• There are no items in your cart

EN 14033-1:2017

Current

Current

The latest, up-to-date edition.

Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running

Published date

05-31-2017

European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Machine categorization
5 Rolling stock gauge
6 Frame
7 Bogie and running gear
8 Running safety
9 Brakes
10 Buffing and draw gear
11 Operation of track circuits, axle-counters, treadles for
   level crossings, hot box detectors and unreleased brake
   detectors
12 Running safety equipment
13 Warning equipment and lights
14 Drivers cabs and driving positions
15 Safety design features
16 Environmental conditions
17 Aerodynamic effects
18 Design for recovery purposes
19 Machine marking
20 User information
Annex A (normative) - Application of technical requirements
        to machines categories
Annex B (normative) - Special national conditions
Annex C (normative) - Machine diagram with gauge and
        critical points
Annex D (normative) - Free space at the end of the machine
Annex E (informative) - Steps, handrails and door handles
Annex F (informative) - Identification plate
Annex G (normative) - Marking
Annex H (normative) - On board safety equipment
Annex I (informative) - Structure of European Standards for
        track construction and maintenance machines
Annex J (informative) - Clause by clause comparison with
        Commission Regulation (EU) No 1302/2014 (Loc&Pas TSI)
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU Directive
         2008/57/EC
Bibliography

This European Standard defines the specific technical railway requirements for running of machines and other vehicles used for construction, maintenance and inspection of track, structures, track formation and fixed electric traction equipment. Special national conditions applicable to specific member states are shown in Annex B.This European Standard applies to all railbound machines and other vehicles - referred to as machines - running exclusively on the railway (utilizing adhesion between the rail and wheels) and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and control systems. Other machines are dealt with in other European Standards, see Annex I.This European Standard is written for 1 435 mm nominal track gauge; special requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, urban railways, railways utilizing other than adhesion between the rail and wheels and road-rail machines which are not included in this standard.This European Standard covers the railway specific requirements for movements of the machine as a train and movements to reach work sites.

Committee
CEN/TC 256
DevelopmentNote
Supersedes PREN 14033-1. (06/2017)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

DIN EN 15746-1:2016-02 (Draft) Railway applications - Track - Road rail machines and associated equipment - Part 1: Technical requirements for travelling and working; German and English version prEN 15746-1:2015
12/30244749 DC : 0 BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
BS EN 16186-1 : 2014 RAILWAY APPLICATIONS - DRIVER'S CAB - PART 1: ANTHROPOMETRIC DATA AND VISIBILITY
14/30258500 DC : 0 BS EN 14033-2 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
13/30241462 DC : 0 BS EN 16186-2 - RAILWAY APPLICATIONS - DRIVER'S CAB - PART 2: INTEGRATION OF DISPLAYS, CONTROLS AND INDICATORS
12/30244746 DC : 0 BS EN 15955-1 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
DIN EN 15954-1:2014-06 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
12/30244743 DC : 0 BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
08/30189631 DC : DRAFT SEP 2008 BS EN 50215 - RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE
I.S. EN 50215:2009 RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE
I.S. EN 16452:2015+A1:2019 RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCKS
BS EN 14363:2005 Railway applications. Testing for the acceptance of running characteristics of railway vehicles. Testing of running behavior and stationary tests
BS EN 15746-1 : 2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
17/30344378 DC : 0 BS EN 16186-4 - RAILWAY APPLICATIONS - DRIVER'S CAB - PART 4: LAYOUT AND ACCESS
DIN EN 16186-1:2015-03 RAILWAY APPLICATIONS - DRIVER'S CAB - PART 1: ANTHROPOMETRIC DATA AND VISIBILITY
15/30279805 DC : 0 BS EN 15746-1 - RAILWAY APPLICATIONS - TRACK - ROAD RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
CEI EN 50215 : 2011 RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE
UNE-EN 13977:2012 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
BS EN 280 : 2013 MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
UNE-EN 15954-1:2014 Railway applications - Track - Trailers and associated equipment - Part 1: Technical requirements for running and working
I.S. EN 13977:2011 RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
DIN EN 16704-1:2017-11 Railway applications - Track - Safety protection on the track during work - Part 1: Railway risks and common principles for protection of fixed and mobile work sites
DIN EN 14033-2:2017-10 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
DIN EN 15955-2:2013-09 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN 14033-2:2014-08 (Draft) RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
BS EN 14033-3 : 2009 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
14/30293535 DC : 0 BS EN 16704-1 - RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 1: RAILWAY RISKS AND COMMON PRINCIPLES FOR PROTECTION OF FIXED AND MOBILE WORK SITES
15/30304272 DC : DRAFT DEC 2015 BS EN 15746-3 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 3: TECHNICAL REQUIREMENTS FOR RUNNING
14/30270317 DC : 0 BS EN 14198 - RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS FOR GENERAL OPERATION
05/30133277 DC : DRAFT MAY 2005
PREN 15746-2 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 15746-2:2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 16704-2-1:2016 RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-1: COMMON SOLUTIONS AND TECHNOLOGIES - TECHNICAL REQUIREMENTS FOR TRACK WARNING SYSTEMS (TWS)
I.S. EN 16186-1:2014 RAILWAY APPLICATIONS - DRIVER'S CAB - PART 1: ANTHROPOMETRIC DATA AND VISIBILITY
BS EN 14033-2:2017 Railway applications. Track. Railbound construction and maintenance machines Technical requirements for travelling and working
I.S. EN 15955-2:2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
PREN 14033-4 : DRAFT 2017 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 4: TECHNICAL REQUIREMENTS FOR RUNNING, TRAVELLING AND WORKING ON URBAN RAIL
I.S. EN 14198:2016 RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES
EN 14198:2016 Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives
PREN 14198 : DRAFT 2014 RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS FOR GENERAL OPERATION
I.S. EN 14033-3:2017 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
EN 15746-2:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
EN 15746-1:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working
UNI EN 15746-1 : 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
I.S. EN 280:2013 MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
UNI EN 15746-2 : 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNE-EN 16704-1:2017 Railway applications - Track - Safety protection on the track during work - Part 1: Railway risks and common principles for protection of fixed and mobile work sites
BS EN 15954-1:2013 Railway applications. Track. Trailers and associated equipment Technical requirements for running and working
BS EN 16704-2-1:2016 Railway applications. Track. Safety protection on the track during work Common solutions and technologies. Technical requirements for Track Warning Systems (TWS)
NF EN 15746-1 : 2010 + A1 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
12/30244740 DC : 0 BS EN 15954-1 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
BS EN 50215:2009 Railway applications — Rolling stock — Testing of rolling stock on completion of construction and before entry into service
BS EN 14198 : 2016 RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES
BS EN 16704-1:2016 Railway applications. Track. Safety protection on the track during work Railway risks and common principles for protection of fixed and mobile work sites
UNE-EN 14363:2017 Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests
15/30309997 DC : 0 BS EN 15663 - RAILWAY APPLICATIONS - VEHICLE REFERENCE MASSES
NF EN 15746-2 : 2010 + A1 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 15955-1:2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
EN 16186-1:2014 Railway applications - Driver's cab - Part 1: Anthropometric data and visibility
I.S. EN 16704-1:2016 RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 1: RAILWAY RISKS AND COMMON PRINCIPLES FOR PROTECTION OF FIXED AND MOBILE WORK SITES
UNE-EN 15954-2:2014 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
UNE-EN 15955-2:2014 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
DIN EN 14198:2017-03 RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES
UNI EN 15955-1 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
UNI EN 15954-2 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 13977 : 2011 RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
UNI EN 15954-1 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
UNI EN 15955-2 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN 16704-1:2014-04 (Draft) RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 1: RAILWAY RISKS AND COMMON PRINCIPLES FOR PROTECTION OF FIXED AND MOBILE WORK SITES
12/30156938 DC : 0 BS EN 16452 - RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCKS
DIN EN 14033-3:2014-08 (Draft) RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
BS EN 15955-2:2013 Railway applications. Track. Demountable machines and associated equipment General safety requirements
I.S. EN 14033-2:2017 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
UNE-EN 16186-1:2015 Railway applications - Driver's cab - Part 1: Anthropometric data and visibility
I.S. EN 15954-1:2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
BS EN 16452:2015+A1:2019 Railway applications. Braking. Brake blocks
DIN EN 14198:2015-01 (Draft) RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES
I.S. EN 15954-2:2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
PREN 15528 : DRAFT 2013 RAILWAY APPLICATIONS - LINE CATEGORIES FOR MANAGING THE INTERFACE BETWEEN LOAD LIMITS OF VEHICLES AND INFRASTRUCTURE
EN 16704-1:2016 Railway applications - Track - Safety protection on the track during work - Part 1: Railway risks and common principles for protection of fixed and mobile work sites
I.S. EN 15746-1:2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
EN 16452:2015 Railway applications - Braking - Brake blocks
UNE-EN 280:2014 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
DIN EN 13977:2011-04 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
DIN EN 280:2016-04 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests (includes Amendment A1:2015)
BS EN 13977:2011 Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance
UNE-EN 15955-1:2014 Railway applications - Track - Demountable machines and associated equipment - Part 1: Technical requirements for running and working
EN 15954-2:2013 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
EN 15955-2:2013 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
EN 15954-1 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
EN 13977:2011 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
EN 14033-2:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working
EN 16704-2-1:2016 Railway applications - Track - Safety protection on the track during work - Part 2-1: Common solutions and technologies - Technical requirements for Track Warning Systems (TWS)
EN 15955-1 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
EN 14033-3:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
EN 280:2013+A1:2015 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
DIN EN 15955-1:2013-08 Railway applications - Track - Demountable machines and associated equipment - Part 1: Technical requirements for running and working
13/30270305 DC : 0 BS EN 15528 - RAILWAY APPLICATIONS - LINE CATEGORIES FOR MANAGING THE INTERFACE BETWEEN LOAD LIMITS OF VEHICLES AND INFRASTRUCTURE
BS EN 15954-2:2013 Railway applications. Track. Trailers and associated equipment General safety requirements
UNE-EN 16704-2-1:2017 Railway applications - Track - Safety protection on the track during work - Part 2-1: Common solutions and technologies - Technical requirements for Track Warning Systems (TWS)
BS EN 15955-1:2013 Railway applications. Track. Demountable machines and associated equipment Technical requirements for running and working
DIN EN 15954-2:2013-11 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
I.S. EN 14363:2016 RAILWAY APPLICATIONS - TESTING AND SIMULATION FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES - RUNNING BEHAVIOUR AND STATIONARY TESTS
UNE-EN 16452:2016 Railway applications - Braking - Brake blocks
DIN EN 15746-2:2016-02 (Draft) Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015
BS EN 15746-2 : 2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
15/30279801 DC : 0 BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
17/30326148 DC : 0 BS EN 14033-4 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 4: TECHNICAL REQUIREMENTS FOR RUNNING, TRAVELLING AND WORKING ON URBAN RAIL
DIN EN 15746-1:2011-12 Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working (includes Amendment A1:2011)
EN 50215:2009 Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service
EN 14363:2016 Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests
DIN EN 16452:2015-11 RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCKS
DIN EN 15746-2:2011-12 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011)
UNE-EN 15746-1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working
UNE-EN 15746-2:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements

EN 13977:2011 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
EN 14198:2016 Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives
EN 15437-1:2009 Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 7010:2011 Graphical symbols Safety colours and safety signs Registered safety signs
EN 15313:2016 Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance
EN 15595:2009+A1:2011 RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION
UIC 527-1 : 3ED 2005 COACHES, VANS AND WAGONS - DIMENSIONS OF BUFFER HEADS - TRACK LAYOUT ON S-CURVES
EN 15611:2008+A1:2010 Railway applications - Braking - Relay valves
EN 14363:2016 Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests
EN 62625-1:2013/A11:2017 ELECTRONIC RAILWAY EQUIPMENT - ON BOARD DRIVING DATA RECORDING SYSTEM - PART 1: SYSTEM SPECIFICATION (IEC 62625-1:2013)
UIC 520 : 7ED 2003 WAGONS, COACHES AND VANS - DRAW GEAR - STANDARDISATION
EN 14531-1:2015 Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles
EN 15612:2008+A1:2010 Railway applications - Braking - Brake pipe accelerator valve
EN 15624:2008+A1:2010 Railway applications - Braking - Empty-loaded changeover devices
UIC 515-1 : 2ED 2003 PASSENGER ROLLING STOCK - TRAILER BOGIES - RUNNING GEAR - GENERAL PROVISIONS APPLICABLE TO THE COMPONENTS OF TRAILERS BOGIES
EN 14067-4:2013 Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track
EN 50121-3-2:2016 Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
UIC 541-5 : 4ED 2005 BRAKES - ELECTROPNEUMATIC BRAKE (EP BRAKE) - ELECTROPNEUMATIC EMERGENCY BRAKE OVERRIDE (EBO)
EN 15551:2017 Railway applications - Railway rolling stock - Buffers
EN 13715:2006+A1:2010 Railway applications - Wheelsets and bogies - Wheels - Tread profile
EN 15877-1:2012 Railway applications - Marking on railway vehicles - Part 1: Freight wagons
EN 50153 : 2014 AMD 1 2017 RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS
EN 15839:2012+A1:2015 Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal compressive forces
EN 15153-2:2013 Railway applications - External visible and audible warning devices for trains - Part 2: Warning horns
EN 14535-2:2011 Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements
EN 286-3:1994 Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
EN 15877-2:2013 Railway applications - Markings of railway vehicles - Part 2: External markings on coaches, motive power units, locomotives and on track machines
EN 12080:2017 Railway applications - Axleboxes - Rolling bearings
EN 15220:2016 (edition 2) Railway applications - Brake indicators
PREN 15746-2 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
EN 14535-1:2005+A1:2011 RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 1: BRAKE DISCS PRESSED OR SHRUNK ONTO THE AXLE OR DRIVE SHAFT, DIMENSIONS AND QUALITY REQUIREMENTS
UIC 512 : 1979 AMD 2 ROLLING STOCK - CONDITIONS TO BE FULFILLED IN ORDER TO AVOID DIFFICULTIES IN THE OPERATION OF TRACK CIRCUITS AND TREADLES
EN 15329:2015 Railway applications - Braking - Brake block holder and brake shoe key for railway vehicles
EN 15273-2:2013+A1:2016 Railway applications - Gauges - Part 2: Rolling stock gauge
PREN 15746-1 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
EN 15152:2007 Railway applications - Front windscreens for train cabs
ISO 8573-1:2010 Compressed air Part 1: Contaminants and purity classes
EN 15807:2011 Railway applications - Pneumatic half couplings
EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
EN 15179:2007 Railway applications - Braking - Requirements for the brake system of coaches
EN 15227:2008+A1:2010 Railway applications - Crashworthiness requirements for railway vehicle bodies
EN 14813-1:2006+A1:2010 Railway applications - Air conditioning for driving cabs - Part 1: Comfort parameters
EN 50125-1:2014 Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment
EN 15566:2016 Railway applications - Railway rolling stock - Draw gear and screw coupling
EN 14531-2:2015 Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 2: Step by step calculations for train sets or single vehicles
EN 14601:2005+A1:2010 Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe
EN 16116-2:2013 Railway applications - Design requirements for steps, handrails and associated access for staff - Part 2: Freight wagons
EN 286-4:1994 Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
EN 13104:2009+A2:2012 Railway applications - Wheelsets and bogies - Powered axles - Design method
UIC 541-03 : 2ED 2015 BRAKES - SPECIFICATIONS FOR THE CONSTRUCTION OF VARIOUS BRAKE PARTS - DRIVER'S BRAKE VALVE / DRIVER'S BRAKE CONTROLLER
PREN 15746-4 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 4: TECHNICAL REQUIREMENTS FOR RUNNING, TRAVELLING AND WORKING ON URBAN RAIL
EN 13261:2009+A1:2010 Railway applications - Wheelsets and bogies - Axles - Product requirements
EN 50121-3-1:2017 Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle
EN 15528:2015 Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure
EN 15955-2:2013 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
EN 14033-2:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working
EN 45545-2:2013+A1:2015 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
EN 15954-2:2013 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
EN 15153-1 : 2013 COR 2016 RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 1: HEAD, MARKER AND TAIL LAMPS
EN 13262:2004+A2:2011 Railway applications - Wheelsets and bogies - Wheels - Product requirements
EN 14067-6:2010 Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment
EN 16404:2016 Railway applications - Re-railing and recovery requirements for railway vehicles
EN 16207:2014 Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
EN 15663:2017 Railway applications - Vehicle reference masses
EN 15625:2008+A1:2010 Railway applications - Braking - Automatic variable load sensing devices
EN 13260:2009+A1:2010 Railway applications - Wheelsets and bogies - Wheelsets - Product requirements
PREN 15746-3 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 3: TECHNICAL REQUIREMENTS FOR RUNNING
EN 15806:2010 Railway applications - Braking - Static brake testing
EN 12663-1:2010+A1:2014 Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)
EN 15955-1 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
UIC 651 : 4ED 2002 LAYOUT OF DRIVER'S CABS IN LOCOMOTIVES, RAILCARS, MULTIPLE-UNIT TRAINS AND DRIVING TRAILERS
EN 50238-1 : 2003 COR 2014 RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS - PART 1: GENERAL
EN 13103:2009+A2:2012 Railway applications - Wheelsets and bogies - Non powered axles - Design method
EN 10220:2002 Seamless and welded steel tubes - Dimensions and masses per unit length
EN ISO 7010 : 2012 AMD 7 2017 GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011/AMD 7:2016)
EN 13979-1:2003+A2:2011 Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels
EN 12663-2:2010 Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons
EN 13749:2011 Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames
UIC 541-1 : 8ED 2013 BRAKES - REGULATIONS CONCERNING THE DESIGN OF BRAKE COMPONENTS
EN 15827:2011 Railway applications - Requirements for bogies and running gears
EN 15954-1 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
EN 14033-3:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
EN 15355:2008+A1:2010 Railway applications - Braking - Distributor valves and distributor-isolating devices
UIC 544-1 : 6ED 2014 BRAKES - BRAKING PERFORMANCE

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.