BS EN ISO 15630-1:2010
Withdrawn
Withdrawn
View Superseded by
Steel for the reinforcement and prestressing of concrete. Test methods Reinforcing bars, wire rod and wire
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
11-30-2010
Publisher
Withdrawn date
03-23-2019
Superseded by
US$341.23
Excluding Tax where applicable
Foreword
Introduction
1 Scope
2 Normative references
3 Symbols
4 General provisions concerning test pieces
5 Tensile test
6 Bend test
7 Rebend test
8 Axial load fatigue test
9 Chemical analysis
10 Measurement of the geometrical characteristics
11 Determination of the relative rib or indentation area
(f[R] or f[P])
12 Determination of deviation from nominal mass per metre
13 Test report
Bibliography
Defines test methods applicable to reinforcing bars, wire rod and wire for concrete.
| Committee |
ISE/104
|
| DevelopmentNote |
Supersedes 99/714150 DC (06/2002) Supersedes 07/30162939 DC. (11/2010)
|
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN ISO 15630-1 : 2010 | Identical |
| NS EN ISO 15630-1 : 2010 | Identical |
| NF EN ISO 15630-1 : 2010 | Identical |
| ISO 15630-1:2010 | Identical |
| DIN EN ISO 15630-1:2011-02 | Identical |
| EN ISO 15630-1:2010 | Identical |
| NEN EN ISO 15630-1 : 2010 | Identical |
| I.S. EN ISO 15630-1:2010 | Identical |
| UNE-EN ISO 15630-1:2003 | Identical |
| 15/30320587 DC : DRAFT AUG 2015 | BS 6744 - STAINLESS STEEL BARS - REINFORCEMENT OF CONCRETE - REQUIREMENTS AND TEST METHODS |
| BS 8548:2017 | Guidance for arc welding of reinforcing steel |
| 14/30283495 DC : 0 | BS 8597 - STEELS FOR THE REINFORCEMENT OF CONCRETE - REINFORCEMENT COUPLERS - REQUIREMENTS AND TEST METHODS |
| BS 6744:2016 | Stainless steel bars. Reinforcement of concrete. Requirements and test methods |
| BS 4482:2005 | Steel wire for the reinforcement of concrete products. Specification |
| 04/30121774 DC : DRAFT SEP 2004 | BS 7123-1 - METAL ARC WELDING OF STEEL FOR CONCRETE REINFORCEMENT - PART 1: LOAD BEARING WELDED JOINTS |
| 04/30121786 DC : DRAFT SEP 2004 | BS 7123-2 - METAL ARC WELDING OF STEEL FOR CONCRETE REINFORCEMENT - PART 2: NON-LOAD BEARING WELDED JOINTS |
| BS 4483:2005 | Steel fabric for the reinforcement of concrete. Specification |
| BS 8597:2015 | Steels for the reinforcement of concrete. Reinforcement couplers. Requirements and test methods |
| 04/30109891 DC : DRAFT SEP 2004 | BS 4499 - STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - BAR, COIL AND DECOILED PRODUCT - SPECIFICATION |
| BS 4449:2005+A3:2016 | Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification |
| BS 4449(2005) : 2005 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - BAR, COIL AND DECOILED PRODUCT - SPECIFICATION |
| 16/30337162 DC : 0 | BS 8548 - GUIDANCE FOR ARC WELDING OF REINFORCING STEEL |
| ISO 4945:1977 | Steel — Determination of nitrogen content — Spectrophotometric method |
| ISO 10701:1994 | Steel and iron — Determination of sulfur content — Methylene blue spectrophotometric method |
| ISO 13898-2:1997 | Steel and iron — Determination of nickel, copper and cobalt contents — Inductively coupled plasma atomic emission spectrometric method — Part 2: Determination of nickel content |
| ISO 671:1982 | Steel and cast iron — Determination of sulphur content — Combustion titrimetric method |
| ISO 4947:1986 | Steel and cast iron — Determination of vanadium content — Potentiometric titration method |
| ISO 10697-1:1992 | Steel — Determination of calcium content by flame atomic absorption spectrometry — Part 1: Determination of acid-soluble calcium content |
| ISO 15353:2001 | Steel and iron — Determination of tin content — Flame atomic absorption spectrometric method (extraction as Sn-SCN) |
| ISO 4946:2016 | Steel and cast iron — Determination of copper — 2,2'-Biquinoline spectrophotometric method |
| ISO/TR 17055:2002 | Steel — Determination of silicon content — Inductively coupled plasma atomic emission spectrometric method |
| ISO 11652:1997 | Steel and iron — Determination of cobalt content — Flame atomic absorption spectrometric method |
| ISO 17053:2005 | Steel and iron — Determination of oxygen — Infrared method after fusion under inert gas |
| ISO 10702:1993 | Steel and iron — Determination of nitrogen content — Titrimetric method after distillation |
| ISO 13898-3:1997 | Steel and iron — Determination of nickel, copper and cobalt contents — Inductively coupled plasma atomic emission spectrometric method — Part 3: Determination of copper content |
| ISO 4829-1:1986 | Steel and cast iron — Determination of total silicon content — Reduced molybdosilicate spectrophotometric method — Part 1: Silicon contents between 0,05 and 1,0 % |
| ISO 4941:1994 | Steel and iron — Determination of molybdenum content — Thiocyanate spectrophotometric method |
| ISO 13900:1997 | Steel — Determination of boron content — Curcumin spectrophotometric method after distillation |
| ISO 10278:1995 | Steel — Determination of manganese content — Inductively coupled plasma atomic emission spectrometric method |
| ISO 6892-1:2016 | Metallic materials — Tensile testing — Part 1: Method of test at room temperature |
| ISO 4937:1986 | Steel and iron — Determination of chromium content — Potentiometric or visual titration method |
| ISO 13902:1997 | Steel and iron — Determination of high sulfur content — Infrared absorption method after combustion in an induction furnace |
| ISO 4943:1985 | Steel and cast iron — Determination of copper content — Flame atomic absorption spectrometric method |
| ISO 629:1982 | Steel and cast iron — Determination of manganese content — Spectrophotometric method |
| ISO 4939:2016 | Steel — Determination of nickel — Dimethylglyoxime spectrophotometric method |
| ISO 4935:1989 | Steel and iron — Determination of sulfur content — Infrared absorption method after combustion in an induction furnace |
| ISO 17058:2004 | Steel and iron — Determination of arsenic content — Spectrophotometric method |
| ISO/TR 15349-3:1998 | Unalloyed steel — Determination of low carbon content — Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating) |
| ISO 13898-4:1997 | Steel and iron — Determination of nickel, copper and cobalt contents — Inductively coupled plasma atomic emission spectrometric method — Part 4: Determination of cobalt content |
| ISO/TS 13899-3:2005 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 3: Determination of W content |
| ISO 10280:1991 | Steel and iron — Determination of titanium content — Diantipyrylmethane spectrometric method |
| ISO 4938:2016 | Steel and iron — Determination of nickel content — Gravimetric or titrimetric method |
| ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
| ISO/TR 10719:1994 | Steel and iron — Determination of non-combined carbon content — Infrared absorption method after combustion in an induction furnace |
| ISO 439:1994 | Steel and iron — Determination of total silicon content — Gravimetric method |
| ISO 7438:2016 | Metallic materials — Bend test |
| ISO 11653:1997 | Steel — Determination of high cobalt content — Potentiometric titration method after separation by ion exchange |
| ISO 4942:2016 | Steels and irons — Determination of vanadium content — N-BPHA spectrophotometric method |
| ISO/TR 4830-4:1978 | Steel — Determination of low carbon contents — Part 4: Coulometric method after combustion |
| ISO 437:1982 | Steel and cast iron — Determination of total carbon content — Combustion gravimetric method |
| ISO 9658:1990 | Steel — Determination of aluminium content — Flame atomic absorption spectrometric method |
| ISO/TS 13899-1:2004 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 1: Determination of Mo content |
| ISO 4940:1985 | Steel and cast iron — Determination of nickel content — Flame atomic absorption spectrometric method |
| ISO 10700:1994 | Steel and iron — Determination of manganese content — Flame atomic absorption spectrometric method |
| ISO 15351:1999 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
| ISO 10714:1992 | Steel and iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method |
| ISO 4829-2:2016 | Steels — Determination of total silicon contents — Reduced molybdosilicate spectrophotometric method — Part 2: Silicon contents between 0,01 % and 0,05 % |
| ISO 15349-2:1999 | Unalloyed steel — Determination of low carbon content — Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) |
| ISO 17054:2010 | Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique |
| ISO 9647:1989 | Steel and iron — Determination of vanadium content — Flame atomic absorption spectrometric method |
| ISO 13899-2:2005 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 2: Determination of Nb content |
| ISO 9441:1988 | Steel — Determination of niobium content — PAR spectrophotometric method |
| ISO 15350:2000 | Steel and iron — Determination of total carbon and sulfur content — Infrared absorption method after combustion in an induction furnace (routine method) |
| ISO 13898-1:1997 | Steel and iron — Determination of nickel, copper and cobalt contents — Inductively coupled plasma atomic emission spectrometric method — Part 1: General requirements and sample dissolution |
| ISO 9556:1989 | Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace |
| ISO 7500-1:2015 | Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system |
| ISO 4934:2003 | Steel and iron — Determination of sulfur content — Gravimetric method |
| ISO 16918-1:2009 | Steel and iron — Determination of nine elements by the inductively coupled plasma mass spectrometric method — Part 1: Determination of tin, antimony, cerium, lead and bismuth |
| ISO 10720:1997 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas |
| ISO 10153:1997 | Steel — Determination of boron content — Curcumin spectrophotometric method |
| ISO 10698:1994 | Steel — Determination of antimony content — Electrothermal atomic absorption spectrometric method |
| ISO 10138:1991 | Steel and iron — Determination of chromium content — Flame atomic absorption spectrometric method |
| ISO 10697-2:1994 | Steel — Determination of calcium content by flame atomic absorption spectrometry — Part 2: Determination of total calcium content |
| ISO/TR 15349-1:1998 | Unalloyed steel — Determination of low carbon content — Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation) |
| ISO 15355:1999 | Steel and iron — Determination of chromium content — Indirect titration method |
Summarise
US$341.23
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.