• There are no items in your cart

EN 10045-1 : 1990

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD

Superseded date

10-01-2010

Published date

01-12-2013

Foreword
1 Object and field of application
2 References
3 Principle
4 Designations
5 Test pieces
6 Testing machine
7 Test requirements
8 Test report
Annex A List of national standards corresponding to the
        reference European Standard in preparation

Explains the Charpy impact test for metallic materials. For certain particular metallic materials and applications, the Charpy impact test may be the subject of specific standards and particular requirements. Covers references, principle, designations, test pieces, testing machine, test requirements and test report.

Committee
ECISS/TC 1A
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
SNV DIN EN 10045-1 : 1991 Identical
NF EN 10045-1 : 1990 Identical
NBN EN 10083-1 : 2007 Corresponds
BS EN 10045-1:1990 Identical
UNE 7475-1:1992 Similar to
ISO 83:1976 Similar to
PN EN 10045-1 : 1994 Identical
UNI EN 10045-1 : 1992 Identical
NBN EN 288-9 : 1999 Identical
ISO 148:1983 Similar to
NEN EN 10045-1 : 1990 Identical
I.S. EN 10045-1:1991 Identical
NS EN 10045-1 : 1ED 1990 Identical
NBN EN 10045-1 : 1992 Identical
DIN EN 10045-1:1991-04 Identical

UNI EN 13155 : 2009 CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS
NFA 36 218 : 1988 IRON AND STEEL - PLATE FOR BOILERS AND PRESSURE VESSELS - STAINLESS STEEL PLATE WITH SPECIAL CORROSION RESISTANCE PROPERTIES
99/709740 DC : DRAFT JUN 99 PREN 10253-2 - BUTT WELDING PIPE FITTINGS - PART 2: WROUGHT CARBON AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
UNE-EN 10088-5:2010 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
UNE-EN 10343:2010 Steels for quenching and tempering for construction purposes - Technical delivery conditions
BS EN 4700-001:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip
BS EN 10253-2:2007 Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements
08/30184309 DC : DRAFT SEP 2008 BS EN 12952-5 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
PREN 10217-6 : DRAFT 2009 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
11/30235004 DC : 0 BS EN 13155 - CRANES - NON-FIXED LOAD LIFTING ATTACHMENTS
03/302503 DC : DRAFT FEB 2003 BS EN 14276-2 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
I.S. EN 12079-1:2006 OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING
09/30200834 DC : 0 BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
09/30207517 DC : 0 BS EN 10217-6 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
I.S. EN 1252-2:2001 CRYOGENIC VESSELS - MATERIALS - PART 2: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BETWEEN -80 DEGREE C AND -20 DEGREE C
I.S. EN 10213-1:1996 TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL
03/105150 DC : DRAFT MAR 2003 PREN 14620-3 - DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN -5 DEGREES C AND -165 DEGREES C - PART 3: CONCRETE COMPONENTS
99/707159 DC : DRAFT APR 99 BS PREN 13480-2 - METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
13/30290101 DC : 0 BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
PREN 1564 : DRAFT 2009 FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRON
PREN 14141 : DRAFT 2011 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
09/30207505 DC : 0 BS EN 10217-2 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
UNI EN 4700-006 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
05/30129551 DC : 0 PREN 4700-5 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK
UNE-EN 1993-1-10:2013 Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
08/30190326 DC : DRAFT DEC 2008 BS EN 10225 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
I.S. CEN TS 13001-3-1:2005 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
EN 10085:2001 Nitriding steels - Technical delivery conditions
DIN EN 14638-3:2012-06 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods (includes Corrigendum AC:2012)
12/30258463 DC : 0 BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
09/30207508 DC : 0 BS EN 10217-3 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
09/30200840 DC : 0 BS EN 1564 - FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRON
16/30322067 DC : 0 BS EN 13001-3-1:2012 AMD 2 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
BS EN 10343:2009 Steels for quenching and tempering for construction purposes. Technical delivery conditions
I.S. EN 1515-4:2009 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
I.S. EN 10083-1:2006 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNI EN 10340 : 2008 STEEL CASTINGS FOR STRUCTURAL USES
BS EN 10083-3 : 2006-08 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
PREN 10208-3 : DRAFT 1997 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C
PREN 4700-005 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
I.S. EN 10217-3:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
PREN 4700-006 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
NFA 32 060 : 2001 FOUNDRY PRODUCTS - CAST STEEL AND NICKEL ALLOY CASTINGS FOR PUMPS, VALVES AND FITTINGS (ENCLOSURES AND INTERNAL COMPONENTS)
I.S. EN 14638-3:2010 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
EN 13411-7:2006+A1:2008 Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket
BS EN 14399-7:2007 High-strength structural bolting assemblies for preloading System HR. Countersunk head bolt and nut assemblies
S.R. CEN TS 13001-3-5:2010 CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE OF FORGED HOOKS
BS EN 14917 : 2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
I.S. EN 13322-1:2003 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
BS EN 13001-3-1 : 2012 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
EN 14399-8:2007 High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
EN 14917:2009+A1:2012 Metal bellows expansion joints for pressure applications
UNI EN 13001-3-1 : 2013 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
BS EN 10217-5:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
UNI EN 1090-1 : 2012 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
I.S. EN 10088-5:2009 STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
UNI EN 14399-7 : 2008 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
I.S. EN 1993-1-10:2005 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 14382:2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 13709:2010-10 Industrial valves - Steel globe and globe stop and check valves
DIN EN 13261:2011-01 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
DIN EN 13262:2011-06 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
DIN EN 14532-1:2005-02 WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS
DIN EN 12927-4:2005-06 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS
BS EN 12079:1999 Offshore containers. Design, construction, testing, inspection and marking
BS EN 14200:2004 Railway applications. Suspension components. Parabolic springs, steel
BS EN 10250-1:1999 Open steel die forgings for general engineering purposes General requirements
BS EN 10113-1:1993 Hot-rolled products in weldable fine grain structural steels General delivery conditions
BS EN 14382 : 2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 14015:2004 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
BS EN 13261 : 2009 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
BS EN 10340:2007 Steel castings for structural uses
BS EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
BS EN 1252-1:1998 Cryogenic vessels. Materials Toughness requirements for temperatures below -80°C
BS EN 1993-5:2007 Eurocode 3. Design of steel structures Piling
EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 1252-2:2001 Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 °C and -20 °C
EN 10254:1999 Steel closed die forgings - General technical delivery conditions
CEN/TS 15718:2011 Railway applications - Wheelsets and bogies - Product requirements for cast wheels
EN 1160 : 1996 INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - GENERAL CHARACTERISTICS OF LIQUEFIED NATURAL GAS
EN 12079 : 1999 OFFSHORE CONTAINERS - DESIGN, CONSTRUCTION, TESTING, INSPECTION AND MARKING
EN 10296-1:2003 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10088-4:2009 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
EN 10025:1990/A1:1993 HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 12927-4 : 2004 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10294-1:2005 Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels
UNI EN 13411-7 : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
EN 10162:2003 Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
EN 13411-6:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
I.S. EN 12284:2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
EN 10213-1 : 1995 TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL
EN 10045-2 : 1992 COR 1993 METALLIC MATERIALS - CHARPY IMPACT TEST - VERIFICATION OF THE TESTING MACHINE (PENDULUM IMPACT)
EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
DIN EN 14399-8:2008-03 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
DIN EN 13889:2009-02 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES, GRADE 6 - SAFETY
DEFSTAN 81-4/3(1992) : 1992 CORR 1 1997 VALVES, CONTAINER, GAS
PREN 14015-1 : DRAFT 2000 SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, METALLIC TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE - PART 1: STEEL TANKS
DIN EN 10088-4:2010-01 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
NFL 63 010 : 1997 AMD 1 1999 AEROSPACE INDUSTRY - AIRBORNE, STATIONARY, PERMANENT PRESSURE, FIXED METALLIC EXTINGUISHERS - TECHNICAL SPECIFICATION AND QUALIFICATION CONDITIONS
DIN EN 14917:2012-06 Metal bellows expansion joints for pressure applications (includes Amendment A1:2012)
BS EN 4700-006:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings
I.S. EN 10208-2:2009 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
DIN EN 10253-2:2008-09 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
I.S. EN 1964-1:1999 TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0.5 LITRE UP TO AND INCLUDING 50 LITRES - PART 1: CYLINDERS MADE OF SEAMLESS STEEL WITH AN RM VALUE OF LESS THAN 1100 MPA
I.S. EN 1252-1:1998 CRYOGENIC VESSELS - MATERIALS - PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BELOW -80 DEGREE C
13/30285283 DC : 0 BS EN 13001-3-5 - CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATE AND PROOF OF COMPETENCE OF FORGED HOOKS
I.S. EN 1993-5:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING (INCLUDING IRISH NATIONAL ANNEX)
BS EN 1090-1 : 2009 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
DIN EN 15001-1:2011-02 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
04/30116684 DC : DRAFT JUL 2004 EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LPG METALLIC PRESSURE DRUMS WITH A CAPACITY BETWEEN (150 AND 1 000 LITRES)
BS EN 10088-5:2009 Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
I.S. EN 10045-2:1993 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 2: VERIFICATION OF THE TESTING MACHINE (PENDULUM IMPACT)
DIN EN 12693:2016-10 (Draft) REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
11/30239494 DC : 0 BS EN 10149-2 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS
PREN 13709 : DRAFT 2009 INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
PREN 1984 : DRAFT 2009 INDUSTRIAL VALVES - STEEL GATE VALVES
07/30166055 DC : 0 BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
I.S. EN 334:2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
UNI EN 1515-4 : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
BS EN 4700-005:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock
UNE-EN 1090-1:2011 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
11/30239473 DC : 0 BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DD CEN/TS 13001-3-1 : 2004 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
NF EN 4700-005 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
03/103470 DC : DRAFT FEB 2003 BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS
09/30207501 DC : 0 BS EN 10217-1 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
DD CEN/TS 15718:2011 Railway applications. Wheelsets and bogies. Product requirements for cast wheels
UNI EN 334 : 2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
BS EN 12693:2008 Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
PREN 10217-4 : DRAFT 2009 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
I.S. EN 4700-001:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
06/19981869 DC : DRAFT OCT 2006 BS ISO 16877 - SHORT LINK CHAIN FOR LIFTING PURPOSES - GRADE TH, FINE TOLERANCE FOR MANUALLY OPERATED CHAIN HOISTS
05/30132585 DC : DRAFT APR 2005 EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
EN 12079-2 : 2006 OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 2: LIFTING SETS - DESIGN, MANUFACTURE AND MARKING
08/30184312 DC : DRAFT SEP 2008 BS EN 12952-6 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER
07/30173607 DC : 0 BS EN 15718 - RAILWAY APPLICATIONS - MONOBLOCK WHEEL PRODUCTS - CAST WHEELS
04/30117386 DC : DRAFT JUL 2004 EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
DIN 8563-123:1994-06 (Draft) QUALITY ASSURANCE OF WELDED STRUCTURES; SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS; WELDING PROCEDURE TEST FOR PIPELINE WELDING ON SITE
I.S. EN 13766:2010 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
ONORM EN 334 : JUN 2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
PREN 10149-2 : DRAFT 2011 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS
I.S. EN 10217-6:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
I.S. EN 10217-5:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN 10253-2:2007 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
BS EN 10217-4:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy steel tubes with specified low temperature properties
UNI EN 14399-10 : 2009 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
ONORM EN 14399-10 : JUN 2009 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
PREN 10217-3 : DRAFT 2009 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
DIN EN 10217-6:2005-04 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
UNE-EN 10088-4:2010 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
NF EN 4700-002 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
NF EN 1804-2 : 2002 + A1 2010 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS
I.S. EN 10253-2:2007 BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
DIN EN 1804-1:2010-05 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements (includes Amendment A1:2010)
NF EN 13262 : 2004 + A2 2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
DIN EN 1804-2:2010-05 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams (includes Amendment A1:2010)
DIN EN 12284:2004-01 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
DIN EN 1984:2010-10 Industrial valves - Steel gate valves
DIN EN 14382:2016-05 (Draft) SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 10297-1:2003-06 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
DIN EN 15049:2007-12 Railway applications - Suspension components - Torsion bar, steel
BS EN 1993-1-10:2005 Eurocode 3. Design of steel structures Material toughness and through-thickness properties
BS EN 14532-1:2004 Welding consumables. Test methods and quality requirements Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
BS EN 10162:2003 Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
BS EN 334 : 2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
BS EN 10155:1993 Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions
BS EN 10025:1993 Hot rolled products of non-alloy structural steels. Technical delivery conditions
BS EN 13322-2:2003 Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction Stainless steel
BS EN 1984:2010 Industrial valves. Steel gate valves
BS EN 14620-3:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Concrete components
BS EN 13709:2002 Industrial valves. Steel globe and globe stop and check valves
BS EN ISO 21329:2004 Petroleum and natural gas industries. Pipeline transportation systems. Test procedures for mechanical connectors
UNI EN 1804-2 : 2010 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS
DIN EN 10208-2:2009-07 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
EN 1804-2:2001+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams
I.S. EN 13889:2003 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY
DIN EN 14585-1:2006-04 Corrugated metal hose assemblies for pressure applications - Part 1: Requirements
I.S. EN 1804-1:2002 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS
DIN EN 10210-1:2006-07 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
DIN EN 10213-1:1996-01 TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL
I.S. EN 1804-2:2002 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS
I.S. EN 1984:2010 INDUSTRIAL VALVES - STEEL GATE VALVES
EN 1804-1:2001+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements
I.S. EN 13411-6:2004 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
I.S. EN 10219-1:2006 COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
I.S. EN 10083-2:2006 STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS
UNI EN 1804-1 : 2010 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS
I.S. EN 13411-7:2006 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
I.S. EN 10210-1:2006 HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
I.S. EN 13709:2010 INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
DIN EN 10083-3:2007-01 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
EN 13155:2003+A2:2009 Cranes - Safety - Non-fixed load lifting attachments
DIN EN 10025-1:2005-02 Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004
I.S. EN 13155:2003 CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS
I.S. EN 88-2:2007 PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 500 MBAR UP TO AND INCLUDING 5 BAR
BS 1113:1992 Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers)
11/30239491 DC : 0 BS EN 10149-1 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS
BS EN 10217-1:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties
03/103468 DC : DRAFT FEB 2003 BS EN 10210-1 - HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS
02/712507 DC : DRAFT OCT 2002 EN 14585 - PRESSURISED CORRUGATED METAL HOSE ASSEMBLIES
DIN EN 14399-10:2016-01 (Draft) HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
BS EN 14399-8:2007 High-strength structural bolting assemblies for preloading System HV. Hexagon fit bolt and nut assemblies
04/30123271 DC : DRAFT OCT 2004 EN 10340 - STEEL CASTINGS FOR STRUCTURAL USES
UNI EN 12693 : 2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
11/30235499 DC : 0 BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
09/30205877 DC : 0 BS EN 1984 - INDUSTRIAL VALVES - STEEL GATE VALVES
I.S. EN 12567:2000 INDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS
09/30207511 DC : 0 BS EN 10217-4 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
BS EN 14638-3:2010 Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded carbon steel cylinders made to a design justified by experimental methods
UNI EN 4700-005 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
UNI EN 10088-5 : 2009 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction
NF EN 13766 : 2010 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
DIN EN 10253-4:2008-06 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
PREN 1562 : DRAFT 2009 FOUNDING - MALLEABLE CAST IRONS
12/30260955 DC : 0 BS EN 13796-1 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS
09/30205883 DC : 0 BS EN 13709 - INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
07/30165594 DC : DRAFT AUG 2007 BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL TANKS FOR LIQUEFIED PETROLEUM GAS (LPG) - ROAD TANKERS DESIGN AND MANUFACTURE
09/30207514 DC : 0 BS EN 10217-5 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
06/19981867 DC : DRAFT OCT 2006 BS ISO 16872 - SHORT LINK CHAIN FOR LIFTING PURPOSES - GRADE VH, FINE TOLERANCE FOR MANUALLY OPERATED CHAIN HOISTS
01/715451 DC : DRAFT NOV 2001 PREN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES
NF EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNI CEN/TS 13001-3-1 : 2005 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
NF EN 4700-006 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
09/30207521 DC : 0 BS EN 10217-7 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
04/30118252 DC : DRAFT AUG 2004 EN 14917 - METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
06/30155635 DC : 0 EN 13261 - RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
00/715206 DC : DRAFT OCT 2000 PREN 14015-1 - SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, METALLIC TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE - PART 1: STEEL TANKS
01/705811 DC : 0 BS 5892-7 - RAILWAY ROLLING STOCK MATERIALS - PART 7: SPECIFICATION FOR CAST WHEELS FOR TRACTION AND TRAILING STOCK
05/30132603 DC : DRAFT APR 2005 EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
I.S. EN 10085:2001 NITRIDING STEELS - TECHNICAL DELIVERY CONDITIONS
UNI EN 10253-4 : 2009 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
DIN EN 13001-3-1:2013-12 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
DIN EN 13766:2010-11 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
ONORM EN 13322-1 : 2006 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
I.S. EN 10217-1:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
EN 14399-7:2007 High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
PREN 14359 : DRAFT 2014 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
DIN EN 10217-5:2005-04 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
PREN 10217-7 : DRAFT 2009 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
DIN EN 10217-3:2005-04 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
DIN EN 14399-7:2016-01 (Draft) HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
DIN EN 13322-1:2006-05 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
DIN EN 10217-1:2005-04 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
DIN EN 334:2016-05 (Draft) GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
I.S. EN 4700-006:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
I.S. EN 12927-4:2004 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS
EN 13766:2010 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
BS EN 10217-6:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy steel tubes with specified low temperature properties
I.S. EN 10225:2009 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
I.S. EN 14917:2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
DIN EN 10083-1:2006-10 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 13155:2009-08 Cranes - Safety - Non-fixed load lifting attachments (includes Amendment A2:2009)
DIN EN 10340:2008-01 Steel castings for structural uses
DIN EN 14276-2:2011-05 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
BS EN 13889 : 2003 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY
BS EN 12079-2:2006 Offshore containers and associated lifting sets Lifting sets. Design, manufacture and marking
BS EN 10208-2:2009 Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B
BS EN 1964-2:2001 Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless steel with an <i>R</i><sub>m</sub> value of 1 100 MPa and above
BS EN 13322-1 : 2003 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
BS EN 12567:2000 Industrial valves. Isolating valves for LNG. Specification for suitability and appropriate verification tests
BS EN 13411-6 : 2004 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
UNI EN 13262 : 2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
UNI EN 13261 : 2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
UNI EN 14276-2 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
EN 13261:2009+A1:2010 Railway applications - Wheelsets and bogies - Axles - Product requirements
I.S. EN 13262:2004 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
UNE-EN 10225:2010 Weldable structural steels for fixed offshore structures - Technical delivery conditions
EN 13262:2004+A2:2011 Railway applications - Wheelsets and bogies - Wheels - Product requirements
EN 14208:2004 Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
UNI EN 10208-2 : 2009 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
UNI EN 10225 : 2009 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
UNI EN 1993-5 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING
UNI EN 10250-1 : 2001 OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - GENERAL REQUIREMENTS
UNI EN 10083-1 : 2006 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNI EN 10219-1 : 2006 COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
UNI EN 13889 : 2009 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6: SAFETY
UNI EN 1993-1-10 : 2005 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES
UNI EN 10083-3 : 2006 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
UNI EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNI EN 13411-6 : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
UNI EN 14382 : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
UNI EN 1984 : 2010 INDUSTRIAL VALVES - STEEL GATE VALVES
I.S. EN 10250-1:2000 OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 1: GENERAL REQUIREMENTS
UNI EN 13709 : 2010 INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
DD CEN/TS 13001-3-5:2010 Cranes. General design Limit states and proof of competence of forged hooks
UNI CEN/TS 15718 : 2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS
BS EN 10217-2 : 2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
DIN EN 10343:2009-07 STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
PREN 13796-1 : DRAFT 2012 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOWHANGERS
08/30181655 DC : DRAFT SEP 2008 BS EN 13001-3-1 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
I.S. EN 12079-2:2006 OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 2: LIFTING SETS - DESIGN, MANUFACTURE AND MARKING
04/30111048 DC : 0 EN 88-2 - PRESSURE GOVERNORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2 - PRESSURE GOVERNORS FOR INLET PRESSURES BETWEEN 0.5 BAR AND 5 BAR
98/705399 DC : DRAFT MAR 1998 PREN 10025-1 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 1: GENERAL DELIVERY CONDITIONS
03/108196 DC : 0 EN 10253-4 - BUTT WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
I.S. EN 1160:1997 INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - GENERAL CHARACTERISTICS OF LIQUEFIED NATURAL GAS
I.S. EN 10025-1:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
08/30188437 DC : 0 BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
UNI EN 10343 : 2009 STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
BS EN 1515-4:2009 Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
DIN EN 10210-1:2016-01 (Draft) Hot finished structural steel hollow sections - Part 1: General; German and English version prEN 10210-1:2016
14/30274238 DC : 0 BS EN 14359 - GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
DIN EN 10088-5:2009-07 STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
UNI EN 14917 : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
05/30126202 DC : 0 EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
03/118134 DC : DRAFT NOV 2003 EN 12252 - EQUIPPING OF LIQUEFIED PETROLEUM GAS (LPG) ROAD TANKERS
08/30173031 DC : DRAFT JAN 2008 BS EN 1515-4 - FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
NF EN 4700-001 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
09/30185942 DC : 0 BS EN 13835 - FOUNDING - AUSTENITIC CAST IRONS
04/30123693 DC : DRAFT OCT 2004 EN 15048-1 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
BS EN 10253-4:2008 Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
UNI EN 14638-3 : 2010 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
05/30129555 DC : 0 PREN 4700-6 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS
BS EN 10088-4:2009 Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
NFA 36 603 : 1988 WELDABLE STEEL FORGINGS FOR BOILERS AND PRESSURE VESSELS - HIGH YIELD STRENGTH ALLOY STEELS - GRADES AND TYPES
I.S. EN 10217-4:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
I.S. EN 10088-4:2009 STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
XP CEN/TS 13001-3-5 : 2010 XP CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE FOR FORGED HOOKS
BS EN 10217-3:2002 Welded steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes
DIN EN 10217-4:2005-04 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
UNE-EN 13766:2011 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
DIN EN 10217-2:2005-04 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
UNI EN 4700-001 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
I.S. EN 12693:2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
NF EN 13261 : 2009 + A1 2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
I.S. EN 4700-005:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
NF EN 10225 : 2009 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
NF EN 1804-1 : 2002 + A1 2010 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS
DIN EN 14015:2005-02 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
DIN EN 14208:2004-05 Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
UNE-EN 10208-2:2011 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
DIN EN 10225:2009-10 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
DIN EN 88-2:2008-03 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
DIN EN 10219-1:2016-01 (Draft) Cold formed welded structural steel hollow sections - Part 1: General; German and English version prEN 10219-1:2016
DIN EN 10085:2001-07 Nitriding steels - Technical delivery conditions; English version of DIN EN 10085
BS EN 12284:2003 Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
BS EN 10025-1:2004 Hot rolled products of structural steels General technical delivery conditions
BS EN 14341:2006 Industrial valves. Steel check valves
BS EN 10213-1:1996 Technical delivery conditions for steel castings for pressure purposes General
BS EN 14620-2:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Metallic components
UNE-EN 15001-1:2010 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
BS EN 13262 : 2004 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
BS EN 10083-2:2006 Steels for quenching and tempering Technical delivery conditions for non alloy steels
BS EN 14276-2 : 2007 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
UNE-EN 1515-4:2010 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
BS EN 1964-1:2000 Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless steel with an <i>R</i><sub>m</sub> value of less than 1100 MPa
BS EN 10083-1:2006 Steels for quenching and tempering General technical delivery conditions
BS EN 14638-1:2006 Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded austenitic stainless steel cylinders made to a design justified by experimental methods
BS EN 13411-7 : 2006 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
BS EN 10137-1:1996 Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions General delivery conditions
BS EN 1964-3:2000 Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless stainless steel with an <i>R</i><sub>m</sub> value of less than 1 100 MPa
ISO 21329:2004 Petroleum and natural gas industries Pipeline transportation systems Test procedures for mechanical connectors
I.S. EN 14276-2:2007 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
BS EN 13155 : 2003 CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS
BS EN 15049:2007 Railway applications. Suspension components. Torsion bar, steel
EN 14276-2:2007+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
UNE-EN 13262:2005 Railway applications - Wheelsets and bogies - Wheels - Product requirement.
BS EN 1160:1997 Installations and equipment for liquefied natural gas. General characteristics of liquefied natural gas
BS EN 10085 : 2001-05 NITRIDING STEEL - TECHNICAL DELIVERY CONDITIONS
BS EN 13298:2003 Railway applications. Suspension components. Helical suspension springs, steel
BS EN 1804-1 : 2001 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS
EN 1515-4:2009 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
EN 14585-1:2006 Corrugated metal hose assemblies for pressure applications - Part 1: Requirements
EN 10225:2009 Weldable structural steels for fixed offshore structures - Technical delivery conditions
EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN ISO 21329:2004 Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors (ISO 21329:2004)
EN 875:1995 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
EN 4700-005:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock
EN 13709:2010 Industrial valves - Steel globe and globe stop and check valves
EN 15049:2007 Railway applications - Suspension components - Torsion bar, steel
EN 14638-1:2006 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods
EN 13889:2003+A1:2008 Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety
EN 14532-1:2004 Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
EN 14015:2004 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
EN 1964-2 : 2001 TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0,5 LITRE UP TO AND INCLUDING 150 LITRES - PART 2: CYLINDERS MADE OF SEAMLESS STEEL WITH AN R[M] VALUE OF 1 100 MPA AND ABOVE
EN 14620-3:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 3: Concrete components
EN 288-9 : 1999 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST FOR PIPELINE WELDING ON LAND AND OFFSHORE SITE BUTT WELDING OF TRANSMISSION PIPELINES
EN 14200:2004 Railway applications - Suspension components - Parabolic springs, steel
EN 1964-3:2000 Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPa
EN 1984:2010 Industrial valves - Steel gate valves
EN 14620-2:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 2: Metallic components
EN 334:2005+A1:2009 Gas pressure regulators for inlet pressures up to 100 bar
EN 286-3:1994 Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
EN 1964-1:1999/AC:1999 TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0.5 LITRE UP TO AND INCLUDING 150 LITRES - PART 1: CYLINDERS MADE OF SEAMLESS STEEL WITH AN RM VALUE OF LESS THAN 1100 MPA
EN 4700-001:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip
EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
EN 4700-006:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings
EN 14341:2006 Industrial valves - Steel check valves
09/30187760 DC : DRAFT JULY 2009 BS EN 1562 - FOUNDING - MALLEABLE CAST IRONS
03/109805 DC : DRAFT JUNE 2003 EN 0023095 - TRANSPORTABLE GAS CYLINDERS - WELDED AUSTENITIC STAINLESS STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY FE OR EXPERIMENTAL METHODS
I.S. EN 14341:2006 INDUSTRIAL VALVES - STEEL CHECK VALVES
08/30184300 DC : DRAFT SEP 2008 BS EN 12952-2 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
PREN 88-2 : DRAFT 2014 SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 50 KPA UP TO AND INCLUDING 500 KPA AND ASSOCIATED SAFETY DEVICES
11/30248438 DC : 0 BS EN 14141 - VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
PREN 10217-2 : DRAFT 2009 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
02/710858 DC : DRAFT SEP 2002 BS EN 14532-1 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS
01/715452 DC : DRAFT NOV 2001 PREN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES
BS EN 15001-1:2009 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
NF EN 14638-3 : 2010 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL, CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
UNE-EN 14276-2:2008 Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
DIN EN 1515-4:2010-04 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
UNE-EN 14638-3:2011 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods
08/30182457 DC : DRAFT JULY 2008 BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
98/712958 DC : DRAFT AUG 1998 PREN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
04/30124490 DC : DRAFT OCT 2004 EN 15049 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL
97/703009 DC : 0 PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C
DIN EN 14399-8:2016-01 (Draft) HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
EN 12079-1 : 2006 OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING
PREN 10217-5 : DRAFT 2009 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
05/30132598 DC : DRAFT APR 2005 EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS
S.R. CEN/TS 15718:2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS
PREN 10025-1 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
PREN 4700-001 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
PREN 4700-002 : 200P3 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
I.S. EN 1090-1:2009 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
NF EN 1090-1 : 2009 + A1 2012 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
I.S. EN 14399-7:2007 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
PREN 1559-1 : DRAFT 2009 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
I.S. EN 10343:2009 STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
UNI EN 14399-8 : 2008 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
I.S. EN 10253-4:2008 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
BS EN 14399-10:2009 High-strength structural bolting assemblies for preloading System HRC. Bolt and nut assemblies with calibrated preload
I.S. EN 10217-2:2002 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
UNI EN 10088-4 : 2009 STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
PREN 10149-1 : DRAFT 2011 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS
UNE-EN 14917:2011 Metal bellows expansion joints for pressure applications
BS EN 13766:2010 Thermoplastic multilayer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification
KTA 3201.3 : 2007(R2012) COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE
I.S. EN 15001-1:2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
I.S. EN 14399-8:2007 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
I.S. EN 10083-3:2006 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
DIN EN 1993-1-10:2010-12 Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties (includes Corrigendum AC:2009)
DIN EN 10025-1:2011-04 (Draft) Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011
DIN EN 13298:2003-11 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HELICAL SUSPENSION SPRINGS, STEEL
BS EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes
BS EN 12079-1:2006 Offshore containers and associated lifting sets Offshore containers. Design, manufacture and marking
BS EN 10296-1:2003 Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes
BS EN 1251-2:2000 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1000 litres volume Design, fabrication, inspection and testing
BS EN 14208:2004 Transportable gas cylinders. Specification for welded pressure drums up to 1000 litre capacity for the transport of gases. Design and construction
DIN EN 10296-1:2004-02 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
BS EN 1252-2:2001 Cryogenic vessels. Materials Toughness requirements for temperatures between -80°C and -20°C
BS EN 10294-1:2005 Hollow bars for machining. Technical delivery conditions Non alloy and alloy steels
BS EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements
BS EN 12927-4:2004 Safety requirements for cableway installations designed to carry person. Ropes End fixings
BS EN 14585-1:2006 Corrugated metal hose assemblies for pressure applications Requirements
BS EN 10225:2009 Weldable structural steels for fixed offshore structures. Technical delivery conditions
BS EN 10254:1999 Steel closed die forgings. General technical delivery conditions
BS EN 1804-2 : 2001 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS
BS EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels Technical delivery requirements
BS EN 288-9:1999 Specification and approval of welding procedures for metallic materials Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines
DIN EN 10294-1:2005-12 Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels
DIN EN 12693:2008-09 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
DIN EN 13411-6:2009-04 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET
CEN/TS 13001-3-5:2010 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
EN 12284 : 2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
ONORM EN 10253-2 : 2008 BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
EN 10137-1 : 1995 PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - GENERAL DELIVERY CONDITIONS
ONORM EN 13411-7 : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
EN 10088-5:2009 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
EN 10343:2009 Steels for quenching and tempering for construction purposes - Technical delivery conditions
EN 10208-2:2009 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
DIN EN 10219-1:2006-07 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10250-1:1999 Open die steel forgings for general engineering purposes - Part 1: General requirements
DIN EN 1993-5:2010-12 Eurocode 3: Design of steel structures - Part 5: Piling (includes Corrigendum AC:2009)
EN 12567:2000 Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests
DIN EN 1090-1:2012-02 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components (includes Amendment A1:2011)
DIN EN 13411-7:2009-04 Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket (includes Amendment A1:2008)
DIN EN 14200:2004-05 Railway applications - Suspension components - Parabolic springs, steel
EN 13298:2003 Railway applications - Suspension components - Helical suspension springs, steel
DIN EN 14638-1:2006-07 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods
DIN EN 10162:2003-12 Cold-rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances; German version EN 10162:2003
BS 3602-2:1991 Specification for steel pipes and tubes for pressure purposes: carbon and carbon manganese steel with specified elevated temperature properties Specification for longitudinally arc welded tubes
UNE-EN 1804-1:2003 Machines for underground mines. Safety requirements for hydraulic powered roof supports. Part 1: Support units and general requiremetns.
UNE-EN 1804-2:2003 Machines for underground mines. Safety requirements for hydraulic powered roof supports. Part 2: Power set legs and rams.

EN 10045-2 : 1992 COR 1993 METALLIC MATERIALS - CHARPY IMPACT TEST - VERIFICATION OF THE TESTING MACHINE (PENDULUM IMPACT)
ISO 286-1:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.