• There are no items in your cart

EN 755-3:2008

Current
Current

The latest, up-to-date edition.

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form
Published date

03-19-2008

Foreword
1 Scope
2 Alloy groups
3 Tolerances on dimensions
  3.1 Diameter
  3.2 Length
  3.3 Squareness of cut ends
4 Tolerances on form
  4.1 Ovality
  4.2 Straightness
Bibliography

This European Standard specifies an electrolytic method for the determination of the copper content ofunalloyed copper materials with a copper content higher than 99,80 % (mass fraction) in the form ofunwrought, wrought and cast products.Silver, if present, is co-deposited and is reported as copper. Approximately one-half of any selenium andtellurium present will co-deposit. Bismuth, if present, also interferes.

Committee
CEN/TC 132
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
NF EN 755-3 : 2008 Identical
NBN EN 755-3 : 2008 Identical
NEN EN 755-3 : 2008 Identical
NS EN 755-3 : 2ED 2008 Identical
UNE-EN 755-3:2009 Identical
PN EN 755-3 : 2010 Identical
I.S. EN 755-3:2008 Identical
UNI EN 755-3 : 2008 Identical
DIN EN 755-3:2008-06 Identical
BS EN 755-3:2008 Identical
SN EN 755-3 : 2008 Identical

UNE-EN 13195:2014 Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)
I.S. EN 1999-1-1:2007 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES (INCLUDING IRISH NATIONAL ANNEX)
DIN EN 13195:2013-12 ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
PREN 12392 : DRAFT 2014 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
DD ENV 1999-1.1 : DRAFT DEC 2000 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 101: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS
98/105109 DC : DRAFT JUNE 1998 PREN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: DURABILITY AND EVALUATION OF CONFORMITY
ONORM EN 1090-3 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
DIN EN 1090-3:2008-09 EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES
BS EN 1090-3:2008 Execution of steel structures and aluminium structures Technical requirements for aluminium structures
DIN EN 13981-1:2003-11 ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 1: EXTRUDED PRODUCTS
EN 13195:2013 Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)
EN 13195-1 : 2002 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS
EN 12392:2016 Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
09/30202316 DC : 0 BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
PREN 1090-3 : DRAFT 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
UNI EN 13195 : 2013 ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
BS EN 1999-1-1 : 2007 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
DIN EN 755-1:2016-10 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 15088 E : 2006 ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
I.S. EN 570:2007 ALUMINIUM AND ALUMINIUM ALLOYS - IMPACT EXTRUSION SLUGS OBTAINED FROM WROUGHT PRODUCTS - SPECIFICATIONS
I.S. EN 12392:2016 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
I.S. EN 13195-1:2002 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODU- PART 1: SPECIFICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
I.S. EN 755-1:2016 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 1999-1-1:2014-03 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
17/30348210 DC : 0 BS ISO 19426-3 - STRUCTURES FOR MINE SHAFTS - PART 3: SINKING STAGES
06/30136187 DC : 0 EN 755-1 - ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
05/30133060 DC : 0 EN 1090-3 - EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES
17/30348213 DC : 0 BS ISO 19426-4 - STRUCTURES FOR MINE SHAFTS - PART 4: CONVEYANCES
I.S. EN 1090-3:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
EN 1090-3:2008 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
DIN EN 12392:2016-08 Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
DIN EN 573-5:2007-11 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products
UNE-EN 755-1:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
BS EN 13195-1:2002 Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore) Specifications
EN 1999-1-1:2007/A2:2013 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
UNI EN 755-1 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
UNI EN 1090-3 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
UNI EN 1999-1-1 : 2014 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
I.S. EN 13195:2013 ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
14/30301152 DC : 0 BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
ISO 19426-3:2018 Structures for mine shafts — Part 3: Sinking stages
ISO 19426-4:2018 Structures for mine shafts — Part 4: Conveyances
17/30348949 DC : 0 BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
I.S. ENV 1999-1-1:1998 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS
BS EN 12392:2016 Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment
BS EN 755-1:2016 Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Technical conditions for inspection and delivery
DIN EN 15088:2016-09 (Draft) Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German and English version prEN 15088:2016
BS EN 15088:2005 Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery
EN 755-1:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
EN 15088:2005 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
EN 13981-1:2003 Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products
EN 570:2007 Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification
EN 573-5:2007 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products
ENV 1999-1-1 : 1998 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS
BS EN 13195:2013 Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)
04/30125694 DC : DRAFT NOV 2004 EN 15088 - ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
UNE-EN 1090-3:2011 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
BS EN 13981-1:2003 Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Extruded products
BS EN 573-5:2007 Aluminium and aluminium alloys. Chemical composition and form of wrought products Codification of standardized wrought products
BS EN 570:2007 Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specification
DIN EN 13195-1:2002-11 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS
DIN EN 15088:2006-03 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German version EN 15088:2005
DIN EN 570:2007-04 Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification

EN 515:2017 Aluminium and aluminium alloys - Wrought products - Temper designations

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.