I.S. EN 50588-1:2017
Withdrawn
View Superseded by
MEDIUM POWER TRANSFORMERS 50 HZ, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS
Hardcopy , PDF
English
01-01-2017
06-30-2021
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
National Foreword
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Environmental classes
5 Electrical characteristics
6 Load loss, no load loss, PEI, sound power level,
short-circuit impedance
7 Tolerances
8 Rating plate
9 Tests
10 Design requirements
11 Accessories
Annex A (informative) - Calculation of PEI and k[PEI]
Annex B (informative) - A-deviations
Annex ZZ (informative) - Relationship between this European
Standard and the eco-design requirements of Commission
Regulation (EU) No 548/2014 aimed be covered
Bibliography
Defines medium power transformers. 'Medium power transformer' means a power transformer with a highest voltage for equipment higher than 1,1 kV, but not exceeding 36 kV and a rated power equal to or higher than 5 kVA but lower than 40 MVA.
| DevelopmentNote |
Supersedes I.S. EN 50464-1 & I.S. EN 50541-1. (07/2015)
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 50588-1:2017 | Identical |
| BS EN 50588-1:2017 | Equivalent |
| EN 62262:2002 | Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
| ISO/IEC 17065:2012 | Conformity assessment — Requirements for bodies certifying products, processes and services |
| IEC 60038:2009 | IEC standard voltages |
| EN 60085:2008 | Electrical insulation - Thermal evaluation and designation |
| IEC TR 60616:1978 | Terminal and tapping markings for power transformers |
| EN 50387:2002 | Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers |
| EN 50464-4 : 2007 AMD 1 2011 | THREE-PHASE OIL-IMMERSED DISTRIBUTION TRANSFORMERS 50 HZ, FROM 50 KVA TO 2500 KVA WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 4: REQUIREMENTS AND TESTS CONCERNING PRESSURISED CORRUGATED TANKS |
| EN 61100:1992 | Classification of insulating liquids according to fire point and net calorific value |
| IEC 61100:1992 | Classification of insulating liquids according to fire-point and net calorific value |
| EN 61869-1:2009 | Instrument transformers - Part 1: General requirements |
| EN 50386:2010/A1:2013 | BUSHINGS UP TO 1 KV AND FROM 250 A TO 5 KA, FOR LIQUID FILLED TRANSFORMERS |
| EN 50464-1 : 2007 AMD 1 2012 | THREE-PHASE OIL-IMMERSED DISTRIBUTION TRANSFORMERS 50 HZ, FROM 50 KVA TO 2500 KVA WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS |
| IEC 60505:2011 | Evaluation and qualification of electrical insulation systems |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| EN 50180:2010 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers – Part 1: General requirements for bushings |
| EN 50329:2003/A1:2010 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - TRACTION TRANSFORMERS |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN ISO/IEC 17065:2012 | Conformity assessment - Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012) |
| IEC 62262:2002 | Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
| EN 60076-1:2011 | Power transformers - Part 1: General |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 50181:2010 | Plug-in type bushings above 1 kV up to 52 kV and from 250 A to 2,50 kA for equipment other than liquid filled transformers |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN 61378-1:2011 | Convertor transformers - Part 1: Transformers for industrial applications |
| EN 60505:2011/AC:2017-03 | EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS (IEC 60505:2011/COR1:2017) |
| IEC 61378-1:2011 | Converter transformers - Part 1: Transformers for industrial applications |
| EN 60038:2011 | CENELEC standard voltages |
| EN 60076-6:2008 | Power transformers - Part 6: Reactors |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.