I.S. EN 10217-2:2002

1 SCOPE
2 NORMATIVE REFERENCES
3 TERMS AND DEFINITIONS
4 SYMBOLS
5 CLASSIFICATION AND DESIGNATION
   5.1 Classification
   5.2 Designation
6 INFORMATION TO BE SUPPLIED BY THE PURCHASER
   6.1 Mandatory information
   6.2 Options
7 MANUFACTURING PROCESS
   7.1 Steelmaking process
   7.2 Deoxidation process
   7.3 Tube manufacture and delivery conditions
8 REQUIREMENTS
   8.1 General
   8.2 Chemical composition
   8.3 Mechanical properties
   8.4 Appearance and internal soundness
   8.5 Straightness
   8.6 Preparation of ends
   8.7 Dimensions, masses and tolerances
9 INSPECTION
   9.1 Types of inspection
   9.2 Inspection documents
         9.2.1 Types of inspection documents
         9.2.2 Content of inspection documents
   9.3 Summary of inspection and testing
10 SAMPLING
   10.1 Frequency of tests
   10.2 Preparation of samples and test pieces
11 TEST METHODS
   11.1 Chemical analysis
   11.2 Tensile test on base material
   11.3 Transverse tensile test on the weld
   11.4 Flattening test
   11.5 Ring tensile test
   11.6 Drift expanding test
   11.7 Ring expanding test
   11.8 Impact test
   11.9 Leak tightness test
   11.10 Dimensional inspection
   11.11 Visual examination
   11.12 Non-Destructive Testing
   11.13 Material identification
   11.14 Retests, sorting and reprocessing
12 MARKING
   12.1 Marking to be applied
   12.2 Additional marking
13 PROTECTION
Annex ZA (informative) Relationship between this European
                       Standard and the Essential Requirements
                       of 97/23/EC
Bibliography

Defines the technical delivery conditions in two test categories of electric welded tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel.