• There are no items in your cart

CFR 49(PTS186-199) : 0

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

TRANSPORTATION
Superseded date

10-01-2011

DevelopmentNote
Renumbered as CFR 49(PTS178-199). (03/2012)
DocumentType
Standard
PublisherName
Code of Federal Regulations
Status
Superseded
SupersededBy

ASTM D 4079 : 2000 : R2011 Standard Specification for Vapor-Degreasing Grade Methylene Chloride
ASTM D 4126 : 2002 Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane
API 2221 : 2011 CONTRACTOR AND OWNER SAFETY PROGRAM IMPLEMENTATION
MIL-P-71136 Base Document:1992 PROCESS SPECIFICATION, AMMUNITION, 25 MM PACKAGING, PACKING AND MARKING
NACE SP 02 06 : 2016 INTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY FOR PIPELINES CARRYING NORMALLY DRY NATURAL GAS (DG-ICDA)
MIL-A-82832 Base Document:1986 ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING
ASTM F 2207 : 2006 : R2013 Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
MIL-A-82845 Base Document:1987 ADHESIVE, PASTE, ONE-PART, NON-ASBESTOS
MIL-C-48115 Revision A:1976 CARTRIDGE, 40 MM, HEDP, M430: SPITBACK ASSEMBLY FOR METAL PARTS AND LOADING, ASSEMBLING AND PACKING
MIL-P-70533 Base Document:1990 PROJECTILE, 105 MM, HE, RA XM913/XM927 ROCKET PROPELLANT FOR
MIL W 83779 : B WATER INDICATING PASTE, METRIC
ASTM F 1948 : 2015 : REDLINE Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
MIL-A-3029 Revision A:1989 ASPHALT, WATERPROOFING (FOR USE IN MANUFACTURE OF FIBER AMMUNITION CONTAINERS)
ASTM D 4081 : 2016 : REDLINE Standard Specification for Drycleaning-Grade Perchloroethylene
ASTM D 4376 : 2015 : REDLINE Standard Specification for Vapor-Degreasing Grade Perchloroethylene
API 1117 : 2008 : INC : ERR 2 : 2009 : R2013 RECOMMENDED PRACTICE FOR MOVEMENT IN IN-SERVICE PIPELINES
MIL-PRF-6799 Revision L:2010 COATINGS, SPRAYABLE, STRIPPABLE, PROTECTIVE, WATER EMULSION
MIL-A-82690 Base Document:1980 ARMING-FIRING DEVICE, ROCKET MOTOR, MARK 28 MOD 0
CSA ISO 19904-1 : 2007 : R2012 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
MIL-A-82834 Base Document:1986 ADHESIVE, PASTE, ONE PART
MIL-A-82802 Base Document:1989 ADHESIVE AND SEALANT
ASTM F 1973 : 2013 : EDT 1 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
MIL-A-82950 Base Document:1995 ACTUATOR, BELLOWS ATU-117/P
A-A-59155 Base Document:2003 NITROGEN, HIGH PURITY, SPECIAL PURPOSE
ASTM F 905 : 2004 Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
ASTM F 2145 : 2013 : R2018 Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
MIL-A-82821 Base Document:1989 ALUMINUM, SPHERICAL (60-MICROMETERS)
ASTM D 4079 : 2000 : R2006 Standard Specification for Vapor-Degreasing Grade Methylene Chloride
CSA Z662.1 : 2013 COMMENTARY ON CSA Z662-07, OIL AND GAS PIPELINE SYSTEMS
API RP 14C : 2017 ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES
ASTM F 1802 : 2015 : REDLINE Standard Test Method for Performance Testing of Excess Flow Valves
NACE SP 01 06 : 2006 CONTROL OF INTERNAL CORROSION IN STEEL PIPELINES AND PIPING SYSTEMS
NACE 10B189 : 2014 DIRECT CURRENT OPERATED RAIL TRANSIT STRAY CURRENT MITIGATION
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM F 2349 : 2004 : R2010 Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems (Withdrawn 2017)
ASTM F 905 : 2004 : R2018 Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
ASTM D 5395 : 2003 Standard Specification for Reclaimed Methylene Chloride
ASTM D 7509 : 2009 Standard Specification for Fluorocarbon Feedstock Grade Chloroform
ASTM E 1229 : 2016 : REDLINE Standard Specification for Calcium Hypochlorite
ASTM F 1588 : 1996 : R2011 Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
ASTM F 1973 : 2013 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
ASCE 7 02 : 2003 MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES
API RP 1175 : 2015 PIPELINE LEAK DETECTION - PROGRAM MANAGEMENT
MIL-B-48387 Base Document:1975 BALL POWDER, IGNITER (BP1) (FOR USE IN CHARGES, PROPELLING FOR ARTILLERY SYSTEMS)
MIL-A-82667 Revision A:1978 AMMONIUM PERCHLORATE, GENERAL SPECIFICATION FOR
ASTM D 4080 : 2015 : REDLINE Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
API RP 1133 : 2017 MANAGING HYDROTECHNICAL HAZARDS FOR PIPELINES LOCATED ONSHORE OR WITHIN COASTAL ZONE AREAS
ASTM D 4079 : 2000 Standard Specification for Vapor-Degreasing Grade Methylene Chloride
ASTM F 1588 : 1996 : R2002 Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
MIL-A-46091 Revision B:1981 ADHESIVE, BRAKE LINING TO METAL
NFPA 513 : 1998 MOTOR FREIGHT TERMINALS
MIL-DTL-70759 Revision A:2004 Container, Ammunition: Hand-Held Pyrotechnic Signal Series, ScopePA142A1
API 67 RUSSIAN : 2007 RECOMMENDED PRACTICE FOR OILFIELD EXPLOSIVES SAFETY
API 1115:1994 RECOMMENDED PRACTICE ON THE OPERATION OF SOLUTION-MINED UNDERGROUND STORAGE FACILITIES
MIL-A-70827 Revision A:1994 ACTUATOR, PISTON, PA535 PARTS FOR AND LOADING, ASSEMBLING, AND PACKING
API 1117:2008 RECOMMENDED PRACTICE FOR MOVEMENT IN IN-SERVICE PIPELINES
MIL-A-82801 Base Document:1989 ALUMINUM, SPHERICAL (13-MICROMETERS)
CSA ISO 19904-1 : 2007 : R2017 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
API 1102 : 2007 : INC : ERR 4 : 2014 STEEL PIPELINES CROSSING RAILROADS AND HIGHWAYS
NACE SP 02 86 : 2007 ELECTRICAL ISOLATION OF CATHODICALLY PROTECTED PIPELINES
API RP 1175 & COMPANION GUIDE BUNDLE : 1ED 2017 RECOMMENDED PRACTICE FOR PIPELINE LEAK DETECTION - PROGRAM MANAGEMENT, AND COMPANION GUIDE BUNDLE
ISO 19904-1:2006 Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars
ASTM D 4079 : 2000 : R2016 Standard Specification for Vapor-Degreasing Grade Methylene Chloride
ASTM F 1924 : 2012 : REDLINE Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
ASTM F 2349 : 2004 Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems
API 500 RUSSIAN :1997 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
API 500 RUSSIAN : 1997 : R2002 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
ASTM D 4701 : 2000 : R2015 Standard Specification for Technical Grade Methylene Chloride
API 1115 : 1994 : R2007 RECOMMENDED PRACTICE ON THE OPERATION OF SOLUTION-MINED UNDERGROUND STORAGE FACILITIES
NFPA 56 : 2017 FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS
API RP 1130 : 2007(R2012) COMPUTATIONAL PIPELINE MONITORING FOR LIQUIDS
A-A-58020 Revision A:1994 DRUMS, SHIPPING, STEEL WITH POLYETHYLENE INSERT
MIL-A-82843 Base Document:1990 ADHESIVE, ELEVATED TEMPERATURE CURING
NACE RP 03 91 : 0 MATERIALS FOR THE HANDLING AND STORAGE OF CONCENTRATED (90 TO 100%) SULFURIC ACID AT AMBIENT TEMPERATURES
FM 5580 : 2012 HYBRID (WATER AND INERT GAS) FIRE EXTINGUISHING SYSTEMS
API RP 2201 : 2003 SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
MIL-A-82667-1 Base Document:1977 AMMONIUM PERCHLORATE, HIGH PURITY
API 15LE : 2008 : R2013 SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE)
ASTM F 905 : 2004 : R2011 Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
MIL-A-82836 Base Document:1987 ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING, NON-ASBESTOS
MIL-PRF-82736 Revision A:1988 IGNITION PELLETS, MAGNESIUM-FLUOROCARBON
MIL-L-16355 Revision E:1993 LEAD STYPHNATE, BASIC
API 1102 : 2007 : INC : ERR 3 : 2012 STEEL PIPELINES CROSSING RAILROADS AND HIGHWAYS
ASTM F 2619/F2619M : 2013 : REDLINE Standard Specification for High-Density Polyethylene (PE) Line Pipe
ANSI Z117.1 REDLINE : 2009 COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009)
CAN/CSA-Z662-15 Oil and gas pipeline systems
ASTM F 2145 : 2013 Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
ASTM D 5395 : 2003 : R2008 Standard Specification for Reclaimed Methylene Chloride <a href="#fn00002"></a>
ASTM D 7509 : 2009 : R2015 Standard Specification for Fluorocarbon Feedstock Grade Chloroform
ASTM D 4701 : 2000 : R2011 Standard Specification for Technical Grade Methylene Chloride
ASTM D 4126 : 2002 : R2007 Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane
ASTM F 1588 : 1996 Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
ASTM F 1733 : 2013 : REDLINE Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
API 2610 : 2005 : R2010 DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES
API 14F : 2008 : R2013 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
NASA KSC STD Z 0006 : 1995 DESIGN OF HYPERGOLIC PROPELLANTS GROUND SUPPORT EQUIPMENT, STANDARD FOR
NASA SSTD 8070 0126 : 2014 TUBING SYSTEMS FOR FACILITY SYSTEMS, SPECIAL TEST EQUIPMENT, AND AEROSPACE HARDWARE
NASA KSC SPEC P 0018 : 1995 PROPELLANTS, RECOVERED NITROGEN TETROXIDE SOLUTION, SPECIFICATION FOR
NASA KSC SPEC P 0017 : 1994 PROPELLANTS, RECOVERED HYDRAZINE FAMILY FUELS, SPECIFICATION FOR
ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 INTERNATIONAL FUEL GAS CODE
ICC 2012 INTERNATIONAL RESI. CODE : 2012 INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS
ASTM E 1281 : 2015 : REDLINE Standard Guide for Nuclear Facility Decommissioning Plans
API 6H : 1998 : R2011 SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS
ASTM F 2350 : 2004 : R2010 Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems (Withdrawn 2017)
NASA SSTD 8070 0092 : 2013 DESIGN, INSTALLATION AND MAINTENANCE OF SITEWIDE NATURAL GAS DISTRIBUTION SYSTEM
ASTM F 2509 : 2015-12 SPECIFICATION FOR FIELD-ASSEMBLED ANODELESS RISER KITS FOR USE ON OUTSIDE DIAMETER CONTROLLED POLYETHYLENE GAS DISTRIBUTION PIPE AND TUBING
MIL-A-52628 Revision B:1977 ANCHOR, PROPELLANT EMBEDDED
API 1130 : 2007 COMPUTATIONAL PIPELINE MONITORING FOR LIQUIDS
ASTM F 2207 : 2006 Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
MIL-P-87931 Base Document:1977 PROPELLANT, ISOPROPYL ALCOHOL
API 15LE : 2008(R2018) SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE)
FAA AC 109-1 : 0 AVIATION SECURITY - ACCEPTANCE AND HANDLING PROCEDURES - INDIRECT AIR CARRIER SECURITY
MIL-DTL-248 Revision D:2002 TRINITROTOLUENE (TNT)
ASTM D 4701 : 2000 : R2006 Standard Specification for Technical Grade Methylene Chloride
CSA ISO 19904-1 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
MIL-PRF-18487 Revision A:1972 COMPOUND, GUN SLUSHING
API RP 67 : 2007 RECOMMENDED PRACTICE FOR OILFIELD EXPLOSIVES SAFETY
API 67 : 2007 : R2015 RECOMMENDED PRACTICE FOR OILFIELD EXPLOSIVES SAFETY
MIL-PRF-32293 Base Document:2008 Cap, Blasting, Electric - M6
API 2220 : 2011 CONTRACTOR SAFETY PERFORMANCE PROCESS
ASTM D 4126 : 2002 : R2012 Standard Specification for Vapor-Degreasing Grade and General Solvent Grade<brk> 1,1,1-Trichloroethane (Withdrawn 2017)
API 15LE CHINESE : 2008 SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE)
API 1102 : 2007 : INC : ERR 5 : 2014 : R2015 STEEL PIPELINES CROSSING RAILROADS AND HIGHWAYS
API 1102 : 2007 STEEL PIPELINES CROSSING RAILROADS AND HIGHWAYS
API 505 : 1997 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2
ASTM E 1120 : 2016 : REDLINE Standard Specification for Liquid Chlorine
MSS SP 115 : 2017 EXCESS FLOW VALVES, NPS 1[1/4] AND SMALLER, FOR FUEL GAS SERVICE
ASTM D 8135 : 2017 Standard Guide for Selection of Substitute, Non-hazardous, Particulate Solid Filling Substances for Packagings Subjected to the United Nations Performance Tests
ASTM F 1588 : 1996 : R2015 Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
ASTM F 1973 : 2013 : R2018 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
API 14F:2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
API 2610:2005 DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES
BS EN ISO 19904-1:2006 Petroleum and natural gas industries. Floating offshore structures Monohulls, semi-submersibles and spars
EN ISO 19904-1:2006 Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006)
MIL-DTL-211 Revision F:2000 Phosphorus, Red, Technical
MIL-A-82785 Base Document:1986 ADHESIVE, TWO PART, HIGH STRENGTH
API 1169 : 2013 RECOMMENDED PRACTICE FOR BASIC INSPECTION REQUIREMENTS - NEW PIPELINE CONSTRUCTION
ASTM D 4701:2000 Standard Specification for Technical Grade Methylene Chloride
MIL-A-50460 Revision A:1973 AMMONIUM NITRATE, PRILLED (FOR USE IN AMMUNITION)
MIL C 82656 : 1977 CARBON BLACK
MIL-P-82887 Base Document:1993 PROPELLANT, M6+2 FOR THE 76 MM/62 CALIBER CARTRIDGE
API 1102 : 2007 : INC : ERR 5 : 2014 STEEL PIPELINES CROSSING RAILROADS AND HIGHWAYS
MIL-A-50926 Revision A:1975 ADHESIVE MR-23 (FOR USE IN AMMUNITION)
API 2220 CHINESE : 2011 CONTRACTOR SAFETY PERFORMANCE PROCESS
ANSI Z117.1 REDLINE : 2009 COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009)
MIL-DTL-70507 Revision A:2010 PROJECTILE, 155 MM, HE - M864E2 LOADING, ASSEMBLING AND PACKING
MIL-A-82842 Base Document:1983 ADHESIVE, CONDUCTIVE, LOW RESISTIVITY
BB-F-1421 Revision B:1982 FLUOROCARBON REFRIGERANTS
ASTM D 4919 : 2017 Standard Guide for Testing of Hazardous Materials (Dangerous Goods) Packagings
MIL-A-82830 Base Document:1990 AMMONIUM PERCHLORATE, CONDITIONED (WITH REDUCED ALKALI METAL CONTENT)
API 6H : 1998 SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS
ASTM D 5363 : 2016 : REDLINE Standard Specification for Anaerobic Single-Component Adhesives (AN)
NFPA 56 (PS) : 2012 FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS
ASTM D 6273 : 2014 : REDLINE Standard Test Methods for Natural Gas Odor Intensity
API 2201 : 2003 : R2010 SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
API 6H CHINESE : 1998 SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS
ASTM D 5395 : 2003 : R2013 Standard Specification for Reclaimed Methylene Chloride
FAA AC 121-27 : 0 GUIDE FOR AIR CARRIERS, FREIGHT FORWARDERS, AND SHIPPERS IN OBTAINING INFORMATION DEALING WITH THE TRANSPORTATION OF HAZARDOUS MATERIALS BY AIR
API 14F REDLINE : 2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
ASTM F 2350 : 2004 Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems
ASTM F 1588 : 1996 : R2007 Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
PIP STC01015 : 2017 STRUCTURAL DESIGN CRITERIA

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.