DIN 28450-1:1996-03
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
COUPLINGS FOR TANK TRUCKS, NOMINAL PRESSURE 10, NOMINAL SIZE 50, 80 AND 100 - PART 1: SURVEY, DESIGN, TESTING, MARKING
Hardcopy , PDF
05-01-2005
English
01-12-2013
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Übersicht
4 Konstruktive Grundlagen
5 Prüfung
6 Kennzeichnung
Anhang A (informativ) Literaturhinweise
Specifies requirements for quick-acting hose couplings (coupling assemblies, tank adapters, blanking caps and plugs) in sizes DN 50, DN 80 and DN 100, used for connecting hoses to tank trucks transporting fluids and solids (excluding liquefied gas and steam).
DocumentType |
Standard
|
Pages |
4
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
DIN 28450-5:1996-03 | COUPLINGS FOR TANK TRUCKS, NOMINAL PRESSURE 10, NOMINAL SIZE 50, 80 AND 100 - PART 5: MALE DUST COUPLING |
BWB TL 4320-0025 : 2ED 1997 | FUEL PUMPING SYSTEM, 400 L/MIN |
DIN 28450-2:1996-03 | COUPLINGS FOR TANK TRUCKS, NOMINAL PRESSURE 10, NOMINAL SIZE 50, 80 AND 100 - PART 2: MALE COUPLING |
DIN 28450-3:1996-03 | COUPLINGS FOR TANK TRUCKS, NOMINAL PRESSURE 10, NOMINAL SIZE 50, 80 AND 100 - PART 3: FEMALE COUPLING |
DIN 28450-4:1996-03 | COUPLINGS FOR TANK TRUCKS, NOMINAL PRESSURE 10, NOMINAL SIZE 50, 80 AND 100 - PART 4: FEMALE DUST COUPLING |
DIN 28453-2:1987-11 | CALIBERS FOR COUPLINGS FOR TANK TRUCKS, DN 50, DN 80 AND DN 100 FOR CURVED PIECE AND STOPPER - CALIBER B 1 |
ISO 4042:1999 | Fasteners Electroplated coatings |
DIN ISO 2859-1:2014-08 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION (ISO 2859-1:1999 + COR. 1:2001 + AMD.1:2011) |
DIN 7715-3:1983-11 | RUBBER PRODUCTS; DIMENSIONAL TOLERANCES; EXTRUDED RUBBER PRODUCTS |
DIN ISO 228-1:1994-12 | PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE NOT MADE ON THE THREADS - PART 1: DIMENSIONS, TOLERANCES AND DESIGNATION |
DIN 80402:1996-06 | LOCKING CHAINS - ASSEMBLY, COMPONENT PARTS |
DIN 7715-2:1977-02 | RUBBER PRODUCTS; DIMENSIONAL TOLERANCES, MOULDED RUBBER PRODUCTS |
DIN 28450-3:1996-03 | COUPLINGS FOR TANK TRUCKS, NOMINAL PRESSURE 10, NOMINAL SIZE 50, 80 AND 100 - PART 3: FEMALE COUPLING |
DIN 28450-5:1996-03 | COUPLINGS FOR TANK TRUCKS, NOMINAL PRESSURE 10, NOMINAL SIZE 50, 80 AND 100 - PART 5: MALE DUST COUPLING |
DIN 28454-2:1987-11 | CALIBERS FOR COUPLINGS FOR TANK TRUCKS, DN 50, DN 80 AND DN 100 FOR SEALING RING - CALIBER B 1 FOR DN 50 AND DN 80 |
VG 95967 : 2010 | OIL AND FUEL RESTISTANT GASKETS - TECHNICAL SPECIFICATION |
DIN 28454-1:1987-11 | CALIBERS FOR COUPLINGS FOR TANK TRUCKS, DN 50, DN 80 AND DN 100 FOR SEALING RING - CALIBER A 1 |
DIN 28450-2:1996-03 | COUPLINGS FOR TANK TRUCKS, NOMINAL PRESSURE 10, NOMINAL SIZE 50, 80 AND 100 - PART 2: MALE COUPLING |
DIN ISO 4042:1992-06 | THREADED COMPONENTS - ELECTROPLATED COATINGS |
DIN 28453-1:1987-11 | CALIBERS FOR COUPLINGS FOR TANK TRUCKS, DN 50, DN 80 AND DN 100 FOR CURVED PIECE AND STOPPER - CALIBER A 1 |
DIN 17611:2011-11 | Anodized products of aluminium and wrought aluminium alloys - Technical conditions of delivery |
DIN 28456:1987-11 | CALIBERS FOR COUPLINGS FOR TANK TRUCKS, DN 50, DN 80 AND DN 100 - CALIBER FOR BONNET |
DIN 1749-1:1976-12 | DROP FORGINGS OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS - STRENGTH PROPERTIES |
DIN 5686:1999-09 | Double loop chains without quality requirements |
DIN 2817-4:1995-05 | HOSE FITTINGS WITH CLAMP UNIT - PART 4: HOSE COUPLINGS WITH MALE PIPE THREAD |
ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
DIN 28450-6:1996-03 | COUPLINGS FOR TANK TRUCKS, NOMINAL PRESSURE 10, NOMINAL SIZE 50, 80 AND 100 - PART 6: ONE-PIECE HOSE COUPLING |
DIN 28455:1987-11 | CALIBERS FOR COUPLINGS FOR TANK TRUCKS, DN 50, DN 80 AND DN 100 - CALIBER FOR FORMER |
DIN 1757:1974-06 | WIRE OF COPPER AND WROUGHT COPPER ALLOYS, DRAWN - DIMENSIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.