ISO 10683:2014
Withdrawn
Withdrawn
View Superseded by
Fasteners — Non-electrolytically applied zinc flake coatings
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
06-10-2014
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO 10683:2014 specifies requirements for non-electrolytically applied zinc flake coatings for steel fasteners. It applies to coatings:
- with or without hexavalent chromium;
- with or without top coat;
- with or without lubricant (integral lubricant and/or subsequently added lubricant).
It applies to bolts, screws, studs and nuts with ISO metric thread, to fasteners with non-ISO metric thread, and to non-threaded fasteners such as washers, pins, clips, etc.
ISO 10683:2014 does not specify requirements for such fastener properties as weldability or paintability. It does not apply to mechanically applied zinc coatings.
| Committee |
ISO/TC 2/SC 14
|
| DevelopmentNote |
DRAFT ISO/DIS 10683 is also available for this standard. (04/2016)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DS EN ISO 10683 : 2014 | Identical |
| BS EN ISO 10683:2014 | Identical |
| DIN EN ISO 10683:2016-07 (Draft) | Identical |
| PN EN ISO 10683 : 2014 | Identical |
| NBN EN ISO 10683 : 2014 | Identical |
| NF EN ISO 10683 : 2014 | Identical |
| EN ISO 10683:2014 | Identical |
| GOST R ISO 10683 : 2013 | Identical |
| I.S. EN ISO 10683:2014 | Identical |
| NEN EN ISO 10683 : 2014 | Identical |
| NS EN ISO 10683 : 2014 | Identical |
| DIN EN ISO 10683:2014-10 | Equivalent |
| UNE-EN ISO 10683:2015 | Identical |
| DIN EN ISO 10683:2001-02 | Identical |
| DIN EN ISO 4766:2011-11 | Slotted set screws with flat point (ISO 4766:2011) |
| BS EN ISO 14582:2013 | Fasteners. Hexalobular socket countersunk head screws, high head |
| ISO 6149-4:2017 | Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| 11/30239640 DC : 0 | BS ISO 10509 - HEXAGON FLANGE HEAD TAPPING SCREWS |
| 09/30202626 DC : 0 | BS EN ISO 12474 - HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| I.S. EN 4702-02:2017 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 02: SPRING CLAMP STUD COMBINATION |
| DIN EN ISO 1479:2011-10 | Hexagon head tapping screws (ISO 1479:2011) |
| 16/30337587 DC | BS EN ISO 7042. Prevailing torque (all-metal) hexagon high nuts. Product grades A and B |
| 16/30337622 DC : DRAFT MAR 2016 | BS EN ISO 8674 - HEXAGON HIGH NUTS (STYLE 2), WITH FINE PITCH THREAD - PRODUCT GRADES A AND B |
| 16/30337569 DC : 0 | BS EN ISO 4034 - HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C |
| 16/30337594 DC : DRAFT APR 2016 | BS ISO 7044 - PREVAILING TORQUE (ALL-METAL) HEXAGON HIGH NUTS WITH FLANGE - PRODUCT GRADES A AND B |
| BS ISO 7041:2012 | Prevailing torque type hexagon nuts (with non-metallic insert), style 2. Property classes 9 and 12 |
| ISO 7720:2012 | Prevailing torque type all-metal hexagon nuts, style 2 — Property class 9 |
| BS ISO 15072:2012 | Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A |
| I.S. EN ISO 7380-2:2011 | BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR |
| BIS IS 2269 : 2006 | HEXAGON SOCKET HEAD CAP SCREWS |
| NF EN ISO 12474 : 2010 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| NF EN ISO 4766 : 2011 | SLOTTED SET SCREWS WITH FLAT POINT |
| I.S. EN ISO 14581:2013 | FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013) |
| BIS IS 1363-3 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 3: HEXAGON NUTS (SIZE RANGE M 5 TO M 64) |
| NF EN ISO 7053 : 2011 | HEXAGON WASHER HEAD TAPPING SCREWS |
| BIS IS 1364-6 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 6: HEXAGON NUTS, STYLE 2 |
| DIN EN ISO 1483:2011-10 | Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011) |
| I.S. EN ISO 10642:2004 | HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004) |
| EN ISO 4016:2011 | Hexagon head bolts - Product grade C (ISO 4016:2011) |
| EN ISO 4014:2011 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| I.S. EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
| DIN EN 1670:2007-06 | Building hardware - Corrosion resistance - Requirements and test methods |
| DIN EN ISO 7719:2016-05 (Draft) | PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 (ISO 7719:2012) |
| DIN EN ISO 10512:2016-05 (Draft) | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10 (ISO 10512:2012) |
| DIN EN ISO 7040:2016-05 (Draft) | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012) |
| DIN EN ISO 7045:2011-12 | Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011) |
| DIN EN ISO 10642:2013-04 | HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004 + AMD 1:2012) |
| BS EN ISO 7085:1999 | Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
| BS EN ISO 1479:2011 | Hexagon head tapping screws |
| BS EN ISO 7089:2000 | Plain washers. Normal series. Product grade A |
| ISO 4029:2003 | Hexagon socket set screws with cup point |
| BS EN ISO 4762:2004 | Hexagon socket head cap screws |
| BS EN ISO 7045:2011 | Pan head screws with type H or type Z cross recess. Product grade A |
| BS EN ISO 4029:2003 | Hexagon socket set screws with cup point |
| BS EN ISO 4032:2012 | Hexagon regular nuts (style 1). Product grades A and B |
| BS EN ISO 14585:2011 | Hexalobular socket pan head tapping screws |
| BS EN ISO 7091:2000 | Plain washers. Normal series. Product grade C |
| BS EN ISO 1482:2011 | Slotted countersunk (flat) head tapping screws |
| BS EN ISO 1481:2011 | Slotted pan head tapping screws |
| BS EN ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts. Property classes 5, 8 and 10 |
| BS EN 14218:2003 | Hexagon nuts with flange. Fine pitch thread |
| ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B |
| BS EN ISO 14579:2011 | Hexalobular socket head cap screws |
| ISO 7085:1999 | Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
| ISO 4016:2011 | Hexagon head bolts — Product grade C |
| I.S. EN ISO 4034:2012 | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012) |
| I.S. EN ISO 21269:2004 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| I.S. EN ISO 1482:2011 | SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| I.S. EN ISO 2010:2011 | SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A (ISO 2010:2011) |
| I.S. EN ISO 4018:2011 | HEXAGON HEAD SCREWS - PRODUCT GRADE C |
| I.S. EN ISO 7045:2011 | PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7045:2011) |
| I.S. EN ISO 14585:2011 | HEXALOBULAR SOCKET PAN HEAD TAPPING SCREWS |
| I.S. EN ISO 4014:2011 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| DIN EN ISO 4017:2015-05 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
| DIN EN ISO 4029:2004-05 | Hexagon socket set screws with cup point (ISO 4029:2003); German version EN ISO 4029:2003 |
| EN ISO 4029:2003 | Hexagon socket set screws with cup point (ISO 4029:2003) |
| NF EN ISO 4018 : 2011 | HEXAGON HEAD SCREWS - PRODUCT GRADE C |
| DIN EN ISO 14581:2014-02 | Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013) |
| I.S. EN ISO 7053:2011 | HEXAGON WASHER HEAD TAPPING SCREWS |
| 12/30259649 DC : 0 | BS ISO 1891-2 - FASTENERS - TERMINOLOGY - PART 2: VOCABULARY AND DEFINITIONS FOR COATINGS |
| 09/30208230 DC : 0 | BS ISO 1483 - SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| 09/30203245 DC : 0 | BS ISO 7380-2 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 2: BUTTON HEAD WITH COLLAR (HEAD SHAPE B) |
| I.S. EN ISO 16228:2018 | FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017) |
| I.S. EN ISO 7380-1:2011 | BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS |
| 09/30208217 DC : 0 | BS ISO 1207 - SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A |
| BS ISO 7720:2012 | Prevailing torque type all-metal hexagon nuts, style 2. Property class 9 |
| 16/30337618 DC : 0 | BS EN ISO 8675 - HEXAGON THIN NUTS (STYLE 0) CHAMFERED, WITH FINE PITCH THREAD - PRODUCT GRADES A AND B |
| 16/30337626 DC : 0 | BS EN ISO 8673 - HEXAGON REGULAR NUTS (STYLE 1), WITH FINE PITCH THREAD - PRODUCT GRADES A AND B |
| BS ISO 6149-4 : 2006 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS |
| 09/30208248 DC : 0 | BS ISO 7053 - HEXAGON WASHER HEAD TAPPING SCREWS |
| PREN ISO 1482 : DRAFT 2009 | SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| 09/30208224 DC : 0 | BS ISO 1481 - SLOTTED PAN HEAD TAPPING SCREWS |
| DIN EN ISO 7051:2011-11 | Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011) |
| DIN EN ISO 1481:2011-10 | Slotted pan head tapping screws (ISO 1481:2011) |
| 09/30208239 DC : 0 | BS ISO 7049 - CROSS RECESSED PAN HEAD TAPPING SCREWS |
| MS 16842 : H | CLAMP, WIRE ROPE, SADDLED, SINGLE-GRIP, STEEL, TYPE 1 (MALLEABLE-IRON AND STEEL SADDLE) |
| DIN EN ISO 7380-2:2011-11 | Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011) |
| NF EN ISO 7380-2 : 2011 | BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR |
| ISO 7053:2011 | Hexagon washer head tapping screws |
| BS EN ISO 7380-2:2011 | Button head screws Hexagon socket button head screws with collar |
| I.S. EN ISO 12474:2010 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| ISO 7091:2000 | Plain washers — Normal series — Product grade C |
| PREN ISO 1207 : DRAFT 2009 | SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A |
| ISO 15071:2011 | Hexagon bolts with flange — Small series — Product grade A |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| ISO 7043:2012 | Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 — Product grades A and B |
| EN ISO 6149-4:2017 | Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017) |
| DIN EN ISO 8675:2016-05 (Draft) | HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012) |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN EN ISO 8765:2011-06 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
| DIN EN ISO 8676:2011-07 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
| DIN EN ISO 14586:2011-05 | Hexalobular socket countersunk head tapping screws (ISO 14586:2011) |
| DIN EN ISO 14587:2011-05 | Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011) |
| DIN EN ISO 8673:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012) |
| BS EN ISO 4027:2003 | Hexagon socket set screws with cone point |
| ISO 7092:2000 | Plain washers — Small series — Product grade A |
| BS EN ISO 7051:2011 | Cross-recessed raised countersunk (oval) head tapping screws |
| BS EN ISO 4033:2012 | Hexagon high nuts (style 2). Product grades A and B |
| ISO 10642:2004 | Hexagon socket countersunk head screws |
| ISO 7049:2011 | Cross-recessed pan head tapping screws |
| BS EN ISO 7047:2011 | Raised countersunk head screws (common head style) with type H or type Z cross recess. Product grade A |
| BS EN ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0). Product grade B |
| I.S. EN ISO 4762:2004 | HEXAGON SOCKET HEAD CAP SCREWS |
| I.S. EN ISO 4032:2012 | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012) |
| I.S. EN ISO 7719:2012 | PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 (ISO 7719:2012) |
| I.S. EN ISO 14583:2011 | HEXALOBULAR SOCKET PAN HEAD SCREWS |
| I.S. EN ISO 7049:2011 | CROSS-RECESSED PAN HEAD TAPPING SCREWS |
| I.S. EN ISO 1483:2011 | SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| I.S. EN ISO 7085:2000 | MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS |
| DIN EN ISO 7046-2:2011-12 | Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011) |
| DIN EN ISO 7380:2004-05 | HEXAGON SOCKET BUTTON HEAD SCREWS |
| I.S. EN ISO 8673:2012 | HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012) |
| I.S. EN ISO 7042:2012 | PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12 (ISO 7042:2012) |
| I.S. EN ISO 4036:2012 | HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B (ISO 4036:2012) |
| I.S. EN ISO 8676:2011 | HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| I.S. EN ISO 10512:2012 | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10 (ISO 10512:2012) |
| I.S. EN ISO 8675:2012 | HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012) |
| I.S. EN ISO 4033:2012 | HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012) |
| I.S. EN ISO 14587:2011 | HEXALOBULAR SOCKET RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| I.S. EN ISO 7047:2011 | RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7047:2011) |
| I.S. EN ISO 7046-2:2011 | COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS (ISO 7046-2:2011) |
| I.S. EN ISO 4016:2011 | HEXAGON HEAD BOLTS - PRODUCT GRADE C |
| I.S. EN ISO 14580:2011 | HEXALOBULAR SOCKET CHEESE HEAD SCREWS |
| I.S. EN ISO 10513:2012 | PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12 (ISO 10513:2012) |
| I.S. EN ISO 7051:2011 | CROSS-RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| I.S. EN ISO 14579:2011 | HEXALOBULAR SOCKET HEAD CAP SCREWS |
| I.S. EN ISO 898-1:2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| I.S. EN ISO 4017:2014 | FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014) |
| I.S. EN ISO 1580:2011 | SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A (ISO 1580:2011) |
| I.S. EN ISO 10511:2012 | PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT) (ISO 10511:2012) |
| I.S. EN ISO 8765:2011 | HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| I.S. EN ISO 7040:2012 | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012) |
| I.S. EN ISO 8674:2012 | HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012) |
| I.S. EN ISO 14584:2011 | HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS |
| I.S. EN ISO 1479:2011 | HEXAGON HEAD TAPPING SCREWS |
| I.S. EN 1670:2007 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 7048:2011 | CROSS-RECESSED CHEESE HEAD SCREWS |
| I.S. EN ISO 1207:2011 | SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A |
| I.S. EN ISO 7050:2011 | CROSS-RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| I.S. EN ISO 1481:2011 | SLOTTED PAN HEAD TAPPING SCREWS |
| I.S. EN ISO 2009:2011 | SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A (ISO 2009:2011) |
| I.S. EN ISO 14586:2011 | HEXALOBULAR SOCKET COUNTERSUNK HEAD TAPPING SCREWS |
| I.S. EN 13858:2006 | CORROSION PROTECTION OF METALS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS ON IRON OR STEEL COMPONENTS |
| I.S. EN ISO 4035:2012 | HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B (ISO 4035:2012) |
| NF EN ISO 4014 : 2011 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| NF EN ISO 4016 : 2011 | HEXAGON HEAD BOLTS - PRODUCT GRADE C |
| ISO 7041:2012 | Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12 |
| PD ISO/TS 11672:2016 | Connectors for fluid power and general use. Designation and nomenclature |
| FF-C-450 Revision G:2017 | Clamps, Wire Rope |
| BS ISO 4162:2012 | Hexagon bolts with flange. Small series. Product grade A with driving feature of product grade B |
| 09/30208236 DC : 0 | BS ISO 4766 - SLOTTED SET SCREWS WITH FLAT POINT |
| BS EN ISO 12474:2010 | Hexagon socket head cap screws with metric fine pitch thread |
| 16/30337591 DC : DRAFT APR 2016 | BS ISO 7043 - PREVAILING TORQUE HEXAGON HIGH NUTS WITH FLANGE (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B |
| 16/30337584 DC : 0 | BS ISO 7041 - PREVAILING TORQUE HEXAGON HIGH NUTS (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B |
| BS ISO 9974-4:2006 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| 15/30280562 DC : 0 | BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS |
| DIN ISO 8992:2005-09 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
| MS51868 Revision E:2017 | Clamp, Wire Rope, Double Saddled, Double-Grip, Steel, Type III |
| PREN ISO 4766 : DRAFT 2009 | SLOTTED SET SCREWS WITH FLAT POINT |
| BS EN 4702-04:2017 | Aerospace series. Quick release fastening systems for non-structural and lining applications Spring clamp |
| 16/30337580 DC : 0 | BS EN ISO 7040 - PREVAILING TORQUE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B |
| 09/30208242 DC : 0 | BS ISO 7050 - CROSS RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| BS EN ISO 7053:2011 | Hexagon washer head tapping screws |
| FF-C-450-1 Revision B:2017 | Clamp, Wire Rope, Double-Grip, Steel, Double Saddled, Type II |
| ISO 12126:2012 | Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 — Product grades A and B |
| SAE J2656_201611 | Fastener Part Standard - Hexagon Socket, Square Head, and Slotted Headless Set Screws - Inch Dimensioned |
| ISO 10509:2012 | Hexagon flange head tapping screws |
| ISO 4162:2012 | Hexagon bolts with flange — Small series — Product grade A with driving feature of product grade B |
| ISO 9974-4:2016 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| ISO 7044:2012 | Prevailing torque type all-metal hexagon nuts with flange, style 2 — Product grades A and B |
| BIS IS 1363-1 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 1: HEXAGON HEAD BOLTS (SIZE RANGE M 5 TO M 64) |
| ISO 12125:2012 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2 — Product grades A and B |
| EN 4702-04:2017 | Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 04: Spring clamp |
| ISO 4762:2004 | Hexagon socket head cap screws |
| ISO 15072:2012 | Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A |
| EN ISO 16228:2018 | Fasteners - Types of inspection documents (ISO 16228:2017) |
| ISO 7380:2004 | Hexagon socket button head screws |
| ISO 10663:2012 | Hexagon nuts with flange, style 2 — Fine pitch thread |
| I.S. EN ISO 7091:2000 | PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C |
| EN ISO 4017:2014 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
| DIN EN ISO 7042:2016-05 (Draft) | PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12 (ISO 7042:2012) |
| DIN EN ISO 7047:2011-12 | Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011) |
| DIN EN ISO 7048:2011-07 | Cross-recessed cheese head screws (ISO 7048:2011) |
| DIN EN ISO 7093-1:2000-11 | PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A |
| DIN EN ISO 4762:2004-06 | Hexagon socket head cap screws (ISO 4762:2004); German version EN ISO 4762:2004 |
| DIN EN ISO 14585:2011-05 | Hexalobular socket pan head tapping screws (ISO 14585:2011) |
| DIN EN ISO 1580:2011-12 | Slotted pan head screws - Product grade A (ISO 1580:2011) |
| DIN EN ISO 4034:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012) |
| DIN EN ISO 8674:2016-05 (Draft) | HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012) |
| BS EN ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread. Product grades A and B |
| ISO 4028:2003 | Hexagon socket set screws with dog point |
| ISO 4017:2014 | Fasteners — Hexagon head screws — Product grades A and B |
| BS EN ISO 4028:2003 | Hexagon socket set screws with dog point |
| BS EN ISO 7042:2012 | Prevailing torque type all-metal hexagon high nuts. Property classes 5, 8, 10 and 12 |
| BS EN ISO 21269:2004 | Hexagon socket head cap screws with metric fine pitch thread |
| BS EN ISO 1483:2011 | Slotted raised countersunk (oval) head tapping screws |
| BS EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
| BS EN ISO 10513:2012 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread. Property classes 8, 10 and 12 |
| ISO 7048:2011 | Cross-recessed cheese head screws |
| BS EN ISO 4018:2011 | Hexagon head screws. Product grade C |
| ISO 14585:2011 | Hexalobular socket pan head tapping screws |
| ISO 7090:2000 | Plain washers, chamfered — Normal series — Product grade A |
| EN ISO 7049:2011 | Cross-recessed pan head tapping screws (ISO 7049:2011) |
| EN ISO 7048:2011 | Cross-recessed cheese head screws (ISO 7048:2011) |
| EN ISO 7085 : 1999 | MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS |
| EN ISO 3269:2000 | Fasteners - Acceptance inspection (ISO 3269:2000) |
| EN ISO 14586:2011 | Hexalobular socket countersunk head tapping screws (ISO 14586:2011) |
| EN ISO 10513:2012 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012) |
| I.S. EN ISO 7094:2000 | PLAIN WASHERS - EXTRA LARGE SERIES - PRODUCT GRADE C |
| EN ISO 14583:2011 | Hexalobular socket pan head screws (ISO 14583:2011) |
| DIN EN ISO 7380-1:2011-11 | Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) |
| DIN EN ISO 7050:2011-11 | Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011) |
| BS EN 4702-02:2017 | Aerospace series. Quick release fastening systems for non-structural and lining applications Spring clamp stud combination |
| ISO 16228:2017 | Fasteners — Types of inspection documents |
| 09/30203242 DC : 0 | BS ISO 7380-1 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 1: BUTTON HEAD (HEAD SHAPE A) |
| IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
| PREN ISO 1481 : DRAFT 2009 | SLOTTED PAN HEAD TAPPING SCREWS |
| 16/30337630 DC | BS EN ISO 7719. Prevailing torque (all-metal) hexagon regular nuts. Product grades A and B |
| DIN EN ISO 1482:2011-10 | Slotted countersunk (flat) head tapping screws (ISO 1482:2011) |
| 15/30280509 DC : 0 | BS EN ISO 1891-4 - FASTENERS - TERMINOLOGY - PART 4: CONTROLS, INSPECTION, DELIVERY, ACCEPTANCE AND QUALITY |
| 07/30161494 DC : 0 | BS EN ISO 10644 - SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV |
| BS EN ISO 1891-2:2014 | Fasteners. Terminology Vocabulary and definitions for coatings |
| DIN 440:2001-03 | Washers with square hole for use in timber constructions |
| ONORM EN ISO 7053 : 2011 | HEXAGON WASHER HEAD TAPPING SCREWS (ISO 7053:2011) |
| BS ISO 10663:2012 | Hexagon nuts with flange, style 2. Fine pitch thread |
| PREN ISO 7050 : DRAFT 2009 | CROSS RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| BS EN ISO 7380-1:2011 | Button head screws Hexagon socket button head screws |
| EN ISO 1891-2:2014 | Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings (ISO 1891-2:2014) |
| DIN EN ISO 7049:2011-11 | Cross-recessed pan head tapping screws (ISO 7049:2011) |
| IS 1367 : Part 3 : 2017 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS |
| SAE J2295_201611 | Fastener Part Standard - Cap Screws, Hex, Heavy Hex and Heavy Hex Structural Bolts, and Hex Nuts (Inch Dimensioned) |
| SAE J2655_201509 | Fastener Part Standard - Washers and Lockwashers (Inch Dimensioned) |
| BS EN ISO 16228:2018 | Fasteners. Types of inspection documents |
| ISO 4161:2012 | Hexagon nuts with flange, style 2 — Coarse thread |
| EN 4702-02:2017 | Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 02: Spring clamp stud combination |
| I.S. EN 4702-04:2017 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 04: SPRING CLAMP |
| PREN ISO 7051 : DRAFT 2009 | CROSS RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| I.S. EN ISO 6149-4:2017 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017) |
| DIN EN ISO 12474:2011-01 | Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010) |
| PREN ISO 7049 : DRAFT 2009 | CROSS RECESSED PAN HEAD TAPPING SCREWS |
| DIN EN ISO 4032:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012) |
| DIN EN ISO 2010:2011-12 | Slotted raised countersunk head screws - Product grade A (ISO 2010:2011) |
| DIN EN ISO 7093-2:2000-11 | PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C |
| DIN EN ISO 14584:2011-06 | Hexalobular socket raised countersunk head screws (ISO 14584:2011) |
| DIN EN ISO 2009:2011-12 | Slotted countersunk flat head screws - Product grade A (ISO 2009:2011) |
| BS EN ISO 10642 : 2004 | HEXAGON SOCKET COUNTERSUNK HEAD SCREWS |
| BS EN ISO 2342:2003 | Slotted headless screws with shank |
| ISO 1483:2011 | Slotted raised countersunk (oval) head tapping screws |
| BS EN ISO 10512:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread. Property classes 6, 8 and 10 |
| BS EN ISO 10511:2012 | Prevailing torque type hexagon thin nuts (with non-metallic insert) |
| BS EN ISO 10644:2009 | Screw and washer assemblies made of steel with plain washers. Washer hardness classes 200 HV and 300 HV |
| BS EN ISO 4014:2011 | Hexagon head bolts. Product grades A and B |
| BS EN ISO 3269:2001 | Fasteners. Acceptance inspection |
| ISO 7045:2011 | Pan head screws with type H or type Z cross recess — Product grade A |
| ISO 7042:2012 | Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12 |
| BS EN 13858:2006 | Corrosion protection of metals. Non-electrolytically applied zinc flake coatings on iron or steel components |
| ISO 3269:2000 | Fasteners — Acceptance inspection |
| ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) — Product grades A and B |
| ISO 14579:2011 | Hexalobular socket head cap screws |
| ISO 4033:2012 | Hexagon high nuts (style 2) — Product grades A and B |
| BS EN ISO 7090:2000 | Plain washers, chamfered. Normal series. Product grade A |
| BS EN ISO 4035:2012 | Hexagon thin nuts chamfered (style 0). Product grades A and B |
| BS EN ISO 14584:2011 | Hexalobular socket raised countersunk head screws |
| ISO 14582:2013 | Fasteners — Hexalobular socket countersunk head screws, high head |
| BS EN ISO 7046-2:2011 | Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws |
| BS EN 14219:2003 | Hexagon bolts with flange with metric fine pitch thread. Small series |
| BS EN ISO 8676:2011 | Hexagon head screws with metric fine pitch thread. Product grades A and B |
| BS EN ISO 7050:2011 | Cross-recessed countersunk (flat) head tapping screws |
| BS EN ISO 14586:2011 | Hexalobular socket countersunk head tapping screws |
| BS EN ISO 1207:2011 | Slotted cheese head screws. Product grade A |
| BS EN ISO 4016:2011 | Hexagon head bolts. Product grade C |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| ISO 4034:2012 | Hexagon regular nuts (style 1) — Product grade C |
| ISO 7093-2:2000 | Plain washers — Large series — Part 2: Product grade C |
| ISO 14586:2011 | Hexalobular socket countersunk head tapping screws |
| BS EN ISO 7380:2004 | Hexagon socket button head screws |
| ISO 14587:2011 | Hexalobular socket raised countersunk (oval) head tapping screws |
| BS EN ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread. Product grades A and B |
| ISO 12474:2010 | Hexagon socket head cap screws with metric fine pitch thread |
| BS EN ISO 7048:2011 | Cross-recessed cheese head screws |
| ISO 7051:2011 | Cross-recessed raised countersunk (oval) head tapping screws |
| ISO 8676:2011 | Hexagon head screws with metric fine pitch thread — Product grades A and B |
| ISO 7380-1:2011 | Button head screws — Part 1: Hexagon socket button head screws |
| ISO 2342:2003 | Slotted headless screws with shank |
| ISO 2009:2011 | Slotted countersunk flat head screws — Product grade A |
| BS EN ISO 14587:2011 | Hexalobular socket raised countersunk (oval) head tapping screws |
| ISO 7093-1:2000 | Plain washers — Large series — Part 1: Product grade A |
| ISO 4014:2011 | Hexagon head bolts — Product grades A and B |
| ISO 7380-2:2011 | Button head screws — Part 2: Hexagon socket button head screws with collar |
| ISO 14581:2013 | Fasteners — Hexalobular socket countersunk flat head screws |
| ISO 4766:2011 | Slotted set screws with flat point |
| ISO 1482:2011 | Slotted countersunk (flat) head tapping screws |
| ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
| ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10 |
| ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0) — Product grade B |
| BS EN ISO 7049:2011 | Cross-recessed pan head tapping screws |
| ISO 21269:2004 | Hexagon socket head cap screws with metric fine pitch thread |
| ISO 10511:2012 | Prevailing torque type hexagon thin nuts (with non-metallic insert) |
| ISO 7046-2:2011 | Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws |
| ISO 7050:2011 | Cross-recessed countersunk (flat) head tapping screws |
| ISO 1207:2011 | Slotted cheese head screws — Product grade A |
| BS EN ISO 1580:2011 | Slotted pan head screws. Product grade A |
| ISO 14580:2011 | Hexalobular socket cheese head screws |
| BS EN ISO 4017:2014 | Fasteners. Hexagon head screws. Product grades A and B |
| ISO 10513:2012 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread — Property classes 8, 10 and 12 |
| ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B |
| ISO 1580:2011 | Slotted pan head screws — Product grade A |
| ISO 14583:2011 | Hexalobular socket pan head screws |
| BS EN 1670:2007 | Building hardware. Corrosion resistance. Requirements and test methods |
| ISO 10644:2009 | Screw and washer assemblies made of steel with plain washers — Washer hardness classes 200 HV and 300 HV |
| BS EN ISO 14583:2011 | Hexalobular socket pan head screws |
| ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10 |
| ISO 1891-2:2014 | Fasteners — Terminology — Part 2: Vocabulary and definitions for coatings |
| ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B |
| ISO 7089:2000 | Plain washers — Normal series — Product grade A |
| ISO 4026:2003 | Hexagon socket set screws with flat point |
| ISO 1479:2011 | Hexagon head tapping screws |
| ISO 4018:2011 | Hexagon head screws — Product grade C |
| ISO 10512:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread — Property classes 6, 8 and 10 |
| ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread — Product grades A and B |
| ISO 7047:2011 | Raised countersunk head screws (common head style) with type H or type Z cross recess — Product grade A |
| BS EN ISO 14580:2011 | Hexalobular socket cheese head screws |
| ISO 4027:2003 | Hexagon socket set screws with cone point |
| BS EN ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread. Product grades A and B |
| DIN EN ISO 4026:2004-05 | Hexagon socket set screws with flat point (ISO 4026:2003); German version EN ISO 4026:2003 |
| DIN EN ISO 14579:2011-06 | Hexalobular socket head cap screws (ISO 14579:2011) |
| DIN EN ISO 4028:2004-05 | Hexagon socket set screws with dog point (ISO 4028:2003); German version EN ISO 4028:2003 |
| EN ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012) |
| EN ISO 7089:2000 | Plain washers - Normal series - Product grade A (ISO 7089:2000) |
| EN ISO 14584:2011 | Hexalobular socket raised countersunk head screws (ISO 14584:2011) |
| EN ISO 7045:2011 | Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011) |
| EN ISO 7093-2:2000 | Plain washers - Large series - Part 2: Product grade C (ISO 7093-2:2000) |
| EN ISO 7042:2012 | Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012) |
| EN ISO 7091:2000 | Plain washers - Normal series - Product grade C (ISO 7091:2000) |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| EN ISO 1207:2011 | Slotted cheese head screws - Product grade A (ISO 1207:2011) |
| EN 13858:2006 | Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components |
| EN ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012) |
| EN ISO 14580:2011 | Hexalobular socket cheese head screws (ISO 14580:2011) |
| EN ISO 7380:2004 | Hexagon socket button head screws (ISO 7380:2004) |
| EN ISO 1482:2011 | Slotted countersunk (flat) head tapping screws (ISO 1482:2011) |
| EN ISO 1580:2011 | Slotted pan head screws - Product grade A (ISO 1580:2011) |
| EN ISO 14582:2013 | Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013) |
| EN ISO 4762:2004 | Hexagon socket head cap screws (ISO 4762:2004, Corrected version 2024-08) |
| EN ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012) |
| EN ISO 4018:2011 | Hexagon head screws - Product grade C (ISO 4018:2011) |
| EN ISO 8676:2011 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
| EN ISO 10512:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012) |
| EN ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
| EN ISO 10644:2009 | Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009) |
| EN ISO 14579:2011 | Hexalobular socket head cap screws (ISO 14579:2011) |
| EN ISO 4032:2012 | Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) |
| EN ISO 4766:2011 | Slotted set screws with flat point (ISO 4766:2011) |
| EN ISO 4033:2012 | Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012) |
| EN ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012) |
| EN ISO 7090:2000 | Plain washers, chamfered - Normal series - Product grade A (ISO 7090:2000) |
| EN ISO 7046-2:2011 | Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011) |
| EN ISO 7092:2000 | Plain washers - Small series - Product grade A (ISO 7092:2000) |
| EN ISO 7047:2011 | Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011) |
| EN ISO 7093-1:2000 | Plain washers - Large series - Part 1: Product grade A (ISO 7093-1:2000) |
| EN ISO 7380-1:2011 | Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) |
| EN 14218:2003 | Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified) |
| EN ISO 2010:2011 | Slotted raised countersunk head screws - Product grade A (ISO 2010:2011) |
| EN ISO 14581:2013 | Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013) |
| EN ISO 1483:2011 | Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011) |
| EN ISO 7380-2:2011 | Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011) |
| EN ISO 4027:2003 | Hexagon socket set screws with cone point (ISO 4027:2003) |
| EN ISO 1479:2011 | Hexagon head tapping screws (ISO 1479:2011) |
| EN ISO 7051:2011 | Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011) |
| EN ISO 4026:2003 | Hexagon socket set screws with flat point (ISO 4026:2003) |
| EN ISO 2342:2003 | Slotted headless screws with shank (ISO 2342:2003) |
| EN ISO 1481:2011 | Slotted pan head tapping screws (ISO 1481:2011) |
| EN ISO 14585:2011 | Hexalobular socket pan head tapping screws (ISO 14585:2011) |
| EN ISO 12474:2010 | Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010) |
| EN ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012) |
| EN ISO 4028:2003 | Hexagon socket set screws with dog point (ISO 4028:2003) |
| EN ISO 10511:2012 | Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012) |
| EN ISO 14587:2011 | Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011) |
| EN ISO 21269:2004 | Hexagon socket head cap screws with metric fine pitch thread (ISO 21269:2004) |
| EN ISO 7053:2011 | Hexagon washer head tapping screws (ISO 7053:2011) |
| EN ISO 2009:2011 | Slotted countersunk flat head screws - Product grade A (ISO 2009:2011) |
| EN ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012) |
| EN ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012) |
| EN ISO 7050:2011 | Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011) |
| I.S. EN ISO 4026:2004 | HEXAGON SOCKET SET SCREWS WITH FLAT POINT |
| I.S. EN ISO 4028:2004 | HEXAGON SOCKET SET SCREWS WITH DOG POINT |
| DIN EN ISO 14582:2014-02 | FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013) |
| BS EN ISO 4766:2011 | Slotted set screws with flat point |
| I.S. EN ISO 7380:2004 | HEXAGON SOCKET BUTTON HEAD SCREWS |
| BS ISO 10509:2012 | Hexagon flange head tapping screws |
| 14/30280974 DC : 0 | BS EN ISO 4759-3 - TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F |
| 16/30337573 DC : DRAFT APR 2016 | BS EN ISO 4035 - HEXAGON THIN NUTS (STYLE 0), CHAMFERED - PRODUCT GRADES A AND B |
| BS EN ISO 14581:2013 | Fasteners. Hexalobular socket countersunk flat head screws |
| 09/30208227 DC : 0 | BS ISO 1482 - SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| NF EN ISO 7380-1 : 2011 | BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS |
| MS 16843 : H | CLAMP, WIRE ROPE (DOUBLE GRIP), THREADED, STEEL, TYPE 4 |
| 09/30208245 DC : 0 | BS ISO 7051 - CROSS RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| BS ISO 8992:2005 | Fasteners. General requirements for bolts, screws, studs and nuts |
| 05/30127096 DC : DRAFT FEB 2005 | ISO 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS |
| BS ISO 4161:2012 | Hexagon nuts with flange, style 2. Coarse thread |
| DIN EN ISO 7053:2011-11 | HEXAGON WASHER HEAD TAPPING SCREWS (ISO 7053:2011) |
| I.S. EN ISO 1891-2:2014 | FASTENERS - TERMINOLOGY - PART 2: VOCABULARY AND DEFINITIONS FOR COATINGS (ISO 1891-2:2014) |
| I.S. EN ISO 4766:2011 | SLOTTED SET SCREWS WITH FLAT POINT |
| I.S. EN ISO 14582:2013 | FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013) |
| PREN ISO 1483 : DRAFT 2009 | SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| DIN EN ISO 10511:2016-05 (Draft) | PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT) (ISO 10511:2012) |
| DIN EN ISO 10644:2009-10 | SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV |
| DIN EN ISO 1207:2011-10 | Slotted cheese head screws - Product grade A (ISO 1207:2011) |
| DIN EN ISO 10513:2016-05 (Draft) | PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12 (ISO 10513:2012) |
| DIN EN ISO 4033:2016-05 (Draft) | HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012) |
| BS EN ISO 4034:2012 | Hexagon regular nuts (style 1). Product grade C |
| ISO 1481:2011 | Slotted pan head tapping screws |
| ISO 14584:2011 | Hexalobular socket raised countersunk head screws |
| ISO 2010:2011 | Slotted raised countersunk head screws — Product grade A |
| BS EN ISO 2009:2011 | Slotted countersunk flat head screws. Product grade A |
| BS EN ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread. Product grades A and B |
| BS EN ISO 2010:2011 | Slotted raised countersunk head screws. Product grade A |
| BS EN ISO 4026:2003 | Hexagon socket set screws with flat point |
| BS EN ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert). Property classes 5, 8 and 10 |
| DIN EN ISO 4016:2011-06 | Hexagon head bolts - Product grade C (ISO 4016:2011) |
| DIN EN 14218:2003-09 | HEXAGON NUTS WITH FLANGE - FINE PITCH THREAD |
| DIN EN ISO 14583:2011-06 | Hexalobular socket pan head screws (ISO 14583:2011) |
| DIN EN ISO 21269:2004-06 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| DIN EN ISO 2342:2004-05 | Slotted headless screws with shank (ISO 2342:2003); German version EN ISO 2342:2003 |
| DIN EN ISO 4014:2011-06 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| DIN EN ISO 14580:2011-06 | Hexalobular socket cheese head screws (ISO 14580:2011) |
| DIN EN ISO 4036:2013-04 | HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B (ISO 4036:2012) |
| DIN EN 13858:2007-02 | Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components |
| DIN EN ISO 4018:2011-07 | Hexagon head screws - Product grade C (ISO 4018:2011) |
| UNE-EN ISO 12474:2011 | Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010) |
| UNE-EN ISO 7380-1:2012 | Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) |
| UNE-EN ISO 7050:2011 | Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011) |
| UNE-EN ISO 1891-2:2015 | Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings (ISO 1891-2:2014) |
| UNE-EN ISO 4035:2013 | Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012) |
| UNE-EN ISO 10511:2013 | Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012) |
| UNE-EN ISO 7042:2013 | Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012) |
| UNE-EN ISO 898-1:2015 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| UNE-EN ISO 4033:2013 | Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012) |
| UNE-EN ISO 4016:2011 | Hexagon head bolts - Product grade C (ISO 4016:2011) |
| UNE-EN ISO 8675:2013 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012) |
| UNE-EN ISO 14581:2016 | Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013) |
| UNE-EN ISO 4017:2015 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
| UNE-EN ISO 8676:2011 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
| UNE-EN ISO 8673:2013 | Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012) |
| UNE-EN ISO 7047:2012 | Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011) |
| UNE-EN ISO 4036:2013 | Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012) |
| UNE-EN ISO 7040:2013 | Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012) |
| UNE-EN ISO 14587:2011 | Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011) |
| UNE-EN ISO 1482:2011 | Slotted countersunk (flat) head tapping screws (ISO 1482:2011) |
| UNE-EN ISO 7048:2011 | Cross-recessed cheese head screws (ISO 7048:2011) |
| UNE-EN ISO 4032:2013 | Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) |
| UNE-EN ISO 14584:2011 | Hexalobular socket raised countersunk head screws (ISO 14584:2011) |
| UNE-EN ISO 7046-2:2012 | Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011) |
| UNE-EN ISO 7053:2011 | Hexagon washer head tapping screws (ISO 7053:2011) |
| UNE-EN ISO 2010:2012 | Slotted raised countersunk head screws - Product grade A (ISO 2010:2011) |
| UNE-EN ISO 14586:2011 | Hexalobular socket countersunk head tapping screws (ISO 14586:2011) |
| UNE-EN ISO 14583:2011 | Hexalobular socket pan head screws (ISO 14583:2011) |
| UNE-EN ISO 10644:2010 | Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009) |
| UNE-EN ISO 8674:2013 | Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012) |
| UNE-EN ISO 7049:2011 | Cross-recessed pan head tapping screws (ISO 7049:2011) |
| UNE-EN ISO 1483:2011 | Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011) |
| UNE-EN ISO 1580:2012 | Slotted pan head screws - Product grade A (ISO 1580:2011) |
| UNE-EN ISO 7051:2011 | Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011) |
| UNE-EN ISO 14580:2011 | Hexalobular socket cheese head screws (ISO 14580:2011) |
| UNE-EN ISO 4018:2011 | Hexagon head screws - Product grade C (ISO 4018:2011) |
| UNE-EN ISO 2009:2012 | Slotted countersunk flat head screws - Product grade A (ISO 2009:2011) |
| UNE-EN ISO 6149-4:2017 | Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017) |
| UNE-EN ISO 4766:2012 | Slotted set screws with flat point (ISO 4766:2011) |
| UNE-EN ISO 7045:2012 | Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011) |
| UNE-EN ISO 4014:2011 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| UNE-EN ISO 7380-2:2012 | Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011) |
| UNE-EN ISO 1207:2011 | Slotted cheese head screws - Product grade A (ISO 1207:2011) |
| UNE-EN ISO 10512:2013 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012) |
| UNE-EN ISO 4034:2013 | Hexagon regular nuts (style 1) - Product grade C (ISO 4034:2012) |
| UNE-EN ISO 1481:2011 | Slotted pan head tapping screws (ISO 1481:2011) |
| UNE-EN ISO 10513:2013 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012) |
| UNE-EN ISO 14585:2011 | Hexalobular socket pan head tapping screws (ISO 14585:2011) |
| UNE-EN ISO 1479:2011 | Hexagon head tapping screws (ISO 1479:2011) |
| UNE-EN ISO 7719:2013 | Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012) |
| UNE-EN ISO 14579:2011 | Hexalobular socket head cap screws (ISO 14579:2011) |
| UNE-EN ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
| I.S. EN ISO 4029:2004 | HEXAGON SOCKET SET SCREWS WITH CUP POINT |
| I.S. EN ISO 4027:2004 | HEXAGON SOCKET SET SCREWS WITH CONE POINT |
| ISO 16047:2005 | Fasteners — Torque/clamp force testing |
| ISO 8991:1986 | Designation system for fasteners |
| ISO 16426:2002 | Fasteners — Quality assurance system |
| ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
| ISO 1463:2003 | Metallic and oxide coatings — Measurement of coating thickness — Microscopical method |
| ISO 4017:2014 | Fasteners — Hexagon head screws — Product grades A and B |
| ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
| ISO 1502:1996 | ISO general-purpose metric screw threads — Gauges and gauging |
| ISO 7089:2000 | Plain washers — Normal series — Product grade A |
| ISO 6932:2014 | Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| ISO 965-3:1998 | ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional screw threads |
| ISO 3613:2010 | Metallic and other inorganic coatings — Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods |
| ISO 6988:1985 | Metallic and other non organic coatings — Sulfur dioxide test with general condensation of moisture |
| ISO 3269:2000 | Fasteners — Acceptance inspection |
| ISO 4014:2011 | Hexagon head bolts — Product grades A and B |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.