• There are no items in your cart

IEC 60812:2006

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

12-31-2021

Language(s)

English - French, English, French, Spanish, Castilian

Published date

01-25-2006

FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Overview
  4.1 Introduction
  4.2 Purpose and objectives of the analysis
5 Failure modes and effects analysis
  5.1 General considerations
  5.2 Preliminary tasks
  5.3 Failure mode, effects, and criticality analysis (FMECA)
  5.4 Report of analysis
6 Other considerations
  6.1 Common-cause failures
  6.2 Human factors
  6.3 Software errors
  6.4 FMEA regarding consequences of system failure
7 Applications
  7.1 Use of FMEA/FMECA
  7.2 Benefits of FMEA
  7.3 Limitations and deficiencies of FMEA
  7.4 Relationships with other methods
Annex A (informative) Summary of procedures for FMEA and FMECA
Annex B (informative) Examples of analyses
Bibliography

This International Standard describes Failure Mode and Effects Analysis (FMEA) and Failure Mode, Effects and Criticality Analysis (FMECA), and gives guidance as to how they may be applied to achieve various objectives by: providing the procedural steps necessary to perform analysis; identifying appropriate terms; defining basic principles; providing examples of the necessary worksheets or other tabular forms.

Committee
TC 56
DevelopmentNote
Stability Date: 2017. (09/2017)
DocumentType
Standard
Pages
93
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes

DD CEN ISO/TS 22367:2010 Medical laboratories. Reduction of error through risk management and continual improvement
14/30299530 DC : 0 BS EN 62923 - MARITIME NAVIGATION AND RADIO COMMUNICATION EQUIPMENT AND SYSTEMS -BRIDGE ALERT MANAGEMENT - OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS
CEI 56-46 : 2005 DEPENDABILITY MANAGEMENT - PART 3-5: APPLICATION GUIDE - RELIABILITY TEST CONDITIONS AND STATISTICAL TEST PRINCIPLES
PD IEC/TR 63039:2016 Probabilistic risk analysis of technological systems. Estimation of final event rate at a given initial state
EN ISO 15378:2017 Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017)
BS EN 61427-2:2015 Secondary cells and batteries for renewable energy storage. General requirements and methods of test On-grid applications
09/30195890 DC : DRAFT OCT 2009 BS ISO 13379-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - DATA INTERPRETATION AND DIAGNOSTICS TECHNIQUES - PART 1: GENERAL GUIDELINES
BS EN 31010:2010 Risk management. Risk assessment techniques
BS EN 61226:2010 Nuclear power plants. Instrumentation and control important to safety. Classification of instrumentation and control functions
BS EN 50156-2:2015 Electrical equipment for furnaces and ancillary equipment Requirements for design, development and type approval of safety devices and subsystems
12/30227555 DC : 0 BS EN 60860 ED 2.0 - RADIATION PROTECTION INSTRUMENTATION WARNING EQUIPMENT FOR CRITICALITY ACCIDENTS
15/30328959 DC : 0 BS ISO 16142-2 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
BS ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Safety
DD CEN/TS 13763-27:2003 Explosives for civil uses. Detonators and relays Definitions, methods and requirements for electronic initiation systems
I.S. EN 12445:2000 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - TEST METHODS
15/30324519 DC : 0 BS EN ISO 14224 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT
ISO 15686-7:2017 Buildings and constructed assets — Service life planning — Part 7: Performance evaluation for feedback of service life data from practice
UNE-EN 61907:2013 Communication network dependability engineering
CEI EN 61869-6 : 1ED 2017 INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
10/30235503 DC : 0 BS EN 61496-1 AMD 2 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
CEI EN 60300-3-12 : 2012 DEPENDABILITY MANAGEMENT - PART 3-12: APPLICATION GUIDE - INTEGRATED LOGISTIC SUPPORT
BS ISO 13381-1:2015 Condition monitoring and diagnostics of machines. Prognostics General guidelines
10/30198892 DC : 0 BS EN ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
12/30235274 DC : 0 BS EN 50126-4 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 4: ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SYSTEMS
13/30279579 DC : 0 BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
DEFSTAN 00-58(PT2)/2(2000) : 2000 HAZOP STUDIES ON SYSTEMS CONTAINING PROGRAMMABLE ELECTRONICS - PART 2: GENERAL APPLICATION GUIDANCE
CSA Q636 : 0 GUIDELINES AND REQUIREMENTS FOR RELIABILITY ANALYSIS METHODS
PD IEC/TS 62941:2016 Terrestrial photovoltaic (PV) modules. Guidelines for increased confidence in PV module design qualification and type approval
PD CR 954-100:1999 Safety of machinery. Safety-related parts of control systems Guide on the use and application of EN 954-1:1996
16/30346073 DC : 0 BS ISO 16142-2 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
02/714108 DC : DRAFT DEC 2002 BS ISO 13381-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - PROGNOSTICS - PART 1: GENERAL GUIDELINES
CEI EN 61014 : 2006 PROGRAMMES FOR RELIABILITY GROWTH
I.S. EN 62506:2013 METHODS FOR PRODUCT ACCELERATED TESTING (IEC 62506:2013 (EQV))
BS EN 62502:2011 Analysis techniques for dependability. Event tree analysis (ETA)
BS IEC 60860:2014 Radiation protection instrumentation. Warning equipment for criticality accidents
BS EN 60987:2015 Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
BS EN 62282-3-100:2012 Fuel cell technologies Stationary fuel cell power systems. Safety
BS EN 61078:2016 Reliability block diagrams
17/30337986 DC : 0 BS EN ISO 20815 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT
BS EN 62198:2014 Managing risk in projects. Application guidelines
MIL-HDBK-470 Revision A:1997 DESIGNING AND DEVELOPING MAINTAINABLE PRODUCTS AND SYSTEMS - VOLUME 1
CEI EN 61907 : 2011 COMMUNICATION NETWORK DEPENDABILITY ENGINEERING
10/30175182 DC : 0 BS EN 62551 - ANALYSIS TECHNIQUES FOR DEPENDABILITY - PETRI NET MODELLING
05/30101071 DC : DRAFT FEB 2005
BS ISO 13379:2003 Condition monitoring and diagnostics of machines. General guidelines on data interpretation and diagnostics techniques
CSA ISO/TR 10017 : 2003 : R2013 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
01/205664 DC : DRAFT JUL 2001 DRAFT IEC 60825-1 ED.3 - SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS
CEI EN 60300-3-2 : 2006 DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
UNI ISO 13372 : 2013 CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VOCABULARY
AAMI ISO 13408-1 : 2008 : R2011 ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS
CSA ISO 14971 : 2007 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
CSA ISO/IEC 16085 : 2007 SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
I.S. EN 60044-8:2002 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
BS EN 60044-8:2002 Instrument transformers Electronic current transformers
CEI EN 50495 : 2011 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
UNE-EN ISO 15378:2016 Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO 15378:2015)
CSA C60044-8 : 2007 : R2016 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
SAE J 1211 : 2012 HANDBOOK FOR ROBUSTNESS VALIDATION OF AUTOMOTIVE ELECTRICAL/ELECTRONIC MODULES
ANSI FC 1 : 2012 STATIONARY FUEL CELL POWER SYSTEMS
CEI EN 62308 : 2010 EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS
I.S. EN 62282-5-1:2012 FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012 (EQV))
GOST ISO 14698-1 : 2005 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS
CSA HPIT 2-2017 Dispensing systems and components for fueling hydrogen powered industrial trucks
PD ISO/IEC/TR 15026-1:2010 Systems and software engineering. Systems and software assurance Concepts and vocabulary
EN 50126-1:2017 Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Generic RAMS Process
CSA C22.2 No. 62282-2 : 2007 : R2013 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
I.S. EN 61869-6:2016 INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
I.S. EN 62282-6-100:2010 FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010 (EQV))
ISO 16142-2:2017 Medical devices — Recognized essential principles of safety and performance of medical devices — Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards
I.S. EN 61508-7:2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
BS EN 62402:2007 Obsolescence management. Application guide
I.S. EN 61882:2016 HAZARD AND OPERABILITY STUDIES (HAZOP STUDIES) - APPLICATION GUIDE
I.S. EN 62628:2012 GUIDANCE ON SOFTWARE ASPECTS OF DEPENDABILITY (IEC 62628:2012 (EQV))
BS EN ISO 20815:2010 Petroleum, petrochemical and natural gas industries. Production assurance and reliability management
ISO 13372:2004 Condition monitoring and diagnostics of machines Vocabulary
AAMI ISO 14971 : 2007 : INC : ERR 1 : 2007 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
NF ISO 16110-1 : 2009 HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY
UNE-EN 62198:2015 Managing risk in projects - Application guidelines
CCS GUIDE FOR SAFETY AND RELIABILITY : 2017 GUIDE FOR SAFETY AND RELIABILITY ASSESSMENT FOR SHIPBOARD SOFTWARE
I.S. EN 60300-3-15:2009 DEPENDABILITY MANAGEMENT - PART 3-15: APPLICATION GUIDE - ENGINEERING OF SYSTEM DEPENDABILITY
I.S. EN 61165:2006 APPLICATION OF MARKOV TECHNIQUES
ISO 13379-1:2012 Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 1: General guidelines
EN ISO 80079-36:2016 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
BS EN ISO 80079-36:2016 Explosive atmospheres Non-electrical equipment for explosive atmospheres. Basic method and requirements
DIN EN ISO 14698-1 E : 2004 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS
DIN EN ISO 13849-2:2013-02 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
UNE-EN ISO 13849-2:2013 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
BS EN 12075:1997 Biotechnology. Large scale process and production. Procedures for fermentation and downstream processes
05/30060689 DC : DRAFT JUN 2005 IEC 62282-3-1 - FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER PLANTS - SAFETY
IEC 62673:2013 Methodology for communication network dependability assessment and assurance
IEC 61069-5:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability
ISO 13408-1:2008 Aseptic processing of health care products — Part 1: General requirements
EN 61924-2:2013 Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Part 2: Modular structure for INS - Operational and performance requirements, methods of testing and required test results
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
CLC/TR 50126-2:2007 Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 2: Guide to the application of EN 50126-1 for safety
EN 62282-3-1 : 2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
EN 50129 : 2003 COR 2010 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING
EN 62506 : 2013 METHODS FOR PRODUCT ACCELERATED TESTING (IEC 62506:2013)
EN 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
EN 61162-460:2015 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Multiple talkers and multiple listeners - Ethernet interconnection - Safety and security
EN 60300-3-12:2011 Dependability management - Part 3-12: Application guide - Integrated logistic support
EN 60300-3-2 : 2005 Dependability management - Part 3-2: Application guide - Collection of dependability data from the field
EN 62402 : 2007 OBSOLESCENCE MANAGEMENT - APPLICATION GUIDE
EN 62940:2017 Maritime navigation and radiocommunication equipment and systems - Integrated communication system (ICS) - Operational and performance requirements, methods of testing and required test results
CR 954-100:1999 Safety of machinery - Safety-related parts of control systems - Part 100: Guide on the use and application of EN 954-1:1996
EN 12445:2000 Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods
EN 60300-3-15 : 2009 DEPENDABILITY MANAGEMENT - PART 3-15: APPLICATION GUIDE - ENGINEERING OF SYSTEM DEPENDABILITY
EN 60300-3-4:2008 Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements
EN 62429:2008 Reliability growth - Stress testing for early failures in unique complex systems
EN 60825-2:2004/A2:2010 SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS)
EN 61869-6:2016 Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers
EN 62673 : 2013 METHODOLOGY FOR COMMUNICATION NETWORK DEPENDABILITY ASSESSMENT AND ASSURANCE (IEC 62673:2013)
EN 61882:2016 Hazard and operability studies (HAZOP studies) - Application guide
EN 61907:2010 Communication network dependability engineering
EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
DIN EN ISO 14698-1:2004-04 Cleanrooms and associated controlled environments - Biocontamination control - Part 1: General principles and methods (ISO 14698-1:2003)
EN 62308 : 2006 EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS
EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
EN 61025:2007 Fault tree analysis (FTA)
EN 12075:1997 Biotechnology - Large-scale process and production - Procedures for fermentation and downstream processes
IPC 9592 : B REQUIREMENTS FOR POWER CONVERSION DEVICES FOR THE COMPUTER AND TELECOMMUNICATIONS INDUSTRIES
DEFSTAN 00-56(PT2)/2(1996) : 1996 SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE
BS IEC 60300-3-1 : 2003 AMD 15370 DEPENDABILITY MANAGEMENT - APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY
I.S. EN 50129:2003 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING
CEI 56-53 : 2006 DEPENDABILITY MANAGEMENT - PART 3-10: APPLICATION GUIDE - MAINTAINABILITY
NF EN 61226 : 2010 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - CLASSIFICATION OF INSTRUMENTATION AND CONTROL FUNCTIONS
IEEE 497-2010 IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
06/30123954 DC : DRAFT MAR 2006
IEEE C37.10.1-2000 IEEE Guide for the Selection of Monitoring for Circuit Breakers
IEEE DRAFT C37.10-1 : D4.0 JULY 2000 DRAFT GUIDE FOR THE SELECTION OF MONITORING FOR CIRCUIT BREAKERS
06/30109242 DC : DRAFT SEP 2006 ISO 20815 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT
UNE-EN 60300-3-15:2013 Dependability management -- Part 3-15: Application guide - Engineering of system dependability
BS EN 62282-5-1:2012 Fuel cell technologies Portable fuel cell power systems. Safety
BS EN 62282-6-100 : 2010 FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY
CEI EN 62628 : 2013 GUIDANCE ON SOFTWARE ASPECTS OF DEPENDABILITY
BS IEC 60300-3.10 : 2001 DEPENDABILITY MANAGEMENT - PART 3-10: APPLICATION GUIDE - MAINTAINABILITY
BS 5724-1.4(1997) : 1997 MEDICAL ELECTRICAL EQUIPMENT - PART 1-4: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD - GENERAL REQUIREMENTS FOR PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS
11/30201416 DC : DRAFT DEC 2011 BS EN 61924-2 - MARITIME NAVIGATION AND RADIO COMMUNICATION EQUIPMENT AND SYSTEMS - INTEGRATED NAVIGATION SYSTEMS (INS) - PART 2: MODULAR STRUCTURE FOR INS. OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS
14/30273218 DC : 0 BS ISO 13381-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - PROGNOSTICS - PART 1: GENERAL GUIDELINES
12/30265031 DC : 0 BS EN 60825-12 ED.2 - SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION
BS ISO 13379-1:2012 Condition monitoring and diagnostics of machines. Data interpretation and diagnostics techniques General guidelines
BS EN 60706-2:2006 Maintainability of equipment Maintainability requirements and studies during the design and development phase
PD CLC/TR 50126-2:2007 Railway applications. The specification and demonstration of reliability, availability, maintainability and safety (RAMS) Guide to the application of EN 50126-1 for safety
BS EN 62429:2008 Reliability growth. Stress testing for early failures in unique complex systems
PD IEC/TR 62721:2012 Reliability of devices used in fibre optic systems. General and guidance
BS IEC 62198:2001 Project risk management. Application guidelines
BS IEC 60300-3.5 : 2001 DEPENDABILITY MANAGEMENT - PART 3-5: APPLICATION GUIDE - RELIABILITY TEST CONDITIONS AND STATISTICAL TEST PRINCIPLES
I.S. EN 62551:2012 ANALYSIS TECHNIQUES FOR DEPENDABILITY - PETRI NET TECHNIQUES (IEC 62551:2012 (EQV))
BS ISO 15378 : 2006 AMD 17315 PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
UNE-EN 62628:2015 Guidance on software aspects of dependability
DIN EN ISO 13408-1:2015-12 ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 13408-1:2008, INCLUDING AMD 1:2013)
UNE-EN 62551:2014 Analysis techniques for dependability - Petri net techniques
05/30076956 DC : 0 BS EN 12445 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - TEST METHODS
I.S. EN 50156-2:2015 ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS
17/30341578 DC : DRAFT MAY 2017 BS ISO 17359 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES
BS EN 60300-3-12:2011 Dependability management Application guide. Integrated logistic support
CSA E61496.1 :2004 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
BS EN 61069-5:2016 Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment Assessment of system dependability
IEEE 1413.1 : 2002 SELECTING AND USING RELIABILITY PREDICTIONS BASED ON IEEE 1413
BS EN 61907:2010 Communication network dependability engineering
03/118789 DC : DRAFT DEC 2003 IEC 60706-2 - MAINTAINABILITY OF EQUIPMENT - PART 2: MAINTAINABILITY REQUIREMENTS AND STUDIES DURING THE DESIGN AND DEVELOPMENT PHASE
BS EN 61209:1999 Maritime navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). Operational and performance requirements, methods of testing and required test results
CSA CEI/IEC 300.3.9 : 1997 DEPENDABILITY MANAGEMENT - PART 3: APPLICATION GUIDE - SECTION 9: RISK ANALYSIS OF TECHNOLOGICAL SYSTEMS
ANSI/AAMI/ISO 16142-2:2017 MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
BS 6548-4:1993 Maintainability of equipment Guide to the planning of maintenance and maintenance support
BS ISO/IEC 16085:2006 Systems and software engineering. Life cycle processes. Risk management
94/408162 DC : DRAFT MAR 94 THE RELIABILITY CENTRED MAINTENANCE (RCM) STANDARD [IEC CD 56 (SECRETARIAT)394]
CEI EN 60706-2 : 2006 MAINTAINABILITY OF EQUIPMENT - PART 2: MAINTAINABILITY REQUIREMENTS AND STUDIES DURING THE DESIGN AND DEVELOPMENT PHASE
CEI EN 61508-7 : 2011 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETYRELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
I.S. EN ISO 80079-36:2016 EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO/DIS 80079-36:2014)
CSA ISO/IEC 16085 : 2007 : R2012 SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
CEI EN 60300-3-11 : 2011 DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTRED MAINTENANCE
BS EN 62308:2006 Equipment reliability. Reliability assessment methods
CLC/TR 62662:2011 Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials
CEI EN 62402 : 2008 OBSOLESCENCE MANAGEMENT - APPLICATION GUIDE
IEC 61882:2016 RLV Hazard and operability studies (HAZOP studies) - Application guide
CSA C60044-8 : 2007 : R2011 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
IEC 61497:1998 Nuclear power plants - Electrical interlocks for functions important to safety - Recommendations for design and implementation
EN 61226:2010 Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions
BS EN ISO 13408-1:2015 Aseptic processing of health care products General requirements
CEI EN 61924-2 : 2014 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - INTEGRATED NAVIGATION SYSTEMS (INS) - PART 2: MODULAR STRUCTURE FOR INS - OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS
I.S. EN 60300-3-11:2009 DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTRED MAINTENANCE
I.S. EN 61924-2:2013 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - INTEGRATED NAVIGATION SYSTEMS - PART 2: MODULAR STRUCTURE FOR INS - OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS (IEC 61924-2:2012 (EQV))
I.S. EN 62282-3-1:2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS EN 61496-1:2013 Safety of machinery. Electro-sensitive protective equipment General requirements and tests
I.S. EN 60300-3-2:2005 DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
UNE-EN 60300-3-11:2013 Dependability management -- Part 3-11: Application guide - Reliability centred maintenance
ISO/TR 16335:2013 Corrosion of metals and alloys Corrosion tests in artificial atmospheres Guidelines for selection of accelerated corrosion test for product qualification
I.S. EN 62508:2010 GUIDANCE ON HUMAN ASPECTS OF DEPENDABILITY
CSA ISO/IEC TR 15026-1 : 2013 SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 1: CONCEPTS AND VOCABULARY
EN 16991:2018 Risk-based inspection framework
BS EN 50129:2003 Railway applications. Communication, signalling and processing systems. Safety related electronic systems for signalling
ASTM E 2352 : 2019 Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments—Cleanroom Operations
ASTM E 2352 : 2004 Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations
ISO/IEC TR 15026-1:2010 Systems and software engineering Systems and software assurance Part 1: Concepts and vocabulary
CSA ISO/IEC 15026-1 : 2015 SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 1: CONCEPTS AND VOCABULARY
ISO 14971:2007 Medical devices Application of risk management to medical devices
EN 60987:2015 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
ASTM E 2476 : 2016 : REDLINE Standard Guide for Risk Assessment and Risk Control as it Impacts the Design, Development, and Operation of PAT Processes for Pharmaceutical Manufacture
CEI UNI EN ISO 14971 : 2013 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
IEC 63147:2017 Criteria for accident monitoring instrumentation for nuclear power generating stations
IEC PAS 62282-6-150:2011 Fuel cell technologies - Part 6-150: Micro fuel cell power systems - Safety - Water reactive (UN Devision 4.3) compounds in indirect PEM fuel cells
ISO 8468:2007 Ships and marine technology — Ship's bridge layout and associated equipment — Requirements and guidelines
IEC TR 62721:2012 Reliability of devices used in fibre optic systems - General and guidance
I.S. EN 60300-2:2004 DEPENDABILITY MANAGEMENT - PART 2: GUIDELINES FOR DEPENDABILITY MANAGEMENT
I.S. EN ISO 14971:2012 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007, CORRECTED VERSION 2007-10-01)
DIN EN ISO 14971:2013-04 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007)
DIN EN ISO 80079-36 E : 2016 EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO 80079-36:2016)
ISO 80079-36:2016 Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements
IEC 61508-7:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508)
EN 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
BS EN 1441:1998 Medical devices. Risk analysis
BS EN ISO 13849-2:2012 Safety of machinery. Safety-related parts of control systems Validation
UNE-EN 61508-7:2011 Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 7: Overview of techniques and measures
BS EN ISO 14698-1:2003 Cleanrooms and associated controlled environments. Biocontamination control General principles and methods
IEC 62508:2010 Guidance on human aspects of dependability
I.S. EN ISO 13849-2:2012 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
I.S. EN ISO 14224:2016 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016)
ANSI/CSA NGV 5.1-2016 (R2020) Residential fueling appliances
I.S. EN 14143:2013 RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS
ANSI B11 TR3 : 2000 RISK ASSESSMENT AND RISK REDUCTION - A GUIDE TO ESTIMATE, EVALUATE AND REDUCE RISKS ASSOCIATED WITH MACHINE TOOLS
I.S. EN 62282-2:2012 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV))
I.S. EN 60825-2:2004 SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS)
I.S. EN ISO 13849-1:2015 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
CEI EN 62282-2 : 2013 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
CSA NGV 5.1 : 2016 RESIDENTIAL FUELING APPLIANCES
I.S. EN ISO 14698-1:2003 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS
VDI 4068 Blatt 1:2016-03 Competent persons - Qualification criteria and commissioning
IEC 61882:2016 Hazard and operability studies (HAZOP studies) - Application guide
VDI 4007:2012-06 Reliability goals - Determination, check, review, certificate
VDI 4002 Blatt 2:2011-09 Reliability Engineer - Requirements for qualification
VDI/VDE 3516 Blatt 1:1978-10 Process analytical equipment
BS 5760-2:1994 Reliability of systems, equipment and components Guide to the assessment of reliability
VDI/VDE 3528 Blatt 1:2017-06 Requirements of commercial grade products and criteria for their use in the instrumentation and control systems important to safety in nuclear power plants - General part
I.S. EN 61078:2016 RELIABILITY BLOCK DIAGRAMS
BS EN 61869-6:2016 Instrument transformers Additional general requirements for low-power instrument transformers
BS EN 62673:2013 Methodology for communication network dependability assessment and assurance
I.S. EN 60987:2015 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - HARDWARE DESIGN REQUIREMENTS FOR COMPUTER-BASED SYSTEMS
PD ISO/TS 18667:2018 Space systems. Capability-based Safety, Dependability, and Quality Assurance (SD&QA) programme management
BS EN 62506:2013 Methods for product accelerated testing
PD IEC/TR 62987:2015 Nuclear power plants. Instrumentation and control systems important to safety. Use of Failure Mode and Effects Analysis (FMEA) and related methods to support the justification of systems
ISO 16142-1:2016 Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
12/30268377 DC : 0 BS EN 50156-2 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS
16/30346333 DC : 0 BS EN 61162-460 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS -DIGITAL INTERFACES - PART 460: MULTIPLE TALKERS AND MULTIPLE LISTENERS - ETHERNET INTERCONNECTION - SAFETY AND SECURITY
13/30293679 DC : 0 BS EN 62619 - SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR SECONDARY LITHIUM CELLS AND BATTERIES, FOR USE IN INDUSTRIAL APPLICATIONS
BS EN 60825-12:2004 Safety of laser products Safety of free space optical communication systems used for transmission of information
04/30066208 DC : DRAFT DEC 2004 ISO 14224 - PETROLEUM AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT
ISO/TS 17929:2014 Biomechanical effects on amusement ride passengers
CEI EN 62429 : 2008 RELIABILITY GROWTH - STRESS TESTING FOR EARLY FAILURES IN UNIQUE COMPLEX SYSTEMS
I.S. EN 1050:1997 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
13/30268559 DC : 0 BS ISO/IEC 15026-1 - SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 1: CONCEPTS AND VOCABULARY
12/30187831 DC : 0 BS EN 50126-1 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
DIN ISO 17359:2011-09 CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES
ISO 20780:2018 Space systems — Fiber optic components — Design and verification requirements
BS ISO 12132:2017 Plain bearings. Quality assurance of thin-walled half bearings. Design FMEA
PREN 50156-2 : DRAFT 2012 ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS
BS IEC/TR 61838:2001 Nuclear power plants. Use of probabilistic safety asessment for the classification of instrumentation and control functions
IEEE 15026-3-2013 IEEE Standard Adoption of ISO/IEC 15026-3 -- Systems and Software Engineering -- Systems and Software Assurance -- Part 3: System Integrity Levels
PD CLC/TR 62662:2011 Measurement procedures for materials used in photovoltaic modules Encapsulants. Test procedure of optical durability
CEI EN 62502 : 2012 ANALYSIS TECHNIQUES FOR DEPENDABILITY - EVENT TREE ANALYSIS (ETA)
PD IEC/TR 61838:2009 Nuclear power plants. Instrumentation and control important to safety. Use of probabilistic safety assessment for the classification of functions
16/30354071 DC : 0 BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS EN 61924-2:2013 Maritime navigation and radiocommunication equipment and systems. Integrated navigation systems Modular structure for INS. Operational and performance requirements, methods of testing and required test results
CSA CEI/IEC 300.2 : 0 DEPENDABILITY MANAGEMENT - PART 2: DEPENDABILITY PROGRAMME ELEMENTS AND TASKS
NF EN 50495 : 2010 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
BS EN 60300-2:2004 Dependability management Guidelines for dependability management
08/30169896 DC : 0 BS EN 61907 - GUIDANCE ON COMMUNICATION NETWORK DEPENDABILITY ENGINEERING
BS ISO 16142-1:2016 Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
14/30290166 DC : 0 BS ISO 16142-1 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 1: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL NON-IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
PD IEC TR 62059-21:2002 Electricity metering equipment. Dependability Collection of meter dependability data from the field
CEI 56-42 : 2000 DEPENDABILITY MANAGEMENT - PART 3: APPLICATION GUIDE - SECTION 9: RISK ANALYSIS OF TECHNOLOGICAL SYSTEMS
CEI EN 62282-3-100 : 2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS EN 62508:2010 Guidance on human aspects of dependability
17/30329294 DC : 0 BS ISO 20780 - SPACE SYSTEMS - FIBER OPTIC COMPONENTS - DESIGN AND VERIFICATION REQUIREMENTS
BS ISO 8468:2007 Ships and marine technology. Ship\'s bridge layout and associated equipment. Requirements and guidelines
02/400715 DC : DRAFT SEP 2002 BS IEC 60300-2 - DEPENDABILITY MANAGEMENT - PART 2: GUIDELINES FOR DEPENDABILITY MANAGEMENT
04/30101036 DC : DRAFT AUG 2004 IEC 61025 - FAULT TREE ANALYSIS (FTA)
BS EN 60300-3-15:2009 Dependability management Application guide. Engineering of system dependability
16/30335706 DC : 0 BS ISO 12132 - PLAIN BEARINGS - QUALITY ASSURANCE OF THIN-WALLED HALF BEARINGS - DESIGN FMEA
CEI EN 60825-12 : 2005 SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION
API RP 17N : 2017 RECOMMENDED PRACTICE ON SUBSEA PRODUCTION SYSTEM RELIABILITY, TECHNICAL RISK, AND INTEGRITY MANAGEMENT
BS ISO 21789:2009 Gas turbine applications — Safety
08/30193478 DC : DRAFT NOV 2008 BS EN 61508-7 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
CSA E61496.1 : 2004 : R2013 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
04/30115151 DC : DRAFT JUNE 2004 ISO/IEC 16085 - SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES - RISK MANAGEMENT
IEC 60300-3-11:2009 Dependability management - Part 3-11: Application guide - Reliability centred maintenance
07/30090385 DC : 0 ISO 13408-1 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS
CSA ISO/IEC 16085 : 2007 : R2017 SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
SAE ARP 5580 : 2012 RECOMMENDED FAILURE MODES AND EFFECTS ANALYSIS (FMEA) PRACTICES FOR NON-AUTOMOBILE APPLICATIONS
NF EN 60044-8 : 2006 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSDUCERS
CSA C60044-8 :2007 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
IEEE 1827-2016 IEEE Guide for Electrical and Control Design of Hydroelectric Water Conveyance Facilities
SAE JA 1005 : 2012 SOFTWARE SUPPORTABILITY PROGRAM IMPLEMENTATION GUIDE
IEC TR 80002-1:2009 Medical device software - Part 1: Guidance on the application of ISO 14971 to medical device software
CSA/ANSI NGV 5.2-2017 Vehicle fueling appliances (VFA)
IEC TR 61838:2009 Nuclear power plants - Instrumentation and control important to safety - Use of probabilistic safety assessment for the classification of functions
ISO 15378:2017 Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
I.S. EN 61162-460:2015 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 460: MULTIPLE TALKERS AND MULTIPLE LISTENERS - ETHERNET INTERCONNECTION - SAFETY AND SECURITY
I.S. EN 60825-12:2004 SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION
I.S. EN 16991:2018 RISK-BASED INSPECTION FRAMEWORK
I.S. EN 62619:2017 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR SECONDARY LITHIUM CELLS AND BATTERIES, FOR USE IN INDUSTRIAL APPLICATIONS
I.S. EN 62673:2013 METHODOLOGY FOR COMMUNICATION NETWORK DEPENDABILITY ASSESSMENT AND ASSURANCE (IEC 62673:2013 (EQV))
I.S. EN 60706-2:2006 MAINTAINABILITY OF EQUIPMENT - PART 2: MAINTAINABILITY REQUIREMENTS AND STUDIES DURING THE DESIGN AND DEVELOPMENT PHASE
I.S. EN ISO 20815:2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT
I.S. EN 61025:2007 FAULT TREE ANALYSIS (FTA)
ISO 19372:2015 Microturbines applications — Safety
ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Part 1: Safety
ASTM E 2352 : 2004 : R2010 Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations
BS EN ISO 14971:2012 Medical devices. Application of risk management to medical devices
IEC 62619:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications
ISO/IEC 16085:2006 Systems and software engineering Life cycle processes Risk management
S.R. CLC/TR 50126-2:2007 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 2: GUIDE TO THE APPLICATION OF EN 50126-1 FOR SAFETY
ISO 21789:2009 Gas turbine applications — Safety
IEC 61078:2016 Reliability block diagrams
I.S. EN 14594:2005 RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING
I.S. EN 60300-3-12:2011 DEPENDABILITY MANAGEMENT - PART 3-12: APPLICATION GUIDE - INTEGRATED LOGISTIC SUPPORT
DIN EN ISO 14644-5:2005-03 Cleanrooms and associated controlled environments - Part 5: Operations (ISO 14644-5:2004)
DIN EN 14143:2013-10 RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS
IEC 60300-3-15:2009 Dependability management - Part 3-15: Application guide - Engineering of system dependability
ISO 14644-5:2004 Cleanrooms and associated controlled environments — Part 5: Operations
IEC 60044-8:2002 Instrument transformers - Part 8: Electronic current transformers
ISO 14224:2016 Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment
UNE-EN 60300-3-12:2014 Dependability management - Part 3-12: Application guide - Integrated logistic support
IEC 62282-5-1:2012 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
IEC 62506:2013 Methods for product accelerated testing
GEIA TA HB 0009 : 2013 RELIABILITY PROGRAM HANDBOOK
CSA N290.14 : 2015 QUALIFICATION OF DIGITAL HARDWARE AND SOFTWARE FOR USE IN INSTRUMENTATION AND CONTROL APPLICATIONS FOR NUCLEAR POWER PLANTS
EEMUA 222 : 2009 GUIDE TO THE APPLICATION OF IEC 61511 TO SAFETY INSTRUMENTED SYSTEMS IN THE UK PROCESS INDUSTRIES
EN 61496-1:2013/AC:2015 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
EN ISO 14698-1 : 2003 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS
UNI EN 14143 : 2013 RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS
UNI CEN ISO/TS 22367 : 2010 MEDICAL LABORATORIES - REDUCTION OF ERROR THROUGH RISK MANAGEMENT AND CONTINUAL IMPROVEMENT
UNI EN ISO 13849-2 : 2013 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
EN 31010:2010 Risk management - Risk assessment techniques
UNI ISO 13379 : 2010 CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES ON DATA INTERPRETATION AND DIAGNOSTICS TECHNIQUES
BS ISO 18322:2017 Space systems. General management requirements for space test centres
PD ISO/TR 16335:2013 Corrosion of metals and alloys. Corrosion tests in artificial atmospheres. Guidelines for selection of accelerated corrosion test for product qualification
16/30337806 DC : 0 BS EN 16991 - RISK BASED INSPECTION FRAMEWORK (RBIF)
04/30105027 DC : DRAFT JUNE 2004 ISO 21789 - GAS TURBINES - SAFETY
CEI EN 60044-8 : 2004 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS
15/30310506 DC : 0 BS EN 61078 - RELIABILITY BLOCK DIAGRAMS
AAMI/IEC TIR80002-1:2009 MEDICAL DEVICE SOFTWARE - PART 1: GUIDANCE ON THE APPLICATION OF ISO 14971 TO MEDICAL DEVICE SOFTWARE
BS ISO 16142-2:2017 Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards
PREN ISO 13849-2 : DRAFT 2010 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
UNE-EN 62282-3-1:2011 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
BS EN 62282-3-1:2007 Fuel cell technologies Stationary fuel cell power systems. Safety
BS EN 61508-7:2010 Functional safety of electrical/electronic/ programmable electronic safety related systems Overview of techniques and measures
10/30230297 DC : 0 BS ISO/IEC 15026-3 - SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 3: SYSTEM INTEGRITY LEVELS
11/30251566 DC : 0 BS EN 62628 - GUIDANCE ON SOFTWARE ASPECTS OF DEPENDABILITY
08/30182164 DC : DRAFT MAY 2008 BS ISO 31000 - RISK MANAGEMENT - PRINCIPLES AND GUIDELINES ON IMPLEMENTATION
07/30144132 DC : 0 BS EN 60300-3-11 - DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTERED MAINTENANCE
PREN 50126-1 : DRAFT 2015 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
BS PD IEC/TR 62662 : 2010 GUIDANCE FOR PRODUCTION, TESTING AND DIAGNOSTICS OF POLYMER INSULATORS WITH RESPECT TO BRITTLE FRACTURE OF CORE MATERIALS
BS EN 62551:2012 Analysis techniques for dependability. Petri net techniques
16/30339594 DC : DRAFT DEC 2016 BS EN 50129 - RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING
DD IEC/PAS 62282-6-150:2011 Fuel cell technologies Micro fuel cell power systems. Safety. Water reactive (UN Division 4.3) compounds in indirect PEM fuel cells
API 14A : 2015 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
BS EN 61165:2006 Application of Markov techniques
BS IEC 61497:1998 Nuclear power plants. Electrical interlocks for functions important to safety. Recommendations for design and implementation
BS EN 60601-1-4:1997 Medical electrical equipment. General requirements for safety Collateral standard. General requirements for programmable electrical medical systems
I.S. EN 62402:2007 OBSOLESCENCE MANAGEMENT - APPLICATION GUIDE
BS EN 61014:2003 Programmes for reliability growth
07/30144128 DC : 0 BS EN 60300-3-15 - DEPENDABILITY MANAGEMENT - PART 3-15: GUIDANCE TO ENGINEERING OF SYSTEM DEPENDABILITY
BS IEC 60987:2007 Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
BS EN 61025:2007 Fault tree analysis (FTA)
10/30200372 DC : 0 BS ISO 17359 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES
UNE-EN 61882:2017 Hazard and operability studies (HAZOP studies) - Application guide
CEI EN 60300-3-15 : 2011 DEPENDABILITY MANAGEMENT - PART 3-15: APPLICATION GUIDE - ENGINEERING OF SYSTEM DEPENDABILITY
BS EN 61882:2016 Hazard and operability studies (HAZOP studies). Application guide
BS IEC 61226 : 2009 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - CLASSIFICATION OF INSTRUMENTATION AND CONTROL FUNCTIONS
NF EN 61014 : 2003 PROGRAMMES FOR RELIABILITY GROWTH
15/30309554 DC : 0 BS EN 61882 - HAZARD AND OPERABILITY STUDIES (HAZOP STUDIES) - APPLICATION GUIDE
BS EN ISO 15378:2017 Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
BS EN 61162-460:2015 Maritime navigation and radiocommunication equipment and systems. Digital interfaces Multiple talkers and multiple listeners. Ethernet interconnection. Safety and security
CEI EN 60300-3-4 : 2010 DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS
I.S. EN 61427-2:2015 SECONDARY CELLS AND BATTERIES FOR RENEWABLE ENERGY STORAGE - GENERAL REQUIREMENTS AND METHODS OF TEST - PART 2: ON-GRID APPLICATIONS
01/208612 DC : DRAFT NOV 2001 IEC 60825-2 ED.3 - SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS
BS EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
EN 62619:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications
I.S. EN 31010:2010 RISK MANAGEMENT - RISK ASSESSMENT TECHNIQUES (IEC/ISO 31010:2009 (EQV))
01/122934 DC : DRAFT AUG 2001 BS EN ISO 14644-5 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 5: OPERATIONS
12/30263521 DC : 0 BS EN 62673 - METHODOLOGY FOR COMMUNICATION NETWORK DEPENDABILITY ASSESSMENT AND ASSURANCE
16/30297787 DC : 0 BS ISO 16079-1 - CONDITION MONITORING AND DIAGNOSTICS OF WIND TURBINES - PART 1: GENERAL GUIDELINES
BS ISO 13372:2012 Condition monitoring and diagnostics of machines. Vocabulary
DD ISO/TS 22367 : 2008 MEDICAL LABORATORIES - REDUCTION OF ERROR THROUGH RISK MANAGEMENT AND CONTINUAL IMPROVEMENT
PD IEC/TR 80002-1:2009 Medical device software Guidance on the application of ISO 14971 to medical device software
BS EN 62628:2012 Guidance on software aspects of dependability
BS EN 60300-3-14:2004 Dependability management Application guide - Maintenance and maintenance support
UNI CEI EN ISO 14971 : 2012 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
BS EN 60300-3-2:2005 Dependability management Application guide. Collection of dependability data from the field
01/712575 DC : DRAFT SEP 2001 ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEM - PART 2: VALIDATION
IEC TR 62059-21:2002 Electricity metering equipment - Dependability - Part 21: Collection of meter dependability data from the field
04/30086349 DC : DRAFT APR 2004 EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
ANSI/CSA FC 1:2014 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
09/30169892 DC : 0 BS EN 62502 - ANALYSIS TECHNIQUES FOR DEPENDABILITY - EVENT TREE ANALYSIS
AAMI ISO 13408-1 : 2008 : INC : AMD 1 : 2013 : R201100 ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS
PD ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
IEC TR 63039:2016 Probabilistic risk analysis of technological systems - Estimation of final event rate at a given initial state
BS EN 60300-3-1:2004 Dependability management. Application guide Analysis techniques for dependability. Guide on methodology
ISO 12132:2017 Plain bearings Quality assurance of thin-walled half bearings Design FMEA
AAMI ISO 13408-1:2008 ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS
PREN 17141 : DRAFT 2017 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL
CSA C22.2 No. 60601.1.4 : 2002 MEDICAL ELECTRICAL EQUIPMENT - PART 1-4: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS
AAMI ISO 14971 : 2007 : R2010 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
ISA TR12.21.01 : 2004 USE OF FIBER OPTIC SYSTEMS IN CLASS 1 HAZARDOUS (CLASSIFIED) LOCATIONS
I.S. EN 61907:2010 COMMUNICATION NETWORK DEPENDABILITY ENGINEERING
CEI CLC/TR 62662 : 2012 GUIDANCE FOR PRODUCTION, TESTING AND DIAGNOSTICS OF POLYMER INSULATORS WITH RESPECT TO BRITTLE FRACTURE OF CORE MATERIALS
API 691 : 2017 RISK-BASED MACHINERY MANAGEMENT
I.S. EN 61014:2003 PROGRAMMES FOR RELIABILITY GROWTH
IEEE C37.10-2011 REDLINE IEEE Guide for Investigation, Analysis, and Reporting of Power Circuit Breaker Failures
IEEE/ISO/IEC 16085-2006 ISO/IEC/IEEE International Standard - Systems and Software Engineering - Life Cycle Processes - Risk Management
EN 61078 : 1991 RELIABILITY BLOCK DIAGRAMS (IEC 61078:2016)
I.S. EN 61069-5:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 5: ASSESSMENT OF SYSTEM DEPENDABILITY
UNI EN ISO 20815 : 2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT
I.S. EN 61226:2010 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - CLASSIFICATION OF INSTRUMENTATION AND CONTROL FUNCTIONS
I.S. EN 62282-3-100:2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV))
ISO 17359:2018 Condition monitoring and diagnostics of machines — General guidelines
I.S. EN 62502:2010 ANALYSIS TECHNIQUES FOR DEPENDABILITY - EVENT TREE ANALYSIS (ETA)
S.R. CWA 15740:2008 RISK-BASED INSPECTION AND MAINTENANCE PROCEDURES FOR EUROPEAN INDUSTRY (RIMAP)
ISO 18322:2017 Space systems — General management requirements for space test centres
ISO 13379:2003 Condition monitoring and diagnostics of machines General guidelines on data interpretation and diagnostics techniques
CEI EN 61078 : 2006 ANALYSIS TECHNIQUES FOR DEPENDABILITY - RELIABILITY BLOCK DIAGRAM AND BOOLEAN METHODS
CEI EN 62673 : 2014 METHODOLOGY FOR COMMUNICATION NETWORK DEPENDABILITY ASSESSMENT AND ASSURANCE
S.R. ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
CEI EN 61025 : 2007 FAULT TREE ANALYSIS (FTA)
EN 14594:2018 Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking
ISO 13381-1:2015 Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines
EN ISO 20815:2010 Petroleum, petrochemical and natural gas industries - Production assurance and reliability management (ISO 20815:2008, Corrected version 2009-06-15)
I.S. EN ISO 15378:2017 PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2015, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) (ISO 15378:2017)
IEC TR 62662:2010 Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials
IEC 60987:2007+AMD1:2013 CSV Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
I.S. EN 62308:2006 EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS
IEC 60300-3-10:2001 Dependability management - Part 3-10: Application guide - Maintainability
S.R. CWA 15929:2009 BEST PRACTICES FOR THE DESIGN AND DEVELOPMENT OF CRITICAL INFORMATION SYSTEMS
IEC 60860:2014 Radiation protection instrumentation - Warning equipment for criticality accidents
12/30228018 DC : 0 BS EN 61557-15 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES AND FOR EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
13/30276640 DC : 0 BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY
UNE-EN 62429:2012 Reliability growth - Stress testing for early failures in unique complex systems
IEC 61907:2009 Communication network dependability engineering
BS EN ISO 14644-5:2004 Cleanrooms and associated controlled environments Operations
IEC 60300-3-2:2004 Dependability management - Part 3-2: Application guide - Collection of dependability data from the field
BS EN 12445:2001 Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Test methods
BS EN 62282-4-101:2014 Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks
IEC 62402:2007 Obsolescence management - Application guide
11/30242646 DC : DRAFT FEB 2011 BS EN 62282-2 - FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
IEC 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
ISO 14698-1:2003 Cleanrooms and associated controlled environments Biocontamination control Part 1: General principles and methods
IEC 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
BS ISO 19372:2015 Microturbines applications. Safety
BS EN 1050:1997 Safety of machinery. Principles for risk assessment
IEC 60706-2:2006 Maintainability of equipment - Part 2: Maintainability requirements and studies during the design and development phase
IEC 62502:2010 Analysis techniques for dependability - Event tree analysis (ETA)
IEC 61014:2003 Programmes for reliability growth
IEC 60601-1-4:1996+AMD1:1999 CSV Medical electrical equipment - Part 1-4: General requirements for safety - Collateral Standard: Programmable electrical medical systems
IEC 62628:2012 Guidance on software aspects of dependability
IEC 62282-6-100:2010+AMD1:2012 CSV Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety
IEC TS 62933-5-1:2017 Electrical energy storage (EES) systems - Part 5-1: Safety considerations for grid-integrated EES systems - General specification
UNE-EN 62282-5-1:2013 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
IEC 60825-12:2004 Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
IEC 62198:2013 Managing risk in projects - Application guidelines
IEC 60300-3-1:2003 Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology
IEC 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
UNE-ISO 16110-1:2015 Hydrogen generators using fuel processing technologies -- Part 1: Safety
ISO 22734-2:2011 Hydrogen generators using water electrolysis process Part 2: Residential applications
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
IEC 61025:2006 Fault tree analysis (FTA)
IEC 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
IEC 60300-3-14:2004 Dependability management - Part 3-14: Application guide - Maintenance and maintenance support
10/30173705 DC : DRAFT SEP 2010 BS EN 62282-5-1 - FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
CEI EN 50129 : 2004 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING
04/30089617 DC : DRAFT MARCH 2004
BS EN 14143:2013 Respiratory equipment. Self-contained re-breathing diving apparatus
16/30332627 DC : 0 BS EN 62932-2-2 ED 1.0 - FLOW BATTERY SYSTEMS FOR STATIONARY APPLICATIONS - PART 2-2: SAFETY REQUIREMENTS
IEC 60300-2:2004 Dependability management - Part 2: Guidelines for dependability management
IEC 61226:2009 Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions
BS EN ISO 13849-1:2015 Safety of machinery. Safety-related parts of control systems General principles for design
09/30150663 DC : 0 BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
IEC 61427-2:2015 Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 2: On-grid applications
16/30351274 DC : 0 BS EN 62933-5-1 - ELECTRICAL ENERGY STORAGE (ESS) SYSTEMS - PART 5-1: SAFETY CONSIDERATIONS RELATED TO GRID INTEGRATED ELECTRICAL ENERGY STORAGE (EES) SYSTEMS
UNE-EN ISO 13849-1:2016 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
BS ISO 22734-2:2011 Hydrogen generators using water electrolysis process Residential applications
IEC 61165:2006 Application of Markov techniques
BS EN 62282-2:2012 Fuel cell technologies Fuel cell modules
UNE-EN 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
UNE-EN 14143:2014 Respiratory equipment - Self-contained re-breathing diving apparatus
EN 62502 : 2010 ANALYSIS TECHNIQUES FOR DEPENDABILITY - EVENT TREE ANALYSIS (ETA)
DIN EN ISO 80079-36:2016-12 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
EN ISO 14644-5:2004 Cleanrooms and associated controlled environments - Part 5: Operations (ISO 14644-5:2004)
EN 14143:2013 Respiratory equipment - Self-contained re-breathing diving apparatus
EN ISO 13408-1:2015 Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008, including Amd 1:2013)
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
EN 1441 : 1997 MEDICAL DEVICES - RISK ANALYSIS
I.S. EN 50126-1:2017 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
RG.AERO 000721 : 2016 GENERAL RECOMMENDATIONS FOR THE BIT ARCHITECTURE IN AN INTEGRATED SYSTEM
CEI EN 60300-3-14 : 2005 DEPENDABILITY MANAGEMENT - PART 3-14: APPLICATION GUIDE - MAINTENANCE AND MAINTENANCE SUPPORT
BS IEC 63147:2017 Criteria for accident monitoring instrumentation for nuclear power generating stations
NF EN 60300-3-11 : 2010 DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTRED MAINTENANCE
API TR 1PER15K-1 : 2013 PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
BS IEC 60300-3.6 : 1997 DEPENDABILITY MANAGEMENT - APPLICATION GUIDE - SOFTWARE ASPECTS OF DEPENDABILITY
UNE-EN 60300-3-4:2011 Dependability management -- Part 3-4: Application guide - Guide to the specification of dependability requirements
NF EN 50156-2 : 2016 ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS
IEC TR 62987:2015 Nuclear power plants - Instrumentation and control systems important to safety - Use of Failure Mode and Effects Analysis (FMEA) and related methods to support the justification of systems
CEI EN 60300-3-1 : 2005 DEPENDABILITY MANAGEMENT - PART 3-1: APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY
14/30287226 DC : 0 BS EN ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
UNI ISO 13379-1 : 2012 CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - DATA INTERPRETATION AND DIAGNOSTICS TECHNIQUES - PART 1: GENERAL GUIDELINES
I.S. EN 62940:2017 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - INTEGRATED COMMUNICATION SYSTEM (ICS) - OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS
I.S. EN 14593-1:2005 RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING DEVICES WITH DEMAND VALVE - PART 1: DEVICES WITH A FULL FACE MASK - REQUIREMENTS, TESTING AND MARKING
BS ISO/IEC 15026-1:2013 Systems and software engineering. Systems and software assurance Concepts and vocabulary
I.S. EN ISO 13408-1:2015 ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 13408-1:2008, INCLUDING AMD 1:2013)
BIS IS 15474-3-11 : 2014 DEPENDABILITY MANAGEMENT - PART 3: APPLICATION GUIDE - SECTION 11: RELIABILITY CENTRED MAINTENANCE
10/30238615 DC : DRAFT NOV 2010 BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
S.R. CEN ISO TS 22367:2010 MEDICAL LABORATORIES - REDUCTION OF ERROR THROUGH RISK MANAGEMENT AND CONTINUAL IMPROVEMENT
05/30133969 DC : DRAFT MAY 2005
PD ISO/TS 17929:2014 Biomechanical effects on amusement ride passengers
BS IEC 61882:2001 Hazard and operability studies (HAZOP studies). Application guide
ISO/IEC 15026-1:2013 Systems and software engineering Systems and software assurance Part 1: Concepts and vocabulary
BS EN 60300-3-11:2009 Dependability management Application guide. Reliability centred maintenance
BS EN 62619:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for secondary lithium cells and batteries, for use in industrial applications
14/30298031 DC : 0 BS EN 61069-5 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 5: ASSESSMENT OF SYSTEM DEPENDABILITY
S.R. CLC/TR 62662:2011 GUIDANCE FOR PRODUCTION, TESTING AND DIAGNOSTICS OF POLYMER INSULATORS WITH RESPECT TO BRITTLE FRACTURE OF CORE MATERIALS (IEC/TR 62662:2010)
BS 5760-5:1991 Reliability of systems, equipment and components Guide to failure modes, effects and criticality analysis (FMEA and FMECA)
03/108624 DC : DRAFT JULY 2003 IEC 60300-3-2 - DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
15/30330403 DC : 0 BS EN 50126-1 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
04/30079743 DC : DRAFT APR 2004 ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000 WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
BS EN 62940:2017 Maritime navigation and radiocommunication equipment and systems. Integrated communication system (ICS). Operational and performance requirements, methods of testing and required test results
17/30329441 DC : 0 BS EN 17141 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL
96/124833 DC : DRAFT SEP 1996 BS EN ISO 14698-1 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES
CSA ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
BS EN 60300-3-4:2008 Dependability management Application guide. Guide to the specification of dependability requirements
IEC TS 62941:2016 Terrestrial photovoltaic (PV) modules - Guideline for increased confidence in PV module design qualification and type approval
CSA ISO 14971 : 2007 : R2017 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
CSA ISO 14971 : 2007 : R2012 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
ASTM D 7874 : 2013 Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing
ISO/TS 18667:2018 Space systems — Capability-based Safety, Dependability, and Quality Assurance (SD&QA) programme management
API 689 : 2007 COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT
CSA Q634 : M91 RISK ANALYSIS REQUIREMENTS & GUIDELINES
IEEE 1679-2010 IEEE Recommended Practice for the Characterization and Evaluation of Emerging Energy Storage Technologies in Stationary Applications
IEEE/ISO/IEC 15026-1-2014 IEEE Standard Adoption of ISO/IEC 15026-1--Systems and Software Engineering--Systems and Software Assurance--Part 1: Concepts and Vocabulary
ISO 20815:2008 Petroleum, petrochemical and natural gas industries Production assurance and reliability management
I.S. EN 61557-15:2014 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
CSA C22.2 No. 62282-2 :2007 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
I.S. EN 60300-3-4:2008 DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS
I.S. EN 50495:2010 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
I.S. EN 62198:2014 MANAGING RISK IN PROJECTS - APPLICATION GUIDELINES
I.S. EN 62429:2008 RELIABILITY GROWTH - STRESS TESTING FOR EARLY FAILURES IN UNIQUE COMPLEX SYSTEMS
EN 14593-1:2018 Respiratory protective devices - Compressed air line breathing devices with demand valve - Part 1: Devices with a full face mask - Requirements, testing and marking
I.S. EN 60300-3-1:2004 DEPENDABILITY MANAGEMENT - PART 3-1: APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY
ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
EN ISO 14971:2012 Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01)
IEC 60300-3-5:2001 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
IEC 60300-3-9:1995 Dependability management - Part 3: Application guide - Section 9: Risk analysis of technological systems
I.S. EN 61496-1:2013 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
IEC TS 62600-2:2016 Marine energy - Wave, tidal and other water current converters - Part 2: Design requirements for marine energy systems
I.S. EN 60300-3-14:2004 DEPENDABILITY MANAGEMENT - PART 3-14: APPLICATION GUIDE - MAINTENANCE AND MAINTENANCE SUPPORT
S.R. CR 954-100:1999 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 100: GUIDE ON THE USE AND APPLICATION OF EN 954-1:1996
EN 62282-6-100:2010/A1:2012 FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010/A1:2012)
DIN EN ISO 13849-1:2016-06 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
BS ISO 22734-1:2008 Hydrogen generators using water electrolysis process Industrial and commercial applications
IEC 62551:2012 Analysis techniques for dependability - Petri net techniques
IEC 62429:2007 Reliability growth - Stress testing for early failures in unique complex systems
ISO/TS 22367:2008 Medical laboratories Reduction of error through risk management and continual improvement
ISO 22734-1:2008 Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
IEC 62308:2006 Equipment reliability - Reliability assessment methods
16/30354067 DC : 0 BS EN 62282-5-100 - FUEL CELL TECHNOLOGIES - PART 5-100: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
IEC 61869-6:2016 Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers
IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
BS EN 60825-2 : 2004 SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS)
12/30236742 DC : 0 BS ISO/IEC 80079-36 - EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - BASIC METHODS AND REQUIREMENTS
BS EN ISO 14224:2016 Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
BS EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
IEC 62282-3-1:2007 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
IEC 60300-3-12:2011 Dependability management - Part 3-12: Application guide - Integrated logistic support
IEC 60300-3-4:2007 Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements
CEN ISO/TS 22367:2010 Medical laboratories - Reduction of error through risk management and continual improvement (ISO/TS 22367:2008, including Cor 1:2009)
EN 62551 : 2012 ANALYSIS TECHNIQUES FOR DEPENDABILITY - PETRI NET TECHNIQUES (IEC 62551:2012)
EN 61069-5:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability
CEN/TS 13763-27 : 2003 EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 27: DEFINITIONS, METHODS AND REQUIREMENTS FOR ELECTRONIC INITIATION SYSTEMS
UNE-ISO 22734-1:2012 Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications
EN 62282-5-1:2012 FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012)
EN 60300-3-14:2004 Dependability management - Part 3-14: Application guide - Maintenance and maintenance support
EN 60300-3-11 : 2009 DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTRED MAINTENANCE
EN 61508-7:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures
EN 62628:2012 Guidance on software aspects of dependability
EN 60300-3-1:2004 Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology
EN 50156-2:2015 Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for design, development and type approval of safety devices and subsystems
EN 60300-2:2004 Dependability management - Part 2: Guidelines for dependability management
EN 60044-8:2002 Instrument transformers - Part 8: Electronic current transformers
EN 61427-2:2015 Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 2: On-grid applications
EN 60825-12:2004 Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
EN 62198:2014 Managing risk in projects - Application guidelines
EN 60706-2:2006 Maintainability of equipment - Part 2: Maintainability requirements and studies during the design and development phase
EN 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
EN 61165:2006 Application of Markov techniques
EN 62508 : 2010 GUIDANCE ON HUMAN ASPECTS OF DEPENDABILITY
EN 61014 : 2003 Programmes for reliability growth

IEC 61025:2006 Fault tree analysis (FTA)
SAE ARP 5580 : 2012 RECOMMENDED FAILURE MODES AND EFFECTS ANALYSIS (FMEA) PRACTICES FOR NON-AUTOMOBILE APPLICATIONS
AS 4024.1100:2019 Safety of machinery Application guide
IEC 61160:2005 Design review
IEC 61078:2016 Reliability block diagrams
IEC 61165:2006 Application of Markov techniques
AS ISO 22367:2021 Medical laboratories - Application of risk management to medical laboratories
AS/NZS IEC 31010:2020 Risk management - Risk assessment techniques
SAE J 1739 : 2009 POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN DESIGN (DESIGN FMEA), POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN MANUFACTURING AND ASSEMBLY PROCESSES (PROCESS FMEA)
IEC 60300-3-1:2003 Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology
IEC 60300-1:2014 Dependability management - Part 1: Guidance for management and application
IEC 60300-3-11:2009 Dependability management - Part 3-11: Application guide - Reliability centred maintenance
IEC 60300-2:2004 Dependability management - Part 2: Guidelines for dependability management
IEC 60300-3-9:1995 Dependability management - Part 3: Application guide - Section 9: Risk analysis of technological systems
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
BS 5760-5:1991 Reliability of systems, equipment and components Guide to failure modes, effects and criticality analysis (FMEA and FMECA)

View more information
US$313.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.