EN 923 : 2015 COR 2016
Withdrawn
Withdrawn
ADHESIVES - TERMS AND DEFINITIONS
Published date
01-12-2013
Publisher
Withdrawn date
04-20-2022
Sorry this product is not available in your region.
European foreword
Introduction
1 Scope
2 Terms and definitions
Annex A (informative) - Adhesives
Annex B (informative) - Adhesive joints
Alphabetical index
Gives terms used in the adhesive industry and terms relating to adhesives in those industries that use adhesives.
| Committee |
TC 193
|
| DevelopmentNote |
Supersedes PREN 923. (01/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| I.S. EN 923:2015 | Identical |
| NS EN 923 : 2005 | Identical |
| NEN EN 923 : 2016 | Identical |
| NF EN 923 : 2016 | Identical |
| BS EN 923:2015 | Identical |
| NBN EN 923 : 2016 | Identical |
| PN EN 923 : 2016 | Identical |
| DIN EN 923:2016-03 | Identical |
| DS EN 923 : 2015 | Identical |
| UNE-EN 923:2016 | Identical |
| BS ISO 16245:2009 | Information and documentation. Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents |
| DIN EN 15425:2015-06 (Draft) | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 15/30329437 DC : 0 | BS EN 12704 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
| PREN 14869-1 : DRAFT 2010 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| BS EN 16556:2014 | Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications |
| 05/30132008 DC : DRAFT APR 2005 | BS EN 13999-1 - ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| BS ISO 16525-1:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives General test methods |
| I.S. EN 1967:2002 | STRUCTURAL ADHESIVES - EVALUATION OF THE EFFECTIVENESS OF SURFACE TREATMENT TECHNIQUES FOR ALUMINIUM USING A WET PEEL TEST IN ASSOCIATION WITH THE FLOATING ROLLER METHOD |
| PD CEN/TR 14548:2003 | Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
| PREN 1372 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| 10/30231817 DC : 0 | BS EN 12705 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
| 10/30231826 DC : 0 | BS EN 14869-2 - STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| 06/30155808 DC : DRAFT SEP 2006 | BS EN 13999-4 - ADHESIVES - SHORT-TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 4: DETERMINATION OF VOLATILE DIISOCYANATES |
| DIN ISO 16245:2012-05 | Information and documentation - Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents (ISO 16245:2009) |
| 11/30253733 DC : 0 | BS EN 301 - ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 02/121758 DC : DRAFT APR 2002 | BS EN ISO 9311-3 - ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 3: TEST METHOD FOR THE DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE |
| 15/30296765 DC : 0 | BS EN 15425 - ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 10/30231838 DC : DRAFT SEP 2010 | BS EN 1965-1 - STRUCTURAL ADHESIVES - CORROSION - PART 1: DETERMINATION AND CLASSIFICATION OF CORROSION TO A COPPER SUBSTRATE |
| 14/30296756 DC : 0 | BS EN 1902 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - SHEAR CREEP TEST |
| 03/306598 DC : DRAFT APR 2003 | EN 14680 - ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
| 09/30206195 DC : 0 | BS EN ISO 9311-2 - ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 2: DETERMINATION OF SHEAR STRENGTH |
| 12/30248096 DC : 0 | BS ISO 17178 - ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
| 15/30317333 DC : 0 | BS EN 205 - ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
| PREN 2642 : 200P1 | AEROSPACE SERIES - STRUCTURAL ADHESIVE SYSTEMS - ADHESIVE FILM - TECHNICAL SPECIFICATION |
| I.S. CR 14376:2002 | ADHESIVES - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DESCRIPTION AND ASSESSMENT OF THE SETTING PROCESS |
| PREN 1373 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| I.S. EN 301:2017 | ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| CEN/TR 16953:2017 | Medical gloves for single use - Guidance for selection |
| DIN EN 13999-1:2014-03 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure |
| DIN EN 13415:2010-05 | TEST OF ADHESIVE FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| BS EN 14869-2:2011 | Structural adhesives. Determination of shear behaviour of structural bonds Thick adherends shear test |
| BS EN 827:2005 | Adhesives. Determination of conventional solids content and constant mass solids content |
| BS EN 1965-2:2011 | Structural adhesives. Corrosion Determination and classification of corrosion to a brass substrate |
| BS EN 1246:1998 | Adhesives. Determination of ash and sulfated ash |
| BS EN 12703:2012 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature |
| BS EN ISO 14678:2005 | Adhesives. Determination of resistance to flow (sagging) |
| BS EN 14258:2004 | Structural adhesives. Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature |
| BS EN 14713:2005 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of friction properties of films potentially suitable for bonding |
| BS EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Determination of minimum pressing time under referenced conditions |
| BS EN 543:2003 | Adhesives. Determination of apparent density of powder and granule adhesives |
| BS EN ISO 9311-1:2005 | Adhesives for thermoplastics piping systems Determination of film properties |
| BS EN 1067:2005 | Adhesives. Examination and preparation of samples for testing |
| BS EN 1895:2001 | Adhesives for paper and board, packaging and disposable sanitary products. 180°. \'T\' peel test for a flexible-to-flexible assembly |
| DIN EN 1967:2003-02 | STRUCTURAL ADHESIVES - EVALUATION OF THE EFFECTIVENESS OF SURFACE TREATMENT TECHNIQUES FOR ALUMINIUM USING A WET PEEL TEST IN ASSOCIATION WITH THE FLOATING ROLLER METHOD |
| I.S. EN 13999-4:2007 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 4: DETERMINATION OF VOLATILE DIISOCYANATES |
| DIN EN 1245:2011-07 | Adhesives - Determination of pH |
| EN 13415:2010 | Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites |
| DIN EN 14173:2002-04 | STRUCTURAL ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
| EN 12705:2011 | Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration |
| DIN EN 15062:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| CEN/TS 14999:2013 | Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container |
| EN 12704:2016 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives |
| EN 1243:2011 | Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates |
| EN 1246:1998 | Adhesives - Determination of ash and sulphated ash |
| DIN EN 12092:2002-02 | ADHESIVES - DETERMINATION OF VISCOSITY |
| EN 12436:2001 | Adhesives for load-bearing timber structures - Casein adhesives - Classification and performance requirements |
| EN 1241:1998 | Adhesives - Determination of acid value |
| EN 1238:2011 | Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball) |
| EN 12963:2001 | Adhesives - Determination of free monomer content in adhesives based on synthetic polymers |
| DIN EN 14258:2005-02 | Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature |
| EN 1239:2011 | Adhesives - Freeze-thaw stability |
| EN 12962:2011 | Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index) |
| EN 1245:2011 | Adhesives - Determination of pH |
| EN 50050:2006 | Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment |
| EN 1242:2013 | Adhesives - Determination of isocyanate content |
| PREN 302-6 : DRAFT 2011 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| PREN 1238 : DRAFT 2010 | ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL) |
| 05/19992419 DC : DRAFT MAY 2005 | BS EN 14256 - ADHESIVES FOR NON-STRUCTURAL WOOD APPLICATIONS - TEST METHOD AND REQUIREMENTS FOR RESISTANCE TO STATIC LOAD |
| DIN 8063-10:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 10: WALL BRACKET ELBOWS - DIMENSIONS |
| 12/30259191 DC : DRAFT JULY 2012 | BS EN 1242 - ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
| 05/30131014 DC : DRAFT MAR 2005 | EN 15190 - STRUCTURAL ADHESIVES - TEST METHODS FOR ASSESSING LONG TERM DURABILITY OF BONDED METALLIC STRUCTURES |
| PREN 15416-5 : DRAFT 2015 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| DIN EN 16556:2015-01 | DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| 11/30247568 DC : 0 | BS EN 12703 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
| ISO 19209:2017 | Adhesives — Classification of thermoplastic wood adhesives for non-structural applications |
| PREN 15416-3 : DRAFT 2015 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
| BS ISO 19210:2017 | Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints |
| 06/30155802 DC : DRAFT SEP 2006 | BS EN 13999-2 - ADHESIVES - SHORT-TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 2: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS |
| 15/30296768 DC : 0 | BS EN 15416-3 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
| 15/30329434 DC : 0 | BS EN 12703 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
| 11/30245850 DC : 0 | BS EN 302-7 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 7: DETERMINATION OF THE WORKING LIFE UNDER REFERENCED CONDITIONS |
| 05/30135769 DC : DRAFT JUL 2005 | EN 15274 - GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| 14/30296759 DC : 0 | BS EN 1903 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| 10/30231832 DC : 0 | BS EN 14869-1 - STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| CR 14376:2002 | Adhesives - Adhesives for paper and board, packaging and disposable sanitary products - Description and assessment of the setting process |
| 08/30180281 DC : DRAFT JUNE 2008 | BS EN 1966 - STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| 11/30247565 DC : 0 | BS EN 12704 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
| PREN 15416-4 : DRAFT 2015 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| BS EN 15425:2017 | Adhesives. One component polyurethane (PUR) for load-bearing timber structures. Classification and performance requirements |
| 15/30293506 DC : 0 | BS EN 14814 - ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| PREN 15275 : DRAFT 2014 | STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
| 04/30123591 DC : DRAFT OCT 2004 | EN 15062 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
| PREN 14814 : DRAFT 2015 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| ISO 17212:2012 | Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding |
| I.S. ENV 302-5:2002 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 5: DETERMINATION OF THE CONVENTIONAL ASSEMBLY TIME |
| I.S. EN 50050:2006 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT |
| I.S. EN 15416-1:2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASS HOUSE TEST) |
| BS EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements |
| PD CEN/TR 16953:2017 | Medical gloves for single use. Guidance for selection |
| PREN 302-7 : DRAFT 2011 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 7: DETERMINATION OF THE WORKING LIFE UNDER REFERENCED CONDITIONS |
| DIN EN 1392:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions |
| DIN EN 1242:2013-05 | ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
| DIN EN 13999-2:2014-03 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds |
| DIN EN 12962:2011-07 | Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index) |
| DIN EN 1464:2010-06 | Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method |
| DIN EN 12705:2011-08 | Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration |
| DIN EN 12704:2016-10 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
| DIN EN 1243:2011-07 | Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates |
| DIN EN 302-1:2013-06 | Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
| DIN EN 14814:2008-03 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| DIN EN 15416-5:2015-06 (Draft) | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| DIN EN ISO 9311-3:2005-06 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 3: TEST METHOD FOR THE DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE |
| DIN EN 14294:2010-06 | Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
| DIN EN 14713:2016-10 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FRICTION PROPERTIES OF FILMS POTENTIALLY SUITABLE FOR BONDING |
| DIN EN 15416-4:2015-06 (Draft) | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| BS EN 1238:1999 | Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball) |
| BS EN 14259:2003 | Adhesives for floor covering. Requirements for mechanical and electrical performance |
| BS EN 14814:2016 | Adhesives for thermoplastic piping systems for fluids under pressure. Specifications |
| BS EN 1902:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Shear creep test |
| BS EN 828:2013 | Adhesives. Wettability. Determination by measurement of contact angle and surface free energy of solid surface |
| BS EN 13999-3 : 2007 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 3: DETERMINATION OF VOLATILE ALDEHYDES |
| DIN EN 15274:2015-06 | GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| BS EN 1244:1998 | Adhesives. Determination of the colour and/or colour changes of adhesive coats under the influence of light |
| BS EN 15307:2014 | Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements |
| BS EN 1720:1999 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of dispersability |
| BS EN 1967:2002 | Structural adhesives. Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method |
| I.S. EN 827:2006 | ADHESIVES - DETERMINATION OF CONVENTIONAL SOLIDS CONTENT AND CONSTANT MASS SOLIDS CONTENT |
| I.S. EN 1242:2013 | ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
| DIN EN 1902:2015-07 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
| I.S. EN 828:2013 | ADHESIVES - WETTABILITY - DETERMINATION BY MEASUREMENT OF CONTACT ANGLE AND SURFACE FREE ENERGY OF SOLID SURFACE |
| I.S. EN 12704:2016 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
| I.S. EN 205:2016 | ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
| DIN EN 1240:2011-07 | Adhesives - Determination of hydroxyl value and/or hydroxyl content |
| I.S. EN 302-7:2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART PART 7: DETERMINATION OF THE WORKING LIFE UNDER REFERENCED CONDITIONS |
| I.S. EN 14259:2004 | ADHESIVES FOR FLOOR COVERINGS - REQUIREMENTS FOR MECHANICAL AND ELECTRICAL PERFORMANCE |
| I.S. EN 1238:2011 | ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL) |
| EN 14259:2003 | Adhesives for floor coverings - Requirements for mechanical and electrical performance |
| I.S. EN 1239:2011 | ADHESIVES - FREEZE-THAW STABILITY |
| I.S. EN 13999-2:2013 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 2: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS |
| I.S. EN 1240:2011 | ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
| I.S. EN 1067:2006 | ADHESIVES - EXAMINATION AND PREPARATION OF SAMPLES FOR TESTING |
| I.S. EN 12962:2011 | ADHESIVES - DETERMINATION OF ELASTIC BEHAVIOUR OF LIQUID ADHESIVES (ELASTICITY INDEX) |
| I.S. EN 302-1:2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
| I.S. EN 1965-2:2011 | STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE |
| DIN EN 1239:2011-07 | Adhesives - Freeze-thaw stability |
| DIN EN 1903:2015-07 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| I.S. EN 1392:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIED CONDITIONS |
| I.S. EN 15307:2014 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| I.S. EN 14680:2015 | ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
| I.S. EN ISO 9311-2:2011 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 2: DETERMINATION OF SHEAR STRENGTH |
| I.S. EN 1464:2010 | ADHESIVES - DETERMINATION OF PEEL RESISTANCE OF ADHESIVE BONDS - FLOATING ROLLER METHOD |
| I.S. EN 14869-1:2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| I.S. EN 1965-1:2011 | STRUCTURAL ADHESIVES - CORROSION - PART 1: DETERMINATION AND CLASSIFICATION OF CORROSION TO A COPPER SUBSTRATE |
| I.S. EN 14869-2:2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| I.S. EN 15416-4:2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME FOR ONE COMPONENT POLYURETHANE ADHESIVES |
| I.S. EN 1966:2009 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| S.R. CEN TS 14472-1:2003 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - DESIGN, PREPARATION AND INSTALLATION - PART 1: GENERAL |
| I.S. EN 14294:2010 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES |
| I.S. EN 12765:2016 | CLASSIFICATION OF THERMOSETTING WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| I.S. EN 13999-1:2013 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| I.S. EN 14814:2016 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| I.S. EN 13999-3:2007 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 3: DETERMINATION OF VOLATILE ALDEHYDES |
| I.S. EN 14293:2006 | ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
| I.S. EN 302-6:2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| I.S. EN 1245:2011 | ADHESIVES - DETERMINATION OF PH |
| I.S. EN 12703:2016 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
| I.S. EN 15274:2015 | GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1902:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
| I.S. EN 14713:2016 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FRICTION PROPERTIES OF FILMS POTENTIALLY SUITABLE FOR BONDING |
| I.S. EN 12705:2011 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
| I.S. EN 542:2003 | ADHESIVES - DETERMINATION OF DENSITY |
| I.S. EN 15416-5:2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF CONVENTIONAL PRESSING TIME |
| I.S. EN 15275:2015 | STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
| I.S. EN 1243:2011 | ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
| DIN EN 15416-1:2017-05 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house test) |
| DIN EN 15416-4:2017-05 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions |
| DIN EN 15416-5:2017-05 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
| 15/30317330 DC : 0 | BS EN 204 - CLASSIFICATION OF THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| BS EN 16254 : 2013 | ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| BS EN 15416-1:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house test) |
| ISO 19210:2017 | Adhesives — Wood adhesives for non-structural applications — Determination of tensile shear strength of lap joints |
| PREN 12703 : DRAFT 2015 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
| 14/30300568 DC : 0 | BS EN 15274 - GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| 03/306131 DC : DRAFT APR 2003 | EN 1067 - ADHESIVES - EXAMINATION AND PREPARATION OF SAMPLES FOR TESTING |
| 05/30142457 DC : 0 | BS EN 15416-1 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: STATIC LOAD TEST OF SINGLE BONDLINE SPECIMENS IN COMPRESSION SHEAR |
| 14/30296753 DC : 0 | BS EN 1372 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| 04/30123559 DC : DRAFT OCT 2004 | EN 1392 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIC CONDITIONS |
| 03/306130 DC : DRAFT APR 2003 | EN 827 - ADHESIVES - DETERMINATION OF CONVENTIONAL SOLIDS CONTENT AND CONSTANT MASS SOLIDS CONTENT |
| 16/30315352 DC : 0 | BS ISO 19210 - ADHESIVES - THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
| 15/30326222 DC : 0 | BS EN 301 - ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| DIN EN 302-5:2013-06 | Adhesives for load-bearing structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions |
| 07/30160818 DC : 0 | BS EN 302-5 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 5: DETERMINATION OF THE CONVENTIONAL ASSEMBLY TIME |
| 10/30231811 DC : DRAFT SEP 2010 | BS EN 1245 - ADHESIVES - DETERMINATION OF PH |
| 10/30231808 DC : 0 | BS EN 1243 - ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
| DD ENV 13999-1:2001 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application General procedure |
| BS ISO 16525-2:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of electrical characteristics for use in electronic assemblies |
| 04/30087608 DC : DRAFT OCT 2004 | BS 6100-7 - BUILDING AND CIVIL ENGINEERING - VOCABULARY - PART 7: CONSTRUCTION PARTS |
| 13/30281051 DC : 0 | BS EN 14680 - ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
| PREN 12704 : DRAFT 2015 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
| 14/30293503 DC : 0 | BS EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| PD CEN ISO/TR 16178:2012 | Footwear. Critical substances potentially present in footwear and footwear components |
| 14/30300565 DC : 0 | BS EN 15275 - STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
| 03/314567 DC : DRAFT OCT 2003 | BS EN 14814 - ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| S.R. CEN ISO/TR 16178:2012 | FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS (ISO/TR 16178:2012) |
| I.S. EN 16254:2013 | ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| I.S. EN 302-8:2017 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 8: STATIC LOAD TEST OF MULTIPLE BOND LINE SPECIMENS IN COMPRESSION SHEAR |
| I.S. EN 302-5:2013 | ADHESIVES FOR LOAD-BEARING STRUCTURES - TEST METHODS - PART 5: DETERMINATION OF MAXIMUM ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| S.R. CEN/TS 14999:2013 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - ACCELERATED AGEING TEST IN STORAGE CONTAINER |
| PREN 1240 : DRAFT 2010 | ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
| I.S. EN 15425:2017 | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| NF EN 13415 : 2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| DIN EN 1372:2015-06 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| DIN EN 1238:2011-07 | Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball) |
| DIN EN 1373:2015-06 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| DIN EN 1966:2009-07 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| DIN EN 12703:2016-10 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
| DIN EN ISO 9311-2:2011-12 | Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011) |
| DIN EN ISO 14678:2005-11 | Adhesives - Determination of resistance to flow (sagging) (ISO 14678:2005) |
| DIN EN 302-6:2013-06 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
| DIN EN 14869-1:2011-07 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| DIN EN 14680:2015-12 | ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
| BS EN 14869-1:2011 | Structural adhesives. Determination of shear behaviour of structural bonds Torsion test method using butt-bonded hollow cylinders |
| BS EN 1392:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions |
| BS EN 542:2003 | Adhesives. Determination of density |
| BS EN 302-1:2013 | Adhesives for load-bearing timber structures. Test methods Determination of longitudinal tensile shear strength |
| BS EN 1965-1:2011 | Structural adhesives. Corrosion Determination and classification of corrosion to a copper substrate |
| BS EN 13999-2:2013 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application Determination of volatile organic compounds |
| BS EN 12964:2001 | Adhesives for leather and footwear materials. Lasting adhesives. Testing heat resistance of bonds at increasing temperature |
| BS EN 14680:2015 | Adhesives for non-pressure thermoplastics piping systems. Specifications |
| DIN EN 15416-3:2010-06 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
| I.S. EN 1841:1999 | ADHESIVES - TEST METHODS FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES OF A LINOLEUM FLOOR COVERING IN CONTACT WITH AN ADHESIVE |
| EN 1719:1998 | Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack |
| EN 14022:2010 | Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives |
| EN 14493 : 2002 | STRUCTURAL ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
| EN 13999-1:2013 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure |
| 12/30259194 DC : 0 | BS EN 13999-1 - ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| S.R. CEN/TR 16953:2017 | MEDICAL GLOVES FOR SINGLE USE - GUIDANCE FOR SELECTION |
| ISO 16245:2009 | Information and documentation — Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents |
| DIN EN 15416-5 E : 2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| DIN EN 15416-1 E : 2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASS HOUSE TEST) |
| 13/30259197 DC : 0 | BS EN 16556 - ADHESIVES - DETERMINATION OF THE OPEN ASSEMBLY TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| I.S. EN 15062:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
| I.S. EN 14022:2010 | STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTI-COMPONENT ADHESIVES |
| BS EN 302-8:2017 | Adhesives for load-bearing timber structures. Test methods Static load test of multiple bond line specimens in compression shear |
| 16/30315349 DC : 0 | BS ISO 19209 - CLASSIFICATION OF THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| 05/30142460 DC : 0 | BS EN 15416-2 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES - TEST METHODS - PART 2: STATIC LOAD TEST OF MULTIPLE BONDLINE SPECIMENS IN COMPRESSION SHEAR |
| PREN 14869-2 : DRAFT 2010 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| 14/30296750 DC : 0 | BS EN 1373 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| PREN 13999-1 : DRAFT 2012 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| 05/30135775 DC : DRAFT JUL 2005 | EN 15275 - STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
| BS ISO 19209:2017 | Adhesives. Classification of thermoplastic wood adhesives for non-structural applications |
| 10/30231805 DC : 0 | BS EN 1240 - ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
| 08/30193485 DC : 0 | BS ISO 17212 - STRUCTURAL ADHESIVES- GUIDELINES FOR THE SURFACE PREPARATION OF METALS AND PLASTICS PRIOR TO ADHESIVE BONDING |
| PD CEN/TS 14999:2013 | Adhesives for thermoplastic piping systems. Accelerated ageing test in storage container |
| 15/30296771 DC : 0 | BS EN 15416-1 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASSHOUSE TEST) |
| 07/30167352 DC : DRAFT AUG 2007 | BS EN 13415 - TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| 10/30231835 DC : DRAFT SEP 2010 | BS EN 1965-2 - STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE |
| BS EN 302-5:2013 | Adhesives for load-bearing structures. Test methods Determination of maximum assembly time under referenced conditions |
| 15/30296777 DC : 0 | BS EN 15416-4 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| PREN 15274 : DRAFT 2014 | GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| 10/30231814 DC : DRAFT SEP 2010 | BS EN 12962 - ADHESIVES - DETERMINATION OF ELASTIC BEHAVIOUR OF LIQUID ADHESIVES (ELASTICITY INDEX) |
| 03/105232 DC : DRAFT MAR 2003 | BS EN ISO 19952 - FOOTWEAR - VOCABULARY |
| 11/30240279 DC : DRAFT MAR 2011 | BS EN 16254 - ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 12/30259436 DC : DRAFT JULY 2012 | BS EN 13999-2 - ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 2: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS |
| 11/30245847 DC : 0 | BS EN 302-6 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| 05/30131552 DC : DRAFT APR 2005 | EN 1242 - ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
| 10/30231823 DC : DRAFT SEP 2010 | BS EN 1239 - ADHESIVES - FREEZE-THAW STABILITY |
| 15/30296762 DC : 0 | BS EN 15416-5 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| I.S. EN 16556:2014 | DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NONSTRUCTURAL APPLICATIONS |
| PREN 301 : DRAFT 2015 | ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| DIN EN 15416-1:2015-06 (Draft) | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASS HOUSE TEST) |
| I.S. CEN TR 14548:2003 | ADHESIVES - GUIDE TO TEST METHODS AND OTHER STANDARDS FOR THE GENERAL REQUIREMENTS, CHARACTERIZATION AND SAFETY OF STRUCTURAL ADHESIVES |
| ISO 17178:2013 | Adhesives — Adhesives for bonding parquet to subfloor — Test methods and minimum requirements |
| PREN 15307 : DRAFT 2014 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| PREN 15425 : DRAFT 2015 | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| PREN 1903 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| BS EN 50050:2006 | Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment |
| DIN EN 15416-3:2015-06 (Draft) | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
| PREN 12705 : DRAFT 2010 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
| EN 15416-3:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear |
| I.S. EN 15416-3:2017+A1:2019 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
| DIN EN 13999-4:2009-08 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 4: DETERMINATION OF VOLATILE DIISOCYANATES |
| DIN EN 1067:2006-03 | Adhesives - Examination and preparation of samples for testing |
| DIN EN 302-7:2013-06 | Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions |
| DIN EN 14022:2010-06 | STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTICOMPONENT ADHESIVES |
| CEN ISO/TR 16178:2012 | Footwear - Critical substances potentially present in footwear and footwear components (ISO/TR 16178:2012) |
| DIN EN ISO 9311-1:2005-11 | Adhesives for thermoplastic piping systems - Part 1: Determination of film properties (ISO 9311-1:2005) |
| DIN EN 1965-2:2011-07 | Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate |
| DIN EN 1965-1:2011-07 | Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate |
| BS EN 14293:2006 | Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements |
| BS EN 1841:1999 | Adhesives. Test methods for floor coverings and wall coverings. Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
| BS EN 13999-4 : 2007 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 4: DETERMINATION OF VOLATILE DIISOCYANATES |
| BS EN 12960:2001 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of shear resistance |
| ISO 9311-1:2005 | Adhesives for thermoplastic piping systems — Part 1: Determination of film properties |
| BS EN 1241:1998 | Adhesives. Determination of acid value |
| BS EN 1464:2010 | Adhesives. Determination of peel resistance of adhesive bonds. Floating roller method |
| ISO 19952:2005 | Footwear — Vocabulary |
| BS EN ISO 15908:2002 | Adhesives for thermoplastic piping systems. Test method for the determination of thermal stability of adhesives |
| BS EN 1391:1998 | Adhesives for leather and footwear materials. A method for evaluating the bondability of materials. Minimum requirements and material classification |
| BS EN 1239:1998 | Adhesives. Freeze-thaw stability |
| BS EN 15275:2015 | Structural adhesives. Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
| BS EN 15062:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions |
| BS EN 1242:2013 | Adhesives. Determination of isocyanate content |
| BS EN 1903:2015 | Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing |
| DIN EN 15307:2015-04 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| BS EN 1373:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Shear test |
| ISO 9311-3:2005 | Adhesives for thermoplastic piping systems — Part 3: Test method for the determination of resistance to internal pressure |
| BS EN 12961:2001 | Adhesives for leather and footwear materials. Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives |
| BS EN 1896:2001 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of tensile strength and elongation |
| BS EN 14493:2002 | Structural adhesives. Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions. Wedge impact method |
| BS EN 12436:2002 | Adhesives for load-bearing timber structures. Casein adhesives. Classification and performance requirements |
| BS EN 12704:2012 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives |
| BS EN 12963:2001 | Adhesives. Determination of free monomer content in adhesives based on synthetic polymers |
| BS EN 12702:2000 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of blocking behaviour of potentially adhesive layers |
| BS EN 12705:2011 | Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration |
| I.S. EN 1372:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| ISO 14678:2005 | Adhesives — Determination of resistance to flow (sagging) |
| BS EN 522:1998 | Adhesives for leather and footwear materials. Bond strength. Minimum requirements and adhesive classification |
| BS EN 1721:1999 | Adhesives for paper and board, packaging and disposable sanitary products. Tack measurement for pressure sensitive adhesives. Determination of rolling ball tack |
| BS EN 302-7:2013 | Adhesives for load-bearing timber structures. Test methods Determination of the working life under referenced conditions |
| ISO/TR 16178:2012 | Footwear — Critical substances potentially present in footwear and footwear components |
| BS EN 1240:1998 | Adhesives. Determination of hydroxyl value and/or hydroxyl content |
| I.S. EN 13415:2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| ISO 9311-2:2011 | Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength |
| BS EN ISO 19952:2006 | Footwear. Vocabulary |
| BS EN 14256:2007 | Adhesives for non-structural wood applications. Test method and requirements for resistance to static load |
| BS EN 1372:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Peel test |
| BS EN 15416-3:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Creep deformation test at cyclic climate conditions with specimens loaded in bending shear |
| BS EN 1243:1999 | Adhesives. Determination of free formaldehyde in amino and amidoformaldehyde condensates |
| BS EN 14510:2005 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Determination of sole positioning tack (spotting tack) |
| BS EN 1966:2009 | Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method |
| BS EN 1245:1999 | Adhesives. Determination of pH. Test method |
| BS EN 924:2003 | Adhesives. Solvent-borne and solvent-free adhesives. Determination of flashpoint |
| I.S. EN 1373:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| BS EN 12701:2001 | Structural adhesives. Storage. Determination of words and phrases relating to the product life of structural adhesives and related materials |
| BS EN 14173:2002 | Structural adhesives. T-peel test for flexible-to-flexible bonded assemblies |
| I.S. EN 1903:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| BS EN 302-6:2013 | Adhesives for load-bearing timber structures. Test methods Determination of the minimum pressing time under referenced conditions |
| BS EN 14292:2005 | Adhesives. Wood adhesives. Determination of static load resistance with increasing temperature |
| DIN EN 15275:2015-06 | STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
| BS EN 12962:2001 | Adhesives. Determination of elastic behaviour of liquid adhesives (elasticity index) |
| EN 14713:2016 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding |
| EN 13999-3:2007+A1:2009 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes |
| EN 522 : 1998 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - BOND STRENGTH - MINIMUM REQUIREMENTS AND ADHESIVE CLASSIFICATION |
| EN 542:2003 | Adhesives - Determination of density |
| EN 15190:2007 | Structural adhesives - Test methods for assessing long term durability of bonded metallic structures |
| EN 14869-1:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| EN 14510:2005 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
| EN 14292:2005 | Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature |
| EN 15416-1:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house test) |
| EN 12092:2001 | Adhesives - Determination of viscosity |
| EN 1965-1:2011 | Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate |
| EN 14294:2010 | Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
| EN 1896:2001 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation |
| EN 1464:2010 | Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method |
| EN 14814:2016 | Adhesives for thermoplastic piping systems for fluids under pressure - Specifications |
| EN ISO 14678:2005 | Adhesives - Determination of resistance to flow (sagging) (ISO 14678:2005) |
| EN 14869-2:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) |
| EN 1965-2:2011 | Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate |
| EN 16254:2013+A1:2016 | Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements |
| EN 1391 : 1998 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - A METHOD FOR EVALUATING THE BONDABILITY OF MATERIALS - MINIMUM REQUIREMENTS AND MATERIAL CLASSIFICATION |
| EN 543:2003 | Adhesives - Determination of apparent density of powder and granule adhesives |
| EN ISO 19952:2005 | Footwear - Vocabulary (ISO 19952:2005) |
| EN 15062:2006 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
| EN 302-8:2017 | Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear |
| EN 1841:1998 | Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
| EN 14256:2007 | Adhesives for non-structural wood applications - Test method and requirements for resistance to static load |
| EN ISO 9311-3:2005 | Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure (ISO 9311-3:2005) |
| EN 15274:2015 | General purpose adhesives for structural assembly - Requirements and test methods |
| EN ISO 9311-2:2011 | Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011) |
| EN 1372:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Peel test |
| EN 14173 : 2002 | STRUCTURAL ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
| EN 1903:2015 | Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing |
| EN ISO 9311-1:2005 | Adhesives for thermoplastic piping systems - Part 1: Determination of film properties (ISO 9311-1:2005) |
| EN 827:2005 | Adhesives - Determination of conventional solids content and constant mass solids content |
| EN 16556:2014 | Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications |
| EN 1392:2006 | Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions |
| EN 1721:1998 | Adhesives for paper and board, packaging and disposable sanitary products - Track measurement for pressure sensitive adhesives - Determination of rolling ball track |
| EN 924:2003 | Adhesives - Solvent-borne and solvent-free adhesives - Determination of flashpoint |
| EN 14258:2004 | Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature |
| EN 14680:2015 | Adhesives for non-pressure thermoplastics piping systems - Specifications |
| EN 15425:2017 | Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements |
| EN 1373:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear test |
| DIN EN 302-8:2017-05 | Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear |
| EN 1902:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear creep test |
| EN 302-5:2013 | Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions |
| EN 204:2016 | Classification of thermoplastic wood adhesives for non-structural applications |
| EN 205:2016 | Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints |
| EN 302-6:2013 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
| EN 828:2013 | Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface |
| EN 15307:2014 | Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
| EN 13999-4:2007+A1:2009 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates |
| EN 13887:2003 | Structural Adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding |
| EN 302-1:2013 | Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
| EN 13999-2:2013 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds |
| EN 15275:2015 | Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
| EN 1720:1998 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability |
| EN 1966:2009 | Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method |
| EN 14293:2006 | Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements |
| EN ISO 15908:2002 | Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives (ISO 15908:2002) |
| EN 12964:2001 | Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature |
| EN 14257:2006 | Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91) |
| EN 15416-4:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions |
| PREN 14680 : DRAFT 2013 | ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
| PREN 828 : DRAFT 2010 | ADHESIVES - WETTABILITY - DETERMINATION BY MEASUREMENT OF CONTACT ANGLE AND SURFACE FREE ENERGY OF SOLID SURFACE |
| 10/30231820 DC : 0 | BS EN 1238 - ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL) |
| I.S. EN 14493:2002 | STRUCTURAL ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
| PREN 1902 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - SHEAR CREEP TEST |
| DD ENV 302-5:2002 | Adhesives for load-bearing timber structures. Test tethods Determination of the conventional assembly time |
| BS ISO 17178:2013 | Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements |
| 05/30136487 DC : DRAFT JUL 2005 | EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| PREN 12765 : DRAFT 2015 | CLASSIFICATION OF THERMOSETTING WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| 15/30296774 DC : 0 | BS EN 302-8 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 8: STATIC LOAD TEST OF MULTIPLE BOND LINE SPECIMENS IN COMPRESSION SHEAR |
| 10/30231829 DC : 0 | BS EN 828 - ADHESIVES - WETTABILITY - DETERMINATION BY MEASUREMENT OF CONTACT ANGLE AND SURFACE FREE ENERGY OF SOLID SURFACE |
| DIN EN 302-8 E : 2017 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 8: STATIC LOAD TEST OF MULTIPLE BOND LINE SPECIMENS IN COMPRESSION SHEAR |
| 15/30317336 DC : 0 | BS EN 12765 - CLASSIFICATION OF THERMOSETTING WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| DIN EN 15416-4 E : 2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| 06/30145736 DC : 0 | EN 15416-3 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENTS LOADED IN BENDING SHEAR |
| PD CR 14376:2002 | Adhesives. Ahesives for paper and board, packaging and disposable sanitary products. Description and assessment of the setting process |
| PREN 204 : DRAFT 2015 | CLASSIFICATION OF THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| PREN 1243 : DRAFT 2010 | ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
| ONORM EN 14257 : 2006 | ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
| NFL 17 021 : 98 PR | AEROSPACE SERIES - NON-METALLIC MATERIALS - RESINS, ADHESIVES, REINFORCED PLASTICS, PREIMPREGNATES - CHARACTERISATION BY LIQUID CHROMATOGRAPHY |
| DIN EN 302-8:2015-06 (Draft) | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 8: STATIC LOAD TEST OF MULTIPLE BOND LINE SPECIMENS IN COMPRESSION SHEAR |
| EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| BS EN 14257:2006 | Adhesives. Wood adhesives. Determination of tensile strength of lap joints at elevated temperature (WATT \'91) |
| PREN 205 : DRAFT 2015 | ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
| ISO 16525-2:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 2: Determination of electrical characteristics for use in electronic assemblies |
| I.S. CEN TS 14999:2006 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - ACCELERATED AGEING TEST OF ADHESIVES |
| I.S. EN 14257:2006 | ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
| ISO 16525-1:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 1: General test methods |
| EN 302-7:2013 | Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions |
| BS EN 204:2001 | Classification of thermoplastic wood adhesives for non-structural applications |
| BS EN 13415:2002 | Adhesives. Test of adhesives for floor coverings. Determination of the electrical resistance of adhesive films |
| BS EN 14294:2004 | Adhesives for leather and footwear materials. Preparation of bonded test pieces by moulding-on processes |
| BS EN 15274:2015 | General purpose adhesives for structural assembly. Requirements and test methods |
| BS EN 15416-4:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Determination of open assembly time under referenced conditions |
| BS EN 13887:2003 | Structural adhesives. Guidelines for surface preparation of metals and plastics prior to adhesive bonding |
| BS EN 14022:2003 | Structural adhesives. Determination of the pot life (working life) of multicomponent adhesives |
| ISO 15908:2002 | Adhesives for thermoplastic piping systems — Test method for the determination of thermal stability of adhesives |
| BS EN 12765:2001 | Classification of thermosetting wood adhesives for non-structural applications |
| BS EN 15190:2007 | Structural adhesives. Test methods for assessing long term durability of bonded metallic structures |
| BS EN 12092:2001 | Adhesives. Determination of viscosity |
| BS EN ISO 9311-2:2011 | Adhesives for thermoplastic piping systems Determination of shear strength |
| BS EN 205:2003 | Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints |
| BS EN 1719:1999 | Adhesives for paper and board, packaging and disposable sanitary products. Tack measurement for pressure-sensitive adhesives. Determination of loop tack |
| BS EN ISO 9311-3:2005 | Adhesives for thermoplastic piping systems Test method for the determination of resistance to internal pressure |
| BS EN 13999-1:2013 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application General procedure |
| DIN EN 14292:2005-09 | Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature; German version EN 14292:2005 |
| CEN/TR 14548:2003 | Adhesives - Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
| CEN/TS 14472-1:2003 | Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 1: General |
| DIN EN 827:2006-03 | Adhesives - Determination of conventional solids content and constant mass solids content |
| DIN EN 14257:2006-09 | ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
| DIN EN 14510:2005-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
| EN 12765:2016 | Classification of thermosetting wood adhesives for non-structural applications |
| EN 12701:2001 | Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials |
| EN 12703:2016 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature |
| EN 1240:2011 | Adhesives - Determination of hydroxyl value and/or hydroxyl content |
| EN 12702:2000 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers |
| DIN EN 14869-2:2011-07 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) |
| EN 1244:1998 | Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light |
| DIN EN 14814:2016-09 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| DIN EN 14256:2007-10 | Adhesives for non-structural wood applications - Test method and requirements for resistance to static load |
| DIN EN 15190:2007-10 | Structural adhesives - Test methods for assessing long term durability of bonded metallic structures |
| DIN EN 14493:2003-02 | STRUCTURAL ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
| DIN EN 15425:2008-06 | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| DIN EN 543:2003-08 | ADHESIVES - DETERMINATION OF APPARENT DENSITY OF POWDER AND GRANULE ADHESIVES |
| DIN EN 13887:2003-11 | STRUCTURAL ADHESIVES - GUIDELINES FOR SURFACE PREPARATION OF METALS AND PLASTICS PRIOR TO ADHESIVE BONDING |
| EN 1067:2005 | Adhesives - Examination and preparation of samples for testing |
| DIN EN 14259:2004-07 | Adhesives for floor coverings - Requirements for mechanical and electrical performance |
| DIN EN 542:2003-08 | ADHESIVES - DETERMINATION OF DENSITY |
| I.S. EN 12960:2001 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF SHEAR RESISTANCE |
| I.S. EN 12961:2001 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF OPTIMUM ACTIVATION TEMPERATURES AND MAXIMUM ACTIVATION LIFE OF SOLVENT-BASED AND DISPERSION ADHESIVES |
| UNE-EN 13999-2:2014 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds |
| UNE-EN 15416-3:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear |
| UNE-EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
| UNE-EN 14713:2017 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding |
| UNE-EN 14294:2010 | Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
| UNE-EN 15416-4:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions |
| UNE-EN 301:2014 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| UNE-EN 1372:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Peel test |
| UNE-EN 302-8:2017 | Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear |
| UNE-EN 204:2016 | Classification of thermoplastic wood adhesives for non-structural applications |
| UNE-EN 302-1:2013 | Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
| UNE-EN 12765:2016 | Classification of thermosetting wood adhesives for non-structural applications |
| UNE-EN 302-6:2013 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
| UNE-EN 302-7:2013 | Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions |
| UNE-EN 1902:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear creep test |
| UNE-EN 15274:2015 | General purpose adhesives for structural assembly - Requirements and test methods |
| UNE-EN 12703:2017 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature |
| UNE-EN 1373:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear test |
| UNE-EN 13999-1:2014 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure |
| UNE-EN 15425:2017 | Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements |
| UNE-EN 1242:2013 | Adhesives - Determination of isocyanate content |
| UNE-EN 302-5:2013 | Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions |
| UNE-EN 15416-1:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house test) |
| UNE-EN 16254:2014 | Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements |
| UNE-EN 14869-1:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| UNE-EN 14022:2010 | Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives |
| UNE-EN 15275:2015 | Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
| UNE-EN 14814:2016 | Adhesives for thermoplastic piping systems for fluids under pressure - Specifications |
| UNE-EN 14680:2016 | Adhesives for non-pressure thermoplastics piping systems - Specifications |
| UNE-EN 12704:2017 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives |
| UNE-EN 828:2013 | Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface |
| UNE-EN 205:2016 | Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints |
| UNE-CEN/TS 14999:2016 EX | Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container |
| UNE-EN 15307:2015 | Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
| UNE-EN 13415:2010 | Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites |
| UNE-EN ISO 9311-2:2011 | Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011) |
| UNE-EN 1903:2015 | Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing |
| I.S. EN ISO 19952:2005 | FOOTWEAR - VOCABULARY |
| I.S. EN 15190:2007 | STRUCTURAL ADHESIVES - TEST METHODS FOR ASSESSING LONG TERM DURABILITY OF BONDED METALLIC STRUCTURES |
Summarise
Sorry this product is not available in your region.