• There are no items in your cart

EN 12811-3:2002

Current
Current

The latest, up-to-date edition.

Temporary works equipment - Part 3: Load testing
Published date

11-20-2002

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Typical test procedures
   4.1 Basis
   4.2 Types of tests
5 General requirements for load testing
6 Testing of materials
   6.1 General
   6.2 Sampling
   6.3 Test methods
7 Testing of configurations and components
   7.1 General
   7.2 Tests to determine load bearing capacity,
         stiffness, and looseness
   7.3 Repeated loading
   7.4 Vibration tests
   7.5 Impact tests
8 Testing of system configurations
9 Documentation of test results
   9.1 General
   9.2 Content of test report
   9.3 Detailed instructions to the content
10 Evaluation of load bearing capacity, stiffness from
   testing metallic configurations and components
   10.1 General
   10.2 Approximation functions
   10.3 Dissipation of energy
   10.4 The ultimate value of the resistance r[a][u,i]
   10.5 The partial safety factor gamma[R2] depending
         upon the ductility
   10.6 Adjustment of the ultimate values r[a][u,i] to
         r[b][u,i] depending on deviations of the
         dimensions of the cross section
   10.7 Adjustment of the ultimate values r[b][u,i] to
         r[c][u,i] depending on the material properties
   10.8 Statistical determination of the basic
         characteristic value of the resistance R[k,b]
   10.9 Determination of the nominal characteristic value
         of the resistance R[k,nom]
   10.10 Evaluation of looseness, stiffness
Annex A (informative) Example for the determination of an
        approximation function, of the quotient q[theta]
        for the dissipation of energy and of the partial
        safety factor gamma [R2]
   A.1 Basis
   A.2 Approximation functions
   A.3 Dissipation of energy
   A.4 Partial safety factor gamma[R2]
Annex B (informative) Example for the statistical
        evaluation of test results and determination of
        the nominal characteristic value of the
        resistance
   B.1 Basis
   B.2 Calculations
Annex C (informative) Example for the evaluation of
        stiffness
   C.1 Basis
   C.2 Comparison of the averaged stiffnesses in
         positive C[pp] and negative C[mm] load
   C.3 Resulting stiffness
Bibliography

This standard specifies general rules for: - testing; - documentation of test results and - evaluation of test results in the field of (non mechanical) temporary works items.

Committee
CEN/TC 53
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

I.S. EN 74-1:2005 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES
12/30248282 DC : 0 BS EN 12811-4 - TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
02/107768 DC : DRAFT DEC 2002 BS EN 74-1 - COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES
07/19978687 DC : 0 BS EN 74-2 - COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
I.S. EN 16704-2-2:2016 RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS
UNI EN 74-2 : 2009 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
UNE-EN 74-2:2010 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
DIN EN 12813:2004-09 Temporary works equipment - Loadbearing towers of prefabricated components - Particular methods of structural design
BS EN 12813:2004 Temporary works equipment. Load bearing towers of prefabricated components. Particular methods of structural design
EN 12810-1:2003 Façade scaffolds made of prefabricated components - Part 1: Products specifications
EN 12811-1:2003 Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design
EN 12813:2004 Temporary works equipment - Load bearing towers of prefabricated components - Particular methods of structural design
EN 12812:2008 Falsework - Performance requirements and general design
DIN EN 16031:2012-09 ADJUSTABLE TELESCOPIC ALUMINUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS
BS EN 16031:2012 Adjustable telescopic aluminium props. Product specifications, design and assessment by calculation and tests
14/30285802 DC : 0 BS EN 16704-2-2 - RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS
DIN 4420-1:2004-03 Service and working scaffolds - Part 1: Service scaffolds - Performance requirements, general design, structural design
I.S. EN 12811-4:2013 TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
I.S. EN 74-3:2007 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 3: PLAIN BASE PLATES AND SPIGOT PINS - REQUIREMENTS AND TEST PROCEDURES
UNE-EN 13374:2013 Temporary edge protection systems - Product specification - Test methods
DIN EN 74-1:2005-12 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
I.S. EN 12812:2008 FALSEWORK - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN
I.S. EN 1004:2005 MOBILE ACCESS AND WORKING TOWERS MADE OF PREFABRICATED ELEMENTS - MATERIALS, DIMENSIONS, DESIGN LOADS, SAFETY AND PERFORMANCE REQUIREMENTS
DIN EN 13374:2013-07 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
I.S. EN 13374:2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
UNI EN 12811-4 : 2014 TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
BS EN 74-2:2008 Couplers, spigot pins and baseplates for use in falsework and scaffolds Special couplers. Requirements and test procedures
BS EN 74-3:2007 Couplers, spigot pins and baseplates for use in falsework and scaffolds Plain base plates and spigot pins. Requirements and test procedures
UNE-EN 14653-1:2012 Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications
08/30171944 DC : DRAFT JAN 2008 BS EN 12812 - FALSE WORK - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN
BS EN 16704-2-2:2016 Railway applications. Track. Safety protection on the track during work Common solutions and technology. Requirements for barriers
I.S. EN 16031:2012 ADJUSTABLE TELESCOPIC ALUMINIUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS
I.S. EN 74-2:2008 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
UNE-EN 16704-2-2:2017 Railway applications - Track - Safety protection on the track during work - Part 2-2: Common solutions and technology - Requirements for barriers
UNI EN 74-3 : 2007 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 3: PLAIN BASE PLATES AND SPIGOT PINS - REQUIREMENTS AND TEST PROCEDURES
DIN EN 1004:2005-03 Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements
DIN EN 12812:2008-12 FALSEWORK - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN
BS EN 12810-1:2003 Facade scaffolds made of prefabricated components Product specifications
EN 16704-2-2:2016 Railway applications - Track - Safety protection on the track during work - Part 2-2: Common solutions and technology - Requirements for barriers
UNI EN 13374 : 2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
ONORM EN 74-2 : 2009 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
ONORM EN 74-1 : 2006 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES
UNI EN 12812 : 2008 FALSEWORK - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN
DIN EN 74-3:2007-07 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures
09/30211977 DC : 0 BS EN 16031 - ADJUSTABLE TELESCOPIC ALUMINIUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS
DIN EN 12811-4 E : 2014 TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
DIN EN 16704-2-2:2014-07 (Draft) RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS
EN 13374:2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
11/30250535 DC : DRAFT DEC 2011 BS EN 13374 - TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
05/19978685 DC : 0 BS EN 74-3 - COUPLERS, SPIGOT PINS AND BASE PLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 3: PLAIN BASE PLATES AND SPIGOT PINS - REQUIREMENTS AND TEST METHODS
DIN EN 16704-2-2 E : 2017 RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS
BS EN 12811-4:2013 Temporary works equipment Protection fans for scaffolds. Performance requirements and product design
UNI EN 16031 : 2012 ADJUSTABLE TELESCOPIC ALUMINIUM PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS
DIN EN 14653-2:2005-07 MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 2: ASSESSMENT BY CALCULATION OR TEST
DIN EN 14653-1:2005-07 MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 1: PRODUCT SPECIFICATIONS
BS EN 74-1:2005 Couplers, spigot pins and baseplates for use in falsework and scaffolds Part 1: Couplers for tubes - Requirements and test procedures
BS EN 12812:2008 Falsework. Performance requirements and general design
BS EN 14653-2:2005 Manually operated hydraulic shoring systems for groundwork support Assessment by calculation or test
BS EN 12811-1:2003 Temporary works equipment Scaffolds. Performance requirements and general design
BS EN 12810-2:2003 Facade scaffolds made of prefabricated components Particular methods of structural design
BS EN 13374 : 2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
EN 74-2:2008 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
EN 14653-2:2005 Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test
EN 74-3:2007 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures
EN 14653-1:2005 Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications
EN 16031:2012 Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests
EN 74-1:2005 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
I.S. EN 12810-1:2004 FACADE SCAFFOLDS MADE OF PREFABRICATED ELEMENTS - PRODUCT SPECIFICATIONS
DIN EN 12811-4:2014-03 TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
DIN EN 74-2:2009-01 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
UNE-EN 12811-4:2015 Temporary works equipment - Part 4: Protection fans for scaffolds - Performance requirements and product design
UNE-EN 14653-2:2012 Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test
UNE-EN 16031:2013 Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests
BS EN 14653-1:2005 Manually operated hydraulic shoring systems for groundwork support Product specifications
BS EN 1004:2004 Mobile access and working towers made of prefabricated elements. Materials, dimensions, design loads, safety and performance requirements
EN 12811-4 : 2013 TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
EN 12810-2:2003 Façade scaffolds made of prefabricated components - Part 2: Particular methods of structural design
DIN EN 16704-2-2:2017-03 RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-2: COMMON SOLUTIONS AND TECHNOLOGY - REQUIREMENTS FOR BARRIERS
DIN EN 12810-1:2004-03 Facade scaffolds made of prefabricated components - Part 1: Products specifications
DIN EN 12811-1:2004-03 Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design
EN 1004:2004 Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements
DIN EN 12810-2:2004-03 Facade scaffolds made of prefabricated components - Part 2: Particular methods of structural design

ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
EN 789:2004 Timber structures - Test methods - Determination of mechanical properties of wood based panels
EN 408:2010+A1:2012 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
ENV 1993-1-3:1996/AC:1997 EUROCODE 3: DESIGN OF STEEL STRUCTURES - GENERAL RULES - SUPPLEMENTARY RULES FOR COLD FORMED THIN GAUGE MEMBERS AND SHEETING

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.