DD CLC/TS 50467:2008

Introduction
1 Scope
2 Normative references
3 Definitions
4 Technical information (electrical ratings)
5 Classification
   5.1 General
   5.2 Severity of service conditions in different rolling
        stock technologies
   5.3 Intended use of rolling stock
   5.4 Location of connector on board rolling stock
6 Requirements
   6.1 General
   6.2 Marking and identification
   6.3 Provision against incorrect mating (non-intermateable)
   6.4 Protection against electric shock
   6.5 Provisions for earthing
   6.6 Terminations and connection methods
   6.7 Resistance to ageing
   6.8 General design
   6.9 Design of a free connector
   6.10 Interlock
   6.11 Degree of protection IP
   6.12 Dielectric strength
   6.13 Mechanical and electrical durability
   6.14 Cable strain relief
   6.15 Mechanical strength
   6.16 Vibration and shock
   6.17 Insulation coordination
   6.18 Temperature classes
   6.19 Temperature rise
   6.20 Protection against corrosion
   6.21 Electromagnetic compatibility (EMC) requirements
   6.22 Fire behaviour of materials and components
   6.23 Resistance to chemically active substances and to
        contaminating fluids
   6.24 Resistance to ozone
   6.25 Resistance to UV
7 Tests
   7.1 General
   7.2 Test schedule
   7.3 Tests on raw materials
   7.4 Visual examination
   7.5 Durability of marking
   7.6 Interlock
   7.7 Protection against electric shock
   7.8 Temperature rise
   7.9 Mechanical operation
   7.10 Vibration and shock
   7.11 Measurement of clearances and creepage distances
   7.12 Dielectric strength
   7.13 Resistance between accessible metal parts and the
        protective earthing contact
   7.14 Corrosion test
   7.15 Ozone resistance (ISO 1431-1)
   7.16 Resistance to UV (EN ISO 4892-2)
   7.17 Resistance to fluids (EN 60512-19-3)
Annex A (informative) - Additional characteristics to be agreed by
                        the manufacturer and the user
Annex B (informative) - Severity of the service conditions in
                        different rolling stock locations
Bibliography

Defines additional terms, test methods and performance requirements for single-pole and multipole connectors with rated voltages up to 1000 V, rated currents up to 125 V per contact and frequencies below 3 MHz used for indoor and outdoor applications in railway rolling stock.