• There are no items in your cart

IEC 61025:2006

Current
Current

The latest, up-to-date edition.

Fault tree analysis (FTA)
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English - French, English, French, Spanish, Castilian

Published date

12-13-2006

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definition
4 Symbols
5 General
  5.1 Fault tree description and structure
  5.2 Objectives
  5.3 Applications
  5.4 Combinations with other reliability analysis techniques
6 Development and evaluation
  6.1 General considerations
  6.2 Required system information
  6.3 Fault tree graphical description and structure
7 Fault tree development and evaluation
  7.1 General
  7.2 Scope of analysis
  7.3 System familiarization
  7.4 Fault tree development
  7.5 Fault tree construction
  7.6 Failure rates in fault tree analysis
8 Identification and labelling in a fault tree
9 Report
Annex A (informative) Symbols
Annex B (informative) Detailed procedure for disjointing
Bibliography

Describes fault tree analysis and provides guidance on its application to perform an analysis, identifies appropriate assumptions, events and failure modes, and provides identification rules and symbols.

Committee
TC 56
DevelopmentNote
Stability Date: 2017. (10/2012)
DocumentType
Standard
Pages
103
PublisherName
International Electrotechnical Committee
Status
Current
Supersedes

Standards Relationship
NF EN 61025 : 2007 Identical
NEN EN IEC 61025 : 2007 Identical
I.S. EN 61025:2007 Identical
PN EN 61025 : 2007 Identical
AS IEC 61025-2008 Identical
UNE-EN 61025:2011 Identical
BS EN 61025:2007 Identical
CEI EN 61025 : 2007 Identical
EN 61025:2007 Identical
DIN EN 61025:2007-08 Identical
IS/IEC 61025 : 2006 Identical
CEI 56-31 : 1ED 2000 Identical
DIN IEC 61025:1993-12 Identical
UTEC 20 318 : 1990 Identical
UNE 21925:1994 Identical
HD 617 : 200S1 Corresponds
UNE-EN 61025:2007 Identical

I.S. EN 50126-1:2017 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
I.S. EN 50129:2003 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING
DD CEN ISO/TS 22367:2010 Medical laboratories. Reduction of error through risk management and continual improvement
CEI 56-46 : 2005 DEPENDABILITY MANAGEMENT - PART 3-5: APPLICATION GUIDE - RELIABILITY TEST CONDITIONS AND STATISTICAL TEST PRINCIPLES
PD IEC/TR 63039:2016 Probabilistic risk analysis of technological systems. Estimation of final event rate at a given initial state
BS EN 61427-2:2015 Secondary cells and batteries for renewable energy storage. General requirements and methods of test On-grid applications
14/30267079 DC : 0 BS EN 62740 - ROOT CAUSE ANALYSIS (RCA)
BS EN 31010:2010 Risk management. Risk assessment techniques
BS EN 61069-5:2016 Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment Assessment of system dependability
BS EN 61800-5-2:2017 Adjustable speed electrical power drive systems Safety requirements. Functional
BS ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Safety
BS EN 60601-1-4:1997 Medical electrical equipment. General requirements for safety Collateral standard. General requirements for programmable electrical medical systems
CEI EN 61131-6 : 2013 PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY
BS EN 62429:2008 Reliability growth. Stress testing for early failures in unique complex systems
CLC/TS 62603-1:2014 Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications
UNE-EN 61907:2013 Communication network dependability engineering
CEI EN 61869-6 : 1ED 2017 INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
10/30235503 DC : 0 BS EN 61496-1 AMD 2 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
10/30198892 DC : 0 BS EN ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
13/30279579 DC : 0 BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
DD CEN/TS 13763-27:2003 Explosives for civil uses. Detonators and relays Definitions, methods and requirements for electronic initiation systems
CSA Q636 : 0 GUIDELINES AND REQUIREMENTS FOR RELIABILITY ANALYSIS METHODS
BS EN 61165:2006 Application of Markov techniques
CEI EN 61014 : 2006 PROGRAMMES FOR RELIABILITY GROWTH
14/30287226 DC : 0 BS EN ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
API 689 : 2007 COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT
05/30134150 DC : DRAFT MAY 2005 EN 15233 - METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
BS EN 62502:2011 Analysis techniques for dependability. Event tree analysis (ETA)
BS EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
16/30320052 DC : 0 BS ISO 26262-10 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 10: GUIDELINE ON ISO 26262
BS EN 60300-3-15:2009 Dependability management Application guide. Engineering of system dependability
BS EN 62282-3-100:2012 Fuel cell technologies Stationary fuel cell power systems. Safety
BS EN 61078:2016 Reliability block diagrams
17/30337986 DC : 0 BS EN ISO 20815 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT
CEI EN 61907 : 2011 COMMUNICATION NETWORK DEPENDABILITY ENGINEERING
10/30175182 DC : 0 BS EN 62551 - ANALYSIS TECHNIQUES FOR DEPENDABILITY - PETRI NET MODELLING
05/30101071 DC : DRAFT FEB 2005
CSA ISO/TR 10017 : 2003 : R2013 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
CEI EN 60300-3-2 : 2006 DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
CSA ISO 14971 : 2007 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
CSA ISO/IEC 16085 : 2007 SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
I.S. EN 60044-8:2002 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
CEI EN 50495 : 2011 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
CSA C60044-8 : 2007 : R2016 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
SAE J 1211 : 2012 HANDBOOK FOR ROBUSTNESS VALIDATION OF AUTOMOTIVE ELECTRICAL/ELECTRONIC MODULES
ANSI FC 1 : 2012 STATIONARY FUEL CELL POWER SYSTEMS
CEI EN 62308 : 2010 EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS
GOST ISO 14698-1 : 2005 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS
CSA HPIT 2-2017 Dispensing systems and components for fueling hydrogen powered industrial trucks
PD ISO/IEC/TR 15026-1:2010 Systems and software engineering. Systems and software assurance Concepts and vocabulary
CSA C22.2 No. 62282-2 : 2007 : R2013 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
EN 50126-1:2017 Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Generic RAMS Process
I.S. EN 61869-6:2016 INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
I.S. EN 62282-6-100:2010 FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010 (EQV))
I.S. EN 61508-7:2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
I.S. EN 61882:2016 HAZARD AND OPERABILITY STUDIES (HAZOP STUDIES) - APPLICATION GUIDE
NF ISO 16110-1 : 2009 HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY
CCS GUIDE FOR SAFETY AND RELIABILITY : 2017 GUIDE FOR SAFETY AND RELIABILITY ASSESSMENT FOR SHIPBOARD SOFTWARE
I.S. EN 60300-3-15:2009 DEPENDABILITY MANAGEMENT - PART 3-15: APPLICATION GUIDE - ENGINEERING OF SYSTEM DEPENDABILITY
I.S. EN 61165:2006 APPLICATION OF MARKOV TECHNIQUES
EN ISO 80079-36:2016 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
DIN EN ISO 14698-1 E : 2004 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS
DIN EN ISO 13849-2:2013-02 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
PD IEC/TS 62861:2017 Guidelines for principal component reliability testing for LED light sources and LED luminaires
UNE-EN ISO 13849-2:2013 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
05/30060689 DC : DRAFT JUN 2005 IEC 62282-3-1 - FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER PLANTS - SAFETY
IEC 61069-5:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability
IEC 61508-6:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508)
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
CLC/TR 50126-2:2007 Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 2: Guide to the application of EN 50126-1 for safety
EN 62282-3-1 : 2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
EN 50129 : 2003 COR 2010 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING
EN 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
EN 60300-3-2 : 2005 Dependability management - Part 3-2: Application guide - Collection of dependability data from the field
EN 61131-6:2012 Programmable controllers - Part 6: Functional safety
EN 60300-3-15 : 2009 DEPENDABILITY MANAGEMENT - PART 3-15: APPLICATION GUIDE - ENGINEERING OF SYSTEM DEPENDABILITY
EN 60300-3-4:2008 Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements
EN 62429:2008 Reliability growth - Stress testing for early failures in unique complex systems
IEC 61511-2:2016 RLV Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016
EN 61508-6:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3
EN 61869-6:2016 Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers
EN 61882:2016 Hazard and operability studies (HAZOP studies) - Application guide
EN 61907:2010 Communication network dependability engineering
EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
EN 61800-5-2:2017 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
EN 62740:2015 Root cause analysis (RCA)
DIN EN ISO 14698-1:2004-04 Cleanrooms and associated controlled environments - Biocontamination control - Part 1: General principles and methods (ISO 14698-1:2003)
EN 62308 : 2006 EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS
EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
DEFSTAN 00-56(PT2)/2(1996) : 1996 SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE
IEC 61800-5-2 REDLINE : 2ED 2016 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
CEI 56-53 : 2006 DEPENDABILITY MANAGEMENT - PART 3-10: APPLICATION GUIDE - MAINTAINABILITY
10/30189547 DC : 0 BS EN 62603 ED 1 - INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR EVALUATING THE PERFORMANCES OF PROCESS CONTROL SYSTEMS
UNE-EN 60300-3-15:2013 Dependability management -- Part 3-15: Application guide - Engineering of system dependability
UNE-EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
BS EN 62282-5-1:2012 Fuel cell technologies Portable fuel cell power systems. Safety
BS EN 61511-3:2017 Functional safety. Safety instrumented systems for the process industry sector Guidance for the determination of the required safety integrity levels
PD CEN ISO/TR 12489:2016 Petroleum, petrochemical and natural gas industries. Reliability modelling and calculation of safety systems
CEI EN 62628 : 2013 GUIDANCE ON SOFTWARE ASPECTS OF DEPENDABILITY
BS IEC 60300-3.10 : 2001 DEPENDABILITY MANAGEMENT - PART 3-10: APPLICATION GUIDE - MAINTAINABILITY
BS 5724-1.4(1997) : 1997 MEDICAL ELECTRICAL EQUIPMENT - PART 1-4: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD - GENERAL REQUIREMENTS FOR PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS
BS EN 61131-6:2012 Programmable controllers Functional safety
13/30278416 DC : 0 BS EN 61800-5-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
I.S. EN 16602-40-12:2014 SPACE PRODUCT ASSURANCE - FAULT TREE ANALYSIS - ADOPTION NOTICE ECSS/IEC 61025
BS EN 60706-2:2006 Maintainability of equipment Maintainability requirements and studies during the design and development phase
ISO/IEC 15026-1:2013 Systems and software engineering Systems and software assurance Part 1: Concepts and vocabulary
PD CLC/TS 62603-1:2014 Industrial process control systems. Guideline for evaluating process control systems Specifications
BS IEC 62198:2001 Project risk management. Application guidelines
BS IEC 60300-3.5 : 2001 DEPENDABILITY MANAGEMENT - PART 3-5: APPLICATION GUIDE - RELIABILITY TEST CONDITIONS AND STATISTICAL TEST PRINCIPLES
BS ISO 15378 : 2006 AMD 17315 PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
I.S. EN 62551:2012 ANALYSIS TECHNIQUES FOR DEPENDABILITY - PETRI NET TECHNIQUES (IEC 62551:2012 (EQV))
BS EN 61508-6:2010 Functional safety of electrical/electronic/ programmable electronic safety related systems Guidelines on the application of IEC 61508-2 and IEC 61508-3
UNE-EN 62628:2015 Guidance on software aspects of dependability
UNE-EN 62551:2014 Analysis techniques for dependability - Petri net techniques
BS EN 61511-1 : 2017 FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS (IEC 61511-1:2016 + COR1:2016)
CSA E61496.1 :2004 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
BS EN 61907:2010 Communication network dependability engineering
03/118789 DC : DRAFT DEC 2003 IEC 60706-2 - MAINTAINABILITY OF EQUIPMENT - PART 2: MAINTAINABILITY REQUIREMENTS AND STUDIES DURING THE DESIGN AND DEVELOPMENT PHASE
CSA CEI/IEC 300.3.9 : 1997 DEPENDABILITY MANAGEMENT - PART 3: APPLICATION GUIDE - SECTION 9: RISK ANALYSIS OF TECHNOLOGICAL SYSTEMS
CEI EN 60706-2 : 2006 MAINTAINABILITY OF EQUIPMENT - PART 2: MAINTAINABILITY REQUIREMENTS AND STUDIES DURING THE DESIGN AND DEVELOPMENT PHASE
CSA ISO/IEC 16085 : 2007 : R2012 SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
CEI EN 61508-7 : 2011 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETYRELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
I.S. EN ISO 80079-36:2016 EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO/DIS 80079-36:2014)
BS EN 62308:2006 Equipment reliability. Reliability assessment methods
UNE-EN ISO 15378:2016 Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO 15378:2015)
IEC 61882:2016 RLV Hazard and operability studies (HAZOP studies) - Application guide
I.S. EN 61511-1:2017 FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - NORMATIVE (UON) - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS
IEC 61800-5-2:2016 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
CSA C60044-8 : 2007 : R2011 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
BS EN 60044-8:2002 Instrument transformers Electronic current transformers
CAN/CSA-C22.2 NO. 61511-1:17 Functional safety — Safety instrumented systems for the process industry sector — Part 1: Framework, definitions, system, hardware and application programming requirements (Adopted IEC 61511-1:2016, second edition, 2016-02, with Canadian deviations) | Sécurité fonctionnelle — Systèmes instrumentes de sécurité pour le secteur des industries de transformation — Partie 1 : Cadre, définitions, exigences pour le système, le matériel et la programmation d’application (norme IEC 61511-1:2016 adoptée, deuxième édition, 2016-02, avec exigences propres au Canada)
IEC 61511-1 REDLINE : 2ED 2016 FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS
I.S. EN 62282-3-1:2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
I.S. EN 61703:2016 MATHEMATICAL EXPRESSIONS FOR RELIABILITY, AVAILABILITY, MAINTAINABILITY AND MAINTENANCE SUPPORT TERMS
BS EN 61496-1:2013 Safety of machinery. Electro-sensitive protective equipment General requirements and tests
I.S. EN 60300-3-2:2005 DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
CSA ISO/IEC TR 15026-1 : 2013 SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 1: CONCEPTS AND VOCABULARY
AAMI ISO 14971 : 2007 : INC : ERR 1 : 2007 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
BS EN 50129:2003 Railway applications. Communication, signalling and processing systems. Safety related electronic systems for signalling
ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Part 1: Safety
ASTM E 2352 : 2019 Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments—Cleanroom Operations
ASTM E 2352 : 2004 Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations
CSA ISO/IEC 15026-1 : 2015 SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 1: CONCEPTS AND VOCABULARY
EN 60987:2015 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
ASTM E 2476 : 2016 : REDLINE Standard Guide for Risk Assessment and Risk Control as it Impacts the Design, Development, and Operation of PAT Processes for Pharmaceutical Manufacture
IEC PAS 62282-6-150:2011 Fuel cell technologies - Part 6-150: Micro fuel cell power systems - Safety - Water reactive (UN Devision 4.3) compounds in indirect PEM fuel cells
I.S. EN ISO 14971:2012 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007, CORRECTED VERSION 2007-10-01)
DIN EN ISO 14971:2013-04 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007)
DIN EN ISO 80079-36 E : 2016 EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO 80079-36:2016)
ISO 80079-36:2016 Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements
IEC 61508-7:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508)
EN 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
BS EN ISO 13849-2:2012 Safety of machinery. Safety-related parts of control systems Validation
BS EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
BS EN 1441:1998 Medical devices. Risk analysis
UNE-EN 61508-7:2011 Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 7: Overview of techniques and measures
IEC 62625-2:2016 Electronic railway equipment - On board driving data recording system - Part 2: Conformity testing
BS EN ISO 14698-1:2003 Cleanrooms and associated controlled environments. Biocontamination control General principles and methods
IEC 61511-1:2016 RLV Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
I.S. EN ISO 13849-2:2012 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
I.S. EN ISO 17776:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - MAJOR ACCIDENT HAZARD MANAGEMENT DURING THE DESIGN OF NEW INSTALLATIONS (ISO 17776:2016)
I.S. EN ISO 14224:2016 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016)
ANSI/CSA NGV 5.1-2016 (R2020) Residential fueling appliances
ANSI B11 TR3 : 2000 RISK ASSESSMENT AND RISK REDUCTION - A GUIDE TO ESTIMATE, EVALUATE AND REDUCE RISKS ASSOCIATED WITH MACHINE TOOLS
I.S. EN 62282-2:2012 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV))
CEI EN 62282-2 : 2013 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
CSA NGV 5.1 : 2016 RESIDENTIAL FUELING APPLIANCES
I.S. EN ISO 14698-1:2003 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS
BS 5760-4:2003 Reliability of systems, equipment and components Guide to the specification of dependability requirements
IEC 61882:2016 Hazard and operability studies (HAZOP studies) - Application guide
VDI 4003:2007-03 Reliability management
VDI 4002 Blatt 2:2011-09 Reliability Engineer - Requirements for qualification
I.S. EN 61078:2016 RELIABILITY BLOCK DIAGRAMS
06/30109242 DC : DRAFT SEP 2006 ISO 20815 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT
15/30324519 DC : 0 BS EN ISO 14224 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT
PD ISO/TS 18667:2018 Space systems. Capability-based Safety, Dependability, and Quality Assurance (SD&QA) programme management
BS EN 60987:2015 Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
AAMI/IEC TIR80002-1:2009 MEDICAL DEVICE SOFTWARE - PART 1: GUIDANCE ON THE APPLICATION OF ISO 14971 TO MEDICAL DEVICE SOFTWARE
13/30293679 DC : 0 BS EN 62619 - SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR SECONDARY LITHIUM CELLS AND BATTERIES, FOR USE IN INDUSTRIAL APPLICATIONS
BS EN 62282-6-100 : 2010 FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY
04/30066208 DC : DRAFT DEC 2004 ISO 14224 - PETROLEUM AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT
BS EN 62740:2015 Root cause analysis (RCA)
CEI EN 62429 : 2008 RELIABILITY GROWTH - STRESS TESTING FOR EARLY FAILURES IN UNIQUE COMPLEX SYSTEMS
I.S. EN 1050:1997 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
BS EN 61511-2:2017 Functional safety. Safety instrumented systems for the process industry sector Guidelines for the application of IEC 61511-1
BS EN 50159:2010 Railway applications. Communication, signalling and processing systems. Safety-related communication in transmission systems
13/30268559 DC : 0 BS ISO/IEC 15026-1 - SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 1: CONCEPTS AND VOCABULARY
12/30187831 DC : 0 BS EN 50126-1 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
DIN ISO 17359:2011-09 CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES
BS IEC 60987:2007 Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
MIL-HDBK-502 Revision A:2013 Product Support Analysis
CEI EN 62502 : 2012 ANALYSIS TECHNIQUES FOR DEPENDABILITY - EVENT TREE ANALYSIS (ETA)
16/30354071 DC : 0 BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
CSA CEI/IEC 300.2 : 0 DEPENDABILITY MANAGEMENT - PART 2: DEPENDABILITY PROGRAMME ELEMENTS AND TASKS
NF EN 50495 : 2010 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
BS EN 60300-2:2004 Dependability management Guidelines for dependability management
08/30169896 DC : 0 BS EN 61907 - GUIDANCE ON COMMUNICATION NETWORK DEPENDABILITY ENGINEERING
S.R. CEN ISO/TR 12489:2016 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RELIABILITY MODELLING AND CALCULATION OF SAFETY SYSTEMS (ISO/TR 12489:2013)
03/118777 DC : DRAFT DEC 2003 IEC 60812 - ANALYSIS TECHNIQUES FOR SYSTEM RELIABILITY - PROCEDURE FOR FAILURE MODE AND EFFECTS ANALYSIS (FMEA)
CEI 56-42 : 2000 DEPENDABILITY MANAGEMENT - PART 3: APPLICATION GUIDE - SECTION 9: RISK ANALYSIS OF TECHNOLOGICAL SYSTEMS
CEI EN 62282-3-100 : 2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
17/30341578 DC : DRAFT MAY 2017 BS ISO 17359 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES
02/400715 DC : DRAFT SEP 2002 BS IEC 60300-2 - DEPENDABILITY MANAGEMENT - PART 2: GUIDELINES FOR DEPENDABILITY MANAGEMENT
ISO 20815:2008 Petroleum, petrochemical and natural gas industries Production assurance and reliability management
PD CLC/TR 50126-2:2007 Railway applications. The specification and demonstration of reliability, availability, maintainability and safety (RAMS) Guide to the application of EN 50126-1 for safety
BS ISO 21789:2009 Gas turbine applications — Safety
08/30193478 DC : DRAFT NOV 2008 BS EN 61508-7 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
CSA E61496.1 : 2004 : R2013 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
04/30115151 DC : DRAFT JUNE 2004 ISO/IEC 16085 - SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES - RISK MANAGEMENT
CSA ISO/IEC 16085 : 2007 : R2017 SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
NF EN 60044-8 : 2006 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSDUCERS
UNE-EN 62625-2:2017 Electronic railway equipment - On board driving data recording system - Part 2: Conformity testing
CSA C60044-8 :2007 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
IEC TR 63039:2016 Probabilistic risk analysis of technological systems - Estimation of final event rate at a given initial state
IEC TR 80002-1:2009 Medical device software - Part 1: Guidance on the application of ISO 14971 to medical device software
IEC 61511-3 REDLINE : 2.0 FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 3: GUIDANCE FOR THE DETERMINATION OF THE REQUIRED SAFETY INTEGRITY LEVELS
ISO 15378:2017 Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
EN 61078 : 1991 RELIABILITY BLOCK DIAGRAMS (IEC 61078:2016)
I.S. EN 50495:2010 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
I.S. EN 62619:2017 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR SECONDARY LITHIUM CELLS AND BATTERIES, FOR USE IN INDUSTRIAL APPLICATIONS
I.S. EN 50159:2010 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY-RELATED COMMUNICATION IN TRANSMISSION SYSTEMS
I.S. EN 60706-2:2006 MAINTAINABILITY OF EQUIPMENT - PART 2: MAINTAINABILITY REQUIREMENTS AND STUDIES DURING THE DESIGN AND DEVELOPMENT PHASE
EN ISO 15378:2017 Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017)
I.S. EN 61508-6:2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 6: GUIDELINES ON THE APPLICATION OF IEC 61508-2 AND IEC 61508-3
I.S. EN ISO 20815:2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT
CEN ISO/TR 12489:2016 Petroleum, petrochemical and natural gas industries - Reliability modelling and calculation of safety systems (ISO/TR 12489:2013)
ISO 19372:2015 Microturbines applications — Safety
ISO 14971:2007 Medical devices Application of risk management to medical devices
BS EN ISO 14971:2012 Medical devices. Application of risk management to medical devices
ISO 21789:2009 Gas turbine applications — Safety
IEC 62619:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications
ISO/IEC 16085:2006 Systems and software engineering Life cycle processes Risk management
S.R. CLC/TR 50126-2:2007 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 2: GUIDE TO THE APPLICATION OF EN 50126-1 FOR SAFETY
IEC 61078:2016 Reliability block diagrams
EN 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
DIN EN ISO 14644-5:2005-03 Cleanrooms and associated controlled environments - Part 5: Operations (ISO 14644-5:2004)
IEC 60300-3-15:2009 Dependability management - Part 3-15: Application guide - Engineering of system dependability
UNE-EN 50159:2011 Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems
ISO 14644-5:2004 Cleanrooms and associated controlled environments — Part 5: Operations
IEC 60044-8:2002 Instrument transformers - Part 8: Electronic current transformers
ISO 14224:2016 Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment
IEC 62282-5-1:2012 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
CEI EN 50159 : 2012 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY-RELATED COMMUNICATION IN TRANSMISSION SYSTEMS
GEIA TA HB 0009 : 2013 RELIABILITY PROGRAM HANDBOOK
CSA N290.14 : 2015 QUALIFICATION OF DIGITAL HARDWARE AND SOFTWARE FOR USE IN INSTRUMENTATION AND CONTROL APPLICATIONS FOR NUCLEAR POWER PLANTS
EN 61496-1:2013/AC:2015 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
EN ISO 14698-1 : 2003 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS
UNI CEN ISO/TS 22367 : 2010 MEDICAL LABORATORIES - REDUCTION OF ERROR THROUGH RISK MANAGEMENT AND CONTINUAL IMPROVEMENT
UNI EN ISO 13849-2 : 2013 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
EN 31010:2010 Risk management - Risk assessment techniques
I.S. EN 61511-3:2017 FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 3: GUIDANCE FOR THE DETERMINATION OF THE REQUIRED SAFETY INTEGRITY LEVELS
04/30105027 DC : DRAFT JUNE 2004 ISO 21789 - GAS TURBINES - SAFETY
BS EN 16602-40-12:2014 Space product assurance. Fault tree analysis. Adoption notice ECSS/IEC 61025
CEI EN 60044-8 : 2004 INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS
I.S. EN 60987:2015 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - HARDWARE DESIGN REQUIREMENTS FOR COMPUTER-BASED SYSTEMS
15/30310506 DC : 0 BS EN 61078 - RELIABILITY BLOCK DIAGRAMS
PREN ISO 13849-2 : DRAFT 2010 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
UNE-EN 62282-3-1:2011 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
BS EN 61508-7:2010 Functional safety of electrical/electronic/ programmable electronic safety related systems Overview of techniques and measures
11/30251566 DC : 0 BS EN 62628 - GUIDANCE ON SOFTWARE ASPECTS OF DEPENDABILITY
03/116099 DC : DRAFT NOV 2003
BS PD ISO/TR 12489 : 2013 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RELIABILITY MODELLING AND CALCULATION OF SAFETY SYSTEMS
PREN 50126-1 : DRAFT 2015 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
DD IEC/PAS 62282-6-150:2011 Fuel cell technologies Micro fuel cell power systems. Safety. Water reactive (UN Division 4.3) compounds in indirect PEM fuel cells
BS EN 62551:2012 Analysis techniques for dependability. Petri net techniques
16/30339594 DC : DRAFT DEC 2016 BS EN 50129 - RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING
CEI UNI EN ISO 14971 : 2013 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
I.S. EN 62740:2015 ROOT CAUSE ANALYSIS (RCA)
BS EN 61014:2003 Programmes for reliability growth
07/30144128 DC : 0 BS EN 60300-3-15 - DEPENDABILITY MANAGEMENT - PART 3-15: GUIDANCE TO ENGINEERING OF SYSTEM DEPENDABILITY
UNE-EN 61882:2017 Hazard and operability studies (HAZOP studies) - Application guide
CEI EN 60300-3-15 : 2011 DEPENDABILITY MANAGEMENT - PART 3-15: APPLICATION GUIDE - ENGINEERING OF SYSTEM DEPENDABILITY
BS EN 61882:2016 Hazard and operability studies (HAZOP studies). Application guide
15/30309554 DC : 0 BS EN 61882 - HAZARD AND OPERABILITY STUDIES (HAZOP STUDIES) - APPLICATION GUIDE
NF EN 61014 : 2003 PROGRAMMES FOR RELIABILITY GROWTH
BS EN ISO 15378:2017 Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
CEI EN 60300-3-4 : 2010 DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS
BS ISO/IEC 16085:2006 Systems and software engineering. Life cycle processes. Risk management
I.S. EN 61427-2:2015 SECONDARY CELLS AND BATTERIES FOR RENEWABLE ENERGY STORAGE - GENERAL REQUIREMENTS AND METHODS OF TEST - PART 2: ON-GRID APPLICATIONS
EN 62619:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications
I.S. EN 31010:2010 RISK MANAGEMENT - RISK ASSESSMENT TECHNIQUES (IEC/ISO 31010:2009 (EQV))
01/122934 DC : DRAFT AUG 2001 BS EN ISO 14644-5 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 5: OPERATIONS
BS PD IEC/TS 62603-1 : 2014 INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
BS EN 62625-2:2016 Electronic railway equipment. On board driving data recording system Conformity testing
PD IEC/TR 80002-1:2009 Medical device software Guidance on the application of ISO 14971 to medical device software
DD ISO/TS 22367 : 2008 MEDICAL LABORATORIES - REDUCTION OF ERROR THROUGH RISK MANAGEMENT AND CONTINUAL IMPROVEMENT
BS EN 60300-3-14:2004 Dependability management Application guide - Maintenance and maintenance support
BS EN 60300-3-2:2005 Dependability management Application guide. Collection of dependability data from the field
UNI CEI EN ISO 14971 : 2012 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
BS EN 62628:2012 Guidance on software aspects of dependability
01/712575 DC : DRAFT SEP 2001 ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEM - PART 2: VALIDATION
ANSI/CSA FC 1:2014 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
09/30169892 DC : 0 BS EN 62502 - ANALYSIS TECHNIQUES FOR DEPENDABILITY - EVENT TREE ANALYSIS
PD ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
API 691 : 2017 RISK-BASED MACHINERY MANAGEMENT
CSA ISO 14971 : 2007 : R2012 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
NF EN 60300 3-4 : 2008 DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS
PREN 17141 : DRAFT 2017 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL
I.S. EN 62625-2:2016 ELECTRONIC RAILWAY EQUIPMENT - ON BOARD DRIVING DATA RECORDING SYSTEM - PART 2: CONFORMITY TESTING
CSA C22.2 No. 60601.1.4 : 2002 MEDICAL ELECTRICAL EQUIPMENT - PART 1-4: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS
AAMI ISO 14971 : 2007 : R2010 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
BS EN 60812:2006 Analysis techniques for system reliability. Procedure for failure mode and effects analysis (FMEA)
CSA/ANSI NGV 5.2-2017 Vehicle fueling appliances (VFA)
I.S. EN 61014:2003 PROGRAMMES FOR RELIABILITY GROWTH
IEEE C37.10-2011 REDLINE IEEE Guide for Investigation, Analysis, and Reporting of Power Circuit Breaker Failures
IEEE/ISO/IEC 16085-2006 ISO/IEC/IEEE International Standard - Systems and Software Engineering - Life Cycle Processes - Risk Management
I.S. EN 61069-5:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 5: ASSESSMENT OF SYSTEM DEPENDABILITY
UNI EN ISO 20815 : 2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT
I.S. EN 62282-3-100:2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV))
ISO 17359:2018 Condition monitoring and diagnostics of machines — General guidelines
ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
I.S. EN 62502:2010 ANALYSIS TECHNIQUES FOR DEPENDABILITY - EVENT TREE ANALYSIS (ETA)
I.S. EN 60300-2:2004 DEPENDABILITY MANAGEMENT - PART 2: GUIDELINES FOR DEPENDABILITY MANAGEMENT
IEC PAS 62282-6-1:2006 Fuel cell technologies - Part 6-1: Micro fuel cell power systems - Safety
CEI EN 61078 : 2006 ANALYSIS TECHNIQUES FOR DEPENDABILITY - RELIABILITY BLOCK DIAGRAM AND BOOLEAN METHODS
ISO/IEC TR 15026-1:2010 Systems and software engineering Systems and software assurance Part 1: Concepts and vocabulary
S.R. ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
BIS IS 11137-2 : 2012(R2016) ANALYSIS TECHNIQUES FOR SYSTEM RELIABILITY - PART 2: PROCEDURE FOR FAILURE MODE AND EFFECTS ANALYSIS (FMEA)
EN ISO 14971:2012 Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01)
EN ISO 20815:2010 Petroleum, petrochemical and natural gas industries - Production assurance and reliability management (ISO 20815:2008, Corrected version 2009-06-15)
IEC 61511-2:2016 Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016
I.S. EN 62308:2006 EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS
IEC 60987:2007+AMD1:2013 CSV Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
IEC 61511-2 REDLINE : 2ED 2016 FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 2: GUIDELINES FOR THE APPLICATION OF IEC 61511-1: 2016
IEC 60300-3-10:2001 Dependability management - Part 3-10: Application guide - Maintainability
IEC 62280:2014 Railway applications - Communication, signalling and processing systems - Safety related communication in transmission systems
EN 50159:2010 Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems
IEC 61800-5-2:2016 RLV Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
BS EN ISO 17776:2016 Petroleum and natural gas industries. Offshore production installations. Major Accident hazard management during the design of new installations
UNE-EN 62429:2012 Reliability growth - Stress testing for early failures in unique complex systems
IEC 61907:2009 Communication network dependability engineering
BS EN ISO 14644-5:2004 Cleanrooms and associated controlled environments Operations
IEC 60300-3-2:2004 Dependability management - Part 3-2: Application guide - Collection of dependability data from the field
IEC 61131-6:2012 Programmable controllers - Part 6: Functional safety
11/30242646 DC : DRAFT FEB 2011 BS EN 62282-2 - FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
IEC 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
UNE-EN 61508-6:2011 Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3
ISO 14698-1:2003 Cleanrooms and associated controlled environments Biocontamination control Part 1: General principles and methods
BS ISO 19372:2015 Microturbines applications. Safety
BS EN 1050:1997 Safety of machinery. Principles for risk assessment
IEC 60706-2:2006 Maintainability of equipment - Part 2: Maintainability requirements and studies during the design and development phase
IEC 62502:2010 Analysis techniques for dependability - Event tree analysis (ETA)
IEC 61014:2003 Programmes for reliability growth
IEC 60601-1-4:1996+AMD1:1999 CSV Medical electrical equipment - Part 1-4: General requirements for safety - Collateral Standard: Programmable electrical medical systems
IEC 62628:2012 Guidance on software aspects of dependability
IEC 62282-6-100:2010+AMD1:2012 CSV Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety
IEC TS 62933-5-1:2017 Electrical energy storage (EES) systems - Part 5-1: Safety considerations for grid-integrated EES systems - General specification
UNE-EN 62282-5-1:2013 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
ISO 17776:2016 Petroleum and natural gas industries Offshore production installations Major accident hazard management during the design of new installations
IEC 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
UNE-ISO 16110-1:2015 Hydrogen generators using fuel processing technologies -- Part 1: Safety
ISO 22734-2:2011 Hydrogen generators using water electrolysis process Part 2: Residential applications
IEC 61703:2016 Mathematical expressions for reliability, availability, maintainability and maintenance support terms
IEC 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
IEC 60300-3-14:2004 Dependability management - Part 3-14: Application guide - Maintenance and maintenance support
10/30173705 DC : DRAFT SEP 2010 BS EN 62282-5-1 - FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
CEI EN 50129 : 2004 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING
IEC 62740:2015 Root cause analysis (RCA)
16/30332627 DC : 0 BS EN 62932-2-2 ED 1.0 - FLOW BATTERY SYSTEMS FOR STATIONARY APPLICATIONS - PART 2-2: SAFETY REQUIREMENTS
IEC 60300-2:2004 Dependability management - Part 2: Guidelines for dependability management
09/30150663 DC : 0 BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
IEC 61427-2:2015 Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 2: On-grid applications
16/30351274 DC : 0 BS EN 62933-5-1 - ELECTRICAL ENERGY STORAGE (ESS) SYSTEMS - PART 5-1: SAFETY CONSIDERATIONS RELATED TO GRID INTEGRATED ELECTRICAL ENERGY STORAGE (EES) SYSTEMS
BS ISO 22734-2:2011 Hydrogen generators using water electrolysis process Residential applications
IEC 61165:2006 Application of Markov techniques
BS EN 62282-2:2012 Fuel cell technologies Fuel cell modules
UNE-EN 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
EN 62502 : 2010 ANALYSIS TECHNIQUES FOR DEPENDABILITY - EVENT TREE ANALYSIS (ETA)
EN 61511-1:2017/A1:2017 FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS
DIN EN ISO 80079-36:2016-12 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
EN ISO 14644-5:2004 Cleanrooms and associated controlled environments - Part 5: Operations (ISO 14644-5:2004)
EN 16602-40-12:2014 Space product assurance - Fault tree analysis - Adoption notice ECSS/IEC 61025
EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
EN ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
EN ISO 17776:2016 Petroleum and natural gas industries - Offshore production installations - Major Accident hazard management during the design of new installations (ISO 17776:2016)
EN 1441 : 1997 MEDICAL DEVICES - RISK ANALYSIS
CEI EN 60300-3-14 : 2005 DEPENDABILITY MANAGEMENT - PART 3-14: APPLICATION GUIDE - MAINTENANCE AND MAINTENANCE SUPPORT
ISO/TR 12489:2013 Petroleum, petrochemical and natural gas industries Reliability modelling and calculation of safety systems
BS EN 61869-6:2016 Instrument transformers Additional general requirements for low-power instrument transformers
BS IEC 60300-3.6 : 1997 DEPENDABILITY MANAGEMENT - APPLICATION GUIDE - SOFTWARE ASPECTS OF DEPENDABILITY
BS EN 62282-3-1:2007 Fuel cell technologies Stationary fuel cell power systems. Safety
UNE-EN 60300-3-4:2011 Dependability management -- Part 3-4: Application guide - Guide to the specification of dependability requirements
I.S. EN 61511-2:2017 FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 2: GUIDELINES FOR THE APPLICATION OF IEC 61511-1
BS ISO/IEC 15026-1:2013 Systems and software engineering. Systems and software assurance Concepts and vocabulary
10/30238615 DC : DRAFT NOV 2010 BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS EN 61703:2016 Mathematical expressions for reliability, availability, maintainability and maintenance support terms
IEC 61511-3:2016 Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels
17/30310522 DC : 0 BS EN 60812 ED 3.0 - FAILURE MODE AND EFFECTS ANALYSIS (FMEA)
S.R. CEN ISO TS 22367:2010 MEDICAL LABORATORIES - REDUCTION OF ERROR THROUGH RISK MANAGEMENT AND CONTINUAL IMPROVEMENT
S.R. CLC/TS 62603-1:2014 INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
05/30133969 DC : DRAFT MAY 2005
BS IEC 61882:2001 Hazard and operability studies (HAZOP studies). Application guide
BS EN 62619:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for secondary lithium cells and batteries, for use in industrial applications
14/30298031 DC : 0 BS EN 61069-5 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 5: ASSESSMENT OF SYSTEM DEPENDABILITY
BIS IS 15037 : 2011 ANALYSIS TECHNIQUES FOR DEPENDABILITY - RELIABILITY BLOCK DIAGRAM AND BOOLEAN METHODS
03/108624 DC : DRAFT JULY 2003 IEC 60300-3-2 - DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
15/30330403 DC : 0 BS EN 50126-1 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS
04/30079743 DC : DRAFT APR 2004 ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000 WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
17/30329441 DC : 0 BS EN 17141 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL
96/124833 DC : DRAFT SEP 1996 BS EN ISO 14698-1 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES
CSA ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
BS EN 60300-3-4:2008 Dependability management Application guide. Guide to the specification of dependability requirements
CSA ISO 14971 : 2007 : R2017 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
ISO/TS 18667:2018 Space systems — Capability-based Safety, Dependability, and Quality Assurance (SD&QA) programme management
CSA Q634 : M91 RISK ANALYSIS REQUIREMENTS & GUIDELINES
I.S. EN 61131-6:2012 PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY (IEC 61131-6:2012 (EQV))
IEEE/ISO/IEC 15026-1-2014 IEEE Standard Adoption of ISO/IEC 15026-1--Systems and Software Engineering--Systems and Software Assurance--Part 1: Concepts and Vocabulary
I.S. EN 61557-15:2014 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
CSA C22.2 No. 62282-2 :2007 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
I.S. EN 60812:2006 ANALYSIS TECHNIQUES FOR SYSTEM RELIABILITY - PROCEDURE FOR FAILURE MODE AND EFFECTS ANALYSIS (FMEA)
I.S. EN 60300-3-4:2008 DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS
I.S. EN 62628:2012 GUIDANCE ON SOFTWARE ASPECTS OF DEPENDABILITY (IEC 62628:2012 (EQV))
BS EN ISO 20815:2010 Petroleum, petrochemical and natural gas industries. Production assurance and reliability management
I.S. EN 62429:2008 RELIABILITY GROWTH - STRESS TESTING FOR EARLY FAILURES IN UNIQUE COMPLEX SYSTEMS
ASTM E 2352 : 2004 : R2010 Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations
IEC 61511-1:2016+AMD1:2017 CSV Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
IEC 60300-3-5:2001 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
IEC 60300-3-9:1995 Dependability management - Part 3: Application guide - Section 9: Risk analysis of technological systems
I.S. EN 61800-5-2:2017 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
I.S. EN 61496-1:2013 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
I.S. EN 61907:2010 COMMUNICATION NETWORK DEPENDABILITY ENGINEERING
I.S. EN 60300-3-14:2004 DEPENDABILITY MANAGEMENT - PART 3-14: APPLICATION GUIDE - MAINTENANCE AND MAINTENANCE SUPPORT
I.S. EN ISO 15378:2017 PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2015, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) (ISO 15378:2017)
IEC TS 62603-1:2014 Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications
EN 62282-6-100:2010/A1:2012 FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010/A1:2012)
BS ISO 22734-1:2008 Hydrogen generators using water electrolysis process Industrial and commercial applications
IEC 62551:2012 Analysis techniques for dependability - Petri net techniques
IEC 62429:2007 Reliability growth - Stress testing for early failures in unique complex systems
ISO/TS 22367:2008 Medical laboratories Reduction of error through risk management and continual improvement
ISO 22734-1:2008 Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
IEC 62308:2006 Equipment reliability - Reliability assessment methods
16/30354067 DC : 0 BS EN 62282-5-100 - FUEL CELL TECHNOLOGIES - PART 5-100: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
IEC 61869-6:2016 Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers
IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
BS EN ISO 14224:2016 Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
12/30236742 DC : 0 BS ISO/IEC 80079-36 - EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - BASIC METHODS AND REQUIREMENTS
ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
IEC 62282-3-1:2007 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
BS EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
IEC TS 62861:2017 Guidelines for principal component reliability testing for LED light sources and LED luminaires
IEC 60300-3-4:2007 Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements
CEN ISO/TS 22367:2010 Medical laboratories - Reduction of error through risk management and continual improvement (ISO/TS 22367:2008, including Cor 1:2009)
EN 62551 : 2012 ANALYSIS TECHNIQUES FOR DEPENDABILITY - PETRI NET TECHNIQUES (IEC 62551:2012)
EN 61511-2:2017 Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1
EN 61069-5:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability
CEN/TS 13763-27 : 2003 EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 27: DEFINITIONS, METHODS AND REQUIREMENTS FOR ELECTRONIC INITIATION SYSTEMS
EN 61511-3:2017 Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels
UNE-ISO 22734-1:2012 Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications
EN 60300-3-14:2004 Dependability management - Part 3-14: Application guide - Maintenance and maintenance support
EN 62282-5-1:2012 FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012)
EN 61508-7:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures
EN 62628:2012 Guidance on software aspects of dependability
EN 60300-2:2004 Dependability management - Part 2: Guidelines for dependability management
EN 60044-8:2002 Instrument transformers - Part 8: Electronic current transformers
EN 61427-2:2015 Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 2: On-grid applications
IEC 61511-3:2016 RLV Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels
EN 61703:2016 Mathematical expressions for reliability, availability, maintainability and maintenance support terms
EN 60706-2:2006 Maintainability of equipment - Part 2: Maintainability requirements and studies during the design and development phase
EN 61165:2006 Application of Markov techniques
EN 61014 : 2003 Programmes for reliability growth

IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
AS 4024.1100:2019 Safety of machinery Application guide
IEC 61078:2016 Reliability block diagrams
IEC 61165:2006 Application of Markov techniques
AS ISO 22367:2021 Medical laboratories - Application of risk management to medical laboratories
AS/NZS IEC 61703:2020 Mathematical expressions for reliability, availability, maintainability and maintenance support terms
IEC 60300-3-1:2003 Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology
AS/NZS IEC 60812:2020 Failure modes and effects analysis (FMEA and FMECA)

View more information
US$348.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.