EN ISO 6806:2017
Withdrawn
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017)
06-21-2017
12-31-2017
European foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Construction
5 Dimensions and tolerances
6 Physical requirements for lining and cover
7 Physical requirements for hoses and hose assemblies
8 Frequency of testing
9 Type tests
10 Marking
Annex A (normative) - Test frequency
Annex B (informative) - Production tests
Annex C (normative) - Determination of oil swell
Annex D (normative) - Determination of resistance to
external pressure
Annex E (normative) - Determination of flammability
Annex F (normative) - Pressure impulse test
Bibliography
ISO 6806:2017 specifies the minimum requirements for rubber hoses and hose assemblies for use in oil burners.The following two types of hose assembly are specified.- Type 1: Hose assemblies for flux and reflux, but not for insertion between the oil burner pump and the atomizing connection; maximum working pressure 1,0 MPa (10 bar); maximum oil temperature 100 °C.- Type 2: Hose assemblies for insertion between the oil burner pump and the atomizing connection; maximum working pressure 4,0 MPa (40 bar); maximum oil temperature 100 °C.The hose assemblies specified in this document are not intended to be used, without special assessment, for purposes other than oil burner installations.
| Committee |
CEN/TC 218
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Standards | Relationship |
| I.S. EN ISO 6806:2017 | Identical |
| DIN EN ISO 6806:2017-09 | Identical |
| NF EN ISO 6806 : 2017 | Identical |
| ISO 6806:2017 | Identical |
| NEN EN ISO 6806 : 2017 | Identical |
| I.S. EN ISO 6806:2014 | Identical |
| BS EN ISO 6806:2017 | Identical |
| NBN EN ISO 6806 : 2014 | Identical |
| PN EN ISO 6806 : 2017 | Identical |
| DIN EN ISO 6806:2015-08 (Draft) | Identical |
| NS EN ISO 6806 : 2017 | Identical |
| DS EN ISO 6806 : 2017 | Identical |
| UNE-EN ISO 6806:2017 | Identical |
| 09/30202307 DC : 0 | BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
| EN 12514-2:2000 | Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters |
| EN 12514-1:2000 | Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks |
| 09/30202316 DC : 0 | BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
| I.S. EN 12514-2:2000 | INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS - PART 2: SAFETY REQUIREMENTS AND TESTS; PARTS, VALVES, PIPES, FILTERS, OIL DE-AERATORS, METERS |
| EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
| DIN EN 267:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 267:2011-11 | Automatic forced draught burners for liquid fuels |
| EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
| I.S. EN 12115:2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| I.S. EN 12514-1:2000 | INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS - PART 1: SAFETY REQUIREMENTS AND TESTS - PARTS, OIL FEED PUMPS, CONTROL AND SAFETY DEVICES, SUPPLY TANKS |
| 12/30258099 DC | BS EN 267. Forced draught burners for liquid fuels |
| BS EN 267 : 2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 12514-2:2009-06 (Draft) | INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS - PART 2: SAFETY REQUIREMENTS AND TESTS - PARTS, VALVES PIPES, FILTERS, OIL DE-AERATORS, METERS |
| DIN EN 12115:2011-04 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011 |
| I.S. EN 267:2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| BS EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification |
| BS EN 12514-2:2000 | Installations for oil supply systems for oil burners Safety requirements and tests. Parts, valves, pipes, filters, oil de-aerators, meters |
| BS EN 12514-1:2000 | Installations for oil supply systems for oil burners Safety requirements and tests. Parts, oil feed pumps, control and safety devices, supply tanks |
| 09/30202313 DC : 0 | BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS |
| DIN EN 12514-1:2009-06 (Draft) | INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS - PART 1: SAFETY REQUIREMENTS AND TESTS - PARTS, OIL FEED PUMPS, CONTROL AND SAFETY DEVICES, SUPPLY TANKS |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| ISO 7326:2016 | Rubber and plastics hoses — Assessment of ozone resistance under static conditions |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies — Vocabulary |
| ISO 10619-2:2011 | Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 2: Bending tests at sub-ambient temperatures |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| ISO 4671:2007 | Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
| ISO 1402:2009 | Rubber and plastics hoses and hose assemblies — Hydrostatic testing |
| ISO 1307:2006 | Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 1436:2017 | Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic — Determination of the effect of liquids |