• There are no items in your cart

DIN 65149:1980-12

Current
Current

The latest, up-to-date edition.

AEROSPACE; SCREWS OF STEEL FOR NON-STRUCTURAL COMPONENTS, M3 AND M4, TECHNICAL SPECIFICATION
Available format(s)

Hardcopy , PDF

Language(s)

German

Published date

01-01-1980

1 Anwendungsbereich
2 Mitgeltende Normen und Unterlagen
3 Begriffe
4 Anforderungen
  4.1 Werkstoff
  4.2 Gestaltung und Massen
      4.2.1 Masse
      4.2.2 Gewinde
      4.2.3 Form- und Lagetoleranzen
      4.2.4 Massen
  4.3 Fertigungsbedingte Eigenschaften
      4.3.1 Oberflächenrauheit
      4.3.2 Oberflächenbehandlung
  4.4 Mechanische Eigenschaften
      4.4.1 Zugbruchkraft
      4.4.2 Härte
  4.5 Metallurgische Eigenschaften
      4.5.1 Mikro-Gefüge
      4.5.2 Faserverlauf
      4.5.3 Permeabilität
  4.6 Kennzeichnung
      4.6.1 Kennzeichnung des Erzeugnisses
      4.6.2 Kennzeichnung der Verpackung
5 Prüfung
  5.1 Werkstoff
  5.2 Gestaltung und Massen
      5.2.1 Masse
      5.2.2 Gewinde
      5.2.3 Form- und Lagetoleranzen
      5.2.4 Massen
  5.3 Fertigungsbedingte Eigenschaften
      5.3.1 Oberflächenrauheit
      5.3.2 Oberflächenbehandlung
  5.4 Mechanische Eigenschaften
      5.4.1 Zugbruchkraft
      5.4.2 Härte
  5.5 Metallurgische Eigenschaften
      5.5.1 Mikro-Gefüge
      5.5.2 Faserverlauf
      5.5.3 Permeabilität
  5.6 Kennzeichnung
      5.6.1 Kennzeichnung des Erzeugnisses
      5.6.2 Kennzeichnung der Verpackung
6 Abnahmeprüfung
  6.1 Allgemeines
  6.2 Bescheinigung der Prüfergebnisse
  6.3 Statistische Qualitätskontrolle und
      abweichende Probenbeurteilung
  6.4 Fertigungskontrolle und Fertigungsbeobachtung
7 Verpackung
  7.1 Grundpackung
  7.2 Sammelpackung
  7.3 Versandpackung

Diese Norm gilt für Schrauben mit Gewinde M 3 und M 4, die für nichttragende Bauteile in der Luft- und Raumfahrt angewendet werden.

DocumentType
Standard
Pages
20
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

DIN 65523:1984-07 Aerospace; hexagon bolts, with MJ-thread, short thread, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 C
DIN 65520:1984-07 Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess an MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 C
DIN 65516:1984-07 AEROSPACE - CHEESE HEAD BOLTS WITH INTERNAL SERRATION THREAD, SHORT THREAD, STEEL, NOMINAL TENSILE STRENGTH 900 MPA, FOR TEMPERATURES UP TO 235 DEGREES C
DIN 65267:1992-09 AEROSPACE; SCREWS, HEXAGON, WITH MJ THREAD, THREADED APPROXIMATELY TO HEAD, STEEL, NOMINAL TENSILE STRENGTH 900 MPA, FOR TEMPERATURES UP TO 235 DEGREES CENTIGRADE
DIN 65522:1984-07 AEROSPACE - SCREWS, HEXAGON, WITH MJ-THREAD, THREADED APPROXIMATELY TO HEAD, CORROSION-RESISTING STEEL, NOMINAL TENSILE STRENGTH 700 MPA, FOR TEMPERATURES UP TO 425 DEGREES C
DIN 65519:1984-07 Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 C
DIN 65502:1984-07 AEROSPACE - PAN HEAD BOLTS WITH RIPPED TORQ-SET (ACR) RECESS AND MJ-THREAD, SHORT THREAD, CORROSION-RESISTING STEEL, NOMINAL TENSILE STRENGTH 700 MPA, FOR TEMPERATURES UP TO 425 DEGREES C

WL 1.1174 : 1978 UNALLOYED HEAT-TREATABLE STEEL WITH ABOUT 0.35C - RODS AND FORGINGS
DIN ISO 898-1:1989-01 MECHANICAL PROPERTIES OF FASTENERS - BOLTS, SCREWS AND STUDS
DIN 7160:1965-08 ISO-DEVIATIONS FOR SHAFTS FOR SIZES FROM 1 TO 500 MM
LN 65018-1:1968-09 Manufacturers certification for screws and bolts
DIN 50150:2000-10 TESTING OF METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES
MIL-I-17214 Revision B:1984 INDICATOR, PERMEABILITY, LOW-MU (GO-NO-GO)
DIN 55511-1:1984-12 MEANS OF PACKAGING; BOXES MANUFACTURED FROM SOLID FIBRE-BOARD OR CORRUGATED BOARD, ADJUSTED TO 600 MM X 400 MM (AREA MODULE); FOLDING BOXES WITH BOTTOM AND TOP FLAPS
WL 1.7220 : 1992 HEAT-TREATABLE CHROMIUM-MOLYBDENUM STEEL WITH ABOUT 0,35C-1CR-0,2MO; RODS AND WIRE FOR SCREWS AND NUTS TO BE COLD-FORMED OR HOT-FORMED
DIN 50950:1984-10 MEASUREMENT OF COATING THICKNESS; MICROSCOPIC MEASUREMENT OF COATING THICKNESS; CROSS SECTION METHOD
DIN 50133-1:1972-12 TESTING OF METALLIC MATERIALS; VICKERS HARDNESS TEST; RANGE HV 0,2 TO HV 100
DIN 50351:1985-02 TESTING OF METALLIC MATERIALS - BRINELL HARDNESS TEST
DIN 17440:2001-03 STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR DRAWN WIRE

View more information
US$43.14
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.