EN 583-1:1998/A1:2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - GENERAL PRINCIPLES
03-01-2014
01-12-2013
Foreword
1 Scope
2 Normative references
3 Qualification and certification of personnel
4 Information required prior to examination
5 Principles of ultrasonic examination
6 Equipment
7 Settings
8 Preparation for examination
9 Examination
10 Characterization of imperfections
11 Examination procedure
12 Examination report
Details the general principles needed for the ultrasonic examination of industrial products that permit the transmission of ultrasound. Application specific conditions of use of ultrasonic examination, which depend on the type of product examined are detailed in documents which could include; product standards; specifications; codes; contractual documents; written procedures. Unless otherwise stated in the referencing documents the minimum requirements of this standard are relevant.
Committee |
TC 138
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NF EN 583-1 : 1999 AMD 1 2004 | Identical |
NBN EN 583-1 : 1999 AMD 1 2004 | Identical |
I.S. EN 583-1:1999 | Identical |
NS EN 583-1 : 1999 AMD 1 2004 | Identical |
SN EN 583-1 : 1999 AMD 1 2004 | Identical |
UNI EN 583-1 : 2004 | Identical |
PN EN 583-1 : 2001 AMD 1 2006 | Identical |
DIN EN 583-1:1998-12 | Identical |
BS EN 583-1:1999 | Identical |
NEN EN 583-1 : 1999 AMD 1 2003 | Identical |
UNE-EN 583-1:1999 | Identical |
09/30186448 DC : 0 | BS EN 13941 - DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
BS EN ISO 13588:2012 | Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology |
10/30198090 DC : 0 | BS EN ISO 13588 - NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - USE OF (SEMI-) AUTOMATED PHASED ARRAY TECHNOLOGY |
DIN EN 583-6:2009-03 | NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - PART 6: TIME-OF-FLIGHT DIFFRACTION TECHNIQUE AS A METHOD FOR DETECTION AND SIZING OF DISCONTINUITIES |
02/712665 DC : DRAFT OCT 2002 | ISO 6406 - SEAMLESS STEEL GAS CYLINDERS - PERIODIC INSPECTION AND TESTING |
I.S. EN ISO 13588:2012 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - USE OF AUTOMATED PHASED ARRAY TECHNOLOGY (ISO 13588:2012) |
09/30211880 DC : 0 | BS EN 12732 - GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
EN ISO 13588:2012 | Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2012) |
04/30123011 DC : DRAFT SEP 2004 | ISO 4992-1 - STEEL CASTINGS - ULTRASONIC EXAMINATION - PART 1: STEEL CASTINGS FOR GENERAL PURPOSES |
00/716474 DC : DRAFT NOV 2000 | PREN 12680-1 - FOUNDING - ULTRASONIC INSPECTION - PART 1: STEEL CASTINGS FOR GENERAL PURPOSES |
ISO 10461:2005 | Gas cylinders Seamless aluminium-alloy gas cylinders Periodic inspection and testing |
04/30123014 DC : DRAFT SEP 2004 | ISO 4992-2 - STEEL CASTINGS - ULTRASONIC EXAMINATION - PART 2: STEEL CASTINGS FOR HIGHLY STRESSED COMPONENTS |
PREN 12392 : DRAFT 2014 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
DD CEN/TS 14751:2004 | Welding. Use of time-of-flight diffraction technique (TOFD) for examination of welds |
07/30135963 DC : 0 | BS EN 1714 - NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS |
CEN ISO/TR 25107:2006 | Non-destructive testing - Guidelines for NDT training syllabuses (ISO/TR 25107:2006) |
UNE-EN ISO 17640:2011 | Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010) |
EN 1559-3:2011 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
BS EN 583-4:2002 | Non-destructive testing. Ultrasonic examination Examination for discontinuities perpendicular to the surface |
UNE-EN 12680-3:2012 | Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings |
BS EN 489:2009 | District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
DIN EN 13100-3:2005-02 | Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing |
DIN EN 13941:2003-10 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DIRECT HEATING |
EN 12680-1:2003 | Founding - Ultrasonic examination - Part 1: Steel castings for general purposes |
DIN EN 12680-2:2003-06 | Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components; German version EN 12680-2:2003 |
EN 12680-3:2011 | Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings |
EN 12680-2:2003 | Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components |
DIN EN 12680-3:2012-02 | Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings |
CEN/TS 14751:2004 | Welding - Use of time-of-flight diffraction technique (TOFD) for examination of welds |
EN 13100-3:2004 | Non destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing |
ONORM EN 15001-1 : 2011 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
PREN 14015-1 : DRAFT 2000 | SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, METALLIC TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE - PART 1: STEEL TANKS |
I.S. EN 583-4:2002 | NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - PART 4: EXAMINATION FOR THE DISCONTINUITIES PERPENDICULAR TO THE SURFACE |
UNI EN 16090 : 2012 | COPPER AND COPPER ALLOYS - ESTIMATION OF AVERAGE GRAIN SIZE BY ULTRASOUND |
DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
I.S. EN 583-3:1997 | NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - PART 3: TRANSMISSION TECHNIQUE |
I.S. CEN TS 14751:2004 | WELDING - USE OF TIME-OF-FLIGHT DIFFRACTION TECHNIQUE (TOFD) FOR EXAMINATION OF WELDS |
10/30218967 DC : 0 | BS EN 12680-3 - FOUNDING - ULTRASONIC EXAMINATION - PART 3: SPHEROIDAL GRAPHITE CAST IRON CASTINGS |
07/30153360 DC : 0 | BS EN 489 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - JOINT ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
BS ISO 4992-1:2006 | Steel castings. Ultrasonic examination Steel castings for general purposes |
PREN 12732 : DRAFT 2009 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
BS ISO 4992-2:2006 | Steel castings. Ultrasonic examination Steel castings for highly stressed components |
UNI EN 583-6 : 2009 | NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - PART 6: TIME-OF-FLIGHT DIFFRACTION TECHNIQUE AS A METHOD FOR DETECTION AND SIZING OF DISCONTINUITIES |
15/30296830 DC : 0 | BS EN ISO 18119 - GAS CYLINDERS - SEAMLESS STEEL AND SEAMLESS ALUMINIUM-ALLOY GAS CYLINDERS AND TUBES - PERIODIC INSPECTION AND TESTING |
03/104313 DC : DRAFT FEB 2003 | ISO 10461 - SEAMLESS ALUMINIUM-ALLOY GAS CYLINDERS - PERIODIC INSPECTION AND TESTING |
UNE-EN ISO 13588:2013 | Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2012) |
ISO 4992-1:2006 | Steel castings Ultrasonic examination Part 1: Steel castings for general purposes |
I.S. EN 16090:2011 | COPPER AND COPPER ALLOYS - ESTIMATION OF AVERAGE GRAIN SIZE BY ULTRASOUND |
DIN EN 12680-3 E : 2012 | FOUNDING - ULTRASONIC TESTING - PART 3: SPHEROIDAL GRAPHITE CAST IRON CASTINGS |
DIN EN 12680-2 E : 2003 | FOUNDING - ULTRASONIC EXAMINATION - PART 2: STEEL CASTINGS FOR HIGHLY STRESSED COMPONENTS |
DIN EN 12680-1 E : 2003 | FOUNDING - ULTRASONIC EXAMINATION - PART 1: STEEL CASTINGS FOR GENERAL PURPOSES |
BS EN 1968:2002 | Transportable gas cylinders. Periodic inspection and testing of seamless steel gas cylinders |
BS EN 583-5:2001 | Non-destructive testing. Ultrasonic examination Characterization and sizing of discontinuities |
DIN EN 1714:2002-09 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS |
DIN EN 583-3:1997-06 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - PART 3: TRANSMISSION TECHNIQUE |
DIN EN 1559-3:2012-01 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
I.S. EN 13941:2009 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
I.S. EN 1559-3:2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 3: ADDITIONAL REQUIREMENTS FOR IRON CASTINGS |
DIN EN 1802:2002-09 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS |
I.S. EN 12680-3:2011 | FOUNDING - ULTRASONIC TESTING - PART 3: SPHEROIDAL GRAPHITE CAST IRON CASTINGS |
14/30294476 DC : 0 | BS EN 448 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
PD CEN ISO/TR 25107:2006 | Non-destructive testing. Guidelines for NDT training syllabuses |
00/716475 DC : DRAFT NOV 2000 | BS EN 12680-2 FOUNDING - ULTRASONIC INSPECTION - PART 2: STEEL CASTINGS FOR TURBINE COMPONENTS |
BS EN 16090:2011 | Copper and copper alloys. Estimation of average grain size by ultrasound |
00/715206 DC : DRAFT OCT 2000 | PREN 14015-1 - SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, METALLIC TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE - PART 1: STEEL TANKS |
DIN EN 16090:2012-02 | COPPER AND COPPER ALLOYS - ESTIMATION OF AVERAGE GRAIN SIZE BY ULTRASOUND |
NF EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
PREN 13941 : DRAFT 2009 | DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
BS EN 583-6:2008 | Non-destructive testing. Ultrasonic examination Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
I.S. EN 583-6:2008 | NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - PART 6: TIMEOF- FLIGHT DIFFRACTION TECHNIQUE AS A METHOD FOR DETECTION AND SIZING OF DISCONTINUITIES |
PREN 12680-1 : DRAFT 2000 | FOUNDING - ULTRASONIC INSPECTION - PART 1: STEEL CASTING FOR GENERAL PURPOSES |
S.R. CR 13935:2000 | NON-DESTRUCTIVE TESTING - GENERIC NDE DATA FORMAT MODEL |
NF EN 16090 : 2012 | COPPER AND COPPER ALLOYS - ESTIMATION OF AVERAGE GRAIN SIZE BY ULTRASOUND |
PREN 1559-2 : DRAFT 2012 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
ISO 13588:2012 | Non-destructive testing of welds Ultrasonic testing Use of automated phased array technology |
DIN EN 1968:2005-12 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF SEAMLESS STEEL GAS CYLINDERS |
BS EN 12680-3:2011 | Founding. Ultrasonic testing Spheroidal graphite cast iron castings |
EN ISO 10863:2011 | Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2011) |
I.S. EN 1802:2002 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS |
I.S. EN 489:2009 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - JOINT ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
UNE-EN 16090:2012 | Copper and copper alloys - Estimation of average grain size by ultrasound |
EN 1968:2002/A1:2005 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF SEAMLESS STEEL GAS CYLINDERS |
UNI EN 489 : 2009 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - JOINT ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
UNI EN 13941 : 2011 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
UNI EN 12680-3 : 2012 | FOUNDING - ULTRASONIC TESTING - PART 3: SPHEROIDAL GRAPHITE CAST IRON CASTINGS |
UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
EN 583-5:2000/A1:2003 | NON DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - PART 5: CHARACTERIZATION AND SIZING OF DISCONTINUITIES |
UNI EN 1559-3 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 3: ADDITIONAL REQUIREMENTS FOR IRON CASTINGS |
I.S. EN ISO 10863:2011 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - USE OF TIME-OF-FLIGHT DIFFRACTION TECHNIQUE (TOFD) (ISO 10863:2011) |
DIN EN ISO 10863:2011-12 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - USE OF TIME-OF-FLIGHT DIFFRACTION TECHNIQUE (TOFD) (ISO 10863:2011) |
13/30287824 DC : 0 | BS EN 16668 - INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
UNI EN ISO 10863 : 2012 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - USE OF TIME-OF-FLIGHT DIFFRACTION TECHNIQUE (TOFD) |
14/30301152 DC : 0 | BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
12/30266615 DC : 0 | BS EN 1559-2 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
DD ENV 583-6:2000 | Non-destructive testing. Ultrasonic examination Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
13/30276940 DC : 0 | BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
DIN EN ISO 13588:2013-02 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - USE OF AUTOMATED PHASED ARRAY TECHNOLOGY (ISO 13588:2012) |
UNE-EN ISO 10863:2012 | Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2011) |
I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
UNI CEN ISO/TR 25107 : 2012 | NON-DESTRUCTIVE TESTING - GUIDELINES FOR NDT TRAINING SYLLABUSES |
ISO/TR 25107:2006 | Non-destructive testing Guidelines for NDT training syllabuses |
UNI EN ISO 13588 : 2013 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - USE OF AUTOMATED PHASED ARRAY TECHNOLOGY |
DIN EN 489:2009-07 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German and English version EN 489:2009 |
UNE-EN 1559-3:2012 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
BS EN 12680-1:2003 | Founding. Ultrasonic examination Steel castings for general purposes |
BS EN 12680-2:2003 | Founding. Ultrasonic examination Steel castings for highly stressed components |
ISO 10863:2011 | Non-destructive testing of welds Ultrasonic testing Use of time-of-flight diffraction technique (TOFD) |
BS EN 13100-3:2004 | Non-destructive testing of welded joints in thermoplastics semi-finished products Ultrasonic testing |
BS EN 13941 : 2009 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
BS EN 1802:2002 | Transportable gas cylinders. Periodic inspection and testing of seamless aluminium alloy gas cylinders |
EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
EN 489:2009 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
EN 13941:2009+A1:2010 | Design and installation of preinsulated bonded pipe systems for district heating |
EN 12799:2000/A1:2003 | BRAZING - NON-DESTRUCTIVE EXAMINATION OF BRAZED JOINTS |
EN 1802:2002 | Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders |
EN 16090:2011 | Copper and copper alloys - Estimation of average grain size by ultrasound |
EN 583-4:2002/A1:2003 | NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - PART 4: EXAMINATION FOR DISCONTINUITIES PERPENDICULAR TO THE SURFACE |
EN 583-3:1997 | Non-destructive testing - Ultrasonic examination - Part 3: Transmission technique |
EN 583-6:2008 | Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
UNE-EN 583-6:2010 | Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
BS EN ISO 10863:2011 | Non-destructive testing of welds. Ultrasonic testing. Use of time-of-flight diffraction technique (TOFD) |
PD CR 13935:2000 | Non-destructive testing. Generic NDE data format model |
09/30187580 DC : DRAFT SEP 2009 | BS EN ISO 10863 - WELDING - USE OF TIME-OF-FLIGHT DIFFRACTION TECHNIQUE (TOFD) FOR TESTING OF WELDS |
BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
PREN 12680-3 : DRAFT 2010 | FOUNDING - ULTRASONIC EXAMINATION - PART 3: SPHEROIDAL GRAPHITE CAST IRON CASTINGS |
ISO 4992-2:2006 | Steel castings Ultrasonic examination Part 2: Steel castings for highly stressed components |
I.S. CEN ISO TR 25107:2006 | NON-DESTRUCTIVE TESTING - GUIDELINES FOR NDT TRAINING SYLLABUSES |
NF EN ISO 17640 : 2011 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TECHNIQUES, TESTING LEVELS AND ASSESSMENT |
ISO 6406:2005 | Gas cylinders Seamless steel gas cylinders Periodic inspection and testing |
BS EN 12799:2000 | Brazing. Non-destructive examination of brazed joints |
BS EN 583-3:1997 | Non-destructive testing. Ultrasonic examination Transmission technique |
BS EN 1559-3:2011 | Founding. Technical conditions of delivery Additional requirements for iron castings |
CR 13935:2000 | Non-destructive testing - Generic NDE data format model |
DIN EN 12680-1:2003-06 | Founding - Ultrasonic examination - Part 1: Steel castings for general purposes; German version EN 12680-1:2003 |
DIN EN 489:2003-05 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - JOINT ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
PREN 12668-2 : DRAFT 1998 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 2: PROBES |
EN 27963 : 1992 | SPECIFICATION FOR CALIBRATION BLOCK NO. 2 FOR ULTRASONIC EXAMINATION OF WELDS |
EN 583-3:1997 | Non-destructive testing - Ultrasonic examination - Part 3: Transmission technique |
EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
PREN 12668-3 : DRAFT 2013 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 3: COMBINED EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.