IEEE DRAFT 386 : D2.3 2006

1 Scope
2 Normative reference
3 Definitions
4 Service conditions
  4.1 Usual
  4.2 Unusual
5 Ratings and characteristics
  5.1 Voltage
  5.2 Current
6 Construction
  6.1 Identification
  6.2 Operating means
  6.3 Shielding
  6.4 Interchangeability
  6.5 Test point
  6.6 Hold-down bails
  6.7 Bushing well stud torque withstand
  6.8 Thermal cycle withstand
7 Testing
  7.1 Production tests
  7.2 Design tests
  7.3 Test conditions
  7.4 Partial Discharge Test
  7.5 Dielectric tests
  7.6 Short-time current test
  7.7 Switching test
  7.8 Fault-closure test
  7.9 Current-cycling test for uninsulated components of 600 A
       connectors
  7.10 Current-cycling test for 200 A insulated connectors
  7.11 Current-cycling test for 600 A insulated connectors
  7.12 Accelerated sealing life test
  7.13 Cable pull-out test (tensile strength)
  7.14 Operating-force test
  7.15 Operating-eye test
  7.16 Test-point cap test
  7.17 Test-point tests
  7.18 Shielding test
  7.19 Bushing well stud torque test
  7.20 Thermal cycle withstand test
Annexes
Annex A Trial use guide for testing lubricants for separable
         connectors
Annex B Operating interface AC withstand test
Annex C Bibliography

Establishes definitions, service conditions, ratings, interchangeable construction features and tests for load break and dead break separable insulated connector systems rated 601 V and above, 600 A or less, for use on power distribution systems.