IEC 60061-1:2005 CSV

CONTENTS BY DESIGNATION
FOREWORD
PREFACE
Bi-pin caps G1.27, GX1.27 & GY1.3
Bi-pin caps G2.54, GX2.54 & GY2.5
Bi-pin caps G3.17 & GY3.2
Prefocus cap PX26d
Screw caps E11
Screw caps EY10
Bayonet caps BAX9s
Bayonet caps BAY9s
Caps B22d
Bayonet cap B22d-3 (90 degrees/135 degrees)/25x26
Caps B15d
Bayonet caps BA15
Bayonet caps BAY15d
Caps BAZ15
Bayonet caps BA15s-3
Caps BAW15
Bayonet caps BA20
Bayonet automobile caps BA21-3 (120 degrees)
Bayonet caps BA9
Bayonet cap BA7
Bayonet cap BY22d
Bayonet caps BAX15d
Caps BAU15
Termination on finished lamps G16d
Screw caps E27
Screw caps E26
Screw caps E10
Screw caps E14
Screw caps E40
Screw caps E39
Screw cap E5
Screw cap E17
Screw cap E27/51x39
Screw cap E12
Double contact screw cap E26d
Prefocus screw caps EP10
Prefocus caps P20d, PX20d, PY20d & PZ20d
Prefocus caps P22d & PX22d
Caps 2G13
Prefocus caps - Assembly of ring and cap on finished lamps
PX43t
Prefocus cap PX13.5s
Prefocus cap P26s on finished lamp
Prefocus caps - Assembly of ring and cap on finished lamps
PKX22s
Prefocus cap - Assembly of collar and cap on finished lamps P18s
Prefocus caps P43t
Prefocus cap P13.5s
Prefocus cap P38s
Prefocus cap P46s
Prefocus caps P28s
Prefocus caps P40s
Prefocus cap P30s-10.3. Assembly on finished lamps
Projecctor lamp caps on finished lamps G17q-7, GX17q-7 & GY17q-7
Prefocus cap - Assembly of ring and cap on finished lamp P14.5s
Prefocus cap PK22s
Prefocus cap PG22-6.35. Assembly of collar and cap on finished
lamp
Prefocus caps P36
Bi-pin caps G13
Bi-pin caps G5
Bi-pin cap G20
Cap G10q
Single-pin cap Fa6
Recessed double contact cap R17d on finished lamps
Single-pin caps Fa8
Single-pin cap and end of lamp for tubular lamps Fa4
Bi-pin bases with and without provision for use with heat sinks
G6.35, GX6.35, & GY6.35
Bi-pin lamp base GZ6.35
Caps for double-capped tubular lamps S15s and S19s
Flanged cap SX6s
Grooved cap S5.7s
Caps on finished lamps G12
Caps on finished lamps PG12 & PGX12
Four-pin cap and lamp base GX38q
Prefocus caps P29t
Bi-pin lamp base GZ4
Cap GR8
Bi-pin cap G23
Bi-pin cap G9.5
Bi-pin cap GX9.5
Bi-pin caps GY9.5 & GZ9.5, GZX9.5, GZY9.5 & GZZ9.5
Base of flashcube
Bi-pin lamp base G4
Bi-pin lamp base GY4
Bi-pin cap G5.3
Bi-pin base GX5.3
Bi-pin base GY5.3
Bi-pin cap GY16
Bi-pin cap and base G22
Bi-pin caps and lamp base G38
Cap GR10q
Caps G24, GX24 and GY24
Cap P11.5d
Festoon caps SV7
Festoon caps SV8.5
Cap 2G11
Caps for tubular infra-red lamps SK15s
Caps on finished lamps GX10q
Caps on finished lamps GY10q
Bi-pin cap GX23
Caps on finished lamps G32, GX32 & GY32
Prefocus caps - Assembly of ring and cap on finished lamps
PY43d
Prefocus cap - Assembly of ring and cap on finished lamps PZ43t
Base of photo-flash lamp W10.6x8.5d
Lamp base W2.1x9.5 d
Recessed single contact cap and end of lamp R7s
Recessed single contact cap and end of lamp RX7s
Prefocus lamp base WP4x9d
Lamp base W2x4.6d
Prefocus cap P45t
Lamp base W3.3x10.4d
Flanged caps SX4s/4
Flanged caps SY4s/7
Base of magicube type X
Prefocus cap and end of lamp for automobile lamps X511
Termination of finished lamps G16t
Caps GRX10q
Cap 2G7
Cap 2GX7
Wedge bases W2.5x16
Wedge bases WX2.5x16
Wedge base WY2.5x16
Wedge base WZ2.5x16
Wedge base WU2.5x16
Lamp bases W3x16d & WX3x16d
Lamp bases W3x16q WX3x16q
Caps PG13 & PGJ13
Bi-pin lamp bases GU4
Bi-pin bases GU5.3
Caps PGJ19
Prefocus caps P32d & PK32d
Caps S14
Bi-pin lamp base GU7
Cap and end of lamp Fc2
Cap W4.3x8.5d
Screw cap EZ10
Cap G17.5t-1
Cap 2G10
Bi-pin cap GY22
Bi-pin lamp base GZ10
Bi-pin lamp base GU10
Base G8.5
Cap GU10q
Cap GZ10q
Cap 2GX13
Base G5.3-4.8
Caps PG20 & PGU20
Prefocus caps P26.4t & PJ26.4t
Base G9
Skirted screw caps E26/50x39 & E26/51x39
Caps GRZ10d
Caps GRZ10t
Caps P38t
Termination on finished lamps G53
Caps GX12
Printed circuit caps GZX7d, GZY7d & GZZ7d
Printed circuit caps GUX2.5d, GUY2.5d & GUZ2.5d

Subscribe to IEC 60061 Database to access the full and updated content of the series.

IEC 60061 Lamp caps and holders together with gauges for the control of interchange ability and safety consists of four Parts: Part 1: Lamp caps Part 2: Lampholders Part 3: Gauges Part 4: Guidelines and general information Each part is independent of the other, but a given part should always be studied in conjunction with the other parts. This consolidated version of IEC 60061-1 is based on the third edition (1969) and its supplements A(1970), B(1971), C(1972), D(1972), E(1972), F(1975), G(1977), H(1977), J(1980), K(1983), L(1987), M(1989), N(1992), P(1994), Q(1994), R(1995), S(1996), T(1996), U(1996), V(1997), and amendments 21(1998), 22(1999), 23(1999), 24(2000), 25(2001), 26(2001), 27(2001), 28(2002), 29(2002), 30(2002), 31(2003), 32(2003), 33(2003), 34(2004) and 35(2004). It bears the edition number 3.35. OS