ISO 10042:2005
Withdrawn
Withdrawn
View Superseded by
Welding — Arc-welded joints in aluminium and its alloys — Quality levels for imperfections
Amended by
Available format(s)
Hardcopy , PDF
Published date
11-17-2005
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO 10042:2005 specifies quality levels for imperfections in arc-welded joints in aluminium and its alloys. It applies to material thicknesses above 0,5 mm. It covers full-penetration butt welds and all fillet welds. The principles of the standard may also be applied to partial-penetration butt welds.
Three quality levels are given in order to permit application to a wide range of welded constructions. The quality levels refer to production quality and not to the fitness for purpose of the product manufactured.
The standard applies to:
- all types of weld, e.g. butt welds, fillet welds and branch connections;
- the following welding processes and their sub-processes as defined in ISO 4063:
- 131....metal inert gas welding (MIG welding); gas metal arc welding /USA/,
- 141....tungsten inert gas welding (TIG welding); gas tungsten arc welding /USA/,
- 15......plasma arc welding;
- manual, mechanized and automatic welding;
- all welding positions.
Metallurgical aspects, e.g. grain size, hardness, are not covered by the standard.
| Committee |
ISO/TC 44/SC 10
|
| DevelopmentNote |
DRAFT ISO/DIS 10042 is also available for this standard. (02/2017)
|
| DocumentType |
Standard
|
| Pages |
19
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| GOST R ISO 10042 : 2009 | Identical |
| I.S. EN ISO 10042:2006 | Identical |
| DIN EN ISO 10042:2006-02 | Identical |
| NF EN ISO 10042 : 2006 | Identical |
| NBN EN ISO 10042 : 2006 | Identical |
| PN EN ISO 10042 : 2008 | Identical |
| BS EN ISO 10042:2005 | Identical |
| NS EN ISO 10042 : 1ED 2006 | Identical |
| ONORM EN ISO 10042 : 2006 AC 2006 | Identical |
| NEN EN ISO 10042 : 2005 C1 2006 | Identical |
| EN 30042 : 1994 | Identical |
| UNE-EN 30042:1995 | Identical |
| I.S. EN 30042:1994 | Identical |
| UNE-EN ISO 10042:2006 | Identical |
| EN ISO 10042:2005 | Identical |
| NS ISO 10042 : 1ED 1994 | Identical |
| DIN 8563-30:1985-10 | Similar to |
| DIN EN 30042:1994-08 | Corresponds |
| NEN ISO 10042 : 1994 | Identical |
| BS EN 4677-001:2012 | Aerospace series. Welded and brazed assemblies for aerospace construction. Joints of metallic materials by electron beam welding Quality of welded assemblies |
| I.S. EN ISO 15614-2:2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
| 07/30171119 DC : DRAFT AUG 2007 | BS EN ISO 25239-4 - FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES |
| I.S. EN 12079-1:2006 | OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING |
| 13/30259076 DC : 0 | BS EN 13445-8 - UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| 16/30294444 DC : 0 | BS ISO 21029-1 - CRYOGENIC VESSELS - TRANSPORTABLE VACUUM INSULATED VESSELS OF NOT MORE THAN 1000 LITRES VOLUME - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
| 15/30317351 DC : 0 | BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| EN ISO 12215-6:2008 | Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008) |
| 15/30311772 DC : 0 | BS EN ISO 17637 - NON-DESTRUCTIVE TESTING OF WELDS - VISUAL TESTING OF FUSION-WELDED JOINTS |
| 09/30186082 DC : 0 | BS EN 13110 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS - DESIGN AND CONSTRUCTION |
| DIN EN 13195:2013-12 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| 11/30253745 DC : 0 | BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
| 04/30125238 DC : DRAFT NOV 2004 | EN 15085-3 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
| API 2CCU : 2017 | OFFSHORE CARGO CARRYING UNITS |
| VDMA 24408 : DRAFT 2015 | LIMIT OF THE SCOPE OF THE EUROPEAN CONSTRUCTION PRODUCTS REGULATION 305/2011/EU WITH RESPECT TO PROCESS PLANT AND AMENDMENTS TO HARMONIZED STANDARDS UNDER THE EUROPEAN PRESSURE EQUIPMENT DIRECTIVE |
| PREN 14276-2 : DRAFT 2017 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| I.S. EN ISO 23277:2015 | NON-DESTRUCTIVE TESTING OF WELDS - PENETRANT TESTING - ACCEPTANCE LEVELS (ISO 23277:2015) |
| 17/30362892 DC : 0 | BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 2: Arc welding of aluminium and its alloys |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| BS EN 13480-8:2017 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| BS EN 13480-8:2017+A1:2019 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| DIN EN 15085-5:2008-01 | Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation |
| 13/30280057 DC : 0 | BS EN 13782 - TEMPORARY STRUCTURE - TENTS - SAFETY |
| BS EN 13981-4:2006 | Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Forgings |
| BS EN 12862:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
| 14/30278953 DC : 0 | BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| EN 1289:1998/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - PENETRANT TESTING OF WELDS - ACCEPTANCE LEVELS |
| EN 12517-2:2008 | Non-destructive testing of welds - Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels |
| EN 13195:2013 | Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| DIN EN ISO 17635:2017-04 | Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016) |
| EN 12062:1997/A2:2003 | NON-DESTRUCTIVE EXAMINATION OF WELDS - GENERAL RULES FOR METALLIC MATERIALS |
| EN 12517:1998/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS - ACCEPTANCE LEVELS |
| EN ISO 23277:2015 | Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015) |
| EN 13110:2012+A1:2017 | LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| EN ISO 17635:2016 | Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016) |
| I.S. EN 15085-5:2007 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 5: INSPECTION, TESTING AND DOCUMENTATION |
| I.S. EN 15085-3:2007 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
| 11/30050625 DC : 0 | BS EN ISO 2553 - WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED, BRAZED AND SOLDERED JOINTS |
| DIN EN ISO 2553:2014-04 | WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS (ISO 2553:2013) |
| BS EN ISO 25239-1:2011 | Friction stir welding. Aluminium Vocabulary |
| BS EN ISO 17637:2016 | Non-destructive testing of welds. Visual testing of fusion-welded joints |
| 13/30274822 DC : 0 | BS ISO 11119-4 - GAS CYLINDERS - REFILLABLE COMPOSITE GAS CYLINDERS AND TUBES - DESIGN, CONSTRUCTION AND TESTING - PART 4: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES UP TO 450 L WITH LOAD-SHARING WELDED METALLIC LINERS |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| 15/30303377 DC : 0 | BS EN ISO 17635 - NON-DESTRUCTIVE TESTING OF WELDS - GENERAL RULES FOR METALLIC MATERIALS - COMPLEMENTARY ELEMENT |
| BS EN ISO 17635:2016 | Non-destructive testing of welds. General rules for metallic materials |
| BS EN ISO 25239-4:2011 | Friction stir welding. Aluminium Specification and qualification of welding procedures |
| DIN EN ISO 17635:2015-08 (Draft) | NON-DESTRUCTIVE TESTING OF WELDS - GENERAL RULES FOR METALLIC MATERIALS (ISO 17635:2016) |
| 08/30148224 DC : DRAFT FEB 2008 | BS ISO 26444 - GAS CYLINDERS - REFILLABLE WELDED ALUMINIUM ALLOY GAS CYLINDERS FOR GREATER THAN 60 BAR TEST PRESSURE - DESIGN, CONSTRUCTION AND TESTING |
| DIN EN 1320:1996-12 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - FRACTURE TEST |
| 04/30050372 DC : DRAFT JUN 2004 | EN 13981-3 - ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 3: CASTINGS |
| EN ISO 10675-2:2017 | Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2017) |
| BS EN 13445-8 : 2014 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| 00/716910 DC : DRAFT NOV 2000 | BS EN ISO 15614-2 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
| ABS 0236 : 2016 | GUIDE FOR CERTIFICATION OF OFFSHORE ACCESS GANGWAYS |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| I.S. EN 13445-8:2014 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| EN ISO 9017:2018 | Destructive tests on welds in metallic materials - Fracture test (ISO 9017:2017) |
| BS EN ISO 10675-2:2017 | Non-destructive testing of welds. Acceptance levels for radiographic testing Aluminium and its alloys |
| DIN EN ISO 12215-6:2008-07 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| NF EN ISO 25239-4 : 2012 | FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES |
| I.S. EN 13110:2012 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| DIN EN 13981-2:2004-10 | Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 2: Plates and sheets |
| DIN EN 13981-3:2006-12 | Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 3: Castings |
| DIN EN ISO 15614-2:2005-07 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
| BS EN 12062:1998 | Non-destructive examination of welds. General rules for metallic materials |
| BS EN ISO 13919-2:2001 | Welding. Electron and laser beam welded joints. Guidance on quality levels for imperfections Aluminium and its weldable alloys |
| DIN EN ISO 23277:2015-06 | NON-DESTRUCTIVE TESTING OF WELDS - PENETRANT TESTING - ACCEPTANCE LEVELS (ISO 23277:2015) |
| DIN EN 22553:1997-03 | WELDED, BRAZED AND SOLDERED JOINTS - SYMBOLIC REPRESENTATION ON DRAWINGS |
| DIN EN 1289:2002-09 | NON-DESTRUCTIVE TESTING OF WELDS - PENETRANT TESTING OF WELDS - ACCEPTANCE LEVELS |
| DIN EN 13110:2017-05 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| I.S. EN 13480-8:2017&LC:2019 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| DIN EN 12517:2003-01 | NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS - ACCEPTANCE LEVELS |
| 12/30260023 DC : 0 | BS EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| 07/30158903 DC : 0 | BS EN 1011-1 - WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING |
| BS EN ISO 2553:2013 | Welding and allied processes. Symbolic representation on drawings. Welded joints |
| 13/30272523 DC : 0 | BS EN ISO 23277 - NON-DESTRUCTIVE TESTING OF WELDS - PENETRANT TESTING OF WELDS - ACCEPTANCE LEVELS |
| ISO/TS 20273:2017 | Guidelines on weld quality in relationship to fatigue strength |
| DIN EN 12517-2:2008-12 | NON DESTRUCTIVE TESTING OF WELDS - PART 2: EVALUATION OF WELDED JOINTS IN ALUMINIUM AND ITS ALLOYS BY RADIOGRAPHY - ACCEPTANCE LEVELS |
| 02/710860 DC : DRAFT SEP 2002 | BS EN 14532-3 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 3: CONFORMITY ASSESSMENT OF WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM ALLOYS |
| 13/30247837 DC : 0 | BS EN 13094 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
| 18/30350515 DC : 0 | BS ISO 20421-1 - CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING |
| I.S. EN ISO 17635:2016 | NON-DESTRUCTIVE TESTING OF WELDS - GENERAL RULES FOR METALLIC MATERIALS (ISO 17635:2016) |
| 16/30328759 DC : 0 | BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| ISO 10855-1:2018 | Offshore containers and associated lifting sets — Part 1: Design, manufacture and marking of offshore containers |
| I.S. EN 4677-001:2012 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTION - JOINTS OF METALLIC MATERIALS BY ELECTRON BEAM WELDING - PART 001: QUALITY OF WELDED ASSEMBLIES |
| ISO 10675-2:2017 | Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys |
| ISO/TR 17671-4:2002 | Welding — Recommendations for welding of metallic materials — Part 4: Arc welding of aluminium and aluminium alloys |
| S.R. CWA 15902-2:2009 | LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 2: SPECIFICATIONS FOR DESIGN, MANUFACTURE AND FOR USE OF ALUMINIUM AND STEEL TRUSSES AND TOWERS |
| ISO 21029-1:2018 | Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests |
| DIN EN ISO 17637:2015-05 (Draft) | NON-DESTRUCTIVE TESTING OF WELDS - VISUAL TESTING OF FUSION-WELDED JOINTS (ISO 17637:2016) |
| PREN 13480-8 : DRAFT 2012 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| ISO 11119-4:2016 | Gas cylinders — Refillable composite gas cylinders — Design, construction and testing — Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
| BS EN 14025 : 2013 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
| EN 14025:2013+A1:2016 | Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| ISO 17842-1:2015 | Safety of amusement rides and amusement devices — Part 1: Design and manufacture |
| ISO 20703:2006 | Gas cylinders — Refillable welded aluminium-alloy cylinders — Design, construction and testing |
| DIN EN 15085-3:2010-01 | Railway applications - Welding of railway vehicles and components - Part 3: Design requirements |
| DIN EN 13981-4:2007-02 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings |
| DIN EN 13110:2012-07 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| DIN EN 14276-2:2011-05 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| ISO 25239-1:2011 | Friction stir welding — Aluminium — Part 1: Vocabulary |
| BS EN 15085-3:2007 | Railway applications. Welding of railway vehicles and components Design requirements |
| BS EN 12517:1998 | Non-destructive testing of welds. Radiographic testing of welded joints. Acceptance levels |
| BS EN ISO 9606-3:1999 | Approval testing of welders. Fusion welding Copper and copper alloys |
| BS EN 1289:1998 | Non-destructive examination of welds. Penetrant testing of welds. Acceptance levels |
| BS EN 15085-5:2007 | Railway applications. Welding of railway vehicles and components Inspection, testing and documentation |
| EN ISO 25239-1:2011 | Friction stir welding - Aluminium - Part 1: Vocabulary (ISO 25239-1:2011) |
| EN 13094:2015 | Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction |
| ONORM EN 14276-2 : 2011 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| ÖNORM EN 14276-2:2020 07 01 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| I.S. EN 13094:2015 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
| EN ISO 25239-4:2011 | Friction stir welding - Aluminium - Part 4: Specification and qualification of welding procedures (ISO 25239-4:2011) |
| EN 14532-3:2004 | Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
| I.S. EN ISO 15614-4:2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 4: FINISHING WELDING OF ALUMINIUM CASTINGS |
| I.S. EN ISO 2553:2013 | WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS (ISO 2553:2013) |
| BS ISO 11119-4:2016 | Gas cylinders. Refillable composite gas cylinders. Design, construction and testing Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
| BS EN 13195:2013 | Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| 04/30125246 DC : DRAFT NOV 2004 | EN 15085-5 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 5: INSPECTION, TESTING AND DOCUMENTATION |
| I.S. EN ISO 9017:2018 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - FRACTURE TEST (ISO 9017:2017) |
| ISO 2553:2013 | Welding and allied processes — Symbolic representation on drawings — Welded joints |
| BS ISO 20703:2006 | Gas cylinders. Refillable welded aluminium-alloy cylinders. Design, construction and testing |
| PREN 12972 : DRAFT 2017 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| 15/30331867 DC : 0 | BS EN ISO 10855-3 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 3: PERIODIC INSPECTION, EXAMINATION AND TESTING |
| 04/30050376 DC : DRAFT AUG 2004 | EN 13981-4 - ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 4: FORGINGS |
| 15/30331856 DC : 0 | BS EN ISO 10855-1 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINER - DESIGN, MANUFACTURE AND MARKING |
| PD ISO/TS 20273:2017 | Guidelines on weld quality in relationship to fatigue strength |
| EN 12079-3:2006 | Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing |
| 03/115441 DC : DRAFT OCT 2003 | BS EN ISO 15614-6 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - ARC WELDING OF COPPER AND ITS ALLOYS |
| ISO 12215-6:2008 | Small craft — Hull construction and scantlings — Part 6: Structural arrangements and details |
| I.S. EN ISO 25239-4:2011 | FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES (ISO 25239-4:2011) |
| I.S. EN ISO 10675-2:2017 | NON-DESTRUCTIVE TESTING OF WELDS - ACCEPTANCE LEVELS FOR RADIOGRAPHIC TESTING - PART 2: ALUMINIUM AND ITS ALLOYS (ISO 10675-2:2017) |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| EN 13445-8 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| 17/30351221 DC : 0 | BS EN 14276-2 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| EN ISO 2553:2013 | Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2013) |
| ISO 9017:2017 | Destructive tests on welds in metallic materials — Fracture test |
| I.S. EN 13195:2013 | ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) |
| I.S. EN ISO 17637:2016 | NON-DESTRUCTIVE TESTING OF WELDS - VISUAL TESTING OF FUSION-WELDED JOINTS (ISO 17637:2016) |
| DIN EN 14532-3:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 3: CONFORMITY ASSESSMENT OF WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM ALLOYS |
| DIN EN 13094:2015-07 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
| DIN EN 13814:2005-06 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| BS EN 22553:1995 | Welded, brazed and soldered joints. Symbolic representation on drawings |
| BS ISO 17842-1:2015 | Safety of amusement rides and amusement devices Design and manufacture |
| ISO 15614-6:2006 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 6: Arc and gas welding of copper and its alloys |
| BS EN ISO 9606-2:2004 | Qualification test of welders. Fusion welding Aluminium and aluminium alloys |
| BS EN 1711:2000 | Non-destructive examination of welds. Eddy current examination of welds by complex plane analysis |
| BS EN 14276-2 : 2007 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| ISO 23277:2015 | Non-destructive testing of welds — Penetrant testing — Acceptance levels |
| ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
| ISO 17637:2016 | Non-destructive testing of welds — Visual testing of fusion-welded joints |
| BS EN 13981-2:2004 | Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Plates and sheets |
| I.S. EN 14276-2:2007 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| BS EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc welding of aluminium and its alloys |
| ISO 15614-4:2005 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 4: Finishing welding of aluminium castings |
| ISO 25239-4:2011 | Friction stir welding — Aluminium — Part 4: Specification and qualification of welding procedures |
| EN 14276-2:2007+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements |
| BS EN 14532-3:2004 | Welding consumables. Test methods and quality requirements Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
| BS EN ISO 15614-4:2005 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Finishing welding of aluminium castings |
| BS EN 13981-3:2006 | Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Castings |
| EN 13814:2004 | Fairground and amusement park machinery and structures - Safety |
| EN 13981-2:2004 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets |
| EN ISO 17637:2016 | Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
| EN 13981-4:2006 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings |
| EN 13981-3:2006 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings |
| EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
| EN 13981-1:2003 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products |
| EN ISO 9606-2:2004 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
| EN 4677-001:2012 | Aerospace series - Welded and brazed assemblies for aerospace construction - Joints of metallic materials by electron beam welding - Part 001: Quality of welded assemblies |
| EN 15085-5:2007 | Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation |
| EN 22553:1994 | Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992) |
| EN ISO 15614-6:2006 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006) |
| EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| I.S. EN 12079-3:2006 | OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 3: PERIODIC INSPECTION, EXAMINATION AND TESTING |
| I.S. EN 13814:2005 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| PREN ISO 15614-6 : DRAFT 2003 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 6: ARC WELDING OF COPPER AND ITS ALLOYS |
| IEEE DRAFT 1003.13 : D9 SEPT 97 | INFORMATION TECHNOLOGY - STANDARDIZED APPLICATION ENVIRONMENT PROFILE - POSIX REALTIME APPLICATION SUPPORT (AEP) |
| I.S. EN ISO 9606-2:2005 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 2: ALUMINIUM AND ALUMINIUM ALLOYS |
| 03/116565 DC : DRAFT OCT 2003 | ISO 20703 - GAS CYLINDERS - REFILLABLE WELDED ALUMINIUM ALLOY - DESIGN, CONSTRUCTION AND TESTING |
| DIN EN ISO 25239-4:2012-03 | FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES (ISO 25239-4:2011) |
| 17/30353044 DC : 0 | BS EN ISO 2553 - WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS |
| BS EN ISO 23277:2015 | Non-destructive testing of welds. Penetrant testing. Acceptance levels |
| PREN 13445-8 : DRAFT 2013 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| EN 12079-1:2006 | Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking |
| BS EN 12517-2:2008 | Non-destructive testing of welds Evaluation of welded joints in aluminium and its alloys by radiography. Acceptance levels |
| I.S. EN 12517-2:2008 | NON-DESTRUCTIVE TESTING OF WELDS - PART 2: EVALUATION OF WELDED JOINTS IN ALUMINIUM AND ITS ALLOYS BY RADIOGRAPHY - ACCEPTANCE LEVELS |
| I.S. EN ISO 25239-1:2011 | FRICTION STIR WELDING - ALUMINIUM - PART 1: VOCABULARY (ISO 25239-1:2011) |
| I.S. EN 14025:2013 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
| 17/30360691 DC : 0 | BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| I.S. EN ISO 12215-6:2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| DIN EN ISO 9606-3:1999-06 | APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 3: COPPER AND COPPER ALLOYS |
| DIN EN ISO 9606-2:2005-03 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004); German version EN ISO 9606-2:2004 |
| BS EN 13981-1:2003 | Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Extruded products |
| BS EN 12079-1:2006 | Offshore containers and associated lifting sets Offshore containers. Design, manufacture and marking |
| ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
| BS EN ISO 15614-6:2006 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc and gas welding of copper and its alloys |
| BS EN 13814:2004 | Fairground and amusement park machinery and structures. Safety |
| BS EN 12079-3:2006 | Offshore containers and associated lifting sets Periodic inspection, examination and testing |
| BS EN 1011-4:2000 | Welding. Recommendations for welding of metallic materials Arc welding of aluminium and aluminium alloys |
| BS EN 13094:2015 | Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction |
| BS EN 13110 : 2012 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| DIN EN ISO 15614-6:2007-01 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006) |
| UNE-EN 14276-2:2008 | Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements |
| UNE-EN ISO 2553:2014 | Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2013) |
| UNE-EN 13110:2012+A1:2017 | LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| UNE-EN ISO 9017:2018 | Destructive tests on welds in metallic materials - Fracture test (ISO 9017:2017) |
| UNE-EN ISO 17637:2017 | Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
| UNE-EN ISO 23277:2015 | Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015) |
| UNE-EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| UNE-EN 13445-8:2015 | Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys |
| UNE-EN 13195:2014 | Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| UNE-EN 13094:2015 | Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| UNE-EN 14025:2014 | Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction |
| UNE-EN 13110:2012 | LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| UNE-EN ISO 17635:2017 | Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016) |
| ISO 2553:2013 | Welding and allied processes — Symbolic representation on drawings — Welded joints |
| ISO 6520-1:2007 | Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding |
| ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| ISO 13919-2:2001 | Welding — Electron and laser beam welded joints — Guidance on quality levels for imperfections — Part 2: Aluminium and its weldable alloys |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.