT WHEEL BRAKE |
MS27635 Revision C:2009 | NIPPLE, FLARELESS, TUBE TO HOSE, SWIVEL NUT |
DOD-S-63543 Base Document:1982 | STUD & ROD, THREADED, METRIC, GENERAL SPECIFICATION FOR |
SAE MAP 4296 : 2015 | DRAWING INTERPRETATIONS, STANDARD MACHINING PRACTICE, TUBE FITTINGS AND CONNECTORS, FLUID SYSTEMS, METRIC |
SAE MA 4035 : 2012 | RINGS, RETAINING - SPIRAL WOUND, UNIFORM SECTION CORROSION RESISTANT, PROCUREMENT SPECIFICATION FOR, METRIC |
SAE AS 7452 : 2014 | BOLTS AND SCREWS, STEEL, LOW ALLOY HEAT TREATED, ROLL THREADED |
SAE AS 7459 : 2015 | BOLTS AND SCREWS, STEEL UNS K14675 TENSILE STRENGTH 195 KSI FATIGUE AND STRESS-RUPTURE RATED PROCUREMENT SPECIFICATION |
MIL-DTL-7885-11 Base Document:1996 | RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE (TYPE I, STYLE A, CLASS 1) |
MIL-HDBK-1897 Base Document:1996 | TOLERANCES FOR INVESTMENT CASTINGS |
SAE AS 4892 : 2012 | INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED, PROCUREMENT SPECIFICATION FOR |
SAE AS 27198 : 2014 | SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROSILICONE RUBBER, MIL-DTL-25988 |
SAE AS 8914 : 2016 | BEARING, ROLLER, SELF-ALIGNING, AIRFRAME, ANTIFRICTION |
SAE AMS 4943 : 2015 | TITANIUM ALLOY, HYDRAULIC, SEAMLESS TUBING, 3.0AL - 2.5V, ANNEALED |
SAE MA 3378 : 2018 | BOLTS AND SCREWS, UNS N07001, TENSILE STRENGTH 1210 MPA, THREAD AND FILLET RADIUS ROLLED BEFORE AGING, PROCUREMENT SPECIFICATION, METRIC |
SAE AS 1339 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC |
MS27395 Revision D:2014 | ELBOW, FLARELESS, TUBE TO HOSE - 45 DEGREES SWIVEL NUT |
SAE AS 4444 : 2013 | FITTINGS, 24 DEGREE CONE FLARELESS, FLUID CONNECTION, 5000 PSI |
SAE AMS 6466 : 2017 | STEEL, CORROSION-RESISTANT, WELDING WIRE, 5.2CR - 0.55MO |
SAE AMS 2304 : 2015 | STEEL CLEANLINESS, SPECIAL AIRCRAFT-QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE |
SAE AS 8952 : 2005 | BEARINGS, ROLLER, ROD END, ANTIFRICTION SELF-ALIGNING |
MIL-DTL-7885-28 Base Document:1996 | RIVETS, BLIND, STRUCTURAL, FLANGED DOME HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED 8740 ALLOY STEEL SPINDLE, OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 4) |
MIL-B-25870 Revision A:1972 | BEARINGS SINTERED METAL, PROCESSING OF |
SAE MAP 3439 : 2012 | O-RING GROOVE DESIGN FOR PACKING PREFORMED, ELASTOMERIC O-RING SEALS, STATIC, AXIAL COMPRESSION, METRIC |
SAE AMS 2634 : 2013 | ULTRASONIC INSPECTION, THIN WALL METAL TUBING |
MIL B 85667/7 : A | BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, NICKEL ALLOY 718 PIN, 125 KSI FSU, 220 KSI FTU, 450 DEG F. |
SAE AS 5270 : 2013 | BOLTS, SCREWS AND STUDS, NICKEL ALLOY, UNS N07718, WORK-STRENGTHENED, TENSILE STRENGTH 220 KSI, PROCUREMENT SPECIFICATION |
SAE AMS 2633 : 2017 | ULTRASONIC INSPECTION, CENTRIFUGALLY-CAST, CORROSION-RESISTANT STEEL TUBULAR CYLINDERS |
SAE AS 614 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 400 DEGREES F, HEAVY DUTY, HYDRAULIC AND PNEUMATIC |
SAE AMS 3025 : 2018 | POLYALKYLENE GLYCOL HEAT TREAT QUENCHANT |
MS27282 Revision B:2009 | Insert, Electrical Connector - Ramp Power, 416/240 Volts, Female |
MIL-DTL-24227 Revision A:2018 | Fittings and Flanges, Cast Bronze, Silver-Brazing, Suitable for Ultrasonic Inspection |
API 616 : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
MS20759 Revision C:2013 | Elbow, Hose, Flanged Swivel, 90 Degrees |
MIL-C-26637 Revision A:1987 | CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES LT |
MIL-P-63208 Revision B:1985 | PROJECTILE, 105 MM, HEAT T, M622 METAL PARTS |
MS24590 Revision C:2007 | Socket, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 3/16 through 3/4 Inch Tubing Sizes |
MIL-B-8906 Revision C:1988 | BOLT, ALLOY STEEL, SHEAR AND TENSILE, (132 KSI MIN FSU AND 220 KS MIN FTU), 45 DEGREE F, SPLINE DRIVE |
MIL-P-63514 Revision A:1986 | PROJECTILE, 105MM, TP-T, M489A1, METAL PARTS ASSEMBLY |
MIL-STD-1699 Revision B:1992 | NONDESTRUCTIVE EVALUATION OF BUTT WELDS IN CRANE AND RAILROAD RAILS |
MIL-S-21472 Revision C:1988 | SCREW, SHOULDER, HEXAGON SOCKET-HEAD AND SLOTTED-HEAD GENERAL SPECIFICATION FOR |
MIL-B-22227 Revision A:1976 | BEARING, BALL, ANNULAR, GENERATOR AND MOTOR-GENERATOR |
MS123123 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 7/16 INCH, ALUMINUM |
ASME B89.3.7 : 2013 | GRANITE SURFACE PLATES |
AN844 Revision 13:2013 | ELBOW - PIPE TO HOSE, 45 DEGREES |
JSSG-2006 Base Document:1998 | JOINT SERVICE SPECIFICATION GUIDE - AIRCRAFT STRUCTURES |
MIL-B-8976 Base Document:1969 | BEARINGS, PLAIN, SELF-ALIGNING, ALL METAL |
MS27077 Revision D:2014 | FLANGE, SWIVEL, RETAINING |
MIL-P-70997 Base Document:1991 | PROJECTILE, 81MM, HE, M821E1/M889E1 BODY ASSEMBLY |
MIL-P-14829 Base Document:1968 | PROJECTILE, 4.2 INCH TACTICAL CS, XM633 METAL PARTS ASSEMBLY |
DOD STD 1312/9 : LATEST | FASTENER TEST METHODS, METRIC, METHOD 9, STRESS CORROSION |
AN 840 : 0011 | ADAPTER, STRAIGHT, PIPE TO HOSE |
DOD-T-63549 Base Document:1982 | THUMBSCREW, WING HEAD, METRIC, GENERAL SPECIFICATION FOR (METRIC) |
AN917 Revision 9:2011 | TEE, PIPE |
MIL-M-8555 Revision C:1984 | MISSILE, GUIDED, DESIGN AND CONSTRUCTION, GENERAL SPECIFICATION |
MS22046 Revision C:1974 | RING - PARACHUTE HARNESS "D" |
AN846 Revision 9:2013 | ELBOW, HOSE, 45 DEGREES |
MIL-W-3970-23 Revision B:2014 | WAVEGUIDE ASSEMBLIES, RIGID, CAST, 90-DEGREE E-PLANE BEND, MITER AND RADIUS-BACK MITER, FULL CORRAL |
MIL-DTL-45932 Revision A:2015 | INSERT, SCREW THREAD, THIN WALL, LOCKED IN: GENERAL SPECIFICATION FOR |
MIL-P-48323 Revision C:1984 | PROJECTILE, 8 INCH, HE, RA, M650 ROCKET MOTOR BODY ASSEMBLY |
MIL-S-45909 Revision C:1989 | STUD, LOCKED IN - RING LOCKED SERRATED |
SAE MA 4510 : 2015 | FITTINGS, WELD, FLUID CONNECTION, 35,000 KPA, METRIC |
SAE AS 22227 : 2014(S2018) | BEARING, BALL, ANNULAR, GENERATOR AND MOTOR GENERATOR |
SAE AMS P 5315 : 2013 | ACRYLONITRILE-BUTADIENE (NBR) RUBBER FOR FUEL-RESISTANT SEALS 60 TO 70 |
SAE AS 7330 : 2012 | RINGS, RETAINING - SPIRAL WOUND, UNIFORM SECTION CORROSION RESISTANT STEEL PROCUREMENT SPECIFICATION FOR |
SAE J 1502 : 2013 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS - DIAGNOSTIC |
GGG-P-61 Revision A:1966 | PARALLELS; STEEL AND CAST-IRON, PRECISION-GROUND |
MIL-R-83459 Revision A:1978 | RIVET, TITANIUM, BIMETAL 95 KSI F SU GENERAL SPECIFICATION FOR |
MS21206 Revision A:1991 | WASHER COUNTERSUNK AND PLAIN FOR USE WITH BOLTS AND NUTS UP TO & INCLUDING 220 KSI FTU |
MIL V 24509 : A | VALVES, FLANGED, BALL & PLUG FOR SEWAGE & SEA WATER SERVICE |
MIL C 83723/89 : D | CONNECTORS, ELECTRICAL (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SINGLE HOLE MOUNT, THREADED COUPLING, SOLDER PIN CONTACT), (SERIES 3, CLASSES H, N, AND Y) |
MIL-P-63226 Base Document:1979 | PROJECTILE GUIDED, 155MM, XM712 WARHEAD FOR |
AN848 Revision 13:2015 | Elbow, Hose, 90 Degree |
MIL P 60584 : A | PROJECTILE, 155MM, SMOKE, WP, M110 METAL PARTS ASSEMBLY |
MIL-S-22141 Revision B:1976 | STEEL, INVESTMENT CASTINGS ALLOY AND CARBON |
AN924 Revision 14:2018 | NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING |
MS9769 Revision B:2008 | REDUCER, TUBE - STRAIGHT, TUBE TO BOSS |
MS21946 Revision F:2012 | Body, Cluster Fitting, One-Way, Internal Boss |
MS27638 Revision E:2009 | MANDREL SLEEVE SETTING |
MIL-B-23964 Revision D:1981 | BOLT, SELF-RETAINING, POSITIVE LOCKING |
MIL-C-14814 Revision B:1978 | CARTRIDGE, IMPULSE, M270 |
MIL-C-24706 Base Document:1988 | COUPLING, PIPE, HEAT-RECOVERABLE |
MIL-B-63354 Revision A:1987 | |
MIL-S-45933 Base Document:1971 | STUD, KEYRING LOCKED, 125 AND 160 KSI FTU, GENERAL SPECIFICATION FOR |
SAE MAM 5914 : 2003 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND FOIL 52.5NI - 19CR - 3.0MO - 5.0CB - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED PRECISION COLD ROLLED, SOLUTION HEAT TREATED |
AWWA C507 : 2015 | BALL VALVES, 6 IN. THROUGH 60 IN. (150 MM THROUGH 1,500 MM) |
A-A-51141 Revision A:1990 | PLATE, LAPPING |
SAE AMS 4368 : 2017 | ALUMINUM ALLOY, DISCONTINUOUSLY REINFORCED HOT ISOSTATICALLY PRESSED SHAPES 6061B/SIC/40P (3[MU]M) (T1P) |
A-A-59459 Base Document:1999 | GRINDING MACHINE, TOOL AND CUTTER, COMPUTER NUMERICAL CONTROL (CNC) |
SAE AMS 7855 : 2017 | COLUMBIUM (NIOBIUM) ALLOY BARS, RODS, AND WIRE, 10W - 2.5ZR, RECRYSTALLIZED |
SAE AS 4976 : 2012 | Insert, Screw Thread, Non-Locking, UNS S66286, Locked in, Key Locked, Procurement Specification for(STABILIZED Mar 2019) |
SAE AMS 7904E : 2015(R2018) | Beryllium Bars, Rods, Tubing, and Shapes High Ductility Grade |
SAE AS 7475 : 2015 | BOLTS, COBALT-CHROMIUM-NICKEL ALLOY, UNS R30159, TENSILE STRENGTH 260 KSI, PROCUREMENT SPECIFICATION |
MIL-F-81177 Revision E:1984 | FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED ALLOY STEEL, GENERAL SPECIFICATION FOR |
AWS D1.5M/D1.5 : 2015 | BRIDGE WELDING CODE |
MIL-B-85667-2 Revision A:1991 | BOLT, SLEEVE, 100 DEG. REDUCED FLUSH HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, CRES PH 13-8MO PIN, 125 KSI FSU |
MIL-P-60596 Revision B:1990 | PROJECTILE, HE, 8 INCH M106 METAL PARTS ASSEMBLY |
SAE AMS 7906D : 2015(R2018) | BERYLLIUM BARS, RODS, TUBING, AND SHAPES, STANDARD GRADE |
SAE AS 7252 : 2015 | NUTS, SELF-LOCKING, STEEL HIGH STRENGTH, ALL METAL 450 DEGREES F USE, UN AND UNJ THREAD FORM |
MS27086 Revision D:2013 | Elbow, Nipple End, Flared, Tube to Hose - 90 Degrees Swivel Nut |
MIL-DTL-7885-20 Base Document:1996 | RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH SHEAR HEAD, NICKEL-COPPER ALLOY SLEEVE (ALUM COAT), MECHANICALLY LOCKED CRES SPINDLE, (TYPE 1, STYLE A, CLASS 3) |
MIL-DTL-3928-7 Revision E:2011 | SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE (COAXIAL) (MANUALLY AND SOLENOID OPERATED) CLASSES 1 (TYPE N CONNECTORS) AND 7 (TYPE BNC CONNECTORS) |
NASM16562:2010 | PIN, SPRING, TUBULAR, SLOTTED |
MIL-PRF-31031 Revision C:2014 | CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES, GENERAL SPECIFICATION FOR |
MIL-DTL-3922-57 Revision D:2013 | Flanges, Waveguide (Cover) (Round, 8 Hole) (2 Holes Centered Horizontally, 2 Holes Centers Vertically) |
MIL-G-10944 Revision B:1965 | GAGE, DIMENSIONAL CONTROL |
MIL-I-60231 Revision B:1995 | IGNITION ELEMENT, ELECTRIC, M55 ASSEMBLY |
NASM1312-11:2017 | FASTENER TEST METHODS METHOD 11 TENSION FATIGUE |
MIL-N-85353 Base Document:1981 | NUTS (FASTENERS) INTERNALLY THREADED, PRELOAD LOCKING 450 DEG F 800 DEG F,1200 DEG F, GENERAL SPECIFICATION FOR |
ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
MIL-DTL-24705 Revision B:2010 | PENETRATORS, MULTIPLE CABLE, ELECTRIC CABLE, GENERAL SPECIFICATION FOR |
MIL-C-46227 Revision D:1973 | COMPONENTS FOR PROPELLANT ACTUATED DEVICES |
MIL C 15730 : M | COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER |
A-A-52531 Base Document:1995 | KINGPIN, FIFTH WHEEL, 2 INCH AND 3.5 INCH, UNIVERSAL |
MIL-P-63293 Revision B:1983 | PROJECTILE, 105 MM, HEAT T MP, M456A2 METAL PARTS ASSEMBLY |
MIL-PRF-39012 Revision F:2014 | CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
MIL F 24646 : SUPP 1 | FUSE BOXES, FEEDER DISTRIBUTION, TOTALLY ENCLOSED, 125/25O VOLTS, DIRECT CURRENT, THREE WIRE BUSES, TWO WIRE BRANCHES, O-3O AMPERE MIDGET FUSES, SYMBOLS 6O9, 61O AND 611 |
IPC A 600 SWEDISH : H | ACCEPTABILITY OF PRINTED BOARDS |
MIL-A-24741 Base Document:1990 | ASSEMBLIES, METAL ELECTRICAL BACKPLANE, ONE AND TWO LAYER, GENERAL SPECIFICATION FOR |
MIL-A-14813 Base Document:1968 | ACTUATOR, CREW EJECTION 1000-42 REMANUFACTURED METAL PARTS ASSEMBLY |
MIL-B-85598 Base Document:1988 | BEARINGS, ELASTOMERIC GENERAL SPECIFICATION FOR |
DOD N 70329 : 0 | NUT, PLAIN, ROUND, BALL AND ROLLER BEARINGS, METRIC, GENERAL SPECIFICATION FOR |
MIL-N-85615-4 Base Document:1989 | NUT ASSEMBLY, SELF-SEALING, LOW PROFILE, FLOATING, SELF-LOCKING, 125 KSI FTU, 225 DEGREES F |
IPC A 600 JAPANESE : H | ACCEPTABILITY OF PRINTED BOARDS |
IPC A 600 CHINESE : G | ACCEPTABILITY OF PRINTED BOARDS |
MIL-P-60815 Revision A:1968 | PROJECTILE, TP-T, 152MM XM411E1 METAL PARTS ASSEMBLY |
MIL-P-50357 Base Document:1969 | PROJECTILE, 60MM. H.E., M49A3 METAL PARTS ASSEMBLY (ALLOY STEEL) |
MS21949 Revision C:2014 | BOLT-CLUSTER FITTING, SINGLE PORT-FLARE |
MIL P 81716 : 0 | PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE II HYDRAULIC (MINUS 65 DEG F TO PLUS 275 DEG F) |
AN838 Revision 9:2011 | Elbow, Tube to Hose, 90 Degrees |
MIL C 39012 : C | GENERAL SPECIFICATION FOR RADIO FREQUENCY COAXIAL CONNECTORS |
MIL-C-48424 Base Document:1973 | CASE, CARTRIDGE, 76MM, M88B1 |
MIL-C-81769 Base Document:1972 | CHEMICAL MILLING OF METALS, SPECIFICATION FOR |
SAE MA 1784 : 2012 | SPACERS AND WASHERS, PROCUREMENT SPECIFICATION FOR, METRIC |
SAE AS 4604 : 2003 | HOSE ASSEMBLY, 3000 PSI, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 400 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
MIL-PRF-81975 Revision C:2008 | COUPLINGS, REGULATED, AERIAL PRESSURE REFUELING TYPE MA-2, TYPE MA-3 AND TYPE MA-4 |
MIL C 27536 : B | COUPLING, CLAMP, GROOVED, V-BAND |
MIL-PRF-25961 Revision H:2008 | VALVE, FILL-BUILDUP-VENT, LIQUID OXYGEN CONVERTER, CRU-50/A |
GGG-R-425 Revision B:1974 | RIVET SETS, PNEUMATIC TOOL |
MIL-C-14836 Revision A:1972 | CASE, PROJECTILE, BURSTER, M9A1 |
IPC 6012 POLISH : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS |
MIL-F-60612 Revision C:1977 | FUZE, MTSQ, M548 ASSEMBLY |
MIL-L-28796 Base Document:1973 | LINE ASSEMBLIES, RADIO FREQUENCY TRANSMISSION GENERAL SPECIFICATION FOR |
SAE AMS 3077 A : 1994(S2018) | COMPOUND, CORROSION PREVENTIVE, SOFT FILM, THIXOTROPIC, COLD APPLICATION |
MIL-DTL-14997 Revision C:2009 | Projectile, 105MM, Illuminating, M314A3 and Projectile, 105MM, Infrared Illuminating, M1064 Loading Accessories |
MIL F 70546 : 0 | FIN ASSEMBLIES, MORTAR CARTRIDGE, 81MM, M28, M29 |
AN914 Revision 11:2012 | ELBOW, PIPE, INTERNAL AND EXTERNAL THREAD, 90 DEGREES |
MIL-STD-2131 Revision A:1991 | LAUNCHER, EJECTION GUIDED MISSILE, AIRCRAFT, GENERAL DESIGN CRITERIA FOR |
SAE AS 7949 : 2004 | BEARINGS, BALL, AIRFRAME, ANTIFRICTION, GENERAL STANDARD |
SAE ARP 4266 : 2014 | HOLE CONTOUR, FLUID PASSAGE, TUBE FITTING |
SAE AS 7454 : 2016 | BOLTS AND SCREWS, STEEL, LOW ALLOY, HEAT RESISTANT 135000 PSI TENSILE STRENGTH, NORMALIZED AND TEMPERED, ROLL THREADED |
SAE ARP 1232 : 2012 | GLAND DESIGN, ELASTOMERIC O-RING SEALS, STATIC RADIAL |
SAE AS 7470 : 2012 | BOLTS AND SCREWS, STEEL, CORROSION AND MODERATE HEAT RESISTANT HEAT TREATED, ROLL THREADED |
MIL-P-8564 Revision D:1970 | PNEUMATIC SYSTEM COMPONENTS, AERONAUTICAL, GENERAL SPECIFICATION FOR [ASG] |
MIL-DTL-45952 Revision A:2014 | PIN, QUICK-RELEASE, DETENT GENERAL SPECIFICATION FOR |
MIL-D-52353 Revision A:1975 | DRIFTPIN, STEEL |
GGG-G-15 Revision C:1975 | GAGE BLOCKS AND ACCESSORIES (INCH AND METRIC) |
MIL-S-14249 Revision C:1981 | STRAIGHTEDGE, RADIAL LINE, SLOTTED TEMPLET. |
SAE AS 4875 : 2016 | FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION |
SAE AS 39029 : 2017 | CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR |
SAE AS 4891 : 1999 | STUD, LOCKED IN, KEY LOCKED, UNS S66286, CLASSIFICATION: 140 KSI PROCUREMENT SPECIFICATION FOR |
SAE AIR 6553 : 2014 | MEASUREMENT UNCERTAINTY AND CONSUMER RISK |
SAE AMS 7910 : 2015 | BERYLLIUM NEAR-NET PREFORMS, STANDARD GRADE, COLD ISOSTATIC PRESSED, SINTERED |
SAE MA 1339 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 21,000 KPA, 204 DEGREE C, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC, METRIC |
SAE AS 27196 : 2014 | SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROCARBON RUBBER, AMS7276 |
MIL-DTL-15743 Revision F:2017 | SWITCHES, ROTARY, ENCLOSED |
MIL-DTL-2118 Revision D:2017 | TRAP, STEAM, ANGLE, THERMOSTATIC |
SAE AS 7205 : 2012 | SPRING PINS, TUBULAR, CARBON STEEL, PROCUREMENT SPECIFICATION FOR |
MIL-PRF-23256 Revision C:1998 | VALVE ASSEMBLY, SEAL |
MIL-S-24686 Revision A:1992 | Sprinkler, Automatic, Quick Response |
MS27636 Revision B:2009 | ELBOW, FLARELESS, TUBE TO HOSE, 90 DEGREES, SWIVEL NUT |
MIL-DTL-24643 Revision C:2009 | Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
SAE AMS 2449 : 2010 | GRINDING OF HVOF SPRAYED TUNGSTEN CARBIDE COATINGS APPLIED TO HIGH STRENGTH STEELS |
SAE AS 5377 : 2000 | NUT, SELF-LOCKING, 0.7500 THRU 1.5000 THREAD SIZES, UNS S66286, 160,000 PSI, 800 DEGREE F, UNJ THREAD - PROCUREMENT SPECIFICATION |
MIL-T-60102 Revision A:1974 | THRUSTER, CARTRIDGE ACTUATED, M9 METAL PARTS ASSEMBLY |
MIL C 83413 : A | CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING, GENERAL SPECIFICATION FOR |
MIL-PRF-83861 Revision D:2013 | FILTER ELEMENTS, DISPOSABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 AND 15 MICRON ABSOLUTE |
MS24588 Revision C:2007 | Nipple, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 3/16 through 3/4 Inch Tubing Sizes |
SAE AMS 5564 : 2013 | STEEL, CORROSION RESISTANT, TUBING 19CR - 10NI (SAE 30304) HIGH-PRESSURE HYDRAULIC, WELDED PLUS ULTRASONICALLY TESTED OR SEAMLESS COLD DRAWN, ONE EIGHTH - HARD TEMPER |
SAE AS 838 : 2013 | AIRCRAFT HYDRAULIC STARTER/PUMPS |
SAE AS 7251 : 2014 | NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT HIGH STRENGTH, ALL METAL 1200 DEGREES F USE, UNJ THREAD FORM |
SAE AMS 7258 : 2001 | RINGS, SEALING, BUTADIENE-ACRYLONITRILE (NBR) RUBBER FUEL RESISTANT, LOW SHRINKAGE 65-75 |
SAE AMS 2422 : 2014 | PLATING, GOLD |
SAE MA 4070 : 2013 | PINS, PROCUREMENT SPECIFICATION FOR, METRIC |
SAE AS 8942 : 2014 | BEARINGS, PLAIN AND PTFE LINED, SELF - ALIGNING |
SAE AS 4873 : 2014 | GLAND DESIGN, ELASTOMERIC O-RING SEALS, STATIC RADIAL AND FACE 800 PSI MAXIMUM SERVICE |
SAE J 1453/1 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS |
SAE AMS 4993F : 2017 | TITANIUM ALLOY, BLENDED POWDER COMPACTS, SINTERED, 6AL - 4V |
SAE AS 4723 : 2012 | INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, KEY LOCKED, PLASTIC SELF LOCKING DEVICE, SOLID FILM LUBRICANT, PROCUREMENT SPECIFICATION FOR |
SAE AS 4060 : 2013 | TUBE FITTINGS SWAGED JOINT, ROLLER EXPANDER, MANUAL PROCESS, REQUIREMENTS FOR |
SAE AMS 2425 : 2012 | PLATING, GOLD FOR THERMAL CONTROL |
SAE AMS 5561 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED AND DRAWN OR SEAMLESS AND DRAWN TUBING, 9.0MN - 20CR - 6.5NI - 0.28N, HIGH-PRESSURE HYDRAULIC |
SAE MA 4368 : 2018 | NUT, PLAIN ROUND - SPANNER WRENCHING, SHAFT MOUNTED, UNS S66286, PROCUREMENT SPECIFICATION FOR, METRIC |
MIL-R-43838 Revision B:1993 | RELEASE, CARGO PARACHUTE, AIRDROP, M-2 |
A-A-59332 Revision A:2013 | GRINDING MACHINE, CYLINDRICAL, EXTERNAL, CENTER-TYPE, COMPUTER NUMERICAL CONTROL (CNC) |
MIL-T-60800 Base Document:1968 | THRUSTER, CARTRIDGE ACTUATED, M17, REMANUFACTURED METAL PARTS ASSEMBLY |
MIL-B-60806 Revision C:1974 | BOOSTER, M125A1 ASSEMBLY LESS BOOSTER PELLET AND LEAD CUP CHARGE |
MIL-D-60866 Base Document:1968 | DELAY ELEMENT CARTRIDGE, M27 ASSEMBLY |
MIL-B-46654 Revision C:1969 | BOOSTER, M125A1 ASSEMBLY LESS BOOSTER PELLET AND LEAD CUP CHARGE |
SAE MA 1943 : 2012 | NUTS, SELF-LOCKING, UNS N07001, 760 DEGREE C, 1100 MPA AND 1210 MPA, PROCUREMENT SPECIFICATION FOR, METRIC |
SAE MA 3376 : 2018 | Bolts & Screws, UNS G87400 Tensile Strength 860 MPa & 1000 MPa Procurement Specification, Metric |
SAE AS 5857 : 2010 | GLAND DESIGN, O-RING AND OTHER ELASTOMERIC SEALS, STATIC APPLICATIONS |
MSS SP 112 : 2016 | QUALITY STANDARD FOR EVALUATION OF CAST SURFACE FINISHES - VISUAL AND TACTILE METHOD |
MS17185 Revision A:2006 | CLAMP (SYNCHRO) |
MIL-T-60677 Base Document:1968 | THRUSTER, CARTRIDGE ACTUATED, M9 REMANUFACTURED METAL PARTS ASSEMBLY |
AGA XQ1201 : 2012(R2017) | AGA REPORT NO. 3, ORIFICE METERING OF NATURAL GAS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES |
SAE AMS 7909 : 2015 | ALUMINUM BERYLLIUM, NNS PREFORMS HOT ISOSTATIC PRESSED 38AL - 62BE |
SAE AS 7481:1996(S2015) | STUDS, STEEL, UNS S66286 AGED AFTER ROLL THREADED PROCUREMENT SPECIFICATION FOR |
SAE AMS 2689 : 2016 | FUSION WELDING TITANIUM AND TITANIUM ALLOYS |
SAE AS 7478 : 2017 | BOLTS AND SCREWS, STEEL, UNS S66286, CLASSIFICATION: 130 KSI/1200 DEGREES F, 1800 DEGREES F SOLUTION HEAT TREATED, AGED AFTER ROLL THREADED, PROCUREMENT SPECIFICATION FOR |
SAE AMS 2632 : 2008 | INSPECTION, ULTRASONIC, OF THIN MATERIALS 0.5 INCH (12.77 MM) AND UNDER IN CROSS-SECTIONAL THICKNESS |
MIL-DTL-45918 Revision A:2009 | CLEVISES AND CONNECTORS (ROD END) |
MIL-F-45911 Revision A:1973 | FITTINGS, AUTOMOTIVE TUBE, SPHERICAL SLEEVE (COMPRESSION) TYPE, BRASS |
MIL-S-7742 Revision D:1991 | SCREW THREADS, STANDARD, OPTIMUM SELECTED SERIES, GENERAL SPECIFICATION FOR |
GGG-C-313 Revision D:1995 | CHISELS, HAND: CAPE, DIAMOND POINT, COLD, ROUND NOSE, AND SIDE CUTTING |
MIL-R-60897 Base Document:1968 | REMOVER, AIRCRAFT CANOPY, M8A1 METAL PARTS ASSEMBLY (CONVERSION) |
MIL-W-8982 Revision D:1989 | WRENCHES, SPLINED, HIGH STRENGTH, THIN WALL, GENERAL SPECIFICATION FOR |
MS24466 Revision K:1998 | BEARING, ROLLER, NEEDLE DOUBLE ROW, HEAVY DUTY, TRACK ROLLER, TYPE 6, ANTIFRICTION, INCH |
IPC A 600 GERMAN : H | ACCEPTABILITY OF PRINTED BOARDS |
MIL-B-83050 Revision D:1985 | BOLT, SELF RETAINING, IMPEDANCE TYPE |
MS123127 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 3/4 INCH, ALUMINUM |
MIL-DTL-3922-52 Revision D:2010 | FLANGES, WAVEGUIDE (PRESSURIZABLE CONTACT) |
MIL C 83723 : E | CONNECTORS, ELECTRICAL (CIRCULAR, ENVIRONMENT RESISTING) RECEPTACLES AND PLUGS GENERAL SPECIFICATION FOR |
DOD P 16232 : F | PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE (FOR FERROUS METALS) |
MIL-S-14197 Revision B:1977 | STUD, PHOTOGRAMMETRIC SLOTTED TEMPLETS |
MIL-F-18280 Revision F:1995 | FITTING, FLARELESS TUBE, FLUID CONNECTION |
MIL-PRF-55339 Revision C:2005 | Adapters, Connectors, Coaxial, Radio Frequency, (Between Series and within Series), General Specification for |
MIL-DTL-32373 Base Document:2011 | Plug, Machine Thread, Magnetic: Drain |
SAE AS 4417A : 2014 | NUTS, SELF-LOCKING, ALLOY, CORROSION AND HEAT RESISTANT, HIGH STRENGTH, ALL METAL, SOLID FILM LUBRICATED, 1400 DEGREES F, PROCUREMENT SPECIFICATION |
MIL-T-60699 Base Document:1969 | THRUSTER, CARTRIDGE ACTUATED, M7, REMANUFACTURED METAL PARTS ASSEMBLY |
API 11D2 : 2010 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
AWS C7.2M : 2010 | RECOMMENDED PRACTICES FOR LASER BEAM WELDING, CUTTING, AND ALLIED PROCESSES |
MIL T 62410 : LATEST | TUBE ASSEMBLY METAL, SWAGED HYDRAULIC, (M1 TANK) |
MIL-T-24270 Revision B:1983 | THERMOWELLS FOR THERMOMETERS AND ELECTRICAL TEMPERATURE SENSORS GENERAL SPECIFICATION FOR |
MIL-DTL-3655 Revision D:2004 | Connector, Plug and Receptacle, Electrical (Coaxial, Series Twin), and Associated Fittings, General Specification for |
MIL-F-5509 Revision D:1978 | FITTING, FLARED TUBE, FLUID CONNECTION |
MIL-DTL-3922-68 Revision B:2016 | FLANGES, WAVEGUIDE COVER (BUTT MOUNT) (SQUARE, 4 HOLE) |
MIL V 24630 : 0 | VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID |
MIL C 22442/32 : A | CABLE ASSEMBLY, RADIO FREQUENCY (AIRCRAFT AUDIO), ASSOCIATED PARTS |
PIP VESLP001 : 2012 | LOW-PRESSURE, WELDED VESSEL SPECIFICATION |
MIL-DTL-12235 Revision A:2009 | PROJECTILE, PLATE-PROOFING (FOR IMPACT OR SHOCK TESTING) 37 MM M1000, 57 MM M1001, 75 MM M1002, 90 MM M1003, 105 MM M1004, 20 MM M1005, 57 MM M1001A, AND 75 MM M1002A |
IPC A 600 POLISH : H | ACCEPTABILITY OF PRINTED BOARDS |
IPC A 600 RUSSIAN : H | ACCEPTABILITY OF PRINTED BOARDS |
API MPM CH22.2 : 2017 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 22 - TESTING PROTOCOL - SECTION 2 - DIFFERENTIAL PRESSURE FLOW MEASUREMENT DEVICES |
MIL-DTL-3922-61 Revision E:2010 | FLANGES, WAVEGUIDE (CHOKE) (ROUND, 8 HOLE) |
MIL-DTL-24640 Revision C:2011 | CABLES, LIGHTWEIGHT, LOW SMOKE, ELECTRIC, FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
MIL-S-70334 Base Document:1987 | SHIM, SOLID GENERAL SPECIFICATION FOR |
DOD-N-70333 Base Document:1985 | NUT, PLAIN AND SELF-LOCKING, CLINCH, METRIC (SELF-CLINCHING, KNURLED COLLAR) FIXED AND FLOATING, GENERAL SPECIFICATION FOR |
MIL-DTL-32258 Base Document:2007 | NUT, SELF-LOCKING (RING TYPE NON-METALLIC INSERT), HEAVY HEX, CONTROLLED ROOT RADIUS, NICKEL-COPPER ALLOY |
AN918 Revision 9:2011 | CROSS, PIPE |
GGG-B-001222 Base Document:1967 | BIT, SCREWDRIVER (AND ADAPTER, SCREWDRIVER BIT) |
MIL-B-85667 Revision A:1991 | BOLT, SLEEVE, STRAIGHT SHANK, PROTRUDING AND FLUSH HEAD GENERAL SPECIFICATION FOR |
AN841 Revision 7:2013 | ADAPTER - HOSE TO FLARED TUBE |
DOD-W-63474 Revision B:1994 | WASHERS, SPRING TENSION, METRIC, GENERAL SPECIFICATION FOR |
MIL-PRF-57267 Base Document:2017 | COUPLING, AERIAL PRESSURE REFUELING TYPE MA-5 |
MIL-DTL-5070-1 Base Document:2007 | Nipple Assembly 90 Degrees, Adapter, Hose to Tube, Reusable, Brazeless, One-Piece Design, Hydraulic, Fuel and Oil Lines, 1/4 through 2 Inch Tube Sizes |
MIL C 24231 : D | CONNECTOR, PLUGS, RECEPTACLES, ADAPTORS, HULL INSERTS AND HULL INSERT PLUGS, PRESSURE-PROOF, GENERAL SPECIFICATION FOR |
MS172236THRUMS172270 Revision B:1974 | NUT, SPANNER, BEARING RETAINING, AERONAUTICAL (ASG) |
DOD-B-82737 Base Document:1987 | BALLS, BEARING, FERROUS AND NON-FERROUS, (FOR USE IN BEARINGS, VALVES AND BEARING APPLICATIONS) - GENERAL SPECIFICATION FOR |
MIL-B-46066 Revision B:1983 | BANDS, ROTATING, COPPER ALLOY, CENTRIFUGAL CAST (FOR CRITICAL APPLICATIONS) |
MIL-T-425 Revision J:1994 | TUBE, STEEL: PIPELINE SECTION; WITH GROOVED NIPPLE WELDED ON EACH END |
MIL-PRF-6164 Revision G:2012 | VALVE; AIRCRAFT, PNEUMATIC, HIGH-PRESSURE CHARGING |
MS27082 Revision E:2014 | ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 90 DEGREES |
MIL-N-85615-10 Base Document:1989 | NUT, SELF-SEALING, SELF-LOCKING, CRES, 160 KSI FTU, 250 DEGREES F & 450 DEGREES F |
MIL-A-14898 Base Document:1969 | ACTUATOR, ROTARY 1000-34 REMANUFACTURED METAL PARTS ASSEMBLY |
MS24358 Revision B:2016 | FITTING, HOSE END - TYPE MA-2, FLIGHT PRESSURE REFUELING, RECEPTION COUPLING, OUTLINE DIMENSIONS FOR |
AN916 Revision 11:2011 | ELBOW, PIPE, INTERNAL THREAD. 90 DEGREES |
MIL H 29181 : B | HASP, HIGH SECURITY,SHROUDED FOR HIGH AND MEDIUM SECURITY PADLOCK GENERAL SPECIFICATION FOR |
MIL-B-7874 Revision B:1982 | BOLT, MACHINE 1200 DEGREES F |
MIL-B-85643 Base Document:1987 | BITS, SCREWDRIVER, RIBBED GENERAL SPECIFICATION FOR |
MIL F 83798 : B | FITTING, RUBBER HOSE, LIGHTWEIGHT MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
MIL-C-28859 Revision B:1990 | CONNECTOR COMPONENT PART, ELECTRICAL BACK PLANE, PRINTED WIRING, GENERAL SPECIFICATION FOR |
MIL-W-80119 Revision B:1971 | WELDING SYSTEMS, ELECTRON BEAM, VACUUM TYPE, COMPUTER NUMERICALLY CONTROLLED (CNC) |
MIL-I-45934 Base Document:1971 | INSERT, SCREW THREAD, KEYRING LOCKED, SELF LOCKING AND NON SELF LOCKING, 125, 180, AND 220 KSI FTU: GENERAL SPECIFICATION FOR |
MS27624 Revision B:2009 | UNION, NIPPLE |
MIL-F-48076 Revision A:1984 | FIN, ASSEMBLY, M158 |
MIL-DTL-16878 Revision H:2012 | WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR |
MIL-STD-2193 Revision C:2012 | Ship Hydraulic System Components |
MIL-DTL-52525 Revision F:2008 | FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR |
MS27076 Revision E:2013 | Nipple, Straight, Swivel Flange |
MIL-I-45914 Revision A:1991 | INSERT, SCREW THREAD - LOCKED IN, KEY LOCKED |
SAE AS 4841 : 2017 | FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION |
SAE AS 604 : 2012 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, HEAVYWEIGHT, HYDRAULIC |
MS27404 Revision C:2017 | ADAPTER, STRAIGHT, REUSABLE, TUBE TO HOSE, LOW PRESSURE |
MIL-R-46631 Revision B:1972 | REMOVER, AIRCRAFT CANOPY, M1A3, ASSEMBLY |
MIL-P-16610 Revision B:1975 | PIN, TAPERED, PLAIN |
MIL-B-913 Base Document:1993 | BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS (METRIC) GENERAL SPECIFICATION FOR |
MS123135 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 1 1/2 INCH, ALUMINUM |
MIL-B-23990 Revision C:1984 | BLOCKS, TACKLE, WIRE ROPE, EXTRA HEAVY DUTY |
MS123126 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 5/8 INCH, ALUMINUM |
MS123128 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 7/8 INCH, ALUMINUM |
GGG-P-463 Revision C:1973 | PLATE, SURFACE, (GRANITE) |
MIL-M-50768 Revision A:1972 | MOVEMENT, D A M ASSEMBLY |
SAE AS 7456 : 2016 | STUDS, STEEL, LOW ALLOY, HEAT TREATED, ROLL THREADED |
EN 4176:2005 | Aerospace series - Lockbolts, 100° countersunk normal head or protruding head, tension- / sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric series - Technical specification |
MIL-R-14821 Base Document:1968 | REMOVER, AIRCRAFT CANOPY. M9 REMANUFACTURED METAL PARTS ASSEMBLY |
GGG-P-840 Revision B:1994 | PUNCHES AND DIES, AND PUNCH AND DIE SETS: METAL CUTTING, HAND; AND PUNCH, CLIP, SHEET METAL |
MS24361 Revision C:2016 | RING, SPLIT - TYPE MA-2, FLIGHT PRESSURE REFUELING, RECEPTION COUPLING |
MS122116THRUMS122155 Revision D:1976 | INSERT CRES HELICAL COIL COARSE THREAD 1 1/2 DIA NOMINAL LENGTH |
MIL-A-2550 Revision B:1973 | AMMUNITION, GENERAL SPECIFICATION FOR |
MIL-B-8948 Revision A:1972 | Bearing, Plain, Rod End, TFE Lined, Self-Aligning |
MIL-P-70543 Revision B:1994 | PROJECTILE, 81MM, ILLUMINATING, M853A1, METAL PARTS |
SAE MA 1547 : 2012 | WRENCHES, TWELVE SPLINE, METRIC |
SAE MA 2537 : 2012 | GROOVE DESIGN, METAL C-RING GASKET, FACE TYPE INTERNAL PRESSURE, METRIC |
MIL-B-85560 Base Document:1983 | BEARING, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN AND FLANGED, SELF LUBRICATING GENERAL SPECIFICATION FOR |
MS123129 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 1 INCH, ALUMINUM |
MIL-DTL-24630 Revision A:2014 | Valves, Check, In-line, for Hydraulic Fluid and Lubricating Oil Fluid, General Specification for |
MIL-DTL-7885-27 Base Document:1996 | RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH SHEAR HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED 8740 ALLOY STEEL SPINDLE (TYPE I, STYLE A, CLASS 3) |
MIL B 85667/3 : A | BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, CRES PH 13-8MO PIN, 220 KSI FTU |
MIL C 83723/90 : C | CONNECTOR, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SOLDER FLANGE MOUNT, THREADED COUPLING, SOLDER PIN CONTACT)(SERIES 1II) |
SAE MA 2538 : 2015 | GASKET, METAL C-RING SEAL NICKEL ALLOY, CORROSION AND HEAT RESISTANT, METRIC PROCUREMENT SPECIFICATION FOR |
SAE AMS 4994 : 2015 | TITANIUM ALLOY POWDERED METAL PRODUCTS, 6AL - 4V, HOT ISOSTATICALLY PRESSED, ANNEALED |
MA1518B : 2012(R2018) | BOLTS, SCREWS & NUTS, EXTERNAL WRENCHING, METRIC THREADS - DESIGN PARAMETERS FOR |
MIL-DTL-3922-59 Revision F:2010 | FLANGES, WAVEGUIDE (CHOKE) (SQUARE, 4 HOLE) |
MIL-B-81936 Base Document:1973 | BEARINGS, PLAIN, SELF ALIGNING (BECU, CRES RACE) |
MS20762 Revision D:2016 | ELBOW, FLARED TUBE, FLANGED, SWIVEL, 90 DEGREES |
SAE AS 7477 : 2017 | BOLTS AND SCREWS, STEEL, UNS S66286 TENSILE STRENGTH 130 KSI, PROCUREMENT SPECIFICATION |
SAE AMS 7913 : 2015 | ALUMINUM-BERYLLIUM ALLOY, SHEET AND PLATE, 38AL - 62BE |
SAE ARP 260 : 2012 (S2018) | CONTROL LEVER CONNECTIONS (60 DEGREES V SERRATIONS) |
SAE AMS 4946 : 2016 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC, 3AL - 2.5V, TEXTURE CONTROLLED, COLD WORKED, STRESS RELIEVED |
MS27612 Revision M:2013 | ADAPTER, HYDRAULIC BLEEDER VALVE, AIRCRAFT WHEEL BRAKE |
MIL-P-60811 Revision B:1984 | PROJECTILE, 105 MM, TP-T, M489 METAL PARTS ASSEMBLY |
MS123132 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 1 1/4 INCH, ALUMINUM |
MS27623 Revision D:2018 | SLEEVE, HOSE COUPLING |
SAE AS 27195 : 2014 | SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-R-7362 |
SAE AS 71051 : 2015 | PIPE THREADS, TAPER, AERONAUTICAL NATIONAL FORM, SYMBOL ANPT - DESIGN AND INSPECTION STANDARD |
SAE AMS 7908 : 2015 | BERYLLIUM NEAR-NET PREFORMS, STANDARD GRADE, HOT ISOSTATIC PRESSED |
SAE AMS 2628 : 2013 | ULTRASONIC IMMERSION INSPECTION, TITANIUM AND TITANIUM ALLOY BILLET, PREMIUM GRADE |
SAE AS 18280 : 2017 | FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
MIL-DTL-32372 Revision A:2016 | Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F |
MIL-PRF-83860 Revision D:2013 | FILTER ELEMENTS, DISPOSABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE |
MIL I 45910 : C | INSERT, SCREW THREAD LOCKED IN & RING LOCKED 1 SERRATED GENERAL SPECIFICATION FOR |
MIL I 45916 : B | INSERT,SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
SAE AS 7468 : 2012 | BOLTS, COBALT-CHROMIUM-NICKEL ALLOY, UNS R30035, TENSILE STRENGTH 260 KSI, PROCUREMENT SPECIFICATION |
SAE AS 7472 : 2015 | BOLTS AND SCREWS, STEEL, CORROSION RESISTANT 125000 PSI TENSILE STRENGTH ROLL THREADED |
SAE AMS 2407 : 2012 | PLATING, CHROMIUM, POROUS |
SAE J 2337-2 : 2017 | CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: STUD END REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS |
MIL-B-85604 Revision A:1988 | BOLT, NICKEL ALLOY 718, TENSION, HIGH STRENGTH, (125 KSI FSU & 220 KSI FTU) HIGH TEMPERATURE, SPLINE DRIVE, GENERAL SPECIFICATION FOR |
MIL-DTL-3922-70 Revision C:2010 | Flanges, Waveguide (Cover) (Square, 4 Hole, Butt Mount) |
MS28753 Revision E:2012 | FITTING END, SELF-SEALING FUEL HOSE, SWIVEL, DETACHABLE, FLANGED, STRAIGHT |
A-A-52200 Base Document:1996 | LINK ASSEMBLY, CONNECTOR, SEPARABLE |
MIL-B-81934 Revision B:1991 | BEARING, SLEEVE, PLAIN AND FLANGED, SELF LUBRICATING |
MIL-P-63409 Base Document:1981 | PROJECTILE, 8 INCH DUMMY M845 |
MIL-DTL-24231 Revision E:2013 | Connectors, Plugs, Receptacles, Adapters, Hull Inserts, and Hull Insert Plugs, Pressure-Proof, General Specification for |
EN ISO 15136-1:2009 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
SAE AS 7467 : 2013 | BOLTS AND SCREWS, NICKEL ALLOY, UNS N07718, TENSILE STRENGTH 185 KSI, STRESS RUPTURE RATED, PROCUREMENT SPECIFICATION |
SAE AMS 4089 : 2014 | ALUMINUM ALLOY, PLATE 1.6CU - 2.2MG - 0.22CR - 5.7ZN (7475-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND PRECIPITATION HEAT TREATED |
SAE AMS 4922 : 2014 | TITANIUM ALLOY, SEAMLESS, HYDRAULIC TUBING 15V - 3.0CR - 3.0AL - 3.0SN COLD WORKED AND PRECIPITATION HEAT TREATED |
AN911 Revision 10:2011 | NIPPLE, PIPE |
MIL-N-85615-3 Base Document:1989 | NUT ASSEMBLY, SELF-SEALING, FLOATING, SELF-LOCKING, 125 KSI FTU, 225 DEGREES F, VARIABLE NUT HEIGHT 1/64 INCHES OVERSIZE (FOR REPAIR) |
MIL-C-46273 Revision B:1990 | CARTRIDGE, DELAY, M70, ASSEMBLY |
MIL-DTL-87104 Revision C:2014 | COAXIAL ASSEMBLIES, GENERAL SPECIFICATION FOR |
MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
MMM-A-132 Revision B:1994 | ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL |
MIL-F-13926 Revision B:1984 | FIRE CONTROL MATERIAL MANUFACTURE AND INSPECTION, GENERAL SPECIFICATION FOR |
MIL-DTL-70329 Revision A:2009 | Nut, Plain, Round, Ball and Roller Bearings, Metric, General Specification for |
MIL-DTL-28804-9 Revision E:2005 | Connectors, Pin Contact, Electric, Rectangular, High Density, Polarized Center Jackscrew, Size 22, Crimp Removable |
MS14056 Revision B:2009 | CONTACTS, ELECTRICAL CONNECTOR, SHIELDED CABLE APPLICATIONS, SIZE 8 |
MIL V 81940/1 : B | VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE LI, SYSTEMS |
MIL-DTL-28748 Revision D:2001 | CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS - GENERAL SPECIFICATION FOR |
MIL-H-7195 Revision G:1991 | HARDWARE, PARACHUTE, GENERAL SPECIFICATION FOR |
MIL-H-8775 Revision D:1976 | HYDRAULIC SYSTEM COMPONENTS, AIRCRAFT AND MISSILES GENERAL SPECIFICATION FOR |
MIL-STD-1312-16 Revision A:1991 | FASTENER TEST METHODS, METHOD 16, CLAMPING FORCE FOR INSTALLATION FORMED FASTENERS |
MIL C 38271 : B | CONNECTOR, OXYGEN MASK TO REGULATOR CRU-60/P |
DOD STD 1312/11 : LATEST | FASTENER, TEST METHODS METRIC, METHOD 11, TENSION FATIGUE (S/S BY DOD STD 1312-111) |
DOD-STD-1312-111 Base Document:1984 | FASTENER TEST METHODS, METRIC METHOD 111, TENSION FATIGUE |
AWS D1.4/D1.4M : 2011 | STRUCTURAL WELDING CODE - REINFORCING STEEL |
NASM25027:2012 | NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
MIL-P-60601 Revision B:1981 | PROJECTILE, 105MM, WP, M416 METAL PARTS ASSEMBLY |
MIL A 5503 : E | ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR |
AWWA E103 : 2015 | HORIZONTAL AND VERTICAL LINE-SHAFT PUMPS |
MIL-STD-1312-14 Base Document:1987 | FASTENER TEST METHODS, METHOD 14, STRESS DUPABILITY INTERNALLY THREADED FASTENERS |
NASM21060:1999 | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEGREES F & 800 DEGREES F |
MIL-DTL-5070-2 Base Document:2007 | Nipple Assembly 45 Degrees, Adapter, Hose to Tube, Reusable, Brazeless, One-Piece Design, Hydraulic, Fuel and Oil Lines, 1/4 through 2 Inch Tube Sizes |
MS9196 Revision C:2015 | TEE, TUBE - SAE-AMS5646, BOSS |
MIL-PRF-32287 Revision A:2011 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT |
MIL S 55620 : 0 | SUBSTRATES, CERAMIC, FOR DEPOSITION OF THIN FILM MICROCIRCUITS |
SAE AS 83819 : 2013 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 1400 CPM (15 FPM), OSCILLATION, -65 TO +160 DEGREES F (-54 TO +71 DEGREES C) |
SAE AMS 3065 : 2011 | COMPOUND, CORROSION PREVENTIVE, THIN FILM, FINGERPRINT REMOVING |
SAE AMS 2642 : 2016 | STRUCTURAL EXAMINATION OF TITANIUM ALLOYS ETCH-ANODIZE INSPECTION PROCEDURE |
API 590 : 1985 | STEEL LINE BLANKS |
MIL-DTL-781 Revision J:2014 | TERMINAL, WIRE ROPE SWAGING, GENERAL SPECIFICATION FOR |
MIL-DTL-46593 Revision B:2006 | Projectile, Calibers .22, .30, .50 and 20MM Fragment-Simulating |
SAE AS 4299 : 2012 | RINGS, RETAINING - SPIRAL WOUND, UNIFORM SECTION CORROSION AND HEAT RESISTANT, UNS S66286 |
SAE AS 7479 : 2013 | BOLTS AND SCREWS, STEEL, UNS S66286, 1650 DEGREES F SOLUTION HEAT TREATED, PRECIPITATION HEAT TREATED BEFORE ROLL THREADED |
SAE AS 4167 : 2016 | WRENCHES; FLARE NUT, CROWFOOT, 12-POINT NON-DISTORTING |
NASM 21045:2004 | NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 450 DEGREES F, 125 KSIFTU |
MIL-R-3211 Revision G:1977 | RACK, STORAGE, SMALL ARMS |
MIL-DTL-45910 Revision D:2015 | INSERT, SCREW THREAD-LOCKED IN AND RING LOCKED, SERRATED GENERAL SPECIFICATION FOR |
MS27237 Revision F:2007 | SHOULDER, SWIVEL FLANGE, ADAPTER, HOSE TO TUBE, HYDRAULIC FUEL AND OIL LINES, 1/2 THROUGH 3 INCHES TUBING SIZES |
MIL F 27272 : B | FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
MIL-DTL-3922-60 Revision D:2013 | Flanges, Waveguide (Choke) (Round, 6 Hole) |
SAE MA 1568 : 2018 | NUT, SELF LOCKING - UNS S66286, 425 DEGREE C AND 650 DEGREE C, 1100 MPA, MJ THREAD, PROCUREMENT SPECIFICATION FOR, METRIC |
SAE ARP 1311 : 2015 | LANDING GEAR STRUCTURES AND MECHANISMS |
SAE J 2337-1 : 2014 | CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH RECESSED CONICAL SEAT REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS |
MIL-F-3541 Revision C:1989 | FITTING, LUBRICATION, GENERAL SPECIFICATION FOR |
SAE AS 4726 : 2017 | NUTS, SELF-LOCKING, UNS S66286 CLASSIFICATION: 220 KSI/850 DEGREE F PROCUREMENT SPECIFICATION |
SAE AS 7466 : 2014 | BOLTS AND SCREWS, NICKEL ALLOY, UNS N07718, TENSILE STRENGTH 185 KSI, FATIGUE RATED, PROCUREMENT SPECIFICATION |
SAE AS 5887 : 2014 | INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED PROCUREMENT SPECIFICATION FOR |
MS27238 Revision B:2007 | Wire, Nut Retaining, Designed for Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines |
MIL-B-8914 Revision B:1966 | BEARING, ROLLER, SELF-ALIGNING, AIRFRAME, ANTIFRICTION |
MIL-B-85667-6 Revision A:1991 | BOLT, SLEEVE, 100 DEGREES REDUCED FLUSH HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, NICKEL ALLOY 718 PIN, 125 KSI FSU, 450 DEGREES F |
WW-T-696 Revision E:1984 | TRAPS, STEAM |
MIL-DTL-32286 Base Document:2008 | MATERIAL, BALL VALVE SEAT SEAL AND THRUST WASHER |
MIL-DTL-3954 Revision D:2015 | DUMMY LOADS, ELECTRICAL, WAVEGUIDE, GENERAL SPECIFICATION FOR |
SAE AS 4459 : 2013 | FITTINGS, TUBE, FLUID SYSTEM 3000 PSIG (21000 KPA) RATED PRESSURE, EXTERNALLY SWAGED, SPECIFICATION FOR |
SAE AS 4897 : 1994 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), LOW PRESSURE, 450 DEGREES F AND FIREPROOF, PROCUREMENT SPECIFICATION FOR |
SAE AS 7458 : 2016 | STUDS, STEEL, LOW ALLOY, HEAT RESISTANT NORMALIZED AND TEMPERED, ROLL THREADED 135000 PSI TENSILE STRENGTH |
SAE AS 4393 : 2015 | NUT, SELF-LOCKING, UNS S66286, 1200 DEGREES F, 160,000 PSI, UNJ THREAD |
MIL-DTL-55041 Revision F:2012 | Switches, Waveguide, General Specification for |
AN6027 Revision 5:2013 | COUPLING HALF, QUICK DISCONNECT |
MIL W 23351 : A | WAVEGUIDE, SINGLE RIDGE AND DOUBLE RIDGE, GENERAL SPECIFICATION FOR |
API 609 CHINESE : 2009 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
SAE MA 2060 : 2015 | FITTINGS, WELDED, HYDRAULIC, TITANIUM AND CORROSION RESISTANT STEEL, 21 000 KPA, METRIC |
SAE AS 4843 : 2016 | FITTINGS, BEADED, FLUID CONNECTION |
SAE AMS 2636 : 2016 | ULTRASONIC IMMERSION INSPECTION TITANIUM AND TITANIUM ALLOY FORGINGS PREMIUM GRADE |
SAE AS 871 : 2012 | MANUFACTURING AND INSPECTION STANDARD FOR PREFORMED PACKINGS (O-RINGS) |
SAE MA 2005 : 2015 | TUBE FITTINGS, AEROSPACE FLUID SYSTEMS, SEPARABLE, FOR 24 DEGREE CONE, GENERAL SPECIFICATION, METRIC |
MIL F 39000 : A | FLANGES, WAVEGUIDE, RIDGE GENERAL SPECIFICATION FOR |
MIL-N-25161 Revision C:1969 | NOZZLE, AERIAL PRESSURE REFUELING, TYPE MA-2 |
MIL-R-5049 Revision D:1989 | RING, WIPER, PISTON ROD |
MIL-N-85729 Base Document:1988 | NUT, SELF-LOCKING, A-286, 160 KSI FTU, 450 DEGREES F, GENERAL SPECIFICATION FOR |
MS27236 Revision B:2007 | Shoulder - Designed for 45 Degrees and 90 Degrees Swivel Nut, Hose to Tube Adapters, Reusable, Hydraulic, Fuel and Oil Lines |
MIL-N-85615 Base Document:1986 | NUT, SEALING, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, GENERAL SPECIFICATION FOR |
MIL-HDBK-660 Revision B:2012 | FABRICATION OF RIGID WAVEGUIDE ASSEMBLIES (SWEEP BENDS AND TWISTS) |
MIL-P-48322 Revision B:1981 | PROJECTILE, 8 INCH HE, RA, M650 AFT WARHEAD SECTION & STRIPPABLE COATING ASSEMBLY |
MIL-DTL-5523 Revision E:2011 | VALVE; RELIEF, HYDRAULIC PRESSURE |
MS20756 Revision F:2011 | FLANGE, SWIVEL, RETAINING |
MS20760 Revision D:2013 | ADAPTER, STRAIGHT, FLANGE TO TUBE |
MIL-P-63137 Revision B:1981 | PROJECTILE, 8-INCH HE, RA, M650 WARHEAD SECTION FORWARD |
MS27239 Revision E:2007 | Nipple, Straight, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 1/4 through 4 Inch Tube Sizes |
MIL-S-63540 Revision C:1995 | STUD, SELF-CLINCHING GENERAL SPECIFICATION FOR |
MIL-C-14810 Base Document:1969 | CARTRIDGE, DELAY, XM86, ASSEMBLY |
MIL C 31031 : 0 | CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES GENERAL SPECIFICATION FOR |
GGG-S-1808 Base Document:1973 | SCREWDRIVER, JEWELLERS, (SWIVEL KNOB, INTERCHANGEABLE BLADES) |
API 609 : 2016 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
MIL-DTL-24704 Revision B:2011 | Flanges, Four-Bolt, Square, for Hydraulic Systems, General Specification for |
MIL-B-85667-9 Base Document:1991 | BOLT, SLEEVE, PROTRUDING HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, CRES A-286 PIN, 95 KSI FSU, 160 KSI FTU, 450 DEGREES F |
MIL-R-71126 Base Document:1992 | RIFLE, 7.62 MILLIMETER, SNIPER W/DAY OPTICAL SIGHT AND CARRYING CASES - M24 |
ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
SAE ARP 1598 : 2013(R2018) | LANDING GEAR SYSTEM DEVELOPMENT PLAN |
MIL-W-5013 Revision L:1991 | WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR |
MIL-DTL-85 Revision K:2011 | WAVEGUIDES, RIGID, RECTANGULAR - GENERAL SPECIFICATION FOR |
MIL-C-46793 Revision C:1992 | CUPOLA BODY ASSEMBLY FOR ARMORED VEHICLE BRIDGE LAUNCHER, M60A1 & M48A5 TANK CHASSIS |
MIL-DTL-7885-13 Base Document:1996 | RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH SHEAR HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE |
MIL-DTL-7034 Revision F:2005 | PULLEYS, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT, GENERAL SPECIFICATION FOR |
MS27087 Revision D:2013 | Elbow, Nipple End, Flared, Tube to Hose - 45 Degrees Swivel Nut |
MIL-DTL-83723-79 Revision E:2010 | Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Flange Mount, Bayonet Coupling, Solder Pin Contact), (Series III, Classes H, J, L, P and Y) |
AN910 Revision 11:2011 | COUPLING, PIPE |
MIL-DTL-83723-89 Revision G:2015 | CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SINGLE HOLE MOUNT, THREADED COUPLING, SOLDER PIN CONTACT), (SERIES 3, CLASSES H, J, L, N, P AND Y) |
MIL-R-70502 Base Document:1984 | RACK STORAGE SMALL SAW, (M13) |
MIL-P-50784 Base Document:1973 | PROJECTILE, 105MM, HE, M1 (HF-1) METAL PARTS ASSEMBLY |
MIL-P-71089 Base Document:1991 | PROJECTILE, PRACTICE, 155 MM, M804E1 LOADING, ASSEMBLING AND PACKING |
MMM-A-134 Base Document:1970 | ADHESIVE EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING |
MS27084 Revision D:2014 | ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 45 DEGREES |
FED-STD-H28-21 Revision B:1984 | Screw-Thread Standards for Federal Services Section 21 Metric Screw-Threads |
DOD STD 100 : C NOTICE 6 | ENGINEERING DRAWING PRACTICES |
MIL-DTL-44481 Revision A:1996 | RELEASE, CARGO PARACHUTE, AIRDROP, M-3 |
AN116 Revision 3:2013 | Shackle, Anchor, Forger Carbon Steel Screw Pin |
MIL-DTL-8789 Revision G:2015 | FITTING END, ATTACHABLE, HYDRAULIC, HIGH PRESSURE (3,000 PSI), GENERAL SPECIFICATION FOR |
NFPA 1981 : 2013 | OPEN-CIRCUIT SELF-CONTAINED BREATHING APPARATUS (SCBA) FOR EMERGENCY SERVICES |
SAE AS 85421 : 2015 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAL, 3000/4000 PSI, GENERAL SPECIFICATION FOR |
MIL P 24705 : A | PENETRATORS, MULTIPLE CABLE, FOR ELECTRICAL CABLES, GENERAL SPECIFICATION FOR |
MIL-DTL-25427 Revision B:2009 | COUPLING ASSEMBLY, HYDRAULIC, SELF SEALING, QUICK DISCONNECT, GENERAL SPECIFICATION FOR |
MIL-T-46590 Revision C:1993 | THRUSTER, CARTRIDGE ACTUATED, M15, METAL PARTS ASSEMBLY |
MIL-STD-1312-11 Revision A:1984 | FASTENER TEST METHODS, METHOD 11, TENSION AND FATIGUE |
DOD-STD-35-36 Revision B:1979 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING |
MS9879 Revision B:2016 | SLEEVE, SWIVEL-PILOTED O-RING TUBE CONNECTION, BRAZING, AMS 5046 |
MIL-DTL-83296 Revision B:2009 | Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic, General Specification for |
MIL-DTL-25027 Revision H:1997 | NUT, SELF-LOCKING, 250 DEG F, 450 DEG F, AND 850 DEG F |
MS21958 Revision D:2011 | Body, Cluster Fitting, Two-Way, 180 Degrees, Internal Boss |
AN775 Revision 14:2011 | BOLT - FLUID PASSAGE |
MIL-DTL-28804 Revision D:1998 | CONNECTORS, PLUG AND RECEPTACLE, ELECTRIC, RECTANGULAR, HIGH DENSITY, POLARIZATION CENTER JACKSCREW - GENERAL SPECIFICATION FOR |
MIL-F-8975 Revision B:1982 | FASTENER, BLIND, HIGH STRENGTH, INSTALLATION FORMED CORROSION RESISTANT STEEL, HEAT RESISTANT STEEL AND TITANIUM, GENERAL SPECIFICATION FOR |
MIL-T-46602 Revision A:1961 | THRUSTER, CARTRIDGE ACTUATED, M19 METAL PARTS ASSEMBLY |
AWS D18.1/D18.1M : 2009 | SPECIFICATION FOR WELDING OF AUSTENITIC STAINLESS STEEL TUBE AND PIPE SYSTEMS IN SANITARY (HYGIENIC) APPLICATIONS |
SAE AS 7461 : 2015 | BOLTS AND SCREWS, TITANIUM ALLOY, 6AL-4V, UNS R56400, FATIGUE-RATED, PROCUREMENT SPECIFICATION FOR |
MIL C 45918 : 0 | CLEVISES AND CONNECTORS (ROD END) |
MIL-DTL-45913 Revision D:2011 | NUTS, SELF-LOCKING, HEXAGON, PREVAILING TORQUE |
MIL-DTL-28754 Revision E:2016 | Connectors, Electrical, Modular, and Component Parts General Specification for |
FF-S-85 Revision D:2005 | Screw, Cap, Slotted and Hexagon Head |
MIL-DTL-83723-90 Revision G:2015 | CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SOLDER OR WELD FLANGE MOUNT, THREADED COUPLING, SOLDER PIN CONTACT), (SERIES 3, CLASSES H, J, L, N, P AND Y) |
ASA/ANSI S2.45:1983 | ELECTRODYNAMIC TEST EQUIPMENT FOR GENERATING VIBRATION-METHOD OF DESCRIBING EQUIPMENT CHARACTERISTICS, |
MIL-N-52110 Revision F:1982 | NOZZLE, FUEL & OIL SERVICING, NONAUTOMATIC SHUTOFF & NOZZLES, FUEL SERVICING AUTOMATIC SHUTOFF |
MIL-P-10388 Revision H:1990 | PIPE FITTING, ONE OR MORE ENDS GROOVED |
MIL-O-60831 Revision C:1989 | OBTURATING BAND, PLASTIC, SPLIT, (MOLDED) |
MIL-T-60229 Revision A:1974 | THRUSTER, CARTRIDGE ACTUATED, M7 METAL PARTS ASSEMBLY |
MIL-L-52325 Revision D:1988 | LAUNCHER, TRANSPORTER, BRIDGE M48A5 OR M60A1 TANK CHASSIS |
MIL-DTL-9395-41 Revision D:2006 | SWITCHES, PRESSURE, GAUGE (TYPE 2), LOW LEVEL TO 1 AMPERE |
MS123120 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 1/4 INCH, ALUMINUM |
MIL-V-24586 Revision A:1985 | VALVE, NEEDLE, SIZE 1/4 INCH AND 1/2 INCH, UNION BONNET CONSTRUCTION |
MIL-DTL-60584 Revision B:2006 | Projectile,155 Millimeter - Smoke, WP, Metal Parts Assembly, M110A2 |
NASM 21056:2015 | NUT, SELF-LOCKING, PLATE, CORNER, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEGREES F & 800 DEGREES F |
MIL-V-27296 Revision C:1993 | VALVE, OXYGEN MASK, COMBINATION INHALATION AND EXHALATION |
MIL-DTL-45916 Revision C:2014 | INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
MIL-B-9946 Revision E:1987 | BIT, SCREWDRIVER, GENERAL SPECIFICATION FOR |
GGG-W-660 Revision A:1973 | SOCKET, SOCKET WRENCH AND ATTACHMENTS (FOR POWER DRIVEN IMPACT WRENCHES) |
MIL-Q-45970 Revision A:1975 | QUALITY ASSURANCE FOR WEAPONS AND SUPPORT MATERIAL |
MS27626 Revision B:2009 | NIPPLE, FLARED, TUBE TO HOSE-SWIVEL NUT |
MS123130 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 1 1/16 INCH, ALUMINUM |
MS9195 Revision B:2010 | ELBOW, TUBE - SAE-AMS5639, BOSS, 45 DEGREES |
A-A-59935-5 Base Document:2013 | Conical Seals, Crush, 37 Degree Flared Tube Fitting, Gold |
MIL-STD-777 Revision F:2012 | SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
SAE AS 5960 : 2013 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC BRAID REINFORCED, 5080 PSI (35000 KPA), 400 DEGREES F (204 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS |
SAE AMS C 81769 : 2015 | CHEMICAL MILLING OF METALS, SPECIFICATION FOR |
SAE AS 39901 : 2012 | BEARINGS, ROLLER, NEEDLE, AIRFRAME, ANTIFRICTION, INCH |
A-A-59935-4 Base Document:2013 | Conical Seals, Crush, 37 Degree Flared Tube Fitting, Corrosion Resistant Steel |
SAE AMS P 5510 : 2013 | O-RING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE 1 HYDRAULIC (-65 TO 160 DEGREES F) |
SAE AS 27197 : 2014 | SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, SILICONE RUBBER, AMS7268 |
SAE AMS 2301 : 2015 | STEEL CLEANLINESS, AIRCRAFT QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE |
SAE MA 4036 : 2012 | RINGS, RETAINING - TAPERED WIDTH, UNIFORM THICKNESS CORROSION RESISTANT, PROCUREMENT SPECIFICATION FOR, METRIC |
SAE MA 620 : 2015 | HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT METRIC |
SAE J 755 : 2015 | MARINE PROPELLER-SHAFT ENDS AND HUBS |
MIL-DTL-26202 Revision E:2006 | LIGHT, MARKER, AIRPORT, SEMIFLUSH, GENERAL SPECIFICATION FOR |
MIL-B-8831 Revision B:1982 | BOLT, 180 KSI FTU AND 180 KSI FSU 450 DEG F PROTRUDING AND FLUSH HEAD, GENERAL SPECIFICATION FOR |
SAE AS 5586 : 2005 | GENERAL REQUIREMENTS FOR HYDRAULIC SYSTEM RESERVOIRS |
MS123133 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 1 5/16 INCH, ALUMINUM |
SAE AMS 3240 : 2011 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 35-45 |
SAE AS 85560 : 2013 | BEARINGS, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN, AND FLANGED, SELF-LUBRICATING; GENERAL SPECIFICATION FOR |
SAE AS 4623 : 2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3,000 PSI, 275 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
SAE AMS 2680 : 2010 | ELECTRON-BEAM WELDING, FOR FATIGUE CRITICAL APPLICATIONS |
MIL-G-15214 Revision E:1980 | GAGE, DEPTH, WRIST, DIVER'S, SELF LUMINOUS DIAL |
MIL-DTL-21338 Revision B:2014 | Washer, Key Retaining, Ball and Roller Bearings |
SAE AMS 2759/6 : 2005 | GAS NITRIDING OF LOW-ALLOY STEEL PARTS |
SAE AS 6235 : 2015 | FACE SEAL GLAND DESIGN, STATIC, O-RING AND OTHER SEALS FOR AEROSPACE HYDRAULIC AND PNEUMATIC APPLICATIONS |
SAE AMS 2675 : 2013 | BRAZING, NICKEL ALLOY FILLER METAL |
SAE AS 82819 : 2013 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 300 CPM OSCILLATION (13 FPM), -65 TO +160 DEGREES F (-54 TO +71 DEGREES C), LINERS LESS THAN 0.015 INCHES |
SAE AS 1576 : 2016 | FITTINGS, WELDED, HYDRAULIC, TITANIUM, CORROSION RESISTANT STEEL AND NICKEL, 3000 PSI HYDRAULIC |
SAE AMS 3054 : 2016 | OIL, LUBRICATING, LOW TEMPERATURE FOR -55 DEGREES C (-67 DEGREES F) SERVICE |
SAE AMS 2412 : 2015 | PLATING, SILVER, COPPER STRIKE, LOW BAKE |
SAE AMS 7911 : 2015 | ALUMINUM BERYLLIUM, PREFORMS HOT ISOSTATIC PRESSED AND HEAT TREATED 38AL - 62BE |
SAE AMS 4355 : 2015 | ALUMINUM ALLOY, DISCONTINUOUSLY REINFORCED HOT ISOSTATICALLY PRESSED SHAPES 2124A/SIC/25P (3[MU]M) (T1P) |
SAE AS 7474 : 2018 | BOLTS AND SCREWS, STEEL, CORROSION RESISTANT, UNS S17400 TENSILE STRENGTH 140 KSI PROCUREMENT SPECIFICATION |
SAE AMS R 7362 : 2012 | NITRILE RUBBER, SYNTHETIC, SOLID, SHEET, STRIP AND FABRICATED PARTS, SYNTHETIC OIL RESISTANT |
SAE MAM 2410 : 2000 | PLATING, SILVER, NICKEL STRIKE, HIGH BRAKE |
SAE AS 81934 : 2016 | BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING |
SAE AS 3506 B: 2014(R2019) | INSERT - SCREW THREAD, THIN WALL, SELF-LOCKING UNS N07718, SILVER PLATED, CLASS: 185 KSI/1025 DEGREES F, PROCUREMENT SPECIFICATION |
SAE J 2337-3 : 2017 | CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: PORT PLUG REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS |
SAE AS 81820 : 2014 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION |
API 599 : 2013 | METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS |
MIL-DTL-83723-80 Revision D:2010 | Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Solder or Weld Flange Mount, Bayonet Coupling, Solder Pin Contact), (Series III, Classes H, J, L, P and Y) |
MS27075 Revision D:2013 | NIPPLE, FLARED, TUBE TO HOSE - SWIVEL NUT |
A-A-51150 Revision B:1996 | "V" BLOCKS AND CLAMPS, SINGLE "V" GROOVE REVERSIBLE CLAMPING |
SAE AS 620 : 2012 | HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT |
AWWA C207 : 2013 | STEEL PIPE FLANGES FOR WATERWORKS SERVICE, SIZES 4 IN. THROUGH 144 IN. (100 MM THROUGH 3,600 MM) |
SAE AMS 2631 : 2017 | ULTRASONIC INSPECTION, TITANIUM AND TITANIUM ALLOY BAR, BILLET AND PLATE |
SAE MA 614 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), METALLIC REINFORCED, 28,000 KPA, 204 DEGREES C, HYDRAULIC, METRIC |
SAE AS 1946 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, UP TO 1500 PSI AND 450 DEGREES F, HYDRAULIC AND PNEUMATIC |
SAE MA 3374 : 2012 | BOLTS AND SCREWS, UNS S66286, CORROSION AND HEAT RESISTANT STEEL, PROCUREMENT SPECIFICATION, METRIC |
MIL P 60547 : F | PROJECTILE, 105 MM, HE, M1 & M760 METAL PARTS ASSEMBLY |
MIL-DTL-60547 Revision G:2008 | PROJECTILE, 105 MM, HE, M1 AND M760 - METAL PARTS ASSEMBLY |
GGG-P-831 Revision F:1995 | PUNCHES; CENTER, DRIVE PIN, ALIGNING, AND PRICK |
MIL-DTL-83413 Revision C:2012 | CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING, GENERAL SPECIFICATION FOR |
JSSG-2009 Revision A:2013 | Air Vehicle Subsystems |
MS27231 Revision B:2007 | Straight Flange Nipple Assembly, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines |
MIL-DTL-13931 Revision J:1999 | Cannon: General Specification for |
MIL-PRF-20042 Revision F:2015 | FLANGES, PIPE, BRONZE (SILVER BRAZING) |
AN912 Revision 10:2011 | BUSHING, PIPE |
NASM8846:2011 | INSERT, SCREW-THREAD, HELICAL COIL |
IPC 6013 GERMAN : B | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR FLEXIBLE PRINTED BOARDS |
API 589 : 1998 | FIRE TEST FOR EVALUATION OF VALVE STEM PACKING |
MIL-DTL-14852 Revision D:2009 | PROJECTILE, 105 MM, ILLUMINATING, M314A3 AND PROJECTILE, 105 MM, INFRARED ILLUMINATING, M1064 METAL PARTS ASSEMBLY |
NASM 7838 : 2004 | BOLT, INTERNAL WRENCHING, 160 KSI FTU |
MS21955 Revision C:2009 | BODY, CLUSTER FITTING, TWO-WAY, 180 DEGREES, FLARE |
MIL-I-8846 Revision D:1994 | INSERT, SCREW THREAD, HELICAL COIL |
MIL-C-22520-28 Base Document:1977 | CRIMPING TOOLS, TERMINAL, HAND OR POWER ACTUATED, WIRE TERMINATION, PNEUMATIC TOOL FOR WIRE BARREL SIZES 20 THROUGH 28 |
IPC 6012 FRENCH : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS |
MIL-P-21143 Revision B:1984 | PIN, STRAIGHT, HEADLESS (DOWEL) |
MIL-B-7838 Revision C:1989 | BOLT, INTERNAL WRENCHING 160 KSI FTU |
MIL-W-63150 Base Document:1977 | WEAPONS AND SUPPORT MATERIAL STANDARD QUALITY ASSURANCE PROVISIONS FOR |
MIL-DTL-28754-94 Revision A:2015 | CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE 4, DIP, 0.4 PITCH, FORMAT C, D AND E |
MIL-T-6845 Revision D:1985 | TUBING, STEEL, CORROSION-RESISTANT (304) AEROSPACE VEHICLE HYDRAULIC SYSTEM 1/8 HARD CONDITION |
MIL-W-45595 Revision D:1985 | WASHER, RECESSED, SADDLE AND SHOULDERED METAL |
MS9483 Revision C:2010 | FERRULE, BRAZING, TUBE FITTING - CRES SAE-AMS5646, STRAIGHT |
MIL-P-46518 Revision D:1979 | PRIMER, ELECTRIC, M73, PARTS FOR |
MIL-DTL-3922-53 Revision E:2010 | FLANGES, WAVEGUIDE (COVER) (SQUARE, 4 HOLE) (CIRCULAR BACK) |
MIL F 52525 : D | FITTING, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP HALVES, GENERAL SPECIFICATION FOR |
MIL-N-8984 Base Document:1972 | NUT, SELF-LOCKING, STEEL, 260 KS1 FTU 450 DEGREES F |
MIL-S-3443 Revision G:1993 | SHOTGUN, 12 GAGE, RIOT TYPE |
DOD-I-63276 Revision A:1983 | INSERT, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC AND RING LOCK SERRATED METRIC |
MIL-DTL-55302 Revision G:2009 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES |
MIL-R-45906 Revision D:1984 | RELEASE, TWO POINTS - SINGLE PULL, PARACHUTIST'S EQUIPMENT PACK |
MS24589 Revision C:2007 | Nipple, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines, 1 through 2 Inches Tubing Sizes |
MIL P 45952 : 0 | PIN,QUICK RELEASE, DETENT GENERAL SPECIFICATION FOR |
MIL-P-45971 Base Document:1975 | PRODUCT ENGINEERING QUALITY ENGINEERING SYSTEM (PEQES) FOR WEAPONS AND SUPPORT MATERIAL |
MIL C 83723/79 : C | CONNECTOR, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT), SERIES III, CLASSES H AND Y) |
DOD-S-70328 Base Document:1982 | SPACER, RING, METRIC GENERAL SPECIFICATION FOR |
MIL-C-82722 Base Document:1982 | CATAPULT, AIRCRAFT EJECTION SEAT, CKU-5/A REWORK ASSEMBLY |
MIL-N-8985 Base Document:1972 | NUT, SELF-LOCKING STEEL, 180 KS1 FTU 450 DEGREES F |
MS21960 Revision D:2011 | Body, Cluster Fitting, Three-Way, Internal Boss |
MS24359 Revision B:2016 | NOSE, PROBE MAST - TYPE MA-2, FLIGHT PRESSURE REFUELING NOZZLE, OUTLINE DIMENSIONS FOR |
MS27625 Revision D:2018 | Wire, Retainer |
MS27639 Revision B:2009 | Disassembly Tool |
AN774 Revision 8:2011 | BOLT - FLARED TUBE FITTING END UNIVERSAL |
MIL-DTL-901 Revision E:2017 | Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and Systems, Requirements for |
AWS D18.3/D18.3M : 2015 | SPECIFICATION FOR WELDING OF TANKS, VESSELS & OTHER EQUIPMENT IN SANITARY (HYGIENIC) APPLICATIONS |
MIL-C-24368 Revision B:1987 | CONNECTOR ASSEMBLIES, PLUGS AND RECEPTACLES, ELECTRIC POWER TRANSFER, SHORE TO SHIP AND SHIP TO SHIP, GENERAL SPECIFICATION FOR |
MS123131 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 1 1/8 INCH, ALUMINUM |
MIL-DTL-22263 Revision C:2009 | Coupling Fuel Line, Flexible, 125 PSI General Specification for |
MIL-H-21367 Revision E:1985 | HULL FITTINGS: CONNECTORS, ADAPTER, END SEALS, AND STUFFING TUBES FOR FLEXIBLE, SOLID-DIELECTRIC, RADIO-FREQUENCY CABLES |
MS21025 Revision F:1996 | NUT, CASTELLATED, HEXAGON |
AN6204 Revision L:2013 | Valve, Hydraulic Bleeder |
MS27769 Revision B:2011 | PLUG, PIPE, COUNTERSUNK HEX HEAD |
MIL C 28754 : D | CONNECTOR, ELECTRICAL, MODULAR AND COMPONENT PARTS, GENERAL SPECIFICATION FOR |
NASM21250:2013 | BOLT, TENSION, STEEL, EXTERNAL WRENCHING, FLANGED, 12-POINT, 180 KSI FTU, 450 DEGREES F |
A-A-59935-3 Base Document:2013 | Conical Seals, Crush, 37 Degree Flared Tube Fitting, Nickel |
A-A-59935-1 Base Document:2013 | Conical Seals, Crush, 37 Degree Flared Tube Fitting, Aluminum Alloy |
MIL P 7034 : D | PULLEY, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT |
MIL-DTL-3928-9 Revision E:2011 | SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE (COAXIAL) (MANUALLY AND MOTOR OPERATED) CLASS 1 (TYPE N CONNECTORS) |
MIL-C-60641 Base Document:1969 | CARTRIDGE, DELAY, M174 ASSEMBLY |
MIL C 915 : F | CABLE AND CORD ELECTRICAL, FOR SHIPBOARD USE GENERAL SPECIFICATIONS FOR |
MIL-I-24783 Base Document:1993 | ISOLATOR, RING TYPE, PRESSURE, FOR SHIPBOARD SEWAGE SERVICE |
A-A-59266 Base Document:1998 | Grinding Machine, Universal, Cylindrical, External, Center-Type |
MS21959 Revision D:2011 | Body,Cluster Fitting, Two-Way, 90 Degrees, Internal Boss |
MS33786 Revision B:2013 | Fitting, Installation, Flared Tube and Hose, Swivel |
MIL C 24643 : A | CABLES AND CORDS ELECTRIC, LOW SMOKE FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
MIL-DTL-12883 Revision F:2003 | Sockets and Accessories for Plug-in Electronic Components, General Specification for |
MIL-B-1083 Revision D:1987 | BALLS, BEARING, FERROUS AND NON-FERROUS (FOR USE IN BEARINGS, VALVES AND BEARING APPLICATIONS) GENERAL SPECIFICATION FOR |
AWS D14.1/D14.1M:2005 | SPECIFICATION FOR WELDING OF INDUSTRIAL AND MILL CRANES AND OTHER MATERIAL HANDLING EQUIPMENT |
MIL-B-11582 Revision C:1978 | BASE PLATE, THEODOLITE: ALUMINUM |
AWS D1.2/D1.2M : 2014 | STRUCTURAL WELDING CODE - ALUMINUM |
MIL-DTL-24694 Revision A:2011 | VALVE, HYDRAULIC RELIEF, 1.5 - 35 BARS (22 - 500 POUNDS PER SQUARE INCH) CARTRIDGE TYPE, GENERAL SPECIFICATION FOR (METRIC) |
MIL-D-46634 Revision B:1990 | DELAY ELEMENT, CARTRIDGE: M5 ASSEMBLY |
MIL-DTL-22442-32 Revision C:2005 | Cable Assembly, Aircraft Audio, Associated Parts |
MIL-H-87111 Revision A:1984 | HEAT SINKS, SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR |
A-A-59935-2 Base Document:2013 | Conical Seals, Crush, 37 Degree Flared Tube Fitting, Copper |
SAE AS 7253 : 2015 | NUTS, SELF-LOCKING, NICKEL ALLOY, UNS N07001 CLASSIFICATION: 180 KSI/1400 DEGREES F, PROCUREMENT SPECIFICATION |
SAE AS 5958 : 2017 | FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM FOR OPERATING PRESSURES UP TO AND INCLUDING 5080 PSI (35 000 KPA), SPECIFICATION FOR |
SAE MA 2241 : 2015 | COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, SELF-BONDING, METRIC |
SAE AS 1975 : 2016 | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems |
SAE AS 4266 : 2013 | HOLE CONTOUR, FLUID PASSAGE, TUBE FITTING |
MIL C 55302 : E | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE |
MIL-F-85720 Base Document:1985 | FITTING, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM, SEAL, GENERAL SPECIFICATION FOR |
SAE AMS 5896 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.55TI (321), SOLUTION HEAT TREATED AND COLD DRAWN, 1/8 HARD TEMPER |
SAE AS 7207 : 2012 | SPRING PINS, TUBULAR, SLOTTED CORROSION AND MODERATE HEAT RESISTANT STEEL PROCUREMENT SPECIFICATION FOR |
SAE AS 7250D : 2013(R2018) | NUTS, SELF-LOCKING, STEEL, CORROSION AND HEAT RESISTANT HIGH STRENGTH, ALL METAL 1200 DEGREES F USE, UN THREAD FORM |
SAE AS 27194C : 2014(S2018) | SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-P-5315 |
NFPA 1982 : 2018 | Standard on Personal Alert Safety Systems (PASS) |
MIL-C-81797 Revision A:1994 | COATING, INORGANICALLY BONDED ALUMINUM (ELECTROPHORECTICALLY DEPOSITED) |
MIL H 52471 : D | HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR |
MIL-DTL-27536 Revision C:1995 | COUPLING, CLAMP, GROOVED, V-BAND |
MIL-DTL-83723 Revision H:2016 | CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING AND HERMETICALLY SEALED, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR |
MS123137 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 1 3/4 INCH, ALUMINUM |
MS123143 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 2 1/2 INCH, ALUMINUM |
MS123141 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 2 1/4 INCH, ALUMINUM |
DOD-S-63275 Revision A:1982 | STUD, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC AND RING LOCK SERRATED METRIC, GENERAL SPECIFICATION FOR |
MIL-P-50569 Revision C:1982 | PROJECTILE, 155MM, HE, ROCKET ASSISTED M549 SERIES, MOTOR BODY BONDING ASSEMBLY FOR |
SAE AS 4983 : 2012 | SPRING, PINS, TUBULAR, COILED CORROSION RESISTANT NICKEL BASE ALLOY PROCUREMENT, SPECIFICATION FOR |
SAE MAP 3440 : 2012 | O-RING GROOVE DESIGN FOR PACKING PREFORMED, ELASTOMERIC O-RING SEALS, STATIC, RADIAL SQUEEZE, METRIC |
SAE MA 1975 : 2015 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID REINFORCED, 135 DEGREE C, STANDARD DUTY, 28000/21000 KPA, HYDRAULIC, AIRCRAFT SYSTEMS |
SAE AMS 2300 L : 2015 | STEEL CLEANLINESS, PREMIUM AIRCRAFT-QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE |
SAE AS 4716C: 2017 | GLAND DESIGN, O-RING AND OTHER SEALS |
SAE AMS 2411 : 2013 | PLATING, SILVER FOR HIGH TEMPERATURE APPLICATIONS |
SAE MA 2093 : 2012 | FITTING END, DIMENSIONS, FLUID SYSTEMS PORT CONNECTION, METRIC |
SAE AS 7473 : 2018 | BOLTS AND SCREWS, ROLL THREADED PROCUREMENT SPECIFICATION FOR |
MIL-L-50794 Base Document:1973 | LINEAR SHAPED CHARGE ASSEMBLY |
MS27072 Revision F:2013 | WIRE, RETAINER |
SAE AS 7455 : 2016 | BOLTS AND SCREWS, STEEL, LOW ALLOY, HEAT RESISTANT HARDENED AND TEMPERED, ROLL THREADED |
AWWA C560:2014 | CAST-IRON SLIDE GATES |
MIL-DTL-81716 Revision A:2009 | PACKING, PREFORMED, STRAIGHT THREADED TUBE FITTING BOSS, TYPE 2 HYDRAULIC (-65 DEGREES F TO +275 DEGREES F) |
MIL-DTL-83517 Revision B:2015 | Connector, Coaxial, Radio Frequency for Coaxial, Strip or Microstrip Transmission Line General Specification for |
MIL-DTL-83723-94 Revision F:2010 | CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SINGLE HOLE MOUNT, BAYONET COUPLING, STRAIGHT PIN CONTACT), (SERIES 3, CLASSES H, AND Y) |
SAE AS 5951 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 5080 PSI (35,000 KPA), 275 DEGREES F (135 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS |
SAE AMS 5914 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND FOIL 52.5NI - 19CR - 3.0MO - 5.0CB - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED PRECISION COLD ROLLED, SOLUTION HEAT TREATED |
SAE AS 4510 : 2013 | FITTINGS, WELD, FLUID CONNECTION, 5000 PSI |
SAE MA 4360 : 2013 | Metric Wrenches: 6 & 12 Point Flare Nut, Non-distorting |
SAE AS 1132 : 2016 | BOLTS, SCREWS AND NUTS - EXTERNAL WRENCHING UNJ THREAD, INCH - DESIGN STANDARD |
SAE AMS 7902 : 2015 | BERYLLIUM SHEET AND PLATE, 98BE |
SAE ARP 5555 : 2016 | RECOMMENDATIONS FOR INSTALLATION OF SEALS IN STANDARD GLANDS |
AND10050 Revision 21:2005 | BOSSES, STRAIGHT DIMENSIONS FOR GASKET SEAL STRAIGHT THREAD |
MIL-DTL-3922-62 Revision D:2010 | FLANGES, WAVEGUIDE (CHOKE) (ROUND, 8 HOLE (2 HOLES CENTERED HORIZONTALLY, 2 HOLES CENTERED VERTICALLY)) |
A-A-59935-6 Base Document:2013 | Conical Seals, Crush, 37 Degree Flared Tube Fitting, Serrated |
MIL-DTL-83798 Revision D:2008 | FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
MS123125 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 9/16 INCH, ALUMINUM |
MIL-DTL-26518 Revision C:2000 | CONNECTORS, ELECTRICAL, MINIATURE, RACK AND PANEL, ENVIRONMENT RESISTANT, 200 DEGREES C AMBIENT TEMPERATURE - GENERAL SPECIFICATION FOR |
SAE AS 4959 : 2018 | BOLTS AND SCREWS, STEEL, UNS S66286 TENSILE STRENGTH 140 KSI 1650 DEGREES F SOLUTION HEAT TREATMENT AGED BEFORE FILLET AND THREAD ROLLING PROCUREMENT SPECIFICATION |
SAE ARP 899 : 2013 | TUBE FITTINGS, FLUID SYSTEMS, PERMANENT TYPE, GENERAL REQUIREMENTS FOR |
DOD-I-63274 Revision A:1983 | INSERT, SCREW THREAD THIN WALL, LOCKED IN, METRIC, GENERAL SPECIFICATION FOR |
MIL-B-45588 Revision A:1972 | BREECH MECHANISM ASSEMBLIES FOR CANNONS, 152 MM GUN-LAUNCHER: M81E1 AND XM162E1 |
MS27637 Revision C:2009 | ELBOW, FLARELESS, TUBE TO HOSE, 45 DEGREES, SWIVEL NUT |
MS123136 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 1 5/8 INCH, ALUMINUM |
MS123139 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 2 INCH, ALUMINUM |
MIL-DTL-3533 Revision C:2009 | RUBBER, SYNTHETIC; SHEET, STRIP AND MOLDED |
MSS SP 129 : 2014 | COPPER-NICKEL SOCKET-WELDING, FITTINGS, AND UNIONS |
MIL A 24533 : B | ACTUATORS, ROTARY HYDRAULIC RACK AND PINION |
MS123142 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 2 3/8 INCH, ALUMINUM |
IPC A 600 FRENCH : H | ACCEPTABILITY OF PRINTED BOARDS |
MIL-DTL-19068 Revision B:2006 | VALVES, SHUTTLE, HYDRAULIC, AIRCRAFT, TYPE 2 SYSTEMS |
MIL-W-13855 Revision D:1973 | WEAPONS, SMALL ARMS AND AIRCRAFT ARMAMENT SUBSYSTEMS, GENERAL SPECIFICATION FOR |
SAE AS 7471 : 2018 | BOLTS AND SCREWS, NICKEL ALLOY, UNS N07001 TENSILE STRENGTH 165 KSI, CORROSION AND HEAT RESISTANT, PROCUREMENT SPECIFICATION |
AN915 Revision 14:2015 | ELBOW, PIPE, 45 DEGREES |
MS123140 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 2 1/8 INCH, ALUMINUM |
MIL-B-81819 Revision B:1987 | BEARING, PLAIN, (SLIDING SPHERICAL, SLEEVE & THRUST) SELF LUBRICATING, HIGH SPEED OSCILLATION, GENERAL SPECIFICATION FOR |
MIL-S-45915 Revision A:1967 | STUD, LOCKED IN - KEY LOCKED - GENERAL SPECIFICATION FOR |
MIL-STD-320 Revision A:1975 | FUSE EXPLOSIVE COMPONENT TERMINOLOGY, DIMENSIONS AND MATERIALS |
MIL F 83296 : 0 | FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, HIGH PRESSURE (3,000 PSI HYDRAULIC AND PNEUMATIC) |
MIL-B-81935 Revision A:1987 | BEARING, PLAIN, ROD END, SELF AND ALIGNING, SELF AND LUBRICATING |
ASME B16.48 : 2015 | LINE BLANKS |
SAE AMS 3241 : 2011 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 55-65 |
SAE AS 4108 : 2018 | T-BOLT AND EYE BOLT, A286 CRES, 1000 DEGREES F FATIGUE RATED |
SAE AS 6116 : 2016 | ALUMINUM FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPERABLE, FLUID SYSTEM, UP TO 1500 PSI (10340 KPA) MAXIMUM, SPECIFICATION FOR |
SAE AS 1371 : 2015 | NUTS, SELF-LOCKING, CORROSION RESISTANT STEEL, HIGH STRENGTH, PREVAILING TORQUE, ALL METAL, 800 DEGREES F (427 DEGREES C) USE, UNJ THREAD FORM |
SAE MA 3375 : 2011 | STUDS, CORROSION AND HEAT RESISTANT STEEL, UNS S66286 TENSILE STRENGTH 900 MPA, PROCUREMENT SPECIFICATION, METRIC, FSC 5307 |
MIL PRF 7891 : F | FILLER VALVE, AIRCRAFT OXYGEN |
MIL-B-7949 Revision E:1981 | BEARING, BALL, AIRFRAME, ANTIFRICTION |
MS21954 Revision C:2015 | BODY, CLUSTER FITTING, TWO-WAY, 90 DEGREE, FLARE |
MS123122 Revision D:2010 | PLUG - STRAIGHT THREAD, O-RING SEAL, 3/8 INCH, ALUMINUM |
MIL B 85667/12 : 0 | BOLT, SLEEVE 100 DEGREE TENSION FLUSH HEAD, STRAIGHT SHANK, CRES 304 SLEEVE, TITANIUM ALLOY PIN, 95 KSI FSU, 160 KSI FTU |
MIL I 45932 : 0 | INSERT, SCREW THREAD, THIN WALL, LOCK IN |
MS17836 Revision E:1991 | Connector, Pneumatic Starter, Duct, Double Ended |
SAE AS 1227 : 2013 | HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, LOW PRESSURE, UP TO 400 DEGREES F, AIRCRAFT |
MS9198 Revision D:2010 | NUT, TUBE COUPLING-CRES SAE-AMS5646 |
MIL N 45913 : B | NUTS, SELF LOCKING, HEXAGON, PREVAILING-TORQUE |
API 599 RUSSIAN : 2013 | METAL PLUG VALVES - FLANGED, THREADED AND WELDING ENDS |
EN ISO 25178-603:2013 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) |
MIL-DTL-12133 Revision E:2015 | WASHER, SPRING TENSION, GENERAL SPECIFICATION FOR |
MIL-G-5514 Revision G:1993 | GLAND DESIGN, PACKINGS, HYDRAULIC GENERAL REQUIREMENTS FOR |
ASME BPE : 2016 | BIOPROCESSING EQUIPMENT |
MIL-F-14847 Revision B:1975 | FUSE, MTSQ, M564 ASSEMBLY LESS BOOSTER PELLET AND CLOSING CUP (LEAD) CHARGE |
MIL-PRF-24453 Revision B:2008 | INHIBITOR, CORROSION, SOLUBLE OIL |
SAE MA 3377 : 2018 | BOLTS AND SCREWS, NICKEL ALLOY UNS N07718, TENSILE STRENGTH 1275 MPA PROCUREMENT SPECIFICATION, METRIC |
SAE AMS 2643 : 2012 | STRUCTURAL EXAMINATION OF TITANIUM ALLOYS, CHEMICAL ETCH INSPECTION PROCEDURE |
SAE AS 45909 : 2015 | STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR |
MIL C 3655 : C | CONNECTOR, PLUG AND RECEPTACLE, ELECTRICAL [COAXIAL SERIES TWIN] AND ASSOCIATED FITTINGS, GENERAL SPECIFICATION FOR |
MS124731THRUMS124770 Revision D:1976 | INSERT, CRES HELICAL COIL FINE THREAD, 2 DIA NOMINAL LENGTH |
MIL C 28748 : B | CONNECTOR, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE AND CRIMP TYPE CONTACTS, GENERAL SPECIFICATION FOR |
SAE AS 4877 : 2017 | BOLTS AND SCREWS, NICKEL ALLOY UNS N07718, CLASSIFICATION: 185 KSI/1200 DEGREES F, PROCUREMENT SPECIFICATION |
MIL I 50362 : A | INITIATOR, CARTRIDGE ACTUATED M8, METAL PARTS ASSEMBLY |
MIL-N-7873 Revision B:1994 | NUT, SELF-LOCKING 1,200 DEG F |
MIL-T-60668 Base Document:1968 | THRUSTER, CARTRIDGE ACTUATED, M18 REMANUFACTURED METAL PARTS ASSEMBLY |
MIL-B-8952 Revision B:1995 | BEARING, ROLLER, ROD END, ANTIFRICTION, SELF-ALIGNING |
SAE AS 4958 : 2013 | PERFORMANCE, NUT, SELF-LOCKING, CASTELLATED, PREVAILING TORQUE, UNJ 16 PITCH THREAD FORM |
MS9194 Revision C:2010 | Elbow, Tube - SAE-AMS5646, Boss, 90 Degrees |
MIL-DTL-24044 Revision C:2013 | FLANGES, COAXIAL LINE, RIGID, AIR DIELECTRIC, GENERAL SPECIFICATION FOR |
MIL L 24560 : 0 | LIGHTS AND GLASSWARE FOR NAVIGATION, SIGNAL AND WARNING, NAVAL SHIPBOARD USE, GENERAL SPECIFICATION FOR |
MIL-N-85615-8 Base Document:1989 | NUT, SELF-SEALING, SELF-LOCKING, ALLOY STEEL, 125 KSI FTU, 250 DEGREES F & 450 DEGREES F |
MIL-PRF-62410 Revision B:2011 | TUBE ASSEMBLY METAL: SWAGED HYDRAULIC, (M1 TANK) |
MIL-F-48625 Revision A:1992 | FUSE, 25MM, POINT DETONATING, SELF-DESTRUCT M758 |
MIL-F-50694 Base Document:1970 | FIRING MECHANISM, CARTRIDGE ACTUATED 29378-1 REMANUFACTURED METAL PARTS ASSEMBLY |
API SPEC 11D1 : 2015 | PACKERS AND BRIDGE PLUGS |
MIL-DTL-32183 Base Document:2004 | CATAPULT, AIRCRAFT EJECTION SEAT: CKU-5C/A REWORK ASSEMBLY |
MIL-T-60669 Base Document:1968 | THRUSTER, CARTRIDGE ACTUATED, M19 REMANUFACTURED METAL PARTS ASSEMBLY |
MIL-PRF-49142 Revision B:2004 | CONNECTOR, TRIAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
IPC 6018 CHINESE : B | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR HIGH FREQUENCY (MICROWAVE) PRINTED BOARD |
MIL-DTL-71172 Revision B:2005 | CYLINDER, RECUPERATOR, RECOIL, M119A1/A2 HOWITZER LIGHT, TOWED: 105 MM |
NASM21076 : 2003 | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEGREES F AND 800 DEGREES F |
GGG-B-500 Revision D:2015 | BLOCK, TACKLE (WIRE ROPE) |
MIL A 83366 : 0 | ANTENNA ASSEMBLIES, AIRBORNE, GENERAL SPECIFICATION FOR |
MIL-DTL-16377 Revision J:2014 | Fixtures, Lighting; and Associated Parts; Shipboard Use, General Specification for |
GGG-W-641 Revision E:1975 | WRENCH, SOCKET; (AND SOCKETS, HANDLES, AND ATTACHMENTS FOR SOCKET WRENCHES: HAND) |
AWS B4.0M : 2000 | STANDARD METHODS FOR MECHANICAL TESTING OF WELDS |
MS33740 Revision C:1999 | NIPPLE, PNEUMATIC STARTING, 3 INCH ID |
MS28755 Revision E:2012 | FITTING END, SELF-SEALING FUEL HOSE, SWIVEL, DETACHABLE, FLANGED, 90 DEGREES |
MIL C 83733 : C | CONNECTOR, ELECTRICAL, MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR |
MIL-S-43012 Revision C:1988 | SAMPLER, SOIL |
MS27283 Revision C:2013 | Contact, Electrical-Plug Connector, Ramp Power, 416/240 Volts, Large, Female |
MIL-DTL-26482 Revision H:2007 | Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for |
AN 839 : 0009 | ELBOW, TUBE TO HOSE, 45 DEGREES |
MIL S 15743 : C | SWITCH, ROTARY, ENCLOSED |
ASTM D 2442 : 1975 : R1996 | Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
ASTM A 1091/A1091M : 2016 : EDT 1 | Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service |
ASTM A 270/A270M : 2015 : REDLINE | Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing |
ASTM D 6132 : 2013 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage |
ASTM E 585/E585M : 2012-06 | SPECIFICATION FOR COMPACTED MINERAL-INSULATED, METAL-SHEATHED, BASE METAL THERMOCOUPLE CABLE |
ASTM E 235/E235M : 2012 | Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications |
ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
ASTM F 2431 : 2004 | Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring |
ASTM D 3835 : 2016 : REDLINE | Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer |
ASTM E 618 : 2007 | Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine |
ASTM F 1357 : 2014 : REDLINE | Standard Specification for Articulating Total Wrist Implants |
ASTM D 6891 : 2015 : REDLINE | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine |
ASTM D 2442 : 1975 : R2007 | Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
ASTM D 2658 : 2004 : R2009 | Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method) |
ASTM B 451 : 1993 | Specification for Copper Foil, Strip, and Sheet for Printed Circuits and Carrier Tapes (Withdrawn 1998) |
ASTM F 2163 : 2001 : R2008 | Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring |
ASTM B 811 : 2013 | Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding |
IEC 63004:2015 | Standard for receiver fixture interface |
FM 3615 : 2018 | EXPLOSIONPROOF ELECTRICAL EQUIPMENT GENERAL REQUIREMENTS |
ASTM F 657 : 1992 : R1999 | Standard Test Method for Measuring Warp and Total Thickness Variation on Silicon Wafers by Noncontact Scanning (Withdrawn 2003) |
MS27622 Revision C:2018 | Socket, Hose Coupling |
ASTM A 503/A503M : 2015 : REDLINE | Standard Specification for Ultrasonic Examination of Forged Crankshafts |
ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
BS IEC 63004:2015 | Standard for receiver fixture interface |
BS EN ISO 25178-2:2012 | Geometrical product specifications (GPS). Surface texture. Areal Terms, definitions and surface texture parameters |
ASTM F 2033 : 2012 : REDLINE | Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials |
NSF 14159-2 : 2014 | HYGIENE REQUIREMENTS FOR THE DESIGN OF HAND HELD TOOLS USED IN MEAT AND POULTRY PROCESSING |
ASTM F 2163 : 2001 : EDT 1 | Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring |
MIL-DTL-39000 Revision C:2013 | Flanges, Waveguide, Ridge, General Specification for |
ASTM F 2163 : 2001 : R2016 | Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring |
AASHTO M 251 : 2006 | SPECIFICATION FOR PLAIN AND LAMINATED ELASTOMERIC BRIDGE BEARINGS |
ASTM F 2511 : 2005 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
ASTM C 1793 : 2015 | Standard Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications |
ASTM A 452 : 1988 | Specification for Centrifugally Cast Austenitic Steel Cold-Wrought Pipe for High-Temperature Service (Withdrawn 1995) |
ASTM C 752 : 2013 : R2016 | Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy |
ASTM F 2935 : 2012 | Standard Specification for Chocks, Panama, Mooring Cast Steel |
AASHTO PP 76 : 2013 | PRACTICE FOR TROUBLESHOOTING ASPHALT SPECIMEN VOLUMETRIC DIFFERENCES BETWEEN SUPERPAVE GYRATORY COMPACTORS (SGCS) USED IN THE DESIGN AND THE FIELD MANAGEMENT OF SUPERPAVE MIXTURES |
DIN EN ISO 25178-2:2012-09 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012) |
DIN EN ISO 25178-603:2014-02 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013) |
SAE AMS4958E : 2017 | TITANIUM ALLOY BARS AND RODS, 3AL - 8V - 6CR - 4MO - 4ZR, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED AND CENTERLESS GROUND OR PEELED AND POLISHED |
SBAC TS 128 : 6 | 'ALL-METAL' SELF-LOCKING NUTS (UNJ THREADS) 1100 MPA (160,000 LBF/IN[2]) MINIMUM TENSILE STRENGTH AT ROOM TEMPERATURE |
ASTM D 2442 : 1975 : R2001 | Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
ASTM D 5379/D5379M : 2012 : REDLINE | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
NSF 14159-3 : 2010 | HYGIENE REQUIREMENTS FOR THE DESIGN OF MECHANICAL BELT CONVEYORS USED IN MEAT AND POULTRY PROCESSING EQUIPMENT |
SBAC TS 220 : 1 | TECHNICAL SPECIFICATION FOR UNION NUTS, SELF-LOCKING (UNIFIED THREADS) - HIGH TEMPERATURE NICKEL ALLOY INCONEL 718 CLASSIFICATION R[M] >= 1270 MPA (185000 LBF/IN[2]) @ T[A]/+705 DEGREES C |
BS EN 4176:2005 | Aerospace series. Lockbolts, 100° countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating. Collars in titanium TI-P99002 or aluminium alloy 2024. Metric series. Technical specification |
ASTM C 1624 : 2005 : R2015 | Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing |
ASTM D 3115 : 1995 : R2005 | Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear |
ASTM F 2162 : 2001 : R2016 | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
ASTM F 2246 : 2006 : EDT 1 | Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage |
ASTM F 2443 : 2004 | Standard Specification for Roller, Bearing, Needle Ferrous, Solid, Spherical End |
ASTM E 1685 : 2013 : REDLINE | Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique |
ASTM G 121 : 1998 | Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents |
ASTM F 2111 : 2001 : REV A : R2017 | Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes |
ASTM G 118 : 2002 : R2015 | Standard Guide for Recommended Format of Wear Test Data Suitable for Databases (Withdrawn 2016) |
ASTM B 736 : 2000 | Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock |
ASTM C 1624 : 2005 | Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing |
ASTM G 121 : 1998 : R2010 : EDT 1 | Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents |
ASTM D 2658 : 2004 : R2013 | Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method) |
ISO 25178-603:2013 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments |
ASTM F 2111 : 2001 : REV A : R2005 : EDT 1 | Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes |
ASTM D 3115 : 1995 | Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear |
CSA HPIT 1 : 2015 | COMPRESSED HYDROGEN POWERED INDUSTRIAL TRUCK ON-BOARD FUEL STORAGE AND HANDLING COMPONENTS |
ASTM G 122 : 1996 : R2008 | Standard Test Method for Evaluating the Effectiveness of Cleaning Agents |
CSA C22.2 No. 145 : 2011 | ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS |
ASTM F 2162 : 2001 | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
ASTM F 1387 : 1999 : R2012 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
ASTM B 736 : 2000 : R2006 | Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock (Withdrawn 2015) |
ASTM E 1235 : 2012 : REDLINE | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
ASTM F 936 : 1985 : R1991 | Specification for Chocks, Panama, Mooring Cast Steel (Withdrawn 1997) |
SAE MA 1573 : 2016 | NUT, SELF-LOCKING, STEEL, CLASS 1100 MPA/235 DEGREES C, MJ THREAD PROCUREMENT SPECIFICATION FOR, METRIC |
ASME Y14.5 : 2009 | DIMENSIONING AND TOLERANCING |
MIL-DTL-83723-93 Revision D:2010 | Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Solder or Weld Flange Mount, Bayonet Coupling, Straight Pin Contact),(Series III, Classes H and Y) |
ISO/TR 22335:2007 | Surface chemical analysis Depth profiling Measurement of sputtering rate: mesh-replica method using a mechanical stylus profilometer |
ASTM D 2658 : 2004 | Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method) |
ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
ASTM F 2511 : 2005 : EDT 1 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
ASTM F 2111 : 2001 : REV A : R2011 | Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes |
ASTM F 1801 : 1997 | Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials |
ASTM D 3115 : 1995 : R2009 | Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear |
ASTM D 2442 : 1975 : R2016 | Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
ASTM F 2246 : 2006 | Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage |
ASTM F 915 : 1985 | Specification for Bitts, Ship Mooring, Cast Steel (Double Barrel) (Withdrawn 1995) |
ASTM F 2431 : 2004 : R2018 | Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring |
ASTM C 752 : 2013 | Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy |
ASTM G 121 : 1998 : R2015 : EDT 1 | Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents |
ASTM G 118 : 2002 : R2007 | Standard Guide for Recommended Format of Wear Test Data Suitable for Databases |
ASTM C 617/C617M : 2015 : REDLINE | Standard Practice for Capping Cylindrical Concrete Specimens |
BS EN ISO 25178-603:2013 | Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments |
ASTM F 1801 : 1997 : R2004 | Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials |
ASTM D 7078/D7078M : 2012 : REDLINE | Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method |
CSA Z245-12 : 2017 | STEEL FLANGES |
ASTM F 2083 : 2012 : REDLINE | Standard Specification for Knee Replacement Prosthesis |
MIL-B-18558 Revision B:1988 | Bearing, Propulsion Line Shaft, Oil Disc Lubricated |
ASTM F 1801 : 1997 : R2009 : EDT 1 | Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials |
ASTM F 2590 : 2006 | Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type |
ASTM A 660/A660M : 2011 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
CSA HPIT 1:15 (R2020) | Compressed hydrogen powered industrial truck on-board fuel storage and handling components |
AISC 303 : 0 | CODE OF STANDARD PRACTICE FOR STRUCTURAL STEEL BUILDINGS AND BRIDGES |
ASTM F 3226/F3226M : 2016 : EDT 1 | Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems |
ASTM A 660 : 1996 : R2005 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
ASTM F 2665 : 2009 : R2014 | Standard Specification for Total Ankle Replacement Prosthesis |
ASTM F 1106 : 1987 : R1998 | Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head) |
ASTM D 7264/D7264M : 2015 : REDLINE | Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials |
MIL-DTL-83723-88 Revision E:2010 | Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Flange Mount, Threaded Coupling, Solder Pin Contact), (Series III, Classes H, J, L, N, P and Y) |
BS 7011-2.2:1998 | Consumable accessories for light microscopes. Slides Specification for materials and quality of finish |
VDI 2840:2005-11 | Carbon films - Basic knowledge, coating types and properties |
SAE AMS 2438 : 2015 | PLATING, CHROMIUM, THIN, HARD, DENSE DEPOSIT |
ASTM E 235/E235M : 2012 : R2018 | Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications |
ASTM D 3115 : 1995 : R2014 | Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear (Withdrawn 2019) |
ASME B89.1.6 : 2002 : R2012 | MEASUREMENT OF PLAIN INTERNAL DIAMETERS FOR USE AS A MASTER RINGS OR RING GAGES |
ASTM D 2442 : 1975 : R2012 | Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
ASTM E 74 : 2013 | Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines |
ASTM E 1234 : 2012 : REDLINE | Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
ASTM F 2665 : 2009 | Standard Specification for Total Ankle Replacement Prosthesis |
ASTM C 1624 : 2005 : R2010 | Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing |
ASTM G 121 : 1998 : R2004 | Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents |
BS EN ISO 15136-1:2001 | Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
ASTM F 1387 : 1999 : R2005 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
MIL-DTL-83723-81 Revision F:2010 | Connectors, Electrical, (Circular, Environment Resisting), Receptacle, (Single Hole Mount, Bayonet Coupling, Solder Pin Contact), (Series III, Classes H, J, L, P and Y) |
NSF 14159-1 : 2014 | HYGIENE REQUIREMENTS FOR THE DESIGN OF MEAT AND POULTRY PROCESSING EQUIPMENT |
PD ISO/TR 22335:2007 | Surface chemical analysis. Depth profiling. Measurement of sputtering rate. Mesh-replica method using a mechanical stylus profilometer |
ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
ASTM B 811 : 2013 : EDT 1 | Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding |
ASME PCC 1 : 2013 | GUIDELINES FOR PRESSURE BOUNDARY BOLTED FLANGE JOINT ASSEMBLY |
ASTM G 118 : 2002 | Standard Guide for Recommended Format of Wear Test Data Suitable for Databases |
ASTM C 1783 : 2015 | Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications |
CSA C22.2 No. 145 : 2011 : INC : UPD 1 : 2017 : R201500 | ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS |
ASTM F 2246 : 2006 : R2013 | Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage |
ASTM D 6132 : 2013 : R2017 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage |
ASTM F 1387 : 1999 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
ASTM E 839 : 2011 | Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable |
ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
ASTM F 2590 : 2006 : R2013 | Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type |
ASTM G 122 : 1996 : R2002 | Standard Test Method for Evaluating the Effectiveness of Cleaning Agents |
ASTM F 2111 : 2001 : REV A | Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes |
ASTM F 2887 : 2017 : REDLINE | Standard Specification for Total Elbow Prostheses |
CSA C22.2 No. 145 : 2011 : R2015 | ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS |
ISO 18139:2017 | Ships and marine technology — Globe valves for use in low temperature applications — Design and testing requirements |
MIL-DTL-50700 Revision A:2005 | Initiator, Propellant Actuated, JAU-2/A25 |
ASTM F 1106 : 1987 : R2006 | Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head) |
ASTM F 3226/F3226M : 2016 | Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems |
AASHTO PP 76 : 2013 : R2015 | PRACTICE FOR TROUBLESHOOTING ASPHALT SPECIMEN VOLUMETRIC DIFFERENCES BETWEEN SUPERPAVE GYRATORY COMPACTORS (SGCS) USED IN THE DESIGN AND THE FIELD MANAGEMENT OF SUPERPAVE MIXTURES |
AASHTO T 312 : 2015 | METHOD OF TEST FOR PREPARING AND DETERMINING THE DENSITY OF ASPHALT MIXTURE SPECIMENS BY MEANS OF THE SUPERPAVE GYRATORY COMPACTOR |
ASME B31.3:2016 | PROCESS PIPING |
ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
ASTM A 578/A578M : 2017 : REDLINE | Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications |
ASTM G 122 : 1996 | Standard Test Method for Evaluating the Effectiveness of Cleaning Agents |
BS ISO 18139:2017 | Ships and marine technology. Globe valves for use in low temperature applications. Design and testing requirements |
ASTM F 2215 : 2015 : REDLINE | Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications |
ASTM F 2431 : 2004 : R2012 | Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring |
ASTM F 2162 : 2001 : EDT 1 | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
ASTM D 6925 : 2015 : REDLINE | Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor |
ASTM F 2163 : 2001 | Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring |
ASTM F 2332 : 2006 : R2013 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
ASTM A 660 : 1996 : R2010 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
ASTM B 811 : 2013 : R2017 | Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding |
ASTM F 2162 : 2001 : R2008 | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
ASTM A 660 : 1996 : R2001 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
ASTM D 7127 : 2017 : REDLINE | Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument |
ASME B89.1.6 : 2002 : R2007 | MEASUREMENT OF PLAIN INTERNAL DIAMETERS FOR USE AS A MASTER RINGS OR RING GAGES |
NEMA PR 4 : 83(R1989) | PLUGS, RECEPTACLES, AND CABLE CONNECTORS OF THE PIN AND SLEEVE TYPE FOR INDUSTRIAL USE |
ANSI/NEMA FB 11-2000 | PLUGS, RECEPTACLES AND CONNECTORS OF THE PIN AND SLEEVE TYPE FOR HAZARDOUS LOCATIONS |
ASTM D 3115 : 1995 : R2000 | Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear |
ASTM D 3410/D3410M : 2016 : REDLINE | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading |
ASTM E 2181/E2181M : 2011 | Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable |
ASTM E 618 : 2007 : R2013 | Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine |
ASTM G 122 : 1996 : R2015 : EDT 1 | Standard Test Method for Evaluating the Effectiveness of Cleaning Agents |
ASTM F 937 : 1985 : R1991 | Specification for Chocks, Ship Mooring Cast Steel (Withdrawn 1997) |
AASHTO LRFDLTS 1 : 1900 | LRFD SPECIFICATIONS FOR STRUCTURAL SUPPORTS FOR HIGHWAY SIGNS, LUMINAIRES, AND TRAFFIC SIGNALS |
ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
ASTM A 1091/A1091M : 2016 | Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service |
ASTM D 3966/D3966M : 2007 : R2013 : EDT 1 | Standard Test Methods for Deep Foundations Under Lateral Load |
ASTM F 2511 : 2005 : R2013 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
ASTM F 2936 : 2012 | Standard Specification for Chocks, Ship Mooring, Cast Steel |
ASTM F 2162 : 2001 : EDT 2 | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
ASTM E 74 : 2013 : REV A | Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines |
ASTM E 2821 : 2013 | Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed Cable Used in Industrial Resistance Thermometers |
ASTM F 2590 : 2006 : EDT 1 | Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type |
ASTM A 660 : 1996 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
ASTM B 372 : 2017 : REDLINE | Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube |
ASTM F 2332 : 2006 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
ASTM F 1801 : 1997 : R2014 | Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials |
ASTM F 2111 : 2001 | Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes |
ASTM E 839 : 2011 : R2016 : EDT 1 | Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable |
ASTM F 2443 : 2004 : R2012 | Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End |
ASTM A 660/A660M : 2011 : R2016 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
ASTM E 1235M : 1995 | Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft [Metric] (Withdrawn 2000) |
ASTM F 1106 : 1987 : R2012 | Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head) |
ASTM D 1238 : 2013 : REDLINE | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASME B89.1.6 : 2002 | MEASUREMENT OF PLAIN INTERNAL DIAMETERS FOR USE AS A MASTER RINGS OR RING GAGES |
SAE AS 955 : 2012 | METRIC SOCKETS, WRENCHES, HAND TWELVE POINT, HIGH STRENGTH, THIN WALL |
PREN 4176 : 200P1 | AEROSPACE SERIES - LOCKBOLTS, 100 DEGREE COUNTERSUNK NORMAL HEAD OR PROTRUDING HEAD, TENSION- / SHEARTYPE, CLOSE TOLERANCE, IN TITANIUM ALLOY TI-P64001, ANODIZED OR WITH ALUMINIUM PIGMENTED COATING - COLLARS IN TITANIUM TI-P99002 OR ALUMINIUM ALLOY 2024 - METRIC SERIES - TECHNICAL SPECIFICATION |
PIP VESBI002 : 2017 | DESIGN AND FABRICATION OF BULK SOLIDS PRODUCT CONTAINERS |
ASME B89.1.6M : 84(R1997) | MEASUREMENT OF QUALIFIED PLAIN INTERNAL DIAMETERS FOR USE AS MASTER RINGS AND RING GAGES |
ASME B18.8.100M:2000 | SPRING PINS: COILED TYPE, SPRING PINS: SLOTTED, MACHINE DOWEL PINS: HARDENED GROUND, AND GROOVED PINS (METRIC SERIES) |
ASME B18.29.1 : 2010 : R2017 | Helical Coil Screw Thread Inserts--Free Running and Screw Locking (Inch Series) (B18.29.1 - 2010) |
ASME Y14.36M : 1996 (R2008) | SURFACE TEXTURE SYMBOLS |
ASME B40.200:2008(R2013) | Thermometers, Direct Reading and Remote Reading <br> |
ASME B16.47 : 2017 | LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
ASME B94.55M : 1985 : R2009 | TOOL LIFE TESTING WITH SINGLE-POINT TURNING TOOLS |
NASA MSFC SPEC 3679 : 2012 | PROCESS SPECIFICATION - WELDING AEROSPACE HARDWARE |
ASME Y14.5.1M : 1994 : R2012 | MATHEMATICAL DEFINITION OF DIMENSIONING AND TOLERANCING PRINCIPLES |
ASME B1.16M : 1984 : R2016 | GAGES AND GAGING FOR METRIC M SCREW THREADS |
ASME B89.1.13 : 2013 | Micrometers |
ASME B18.8.200M : 2000 | COTTER PINS, HEADLESS CLEVIS PINS, AND HEADED CLEVIS PINS (METRIC SERIES) |
ASME B18.29.1 : 2010 | HELICAL COIL SCREW THREAD INSERTS - FREE RUNNING AND SCREW LOCKING (INCH SERIES) |
ASME Y14.46 : 2017 | PRODUCT DEFINITION FOR ADDITIVE MANUFACTURING |
NASA SSTD 8070 0126 : 2014 | TUBING SYSTEMS FOR FACILITY SYSTEMS, SPECIAL TEST EQUIPMENT, AND AEROSPACE HARDWARE |
I.S. EN ISO 25178-2:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 2: TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS (ISO 25178-2:2012) |
ASME B5.62M : 2016 | HOLLOW TAPER TOOLING WITH FLANGE-FACE CONTACT |
NASA KSC GP 435 VOL 2 : 1993 | ENGINEERING DRAWING PRACTICES - VOLUME 2: FACILITIES |
API 616 REDLINE : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
NASA KSC SPEC Z 0007 : 1994 | TUBING, STEEL, CORROSION RESISTANT TYPES 304 AND 316, SEAMLESS, ANNEALED, SPECIFICATION FOR |
ASME B1.22M : 1985 : R2006 | GAGES AND GAGING FOR MJ SERIES METRIC SCREW THREADS |
ASME B1.22M : 1985 : R2016 | GAGES AND GAGING FOR MJ SERIES METRIC SCREW THREADS |
ASME B1.16M : 1984 : R2001 | GAGES AND GAGING FOR METRIC M SCREW THREADS |
ASME Y14.5.1M : 1994 | MATHEMATICAL DEFINITION OF DIMENSIONING AND TOLERANCING PRINCIPLES |
ASME B107.500 : 2010 | PLIERS |
ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
ASME B1.3 : 2007 : R2012 | SCREW THREAD GAGING SYSTEMS FOR ACCEPTABILITY: INCH AND METRIC SCREW THREADS (UN, UNR, UNJ, M, AND MJ) |
ASME B1.2 : 1983 : R2017 | GAGES AND GAGING FOR UNIFIED INCH SCREW THREADS |
ASME B1.3 : 2007 | SCREW THREAD GAGING SYSTEMS FOR ACCEPTABILITY: INCH AND METRIC SCREW THREADS (UN, UNR, UNJ, M, AND MJ) |
ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
API 609 REDLINE : 2009 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
ASME B1.2 : 1983 : R2007 | GAGES AND GAGING FOR UNIFIED INCH SCREW THREADS |
NASA STD 6002 : 2008 | APPLYING DATA MATRIX IDENTIFICATION SYMBOLS ON AEROSPACE PARTS |
PIP VECBI001 : 2009 | SELECTION AND PURCHASE OF BULK SOLIDS PRODUCT CONTAINERS |
AISC 360 : 2016 | SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS |
NASA STD 5006 : 2015 | GENERAL FUSION WELDING REQUIREMENTS FOR AEROSPACE MATERIALS |
TAPPI T 575 : 2013 | ROUGHNESS OF PAPER AND PAPERBOARD, STYLUS (EMVECO-TYPE) METHOD |
SSPC-PA 17 : 2012 | PROCEDURE FOR DETERMINING CONFORMANCE TO STEEL PROFILE/SURFACE ROUGHNESS/PEAK COUNT REQUIREMENTS |
ASME Y14.5M : 1994 : R2004 | DIMENSIONING AND TOLERANCING |
API MPMS CH 14.3.1:2012(R2017) | ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS - CONCENTRIC, SQUARE-EDGED ORIFICE METERS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES |
ASME Y14.5M:1994 | DIMENSIONING AND TOLERANCING |
API MPM CH14.3.1 : 2012 : INC : ERR 1 : 2013 | ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS - CONCENTRIC, SQUARE-EDGED ORIFICE METERS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES |
ASME B89.1.5 : 1998 : R2014 | MEASUREMENT OF PLAIN EXTERNAL DIAMETERS FOR USE AS MASTER DISCS OR CYLINDRICAL PLUG GAGES |
ASME Y14.36M : 1996 | SURFACE TEXTURE SYMBOLS |
NASA PRC 8001 : 2013 | PROCESS SPECIFICATION FOR DRY-FILM LUBRICANT APPLICATION |
NASA SSTD 8070 0098 : 2012 | MACHINE SHOP TOLERANCES |
ASME B1.2 : 1983 : R2001 | GAGES AND GAGING FOR UNIFIED INCH SCREW THREADS |
PIP RESP004 : 2014 | LIQUID RING VACUUM PUMPS AND COMPRESSORS SPECIFICATION |
IPC 6013 CHINESE : B | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR FLEXIBLE PRINTED BOARDS |
ASME B107.37 : 2003 | PLIERS: WIRE CUTTERS/STRIPPERS |
ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
ASME B18.29.2M:2005 | HELICAL COIL SCREW THREAD INSERTS: FREE RUNNING AND SCREW LOCKING (METRIC SERIES) |
ASME B18.29.2M : 2005 : R2017 | HELICAL COIL SCREW THREAD INSERTS: FREE RUNNING AND SCREW LOCKING (METRIC SERIES) |
ASME B89.1.5 : 1998 : R2004 | MEASUREMENT OF PLAIN EXTERNAL DIAMETERS FOR USE AS MASTER DISCS OR CYLINDRICAL PLUG GAGES |
ASME B1.22M : 1985 : R2001 | GAGES AND GAGING FOR MJ SERIES METRIC SCREW THREADS |
ASME B18.8.100M : 2000 : R2005 | SPRING PINS: COILED TYPE, SPRING PINS: SLOTTED, MACHINE DOWEL PINS: HARDENED GROUND, AND GROOVED PINS (METRIC SERIES) |
ASME B18.8.200M : 2000 : R2010 | COTTER PINS, HEADLESS CLEVIS PINS, AND HEADED CLEVIS PINS (METRIC SERIES) |
ASME Y14.5.1M : 1994 : R2004 | MATHEMATICAL DEFINITION OF DIMENSIONING AND TOLERANCING PRINCIPLES |
ASME B40.200 : 2008 | THERMOMETERS, DIRECT READING AND REMOTE READING |
ASME Y14.43 : 2011 | DIMENSIONING AND TOLERANCING PRINCIPLES FOR GAGES AND FIXTURES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
ASME B1.22M : 1985 : R2011 | GAGES AND GAGING FOR MJ SERIES METRIC SCREW THREADS |
DSCC 85136 : E | HEAT SINKS, ELECTRICAL-ELECTRONIC COMPONENT, FIN STOCK, ALUMINIUM ALLOY |
ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
I.S. EN ISO 15136-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
ASME B18.3 : 2012 | SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES) |
PIP VECBI001 : 2009 : R2017 | SELECTION AND PURCHASE OF BULK SOLIDS PRODUCT CONTAINERS |
ASME B107.110 : 2012 | SOCKET WRENCHES, HANDLES, AND ATTACHMENTS |
API MPM CH14.3.1:2012 | ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS - CONCENTRIC, SQUARE-EDGED ORIFICE METERS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES |
DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
ASME B1.3 : 2007 : R2017 | SCREW THREAD GAGING SYSTEMS FOR ACCEPTABILITY: INCH AND METRIC SCREW THREADS (UN, UNR, UNJ, M, AND MJ) |
ASME Y14.36M : 1996 : R2002 | SURFACE TEXTURE SYMBOLS |
ASME B94.55M : 1985 : R2003 | TOOL LIFE TESTING WITH SINGLE-POINT TURNING TOOLS |
ASME B18.8.200M : 2000 : R2005 | COTTER PINS, HEADLESS CLEVIS PINS, AND HEADED CLEVIS PINS (METRIC SERIES) |
ASME B18.8.100M : 2000 : R2010 | SPRING PINS: COILED TYPE, SPRING PINS: SLOTTED, MACHINE DOWEL PINS: HARDENED GROUND, AND GROOVED PINS (METRIC SERIES) |
NASA KSC STD Z 0008 : 1996 | DESIGN OF GROUND LIFE SUPPORT SYSTEMS AND EQUIPMENT, STANDARD FOR |
ASME B1.16M : 1984 : R2011 | GAGES AND GAGING FOR METRIC M SCREW THREADS |
ASME B1.16M : 1984 : R2006 | GAGES AND GAGING FOR METRIC M SCREW THREADS |
ARPM OS 1-1 : 2017 | OIL SEAL TECHNICAL BULLETIN - SHAFT REQUIREMENTS FOR ROTARY LIP SEALS |
ISO/IEC Guide 98:1993 | Guide to the expression of uncertainty in measurement (GUM) |
SAE J 111 : 1997 | SEALS - TERMINOLOGY OF RADIAL LIP |
ISO 2632-1:1975 | Roughness comparison specimens Part 1: Turned, ground, bored, milled, shaped and planed |
ANSI B211.1 : 1986 | SURFACE INTEGRITY |
ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
ISO 3274:1996 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments |
ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
ISO 5436-1:2000 | Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 1: Material measures |
ISO/TS 16610-30:2009 | Geometrical product specifications (GPS) Filtration Part 30: Robust profile filters: Basic concepts |
ASTM F 2033 : 2012 : REDLINE | Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.