• There are no items in your cart

ICC IFGC CODE AND COMMENTARY : 2015

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

IFGC® Code and Commentary
Available format(s)

Hardcopy , PDF

Superseded date

07-21-2020

Language(s)

English

Published date

01-01-2015

CHAPTER 1 - SCOPE AND ADMINISTRATION
PART 1 - SCOPE AND APPLICATION
PART 2 - ADMINISTRATION AND ENFORCEMENT
CHAPTER 2 - DEFINITIONS
CHAPTER 3 - GENERAL REGULATIONS
CHAPTER 4 - GAS PIPING INSTALLATIONS
CHAPTER 5 - CHIMNEYS AND VENTS
CHAPTER 6 - SPECIFIC APPLIANCES
CHAPTER 7 - GASEOUS HYDROGEN
            SYSTEMS
CHAPTER 8 - REFERENCED STANDARDS
APPENDIX A - SIZING AND CAPACITIES OF
             GAS PIPING (IFGS)
APPENDIX B - SIZING OF VENTING SYSTEMS
             SERVING APPLIANCES EQUIPPED
             WITH DRAFT HOODS, CATEGORY
             I APPLIANCES AND APPLIANCES
             LISTED FOR USE WITH TYPE
             B VENTS (IFGS)
APPENDIX C - EXIT TERMINALS OF MECHANICAL
             DRAFT AND DIRECT-VENT VENTING
             SYSTEMS (IFGS)
APPENDIX D - RECOMMENDED PROCEDURE
             FOR SAFETY INSPECTION OF AN
             EXISTING APPLIANCE INSTALLATION (IFGS)
INDEX

This code shall apply to the installation of fuel-gas piping systems, fuel gas appliances, gaseous hydrogen systems and related accessories.

DocumentType
Standard
ISBN
978-1-6083-292-6
Pages
427
ProductNote
HIS STANDARD ALSO REFERS TO ANSI A13.1-2007,BPVC—2010/2011 addenda,CSD-1—2011,CGA S 1.2-2005,CSA 8—93,CSA FC1—2012,
PublisherName
International Code Council (ICC)
Status
Superseded
SupersededBy
Supersedes

CSA 6.16 : 2015 CONNECTORS FOR MOVEABLE GAS APPLIANCES
ANSI Z83.4-2017/CSA 3.7-2017 Non-recirculating direct gas-fired heating and forced ventilation appliances for commercial and industrial application
ANSI Z21.84 : 2012 MANUALLY LIGHTED, NATURAL GAS, DECORATIVE GAS APPLIANCES FOR INSTALLATION IN SOLID-FUEL BURNING APPLIANCES
UL 103:11ED 2010-10 Factory-Built Chimneys for Residential Type and Building Heating Appliances
ANSI Z21.75 : 2016 CONNECTORS FOR OUTDOOR GAS APPLIANCES AND MANUFACTURED HOMES
ANSI Z21.10.1 : 2014 GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS
CSA 2.6 : 2016 GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES
ANSI Z21.58 : 2015 OUTDOOR COOKING GAS APPLIANCES
ICC IECC INTERNATIONAL ENERGY CONSERVATION CODE : 2015 INTERNATIONAL ENERGY CONSERVATION CODE
CSA 4.9 : 2014 GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS
ANSI Z21.13 : 2014 GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS
ICC IRC INTERNATIONAL RESIDENTIAL CODE : 2015 INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS
NFPA 58 : 2017 LIQUEFIED PETROLEUM GAS CODE
ANSI Z21.11.2 : 2013 GAS-FIRED ROOM HEATERS, VOLUME II, UNVENTED ROOM HEATERS
NFPA 30A : 2018 MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES
ANSI Z21.69 : 2015 CONNECTORS FOR MOVEABLE GAS APPLIANCES
NFPA 853 : 2010 INSTALLATION OF STATIONARY FUEL CELL POWER SYSTEMS
CSA 4.7 : 2014 GAS-FIRED POOL HEATERS
ANSI Z21.40.1 : 1996 GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES
CSA 2.33 : 2016 VENTED GAS FIREPLACE HEATERS
CSA 4.3 : 2014 GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS
CSA 6.22 : 2011 LINE PRESSURE REGULATORS
ANSI FC 1 : 2012 STATIONARY FUEL CELL POWER SYSTEMS
UL 2200:2ED 2012-06 Standard for Stationary Engine Generator Assemblies
UL 795:8ED 2016-12 Commercial-Industrial Gas Heating Equipment
ANSI Z21.5.2 : 2016 GAS CLOTHES DRYERS, VOLUME 2, TYPE 2 CLOTHES DRYERS
ANSI Z83.18 : 2015 RECIRCULATING DIRECT GAS-FIRED HEATING AND FORCED VENTILATION APPLIANCES FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS
NFPA 88A : 2015 PARKING STRUCTURES
CSA 7.1 : 2016 GAS CLOTHES DRYERS, VOLUME 1, TYPE 1 CLOTHES DRYERS
CSA 6.27 : 2016 CONNECTORS FOR OUTDOOR GAS APPLIANCES AND MANUFACTURED HOMES
ASTM A 254 : 1997 Standard Specification for Copper-Brazed Steel Tubing
ANSI Z83.20 : 2016 GAS-FIRED TUBULAR AND LOW-INTENSITY INFRARED HEATERS
ANSI Z21.50 : 2016 VENTED DECORATIVE GAS APPLIANCES
UL 651:8ED 2011-10 Schedule 40, 80, Type EB and A Rigid PVC Conduit and Fittings
CSA/ANSI Z21.42:13 (R2018) Gas-fired illuminating appliances
UL 1618:2ED 2015-10 Standard for Wall Protectors, Floor Protectors, and Hearth Extensions
CSA 2.22 : 2016 VENTED DECORATIVE GAS APPLIANCES
ANSI Z21.61 : 1983 GAS-FIRED TOILETS
ANSI Z21.86-2016/CSA 2.32-2016 VENTED GAS-FIRED SPACE HEATING APPLIANCES
CSA 6.10 : 2015 CONNECTORS FOR GAS APPLIANCES
UL 959:9ED 2010-12 Standard for Medium Heat Appliance Factory-Built Chimneys
ASTM D 2513 : 2017-01 SPECIFICATION FOR POLYETHYLENE (PE) GAS PRESSURE PIPE, TUBING, AND FITTINGS
ANSI/CSA FC 1:2014 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
ANSI Z21.47 : 2016 GAS-FIRED CENTRAL FURNACES
ASTM B 88 : 2016 : REDLINE Standard Specification for Seamless Copper Water Tube
CSA 4.1 : 2014 GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS
UL 127:9ED 2011-04 Standard for Factory-Built Fireplaces
UL 441:11ED 2016-04 Standard for Gas Vents
ICC IBC INTERNATIONAL BUILDING CODE : 2015 INTERNATIONAL BUILDING CODE
ANSI Z21.97 : 2014 OUTDOOR DECORATIVE GAS APPLIANCES
ANSI Z21.88 : 2016 VENTED GAS FIREPLACE HEATERS
ANSI Z21.19-2014/CSA 1.4-2014 REFRIGERATORS USING GAS FUEL
NFPA 85 : 2015 BOILER AND COMBUSTION SYSTEMS HAZARDS CODE
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
CSA 2.26 : 2012 DECORATIVE GAS APPLIANCES FOR INSTALLATION IN SOLID-FUEL BURNING FIREPLACES
NFPA 51 : 2018 DESIGN AND INSTALLATION OF OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES
CGA S 1.2 : 2009 PRESSURE RELIEF DEVICE STANDARDS - PART 2: PORTABLE CONTAINERS FOR COMPRESSED GASES
NFPA 409 : 2016 AIRCRAFT HANGARS
ANSI Z83.4-2017/CSA 3.7-2017 NON-RECIRCULATING DIRECT GAS-FIRED HEATING AND FORCED VENTILATION APPLIANCES FOR COMMERCIAL AND INDUSTRIAL APPLICATION
ANSI Z21.54 : 2014 GAS HOSE CONNECTORS FOR PORTABLE OUTDOOR GAS-FIRED APPLIANCES
CSA 1.8 : 2016 GAS FOOD SERVICE EQUIPMENT
ANSI Z21.91 : 2007 VENTLESS FIREBOX ENCLOSURES FOR GAS-FIRED UNVENTED DECORATIVE ROOM HEATERS
ANSI Z21.56 : 2014 GAS-FIRED POOL HEATERS
ANSI Z21.60 : 2012 DECORATIVE GAS APPLIANCES FOR INSTALLATION IN SOLID-FUEL BURNING FIREPLACES
CFR 49(PTS178-199) : OCT 2017 TRANSPORTATION
UL 641:8ED 2010-12 Standard for Type L Low-Temperature Venting Systems
ICC IMC INTERNATIONAL MECHANICAL CODE : 2015 INTERNATIONAL MECHANICAL CODE
CSA 6.26 : 2016 FUEL GAS PIPING SYSTEMS USING CORRUGATED STAINLESS STEEL TUBING
ASTM B 241/B241M : 2016 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
ANSI Z21.86-2016/CSA 2.32-2016 Vented gas-fired space heating appliances
ANSI Z83.11 : 2016 GAS FOOD SERVICE EQUIPMENT
NFPA 82 : 2014 INCINERATORS AND WASTE AND LINEN HANDLING SYSTEMS AND EQUIPMENT
NFPA 37 : 2018 INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES
ANSI Z21.1 : 2016 HOUSEHOLD COOKING GAS APPLIANCES
ANSI Z21.19 : 2014 REFRIGERATORS USING GAS FUEL
ICC IPC INTERNATIONAL PLUMBING CODE : 2015 INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC)
CSA 1.6 : 2015 OUTDOOR COOKING GAS APPLIANCES
NFPA 211 : 2016 CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL-BURNING APPLIANCES
ANSI Z21.5.1 : 2016 GAS CLOTHES DRYERS, VOLUME 1, TYPE 1 CLOTHES DRYERS
ANSI Z21.24 : 2015 CONNECTORS FOR GAS APPLIANCES
CGA S 1.3 : 2008 PRESSURE RELIEF DEVICE STANDARDS - PART 3: STATIONARY STORAGE CONTAINERS FOR COMPRESSED GASES
ICC IFC INTERNATIONAL FIRE CODE : 2015 INTERNATIONAL FIRE CODE
CGA S 1.1 : 2011 PRESSURE RELIEF DEVICE STANDARDS - PART 1: CYLINDERS FOR COMPRESSED GASES
CSA 2.3 : 2016 GAS-FIRED CENTRAL FURNACES
ANSI Z21.5.2-2016/CSA 7.2:2016 GAS CLOTHES DRYERS, VOLUME 2, TYPE 2 CLOTHES DRYERS
MSS SP 58 : 2009 PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION
CFR 49(PTS100-185) : 0 TRANSPORTATION
ANSI Z83.8 : 2016 GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES

View more information
US$142.80
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.