EN 485-4:1993
Current
The latest, up-to-date edition.
Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products
10-15-1993
This part of EN 485 specifies the tolerances on shape and dimensions for wrought aluminium and aluminium alloy sheets, strips and plates obtained by cold-rolling, for general engineering applications. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, painted, etc. sheets and strips or to special applications such as aerospace, can stock, etc. which are dealt with in separate European standards. Technical conditions for inspection and delivery of those products are specified in EN 485-1.
Committee |
CEN/TC 132
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
DIN EN 485-4:2019-05 | Identical |
ONORM EN 485-4 : 1994 | Identical |
NF EN 485-4 : 1994 | Identical |
UNE-EN 485-4:1994 | Identical |
NBN EN 485-4 : 1994 | Identical |
NEN EN 485-4 : 1994 | Identical |
NS EN 485-4 : 1ED 1994 | Identical |
I.S. EN 485-4:1994 | Identical |
PN EN 485-4 : 1997 | Identical |
SN EN 485-4 : 1995 | Identical |
UNI EN 485-4 : 1996 | Identical |
ÖNORM EN 485-4:2020 07 01 | Identical |
BS EN 485-4:1994 | Identical |
DIN EN 485-4:1994-01 | Identical |
PREN 13658-2 : DRAFT 2017 | METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: EXTERNAL RENDERING |
UNE-EN 13195:2014 | Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
17/30348213 DC : 0 | BS ISO 19426-4 - STRUCTURES FOR MINE SHAFTS - PART 4: CONVEYANCES |
BS EN 14509:2013 | Self-supporting double skin metal faced insulating panels. Factory made products. Specifications |
UNI EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
DIN EN ISO 20567-3:2013-04 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012) |
UNI EN 508-2 : 2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
17/30357430 DC | BS EN 13658-2. Metal lath and beads. Definitions, requirements and test methods. Part 2. External rendering |
DIN EN 14509:2013-12 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
PREN 14353 : DRAFT 2016 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
DIN EN 13195:2013-12 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
PREN 12392 : DRAFT 2014 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
06/30143946 DC : 0 | EN 485-1 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
DD ENV 1999-1.1 : DRAFT DEC 2000 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 101: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
98/105109 DC : DRAFT JUNE 1998 | PREN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: DURABILITY AND EVALUATION OF CONFORMITY |
ISO 4126-2:2003 | Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices |
ONORM EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
BS EN ISO 4126-2:2003 | Safety devices for protection against excessive pressure Bursting disc safety devices |
BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
I.S. EN 508-2:2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
BS EN 13480-8:2017+A1:2019 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
BS EN 13480-8:2017 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
DIN EN 1396:2015-06 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
BS EN 14286:2008 | Aluminium and aluminium alloys. Weldable rolled products for tanks for the storage and transportation of dangerous goods |
BS EN 851:2014 | Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils. Specifications |
DIN EN 508-2:2009-07 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
EN 13195:2013 | Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
EN 13195-1 : 2002 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS |
EN 12392:2016 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
13/30266550 DC : 0 | BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
UNI EN 13195 : 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
13/30286946 DC : 0 | BS EN 1396 - ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
02/105004 DC : DRAFT JULY 2002 | PREN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING SANDWICH PANELS - FACTORY MADE PRODUCTS - SPECIFICATION |
PREN 13658-1 : DRAFT 2017 | METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: INTERNAL PLASTERING |
UNE-EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2019.) |
ONORM EN 508-2 : 2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
BS EN 1999-1-1 : 2007 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
I.S. EN 1999-1-1:2007 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES (INCLUDING IRISH NATIONAL ANNEX) |
I.S. EN 14353:2017 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
DIN EN 13981-2:2004-10 | Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 2: Plates and sheets |
DIN EN 12487:2007-07 | Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
DIN EN 851:2014-07 | Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications |
DIN EN 941:2014-07 | Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications |
BS EN 941:2014 | Aluminium and aluminium alloys. Circle and circle stock for the production of general applications. Specifications |
BS EN 1462:2004 | Brackets for eaves gutters. Requirements and testing |
I.S. EN 851:2014 | ALUMINIUM AND ALUMINIUM ALLOYS - CIRCLE AND CIRCLE STOCK FOR THE PRODUCTION OF CULINARY UTENSILS - SPECIFICATIONS |
I.S. EN 485-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
I.S. EN 1462:2004 | BRACKETS FOR EAVES GUTTERS - REQUIREMENTS AND TESTING |
I.S. EN 941:2014 | ALUMINIUM AND ALUMINIUM ALLOYS - CIRCLE AND CIRCLE STOCK FOR THE PRODUCTION OF GENERAL APPLICATIONS - SPECIFICATIONS |
I.S. EN 1396:2015 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
I.S. EN 14286:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
I.S. EN 12392:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
I.S. EN 12487:2007 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
I.S. EN 13195-1:2002 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODU- PART 1: SPECIFICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
I.S. EN 13480-8:2017&LC:2019 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
UNI EN 14286 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
DIN EN 1999-1-1:2014-03 | Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules |
12/30260023 DC : 0 | BS EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
05/30133060 DC : 0 | EN 1090-3 - EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
07/30168407 DC : DRAFT DEC 2007 | BS EN 508-2 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
17/30348210 DC : 0 | BS ISO 19426-3 - STRUCTURES FOR MINE SHAFTS - PART 3: SINKING STAGES |
I.S. EN 13195:2013 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
BS EN ISO 20567-3:2012 | Paints and varnishes. Determination of stone-chip resistance of coatings Single-impact test with a free-flying impact body |
08/30187526 DC : 0 | BS EN 14121 - ALUMINIUM AND ALUMINIUM ALLOYS - ALUMINIUM SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
ISO 19426-3:2018 | Structures for mine shafts — Part 3: Sinking stages |
PREN 507 : DRAFT 2017 | ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED PRODUCTS OF ALUMINIUM SHEET |
I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
PREN 14509 : DRAFT 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
I.S. EN ISO 4126-2:2003 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES |
PREN 13480-8 : DRAFT 2012 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
UNE-EN 14353:2017 | Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods |
EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
I.S. EN 14509:2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
DIN EN 12392:2016-08 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
DIN EN 573-5:2007-11 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products |
DIN EN 1462:2004-12 | Brackets for eaves gutters - Requirements and testing |
UNE-EN 14509:2014 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
BS EN 13195-1:2002 | Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore) Specifications |
BS EN 1396:2007 | Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications |
BS EN 40-6:2002 | Lighting columns Requirements for aluminium lighting columns |
EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
UNI EN 12487 : 2007 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
UNI EN 14509 : 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
UNI EN 14121 : 2009 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
I.S. EN ISO 20567-3:2012 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012) |
DIN EN 14353:2016-02 (Draft) | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
UNI EN 1999-1-1 : 2014 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
04/30125694 DC : DRAFT NOV 2004 | EN 15088 - ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
PREN 14121 : DRAFT 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - ALUMINIUM SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
17/30357427 DC | BS EN 13658-1. Metal lath and beads. Definitions, requirements and test methods. Part 1. Internal plastering |
UNE-EN ISO 20567-3:2013 | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body (ISO 20567-3:2012) |
ISO 19426-4:2018 | Structures for mine shafts — Part 4: Conveyances |
17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
I.S. ENV 1999-1-1:1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
DIN EN 485-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS EN 12392:2016 | Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment |
BS EN 12487:2007 | Corrosion protection of metals. Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
UNE-EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
UNE-EN 508-2:2010 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium |
BS EN 13981-2:2004 | Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Plates and sheets |
BS EN 508-2:2008 | Roofing products from metal sheet. Specification for self supporting products of steel, aluminium or stainless steel sheet Aluminium |
ISO 20567-3:2012 | Paints and varnishes — Determination of stone-chip resistance of coatings — Part 3: Single-impact test with a free-flying impact body |
DIN EN 15088:2016-09 (Draft) | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German and English version prEN 15088:2016 |
BS EN 15088:2005 | Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery |
UNE-EN 12392:2017 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
UNE-EN 485-1:2017 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
EN 13981-2:2004 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets |
EN ISO 20567-3:2012 | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body (ISO 20567-3:2012) |
EN 508-2:2008 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium |
EN 1462:2004 | Brackets for eaves gutters - Requirements and testing |
EN 15088:2005 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery |
EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
UNI EN 941 : 2014 | ALUMINIUM AND ALUMINIUM ALLOYS - CIRCLE AND CIRCLE STOCK FOR THE PRODUCTION OF GENERAL APPLICATIONS - SPECIFICATIONS |
EN 14509:2013 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
EN 507:1999 | Roofing products from metal sheet - Specification for fully supported roofing products of aluminium sheet |
EN 40-6:2002 | Lighting columns - Part 6: Requirements for aluminium lighting columns |
EN 14121:2009 | Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications |
EN 941:2014 | Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications |
EN 14353:2017 | Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods |
UNI EN 851 : 2014 | ALUMINIUM AND ALUMINIUM ALLOYS - CIRCLE AND CIRCLE STOCK FOR THE PRODUCTION OF CULINARY UTENSILS - SPECIFICATIONS |
EN 573-5:2007 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products |
ENV 1999-1-1 : 1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
EN 851:2014 | Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications |
EN 14286:2008 | Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods |
EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
ONORM EN ISO 4126-2 : 2006 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES |
11/30217720 DC : 0 | BS EN ISO 20567-3 - PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY |
BS EN 13195:2013 | Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
16/30332914 DC : 0 | BS EN 14353 - METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
15/30317351 DC : 0 | BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
14/30301152 DC : 0 | BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
PREN 1396 : DRAFT 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
17/30360664 DC : 0 | BS EN 507 - ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED PRODUCTS OF ALUMINIUM SHEET |
UNI EN ISO 4126-2 : 2003 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - BURSTING DISC SAFETY DEVICES |
17/30356149 DC : 0 | BS EN 508-2 - ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
BS EN 507:2000 | Roofing products from metal sheet. Specification for fully supported roofing products of aluminium sheet |
BS EN 573-5:2007 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Codification of standardized wrought products |
BS EN 14121:2009 | Aluminium and aluminium alloys. Sheet, strip and plate for electrotechnical applications |
DIN EN 13195-1:2002-11 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS |
DIN EN 14121:2009-09 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE FOR ELECTROTECHNICAL APPLICATIONS |
DIN EN 15088:2006-03 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German version EN 15088:2005 |
DIN EN 14286:2008-11 | ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS |
DIN EN 14353:2017-09 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
BS EN 573-3:2013 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.