• There are no items in your cart

EN 10002-2 : 1991

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

METALLIC MATERIALS - TENSILE TESTING - PART 2: VERIFICATION OF THE FORCE MEASURING SYSTEM OF THE TENSILE TESTING MACHINE
Superseded date

09-01-1999

Published date

01-12-2013

Foreword
1 SCOPE
2 NORMATIVE REFERENCES
3 SYMBOLS AND DEFINITIONS
4 GENERAL INSPECTION OF THE TESTING MACHINE
5 VERIFICATION OF THE FORCE-MEASURING SYSTEM
   OF THE TESTING MACHINE
   5.1 General
   5.2 Determination of the resolution
   5.3 Prior verification of the relative resolution
        of the force indicator
   5.4 Test procedure
   5.5 Assessment of the force indicator
6 CLASS OF THE TESTING MACHINE
7 VERIFICATION REPORT
8 INTERVALS BETWEEN VERIFICATIONS
ANNEX A GENERAL INSPECTION OF THE TESTING MACHINE

Describes the verification of force measuring of tensile testing machines. The dynamic verification of the forces applied by tensile testing machines is excluded. Not concerned with the verification of extensometers. Covers normative references, symbols and definitions, general inspection of the testing machine, determination of the resolution, prior verification of the relative resolution of the force indicator, test procedure, assessment of the force indicator, class of the testing machine, verification report and intervals between verifications.

Committee
ECISS/TC 1A
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

I.S. EN 1722:1999 LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE MAXIMUM TENSILE STRENGTH
07/30164869 DC : 0 BS ISO 20349 - PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR PROTECTING AGAINST MOLTEN METAL SPLASH - REQUIREMENTS AND TEST METHODS
I.S. EN 1724:1999 LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE COEFFICIENT OF FRICTION
07/30161512 DC : 0 BS EN 3987 - AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED HIGH CYCLE FATIGUE TESTING
02/711556 DC : 0 LINKS FOR USE WITH STEEL CHAINS OF GRADE 8
BS EN 61631:2001 Test method for the mechanical strength of cores made of magnetic oxides
DD ENV 12789:1998 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure. Determination of flexural strength
05/30089171 DC : DRAFT FEB 2005 ISO 283 - CONVEYOR BELTS - FULL THICKNESS TENSILE STRENGTH AND ELONGATION - SPECIFICATIONS AND METHOD OF TEST
05/30130970 DC : DRAFT MAR 2005 ISO 283 - CONVEYOR BELTS - FULL THICKNESS TENSILE STRENGTH AND ELONGATION - SPECIFICATIONS AND METHOD OF TEST
93/710118 DC : 0 PREN 3238 - AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS EXCEPT ALUMINIUM AND ALUMINIUM ALLOYS - SHEAR TEST FOR WIRES AND RIVETS
07/30171301 DC : 0 BS EN 3238 - AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS
DD ENV 1007-5:1998 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature
PREN 4524 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - MEASUREMENT OF FATIGUE CRACK GROWTH RATES
PREN 3874 : 200P1 AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED LOW CYCLE FATIGUE TESTING
PREN 3988 : 200P1 AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE STRAIN-CONTROLLED LOW CYCLE FATIGUE TESTING
PREN 2002-05 : 200P2 AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - PART 5: UNINTERRUPTED CREEP AND STRESS-RUPTURE TESTING
PREN 4522 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PIN-TYPE BEARING TEST OF YIELD STRENGTH
I.S. EN 16602-70-37:2014 SPACE PRODUCT ASSURANCE - DETERMINATION OF THE SUSCEPTIBILITY OF METALS TO STRESS-CORROSION CRACKING
I.S. ENV 820-1:1994 ADVANCED TECHNICAL CERAMICS MONOLITHIC CERAMICS THERMOMECHANICAL PROPERTIES - PART 1: DETERMINATION OF FLEXURAL STRENGTH AT ELEVATED TEMPERATURES
DIN EN 12195-2:2001-02 LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 2: WEB LASHING MADE FROM MAN-MADE FIBRES
BS EN 13414-2 : 2003 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
BS EN 14208:2004 Transportable gas cylinders. Specification for welded pressure drums up to 1000 litre capacity for the transport of gases. Design and construction
BS EN 12785:2000 Footwear. Test methods for whole shoe. Heel attachment
BS EN 12195-2:2001 Load restraint assemblies on road vehicles. Safety Web lashing made from man-made fibres
BS EN 10002-3:1995 Tensile testing of metallic materials Calibration of force proving instruments used for the verification of uniaxial testing machines
BS EN 1738:1998 Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete
BS EN 12310-1:2000 Flexible sheets for waterproofing. Determination of resistance to tearing (nail shank) Bitumen sheets for roof waterproofing
I.S. EN 13414-2:2003 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
EN 12773 : 1999 FOOTWEAR - TEST METHODS FOR OUTSOLES - NEEDLE TEAR STRENGTH
DIN EN 818-1:2008-12 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE
DIN EN 13414-2:2009-02 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
EN 12785 : 2000 FOOTWEAR - TEST METHODS FOR WHOLE SHOE - HEEL ATTACHMENT
EN 12782 : 1999 FOOTWEAR - TEST METHODS FOR INSOLES - RESISTANCE TO STITCH TEAR
EN 12310-1:1999 Flexible sheets for waterproofing - Part 1: Bitumen sheets for waterproofing - Determination of resistance to tearing (nail shank)
EN 10002-3 : 1994 METALLIC MATERIALS - TENSILE TEST - CALIBRATION OF FORCE PROVING INSTRUMENTS USED FOR THE VERIFICATION OF UNIAXIAL TESTING MACHINES
NF EN 61631 : 2005 TEST METHOD FOR THE MECHANICAL STRENGTH OF CORES MADE OF MAGNETIC OXIDES
EN 12316-1:1999 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints
EN 10271:1998 Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions
EN 12195-2:2000 Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres
EN 12311-1:1999 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties
EN 10002-5:1991 Metallic materials - Tensile testing - Part 5: Method of testing at elevated temperature
EN 12803:2000/AC:2002 FOOTWEAR - TEST METHODS FOR OUTSOLES - TENSILE STRENGTH AND ELONGATION
EN 12422:1999 Sisal twines
EN 12317-1:1999 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of shear resistance of joints
I.S. EN 1492-1:2000 TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
I.S. EN 1723:2000 LIGHT CONVEYOR BELTS - METHOD OF TEST FOR THE DETERMINATION OF THE RELAXED ELASTIC MODULUS
96/705057 DC : 0 PREN 3874 - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED LOW CYCLE FATIGUE TESTING
04/30116684 DC : DRAFT JUL 2004 EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LPG METALLIC PRESSURE DRUMS WITH A CAPACITY BETWEEN (150 AND 1 000 LITRES)
DIN 57147-1 : 1983 INSTALLATION OF STATIONARY ELECTROSTATIC SPRAYING EQUIPMENT; GENERAL REQUIREMENTS [VDE SPECIFICATION]
BS EN 16602-70-45:2014 Space product assurance. Mechanical testing of metallic materials
BS EN 16602-70-37:2014 Space product assurance. Determination of the susceptibility of metals to stress-corrosion cracking
03/103004 DC : DRAFT JAN 2003 ISO 20863 - FOOTWEAR - TEST METHODS FOR STIFFENERS AND TOEPUFFS - BONDABILITY
DD ENV 13234:2000 Advanced technical ceramics. Ceramic composites. Mechanical properties at ambient temperatures. Evaluation of the resistance to crack propagation by notch sensitivity testing
04/30106630 DC : DRAFT APR 2004 BS ISO 21182 - LIGHT CONVEYOR BELTS - TEST METHODS FOR THE DETERMINATION OF THE COEFFICIENT OF FRICTION
ISO 3077:2001 Short-link chain for lifting purposes — Grade T, (types T, DAT and DT), fine-tolerance hoist chain
GOST R EN 818-1 : 2005 SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL REQUIREMENTS FOR ACCEPTANCE
PREN 4523 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - COMPRESSION TESTING
ISO 22654:2002 Footwear — Test methods for outsoles — Tensile strength and elongation
PREN 4525 : 200P1 AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOYS - TEST METHODS - SHEAR TESTING
BIS IS/ISO 13935-1 : 1999 TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD
ISO 13935-1:2014 Textiles Seam tensile properties of fabrics and made-up textile articles Part 1: Determination of maximum force to seam rupture using the strip method
DIN EN 1677-4:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
DIN EN 1677-1:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
DIN EN 1677-5:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
DIN EN 1492-2:2009-05 TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
BS EN 12773:2000 Footwear. Test methods for outsoles. Needle tear strength
BS EN 12422:1999 Sisal twines
BS EN 1492-2 : 2000 TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES, FOR GENERAL PURPOSE USE
DIN EN 10002-5:1992-02 TENSILE TESTING OF METALLIC MATERIALS - PART 5: METHOD OF TESTING AT ELEVATED TEMPERATURE
I.S. EN 1677-5:2001 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
I.S. EN 1492-2:2000 TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
I.S. EN ISO 13935-1:2014 TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD (ISO 13935-1:2014)
I.S. EN 1677-6:2001 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
I.S. EN 1677-4:2001 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
I.S. EN 818-6:2000 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
I.S. EN 818-1:1996 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE
I.S. EN 1677-1:2000 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
UNI EN 1677-6 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
VDE 0147-1 : 1983 INSTALLATION OF STATIONARY ELECTROSTATIC SPRAYING EQUIPMENT - GENERAL REQUIREMENTS
97/541504 DC : DRAFT MAY 97 EN 12841 - PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTION OF FALLS FROM A HEIGHT - WORK POSITIONING SYSTEMS - ROPE ADJUSTMENT DEVICES
04/30106626 DC : DRAFT APR 2004 BS ISO 21181 - LIGHT CONVEYOR BELTS - METHOD OF TEST FOR THE DETERMINATION OF THE RELAXED ELASTIC MODULUS
97/109272 DC : DRAFT DEC 1997 PREN 13063 - CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS OR BLOCKS
04/30123559 DC : DRAFT OCT 2004 EN 1392 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIC CONDITIONS
NFL 17 919 : 98 XP AEROSPACE SERIES - TEST ON BRAIDED ARTICLES - DETERMINATION OF THE BREAKING LOAD UNDER TRACTION AT 2/3 EXTENSION
DIN EN 2002-2:1996-08 (Draft) AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - PART 2: TENSILE TESTING AT ELEVATED TEMPERATURE
BS 7648:1993 Specification for double braided ropes made from man-made fibre
05/30124589 DC : 0 EN 1094-7 - INSULATING REFRACTORY PRODUCTS - PART 7: METHODS OF TEST FOR CERAMIC FIBRE PRODUCTS
ISO 21690:2006 Glass in building Glass blocks Specification and test methods
DIN EN 1492-1:2009-05 TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
DIN EN 1677-6:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
BS EN 820-1:2002 Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties Determination of flexural strength at elevated temperatures
BS EN 818-1 : 1996 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE
BS EN 1722:1999 Light conveyor belts. Test method for the determination of the maximum tensile strength
EN 61631:2001 Test method for the mechanical strength of cores made of magnetic oxides
ENV 13234 : 1998 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - MECHANICAL PROPERTIES AT AMBIENT TEMPERATURES - EVALUATION OF THE RESISTANCE TO CRACK PROPAGATION BY THE NOTCH SENSITIVITY TESTING
EN 16602-70-37:2014 Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking
UNI EN 818-1 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE
UNI EN 1677-1 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
UNI EN 1492-2 : 2009 TEXTILE SLINGS - SAFETY - PART 2: ROUND SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USES
BS 3546-2:1993 Coated fabrics for use in the manufacture of water penetration resistant clothing Specification for non-water vapour permeable coated fabrics
UNI EN 13414-2 : 2009 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
UNI EN 1677-4 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
UNI EN 818-6 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
UNI EN ISO 13935-1 : 2014 TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD
UNI EN 12317-1 : 2001 FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN SHEETS FOR ROOF WATERPROOFING - DETERMINATION OF SHEAR RESISTANCE OF JOINTS
UNI EN 1492-1 : 2009 TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USES
IEC 61631:2001 Test method for the mechanical strength of cores made of magnetic oxides
UNI EN 1677-5 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
04/30106622 DC : DRAFT APR 2004 BS ISO 21180 - LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE MAXIMUM TENSILE STRENGTH
I.S. EN 10002-3:1994 METALLIC MATERIALS - TENSILE TEST - PART 3: CALIBRATION OF FORCE PROVING INSTRUMENTS USED FOR THE VERIFICATION OF UNIAXIAL TESTING MACHINES
BS EN 3987:2009 Aerospace series. Test methods for metallic materials. Constant amplitude force-controlled high cycle fatigue testing
14/30298872 DC : 0 BS EN ISO 283 - TEXTILE CONVEYOR BELTS - FULL THICKNESS TENSILE STRENGTH, ELONGATION AT BREAK AND ELONGATION AT THE REFERENCE LOAD - TEST METHOD
01/121060 DC : DRAFT MAR 2001 PREN 13121-3 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
DD ENV 13235:2000 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of creep behaviour
BIS IS/ISO 13935-2 : 1999 TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD
DD ENV 820-4:2002 Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties Determination of flexural creep deformation at elevated temperatures
DIN EN 2002-1:1996-08 (Draft) AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - PART 1: TENSILE TESTING AT AMBIENT TEMPERATURE
PREN 3987 : 200P1 AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED HIGH CYCLE FATIGUE TESTING
PREN 2002-23 : 200P1 AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - PART 23 - SHARP-NOTCH TENSION TESTING
I.S. EN 3987:2009 AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED HIGH CYCLE FATIGUE TEST
DIN EN 14208:2004-05 Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
DIN EN ISO 13935-1:2014-07 TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD (ISO 13935-1:2014)
DIN EN 818-6:2008-12 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
BS EN 12423:1999 Polypropylene twines
BS EN 1724:1999 Light conveyor belts. Test method for the determination of the coefficient of friction
BS EN 658-1:1998 Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature Determination of tensile strength
BS EN 10271:1999 Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions
BS EN 1677-1 : 2000 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
ISO 283-1:2000 Textile conveyor belts Full thickness tensile testing Part 1: Determination of tensile strength, elongation at break and elongation at the reference load
BS EN ISO 13935-1:2014 Textiles. Seam tensile properties of fabrics and made-up textile articles Determination of maximum force to seam rupture using the strip method
BS EN 1677-5 : 2001 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
BS EN 1723:2000 Light conveyor belts. Method of test for the determination of the relaxed elastic modulus
BS EN 12774:2000 Footwear. Test methods for outsoles. Determination of split tear strength and delamination resistance
BS EN 12316-1:2000 Flexible sheets for waterproofing. Determination of peel resistance of joints Bitumen sheets for roof waterproofing
BS EN 1677-4 : 2000 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
UNE-EN ISO 13935-1:2014 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO 13935-1:2014)
BS EN 12317-1:2000 Flexible sheets for waterproofing Bitumen sheets for roof waterproofing. Determination of shear resistance of joints
BS EN 364:1993 Personal protective equipment against falls from a height. Test methods
EN ISO 13935-1:2014 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO 13935-1:2014)
ENV 12788 : 1998 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF FLEXURAL STRENGTH
EN 1724 : 1998 COR 1999 LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE COEFFICIENT OF FRICTION
ENV 12789 : 1998 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER AIR AT ATMOSPHERE PRESSURE - DETERMINATION OF FLEXURAL STRENGTH
EN 1677-5:2001+A1:2008 Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4
EN ISO 283-1 : 2000 TEXTILE CONVEYOR BELTS - FULL THICKNESS TENSILE TESTING - PART 1: DETERMINATION OF TENSILE STRENGTH, ELONGATION AT BREAK AND ELONGATION AT THE REFERENCE LOAD
EN 818-6:2000+A1:2008 Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer
EN 658-1:1998 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties
EN 1677-6:2001+A1:2008 Components for slings - Safety - Part 6: Links - Grade 4
EN 1722 : 1999 LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE MAXIMUM TENSILE STRENGTH
EN 364:1992/AC:1993 PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - TEST METHODS
EN 1738:1998 Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete
EN 600 : 1996 NATURAL RUBBER LATEX MALE CONDOMS
EN 1492-2:2000+A1:2008 Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use
EN 863:1995 Protective clothing - Mechanical properties - Test method: Puncture resistance
EN 3987:2009 Aerospace series - Test methods for metallic materials - Constant amplitude force-controlled high cycle fatigue testing
ENV 1007-5 : 1998 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - DETERMINATION OF DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT AMBIENT TEMPERATURE
EN 1415:1996 Touch and close fasteners - Behaviour of slit selvedges
EN 818-1:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance
EN 1677-4:2000+A1:2008 Components for slings - Safety - Part 4: Links, Grade 8
EN 1492-1:2000+A1:2008 Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use
EN 1723 : 1999 LIGHT CONVEYOR BELTS - METHOD OF TEST FOR THE DETERMINATION OF THE RELAXED ELASTIC MODULUS
EN 820-1:2002 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermonechanical properties - Part 1: Determination of flexural strength at elevated temperatures
EN 1677-1:2000+A1:2008 Components for slings - Safety - Part 1: Forged steel components, Grade 8
ENV 13235 : 1998 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF CREEP BEHAVIOUR
EN 14208:2004 Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
EN 16602-70-45:2014 Space product assurance - Mechanical testing of metallic materials
05/30124598 DC : 0 EN 1094-9 - INSULATING REFRACTORY PRODUCTS - PART 9: METHODS OF TEST FOR ALKALINE EARTH SILICATE (AES) WOOL PRODUCTS
08/30185906 DC : 0 BS EN 820-4 - ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES
I.S. EN 820-1:2002 ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 1: DETERMINATION OF FLEXURAL STRENGTH AT ELEVATED TEMPERATURES
I.S. EN 10002-5:1992 METALLIC MATERIALS - TENSILE TESTING - PART 5: METHOD OF TESTING AT ELEVATED TEMPERATURE
DD ENV 12788:1998 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of flexural strength
95/715478 DC : 0 PREN 3988 - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE STRAIN-CONTROLLED LOW CYCLE FATIGUE TESTING
04/30046221 DC : 0 PREN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
00/102526 DC : DRAFT MAR 2000 BS EN 13863-3 - CONCRETE PAVEMENTS - TEST METHODS - PART 3: DETERMINATION OF BOND BETWEEN TWO CONCRETE LAYERS
I.S. EN 16602-70-45:2014 SPACE PRODUCT ASSURANCE - MECHANICAL TESTING OF METALLIC MATERIALS
I.S. ENV 1007-6:2002 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 6: DETERMINATION OF TENSILE PROPERTIES OF FILAMENT AT HIGH TEMPERATURE
NF EN 3987 : 2010 AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED HIGH CYCLE FATIGUE TESTING
DIN EN 13414-2 E : 2009 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
BS EN 1492-1 : 2000 TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
BS EN ISO 283-1:2000 Textile conveyor belts. Full thickness tensile testing Determination of tensile strength, elongation at break and elongation at the reference load
BS EN 582:1994 Thermal spraying. Determination of tensile adhesive strength
BS EN 818-6 : 2000 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
BS EN 12771:2000 Footwear. Test methods for outsoles. Tear strength
BS EN 12803:2000 Footwear. Test methods for outsoles. Tensile strength and elongation
BS EN 12311-1:2000 Flexible sheets for waterproofing. Determination of tensile properties Bitumen sheets for roof waterproofing
BS EN 1677-6 : 2001 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
BS EN 12782:2000 Footwear. Test methods for insoles. Resistance to stitch tear
EN 12774 : 1999 FOOTWEAR - TEST METHODS FOR OUTSOLES - DETERMINATION OF SPLIT TEAR STRENGTH AND DELAMINATION RESISTANCE
EN 12423:1999 Polypropylene twines
EN 12771 : 1999 FOOTWEAR - TEST METHODS FOR OUTSOLES - TEAR STRENGTH
EN 13414-2:2003+A2:2008 Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer
DIN EN ISO 13935-1:1999-04 TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD (ISO 13935-1:2014)
DIN EN 820-1:2003-01 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 1: DETERMINATION OF FLEXURAL STRENGTH AT ELEVATED TEMPERATURES

EN 10002-4 : 1994 METALLIC MATERIALS - TENSILE TEST - VERIFICATION OF EXTENSOMETERS USED IN UNIAXIAL TESTING
EN 10002-3 : 1994 METALLIC MATERIALS - TENSILE TEST - CALIBRATION OF FORCE PROVING INSTRUMENTS USED FOR THE VERIFICATION OF UNIAXIAL TESTING MACHINES

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.