BS EN 61249-2-1:2005

1 Scope
2 Normative references
3 Materials and construction
   3.1 Resin system
   3.2 Reinforcement
   3.3 Metal foil
4 Internal marking
5 Electrical properties
6 Non-electrical properties of the copper-clad laminate sheet
   6.1 Appearance of the copper-clad sheet
       6.1.1 Indentations (pits and dents)
       6.1.2 Wrinkles
       6.1.3 Scratches
       6.1.4 Raised areas
       6.1.5 Surface waviness
   6.2 Appearance of the unclad face
   6.3 Laminate thickness, including copper foil
   6.4 Bow and twist
   6.5 Properties related to the copper foil bond
   6.6 Punching and machining
   6.7 Dimensional stability
   6.8 Sheet sizes
       6.8.1 Typical sheet sizes
       6.8.2 Tolerances for sheet sizes
   6.9 Cut panels
       6.9.1 Size tolerance for cut panels
       6.9.2 Rectangularity of cut panels
7 Non-electrical properties of the base material after
   complete removal of the copper foil
   7.1 Appearance of the dielectric base material
   7.2 Flexural strength
   7.3 Flammability
       7.3.1 Material 61249-2-1-1
       7.3.2 Material 61249-2-1-2
   7.4 Water absorption
   7.5 Measling
   7.6 Glass transition temperature and cure factor
8 Quality assurance
   8.1 Quality system
   8.2 Responsibility for inspection
   8.3 Qualification inspection
   8.4 Quality conformance inspection
   8.5 Certificate of conformance
   8.6 Safety data sheet
9 Packaging and marking
10 Ordering information
Annex ZA (normative) Normative references to international
                     publications with their corresponding
                     European publications
Tables

Provides requirements for properties of phenolic cellulose paper reinforced copper-clad laminated sheets, economic grade in thickness of 0,8 mm up to 3,2 mm.

This part of IEC 61249 gives requirements for properties of phenolic cellulose paper reinforced copper-clad laminated sheets, economic grade in thicknesses of 0,8 mm up to 3,2 mm. This standard covers materials with different requirements on flammability, designated according to the following: Material 61249-2-1-1: general purpose grade, requirement on flammability not specified; and Material 61249-2-1-2: materials of defined flammability (vertical burning test). These grades of material cover one of two flammability requirements, designated at FV0 or FV1.