• There are no items in your cart

ISO 1101:2017

Current
Current

The latest, up-to-date edition.

Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

02-01-2017

ISO 1101:2017 defines the symbol language for geometrical specification of workpieces and the rules for its interpretation.

It provides the foundation for geometrical specification.

The illustrations in this document are intended to illustrate how a specification can be fully indicated with visible annotation (including e.g. TEDs).

NOTE 1 Other International Standards referenced in Clause 2 and in Tables 3 and 4 provide more detailed information on geometrical tolerancing.

NOTE 2 This document gives rules for explicit and direct indications of geometrical specifications. Alternatively, the same specifications can be indicated indirectly in accordance with ISO 16792 by attaching them to a 3D CAD model. In this case, it is possible that some elements of the specification are available through a query function or other interrogation of information on the model instead of being indicated using visible annotation

DevelopmentNote
Supersedes ISO 1101-1. (04/2001) Supersedes ISO 10578. (04/2012) Supersedes ISO/FDIS 1101. (02/2017)
DocumentType
Standard
Pages
145
PublisherName
International Organization for Standardization
Status
Current
Supersedes

UNE-EN 60320-3:2015 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
DIN 874-1:2003-11 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHT EDGES - PART 1: STEEL STRAIGHT EDGES - DIMENSIONS, TECHNICAL DELIVERY CONDITIONS
I.S. EN ISO 286-2:2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010)
DIN EN ISO 10579:2013-11 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011)
DIN ISO 8062:1998-08 CASTINGS - SYSTEM OF DIMENSIONAL TOLERANCES AND MACHINING ALLOWANCES
DIN 19071-3:1990-06 MICROFILM 16 MM - DOCUMENT MARKS (BLIPS)
07/30164787 DC : 0 EN 62134-1 - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
DIN EN ISO 8098:2014-10 Cycles - Safety requirements for bicycles for young children (ISO 8098:2014)
CEI EN 61462 : 2008 COMPOSITE HOLLOW INSULATORS - PRESSURIZED AND UNPRESSURIZED INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGE GREATER THAN 1000 V - DEFINITIONS, TEST METHODS, ACCEPTANCE CRITERIA AND DESIGN RECOMMENDATIONS
BS ISO 5781:2000 Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces
CEI EN 62231 : 2007 COMPOSITE STATION POST INSULATORS FOR SUBSTATIONS WITH A.C. VOLTAGES GREATER THAN 1000 V UP TO 245 KV - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
BS EN 60876-1:2014 Fibre optic interconnecting devices and passive components. Fibre optic spatial switches Generic specification
15/30325929 DC : 0 BS EN 61202-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
BS ISO 16853:2010 Textile machinery. Sliver cans, rectangular. Main dimensions and tolerances
96/702225 DC : 0 PREN 4228 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOYS; SLEEVES BRAZING
DIN 2192:2002-08 FLAT FORM SPRINGS - QUALITY REQUIREMENTS
PREN 14033-1 : DRAFT 2014 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING
BS ISO 17447-1:2015 Road Vehicles. Glow-plugs with conical seating and their cylinder head housing Basic characteristics and dimensions for metal-sheath-type glow-plugs
12/30260519 DC : 0 BS EN ISO 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS (ISO/DIS 1179-1:2012)
ISO 11418-4:2005 Containers and accessories for pharmaceutical preparations Part 4: Tablet glass bottles
96/709826 DC : DRAFT JUL 1996 ISO/CD 6164-1 - HYDRAULIC FLUID POWER - ONE-PIECE SQUARE-FLANGE CONNECTORS - PART 1: FOUR-SCREW SQUARE-FLANGE CONNECTORS FOR USE AT PRESSURE OF 25MPA (250 BAR) TO 35 MPA (350 BAR), DN 10 TO DN 63
16/30344268 DC : 0 BS ISO 17396 - SYNCHRONOUS BELT DRIVES - METRIC PITCH - TOOTH PROFILES T AND AT ENDLESS AND OPEN ENDED BELTS AND PULLEYS
STANAG 3806 : 0 AIRCRAFT HIGH PRESSURE GASEOUS NITROGEN SYSTEMS REPLENISHMENT CONNECTORS
BS EN 62341-1-1:2009 Organic light emitting diode (OLED) displays Generic specifications
I.S. EN 61202-1:2017 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
DIN V 76624:1990-06 INTERNAL COMBUSTION ENGINES - PISTON RINGS - HALF KEYSTONE RINGS
14/30272936 DC : 0 BS EN ISO 17450-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 3: TOLERANCED FEATURES
I.S. EN 1280-1:1998 AGENT SPECIFIC FILLING SYSTEMS FOR ANAESTHETIC VAPORIZERS - PART 1: RECTANGULAR KEYED FILLING SYSTEMS
BS EN 60368-3:2010 Piezoelectric filters of assessed quality Standard outlines and lead connections
BS EN ISO 2538-2:2014 Geometrical product specifications (GPS). Wedges Dimensioning and tolerancing
DIN ISO 26622-1:2013-08 MODULAR TAPER INTERFACE WITH BALL TRACK SYSTEM - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS (ISO 26622-1:2008)
IEC 63032:2018 Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification
DIN ISO 2692:1990-05 TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL PRINCIPLE
14/30272942 DC : 0 BS EN ISO 18391 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - POPULATION SPECIFICATION
12/30232970 DC : 0 BS ISO 6623 - INTERNAL COMBUSTION ENGINES - PISTON RINGS - SCRAPER RINGS MADE OF CAST IRON
02/614072 DC : DRAFT NOV 2002 EN ISO 9409-1 - MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES
BS EN 62150-1:2005 Fibre optic active components and devices. Test and measurement procedures General and guidance
UNE-EN ISO 1179-1:2014 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
BS EN ISO 12780-1:2011 Geometrical product specifications (GPS). Straightness Vocabulary and parameters of straightness
11/30237803 DC : 0 BS ISO 7790 - HYDRAULIC FLUID POWER - FOUR-PORT MODULAR STACK VALVES AND FOUR-PORT DIRECTIONAL CONTROL VALVES, SIZES 02, 03, 05, 07, 08 AND 10 - CLAMPING DIMENSIONS
BS ISO 8015:1985 Technical drawings. Fundamental tolerancing principle
BS ISO 6624-2:2016 Internal combustion engines. Piston rings Half keystone rings made of cast iron
10/30199074 DC : 0 BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
05/30138267 DC : DRAFT AUG 2005 EN 1426 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
15/30321493 DC : 0 BS ISO 129-1 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
BS EN ISO 8098:2014 Cycles. Safety requirements for bicycles for young children
13/30286407 DC : 0 BS ISO 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS
04/30112390 DC : 0 ISO 3070-2 - TEST CONDITIONS FOR BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE - TESTING OF ACCURACY - PART 2: FLOOR-TYPE MACHINES WITH DETACHED, STATIONARY WORK-HOLDING TABLE
DIN EN ISO 1797:2016-05 (Draft) DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017)
03/109881 DC : DRAFT JULY 2003 ISO 15242-2 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 2: RADIAL BALL BEARINGS WITH CYLINDRICAL BORE AND CYLINDRICAL OUTSIDE SURFACE
11/30234042 DC : 0 BS EN 62595-1-1 ED.1 - LCD BACKLIGHT UNIT - PART 1-1: GENERIC SPECIFICATION
13/30281589 DC : 0 BS ISO 14137 - TEST CONDITIONS FOR WIRE ELECTRICAL-DISCHARGE MACHINES (WIRE EDM) - TESTING OF THE ACCURACY
I.S. EN ISO 10579:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011)
06/30155368 DC : 0 PREN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
13/30263803 DC : 0 BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING
DD CEN ISO/TS 12181-1:2007 Geometrical product specifications (GPS). Roundness Vocabulary and parameters of roundness
BS EN ISO 14405-1:2010 Geometrical product specifications (GPS). Dimensional tolerancing Linear sizes
I.S. EN 62341-1-1:2009 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 1-1: GENERIC SPECIFICATIONS
BS EN 16054:2012 BMX bicycles. Safety requirements and test methods
15/30314949 DC : 0 BS ISO 11418-2 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 2: SCREW-NECK GLASS BOTTLES FOR SYRUPS
15/30314886 DC : 0 BS ISO 11418-1 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 1: DROP-DISPENSING GLASS BOTTLES
CEI EN 62074-1 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
15/30323940 DC : 0 BS ISO 26622-1 - MODULAR TAPER INTERFACE WITH BALL TRACK SYSTEM - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS
BS EN ISO 6149-1:2007 Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Ports with truncated housing for O-ring seal
BS ISO 5599-2:2001 Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces with optional electrical connector
ISO 3302-2:2008 Rubber Tolerances for products Part 2: Geometrical tolerances
BS ISO 12818 : 2013 GLASS PACKAGING - STANDARD TOLERANCES FOR FLACONNAGE
02/203601 DC : DRAFT MAR 2002 IEC 60862-3. ED.2 - PIEZOELECTRIC AND DIELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTION. SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 3: STANDARD OUTLINES
CEI EN 62341-1-1 : 2011 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 1-1: GENERIC SPECIFICATIONS
NF EN 61462 : 2008 COMPOSITE HOLLOW INSULATORS - PRESSURIZED AND UNPRESSURIZED INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGE GREATER THAN 1000 V - DEFINITIONS, TEST METHODS, ACCEPTANCE CRITERIA AND DESIGN RECOMMENDATIONS
16/30310674 DC : 0 BS EN ISO 14457 - DENTISTRY - HANDPIECES AND MOTORS
10/30197234 DC : 0 BS ISO 28703 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR THERMAL SHOCK RESISTANCE OF POROUS CERAMICS
17/30341082 DC : 0 BS EN ISO 14978 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
11/30218527 DC : 0 BS ISO 17123-5 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 5: TOTAL STATIONS
BS 6615:1985 Specification for dimensional tolerances for metal and metal alloy castings
14/30299349 DC : 0 BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES
DIN ISO 10230:2016-07 Cycles - Splined hub and sprocket - Mating dimensions (ISO 10230:1990)
00/201724 DC : DRAFT APR 2000 IEC 61076-1 - CONNECTORS - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
BS EN 60715:2017 Dimensions of low-voltage switchgear and controlgear. Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories
BS IEC 62679-1-1:2014 Electronic paper displays Terminology
DIN ISO 3601-2:2010-08 Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008)
DIN ISO 10110-12 E : 2016 OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 12: ASPHERIC SURFACES (ISO 10110-12:2007 + AMD 1:2013)
ISO 11418-1:2016 Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass bottles
BS EN 62148-16:2009 Fibre optic active components and devices. Package and interface standards Transmitter and receiver components for use with LC connector interface
ISO 5347-0:1987 Methods for the calibration of vibration and shock pick-ups Part 0: Basic concepts
CEI EN 60876-1 : 2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
14/30304019 DC : 0 BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES
BS 7389-1:1990 Pneumatic fluid power valve mounting surfaces Specification for five-port directional control valves (without electrical connector)
DIN ISO 5459:1982-01 TECHNICAL DRAWINGS; GEOMETRICAL TOLERANCING; DATUMS AND DATUM SYSTEMS FOR GEOMETRICAL TOLERANCES
13/30281595 DC : 0 BS ISO 464 - ROLLING BEARINGS - RADIAL BEARINGS WITH LOCATING SNAP RING - DIMENSIONS AND GEOMETRICAL TOLERANCES (GPS)
DIN EN ISO 14405-1:2017-07 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO 14405-1:2016)
I.S. EN 61837-3:2015 SURFACE MOUNTED PIEZOELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTION - STANDARD OUTLINES AND TERMINAL LEAD CONNECTIONS - PART 3: METAL ENCLOSURES
05/30135256 DC : DRAFT JUN 2005 ISO/DIS 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS
BS EN 60320-2-2:1999 Appliance couplers for household and similar general purposes. Specification of requirements for individual types of coupler Interconnection couplers for household and similar equipment
DIN ISO 26622-2:2013-10 MODULAR TAPER INTERFACE WITH BALL TRACK SYSTEM - PART 2: DIMENSIONS AND DESIGNATION OF RECEIVERS (ISO 26622-2:2008)
03/106303 DC : DRAFT APR 2003 BS ISO 11418-1 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 1: DROP-DISPENSING BOTTLES
DIN EN ISO 12180-1:2011-07 Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
BS ISO 10135:1994 Technical drawings. Simplified representation of moulded, cast and forged parts
BS A 294:1984 Specification for spline drive wrenching configuration. Metric series
07/30168045 DC : 0 BS ISO 26622-2 - MODULAR TAPER INTERFACE WITH BALL TRACK SYSTEM - PART 2: DIMENSIONS AND DESIGNATION OF RECEIVERS
12/30262686 DC : 0 BS EN ISO 2692 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR)
BS EN ISO 1179-4:2008 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Stud ends for general use only with metal-to-metal sealing (type B)
BS ISO 5294:2012 Synchronous belt drives. Pulleys
DIN EN ISO 12780-1:2014-04 Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
16/30339565 DC : 0 BS ISO 12297-2 - ROLLING BEARINGS - CYLINDRICAL ROLLERS - PART 2: CERAMIC ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
UNE-EN 15904:2011 Glass packaging - Standard tolerances for flaconnage
BS EN ISO 8062-3:2007 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General dimensional and geometrical tolerances and machining allowances for castings
DIN ISO 6622-1:1990-06 INTERNAL COMBUSTION ENGINES; PISTON RINGS; RECTANGULAR RINGS
BS ISO 28703:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal-shock resistance of porous ceramics
I.S. EN 62007-2:2009 SEMICONDUCTOR OPTOELECTRONIC DEVICES FOR FIBRE OPTIC SYSTEM APPLICATIONS - PART 2: MEASURING METHODS
I.S. EN ISO 1938-2:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
CEI EN 60368-3 : 2011 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 3: STANDARD OUTLINES AND LEAD CONNECTIONS
BS A 296:1986 Specification for tolerances of form and position for bolts and screws. Metric series
BS ISO 26622-2:2008 Modular taper interface with ball track system Dimensions and designation of receivers
BS ISO 14137:2015 Test conditions for wire electrical-discharge machines (wire EDM). Testing of the accuracy
15/30324532 DC : 0 BS ISO 20808 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FRICTION AND WEAR CHARACTERISTICS OF MONOLITHIC CERAMICS BY BALL-ON-DISC METHOD
13/30277311 DC : 0 BS ISO 17447-2 - ROAD VEHICLES - GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 2: BASIC CHARACTERISTICS AND DIMENSIONS FOR CERAMIC-SHEATH-TYPE GLOW-PLUGS
BS EN 61274-1:2012 Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors Generic specification
BS EN 62148-17:2014 Fibre optic active components and devices. Package and interface standards Transmitter and receiver components with dual coaxial RF connectors
14/30297134 DC : 0 BS EN 60086-2 - PRIMARY BATTERIES - PART 2: PHYSICAL AND ELECTRICAL SPECIFICATIONS
BS ISO 22514-1:2014 Statistical methods in process management. Capability and performance General principles and concepts
17/30345656 DC : 0 BS EN 62148-1 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 1: GENERAL AND GUIDANCE
BS DD209(1992) : 1992 PISTON RINGS UP TO 200 MM DIAMETER FOR RECIPROCATING INTERNAL COMBUSTION ENGINES - SPECIFICATION FOR HALF KEYSTONE RINGS
96/709825 DC : DRAFT JUL 1996 ISO/CD 6164-2 - HYDRAULIC FLUID POWER - ONE-PIECE SQUARE-FLANGE CONNECTORS - PART 2: FOUR-SCREW SQUARE-FLANGE CONNECTORS FOR USE AT PRESSURES OF 31,5 MPA (315 BAR) TO 40 MPA (400 BAR), DN 10 TO DN 80
03/300452 DC : DRAFT JAN 2003 IEC 62150-2 ED.1.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 2: ATM-PON TRANSCEIVERS
BS EN 61314-1:2012 Fibre optic interconnecting devices and passive components. Fibre optic fan-outs Generic specification
BS 6494-4:1989 Hydraulic fluid power valve mounting surfaces. Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves
BS 5341-8.1:1992 Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for multi-piece oil control rings. Specification for coil-spring-loaded oil control rings
BS EN ISO 17450-3:2016 Geometrical product specifications (GPS). General concepts Toleranced features
BS EN ISO 1179-3:2008 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
04/30112380 DC : 0 ISO 3070-1 - TEST CONDITIONS FOR BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE - TESTING OF ACCURACY - PART 1: TABLE-TYPE MACHINES
BS ISO 26623-2:2014 Polygonal taper interface with flange contact surface Dimensions and designation of receivers
BS ISO 14279:2002 Aerospace. Drives, internal, cruciform. Metric series
08/30174605 DC : DRAFT SEP 2008 BS ISO 5597 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES
UNE-EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)
UNE-ISO 1708:2012 Acceptance conditions for general purpose parallel lathes -- Testing of the accuracy
BS ISO 10110-12 : 2007 OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 12: ASPHERIC SURFACES
ISO 3442-1:2005 Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 1: Manually operated chucks with tongue and groove type jaws
BS DD212(1992) : 1992 PISTON RINGS UP TO 200mm DIAMETER FOR RECIPROCATING INTERNAL COMBUSTION ENGINES: SPECIFICATION FOR EXPANDER/SEGMENT OIL CONTROL RINGS
BS 5341-7.3.1:1992 Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for single piece rings. Keystone and half keystone compression rings Specification for keystone rings
BS EN 61240:2012 Piezoelectric devices. Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection. General rules
BS ISO 14278:2002 Aerospace. Gauges, for internal offset cruciform ribbed or unribbed drives. Metric series
07/30168051 DC : 0 BS ISO 26623-2 - POLYGONAL TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 2: DIMENSIONS AND DESIGNATION OF RECEIVERS
DIN 41612-6:1990-06 TWO-PART CONNECTORS FOR PRINTED BOARD; GRID 2,54 MM; DIMENSIONS OF TYPES Q, R AND S
PREN 2604 : 200P1 AEROSPACE SERIES - STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - 8 DEGREES 30 MINUTES UNION INTERFACE - DIMENSIONS
PREN 2603 : 200P1 AEROSPACE SERIES - STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - PORT END - DIMENSIONS
CSA C62155 : 2006 : R2015 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
IEC 60131-1:1984 Lever switches. Part 1: General requirements and rules for the preparation of detail specifications
PREN 2602 : 200P1 AEROSPACE SERIES - PORTS FOR INSTALLATION OF STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - DIMENSIONS
PREN 6072 : 200P2 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING
I.S. EN 62074-1:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
PREN 9300-110 : 200P2 AEROSPACE SERIES - LOTAR - LONG TERM ARCHIVING AND RETRIEVAL OF DIGITAL TECHNICAL PRODUCT DOCUMENTATION SUCH AS 3D, CAD AND PDM DATA - PART 110: CAD MECHANICAL 3D EXPLICIT GEOMETRY INFORMATION
IEEE DRAFT 1101.10 : D5.0 MAY 96 DRAFT STANDARD FOR ADDITIONAL MECHANICAL SPECIFICATIONS FOR MICROCOMPUTERS USING THE 1101.1 EQUIPMENT PRACTICE
I.S. EN 16313:2013 CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G 3/4 A AND INSIDE CONE
I.S. EN 62134-1:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
16/30208484 DC : 0 BS EN 15654-2 - RAILWAY APPLICATIONS - MEASUREMENT OF VERTICAL FORCES ON WHEELS AND WHEELSETS - PART 2: TEST IN WORKSHOP FOR NEW, MODIFIED AND MAINTAINED VEHICLES
ISO 19347:2015 Synchronous belt drives Imperial pitch trapezoidal profile system Belts and pulleys
ISO 14137:2015 Test conditions for wire electrical-discharge machines (wire EDM) — Testing of the accuracy
I.S. EN 61462:2007 COMPOSITE HOLLOW INSULATORS - PRESSURIZED AND UNPRESSURIZED INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGE GREATER THAN 1 000 V - DEFINITIONS, TEST METHODS, ACCEPTANCE CRITERIA AND DESIGN RECOMMENDATIONS
I.S. EN ISO 6149-1:2007 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
I.S. EN ISO 10135:2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
EN 62077:2016 Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification
CAN/CSA-ISO 5360:16 ANAESTHETIC VAPORIZERS - AGENT-SPECIFIC FILLING SYSTEMS
AWS C4.6M : 2006 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES
ISO 7994:1985 Aerospace Internal drive, offset cruciform recess (Torq-Set) for rotary fastening devices Metric series
IEC TS 61462:1998 Composite insulators - Hollow insulators for use in outdoor and indoor electrical equipment - Definitions, test methods, acceptance criteria and design recommendations
I.S. EN 61977:2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FILTERS - GENERIC SPECIFICATION
I.S. EN 62077:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
I.S. EN 61754-34:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 34: TYPE URM CONNECTOR FAMILY
ISO 16063-1:1998 Methods for the calibration of vibration and shock transducers Part 1: Basic concepts
ISO 230-1:2012 Test code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
I.S. EN ISO 14405-1:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO/DIS 14405-1:2013)
UNE-EN ISO 286-2:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
I.S. EN ISO 1797:2017 DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017)
I.S. EN 60368-3:2010 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 3: STANDARD OUTLINES AND LEAD CONNECTIONS
I.S. EN ISO 14405-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
UNE-ISO 22514-1:2017 Statistical methods in process management -- Capability and performance -- Part 1: General principles and concepts
BS 2000-49(2000) : 2000 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
ISO 12257:2008 Aerospace Internal six-lobe drives Metric series
BS 2000-49(2007) : 2007 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
I.S. EN ISO 17450-3:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS PART 3: TOLERANCED FEATURES (ISO 17450-3:2016)
ONORM EN ISO 14405-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
I.S. EN 62148-12:2004 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 12: LASER TRANSMITTERS WITH COAXIAL RF CONNECTOR
BS EN 61076-1:2006 Connectors for electronic equipment. Product requirements Generic specification
ISO 16853:2010 Textile machinery Sliver cans, rectangular Main dimensions and tolerances
NF ISO 2940-2 : 2004 MILLING CUTTERS MOUNTED ON CENTRING ARBORS HAVING A 7/24 TAPER - PART 2: INSERTED TOOTH CUTTERS
NF ISO 2924 : 2004 SOLID AND SEGMENTAL SAWS FOR COLD CUTTING OF METALS - INTERCHANGEABILITY DIMENSIONS OF THE DRIVE - SAWS DIAMETER RANGE 224 TO 2240 MM
UNE-EN ISO 2538-2:2015 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
UNE-ISO 3442-2:2013 Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 2: Power-operated chucks with tongue and groove type jaws
UNE-EN ISO 12181-1:2012 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010)
BIS IS 10187 : 2013 HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES
UNI EN ISO 12180-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM
I.S. EN ISO 25178-1:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 1: INDICATION OF SURFACE TEXTURE (ISO 25178-1:2016)
UNE-EN ISO 14405-2:2015 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
ISO 10372:1992 Hydraulic fluid power — Four- and five-port servovalves — Mounting surfaces
ISO 14978:2006 Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment
I.S. EN ISO 1179-2:2013 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013)
ISO 6414:1982 Technical drawings for glassware
NF EN ISO 8362-1 : 2010 AMD 1 2016 INJECTION CONTAINERS AND ACCESSORIES - PART 1: INJECTION VIALS MADE OF GLASS TUBING
ISO 6627:2011 Internal combustion engines Piston rings Expander/segment oil-control rings
ISO 7465:2007 Passenger lifts and service lifts — Guide rails for lift cars and counterweights — T-type
I.S. EN ISO 2808:2007 PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS
EN 61837-2:2011/A1:2014 SURFACE MOUNTED PIEZOELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTION - STANDARD OUTLINES AND TERMINAL LEAD CONNECTIONS - PART 2: CERAMIC ENCLOSURES (IEC 61837-2:2011/A1:2014)
DIN EN 13262:2011-06 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
BS EN 14200:2004 Railway applications. Suspension components. Parabolic springs, steel
BS EN ISO 1302:2002 Geometrical product specifications (GPS). Indication of surface texture in technical product documentation
BS EN ISO 5360:2016 Anaesthetic vaporizers. Agent-specific filling systems
BS EN ISO 9187-1:2010 Injection equipment for medical use Ampoules for injectables
BS EN 196-1:2016 Methods of testing cement Determination of strength
BS EN 3848:2001 Aerospace series. Semi-finished metallic products. Methods of measuring form deviations
ISO 10579:2010 Geometrical product specifications (GPS) Dimensioning and tolerancing Non-rigid parts
IEC 60122-3:2010 Quartz crystal units of assessed quality - Part 3: Standard outlines and lead connections
IEC 62496-4:2011 Optical circuit boards - Part 4: Interface standards - General and guidance
BS EN ISO 8362-1 : 2009 INJECTION CONTAINERS AND ACCESSORIES - PART 1: INJECTION VIALS MADE OF GLASS TUBING (ISO 8362-1:2009)
IEC 60320-3:2014 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
BS EN ISO 4759-3:2000 Tolerances for fasteners Plain washers for bolts, screws and nuts. Product grades A and C
BS EN 14765 : 2005 BICYCLES FOR YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS
BS EN ISO 2808:2007 Paints and varnishes. Determination of film thickness
UNE-EN 16313:2014 Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone
IEC 60679-3:2012 Quartz crystal controlled oscillators of assessed quality - Part 3: Standard outlines and lead connections
BS EN ISO 2692:2014 Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
BS EN 12420:2014 Copper and copper alloys. Forgings
ISO/TS 12180-1:2003 Geometrical Product Specifications (GPS) Cylindricity Part 1: Vocabulary and parameters of cylindrical form
DIN EN 12020-2:2008-06 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 2: TOLERANCES ON DIMENSIONS AND FORM
EN 50243:2002 Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers
EN 62496-1:2009 Optical circuit boards - Part 1: General
EN ISO 12181-1 : 2011 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
EN 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
CEN/TS 15718:2011 Railway applications - Wheelsets and bogies - Product requirements for cast wheels
EN 61314-1:2012 Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification
EN 62134-1:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
DIN EN 14781:2006-03 RACING BICYCLES - SAFETY REQUIREMENTS AND TEST METHODS
EN 1071-12:2010 Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test
CEN ISO/TS 12181-1:2007 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/TS 12181-1:2003)
CEN ISO/TS 12780-1:2007 Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO/TS 12780-1:2003)
EN ISO 14638:2015 Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)
EN 61837-3:2015 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 3: Metal enclosures
CEN ISO/TS 12781-1:2007 Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO/TS 12781-1:2003)
DIN EN ISO 15732:2005-09 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003)
EN ISO 5360:2016 Anaesthetic vaporizers - Agent-specific filling systems (ISO 5360:2016)
EN 1280-1:1997/A1:2000 AGENT SPECIFIC FILLING SYSTEMS FOR ANAESTHETIC VAPORIZERS - PART 1: RECTANGULAR KEYED FILLING SYSTEMS
EN 61076-7-001:2004 Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification
EN 62148-17:2014 Fiber optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors
EN ISO 12780-1:2011 Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
EN 62149-6:2003 Fibre optic active components and devices - Performance standards - Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers
EN 12020-2:2016/AC:2017 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 2: TOLERANCES ON DIMENSIONS AND FORM
EN 60679-3:2013 Quartz crystal controlled oscillators of assessed quality - Part 3: Standard outlines and lead connections
EN 62007-2:2009 Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods
EN 62231:2006 Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria
EN 60320-2-2:1998 Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment
EN 60874-1:2012 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
EN 62148-16 : 2009 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 16: TRANSMITTER AND RECEIVER COMPONENTS FOR USE WITH LC CONNECTOR INTERFACE
EN 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
EN 62148-4:2003 Fibre optic active components and devices - Package and interface standards - Part 4: PN 1x9 plastic optical fibre transceivers
EN 60368-3:2010 Piezoelectric filters of assessed quality - Part 3: Standard outlines and lead connections
EN 14766 : 2005 MOUNTAIN-BICYCLES - SAFETY REQUIREMENTS AND TEST METHODS
EN 61240:2017 Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - General rules
I.S. EN ISO 1302:2002 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION
EN 61076-7:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification
EN 12101-7:2011 Smoke and heat control systems - Part 7: Smoke duct sections
EN ISO 8362-1:2009/A1:2015 INJECTION CONTAINERS AND ACCESSORIES - PART 1: INJECTION VIALS MADE OF GLASS TUBING (ISO 8362-1:2009/AMD 1:2015)
EN 181000:1994 Generic Specification: Fibre optic branching devices
ONORM EN ISO 8098 : 2014 CYCLES - SAFETY REQUIREMENTS FOR BICYCLES FOR YOUNG CHILDREN (ISO 8098:2014)
NBR ISO 18669-2 : 2010 ERRATA 1 2012 INTERNAL COMBUSTION ENGINES - PISTON PINS - PART 2: INSPECTION MEASURING PRINCIPLES
EN 180000:1995 Generic specification: Fibre optic attenuators
UNI EN 16482 : 2014 FOUNDING - CONTINUOUS CAST IRON BARS
12/30242897 DC : 0 BS ISO 6624-2 - INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 2: HALF KEYSTONE RINGS MADE OF CAST IRON
03/106306 DC : DRAFT APR 2003 BS ISO 11418-4 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 4: TABLET BOTTLES
09/30210593 DC : DRAFT SEP 2009 BS EN 62150-2 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 2: ATM-PON TRANSCEIVERS
09/30198152 DC : DRAFT MAY 2009 BS EN ISO 12181-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 1: VOCABULARY AND PARAMETERS OF ROUNDNESS
BS ISO 6621-2:2003 Internal combustion engines. Piston rings Inspection measuring principles
CEI EN 62496-1 : 2010 OPTICAL CIRCUIT BOARDS - PART 1: GENERAL
I.S. EN 14764:2006 CITY AND TREKKING BICYCLES - SAFETY REQUIREMENTS AND TEST METHODS
DIN ISO 6149-1:1996-11 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH O-RING SEAL IN TRUNCATED HOUSING
PD ISO/TS 17863:2013 Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies
DIN ISO 2768-2:1991-04 General tolerances; geometrical tolerances for features without individual tolerances indications; identical with ISO 2768-2:1989
DIN ISO 128-22:1999-11 Technical drawings - General principles of presentation - Part 22: Basic conventions and applications for leader lines and reference lines (ISO 128-22:1999)
BS ISO 6149-3:1993 Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Light-duty (L series) stud ends. Dimensions, design, test methods and requirements
14/30258493 DC : 0 BS EN 14033-1 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING
I.S. EN 50066:1993 MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES SAFETY REQUIREMENTS FOR RADIO TRANSMITTING EQUIPMENT
14/30304194 DC : 0 BS EN 61977 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTICFILTERS - GENERIC SPECIFICATION
BS ISO 3442-1:2005 Machine tools. Dimensions and geometric tests for self-centring chucks with two-piece jaws Manually operated chucks with tongue and groove type jaws
ISO 18535:2016 Diamond-like carbon films Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
07/30170301 DC : DRAFT AUG 2007 BS EN 62007-2 - SEMICONDUCTOR OPTOELECTRONIC DEVICES FOR FIBRE OPTIC SYSTEM APPLICATIONS - PART 2: MEASURING METHODS
DIN EN ISO 2538-2:2015-01 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
BS EN 61076-7:2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications Cable outlet accessories with assessed quality, including qualification and capability approval. Sectional specification
BS 308-4.6(1995) : 1995 TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION OF PIPELINES - GENERAL RULES AND ORTHOGONAL REPRESENTATION
BS EN 1071-13:2010 Advanced technical ceramics. Methods of test for ceramic coatings Determination of wear rate by the pin-on-disk method
BS ISO 29262:2011 Production equipment for microsystems. Interface between end effector and handling system
DIN EN 1071-13:2010-07 Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method
12/30268851 DC BS EN 9300-120. Aerospace series. LOTAR. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. CAD 3D explicit geometry with product and manufacturing information
BS ISO 9980:2012 Belt drives. Grooved pulleys for V-belts (system based on effective width). Geometrical inspection of grooves
DIN EN ISO 1938-1:2016-03 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
NF ISO 10579 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS
DIN EN ISO 5458:2016-08 (Draft) GEOMETRICAL PRODUCT SPECIFICATION (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
BS ISO 19347:2015 Synchronous belt drives. Imperial pitch trapezoidal profile system. Belts and pulleys
ISO 4401:2005 Hydraulic fluid power — Four-port directional control valves — Mounting surfaces
BS ISO 7789:2007 Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities
03/311628 DC : DRAFT AUG 2003 IEC 62150-1 ED.1.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
BS 2A 296:1995 Bolts and screws, metric. Tolerances of form and position
BS EN 12101-7:2011 Smoke and heat control systems Smoke duct sections
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
10/30234189 DC : 0 BS ISO 12488-1 - CRANES - TOLERANCES FOR WHEELS AND TRAVEL AND TRAVERSING TRACKS - PART 1: GENERAL
UNI CEN ISO/TS 17450-1 : 2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION
CEI EN 62150-1 : 2005 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
09/30210291 DC : 0 BS EN 60086-2 ED12 - PRIMARY BATTERIES - PART 2: PHYSICAL AND ELECTRICAL SPECIFICATIONS
12/30244653 DC : 0 BS EN 62679-1 - ELECTRONIC PAPER DISPLAY - PART 1:TERMINOLOGY AND GENERIC SPECIFICATION
11/30219038 DC : 0 BS ISO 5294 - SYNCHRONOUS BELT DRIVES - PULLEYS
12/30245643 DC : 0 BS ISO 17396 - SYNCHRONOUS BELT DRIVES - METRIC PITCH - TOOTH PROFILES T AND AT ENDLESS AND OPEN ENDED BELTS AND PULLEYS
ISO 10303-238:2007 Industrial automation systems and integration Product data representation and exchange Part 238: Application protocol: Application interpreted model for computerized numerical controllers
15/30304603 DC : 0 BS EN 50066 - MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES
11/30246243 DC : 0 BS EN 62148-17 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 17: TRANSMITTER AND RECEIVER COMPONENTS WITH DUAL COAXIAL RF CONNECTORS
ISO 13041-6:2009 Test conditions for numerically controlled turning machines and turning centres Part 6: Accuracy of a finished test piece
DIN EN ISO 8015:2011-09 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
BS ISO 15341:2014 Graphic technology. Method for radius determination of printing cylinders
BS EN 61462:2007 Composite hollow insulators. Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V. Definitions, test methods, acceptance criteria and design recommendations
BS ISO 11418-1:2016 Containers and accessories for pharmaceutical preparations Drop-dispensing glass bottles
BS ISO 8062-4:2017 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General tolerances for castings using profile tolerancing in a general datum system
15/30333838 DC : 0 BS ISO/ASTM 52901 - ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - REQUIREMENTS FOR PURCHASED AM PARTS
05/30128806 DC : DRAFT FEB 2005 ISO 12257 - AEROSPACE - DRIVES, INTERNAL, SIX-LOBE - METRIC SERIES
DIN 55190 : 86 DRAFT 90 MACHINE TOOLS; TOOL CHANGING ON PRESSES; MECHANICAL INTERFACES; CONNECTING DIMENSIONS
PD CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules
BS 4500-1.2(1990) : AMD 7631 ISO LIMITS AND FITS - GENERAL, TOLERANCES AND DEVIATIONS - TABLES OF COMMONLY USED TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
BS EN ISO 12180-1:2011 Geometrical product specifications (GPS). Cylindricity Vocabulary and parameters of cylindrical form
DIN EN 16482:2014-09 FOUNDING - CONTINUOUS CAST IRON BARS
BS EN ISO 1179-1:2013 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Threaded ports
BS ISO 3070-4:1998 Test conditions for boring and milling machines with horizontal spindle. Testing of the accuracy Planer type machines with movable column
13/30278807 DC : 0 BS EN 61837-3 - SURFACE MOUNTED PIEZOELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTI0N - STANDARD OUTLINES AND TERMINAL LEAD CONNECTIONS - PART 3: METAL ENCLOSURE
CEI EN 61076-7 : 2001 CONNECTORS FOR USE IN D/C/, LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 7: CABLE OUTLET ACCESSORIES WITH ASSESSED QUALITY, INCLUDING QUALIFICATION AND CAPABILITY APPROVAL - SECTIONAL SPECIFICATION
96/702226 DC : 0 PREN 4229 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; UNIONS, STRAIGHT BRAZING
I.S. EN 15904:2010 GLASS PACKAGING - STANDARD TOLERANCES FOR FLACONNAGE
11/30232899 DC : 0 BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76
09/30200088 DC : 0 BS EN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
CEI EN 61754-1 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE
CEI EN 62155 : 2004 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
15/30295117 DC : 0 BS EN ISO 5458 - GEOMENTRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL AND PATTERN TOLERANCING
ISO 15341:2014 Graphic technology Method for radius determination of printing cylinders
BS ISO 15407-2:2003 Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces with optional electrical connector
SANS 5725-1 : 1ED 2009 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 1: GENERAL PRINCIPLES AND DEFINITIONS
BS EN 50062:1992 Specification for ceramic pressurized hollow insulators for high-voltage switchgear and controlgear
DIN EN 14879-6:2010-04 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers
BS EN 60862-3:2003 Surface acoustic wave (SAW) filters of assessed quality Standard outlines
13/30283368 DC : 0 BS ISO 13050 - SYNCHRONOUS BELT DRIVE - METRIC PITCH - CURVILINEAR PROFILE SYSTEMS G, H, R AND S - BELTS AND PULLEYS - COMPLEMENTARY ELEMENT
BS ISO 3601-2:2016 Fluid power systems. O-rings Housing dimensions for general applications
BS IEC 62341-1-1 : 2009 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 1-1: GENERIC SPECIFICATIONS
S.R. CEN/TS 15718:2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS
DD CEN ISO/TS 12180-1:2007 Geometrical product specifications (GPS). Cylindricity Vocabulary and parameters of cylindrical form
BS ISO 4156-1:2005 Straight cylindrical involute splines. Metric module, side fit Generalities
13/30246059 DC : 0 BS ISO 15341 - GRAPHIC TECHNOLOGY - METHOD FOR RADIUS DETERMINATION OF PRINTING CYLINDERS
05/30135258 DC : DRAFT JUN 2005 ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS AND ELASTOMERIC SEALING (TYPE E)
BS EN 62148-18:2015 Fibre optic active components and devices. Package and interface standards 40-Gbit/s serial transmitter and receiver components for use with the LC connector interface
BS ISO 10372:1992 Hydraulic fluid power. Four-and five-port servovalves. Mounting surfaces
DIN 874-2:2003-11 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHT EDGES - PART 2: KNIFE EDGE STRAIGHT EDGES - DIMENSIONS, TECHNICAL DELIVERY CONDITIONS
13/30257235 DC : 0 BS EN 62772 - COMPOSITE HOLLOW CORE STATION POST INSULATORS FOR SUBSTATIONS WITH A.C. AND D.C. VOLTAGES GREATER THAN 1000 V - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
EN ISO 7083:1994 Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions (ISO 7083:1983)
12/30264547 DC : DRAFT JUNE 2012 BS ISO 12818 - GLASS PACKAGING - STANDARD TOLERANCES FOR FLACONNAGE
03/306830 DC : DRAFT APR 2003 ISO 18669-2 - INTERNAL COMBUSTION ENGINES - PISTONS PINS - PART 2: INSPECTION MEASURING PRINCIPLES
UNI EN ISO 8062-3 : 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
04/30096361 DC : DRAFT APR 2004 ISO/DIS 15242-3 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 3: RADIAL DOUBLE-ROW SPHERICAL AND TAPERED ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE
DD ENV 14443:2004 Domestic furniture. Seating. Test methods for the determination of durability of upholstery
DIN EN ISO 8098 E : 2014 CYCLES - SAFETY REQUIREMENTS FOR BICYCLES FOR YOUNG CHILDREN (ISO 8098:2014)
BS ISO 17775:2006 Aircraft. Ground-service connections. Potable water, toilet-flush water and toilet drain
ISO 6123-3:1985 Rubber- or plastics-covered rollers — Specifications — Part 3: Dimensional tolerances
BS AU 249:1993 Specification for clutch housings for reciprocating internal combustion engines. Nominal dimensions and tolerances
ISO 11418-3:2016 Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms
BS ISO 26910-1 : 2009 SPRINGS - SHOT PEENING - PART 1: GENERAL PROCEDURES
BS EN ISO 12836:2015 Dentistry. Digitizing devices for CAD/CAM systems for indirect dental restorations. Test methods for assessing accuracy
09/30198254 DC : 0 BS EN 60368-3 ED.4 - PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 3: STANDARD OUTLINES AND LEAD CONNECTIONS
BS ISO 14277:2002 Aerospace. Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives. Metric series
UNI ISO 3655 : 2009 ACCEPTANCE CONDITIONS FOR VERTICAL TURNING AND BORING LATHES WITH ONE OR TWO COLUMNS AND A SINGLE FIXED OR MOVABLE TABLE - GENERAL INTRODUCTION AND TESTING OF THE ACCURACY
DIN CEN ISO/TS 8062-2; DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
BS ISO 17170:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for spherical indentation of porous ceramics
03/106305 DC : DRAFT APR 2003 BS ISO 11418-3 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 3: SCREW-NECK BOTTLES (VERAL) FOR SOLID AND LIQUID DOSAGE FORMS
NF ISO 8015 : 2006 TECHNICAL DRAWINGS - FUNDAMENTAL TOLERANCING PRINCIPLE
BS EN ISO 12781-1:2011 Geometrical product specifications (GPS). Flatness Vocabulary and parameters of flatness
10/30218221 DC : 0 BS EN 61314-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
BS 2M 63:1993 Specification for dimensions of aerospace fluid system port connection, seal and fitting end
10/30234803 DC : 0 BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
14/30262683 DC : 0 BS ISO 8062-4 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 4: GENERAL TOLERANCES FOR CASTINGS USING PROFILE TOLERANCING IN A GENERAL DATUM SYSTEM
13/30288636 DC : 0 BS EN 60876-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
14/30304198 DC : 0 BS EN 62077 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
10/30201346 DC : 0 BS ISO 22514-6 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 6: PROCESS CAPABILITY STATISTICS FOR CHARACTERISTICS FOLLOWING A MULTIVARIATE NORMAL DISTRIBUTION
BS ISO 16063-1 : 1998 METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - BASIC CONCEPTS
12/30246960 DC : 0 BS EN ISO 2538-2 - GEOMETRICAL PRODUCT SPECIFICATIONS - WEDGES - PART 2: DIMENSIONING AND TOLERANCING
08/30184358 DC : 0 BS ISO 9270-1 - 7/24 TAPER SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS S AND SF
DIN EN ISO 12836:2015-11 DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015)
07/30164079 DC : 0 BS ISO 679 - METHODS OF TESTING CEMENTS - DETERMINATION OF STRENGTH
96/702211 DC : 0 PREN 4142 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; UNIONS, TWO WAY
05/30127444 DC : DRAFT JAN 2005 ISO 10303-238 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 238: APPLICATION PROTOCOL - APPLICATION INTERPRETED MODEL FOR COMPUTERIZED NUMERIC CONTROLLERS
12/30210533 DC : 0 BS ISO 10791-7 - TEST CONDITIONS FOR MACHINING CENTRES - PART 7: ACCURACY OF A FINISHED TEST PIECE
DIN EN ISO 1179-1:2014-03 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
BS EN ISO 286-2:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Tables of standard tolerance classes and limit deviations for holes and shafts
UNI EN ISO 10135 : 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
CEI EN 60320-2-2 : 1999 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 2-2: INTERCONNECTION COUPLERS FOR HOUSEHOLD AND SIMILAR EQUIPMENT
08/30189634 DC : 0 BS EN 14033-1 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING
BS ISO 14276:2002 Aerospace. Drives, internal, offset cruciform. Metric series
DD CEN/TS 15718:2011 Railway applications. Wheelsets and bogies. Product requirements for cast wheels
CSA C62155:2006 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
BS QC 480000(1995) : 1995 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 1: GENERIC SPECIFICATION
BS ISO 10959:2016 Aerospace. MJ threads. Gauging
09/30198158 DC : 0 BS EN ISO 12780-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS
08/30184361 DC : 0 BS ISO 9270-2 - 7/24 TAPERS FOR SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 2 - DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS J AND JF
CEI EN 61073-1 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - MECHANICAL SPLICES AND FUSION SPLICE PROTECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
06/30133711 DC : DRAFT JUL 2006 ISO 21003-2 - MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES
BS ISO 12164-1:2001 Hollow taper interface with flange contact surface Shanks. Dimensions
I.S. EN ISO 7083:1995 TECHNICAL DRAWINGS - SYMBOLS FOR GEOMETRICAL TOLERANCING - PROPORTIONS AND DIMENSIONS
CEI EN 61314-1 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
BS EN 181000:1995 Harmonized system of quality assessment for electronic components. Generic specification. Fibre optic branching devices
CEI EN 62007-2 : 2010 SEMICONDUCTOR OPTOELECTRONIC DEVICES FOR FIBRE OPTIC SYSTEM APPLICATIONS - PART 2: MEASURING METHODS
I.S. EN ISO 1179-4:2008 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
07/30168048 DC : 0 BS ISO 26623-1 - POLYGONAL TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS
96/702214 DC : 0 PREN 4145 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; NUTS, SWIVEL
00/244417 DC : DRAFT SEP 2000 IEC 62149-3-4 - BASIC STANDARDS FOR DISCRETE/INTEGRATED OPTOELECTRONIC SEMICONDUCTOR DEVICES FOR FIBRE OPTIC COMMUNICATIONS INCLUDING HYBRID DEVICES - PART 3-4: PACKAGE INTERFACE STANDARDS - INTERFACE STANDARD FOR SC-SIP 9 PIN FIBRE OPTIC TERMINAL DEVICE
07/30173607 DC : 0 BS EN 15718 - RAILWAY APPLICATIONS - MONOBLOCK WHEEL PRODUCTS - CAST WHEELS
PREN 2645 : 200P1 AEROSPACE SERIES - STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - LOCKING RING - DIMENSIONS
BS ISO 3019-2:2001 Hydraulic fluid power. Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors Metric series
BS EN 61978-1:2014 Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators Generic specification
BS ISO 4156-3:2005 Straight cylindrical involute splines. Metric module, side fit Inspection
BS 6494-6:1989 Hydraulic fluid power valve mounting surfaces Specification for pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves
03/115230 DC : DRAFT SEP 2003 BS EN 14781 - RACING BICYCLES - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 62099:2001 Fibre optic wavelength switches. Generic specification
EN ISO 2692:2014 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
BS 2000-49(2015) : 2015 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
BS EN 175500:1997 Harmonized system of quality assessment for electronic components. Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval
I.S. EN ISO 6412-1:2018 TECHNICAL PRODUCT DOCUMENTATION - SIMPLIFIED REPRESENTATION OF PIPELINES - PART 1: GENERAL RULES AND ORTHOGONAL REPRESENTATION (ISO 6412-1:2017)
DIN V 76622:1990-06 INTERNAL COMBUSTION ENGINES - PISTON RINGS - RECTANGULAR RINGS WITH NARROW RING WIDTH
DIN EN ISO 12781-1:2011-07 Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
EN ISO 5458 : 1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING (ISO 5458:1998)
PREN 6096 : DRAFT 2018 AEROSPACE SERIES - BEARING, SPHERICAL PLAIN WITH SELF-LUBRICATING LINER, EXTRA WIDE INNER RING IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES
DIN ISO 15786:2014-12 TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION AND DIMENSIONING OF HOLES (ISO 15786:2008)
UNE-ISO 230-10:2016 Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools.
DIN ISO 3442-2:2010-08 Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 2: Power-operated chucks with tongue and groove type jaws (ISO 3442-2:2005)
I.S. EN 62150-2:2011 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 2: ATM-PON TRANSCEIVERS
NF EN 61202-1 : 2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
IEC PAS 62074-1:2007 Fibre optic WDM devices - Part 1: Generic specification
UNI ISO 10579 : 1995 TECHNICAL DRAWINGS - DIMENSIONS AND TOLERANCING - NON-RIGID-PARTS
NF ISO 2940-1 : 2004 MILLING CUTTERS MOUNTED ON CENTRING ARBORS HAVING A 7/24 TAPER - FITTING DIMENSIONS - PART 1: CENTRING ARBORS
UNE-EN ISO 286-1:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
ISO 1797:2017 Dentistry — Shanks for rotary and oscillating instruments
I.S. EN 61269-1:1999 FIBRE OPTIC TERMINUS SETS - PART 1: GENERIC SPECIFICATION
ISO 3070-1:2007 Machine tools Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Part 1: Machines with fixed column and movable table
SAE J 515 : 2015 SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS
CEI EN 50066 : 1997 MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES
BS ISO 230-10:2016 Test code for machine tools Determination of the measuring performance of probing systems of numerically controlled machine tools
I.S. EN 60875-1:2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
BS EN ISO 14405-2:2011 Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes
I.S. EN 61314-1:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION (IEC 61314-1:2011 (EQV))
S.R. CEN ISO/TS 8062-2:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
I.S. EN 60122-3:2010 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 3: STANDARD OUTLINES AND LEAD CONNECTIONS
I.S. EN ISO 1179-1:2013 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS (ISO 1179-1:2013)
I.S. EN 62231:2007 COMPOSITE STATION POST INSULATORS FOR SUBSTATIONS WITH A.C. VOLTAGES GREATER THAN 1 000 V UP TO 245 KV - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
I.S. EN 62496-4:2011 OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE
ISO 6149-1:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal
BS EN ISO 5458:1999 Geometrical product specifications (GPS). Geometrical tolerancing. Positional tolerancing
ISO 10110-6:2015 Optics and photonics Preparation of drawings for optical elements and systems Part 6: Centring tolerances
CEI EN 61747-1 : 2004 LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 1: GENERIC SPECIFICATION
ISO/TR 6627:1992 Internal combustion engines Piston rings Expander/segment oil control rings
ISO 6624-2:2016 Internal combustion engines Piston rings Part 2: Half keystone rings made of cast iron
IEC 60906-2:2011 IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs and socket-outlets 15 A 125 V a.c. and 20 A 125 V a.c.
I.S. EN 50243:2002 OUTDOOR BUSHINGS FOR 24 KV AND 36 KV AND FOR 5 KA AND 8 KA, FOR LIQUID FILLED TRANSFORMERS
ISO 6622-2:2013 Internal combustion engines — Piston rings — Part 2: Rectangular rings made of steel
UNI ISO 7465 : 2010 PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE
I.S. EN 60086-2:2016 PRIMARY BATTERIES - PART 2: PHYSICAL AND ELECTRICAL SPECIFICATIONS
DIN EN ISO 14405-2:2012-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
ISO/ASTM 52901:2017 Additive manufacturing — General principles — Requirements for purchased AM parts
BS EN 15904:2010 Glass packaging. Standard tolerances for flaconnage
IEC 62149-6:2003 Fibre optic active components and devices - Performance standards - Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers
I.S. EN 62148-18:2015 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 18: 40-GBIT/S SERIAL TRANSMITTER AND RECEIVER COMPONENTS FOR USE WITH THE LC CONNECTOR INTERFACE
ISO/IEC 29171:2009 Information technology Digitally recorded media for information interchange and storage Information Versatile Disk for Removable usage (iVDR) cartridge
UNE-EN ISO 12180-1:2012 Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
EN IEC 62148-1:2018 Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance
IEC 61747-1-1:2014 Liquid crystal display devices - Part 1-1: Generic - Generic specification
BS EN 60875-1:2015 Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre optic branching devices Generic specification
I.S. EN 175300:1998 RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ (SECTIONAL SPECIFICATION)
IEEE DRAFT 1301.4 : D2.1 APR 96 DRAFT STANDARD FOR A METRIC EQUIPMENT PRACTICE FOR MICROCOMPUTERS - COORDINATION DOCUMENT FOR MEZZANINE CARDS
ISO 14457:2017 Dentistry — Handpieces and motors
UNI EN ISO 14978 : 2006 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
ISO/TR 17209:2013 Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities with ISO 725 (UN and UNF) threads
ISO 10791-7:2014 Test conditions for machining centres Part 7: Accuracy of finished test pieces
ISO 10303-223:2008 Industrial automation systems and integration — Product data representation and exchange — Part 223: Application protocol: Exchange of design and manufacturing product information for cast parts
ISO 8362-1:2009 Injection containers and accessories Part 1: Injection vials made of glass tubing
EN 1426:2015 Bitumen and bituminous binders - Determination of needle penetration
IEC 61462:2007 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
NF EN 13262 : 2004 + A2 2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
ISO 26910-1:2009 Springs — Shot peening — Part 1: General procedures
ISO 492:2014 Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
DIN EN ISO 10360-6:2009-01 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES
CSA C22.2 No. 60320-1 : 2011 : R2016 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 7711-2:2011-10 Dentistry - Rotary diamond instruments - Part 2: Discs (ISO 7711-2:2011)
BS EN ISO 9409-1:2004 Manipulating industrial robots. Mechanical interfaces Plates
IEC 61837-3:2015 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 3: Metal enclosures
BS EN ISO 9974-1:2000 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Threaded ports
UNE-EN ISO 2692:2015 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
ISO 8062-3:2007 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings
UNE-EN 60086-2:2011 Primary batteries - Part 2: Physical and electrical specifications
IEC 62148-12:2004 Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector
ONORM EN 13262 : 2012 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
I.S. EN ISO 4759-3:2016 TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F (ISO 4759-3:2016)
I.S. EN 12020-2:2016 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 2: TOLERANCES ON DIMENSIONS AND FORM
I.S. EN ISO 8536-1:2011 INFUSION EQUIPMENT FOR MEDICAL USE - PART 1: INFUSION GLASS BOTTLES (ISO 8536-1:2011)
I.S. EN ISO 9013:2017 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
DIN ISO 3070-3:2003-05 MACHINE TOOLS - TEST CONDITIONS FOR BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE; TESTING OF THE ACCURACY - PART 3: FLOOR-TYPE MACHINES WITH DETACHED, STATIONARY WORK-HOLDING TABLE
DIN ISO 3070-2:2003-05 MACHINE TOOLS - TEST CONDITIONS FOR BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE; TESTING OF THE ACCURACY - PART 2: TABLE-TYPE MACHINES
DIN EN ISO 6149-1:2007-05 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
I.S. EN 1426:2015 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
DIN EN 12420:1999-03 COPPER AND COPPER ALLOYS - FORGINGS
I.S. EN ISO 9187-1:2010 INJECTION EQUIPMENT FOR MEDICAL USE - PART 1: AMPOULES FOR INJECTABLES
DIN ISO 16792:2008-12 TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
I.S. EN 22768-2:1994 GENERAL TOLERANCES - GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
I.S. EN ISO 10303-210:2002 INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 210: APPLICATION PROTOCOL: ELECTRONIC ASSEMBLY, INTERCONNECTION, AND PACKAGING DESIGN
DIN ISO 3070-4:2003-05 MACHINE TOOLS - TEST CONDITIONS FOR BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE; TEST OF THE ACCURACY - PART 4: PLANER TYPE MACHINES WITH MOVABLE COLUMN
I.S. EN ISO 2692:2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014)
EN 22768-2:1993 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)
DIN EN 12390-1:2012-12 Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds
I.S. EN ISO 9409-1:2004 MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES
I.S. EN ISO 1660:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017)
I.S. EN ISO 5360:2016 ANAESTHETIC VAPORIZERS - AGENT-SPECIFIC FILLING SYSTEMS (ISO 5360:2016)
I.S. EN ISO 8362-4:2011 INJECTION CONTAINERS AND ACCESSORIES - PART 4: INJECTION VIALS MADE OF MOULDED GLASS (ISO 8362-4:2011)
DIN ISO 16853:2011-07 Textile machinery - Sliver cans, rectangular - Main dimensions and tolerances (ISO 16853:2010)
I.S. EN 12390-1:2012 TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS
I.S. EN 12420:2014 COPPER AND COPPER ALLOYS - FORGINGS
DIN EN ISO 9409-1:1997-06 MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERACES - PART 1: PLATES
I.S. EN 196-1:2016 METHODS OF TESTING CEMENT - PART 1: DETERMINATION OF STRENGTH
DIN EN ISO 9409-2:2003-10 MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 2: SHAFTS
BS 308-3:1990 Engineering drawing practice Recommendations for geometrical tolerancing
BS 308-1:1984 Engineering drawing practice Recommendations for general principles
VDI/VDE 2631-10 : 2014 COR 2015 FORM MEASUREMENT - DETERMINATION OF THE UNCERTAINTY OF FORM MEASUREMENTS
BS 308-2:1985 Engineering drawing practice Recommendations for dimensioning and tolerancing of size
VDI/VDE 2631 Blatt 6:2016-08 Form measurement - Determination of the straightness deviation of the linear guide
VDI/VDE 2631 Blatt 4:2014-06 Form measurement - Determination of the radial spindle deviation
VDI 3576:2011-03 Rails for crane systems - Rail connections, rail beddings, rail fastenings, tolerances for crane tracks
VDE 0625-10 : 1994 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES; MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES
VDI/VDE/DGQ 2618 Blatt 5.1:2013-09 Inspection of measuring and test equipment - Test instruction for straight edges
VDI/VDE 2629 Blatt 2:2012-06 Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces
VDE 0625-2-2 : 1999 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 2-2: INTERCONNECTION COUPLERS FOR HOUSEHOLD AND SIMILAR EQUIPMENT
VDI/VDE/DGQ 2618 Blatt 4.6:2014-11 Inspection of measuring and test equipment - Test instruction for test cylinders and test mandrels
VDI/VDE/DGQ 2618 Blatt 7.1:2010-12 INSPECTION OF MEASURING AND TEST EQUIPMENT - TEST INSTRUCTION FOR STEEL SQUARES 90 DEGREE
OVE/ONORM EN 60086-2 : 2012 PRIMARY BATTERIES - PART 2: PHYSICAL AND ELECTRICAL SPECIFICATIONS (IEC 60086-2:2011)
DIN EN 60320-2-2 : 1999 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 2-2: INTERCONNECTION COUPLERS FOR HOUSEHOLD AND SIMILAR EQUIPMENT
VDI/VDE 2617 Blatt 11:2011-03 Accuracy of coordinate measuring machines - Characteristics and their checking - Determination of the uncertainty of measurement for coordinate measuring machines using uncertainty budgets
VDI/VDE 2631 Blatt 7:2012-02 Form measurement - Determination of positional deviations of the form-measurement axes
VDI 3414 Blatt 1:2014-02 (Draft) Quality evaluation of wooden surfaces - Surface characteristics
BS 7011-2.2:1998 Consumable accessories for light microscopes. Slides Specification for materials and quality of finish
VDI 3393:2016-10 Limiting of grinding errors
BS 4656-24:1993 Accuracy of machine tools and methods of test Specification for cylindrical external centreless grinding machines
VDI/VDE/DGQ 2618 Blatt 5.2:2013-08 Inspection of measuring and test equipment - Test instruction for knife edge straight edges
DIN EN 50066 : 1994 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES; MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES
VDI/VDE/DGQ 2618 Blatt 16.1:2009-10 Inspection of measuring and test equipment - Test instruction for height gauges
VDI/VDE 2631 Blatt 9:2014-10 Form measurement - Examples for measurement and analysis conditions
NF EN 50243 : 2004 OUTDOOR BUSHINGS FOR 24 KV AND 36 KV AND FOR 5 KA AND 8 KA, FOR LIQUID FILLED TRANSFORMERS
VDI 3405 Blatt 2:2013-08 Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing
VDI/VDE 2631 Blatt 1:2016-08 Form measurement - Principles
BS CECC 22000:1993 Harmonized system of quality assessment for electronic components. Generic specification. Radio frequency coaxial connectors (Parts I, II and III)
VDI/VDE 2629 Blatt 1:2008-08 Accuracy of contour-measuring systems - Characteristics and checking of characteristics - Acceptance testing and reverification testing of contour-measuring systems according to the tactile stylus method
BS 3900-C5(2007) : 2007 PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS
BS 6615:1996 Specification for dimensional tolerances for metal and metal alloy castings
ISO 6164:1994 Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
UNE-EN 16482:2014 Founding - Continuous cast iron bars
I.S. EN ISO 12180-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM
DIN EN ISO 12818 E : 2015 GLASS PACKAGING - STANDARD TOLERANCES FOR FLACONNAGE (ISO 12818:2013)
96/702217 DC : 0 PREN 4148 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; TEES
BS EN 62074-1:2014 Fibre optic interconnecting devices and passive components. Fibre optic WDM devices Generic specification
BS ISO 10578:1992 Technical drawings. Tolerancing of orientation and location. Projected tolerance zone
17/30348149 DC : 0 BS ISO 3096 - ROLLING BEARINGS - NEEDLE ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
I.S. EN 62148-16:2009 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 16: TRANSMITTER AND RECEIVER COMPONENTS FOR USE WITH LC CONNECTOR INTERFACE
15/30331399 DC : 0 BS EN 6096 - AEROSPACE SERIES - BEARINGS SPHERICAL PLAIN WITH SELF-LUBRICATING LINER EXTRA WIDE INNER RING IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES
UNI EN ISO 17450-1 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION
12/30259955 DC : 0 BS EN 61754-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE
09/30200395 DC : 0 BS EN 61837-2 ED. 2 - SURFACE MOUNTED PIEZOELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTION - STANDARD OUTLINES AND TERMINAL LEAD CONNECTIONS - PART 2: CERAMIC ENCLOSURES
ONORM EN ISO 14978 : 2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
08/30160607 DC : DRAFT MAY 2008 BS ISO 26910-1 - SPRINGS - SHOT PEENING - PART 1: GENERAL PROCEDURES
DIN ISO 7368:1994-02 HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES
12/30268616 DC BS EN 61747-1-1. Liquid crystal display devices. Generic. Generic specification
ISO 10303-519:2000 Industrial automation systems and integration — Product data representation and exchange — Part 519: Application interpreted construct: Geometric tolerances
DIN EN ISO 8062-3 E : 2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
17/30348146 DC : 0 BS ISO 7063 - ROLLING BEARINGS - NEEDLE ROLLER BEARING TRACK ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
BS ISO 464:2015 Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
I.S. EN 14781:2006 RACING BICYCLES - SAFETY REQUIREMENTS AND TEST METHODS
09/30199060 DC : 0 BS ISO 11926-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS
98/716688 DC : DRAFT NOV 1998 ISO/DIS 6624-1 - INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 1: KEYSTONE RINGS MADE OF CAST IRON
BS EN 16313:2013 Connections for heating and cooling appliances. Detachable connection with outside threaded pipe G ¾ A and inside cone
BS EN ISO 18391:2016 Geometrical product specifications (GPS). Population specification
I.S. EN ISO 17296-3:2016 ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014)
DD ISO/TS 15530-4:2008 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Evaluating task-specific measurement uncertainty using simulation
DIN ISO 12164-4 E : 2016 HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 4: DIMENSIONS OF RECEIVERS FOR STATIONARY TOOLS (ISO 12164-4:2014)
BS EN ISO 1938-2:2017 Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges
DIN ISO 29262:2013-03 Production equipment for microsystems - Interface between end effector and handling system (ISO 29262:2011)
AWS C4.6M:2006(R2012) THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES
DD ISO/TS 17450-1 : 2005 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION
BS ISO 15407-1:2000 Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces without electrical connector
BS EN ISO 12181-1:2011 Geometrical product specifications (GPS). Roundness Vocabulary and parameters of roundness
12/30255489 DC : 0 BS ISO 11090-2 - TEST CONDITIONS FOR DIE SINKING ELECTRO-DISCHARGE MACHINES (EDM) - TERMINOLOGY AND TESTING OF ACCURACY - PART 2: DOUBLE-COLUMN MACHINES (SLIDE-HEAD TYPE AND CROSS-SLIDE TABLE TYPE)
14/30304022 DC : 0 BS ISO 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES
BS EN 60122-3:2010 Quartz crystal units of assessed quality Standard outlines and lead connections
BS ISO 7200:1984 Technical drawing. Title blocks
09/30118717 DC : DRAFT OCT 2009 BS ISO 230-1 - TEST CODE FOR MACHINE TOOLS - PART 1: GEOMETRIC ACCURACY OF MACHINES OPERATING UNDER NO-LOAD OR QUASI-STATIC CONDITIONS
13/30277307 DC : 0 BS ISO 17447-1 - ROAD VEHICLES - GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 1: BASIC CHARACTERISTICS AND DIMENSIONS FOR METAL-SHEATH-TYPE GLOW-PLUGS
BS 4500-1.1(1990) : AMD 7630 ISO LIMITS AND FITS - GENERAL, TOLERANCES AND DEVIATIONS - SPECIFICATION FOR BASES OF TOLERANCES, DEVIATIONS AND FITS
DIN EN ISO 1797 E : 2017 DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017)
DIN ISO 6412-1:1991-05 TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION OF PIPELINES - GENERAL RULES AND ORTHOGONAL REPRESENTATION
98/706002 DC : DRAFT APR 1998 ISO/CD 3601-5 - FLUID SYSTEMS - SEALING DEVICES - O-RINGS - PART 5: ANTI-EXTRUSIONS DEVICES (BACK-UP RINGS)
BS EN 62772:2016 Composite hollow core station post insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V. Definitions, test methods and acceptance criteria
BS ISO 3070-3:1997 Test conditions for boring and milling machines with horizontal spindle. Testing of the accuracy Floor type machines with detached, stationary work-holding table
BS EN 6072:2010 Aerospace series. Metallic materials. Test methods. Constant amplitude fatigue testing
UNE-ISO 230-1:2014 Machine-tools. Test code for machine tools -- Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
DIN 7167:1987-01 RELATIONSHIP BETWEEN DIMENSIONAL TOLERANCES AND FORM AND PARALLELISM TOLERANCES - ENVELOPE PRINCIPLE WITHOUT DRAWING INDICATION
03/103749 DC : DRAFT FEB 2003 BS ISO 12488-1 - CRANES - TOLERANCES FOR WHEELS AND TRAVEL AND TRAVERSING TRACKS - PART 1: GENERAL
BS ISO 10110-19:2015 Optics and photonics. Preparation of drawings for optical elements and systems General description of surfaces and components
07/30172453 DC : 0 BS ISO 13041-6 - MACHINE TOOLS - TEST CONDITIONS FOR NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES - PART 6: ACCURACY OF A FINISHED TEST PIECE
12/30261889 DC : 0 BS EN 12420 - COPPER AND COPPER ALLOYS - FORGINGS
I.S. EN 14766:2006 MOUNTAIN-BICYCLES - SAFETY REQUIREMENTS AND TEST METHODS
ISO 6624-4:2016 Internal combustion engines Piston rings Part 4: Half keystone rings made of steel
BS 5341-7.4:1992 Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for single piece rings. Specification for oil control rings
96/702223 DC : 0 PREN 4226 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY, UNIONS; ELBOWS 90 DEGREES WITH FLEXIBLE TUBE FITTING END
DD CEN ISO/TS 17450-1 : DRAFT 2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION
BS QC 880000-1(1995) : 1995 AMD 9689 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - FIBRE OPTIC FAN-OUTS - GENERIC SPECIFICATION
14/30289493 DC : 0 BS EN 62148-18 - FIBER OPTIC ACTIVE COMPONENTS AND DEVICES: PACKAGE AND INTERFACE STANDARDS - PART 18: 40-GBIT/S SERIAL TRANSMITTER AND RECEIVER COMPONENTS FOR USE WITH THE LC CONNECTOR INTERFACE
BS EN ISO 10579:2013 Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts
BS 1192-1:1984 Construction drawing practice Recommendations for general principles
BS ISO 6622-2:2013 Internal combustion engines. Piston rings Rectangular rings made of steel
14/30280974 DC : 0 BS EN ISO 4759-3 - TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F
SANS 9272 : 1ED 2003 RUBBER AND RUBBER PRODUCTS - DETERMINATION OF PRECISION FOR TEST METHOD STANDARDS
ISO 6550-3:2013 Road vehicles Sheath-type glow-plugs with conical seating and their cylinder head housing Part 3: M10 glow-plugs
I.S. EN 62148-15:2014 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 15: DISCRETE VERTICAL CAVITY SURFACE EMITTING LASER PACKAGES
BS ISO 10766:2014 Hydraulic fluid power. Cylinders. Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
07/30166156 DC : 0 BS ISO 12164-3 - HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 3: DIMENSIONS OF SHANKS FOR STATIONARY TOOLS
13/30213519 DC : 0 BS EN ISO 25178-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 1: INDICATION OF SURFACE TEXTURE
UNI ISO 3089 : 2009 MACHINE TOOLS - TEST CONDITIONS FOR SELF-CENTERING, MANUALLY-OPERATED CHUCKS WITH ONE-PIECE JAWS
BS ISO 3070-1:2007 Machine tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Machines with fixed column and movable table
13/30272252 DC : 0 BS ISO 10110-6 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 6: CENTRING TOLERANCES
BS ISO 6622-1:2003 Internal combustion engines. Piston rings Rectangular rings made of cast iron
ISO 1920-2:2016 Testing of concrete Part 2: Properties of fresh concrete
UNI EN 15904 : 2011 GLASS PACKAGING - STANDARD TOLERANCES FOR FLACONNAGE
UNI EN ISO 2538-2 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING
10/30218225 DC : 0 BS EN 60874-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
BS ISO 128-22:1999 Technical drawings. General principles of presentation Basic conventions and applications for leader lines and reference lines
07/30164411 DC : 0 EN 61314-1 - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
04/30077768 DC : DRAFT FEB 2004 ISO 4401 - HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES
16/30338746 DC : DRAFT APR 2016 BS ISO 15872 - AEROSPACE - UNJ THREADS - GAUGING
BS ISO 28704:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for cyclic bending fatigue of porous ceramics at room temperature
BS ISO 8788:2000 Aerospace. Nuts, metric. Tolerances of form and position
BS ISO 22514-6:2013 Statistical methods in process management. Capability and performance Process capability statistics for characteristics following a multivariate normal distribution
04/30098930 DC : DRAFT FEB 2004 ISO 6550-4 - ROAD VEHICLES - SHEATH-TYPE GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 4: M8 X 1 GLOW PLUGS (N983)
BS EN 61076-7-001:2004 Connectors for electronic equipment Cable outlet accessories - Blank detail specification
BS EN 62496-1:2009 Optical circuit boards General
BS ISO 11418-3 : 2016 CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 3: SCREW-NECK GLASS BOTTLES (VERAL) FOR SOLID AND LIQUID DOSAGE FORMS
SANS 5725-5 : 1ED 2009 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD
BS ISO 11418-4:2005 Containers and accessories for pharmaceutical preparations Tablet glass bottles
BS ISO 12164-4:2014 Hollow taper interface with flange contact surface Dimensions of receivers for stationary tools
14/30297431 DC : 0 BS EN 60875-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
DIN EN ISO 8062-3:2008-09 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
UNI EN ISO 8098 : 2014 CYCLES - SAFETY REQUIREMENTS FOR BICYCLES FOR YOUNG CHILDREN
CEI EN 62099 : 2002 FIBRE OPTIC WAVELENGTH SWITCHES - GENERIC SPECIFICATION
BS ISO 7790:2013 Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10. Clamping dimensions
UNI EN ISO 12780-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS
UNI ISO 22514-6 : 2014 STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 6: PROCESS CAPABILITY STATISTICS FOR CHARACTERISTICS FOLLOWING A MULTIVARIATE NORMAL DISTRIBUTION
03/115229 DC : DRAFT SEP 2003 BS EN 14766 - MOUNTAIN-BICYCLES - SAFETY REQUIREMENTS AND TEST METHODS
DIN ISO 15242-2:2014-06 ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 2: RADIAL BALL BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE (ISO 15242-2:2004 + COR. 1:2010)
EN 61202-1:2017 Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification
ISO 3069:2000 End-suction centrifugal pumps — Dimensions of cavities for mechanical seals and for soft packing
08/30191273 DC : DRAFT OCT 2008 BS EN 61977 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FILTERS - GENERIC SPECIFICATION
BS ISO 12164-2:2001 Hollow taper interface with flange contact surface Receivers. Dimensions
BS ISO 6263:2013 Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces
91/73529 DC : DRAFT MAY 1991 ISO/DIS 10578 - TECHNICAL DRAWINGS - TOLERANCING OF ORIENTATION AND OF LOCATION - PROJECTED TOLERANCE ZONE CONCEPT
13/30286032 DC : 0 BS ISO 22514-1 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 1: GENERAL PRINCIPLES AND CONCEPTS
15/30279088 DC : 0 BS ISO 18535 - DIAMOND-LIKE CARBON FILMS - DETERMINATION OF FRICTION AND WEAR CHARACTERISTICS OF DIAMOND-LIKE CARBON FILMS BY BALL-ON-DISC METHOD
BS EN 14879-6:2009 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Combined linings with tile and brick layers
BS ISO 8098:2002 Cycles. Safety requirements for bicycles for young children
DIN 41494-5 : 1986 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT; MECHANICAL STRUCTURES OF THE 482,6 MM (19") SERIES; DIMENSIONS OF SUBRACKS AND PLUG-IN UNITS
16/30336111 DC : 0 BS EN 60715 ED 2.0 - DIMENSIONS OF LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - STANDARDIZED MOUNTING ON RAILS FOR MECHANICAL SUPPORT OF SWITCHGEAR, CONTROLGEAR AND ACCESSORIES
15/30320002 DC : 0 BS ISO 6624-1 - INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 1: KEYSTONE RINGS MADE OF CAST IRON
BS EN 60086-2:2016 Primary batteries Physical and electrical specifications
04/30126747 DC : DRAFT DEC 2004 IEC 60874-1 ED.5 - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
BS ISO 13041-6:2009 Test conditions for numerically controlled turning machines and turning centres Accuracy of a finished test piece
DIN EN ISO 1179-2:2014-03 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
12/30267860 DC : 0 BS EN 16482 - FOUNDING - CONTINUOUS CAST IRON BARS
ISO 13050:2014 Synchronous belt drives Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys
06/30128792 DC : DRAFT JUN 2006 ISO 7789 - HYDRAULIC FLUID POWER - TWO, THREE AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES
07/30166159 DC : 0 BS ISO 12164-4 - HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 4: DIMENSIONS OF RECEIVERS FOR STATIONARY TOOLS
96/702221 DC : 0 PREN 4224 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; UNIONS FOR FLEXIBLE TUBES
UNE-EN ISO 17450-3:2017 Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
11/30247545 DC : 0 BS EN 16313 - CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G [3/4] A AND INSIDE CONE
12/30242874 DC : 0 BS ISO 1206:2001/AMD 1 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DIMENSION SERIES 48, 49 AND 69 - BOUNDARY DIMENSIONS AND TOLERANCES
BS ISO 26303:2012 Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools
BS ISO/ASTM 52901 : 2017 ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - REQUIREMENTS FOR PURCHASED AM PARTS
UNE-EN 12101-7:2013 Smoke and heat control systems - Part 7: Smoke duct sections
ISO 5294:2012 Synchronous belt drives Pulleys
I.S. EN 61076-7-001:2004 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-001: CABLE OUTLET ACCESSORIES - BLANK DETAIL SPECIFICATION
ISO 6624-3:2017 Internal combustion engines — Piston rings — Part 3: Keystone rings made of steel
UNE-ISO 13041-6:2011 Test conditions for numerically controlled turning machines and turning centres -- Part 6: Accuracy of a finished test piece
I.S. EN 60874-1:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION (IEC 60874-1:2011 (EQV))
BS 6955-0:1988 Calibration of vibration and shock pick-ups Guide to basic principles
BS ISO 10303-47:1997 Industrial automation systems and integration. Product data representation and exchange Integrated generic resource. Shape variation tolerances
BS EN ISO 1179-2:2013 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
BS ISO 6624-3:2017 Internal combustion engines. Piston rings Keystone rings made of steel
09/30192800 DC : 0 BS ISO 29262 - PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN GRIPPERS AND HANDLING SYSTEM
BS EN 60869-1:2013 Fibre optic interconnecting devices and passive components. Fibre optic passive power control devices Generic specification
09/30199057 DC : 0 BS ISO 11926-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 UN AND UNF THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
BS ISO 17447-2:2015 Road Vehicles. Glow-plugs with conical seating and their cylinder head housing Basic characteristics and dimensions for ceramic-sheath-type glow-plugs
BS ISO 14275:2002 Aerospace. Drives, internal, offset cruciform, ribbed. Metric series
BS QC 030000:1993 Harmonized system of quality assessment for electronic components. Rectangular connectors for frequencies below 3 MHz. Generic specification. General requirements and guide for the preparation of detail specifications for connectors with assessed quality
BS ISO 6155:1998 Machine tools. Test conditions for horizontal spindle turret and single spindle automatic lathes. Testing of the accuracy
DD CEN ISO/TS 12780-1:2007 Geometrical product specifications (GPS). Straightness Vocabulary and parameters of straightness
BS EN ISO 17296-3:2016 Additive manufacturing. General principles Main characteristics and corresponding test methods
ISO 14278:2002 Aerospace Gauges, for internal offset cruciform ribbed or unribbed drives Metric series
11/30247969 DC : 0 ISO/DIS 22514-6.2 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 6: PROCESS CAPABILITY STATISTICS FOR CHARACTERISTICS FOLLOWING A MULTIVARIATE NORMAL DISTRIBUTION
96/702209 DC : 0 PREN 4140 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREE; IN ANODIZED ALUMINIUM ALLOYS; STRAIGHT UNIONS
BS ISO 3442-2:2005 Machine tools. Dimensions and geometric tests for self-centring chucks with two-piece jaws Power-operated chucks with tongue and groove type jaws
11/30211189 DC : 0 BS ISO 6622-2 - INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 2: RECTANGULAR RINGS MADE OF STEEL
BS EN 50243:2002 Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers
16/30322061 DC : DRAFT MAR 2016 BS EN 13001-3-4 - CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS
UNE-EN ISO 17450-1:2015 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
BS ISO 3089:2005 Machine tools. Test conditions for self-centring, manually-operated chucks with one-piece jaws
CSA Z5360:2008 ANAESTHETIC VAPORIZERS - AGENT-SPECIFIC FILLING SYSTEMS
09/30198176 DC : 0 BS EN ISO 17450-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION
07/30173210 DC : 0 BS EN 62148-16 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 16: TRANSMITTER AND RECEIVER COMPONENTS FOR LC CONNECTOR INTERFACE
BS EN 62150-2:2011 Fibre optic active components and devices. Test and measurement procedures ATM-PON transceivers
ISO/TS 15530-4:2008 Geometrical Product Specifications (GPS) Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Part 4: Evaluating task-specific measurement uncertainty using simulation
BS EN 62148-6:2003 Fibre optic active components and devices. Package and interface standards ATM-PON transceivers
TR 4609 : 2015 AEROSPACE SERIES - SPIRAL DRIVE RECESSES FOR THREADED FASTENERS - GEOMETRICAL DEFINITION AND TECHNICAL REQUIREMENTS
BS ISO 15786:2008 Technical drawings. Simplified representation and dimensioning of holes
UNI EN ISO 286-1 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS
BS EN 62148-5:2003 Fibre optic active components and devices. Package and interface standards SC 1x9 fibre optic modules
UNI EN ISO 1179-4 : 2008 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
BS EN 61073-1:2009 Fibre optic interconnecting devices and Passive components. Mechanical splices and fusion splice protectors for optical fibres and cables Generic specification
BS IEC 61747-1 : 1998 AMD 10788 LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - GENERIC SPECIFICATION
12/30264410 DC : 0 BS ISO 199 - ROLLING BEARINGS - THRUST BEARINGS - TOLERANCES
ISO 15407-2:2003 Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 2: Mounting interface surfaces with optional electrical connector
01/705811 DC : 0 BS 5892-7 - RAILWAY ROLLING STOCK MATERIALS - PART 7: SPECIFICATION FOR CAST WHEELS FOR TRACTION AND TRAILING STOCK
09/30206090 DC : 0 BS EN 62496-4 - OPTICAL CIRCUIT BOARDS - INTERFACE STANDARDS - PART 4: GENERAL AND GUIDANCE
96/702213 DC : 0 PREN 4144 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; UNIONS, 4-WAY
BS EN 61269-1:1997 Fibre optic terminus sets Generic specification
BS ISO 12164-3:2014 Hollow taper interface with flange contact surface Dimensions of shanks for stationary tools
BS ISO 5459:1981 Technical drawings. Geometrical tolerancing. Datums and datum-systems for geometrical tolerances
BS 3934-3:1992 Mechanical standardization of semiconductor devices Recommendations for the preparation of outline drawings of integrated circuits
CEN ISO/TS 17450-1:2007/AC:2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION (ISO/TS 17450-1:2005/COR 1:2007)
DIN ISO 8775:1988-06 AEROSPACE - GASEOUS OXYGEN REPLENISHMENT CONNECTION FOR USE IN FLUID SYSTEMS (NEW TYPE) - DIMENSIONS (INCH SERIES)
PREN 4852 : DRAFT 2017 AEROSPACE SERIES - EXTERNAL SPIRAL DRIVE HEADS FOR THREADED FASTENERS - GEOMETRICAL DEFINITION AND WRENCHING CONFIGURATION
PREN 4408-1 : 200P1 AEROSPACE SERIES - TECHNICAL DRAWINGS - REPRESENTATION OF PARTS MADE OF COMPOSITE MATERIALS - PART 1: GENERAL RULES
DIN EN ISO 1660 E : 2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017)
ISO 14279:2002 Aerospace Drives, internal, cruciform Metric series
I.S. EN ISO 5459:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS
BS ISO 7368:2016 Hydraulic fluid power. Two-port slip-in cartridge valves. Cavities
CEI EN 61076-1 : 2007 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
BS ISO 1206 : 2001 ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DIMENSION SERIES 48, 49 AND 69 -BOUNDARY DIMENSIONS AND TOLERANCES
I.S. EN 60869-1:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE POWER CONTROL DEVICES - PART 1: GENERIC SPECIFICATION (IEC 60869-1:2012 (EQV))
DIN ISO 12164-3 E : 2016 HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 3: DIMENSIONS OF SHANKS FOR STATIONARY TOOLS (ISO 12164-3:2014)
I.S. EN 1071-13:2010 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 13: DETERMINATION OF WEAR RATE BY THE PIN-ON-DISK METHOD
I.S. EN 62149-5:2011 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS
NF EN 62077 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
CEI EN 62150-2 : 2012 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 2: ATM-PON TRANSCEIVERS
ISO 13715:2017 Technical product documentation Edges of undefined shape Indication and dimensioning
UNI ISO 3070-3 : 2009 MACHINE TOOLS - TEST CONDITIONS FOR TESTING THE ACCURACY OF BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE - PART 3: MACHINES WITH MOVABLE COLUMN AND MOVABLE TABLE
ISO 10110-19:2015 Optics and photonics Preparation of drawings for optical elements and systems Part 19: General description of surfaces and components
ISO 679:2009 Cement Test methods Determination of strength
UNE-EN ISO 8015:2012 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
I.S. EN 60715:2017 DIMENSIONS OF LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - STANDARDIZED MOUNTING ON RAILS FOR MECHANICAL SUPPORT OF SWITCHGEAR, CONTROLGEAR AND ACCESSORIES
I.S. EN 61978-1:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION
IEC 62148-16:2009 Fibre optic active components and devices - Package and interface standards - Part 16: Transmitter and receiver components for use with LC connector interface
I.S. EN ISO 14978:2006 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
ISO 17447-2:2015 Road Vehicles Glow-plugs with conical seating and their cylinder head housing Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs
EN ISO 6412-1:2018 Technical product documentation - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO 6412-1:2017)
ISO 286-1:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits
PREN 12420 : DRAFT 2012 COPPER AND COPPER ALLOYS - FORGINGS
BS EN 50342-2 : 2007 LEAD-ACID STARTER BATTERIES - PART 2: DIMENSIONS OF BATTERIES AND MARKING OF TERMINALS
ISO 14405-2:2011 Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes
UNI EN ISO 1179-3 : 2008 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
UNI EN ISO 5459 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS
UNI EN ISO 10579 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS
NF EN 62134-1 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
I.S. EN ISO 12781-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS
EN ISO 6149-1:2007 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2007)
ISO/TR 6624-2:1988 Internal combustion engines — Piston rings — Part 2: Half keystone rings
DIN EN ISO 8362-1:2016-06 INJECTION CONTAINERS AND ACCESSORIES - PART 1: INJECTION VIALS MADE OF GLASS TUBING (ISO 8362-1:2009 + AMD 1:2015)
ISO/TS 17863:2013 Geometrical product specification (GPS) Tolerancing of moveable assemblies
ISO 15407-1:2000 Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 1: Mounting interface surfaces without electrical connector
ISO 5597:2010 Hydraulic fluid power Cylinders Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
PREN 13001-3-4 : DRAFT 2016 CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS
I.S. EN 60862-3:2003 SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 3: STANDARD OUTLINES
ISO/TR 5460:1985 Technical drawings Geometrical tolerancing Tolerancing of form, orientation, location and run-out Verification principles and methods Guidelines
ISO 10303-219:2007 Industrial automation systems and integration — Product data representation and exchange — Part 219: Application protocol: Dimensional inspection information exchange
ISO 8788:2000 Aerospace Nuts, metric Tolerances of form and position
EN ISO 1797 : 2017 DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017)
ISO/TS 17450-1:2005 Geometrical product specifications (GPS) General concepts Part 1: Model for geometrical specification and verification
ISO 7368:2016 Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities
ISO 10766:2014 Hydraulic fluid power Cylinders Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
ISO 15786:2008 Technical drawings — Simplified representation and dimensioning of holes
ISO 5458:1998 Geometrical Product Specifications (GPS) Geometrical tolerancing Positional tolerancing
ISO 9270-1:2010 7/24 taper spindle noses for automatic tool changers Part 1: Dimensions and designation of spindle noses of forms S and SF
ISO 6621-2:2003 Internal combustion engines Piston rings Part 2: Inspection measuring principles
ISO 20808:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
ISO 10303-214:2010 Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes
IEC 60320-2-2:1998 Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment
I.S. EN 62149-6:2003 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 6: 650-NM 250-MBIT/S PLASTIC OPTICAL FIBRE TRANSCEIVERS
S.R. CEN ISO TS 12780-1:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS
ISO 18669-2:2004 Internal combustion engines Piston pins Part 2: Inspection measuring principles
IEC 61202-1:2016 Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification
IEC 60715:2017 Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories
ISO 11418-2:2016 Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups
ISO 3442-2:2005 Machine tools Dimensions and geometric tests for self-centring chucks with two-piece jaws Part 2: Power-operated chucks with tongue and groove type jaws
ISO 11090-1:2014 Test conditions for die sinking electro-discharge machines (die sinking EDM) Testing of the accuracy Part 1: Single-column machines (cross-slide table type and fixed-table type)
ISO 5781:2016 Hydraulic fluid power Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves Mounting surfaces
IEC 62679-1-1:2014 Electronic paper displays - Part 1-1: Terminology
EN 12420:2014 Copper and copper alloys - Forgings
IEC 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
I.S. CWA 14249:2003 REVISED FUNSTEP APPLICATION REFERENCE MODEL
ISO 7913:1994 Aerospace Bolts and screws, metric Tolerances of form and position
ISO 3070-3:2007 Machine tools Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Part 3: Machines with movable column and movable table
S.R. CEN ISO TS 12781-1:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS
IEC 62148-1:2017 Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance
IEC 60095-2:2009 Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals
DIN EN ISO 9013 E : 2003 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
DIN EN 1426:2015-09 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
EN 60715:2017 Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories
DIN EN 12420:2014-09 COPPER AND COPPER ALLOYS - FORGINGS
DIN EN ISO 14978:2006-09 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
DIN EN ISO 9013:2003-07 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
UNE-EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
BS EN 22768-2:1993 General tolerances Geometrical tolerances for features without individual tolerance indications
UNE-EN ISO 8362-4:2012 Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011)
BS EN ISO 9974-3:2000 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with metal-to-metal sealing (type B)
ISO 10135:2007 Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD)
ISO 9187-1:2010 Injection equipment for medical use Part 1: Ampoules for injectables
IEC 61754-1:2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance
BS EN 12020-2:2016 Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Tolerances on dimensions and form
UNE-EN 1426:2015 Bitumen and bituminous binders - Determination of needle penetration
ISO 464:2015 Rolling bearings Radial bearings with locating snap ring Dimensions, geometrical product specifications (GPS) and tolerance values
BS EN ISO 14660-2:2000 Geometrical product specifications (GPS). Geometrical features Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
UNE-ISO 26303:2013 Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools
ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
ISO 128-24:2014 Technical drawings General principles of presentation Part 24: Lines on mechanical engineering drawings
IEC 61978-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification
ISO 10360-6:2001 Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6: Estimation of errors in computing Gaussian associated features
IEC 61977:2015 Fibre optic interconnecting devices and passive components - Fibre optic filters - Generic specification
ISO 14405-1:2016 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
EN 61977:2015 Fibre optic interconnecting devices and passive components - Fibre optic filters - Generic specification
EN 62149-5:2011 Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs
UNI EN 13262 : 2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
EN ISO 14978:2006/AC:2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
I.S. EN 13262:2004 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
UL 60320-1:2ED 2011-05 Appliances Couplers for Household and Similar General Purposes - Part 1: General Requirements
EN 13262:2004+A2:2011 Railway applications - Wheelsets and bogies - Wheels - Product requirements
EN ISO 7711-2:2011 Dentistry - Rotary diamond instruments - Part 2: Discs (ISO 7711-2:2011)
EN ISO 4759-1 : 2000 TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C
EN ISO 9409-2:2003 Manipulating industrial robots - Mechanical interfaces - Part 2: Shafts (ISO 9409-2:2002)
EN ISO 9409-1:2004 Manipulating industrial robots - Mechanical interfaces - Part 1: Plates (ISO 9409-1:2004)
EN ISO 6149-3:2007 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)
UNI EN ISO 9187-1 : 2010 INJECTION EQUIPMENT FOR MEDICAL USE - PART 1: AMPOULES FOR INJECTABLES
UNI EN ISO 8536-1 : 2011 INFUSION EQUIPMENT FOR MEDICAL USE - PART 1: INFUSION GLASS BOTTLES
UNI EN 14766 : 2006 MOUNTAIN-BICYCLES - SAFETY REQUIREMENTS AND TEST METHODS
UNI EN ISO 10360-6 : 2005 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES
UNI EN 12420 : 2014 COPPER AND COPPER ALLOYS - FORGINGS
EN 61754-34:2016 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 34: Type URM connector family
UNI EN 20286-1 : 1995 ISO SYSTEM OF LIMITS AND FITS - BASES OF TOLERANCES, DEVIATIONS AND FITS
UNI EN 14765 : 2008 BICYCLES FOR YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS
UNI EN ISO 7711-2 : 2011 DENTISTRY - ROTARY DIAMOND INSTRUMENTS - PART 2: DISCS
UNI EN 16313 : 2013 CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G 3/4 A AND INSIDE CONE
ENV 14443:2004
UNI EN 1071-13 : 2010 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 13: DETERMINATION OF WEAR RATE BY THE PIN- ON-DISK METHOD
UNI EN 14879-6 : 2010 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
UNI EN ISO 8362-4 : 2011 INJECTION CONTAINERS AND ACCESSORIES - PART 4: INJECTION VIALS MADE OF MOULDED GLASS
ISO 6263:2013 Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces
UNI CEN/TS 15718 : 2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS
BS 6494-5:1989 Hydraulic fluid power valve mounting surfaces Specification for compensated flow-control valves
I.S. EN 50342-2:2007 LEAD-ACID STARTER BATTERIES - PART 2: DIMENSIONS OF BATTERIES AND MARKING OF TERMINALS
UNI ISO 13041-6 : 2010 Test conditions for numerically controlled turning machines and turning centres - Part 6: Accuracy of a finished test piece
DIN ISO 29262 E : 2013 PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN END EFFECTOR AND HANDLING SYSTEM (ISO 29262:2011)
BS 308-2.3(1996) : 1996 TECHNICAL DRAWINGS - DIMENSIONING AND TOLERANCING OF PROFILES
ISO 3089:2005 Machine tools Test conditions for self-centring, manually operated chucks with one-piece jaws
96/702212 DC : 0 PREN 4143 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; CAP ASSEMBLY, FILTER
16/30341970 DC : 0 BS ISO 1206 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH MACHINED RINGS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
12/30242900 DC : 0 BS ISO 6624-4 - INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 4: HALF KEYSTONE RINGS MADE OF STEEL
DIN EN ISO 12818:2015-08 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)
99/702254 DC : DRAFT JAN 1999 ISO/DIS 7465 - PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFTS AND COUNTERWEIGHTS - T-TYPE
17/30340059 DC : 0 BS EN 61076-3-119 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR UNSHIELDED, FREE AND FIXED 10 WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS WITH FREQUENCIES UP TO 100 MHZ
BS ISO 17296-3 : 2014 ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS
14/30261577 DC : 0 BS EN ISO 9013 - THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES
BS ISO 12256:2002 Aerospace. Drives, internal, cruciform, ribbed. Metric series
BS EN ISO 286-1:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits
BS ISO 3019-1:2001 Hydraulic fluid power. Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors Inch series shown in metric units
17/30361915 DC : DRAFT JUL 2017 BS EN 62149-11 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 11: MULTIPLE CHANNEL TRANSMITTER/RECEIVER CHIP SCALE PACKAGE WITH MULTIMODE FIBRE INTERFACE
DIN SPEC 91184 E : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
13/30284676 DC : 0 BS EN ISO 1660 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING
BS ISO 5597:2010 Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
UNI ISO/TS 15530-4 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 4: EVALUATING TASK-SPECIFIC MEASUREMENT UNCERTAINTY USING SIMULATION
17/30344899 DC : 0 BS ISO 17123-5 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 5: TOTAL STATIONS
DIN ISO 286-2:1990-11 ISO SYSTEM OF LIMITS AND FITS - TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
BS EN ISO 12818:2015 Glass packaging. Standard tolerances for flaconnage
09/30198258 DC : 0 BS EN 60679-3 ED.3 - QUARTZ CRYSTAL CONTROLLED OSCILLATORS OF ASSESSED QUALITY - PART 3: STANDARD OUTLINES AND LEAD CONNECTIONS
DIN EN 16054:2012-11 BMX bicycles - Safety requirements and test methods
BIS IS 800 : 2007 AMD 1 2012 GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE
DIN ISO 10230 E : 2016 CYCLES - SPLINED HUB AND SPROCKET - MATING DIMENSIONS (ISO 10230:1990)
BS ISO 18535:2016 Diamond-like carbon films. Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
BS ISO 3069:2000 End-suction centrifugal pumps. Dimensions of cavities for mechanical seals and for soft packing
ISO 6155:1998 Machine tools Test conditions for horizontal spindle turret and single spindle automatic lathes Testing of the accuracy
12/30255486 DC : 0 BS ISO 11090-1 - TEST CONDITIONS FOR DIE SINKING ELECTRO-DISCHARGE MACHINES (EDM) - TERMINOLOGY AND TESTING OF ACCURACY - PART 1: SINGLE COLUMN MACHINES (CROSS-SLIDE TABLE TYPE AND FIXED-TABLE TYPE)
UNI CEN ISO/TS 8062-2 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES
14/30257552 DC : 0 BS ISO 3245 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DRAWN CUP WITHOUT INNER RING - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS), BOUNDARY DIMENSIONS AND TOLERANCES
BS ISO 21927-7:2017 Smoke and heat control systems Smoke ducts sections
04/30112396 DC : 0 ISO 3070-3 - TEST CONDITIONS FOR BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE - TESTING OF ACCURACY - PART 3: PLANER-TYPE MACHINES WITH MOVABLE COLUMN
BIS IS/IEC 60320-1 : 2001 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
BS ISO 6149-1:1993 Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Ports with O-ring in truncated housing
I.S. EN 61837-2:2011 SURFACE MOUNTED PIEZOELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTION - STANDARD OUTLINES AND TERMINAL LEAD CONNECTIONS - PART 2: CERAMIC ENCLOSURES
09/30200401 DC : 0 BS EN 61240 ED.2 - PIEZOELECTRIC DEVICES - PREPARATION OF OUTLINE DRAWINGS OF SURFACE MOUNTED DEVICES (SMD) FOR FREQUENCY CONTROL AND SELECTION - GENERAL RULES
BS EN ISO 8015:2011 Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules
DD IEC PAS 62074-1 : DRAFT NOV 2007 FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
96/702216 DC : 0 PREN 4147 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; UNIONS, ELBOW 90 DEGREES
05/30107533 DC : DRAFT JUL 2005 ISO 10303-224 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 224: APPLICATION PROTOCOL - MECHANICAL PRODUCT DEFINITION FOR PROCESS PLANNING USING MACHINING FEATURES
13/30277884 DC : 0 BS EN 62148-15 ED 2.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 15: DISCRETE VERTICAL CAVITY SURFACE EMITTING LASER PACKAGES
12/30230676 DC : 0 BS EN ISO 16792 - TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
BS EN 61754-34:2016 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type URM connector family
UNE-EN ISO 12781-1:2012 Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
BS EN 4408-1:2005 Aerospace series. Technical drawings. Representation of parts made of composite materials General rules
BS EN 60679-3:2013 Quartz crystal controlled oscillators of assessed quality Standard outlines and lead connections
I.S. EN ISO 286-1:2010/AC:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010)
UNE-EN ISO 25178-1:2016 Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
BS ISO 18669-2:2004 Internal combustion engines. Pistons pins Inspection measuring principles
02/206233 DC : DRAFT JUN 2002 IEC 62148-12. ED.1.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 12: LASER TRANSMITTER WITH A COAXIAL RF CONNECTOR
12/30245241 DC : 0 BS EN ISO 8098 - CYCLES - SAFETY REQUIREMENTS FOR BICYCLES FOR YOUNG CHILDREN
07/30162143 DC : 0 BS EN 62148-15 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 15: DISCRETE VERTICAL CAVITY SURFACE EMITTING LASER PACKAGES
I.S. EN 62148-5:2003 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 5: SC 1X9 FIBRE OPTIC MODULES
BS ISO 1803:1997 Building construction. Tolerances. Expression of dimensional accuracy. Principles and terminology
BS EN ISO 14638:2015 Geometrical product specifications (GPS). Matrix model
18/30376687 DC : DRAFT APR 2018 BS EN 62149-11 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 11: MULTIPLE CHANNEL TRANSMITTER/RECEIVER CHIP SCALE PACKAGE WITH MULTIMODE FIBRE INTERFACE
CEI EN 61274-1 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION
ISO 29262:2011 Production equipment for microsystems Interface between end effector and handling system
07/30162389 DC : 0 BS EN 62496-1 - OPTICAL CIRCUIT BOARDS - PART 1: GENERAL STANDARD
BS ISO 3030:2011 Rolling bearings. Radial needle roller and cage assemblies. Boundary dimensions and tolerances
BS ISO 6550-3:2013 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing M10 glow-plugs
UNI EN ISO 286-2 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
DIN ISO 10110-6:2016-06 OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 6: CENTRING TOLERANCES (ISO 10110-6:2015)
BS EN 62148-1:2002 Fibre optic active components and devices. Package and interface standards General and guidance
12/30259951 DC : 0 BS EN 62074-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
08/30169101 DC : 0 BS EN 61978-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION
PD ISO/TR 17209:2013 Hydraulic fluid power. Two-, three-and four-port screw-in cartridge valves. Cavities with ISO 725 (UN and UNF) threads
BS 308-3.6(1995) : 1995 TECHNICAL DRAWINGS - SYMBOLS FOR GEOMETRICAL TOLERANCING - PROPORTIONS AND DIMENSIONS
14/30272886 DC : 0 BS ISO 17841 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR THERMAL FATIGUE OF FINE CERAMICS SUBSTRATE
17/30337243 DC : DRAFT SEP 2017 BS ISO 21113 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMIC THIN PLATES AT ROOM TEMPERATURE
CEI EN 61202-1 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
DIN EN 1071-12:2010-07 Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test
17/30364670 DC : 0 BS EN 60086-2 ED.14.0 - PRIMARY BATTERIES - PART 2: PHYSICAL AND ELECTRICAL SPECIFICATIONS
DIN ISO 3019-2:2004-02 Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series (ISO 3019-2:2001)
DIN EN ISO 10579 E : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011)
I.S. EN 62772:2016 COMPOSITE HOLLOW CORE STATION POST INSULATORS FOR SUBSTATIONS WITH A.C. VOLTAGE GREATER THAN 1000 V AND D.C. VOLTAGE GREATER THAN 1500 V - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
I.S. EN 62148-17:2014 FIBER OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 17: TRANSMITTER AND RECEIVER COMPONENTS WITH DUAL COAXIAL RF CONNECTORS
DIN EN 16313:2013-08 Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G 3/4 A and inside cone
BS EN 180000:1996 Harmonized system of quality assessment for electronic components. Generic specification: Fibre optic attenuators
04/30125936 DC : DRAFT NOV 2004 ISO 10135 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - DRAWING INDICATIONS FOR MOULDED PARTS
EN IEC 61076-3-119:2018 Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz
BS ISO 13050:2014 Synchronous belt drives. Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys
BS 6828-9:1987 Dental rotary instruments Methods of test
14/30287632 DC : 0 BS EN ISO 12836:2012/AMD 1 - DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY
BS ISO 230-1:2012 Test code for machine tools Geometric accuracy of machines operating under no-load or quasi-static conditions
BS EN 60320-3:2014 Appliance couplers for household and similar general purposes Standard sheets and gauges
DIN ISO 15786 E : 2014 TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION AND DIMENSIONING OF HOLES (ISO 15786:2008)
09/30199223 DC : DRAFT JAN 2009 BS EN 60876-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
BS ISO 20808:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
BS ISO 6264:1998 Hydraulic fluid power. Pressure-relief valves. Mounting surfaces
BS EN 62496-4:2011 Optical circuit boards Interface standards. General and guidance
15/30284673 DC : 0 BS EN ISO 17450-4 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING FORM, ORIENTATION LOCATION AND RUN-OUT DEVIATION
15/30320005 DC : 0 BS ISO 6624-3 - INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 3: KEYSTONE RINGS MADE OF STEEL
NF EN ISO 5459 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM-SYSTEMS
16/30342543 DC : 0 BS EN 8.3588 - AEROSPACE SERIES - EXTERNAL SPIRAL DRIVE HEADS FOR THREADED FASTENERS - GEOMETRICAL DEFINITION AND WRENCHING CONFIGURATION
BS ISO 6162-1:2012 Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
08/30163094 DC : DRAFT FEB 2008 BS EN ISO 286-2 AMD1 - ISO SYSTEM OF LIMITS AND FITS - PART 2: TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
UNI ISO 3442-1 : 2009 MACHINE TOOLS - DIMENSIONS AND GEOMETRIC TESTS FOR SELF-CENTRING CHUCKS WITH TWO-PIECE JAWS - PART 1: MANUALLY OPERATED CHUCKS WITH TONGUE AND GROOVE TYPE JAWS
BS ISO 492:2014 Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values
08/30152628 DC : DRAFT SEP 2008 BS ISO 6550-4 - ROAD VEHICLES - SHEATH-TYPE GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 4: M8 X 1 GLOW-PLUGS
08/30191292 DC : DRAFT OCT 2008 BS EN 62077 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
BS EN 62148-15:2014 Fibre optic active components and devices. Package and interface standards Discrete vertical cavity surface emitting laser packages
BS ISO 6627:2011 Internal combustion engines. Piston rings. Expander/segment oil-control rings
BS EN 16482:2014 Founding. Continuous cast iron bars
BS ISO 6149-2:1993 Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Heavy-duty (S series) stud ends. Dimensions, design, test methods and requirements.
BS 6494-3:1989 Hydraulic fluid power valve mounting surfaces Specification for pressure-relief valves
11/30232174 DC : DRAFT AUG 2011 BS ISO 6550-3 - ROAD VEHICLES - SHEATH-TYPE GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 3: M10 GLOW-PLUGS
BS ISO 6623:2013 Internal combustion engines. Piston rings. Scraper rings made of cast iron
BIS IS/ISO 6621-2 : 2003(R2014) INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 2: INSPECTION MEASURING PRINCIPLES
15/30323430 DC : 0 BS EN 61240 - PIEZOELECTRIC DEVICES - PREPARATION OF OUTLINE DRAWINGS OF SURFACE-MOUNTED DEVICES (SMD) FOR FREQUENCY CONTROL AND SELECTION - GENERAL RULES
SANS 1650 : 1.01ED 1996 LIQUID FUEL DISPENSERS
BS EN 60191-6:2009 Mechanical standardization of semiconductor devices General rules for the preparation of outline drawings of surface mounted semiconductor device packages
I.S. EN ISO 14638:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
08/30184522 DC : DRAFT JUNE 2008 BS ISO 2129 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF DIMENSIONS AND TOLERANCES - MECHANICAL ENGINEERING DRAWINGS
BS EN 62149-5:2011 Fibre optic active components and devices. Performance standards ATM-PON transceivers with LD driver and CDR ICs
PREN 2605 : DRAFT 87 AEROSPACE SERIES - STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - 24 DEGREES UNION INTERFACE - DIMENSIONS
BS EN 62231:2007 Composite station post insulators for substations with a.c. voltages greater than 1000 V up to 245 kV. Definitions, test methods and acceptance criteria
ISO 9980:2012 Belt drives — Grooved pulleys for V-belts (system based on effective width) — Geometrical inspection of grooves
BS ISO 16792:2006 Technical product documentation. Digital product definition data practices
07/30168153 DC : 0 BS EN 60875-1 - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
UNE-EN ISO 12780-1:2012 Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
DIN 855-2:1990-05 CONCAVE MILLING CUTTERS - TECHNICAL DELIVERY CONDITIONS
BS ISO 14280:2002 Aerospace. Drivers, ribbed, for internal cruciform ribbed or unribbed drives. Metric series
BS EN 62007-2:2009 Semiconductor optoelectronic devices for fibre optic system applications Measuring methods
PREN 9300-200 : DRAFT 2016 AEROSPACE SERIES - LOTAR - LONG TERM ARCHIVING AND RETRIEVAL OF DIGITAL TECHNICAL PRODUCT DOCUMENTATION SUCH AS 3D, CAD AND PDM DATA - PART 200: COMMON CONCEPTS FOR LONG TERM ARCHIVING AND RETRIEVAL OF PRODUCT STRUCTURE INFORMATION
09/30198164 DC : DRAFT MAY 2009 BS EN ISO 12781-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS
I.S. EN ISO 12780-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS
ISO 7789:2007 Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities
I.S. EN ISO 2538-2:2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING (ISO 2538-2:2014)
DIN ISO 286-1:1990-11 ISO SYSTEM OF LIMITS AND FITS - BASES OF TOLERANCES, DEVIATIONS AND FITS
I.S. EN 16054:2012 BMX BICYCLES - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN ISO 2538-2 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING (ISO 2538-2:2014)
BS ISO 17841:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal fatigue of fine ceramics substrate
DIN EN ISO 12181-1:2011-07 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
BS EN 61747-1:2000 Liquid crystal and solid-state display devices Generic specification
BS QC 960000:1992 Harmonized system of quality assessment for electronic components. Electromechanical switches for use in electronic equipment. Generic specification
17/30346164 DC : 0 BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS
BS ISO 6624-1:2017 Internal combustion engines. Piston rings Keystone rings made of cast iron
STANAG 3296 : 0 AIRCRAFT GASEOUS OXYGEN REPLENISHMENT COUPLINGS
NF EN 62231 : 2007 COMPOSITE STATION POST INSULATORS FOR SUBSTATIONS WITH A.C. VOLTAGES GREATER THAN 1000 V UP TO 245 KV - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
BS ISO 11418-2 : 2016 CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 2: SCREW-NECK GLASS BOTTLES FOR SYRUPS
UNI EN ISO 12781-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS
ISO 17447-1:2015 Road Vehicles Glow-plugs with conical seating and their cylinder head housing Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs
CEI EN 62148-16 : 2011 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 16: TRANSMITTER AND RECEIVER COMPONENTS FOR USE WITH LC CONNECTOR INTERFACE
ISO 4156-3:2005 Straight cylindrical involute splines Metric module, side fit Part 3: Inspection
UNE-EN ISO 10579:2015 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
I.S. EN 61240:2017 PIEZOELECTRIC DEVICES - PREPARATION OF OUTLINE DRAWINGS OF SURFACE-MOUNTED DEVICES (SMD) FOR FREQUENCY CONTROL AND SELECTION - GENERAL RULES
DIN ISO 12164-4:2016-10 HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 4: DIMENSIONS OF RECEIVERS FOR STATIONARY TOOLS (ISO 12164-4:2014)
ISO 3030:2011 Rolling bearings Radial needle roller and cage assemblies Boundary dimensions and tolerances
I.S. EN 60679-3:2013 QUARTZ CRYSTAL CONTROLLED OSCILLATORS OF ASSESSED QUALITY - PART 3: STANDARD OUTLINES AND LEAD CONNECTIONS (IEC 60679-3:2012 (EQV))
ISO 28703:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for thermal-shock resistance of porous ceramics
ISO 1920-3:2004 Testing of concrete Part 3: Making and curing test specimens
NFL 07-115/1 : 97 XP AEROSPACE SERIES - RULES FOR THE REPRESENTATION OF ITEMS MADE OF COMPOSITE MATERIALS - GENERAL
ISO 17841:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for thermal fatigue of fine ceramics substrate
ISO 8062-4:2017 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: General tolerances for castings using profile tolerancing in a general datum system
ISO/TR 6622-2:1988 Internal combustion engines Piston rings Part 2: Rectangular rings with narrow ring width
I.S. EN ISO 17450-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION (ISO 17450-1:2011)
I.S. EN ISO 8062-3:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
NF ISO 3655 : 2006 ACCEPTANCE CONDITIONS FOR VERTICAL TURNING AND BORING LATHES WITH ONE OR TWO COLUMNS AND A SINGLE FIXED OR MOVABLE TABLE - GENERAL INTRODUCTION AND TESTING OF THE ACCURACY
AAGSP-01 : 2015 NITROGEN AND REPLENISHMENT EQUIPMENT CHARACTERISTICS
DIN EN ISO 286-2:2010-11 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
ISO 3245:2015 Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
STANAG 3624 : 2015 NITROGEN AND REPLENISHMENT EQUIPMENT CHARACTERISTICS
I.S. EN 12101-7:2011 SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS
BS EN 61837-3:2015 Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections Metal enclosures
BS EN 61264:1999 Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear
I.S. EN 61076-1:2006&A1:2019 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
CEI EN 60191-6 : 2011 MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 6: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF SURFACE MOUNTED SEMICONDUCTOR DEVICE PACKAGES
UNI ISO 22514-1 : 2014 STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 1: GENERAL PRINCIPLES AND CONCEPTS
ISO 10110-12:2007 Optics and photonics Preparation of drawings for optical elements and systems Part 12: Aspheric surfaces
ISO 129-1:2018 Technical product documentation (TPD) — Presentation of dimensions and tolerances — Part 1: General principles
I.S. EN ISO 12818:2015 GLASS PACKAGING - STANDARD TOLERANCES FOR FLACONNAGE (ISO 12818:2013)
UNI ISO 129-1 : 2011 TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
ISO 22514-1:2014 Statistical methods in process management Capability and performance Part 1: General principles and concepts
OVE/ONORM EN 62077 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
CEI EN 60874-1 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
BS ISO 6550-4:2014 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing M8 x 1 glow-plugs
PREN ISO 2692 : DRAFT 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO/DIS 2692:2012)
UNE-EN ISO 1179-2:2014 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
ISO 518:2006 Photography Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units Specification
S.R. CEN ISO TS 12180-1:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM
ISO 6412-1:2017 Technical product documentation — Simplified representation of pipelines — Part 1: General rules and orthogonal representation
ISO 7649:1991 Clutch housings for reciprocating internal combustion engines Nominal dimensions and tolerances
ISO 286-2:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
ISO 6623:2013 Internal combustion engines Piston rings Scraper rings made of cast iron
ISO 5599-2:2001 Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector
ISO 12164-2:2001 Hollow taper interface with flange contact surface — Part 2: Receivers — Dimensions
ISO 230-10:2016 Test code for machine tools Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
ISO 3070-4:1998 Test conditions for boring and milling machines with horizontal spindle Testing of the accuracy Part 4: Planer type machines with movable column
ISO 10959:2016 Aerospace MJ threads Gauging
ISO/TR 10064-3:1996 Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
ISO 9270-2:2010 7/24 taper spindle noses for automatic tool changers Part 2: Dimensions and designation of spindle noses of forms J and JF
DIN EN ISO 9187-1:2011-01 Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2010)
ISO 14610:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of porous ceramics at room temperature
I.S. EN 61020-1:2009 ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
ISO 7790:2013 Hydraulic fluid power — Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10 — Clamping dimensions
ISO 6162-1:2012 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
ISO 14280:2002 Aerospace Drivers, ribbed, for internal cruciform ribbed or unribbed drives Metric series
I.S. EN 62148-1:2002 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 1: GENERAL AND GUIDANCE
IEC 62134-1:2009 Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification
I.S. CWA 14949:2004 FUNSTEP AP-APPLICATION INTERPRETED MODEL, INCLUDING VALIDATION GUIDELINES
IEC 60191-6:2009 Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages
ISO 12164-1:2001 Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions
ISO 26623-2:2014 Polygonal taper interface with flange contact surface Part 2: Dimensions and designation of receivers
I.S. EN 62148-4:2003 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PN 1X9 PLASTIC OPTICAL FIBRE TRANSCEIVERS
ISO 17775:2006 Aircraft — Ground-service connections — Potable water, toilet-flush water and toilet drain
ISO 16873:2011 Hydraulic fluid power — Pressure switches — Mounting surfaces
ISO 14276:2002 Aerospace Drives, internal, offset cruciform Metric series
I.S. EN 1071-12:2010 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 12: RECIPROCATING WEAR TEST
ISO 6550-4:2014 Road vehicles Sheath-type glow-plugs with conical seating and their cylinder head housing Part 4: M8 x 1 glow-plugs
I.S. EN 62155:2003 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
ISO 17123-5:2018 Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 5: Total stations
IEC 62077:2015 Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification
ISO 14281:2002 Aerospace Gauges, for internal cruciform ribbed or unribbed drives Metric series
EN ISO 6414:1994 Technical drawings for glassware (ISO 6414:1982)
I.S. EN ISO 6414:1995 TECHNICAL DRAWINGS FOR GLASSWARE
DIN EN ISO 8536-1:2011-12 Infusion equipment for medical use - Part 1: Infusion glass bottles (ISO 8536-1:2011)
DIN EN ISO 2692:2015-12 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
DIN EN ISO 8362-4:2011-12 Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011)
DIN EN ISO 7711-2 E : 2011 DENTISTRY - ROTARY DIAMOND INSTRUMENTS - PART 2: DISCS (ISO 7711-2:2011)
IEC 62150-2:2010 Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers
BS EN ISO 9013:2017 Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances
EN 62148-6:2003 Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers
ISO 9974-1:1996 Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports
ISO 17450-3:2016 Geometrical product specifications (GPS) General concepts Part 3: Toleranced features
UNE-EN ISO 4759-3:2017 Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016)
IEC 62007-2:2009 Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods
BS EN ISO 6149-3:2007 Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for light-duty (L series) stud ends
IEC 62148-4:2003 Fibre optic active components and devices - Package and interface standards - Part 4: PN 1x9 plastic optical fibre transceivers
IEC 60876-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification
IEC 62772:2016 Composite hollow core station post insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V - Definitions, test methods and acceptance criteria
ISO 3019-1:2001 Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 1: Inch series shown in metric units
ISO 1660:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing
IEC 62148-18:2014 Fiber optic active components and devices - Package and interface standards - Part 18: 40-Gbit/s serial transmitter and receiver components for use with the LC connector interface
IEC 60869-1:2012 Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification
IEC 61076-7-001:2004 Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification
ISO 18391:2016 Geometrical product specifications (GPS) Population specification
ISO 2692:2014 Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
ISO 128-1:2003 Technical drawings General principles of presentation Part 1: Introduction and index
BS EN 14781:2005 Racing bicycles. Safety requirements and test methods
BS EN 20286-1:1993 ISO system of limits and fits ISO system of limits and fits. Bases of tolerances, deviations and fits
BS EN 13262 : 2004 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
BS EN 28362-4:1993 Injection containers for injectables and accessories Injection vials made of moulded glass
BS EN 286-3:1995 Simple unfired pressure vessels designed to contain air or nitrogen Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
UNE-EN ISO 8536-1:2012 Infusion equipment for medical use - Part 1: Infusion glass bottles (ISO 8536-1:2011)
UNE-EN ISO 5360:2016 Anaesthetic vaporizers - Agent-specific filling systems (ISO 5360:2016)
IEC 62148-5:2003 Fibre optic active components and devices - Package and interface standards - Part 5: SC 1x9 fibre optic modules
IEC 60874-1:2011 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
UNE-EN ISO 7711-2:2012 Dentistry - Rotary diamond instruments - Part 2: Discs (ISO 7711-2:2011)
IEC 61314-1:2011 Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification
IEC 62149-5:2009 Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs
ISO 1179-3:2007 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
BS EN ISO 10360-6:2001 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Estimation of errors in computing Gaussian associated features
BS EN ISO 6284:1999 Construction drawings. Indication of limit deviations
IEC 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
IEC 62148-17:2013 Fibre optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors
ISO 9974-3:1996 Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
ISO 2808:2007 Paints and varnishes Determination of film thickness
IEC 62341-1-1:2009 Organic light emitting diode (OLED) displays - Part 1-1: Generic specifications
ISO 1179-1:2013 Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
IEC 60875-1:2015 Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
ISO 1938-1:2015 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
ISO/TS 12781-1:2003 Geometrical Product Specifications (GPS) Flatness Part 1: Vocabulary and parameters of flatness
ISO/TS 12181-1:2003 Geometrical Product Specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness
IEC 61747-1:1998+AMD1:2003 CSV Liquid crystal and solid-state display devices - Part 1: Generic specification
ISO 2768-2:1989 General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
IEC 62231:2006 Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria
ISO 25178-1:2016 Geometrical product specifications (GPS) Surface texture: Areal Part 1: Indication of surface texture
BS EN 62149-6:2003 Fibre optic active components and devices. Performance standards 650-nm 250-Mbit/s plastic optical fibre transceivers
ISO 9409-2:2002 Manipulating industrial robots Mechanical interfaces Part 2: Shafts
IEC 61274-1:2011 Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification
ISO 12180-1:2011 Geometrical product specifications (GPS) Cylindricity Part 1: Vocabulary and parameters of cylindrical form
ISO 14660-2:1999 Geometrical Product Specifications (GPS) Geometrical features Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
IEC 60086-2:2015 Primary batteries - Part 2: Physical and electrical specifications
ISO 9974-2:1996 Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E)
ISO 14638:2015 Geometrical product specifications (GPS) Matrix model
ISO 8015:2011 Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules
IEC 62496-1:2008 Optical circuit boards - Part 1: General
ISO 12181-1:2011 Geometrical product specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness
ISO 6264:1998 Hydraulic fluid power — Pressure-relief valves — Mounting surfaces
ISO 17450-1:2011 Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification
IEC 62099:2001 Fibre optic wavelength switches - Generic specification
BS EN 12390-1:2012 Testing hardened concrete Shape, dimensions and other requirements for specimens and moulds
IEC 62074-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification
BS EN ISO 8536-1:2011 Infusion equipment for medical use Infusion glass bottles
ISO 12818:2013 Glass packaging Standard tolerances for flaconnage
IEC 61240:2016 Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - General rules
ISO 9409-1:2004 Manipulating industrial robots — Mechanical interfaces — Part 1: Plates
ISO 9013:2017 Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances
UNE-EN 12420:2015 Copper and copper alloys - Forgings
BS EN ISO 8362-4:2011 Injection containers and accessories Injection vials made of moulded glass
ISO 7711-2:2011 Dentistry Rotary diamond instruments Part 2: Discs
ISO 2538-2:2014 Geometrical product specifications (GPS) Wedges Part 2: Dimensioning and tolerancing
BS EN ISO 3650:1999 Geometrical product specifications (GPS). Length standards. Gauge blocks
BS EN 1426:2015 Bitumen and bituminous binders. Determination of needle penetration
IEC 62150-1:2005 Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance
BS EN ISO 1660:2017 Geometrical product specifications (GPS). Geometrical tolerancing. Profile tolerancing
ISO 8362-4:2011 Injection containers and accessories Part 4: Injection vials made of moulded glass
ISO 12836:2015 Dentistry Digitizing devices for CAD/CAM systems for indirect dental restorations Test methods for assessing accuracy
ISO/TS 12780-1:2003 Geometrical Product Specifications (GPS) Straightness Part 1: Vocabulary and parameters of straightness
ISO 17296-3:2014 Additive manufacturing General principles Part 3: Main characteristics and corresponding test methods
ISO 6149-2:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
BS EN 14766:2005 Mountain-bicycles. Safety requirements and test methods
IEC 61754-34:2016 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 34: Type URM connector family
IEC 62148-15:2014 Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages
ISO 12780-1:2011 Geometrical product specifications (GPS) Straightness Part 1: Vocabulary and parameters of straightness
ISO 4759-1:2000 Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
IEC 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
ISO 6149-3:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
ISO 7083:1983 Technical drawings Symbols for geometrical tolerancing Proportions and dimensions
ISO 4759-3:2016 Tolerances for fasteners Part 3: Washers for bolts, screws and nuts Product grades A, C and F
UNE-EN 12020-2:2017 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form
IEC 61076-7:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specifiation
ISO 8536-1:2011 Infusion equipment for medical use Part 1: Infusion glass bottles
EN 60862-3:2003 Surface acoustic wave (SAW) filters of assessed quality - Part 3: Standard outlines
DIN EN 14764:2006-03 CITY AND TREKKING BICYCLES - SAFETY REQUIREMENTS AND TEST METHODS
EN 61462:2007 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
EN 196-1:2016 Methods of testing cement - Part 1: Determination of strength
EN ISO 4759-3:2016 Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016)
EN ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
EN ISO 6149-2:2007 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2007)
EN 4408-001:2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 1: General rules
EN ISO 1179-2:2013 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
EN ISO 25178-1:2016 Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
EN 180000 : 1995 GENERIC SPECIFICATION: FIBRE OPTIC ATTENUATORS
EN ISO 12818 : 2015 GLASS PACKAGING - STANDARD TOLERANCES FOR FLACONNAGE (ISO 12818:2013)
EN ISO 5459:2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
EN ISO 1179-1:2013 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
EN 3848:2001 Aerospace series - Semi-finished metallic products - Methods of measuring form deviations
EN ISO 2808:2007 Paints and varnishes - Determination of film thickness (ISO 2808:2007)
EN ISO 9974-2:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996)
EN 6072:2010 Aerospace series - Metallic materials - Test methods - Constant amplitude fatigue testing
EN ISO 8362-4:2011 Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011)
EN 14879-6:2009 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers
EN 16054:2012 BMX bicycles - Safety requirements and test methods
EN ISO 3650:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - LENGTH STANDARDS - GAUGE BLOCKS
EN 15904:2010 Glass packaging - Standard tolerances for flaconnage
EN ISO 8015:2011 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
EN 14765:2005+A1:2008 Bicycles for young children - Safety requirements and test methods
EN ISO 12836:2015 Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy (ISO 12836:2015)
EN 14200:2004 Railway applications - Suspension components - Parabolic springs, steel
EN ISO 1179-3:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
EN 16482:2014 Founding - Continuous cast iron bars
EN ISO 10579:2013 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
EN ISO 15732 : 2005 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY SINGLE EDGE PRECRACKED BEAM (SEPB) METHOD (ISO 15732:2003)
EN ISO 17296-3:2016 Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014)
EN ISO 286-1:2010/AC:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010/COR 1:2013)
EN 16313:2013 Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone
EN 286-3:1994 Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
EN ISO 9187-1:2010 Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2010)
EN ISO 17450-3:2016 Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
EN ISO 1179-4 : 2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
EN ISO 8062-3 : 2007 COR 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
EN ISO 7490 : 2000 Dental gypsum-bonded casting investments (ISO 7490:2000)
EN ISO 10360-6:2001/AC:2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES (ISO 10360-6:2001/Cor 1:2007)
EN ISO 286-2:2010/AC:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010/COR 1:2013)
EN ISO 14660-2 : 1999 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 2: EXTRACTED MEDIAN LINE OF A CYLINDER AND A CONE, EXTRACTED MEDIAN SURFACE, LOCAL SIZE OF AN EXTRACTED FEATURE
EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
EN ISO 10303-210:2002 Industrial automation systems and integration - Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnection, and packaging design (ISO 10303-210:2001)
EN ISO 2538-2:2014 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
EN ISO 10135:2009 Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
EN ISO 1938-2:2017 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
EN ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
EN ISO 18391:2016 Geometrical product specifications (GPS) - Population specification (ISO 18391:2016)
EN ISO 8536-1:2011 Infusion equipment for medical use - Part 1: Infusion glass bottles (ISO 8536-1:2011)
EN ISO 9974-1:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996)
EN 286-4:1994 Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
EN ISO 9974-3:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996)
DIN EN ISO 1938-2 E : 2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
DIN ISO 3089:2010-11 Machine tools - Test conditions for self-centring, manually-operated chucks with one-piece jaws (ISO 3089:2005)
16/30327831 DC : 0 BS ISO 10791-7:2014 - TEST CONDITIONS FOR MACHINING CENTRES - PART 7: ACCURACY OF FINISHED TEST PIECES
BS EN 62148-4:2003 Fibre optic active components and devices. Package and interface standards PN 1x9 plastic optical fibre transceivers
BS ISO 12488-1:2012 Cranes. Tolerances for wheels and travel and traversing tracks General
UNE-EN ISO 8098:2015 Cycles - Safety requirements for bicycles for young children (ISO 8098:2014)
DIN EN ISO 10135:2010-02 Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
03/106304 DC : DRAFT APR 2003 BS ISO 11418-2 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 2: SCREW-NECK BOTTLES FOR SYRUPS
PREN ISO 12780-1 : DRAFT 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS
ISO 12164-3:2014 Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools
UNI EN ISO 12181-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 1: VOCABULARY AND PARAMETERS OF ROUNDNESS
BS EN 62134-1:2009 Fibre optic interconnecting devices and passive components. Fibre optic closures Generic specification
BS A 295:1985 Methods of test for self-locking nuts with maximum operating temperature less than or equal to 425°C
DIN EN 14879-6 E : 2010 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
BS EN ISO 10135:2009 Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD)
UNE-ISO 3089:2013 Machine tools -- Test conditions for self-centring, manually operated chucks with one-piece jaws
BS ISO 10791-7:2014 Test conditions for machining centres Accuracy of finished test pieces
09/30200785 DC : 0 BS EN 60122-3 - QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 3: STANDARD OUTLINES AND LEAD CONNECTIONS
DIN ISO 10578:1994-05 TECHNICAL DRAWINGS - TOLERANCING OF ORIENTATION AND OF LOCATION - PROJECTED TOLERANCE ZONE
BS ISO 2692:1988 Technical drawings. Geometrical tolerancing. Maximum material principle
UNE-ISO 3442-1:2013 Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 1: Manually operated chucks with tongue and groove type jaws
11/30212259 DC : 0 BS ISO 14610 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FLEXURAL STRENGTH OF POROUS CERAMICS AT ROOM TEMPERATURE
BS EN ISO 25178-1:2016 Geometrical product specifications (GPS). Surface texture: Areal Indication of surface texture
16/30353588 DC : 0 BS EN 61020-1 ED 3.0 - ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
16/30317593 DC : 0 BS EN ISO 20170 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DECOMPOSITION OF GEOMETRICAL CHARACTERISTICS FOR MANUFACTURING CONTROL
03/115227 DC : DRAFT SEP 2003 BS EN 14764 - BICYCLES FOR USE ON PUBLIC ROADS - SAFETY REQUIREMENTS AND TEST METHODS
ISO 14275:2002 Aerospace Drives, internal, offset cruciform, ribbed Metric series
DIN ISO 3019-1:2004-02 Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units (ISO 3019-1:2001)
ISO/TR 16570:2004 Geometrical Product Specifications (GPS) Linear and angular dimensioning and tolerancing: +/- limit specifications Step dimensions, distances, angular sizes and radii
I.S. EN 62148-6:2003 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 6: ATM-PON TRANSCEIVERS
BS ISO 6624-4:2016 Internal combustion engines. Piston rings Half keystone rings made of steel
BS 2C 19:1994 Specification for pressure re-oiling connection (new type)
DIN EN ISO 1179-4:2008-08 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
BS EN 1071-12:2010 Advanced technical ceramics. Methods of test for ceramic coatings Reciprocating wear test
14/30296857 DC : 0 BS ISO 19347 - SYNCHRONOUS BELT DRIVES - IMPERIAL PITCH TRAPEZOIDAL PROFILE SYSTEM - BELT AND PULLEYS
96/702219 DC : 0 PREN 4150 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; NUTS, BULKHEAD
BS ISO 11090-1:2014 Test conditions for die sinking electro-discharge machines (die sinking EDM). Testing of the accuracy Single-column machines (cross-slide table type and fixed-table type)
BS EN ISO 17450-1:2011 Geometrical product specifications (GPS). General concepts Model for geometrical specification and verification
DIN EN ISO 1938-2:2017-05 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
96/702227 DC : 0 PREN 4230 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY, UNIONS; STRAIGHT UNION WITH FLEXIBLE TUBE FITTING END
06/30151323 DC : DRAFT JUN 2006 BS IEC 61988-5 - PLASMA DISPLAY PANELS - PART 5: GENERIC SPECIFICATION
BS 4491-1:1989 Appliance couplers for household and similar general purposes Specification of general requirements
CEI EN 60679-3 : 2014 QUARTZ CRYSTAL CONTROLLED OSCILLATORS OF ASSESSED QUALITY - PART 3: STANDARD OUTLINES AND LEAD CONNECTIONS
ISO 17170:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for spherical indentation of porous ceramics
SAE J 1926/2 : 2016 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS
BS ISO 128-24:2014 Technical drawings. General principles of presentation Lines on mechanical engineering drawings
15/30314952 DC : 0 BS ISO 11418-3 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 3: SCREW-NECK GLASS BOTTLES (VERAL) FOR SOLID AND LIQUID DOSAGE FORMS
BS 3934-6:1992 Mechanical standardization of semiconductor devices Specification for the preparation of outline drawings of surface mounted semiconductor device packages
BS EN 62148-12:2004 Fibre optic active components and devices. Package and interface standards Laser transmitters with coaxial RF connector
DIN ISO 10110-19 E : 2016 OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 19: GENERAL DESCRIPTION OF SURFACES AND COMPONENTS (ISO 10110-19:2015)
10/30215350 DC : 0 BS ISO 16873 - HYDRAULIC FLUID POWER - PRESSURE SWITCHES - MOUNTING SURFACES
BS EN 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment Generic specification
BS EN 186000-1:1994 Harmonized system of quality assessment for electronic components. Generic specification. Connector sets for optical fibres and cables Requirements, test methods and qualification approval procedures
BS ISO 26622-1:2017 Modular taper interface with ball track system Dimensions and designation of shanks
11/30231340 DC : 0 BS EN ISO 1938-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE
16/30328245 DC : 0 BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80
DIN EN 12101-7:2011-08 Smoke and heat control systems - Part 7: Smoke duct sections
ISO/TR 18569:2004 Safety of machinery Guidelines for the understanding and use of safety of machinery standards
BS ISO 10110-6:2015 Optics and photonics. Preparation of drawings for optical elements and systems Centring tolerances
ISO 22514-6:2013 Statistical methods in process management — Capability and performance — Part 6: Process capability statistics for characteristics following a multivariate normal distribution
BS 7442-4.3:1993 Rubber or plastics covered rollers. Requirements Specification for dimensional tolerances
BS ISO 12257:2008 Aerospace. Internal six-lobe drives. Metric series
EN 62148-15:2014 Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages
BS EN ISO 1938-1:2015 Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size
13/30252091 DC : 0 BS ISO 17170 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR SPHERE INDENTATION OF POROUS CERAMICS
ISO 12164-4:2014 Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools
96/702210 DC : 0 PREN 4141 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; UNIONS, A-WAY, (IN-PLANE)
DIN ISO 3442-1:2010-08 Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 1: Manually operated chucks with tongue and groove type jaws (ISO 3442-1:2005)
07/30126052 DC : 0 BS ISO 22514-1 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 1: GENERAL PRINCIPLES AND CONCEPTS
BS ISO 10579 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS
DIN EN ISO 17450-1:2012-04 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
BS ISO 16873:2011 Hydraulic fluid power. Pressure switches. Mounting surfaces
12/30258651 DC : 0 BS ISO 492 - ROLLING BEARINGS - RADIAL BEARINGS - DIMENSIONAL AND GEOMETRICAL TOLERANCES
BS EN ISO 5459:2011 Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
96/702224 DC : 0 PREN 4227 - AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY, UNIONS, TEE, FOR FLEXIBLE TUBES
10/30218213 DC : 0 BS EN 61274-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION
ISO 11090-2:2014 Test conditions for die sinking electro-discharge machines (die sinking EDM) Testing of the accuracy Part 2: Double-column machines (slide-head type)
12/30260523 DC : 0 BS EN ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD NDS WITH ELASTOMERIC SEALING (TYPE E) (ISO/DIS 1179-2:2012)
DIN ISO 5458:1988-07 TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
13/30271610 DC : 0 BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS
I.S. EN 6072:2010 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING
10/30200334 DC : 0 BS ISO 129-1 - TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
UNI EN ISO 8015 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
DIN EN ISO 1179-3:2008-08 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
BS DD208(1992) : 1992 PISTON RINGS UP TO 200 MM DIAMETER FOR RECIPROCATING INTERNAL COMBUSTION ENGINES - SPECIFICATION FOR RECTANGULAR RINGS WITH NARROW RING WIDTH
BS ISO 13715:2017 Technical product documentation. Edges of undefined shape. Indication and dimensioning
BS EN 61754-1:2013 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces General and guidance
NF EN ISO 25178-1 : 2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 1: INDICATION OF SURFACE TEXTURE
EN 60086-2:2016 Primary batteries - Part 2: Physical and electrical specifications
DIN ISO 10110-19:2016-04 OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 19: GENERAL DESCRIPTION OF SURFACES AND COMPONENTS (ISO 10110-19:2015)
BS EN 61202-1:2017 Fibre optic interconnecting devices and passive components. Fibre optic isolators Generic specification
17/30358444 DC : 0 BS EN ISO 14405-2 AMD1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
BS ISO 14610:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of porous ceramics at room temperature
ISO 3650:1998 Geometrical Product Specifications (GPS) Length standards Gauge blocks
03/115228 DC : DRAFT SEP 2003 BS EN 14765 - BICYCLES FOR YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS
13/30286393 DC : 0 BS ISO 12164-4 - HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 4: DIMENSIONS OF RECEIVERS FOR STATIONARY TOOLS
BS EN 50066:1993 Specification for mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles
96/702215 DC : 0 PREN 4146 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; UNIONS, STRAIGHT BULKHEAD
DIN ISO 6162-1:2006-02 HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
CEI EN 50243 : 2002 OUTDOOR BUSHINGS FOR 24 KV AND 36 KV AND FOR 5 KA AND 8 KA, FOR LIQUID FILLED TRANSFORMERS
04/30112476 DC : DRAFT APR 2004
12/30274628 DC : 0 BS EN 60320-3 - APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 3: STANDARD SHEETS AND GAUGES
13/30286389 DC : 0 BS ISO 12164-3 - HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 3: DIMENSIONS OF SHANKS FOR STATIONARY TOOLS
13/30274174 DC : 0 BS ISO 8133 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES
BS EN 61977:2015 Fibre optic interconnecting devices and passive components. Fibre optic filters. Generic specification
BS ISO TR 10064-3:1996 Code of inspection practice Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
04/30124528 DC : DRAFT OCT 2004 ISO/DIS 6149-1 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
07/30172547 DC : 0 BS EN 62074-1 - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
13/30240527 DC : 0 BS ISO 129-2 - TECHNICAL PRODUCT DOCUMENTATION - INDICATION OF DIMENSIONS AND TOLERANCES - PART 2: DIMENSIONING OF MECHANICAL ENGINEERING DRAWINGS
BS EN 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
07/30168042 DC : 0 BS ISO 26622-1 - MODULAR TAPER INTERFACE WITH BALL TRACK SYSTEM - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS
13/30253349 DC : 0 BS ISO 10110-19 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 19: OPTICAL FREEFORM SURFACES
BS IEC 60191-2 : 1966 MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 2: DIMENSIONS
BS EN ISO 1797:2017 Dentistry. Shanks for rotary and oscillating instruments
BS ISO 14281:2002 Aerospace. Gauges, for internal cruciform ribbed or unribbed drives. Metric series
BS EN 175300:1997 Harmonized system of quality assessment for electronic components. Sectional specification:rectangular connectors for frequencies below 3 MHz
SAE J 1926/3 : 2016 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L-SERIES) STUD ENDS
IEC 60191-2:2012 DB Mechanical standardization of semiconductor devices - Part 2: Dimensions
BS ISO 4401:2005 Hydraulic fluid power. Four-port directional control valves. Mounting surfaces
BS ISO 3245:2015 Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
BIS IS 2102-2 : 1993(R2014) GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
04/30125584 DC : DRAFT NOV 2004 IEC 61274-1 ED 2 - ADAPTORS FOR OPTICAL FIBRES AND CABLES - PART 2: GENERIC SPECIFICATION
09/30199068 DC : 0 BS ISO 11926-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS
09/30198146 DC : DRAFT MAY 2009 BS EN ISO 12180-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM
CSA C62155 : 2006 : R2011 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
04/102835 DC : DRAFT JAN 2004 ISO 3089 - MACHINE TOOLS - TEST CONDITIONS FOR SELF-CENTRING MANUALLY OPERATED CHUCKS
BS EN 62077:2016 Fibre optic interconnecting devices and passive components. Fibre optic circulators. Generic specification
CSA Z5360 : 2008 : R2013 ANAESTHETIC VAPORIZERS - AGENT-SPECIFIC FILLING SYSTEMS
07/30167960 DC : 0 BS EN 60191-6 - MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 6: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF SURFACE MOUNTED SEMICONDUCTOR DEVICE PACKAGES
BS ISO 11090-2:2014 Test conditions for die sinking electro-discharge machines (die sinking EDM). Testing of the accuracy Double-column machines (slide-head type)
ISO 14277:2002 Aerospace Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives Metric series
DD CEN ISO/TS 12781-1:2007 Geometrical product specifications (GPS). Flatness Vocabulary and parameters of flatness
UNI EN 12101-7 : 2011 SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS
BS EN 60874-1:2012 Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables Generic specification
02/704675 DC : DRAFT MAY 2002 ISO/DIS 518 - PHOTOGRAPHY - CAMERA ACCESSORY SHOES, WITH AND WITHOUT ELECTRICAL CONTACTS, FOR PHOTOFLASH LAMPS AND ELECTRONIC PHOTOFLASH UNITS - SPECIFICATION
I.S. EN 60191-6:2009 MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 6: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF SURFACE MOUNTED SEMICONDUCTOR DEVICE PACKAGES
SAE J 1926/1 : 2016 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 1: THREADED PORT WITH O-RING SEAL IN TRUNCATED HOUSING
EN 12390-1:2012 TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS
IEC 60906-1:2009 IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c.
CEI EN 62496-4 : 2012 OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE
DIN EN 16482:2014-09 FOUNDING - CONTINUOUS CAST IRON BARS
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
UNI ISO 1708 : 2010 ACCEPTANCE CONDITIONS FOR GENERAL PURPOSE PARALLEL LATHES - TESTING OF THE ACCURACY
DIN 406-10:1992-12 TECHNICAL DRAWINGS; DIMENSIONING; DEFINITIONS, GENERAL PRINCIPLES
DIN 856-2:1990-05 CONVEX MILLING CUTTERS - TECHNICAL DELIVERY CONDITIONS
DIN ISO 6162-2:2006-02 HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS FOR USE AT PRESSURES OF 35 MPA (350 BAR) TO 40 MPA (400 BAR), DN 13 TO DN 51
PREN 9300-100 : 200P1 AEROSPACE SERIES - LOTAR - LONG TERM ARCHIVING AND RETRIEVAL OF DIGITAL TECHNICAL PRODUCT DOCUMENTATION SUCH AS 3D, CAD AND PDM DATA - PART 100: COMMON CONCEPTS FOR LONG TERM ARCHIVING AND RETRIEVAL OF CAD 3D MECHANICAL INFORMATION
I.S. EN 4408-001:2005 AEROSPACE SERIES - TECHNICAL DRAWINGS - REPRESENTATION OF PARTS MADE OF COMPOSITE MATERIALS - PART 1: GENERAL RULES
CEI EN 62149-5 : 2012 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS
I.S. EN 14879-6:2009 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
I.S. EN ISO 12836:2015 DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015)
PREN 50066 : DRAFT 2015 MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES
I.S. EN ISO 5458:1999 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
I.S. EN 16482:2014 FOUNDING - CONTINUOUS CAST IRON BARS
UNI ISO 3070-1 : 2009 MACHINE TOOLS - TEST CONDITIONS FOR TESTING THE ACCURACY OF BORING AND MILLING MACHINES WITH HORIZONTAL SPINDLE - PART 1: MACHINES WITH FIXED COLUMN AND MOVABLE TABLE
I.S. EN 62150-1:2005 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
I.S. EN IEC 61076-3-119:2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ
UNI ISO 3442-2 : 2009 MACHINE TOOLS - DIMENSIONS AND GEOMETRIC TESTS FOR SELF-CENTRING CHUCKS WITH TWO-PIECE JAWS - PART 2: POWER-OPERATED CHUCKS WITH TONGUE AND GROOVE TYPE JAWS
I.S. EN ISO 1938-1:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 1938-1:2015)
ISO 4156-1:2005 Straight cylindrical involute splines Metric module, side fit Part 1: Generalities
UNI EN 16054 : 2012 BMX BICYCLES - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 60876-1:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
CEI EN 62134-1 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
UNI EN ISO 14405-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
I.S. EN 181000:1994 FIBRE OPTIC BRANCHING DEVICES (GENERIC SPECIFICATION)
I.S. EN 61274-1:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION (IEC 61274-1:2011 (EQV))
I.S. EN ISO 8098:2014 CYCLES - SAFETY REQUIREMENTS FOR BICYCLES FOR YOUNG CHILDREN (ISO 8098:2014)
I.S. EN 60320-3:2014 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 3: STANDARD SHEETS AND GAUGES
I.S. EN ISO 12181-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 1: VOCABULARY AND PARAMETERS OF ROUNDNESS
ISO 28704:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for cyclic bending fatigue of porous ceramics at room temperature
I.S. EN ISO 1179-3:2008 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
ISO 16792:2015 Technical product documentation Digital product definition data practices
ISO 12256:2002 Aerospace Drives, internal, cruciform, ribbed Metric series
ISO 6162-2:2018 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
NFPA T3.5.50 : 2009 : R2014 HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS
BS EN ISO 14978:2006 Geometrical Product Specifications (GPS). General concepts and requirements for GPS measuring equipment
I.S. EN ISO 8015:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
NFPA T3.5.50 : 2009 HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS
ISO 21927-7:2017 Smoke and heat control systems — Part 7: Smoke ducts sections
ISO 12488-1:2012 Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General
BS EN 61837-2 : 2011 SURFACE MOUNTED PIEZOELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTION - STANDARD OUTLINES AND TERMINAL LEAD CONNECTIONS - PART 2: CERAMIC ENCLOSURES
NF ISO 13041-6 : 2009 TEST CONDITIONS FOR NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES - PART 6: ACCURACY OF A FINISHED TEST PIECE
ISO 3019-2:2001 Hydraulic fluid power Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors Part 2: Metric series
UNI EN ISO 1179-1 : 2013 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS
UNI EN ISO 1179-2 : 2013 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E)
I.S. EN ISO 18391:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - POPULATION SPECIFICATION (ISO 18391:2016)
NF EN ISO 14405-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
UNE-EN ISO 17296-3:2017 Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014)
UNI EN 12390-1 : 2012 TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS
ISO 6622-1:2003 Internal combustion engines Piston rings Part 1: Rectangular rings made of cast iron
ISO 1206:2018 Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
I.S. EN 61754-1:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE
IEC 60807-1:1991 Rectangular connectors for frequencies below 3 MHz - Part 1:Generic specification - General requirements and guide for thepreparation of detail specifications for connectors with assessedquality
I.S. EN 62496-1:2009 OPTICAL CIRCUIT BOARDS - PART 1: GENERAL
I.S. CEN ISO TS 17450-1:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION (ISO/TS 17450-1:2005)
ISO 10303-224:2006 Industrial automation systems and integration — Product data representation and exchange — Part 224: Application protocol: Mechanical product definition for process planning using machining features
ISO 26303:2012 Machine tools Short-term capability evaluation of machining processes on metal-cutting machine tools
I.S. CECC 86000:1993 CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - PART 1: REQUIREMENTS, TEST METHODS AND QUALIFICATION APPROVAL PROCEDURES (GENERIC SPECIFICATION)
I.S. ENV 14443:2004
ISO 3601-2:2016 Fluid power systems — O-rings — Part 2: Housing dimensions for general applications
ISO 6624-1:2017 Internal combustion engines — Piston rings — Part 1: Keystone rings made of cast iron
I.S. EN ISO 8362-1:2009 INJECTION CONTAINERS AND ACCESSORIES - PART 1: INJECTION VIALS MADE OF GLASS TUBING (ISO 8362-1:2009)
IEC 62148-6:2003 Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers
CEN ISO/TS 8062-2 : 2013 COR 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
DIN EN ISO 6149-3:2007-05 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)
DIN EN ISO 9409-1:2004-09 MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES
DIN EN ISO 4759-1 E : 2001 TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C
DIN EN ISO 6149-2:2007-05 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)
DIN EN 12020-2:2015-12 (Draft) ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 2: TOLERANCES ON DIMENSIONS AND FORM
BS EN ISO 4759-1:2001 Tolerances for fasteners Bolts, screws, studs and nuts. Product grades A, B and C
IEC 61073-1:2009 Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification
ISO 8098:2014 Cycles — Safety requirements for bicycles for young children
BS EN ISO 9409-2:2003 Manipulating industrial robots. Mechanical interfaces Shafts
BS EN ISO 15732:2005 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
ISO 1179-2:2013 Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
BS EN ISO 7083:1995 Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions
IEC 60862-3:2003 Surface acoustic wave (SAW) filters of assessed quality - Part 3: Standard outlines
PD ISO/TR 18569:2004 Safety of machinery. Guidelines for the understanding and use of safety of machinery standards.
ISO 10578:1992 Technical drawings Tolerancing of orientation and location Projected tolerance zone
BS EN 14764:2005 City and trekking bicycles. Safety requirements and test methods
BS EN ISO 9974-2:2000 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with elastomeric sealing (type E)
ISO 1938-2:2017 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges
UNE-EN 12390-1:2013 Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds
ISO/TS 8062-2:2013 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules
BS EN ISO 6149-2:2007 Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
ISO 5360:2016 Anaesthetic vaporizers Agent-specific filling systems
ISO 1179-4:2007 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
ISO 15732:2003 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
ISO 12781-1:2011 Geometrical product specifications (GPS) Flatness Part 1: Vocabulary and parameters of flatness
BS EN 20286-2:1993 ISO system of limits and fits ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts
BS EN 1280-1:1997 Agent specific filling systems for anaesthetic vaporizers Rectangular keyed filling systems
IEC 60368-3:2010 Piezoelectric filters of assessed quality - Part 3: Standard outlines and lead connections
BS EN 286-4:1995 Simple unfired pressure vessels designed to contain air or nitrogen Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
BS EN ISO 7711-2:2011 Dentistry. Rotary diamond instruments Discs
EN 62099:2001 Fibre optic wavelength switches - Generic specification
EN 62148-18:2015 Fibre optic active components and devices - Package and interface standards - Part 18: 40-Gbit/s serial transmitter and receiver components for use with the LC connector interface
EN 1071-13:2010 Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method
DIN EN ISO 5360:2016-07 ANAESTHETIC VAPORIZERS - AGENT-SPECIFIC FILLING SYSTEMS (ISO 5360:2016)
DIN ISO 10110-12:2016-04 Optics and photonics - Preparation of drawings for optical elements and systems - Part 12: Aspheric surfaces (ISO 10110-12:2007 + Amd 1:2013)
EN 61978-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification
EN 60875-1:2015 Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
EN 62148-12:2004 Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with coaxial RF connector
ONORM EN 12390-1 : 2012 TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS
EN 62150-2:2011 Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers
EN 62074-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification
EN ISO 12180-1:2011 Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
EN 60122-3:2010 Quartz crystal units of assessed quality - Part 3: Standard outlines and lead connections
EN 60191-6:2009 Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages
EN 62341-1-1:2009 Organic light emitting diode (OLED) displays - Part 1-1: Generic specifications
EN ISO 17450-1:2011 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
EN 50342-2:2007/A1:2014 LEAD-ACID STARTER BATTERIES - PART 2: DIMENSIONS OF BATTERIES AND MARKING OF TERMINALS
EN 14781 : 2005 RACING BICYCLES - SAFETY REQUIREMENTS AND TEST METHODS
EN ISO 12781-1:2011 Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
DIN ISO 12164-3:2016-10 HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE - PART 3: DIMENSIONS OF SHANKS FOR STATIONARY TOOLS (ISO 12164-3:2014)
EN 50066:1992 Mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles
EN 62148-5:2003 Fibre optic active components and devices - Package and interface standards - Part 5: SC 1x9 fibre optic modules
EN 61747-1:1999/A1:2003 LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 1: GENERIC SPECIFICATION
EN 60869-1:2013 Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification
CEN ISO/TS 12180-1:2007 Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO/TS 12180-1:2003)
EN 61269-1:1997 Fibre optic terminus sets - Part 1: Generic specification
EN 62150-1:2005 Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance
DIN EN 14765:2008-06 BICYCLES FOR YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS
EN 61274-1:2012 Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification
EN 62496-4:2011 Optical circuit boards - Part 4: Interface standards - General and guidance
EN ISO 1302 : 2002 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION (ISO 1302:2002)
DIN EN 14200:2004-05 Railway applications - Suspension components - Parabolic springs, steel
EN 14764 : 2005 CITY AND TREKKING BICYCLES - SAFETY REQUIREMENTS AND TEST METHODS
EN 60320-3:2014 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
EN 61754-1:2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance
EN 60876-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification
EN 61073-1:2009 Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification
EN 175300:1996 Sectional Specification: Rectangular connectors for frequencies below 3 MHz
EN 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
I.S. EN ISO 6284:1999 CONSTRUCTION DRAWINGS - INDICATION OF LIMIT DEVIATIONS

ISO 8015:2011 Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules
ISO 14638:2015 Geometrical product specifications (GPS) Matrix model
ISO 5459:2011 Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
ISO/TS 17863:2013 Geometrical product specification (GPS) Tolerancing of moveable assemblies
ISO 2692:2014 Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
ISO 128-24:2014 Technical drawings General principles of presentation Part 24: Lines on mechanical engineering drawings
ISO 3098-5:1997 Technical product documentation Lettering Part 5: CAD lettering of the Latin alphabet, numerals and marks
ISO 7083:1983 TECHNICAL DRAWINGS - SYMBOLS FOR GEOMETRICAL TOLERANCING - PROPORTIONS AND DIMENSIONS
ISO 14253-1:2017 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications
ISO 3040:2016 Geometrical product specifications (GPS) Dimensioning and tolerancing Cones
ISO 17450-1:2011 Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification
ISO 3098-1:2015 Technical product documentation Lettering Part 1: General requirements
ISO 81714-1:2010 Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules
ISO 3098-2:2000 Technical product documentation — Lettering — Part 2: Latin alphabet, numerals and marks
ISO 17450-3:2016 Geometrical product specifications (GPS) General concepts Part 3: Toleranced features
ISO 22432:2011 Geometrical product specifications (GPS) — Features utilized in specification and verification
ISO 17450-2:2012 Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
ISO 13715:2017 Technical product documentation Edges of undefined shape Indication and dimensioning
ISO 1660:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing
ISO 16792:2015 Technical product documentation Digital product definition data practices
ISO 25378:2011 Geometrical product specifications (GPS) Characteristics and conditions Definitions
ISO 10579:2010 Geometrical product specifications (GPS) Dimensioning and tolerancing Non-rigid parts
ISO 5458:1998 Geometrical Product Specifications (GPS) Geometrical tolerancing Positional tolerancing

View more information
US$251.00
Excluding Tax where applicable