• There are no items in your cart

BS EN 858-1:2002

Current

Current

The latest, up-to-date edition.

Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

03-21-2005

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classes of separators
5 Nominal sizes
6 Requirements
   6.1 General
   6.2 Materials
        6.2.1 General
        6.2.2 Concrete
        6.2.3 Metallic materials
        6.2.4 Plastic materials
        6.2.5 Sealing materials
        6.2.6 Coatings/linings
        6.2.7 Chemical resistance
        6.2.8 Reaction to fire
   6.3 Design requirements
        6.3.1 Area of the separator or sludge trap
        6.3.2 Watertightness of components
        6.3.3 Accessibility
        6.3.4 Water seals
        6.3.5 Pipes and pipe joints
        6.3.6 Internal components
        6.3.7 Sludge traps
        6.3.8 Access covers
   6.4 Structural stability
        6.4.1 General
        6.4.2 Separator systems made of unreinforced concrete,
              fibre-reinforced concrete, reinforced concrete
        6.4.3 Separator systems made of glass fibre-reinforced
              plastics
   6.5 Functional requirements
        6.5.1 General
        6.5.2 Storage capacity for light liquids
        6.5.3 Automatic closure devices
        6.5.4 Automatic warning devices and additional devices
        6.5.5 Separators with a bypass device
        6.5.6 Determination of the nominal size and class
   6.6 Marking
        6.6.1 Separator systems
        6.6.2 Automatic closure devices, automatic warning devices
7 Manufacturer's product information
8 Test methods
   8.1 Materials
        8.1.1 Concrete
        8.1.2 Plastics materials
        8.1.3 Coatings
        8.1.4 Chemical resistance of internal surfaces
        8.1.5 Chemical resistance of external coatings
   8.2 Watertighness of system components
   8.3 Functional requirements
        8.3.1 Storage capacity for light liquid
        8.3.2 Automatic closure device
        8.3.3 Determination of the nominal size and class
   8.4 Reaction for fire
        8.4.1 Products deemed to satisfy the requirements for
              reaction to fire Class A1
        8.4.2 Products not deemed to satisfy reaction to fire
              Class A1
9 Type testing of factory made separator systems
   9.1 General
   9.2 Prototypes and documentation
10 Evaluation of conformity
   10.1 General
   10.2 Factory production control
Annex A (normative) Analysis of effluent samples
      A.1 General
      A.2 Infrared spectroscopy method
          A.2.1 Extraction and preparation of the extract
          A.2.2 Evaluation
      A.3 Gas chromatography method
          A.3.1 General
          A.3.2 Reagents
          A.3.3 Interferences
          A.3.4 Procedure
          A.3.5 Gas chromatographic analysis
          A.3.6 Example GC conditions
          A.3.7 Calibration
          A.3.8 Calculation of the oil concentration
Annex B (normative) Factory production control
Annex C (informative) Established methods of calculation and testing
      C.1 Germany
      C.2 The Netherlands
      C.3 France
      C.4 Austria
Annex D (informative) Control by third party (third party control)
      D.1 General
      D.2 Procedure of the third party control
          D.2.1 Factories certified to EN ISO 9001
          D.2.2 Factories not certified to EN ISO 9001
      D.3 Report by the third party
      D.4 Non-conforming products
Annex E (informative) Relevant extracts from EC Decision
        96/603/EC, as amended
Annex ZA (informative) Clauses of this European Standard addressing
         the provisions of EU Constructions Products Directive
Bibliography

Specifies definitions, nominal sizes, principles of design, performance requirements, marking, testing and quality control for separator systems for light liquids. Does not apply to the treatment of stable emulsions, solutions of light liquids and water, grease and oils of vegetable and animal origin.

Committee
B/505
DevelopmentNote
Supersedes 92/18137 DC (03/2002)
DocumentType
Standard
Pages
58
PublisherName
British Standards Institution
Status
Current
Supersedes

93/68/EEC : 1993 AMD 2 1998 COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
ISO 1514:2016 Paints and varnishes — Standard panels for testing
ISO 2812-2:2007 Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method
DIN 1045 : 1988 AMD 1 1996 STRUCTURAL USE OF CONCRETE - DESIGN AND CONSTRUCTION
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 9377-2:2000 Water quality Determination of hydrocarbon oil index Part 2: Method using solvent extraction and gas chromatography
EN 681-1:1996/A3:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
EN 288-1:1992/A1:1997 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING
EN 228:2012+A1:2017 Automotive fuels - Unleaded petrol - Requirements and test methods
EN 978:1997 Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta
EN 288-3:1992/A1:1997 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS
ATV-DVWK-A 127 : 2000 STANDARDS FOR THE STRUCTURAL CALCULATION OF DRAINS AND SEWERS
EN 976-1:1997 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks
ISO 2808:2007 Paints and varnishes Determination of film thickness
ISO 1083:2004 Spheroidal graphite cast irons - Classification
89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
EN 63 : 1977 GLASS REINFORCED PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES - THREE POINT METHOD
EN 10088-3:2014 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
ISO 1172:1996 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
EN 61 : 1977 GLASS REINFORCED PLASTICS - DETERMINATION OF TENSILE PROPERTIES
ISO 2736-2:1986 Concrete tests Test specimens Part 2: Making and curing of test specimens for strength tests
EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
ISO 8217:2017 Petroleum products Fuels (class F) Specifications of marine fuels
ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
EN ISO 1514:2016 Paints and varnishes - Standard panels for testing (ISO 1514:2016)
EN 288-2:1992/A1:1997 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING
ISO 4628-3:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting
ISO 1183:1987 Plastics Methods for determining the density and relative density of non-cellular plastics
ISO 6272:1993 Paints and varnishes — Falling-weight test
ISO 7253:1996 Paints and varnishes — Determination of resistance to neutral salt spray (fog)
EN 476:2011 General requirements for components used in drains and sewers
ISO 4624:2016 Paints and varnishes — Pull-off test for adhesion
ISO 180:2000 Plastics Determination of Izod impact strength
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ENV 10080 : 1995 STEEL FOR THE REINFORCEMENT OF CONCRETE WELDABLE RIBBED REINFORCING STEEL B500 - TECHNICAL DELIVERY CONDITIONS FOR BARS, COILS AND WELDED FABRIC
EN 62 : 1977 GLASS REINFORCED PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING & TESTING
DIN 4034-1:1993-09 PRECAST UNREINFORCED AND REINFORCED CONCRETE COMPONENTS FOR MANHOLES OVER BURIED DRAINS AND SEWERS; DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS
ISO 2736-1:1986 Concrete tests Test specimens Part 1: Sampling of fresh concrete
ISO 1518:1992 Paints and varnishes Scratch test
EN 124:1994 Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control
ISO 2815:2003 Paints and varnishes Buchholz indentation test
EN ISO 1172:1998 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)
ISO 9001:2015 Quality management systems — Requirements
ISO 2812-1:2017 Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water
ISO 877:1994 Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
ISO 4012:1978 Concrete — Determination of compressive strength of test specimens
ISO 185:2005 Grey cast irons Classification
DIN 1072:1985-12 ROAD AND FOOT BRIDGES - DESIGN LOADS
ISO 630:1995 Structural steels Plates, wide flats, bars, sections and profiles
DIN 1055-3:2006-03 ACTION ON STRUCTURES - PART 3: SELF-WEIGHT AND IMPOSED LOAD IN BUILDING
DIN 4281:1998-08 CONCRETE FOR PREFABRICATED SEWAGE UNITS - MANUFACTURE, REQUIREMENTS, TESTING AND QUALITY CONTROL
ISO 1920:1976 Concrete tests Dimensions, tolerances and applicability of test specimens
ISO 2409:2013 Paints and varnishes Cross-cut test
ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 178:2010 Plastics Determination of flexural properties
ISO 3755:1991 Cast carbon steels for general engineering purposes
ISO 1133:2005 Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
EN ISO 9377-2 : 2000 WATER QUALITY - DETERMINATION OF HYDROCARBON OIL INDEX - PART 2: METHOD USING SOLVENT EXTRACTION AND GAS CHROMATOGRAPHY (ISO 9377-2:2000)
ISO 4628-2:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering
EN 60 : 1977 GLASS REINFORCED PLASTICS - DETERMINATION OF THE LOSS ON IGNITION
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels

View more information
US$304.49
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.