EN ISO 11118 : 2015 COR 2015
Withdrawn
GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015)
10-26-2015
04-20-2022
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Materials
6 Inspection and testing
7 Design
8 Construction and workmanship
9 Type approval procedure
10 Batch tests
11 Tests on every cylinder
12 Markings
13 Test reports and certificate of compliance
Annex A (normative) - Non-refillable sealing
devices - Specifications and prototype
testing
Annex B (informative) - Type approval certificate
Annex C (informative) - Certificate of compliance
Annex D (informative) - Yield point elongation (YPE)
Bibliography
describes minimum requirements for the material, design, inspections, construction and workmanship, manufacturing processes, and tests at manufacture of non-refillable metallic gas cylinders of welded, brazed, or seamless construction for compressed and liquefied gases including the requirements for their non-refillable sealing devices and their methods of testing.
| Committee |
TC 23
|
| DevelopmentNote |
Supersedes PREN ISO 11118. (10/2015) Supersedes EN ISO 13340 & EN 12205. (12/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| ISO 11118:2015 | Identical |
| NF EN ISO 11118 : 2015 | Identical |
| NBN EN ISO 11118 : 2015 | Identical |
| NEN EN ISO 11118 : 2015 | Identical |
| NS EN ISO 11118 : 2015 | Identical |
| I.S. EN ISO 11118:2015&LC:2015-12 | Identical |
| PN EN ISO 11118 : 2016 | Identical |
| BS EN ISO 11118:2015 | Identical |
| DIN EN ISO 11118:2016-03 | Identical |
| DS EN ISO 11118 : 2015 | Identical |
| UNE-EN ISO 11118:2016 | Identical |
| ISO 6506-3:2014 | Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks |
| ISO 6506-1:2014 | Metallic materials — Brinell hardness test — Part 1: Test method |
| ISO 11114-1:2012 | Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials |
| ISO 9809-4:2014 | Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa |
| ISO 6892-1:2016 | Metallic materials — Tensile testing — Part 1: Method of test at room temperature |
| ISO 20703:2006 | Gas cylinders — Refillable welded aluminium-alloy cylinders — Design, construction and testing |
| ISO 9329-1:1989 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| ISO 11114-3:2010 | Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere |
| ISO 4706:2008 | Gas cylinders — Refillable welded steel cylinders — Test pressure 60 bar and below |
| ISO 7866:2012 | Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
| ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 11114-2:2013 | Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 2: Non-metallic materials |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| ISO 13585:2012 | Brazing — Qualification test of brazers and brazing operators |
| ISO 17639:2003 | Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds |
| ISO 10156:2017 | Gas cylinders — Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets |
| ISO 6506-2:2017 | Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines |
| EN 13134:2000 | Brazing - Procedure approval |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials — Qualification based on pre-production welding test |
| ISO 9809-1:2010 | Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |