• There are no items in your cart

DIN EN ISO 11553-2:2009-03

Current

Current

The latest, up-to-date edition.

SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2009

Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Gefährdungen
  4.1 Inhärente Gefährdungen
  4.2 Gefährdungen durch externe Einflüsse
      (Störungen)
  4.3 Weitere Gefährdungen bei Anwendung
      von handgeführten Laserbearbeitungsgeräten
      4.3.1 Enge Räume
      4.3.2 Arbeiten auf hochgelegenen Arbeitsplätzen
      4.3.3 Umwelteinflüsse
5 Sicherheitsanforderungen und -massnahmen
  5.1 Allgemeine Anforderungen
  5.2 Risikobeurteilung
  5.3 Ausführung von korrigierenden Massnahmen
      5.3.1 Allgemeine Anforderungen
      5.3.2 Schutz vor Gefährdungen durch
             Laserstrahlung
  5.4 Konstruktionsanforderungen
      5.4.1 Gestaltung
      5.4.2 Schutzgehäuse
      5.4.3 Autorisierungskontrolleinrichtung
      5.4.4 Emissions-Warneinrichtung
      5.4.5 Justierlaser
      5.4.6 Sicherheitseinrichtungen bei
             richtungsveränderlicher Strahlung
      5.4.7 Not-Aus-Steuerung
      5.4.8 Kontrolleinrichtungen und Schaltungen
      5.4.9 Vorkehrungen für die Isolierung des
             Laserstrahls
      5.4.10 Schutz vor gas- und partikelförmigen
             Schadstoffen
6 Überprüfung der Sicherheitsanforderungen
  und -massnahmen
  6.1 Allgemeine Einhaltung
  6.2 Einteilung in Steuerungskategorien
  6.3 Einteilung in Laserklassen
7 Benutzerinformationen
  7.1 Zusätzliche Anforderungen
  7.2 Empfehlungen für zusätzliche Benutzerinformationen
8 Beschilderung
Anhang A (informativ) Beispiele für die Risikobeurteilung
Anhang B (informativ) Mögliche Bauformen von
          handgeführten Laserbearbeitungsgeräten
          B.1 Geräte mit handgeführtem Handhabungssystem,
              über eine Laserstrahlführung mit einem
              externen Lasergerät verbunden
          B.2 Handgeführte Laseranordnung, relativ zum
              ortsfesten Werkstück bewegt
          B.3 Ortsfeste Laseranordnung, Werkstück relativ
              zur Strahlformungseinheit
              (Bearbeitungskopf) handbewegt
Literaturhinweise
Anhang ZA (informativ) Zusammenhang zwischen
          dieser Europäischen Norm und den
          grundlegenden Anforderungen der EG-Richtlinie
          98/37/EG
Anhang ZB (informativ) Zusammenhang zwischen
          dieser Europäischen Norm und den
          grundlegenden Anforderungen der EG-Richtlinie
          2006/42/EG

This standard is included in DIN VDE Handbook 277 and DIN VDE Handbook 526.

DevelopmentNote
DRAFT 2017 issued in January 2017. (01/2017)
DocumentType
Standard
Pages
30
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

DIN EN ISO 11553-3:2013-07 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 3: NOISE REDUCTION AND NOISE MEASUREMENT METHODS FOR LASER PROCESSING MACHINES AND HAND-HELD PROCESSING DEVICES AND ASSOCIATED AUXILIARY EQUIPMENT (ACCURACY GRADE 2) (ISO 11553-3:2013)
DIN VDE HDBK 526 : 3ED 2014 OPTISCHE STRAHLUNGSSICHERHEIT UND LASER 2 - ANWENDUNGSSPEZIFISCHE NORMEN - HILFEN, ERLAEUTERUNGEN, CHECKLISTEN
DIN HDBK 277 : 3ED 2005

EN 14387:2004+A1:2008 Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking
EN 208 : 1998 PERSONAL EYE-PROTECTION - EYE-PROTECTORS FOR ADJUSTMENT WORK ON LASERS AND LASER SYSTEMS (LASER ADJUSTMENT EYE-PROTECTORS)
DIN EN ISO 11252:2014-02 LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MINIMUM REQUIREMENTS FOR DOCUMENTATION (ISO 11252:2013)
ISO 14119:2013 Safety of machinery — Interlocking devices associated with guards — Principles for design and selection
ISO 3821:2008 Gas welding equipment Rubber hoses for welding, cutting and allied processes
ISO 11252:2013 Lasers and laser-related equipment — Laser device — Minimum requirements for documentation
ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
ISO 3864-2:2016 Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
VDI 2242 Blatt 1:1986-04 Engineering design of products in accordance with ergonomics; fundamentals and procedures
DIN EN 1088:2008-10 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
DIN 4844-1:2012-06 GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: OBSERVATION DISTANCES AND COLORIMETRIC AND PHOTOMETRIC REQUIREMENTS
IEC 60825-4:2006+AMD1:2008+AMD2:2011 CSV Safety of laser products - Part 4: Laser guards
ISO 13852:1996 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 388 : 1994 PROTECTIVE GLOVES AGAINST MECHANICAL RISKS
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
ISO 13851:2002 Safety of machinery Two-hand control devices Functional aspects and design principles
DIN EN 60825 SUPP 14 : 2006 SAFETY OF LASER PRODUCTS - PART 14: A USER'S GUIDE
DIN EN 60204-1 : 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 352-2:2002 Hearing protectors - General requirements - Part 2: Ear-plugs
EN 207:2017 Personal eye-protection equipment - Filters and eye-protectors against laser radiation (laser eye-protectors)
DIN ISO 3864-3:2012-11 GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 3: DESIGN PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE IN SAFETY SIGNS (ISO 3864-3:2012)
DIN EN 1037:2008-11 SAFETY OF MACHINERY - PREVENTATION OF UNEXPECTED START-UP
IEC TR 60825-14:2004 Safety of laser products - Part 14: A user's guide
IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
EN 169:2002 Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use
DIN EN 60825-4 : 2011 SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS
ISO 14121:1999 Safety of machinery Principles of risk assessment
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
EN 171:2002 Personal eye-protection - Infrared filters - Transmittance requirements and recommended use
EN 352-1:2002 Hearing protectors - General requirements - Part 1: Ear-Muffs
DIN EN 60825-1 : 2015-07 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
EN 340:2003 Protective clothing - General requirements
DIN EN ISO 13849-1:2016-06 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN 170:2002 Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
ISO 7289:2010 Gas welding equipment Quick-action couplings with shut-off valves for welding, cutting and allied processes
ISO 3864-3:2012 Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
ISO 3253:1998 Gas welding equipment Hose connections for equipment for welding, cutting and allied processes
DIN EN ISO 13850:2016-05 SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015)
ISO 11145:2016 Optics and photonics Lasers and laser-related equipment Vocabulary and symbols
DIN EN ISO 11553-1:2009-03 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO 11553-1:2005 Safety of machinery Laser processing machines Part 1: General safety requirements

US$129.25
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.