ISO 11171:2016
Withdrawn
Withdrawn
View Superseded by
Hydraulic fluid power — Calibration of automatic particle counters for liquids
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
10-05-2016
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO 11171:2016 specifies procedures for the following:
a) primary particle-sizing calibration, sensor resolution and counting performance of automatic particle counters (APCs) for liquids capable of analysing bottle samples;
b) secondary particle-sizing calibration using suspensions verified with a primary calibrated APC;
c) establishing acceptable operation and performance limits;
d) verifying particle sensor performance using a truncated test dust;
e) determining coincidence and flow rate limits.
| Committee |
ISO/TC 131/SC 6
|
| DevelopmentNote |
Supersedes ISO 4402. (01/2000) Supersedes NFPA T2.9.6 (09/2004) Supersedes ISO/DIS 11171. (10/2016)
|
| DocumentType |
Standard
|
| Pages |
51
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SS-ISO 11171:2018 | Identical |
| NEN ISO 11171 : 2016 | Identical |
| NF ISO 11171 : 2011 | Identical |
| BS ISO 11171:2016 | Identical |
| GOST R ISO 11171 : 2012 | Identical |
| SAC GB/T 18854 : 2002 | Identical |
| BS 7403-12:2000 | Full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting, and contaminant retention capacity |
| DD ISO/TS 11365:2011 | Petroleum and related products. Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids |
| MIL-DTL-83133 Revision J:2015 | Turbine Fuel, Aviation, Kerosene Type, JP-8 (NATO F-34) and NATO F-35 |
| BS EN 60970:2007 | Insulating liquids. Methods for counting and sizing particles |
| MIL-DTL-8815-31 Base Document:2009 | Filter Elements, Non-Cleanable, Fluid Pressure, Hydraulic Line, 3,000 PSI, 5 Micron Absolute, -65 Degrees F to 275 Degrees F |
| 05/30098238 DC : 0 | ISO 21081-2 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 2: FILTER BLOCKAGE TECHNIQUE |
| 01/120731 DC : DRAFT FEB 2001 | BS ISO 13323-3 - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SINGLE PARTICLE LIGHT INTERACTION METHODS - PART 3: SINGLE-PARTICLE LIGHT-EXTINCTION DEVICE DESIGN, PERFORMANCE SPECIFICATIONS AND OPERATION REQUIREMENTS |
| BS ISO 16431:2012 | Hydraulic fluid power. System clean-up procedures and verification of cleanliness of assembled systems |
| 07/19969755 DC : 0 | BS ISO 11500 - HYDRAULIC FLUID POWER - DETERMINATION OF PARTICULATE CONTAMINATION LEVEL OF A LIQUID SAMPLE BY AUTOMATIC PARTICLE COUNTING USING THE LIGHT EXTINCTION PRINCIPLE |
| BS ISO 14085-3:2015 | Aerospace series. Hydraulic filter elements. Test methods Filtration efficiency and retention capacity |
| BS ISO 19438:2003 | Diesel fuel and petrol filters for internal combustion engines. Filtration efficiency using particle counting and contaminant retention capacity |
| 05/30129166 DC : DRAFT OCT 2005 | BS ISO 281 - ROLLING BEARINGS - DYNAMIC LOAD RATINGS AND RATING LIFE |
| BS ISO 281:2007 | Rolling bearings. Dynamic load ratings and rating life |
| EI 1570 : 2012 | HANDBOOK ON ELECTRONIC SENSORS FOR THE DETECTION OF PARTICULATE MATTER AND/OR FREE WATER DURING AIRCRAFT REFUELLING |
| BS ISO 4406:2017 | Hydraulic fluid power. Fluids. Method for coding the level of contamination by solid particles |
| ISO 28521:2009 | Ships and marine technology — Hydraulic oil systems — Guidance for grades of cleanliness and flushing |
| I.S. EN 61221:2004 | PETROLEUM PRODUCTS AND LUBRICANTS - TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) - SPECIFICATIONS |
| ISO 21018-3:2008 | Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 3: Use of the filter blockage technique |
| SAE J1985_201310 | Fuel Filter - Initial Single-Pass Efficiency Test Method |
| ISO 4548-12:2017 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting and contaminant retention capacity |
| ASTM D 8072 : 2017 | Standard Classification for Reporting Solids and Insoluble Water Contamination of Hydrocarbon-Based Petroleum Products When Analyzed by Imaging Instrumentation |
| ISO 16889:2008 | Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element |
| MIL-DTL-83133 Revision K:2018 | Turbine Fuel, Aviation, Kerosene Type, JP-8 (NATO F-34) and NATO F-35 |
| PD ISO/TR 15640:2011 | Hydraulic fluid power contamination control. General principles and guidelines for selection and application of hydraulic filters |
| MIL-STD-419 Revision E:2010 | Cleaning, Protecting, and Testing Piping, Tubing, and Fittings for Hydraulic Power Transmission Equipment |
| 05/30098184 DC : DRAFT MAY 2005 | ISO 8068 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES |
| ASTM D 6786 : 2015 : REDLINE | Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters |
| ISO/TS 13353:2002 | Diesel fuel and petrol filters for internal combustion engines — Initial efficiency by particule counting |
| 08/30168621 DC : DRAFT JAN 2008 | BS ISO 28521 - SHIPS AND MARINE TECHNOLOGY - HYDRAULIC OIL SYSTEMS - GUIDANCE FOR GRADES OF CLEANLINESS AND FLUSHING |
| 16/30266482 DC : 0 | BS ISO 12669 - HYDRAULIC FLUID POWER - METHOD FOR DETERMINING THE REQUIRED CLEANLINESS LEVEL (RCL) FOR A SYSTEM |
| MIL-DTL-25524 Revision F:2015 | Turbine Fuel, Aviation, Thermally Stable (JPTS) |
| 05/30138884 DC : DRAFT SEP 2005 | |
| BS EN 61221:2004 | Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications |
| MIL-DTL-8815-32 Base Document:2010 | Filter Elements, Non-Cleanable, Fluid Pressure, Hydraulic Line, 3000 PSI, 5 Micron Absolute, - 65 Degrees F to 275 Degrees F, H-60 Aircraft |
| DIN ISO 281:2010-10 | Rolling bearings - Dynamic load ratings and rating life (ISO 281:2007) |
| PD ISO/TR 1281-2:2008 | Rolling bearings. Explanatory notes on ISO 281 Modified rating life calculation, based on a systems approach to fatigue stresses |
| 14/30273508 DC : 0 | BS ISO 21018-4 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION IN THE FLUID - PART 4: USE OF THE LIGHT EXTINCTION TECHNIQUE |
| ASTM D 8166 : 2017 | Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters |
| ISO 16431:2012 | Hydraulic fluid power — System clean-up procedures and verification of cleanliness of assembled systems |
| NFE 48 695 : 2003 | HYDRAULIC FLUID POWER - PARTS AND COMPONENTS - EXPRESSION OF PARTICULATE POLLUTION MEASUREMENT RESULTS |
| ISO 14085-3:2015 | Aerospace series — Hydraulic filter elements — Test methods — Part 3: Filtration efficiency and retention capacity |
| BS ISO 16889 : 2008 | HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT |
| ASTM D 7684 : 2011 | Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants |
| NF ISO 21018-1 : 2008 | HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 1: GENERAL PRINCIPLES |
| ISO 9940:2015 | Aerospace series — Fluid, hydraulic, phosphate ester-base, fire resistant — Technical specification |
| ASTM D 7416 : 2009 : R2015 | Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester |
| DIN ISO 281 Beiblatt 5:2011-10 | ROLLING BEARINGS - DYNAMIC LOAD RATINGS AND RATING LIFE |
| BS ISO 21018-1:2008 | Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid General principles |
| BS ISO 23309:2007 | Hydraulic fluid power systems. Assembled systems. Methods of cleaning lines by flushing |
| ISO 16232-9:2007 | Road vehicles — Cleanliness of components of fluid circuits — Part 9: Particle sizing and counting by automatic light extinction particle counter |
| BS ISO 10050:2005 | Lubricants, industrial oils and related products (class L). Family T (Turbines). Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) |
| 15/30284298 DC : 0 | BS ISO 12103-1 - ROAD VEHICLES - TEST CONTAMINANTS FOR FILTER EVALUATION - PART 1: ARIZONA TEST DUST |
| PD ISO/TS 18409:2018 | Hydraulic fluid power. Hose and hose assemblies. Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
| 08/30168618 DC : DRAFT JAN 2008 | BS ISO 28523 - SHIPS AND MARINE TECHNOLOGY - SAMPLING FROM LUBRICATING OIL AND HYDRAULIC OIL SYSTEMS - GUIDANCE FOR SAMPLING FOR DETERMINATION OF CLEANLINESS AND SOLID PARTICLE CONTAMINATION |
| BS ISO 12103-1:2016 | Road vehicles. Test contaminants for filter evaluation Arizona test dust |
| PD ISO/TS 16431:2002 | Hydraulic fluid power. Assembled systems. Verification of cleanliness |
| MIL-PRF-87257 Revision C:2017 | Hydraulic Fluid, Fire Resistant, Low Temperature, Synthetic Hydrocarbon Base, Aircraft and Missile |
| 16/30273511 DC : 0 | BS ISO 23309 - HYDRAULIC FLUID POWER SYSTEMS - ASSEMBLED SYSTEMS - METHODS OF CLEANING LINES BY FLUSHING |
| 16/30323482 DC : 0 | BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS |
| MIL-PRF-87252 Revision D:2015 | Coolant Fluid, Hydrolytically Stable, Dielectric |
| ISO/TR 16386:2014 | Impact of changes in ISO fluid power particle counting — Contamination control and filter test standards |
| ASTM D 7619 : 2017 : REDLINE | Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter |
| ISO 8068:2006 | Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines |
| SAE ARP1827C | Measuring Aircraft Gas Turbine Engine Fine Fuel Filter Element Performance |
| ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| ASTM D 7417 : 2017 : REDLINE | Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter) |
| ISO/TR 16144:2002 | Hydraulic fluid power — Calibration of liquid automatic particle counters — Procedures used to certify the standard reference material SRM 2806 |
| BS ISO 18413:2015 | Hydraulic fluid power. Cleanliness of components. Inspection document and principles related to contaminant extraction and analysis, and data reporting |
| ISO 19438:2003 | Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity |
| SAE J1227_201302 | Assessing Cleanliness of Hydraulic Fluid Power Components and Systems |
| ASTM D 7647 : 2010 | Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction |
| NF ISO 16232-9 : 2011 | ROAD VEHICLES - CLEANLINESS OF COMPONENTS OF FLUID CIRCUITS - PART 9: PARTICLE SIZING AND COUNTING BY AUTOMATIC LIGHT EXTINCTION PARTICLE COUNTER |
| ISO 21018-4:2016 | Hydraulic fluid power — Monitoring the level of particulate contamination in the fluid — Part 4: Use of the light extinction technique |
| ISO/TS 11365:2011 | Petroleum and related products — Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids |
| ISO 12584:2013 | Aerospace — Hydraulic fluid components — Expression of particulate contamination levels |
| ISO 18436-5:2012 | Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst |
| I.S. EN 60970:2007/AC:2008 | INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES |
| ISO 12103-1:2016 | Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust |
| ASTM D 6813 : 2002 : REV A : R2007 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ASTM D 6813 : 2002 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ASTM D 6813 : 2002 : REV A : R2013 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps (Withdrawn 2015) |
| ASTM D 6813 : 2002 : REV A | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ISO 21018-1:2008 | Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 1: General principles |
| BS ISO 9940:2015 | Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification |
| 11/30187639 DC : 0 | BS ISO 12584 - AEROSPACE - HYDRAULIC FLUID COMPONENTS - EXPRESSION OF PARTICULATE CONTAMINATION LEVELS |
| NF ISO 21018-3 : 2008 | HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 3: USE OF THE FILTER BLOCKAGE TECHNIQUE |
| DIN ISO 281 Beiblatt 3:2009-07 | ROLLING BEARINGS - DYNAMIC LOAD RATINGS AND RATING LIFE - SUPPLEMENT 3: ESTIMATING OF THE CONTAMINATION FACTOR RESPECTIVELY THE CONTAMINATION LEVEL FOR ROLLING BEARINGS IN CLOSED INDUSTRIAL GEAR UNITS |
| NF ISO 11500 : 2008 | HYDRAULIC FLUID POWER - DETERMINATION OF THE PARTICULATE CONTAMINATION LEVEL OF A LIQUID SAMPLE BY AUTOMATIC PARTICLE COUNTING USING THE LIGHT-EXTINCTION PRINCIPLE |
| BS ISO 8068:2006 | Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines |
| 13/30271035 DC : 0 | BS ISO 14085-3 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 3: FILTRATION EFFICIENCY AND RETENTION CAPACITY |
| BS ISO 21018-3:2008 | Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid Use of the filter blockage technique |
| 05/30098235 DC : 0 | ISO 21081-1 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 1: GENERAL PRINCIPLES |
| DD ISO/TR 16144:2002 | Hydraulic fluid power. Calibration of liquid automatic particle counters. Procedures used to certify the standard reference material SRM 2806 |
| 17/30360001 DC : 0 | BS ISO 21018-4 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION IN THE FLUID - PART 4: USE OF THE LIGHT EXTINCTION TECHNIQUE |
| 14/30302298 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| BS ISO 11500:2008 | Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| BS ISO 18436-5:2012 | Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Lubricant laboratory technician/analyst |
| 00/704296 DC : DRAFT FEB 2000 | ISO/CD 16431 - HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - METHOD FOR ACHIEVING ROLL-OFF CLEANLINESS |
| BS ISO 12584:2013 | Aerospace. Hydraulic fluid components. Expression of particulate contamination levels |
| SAE ARP5454B | Multi-Pass Method for Evaluating Filtration Performance of Fine Lube Filter Elements Utilized in Aerospace Power and Propulsion Lubrication Systems |
| 16/30316730 DC : 0 | BS ISO 4548-12 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 12: FILTRATION EFFICIENCY USING PARTICLE COUNTING, AND CONTAMINANT RETENTION CAPACITY |
| BS ISO 16232-9:2007 | Road vehicles. Cleanliness of components of fluid circuits Particle sizing and counting by automatic light extinction particle counter |
| ISO 11943:1999 | Hydraulic fluid power — On-line automatic particle-counting systems for liquids — Methods of calibration and validation |
| ASTM D 7416 : 2009 | Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance, NATO Code H-515 |
| IEEE C57.152-2013 | IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors |
| SAE AIR1666B | Performance Testing of Lubricant Filter Elements Utilized in Aircraft Power and Propulsion Lubrication Systems |
| ISO 11365:2017 | Petroleum and related products — Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids |
| NF ISO 16889 : 2008 | HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT |
| ASTM D 7684 : 2011 : R2016 | Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants |
| SAE J2312_201305 | Automatic Transmission Intake Filter Test Procedure |
| ISO/TS 11366:2011 | Petroleum and related products — Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
| ISO 10050:2005 | Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) |
| ISO/TR 15640:2011 | Hydraulic fluid power contamination control — General principles and guidelines for selection and application of hydraulic filters |
| ISO 28523:2009 | Ships and marine technology — Lubricating and hydraulic oil systems — Guidance for sampling to determine cleanliness and particle contamination |
| I.S. CWA 15375:2005 | SEPARATORS FOR MARINE RESIDUAL FUEL - PERFORMANCE TESTING USING SPECIFIC TEST OIL |
| ASTM D 6973 : 2014 : REDLINE | Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump |
| IEC 60970:2007 | Insulating liquids - Methods for counting and sizing particles |
| BS ISO/TR 16386:1999 | Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards |
| IEC 61221:2004 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
| 08/30187368 DC : DRAFT JULY 2008 | BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS |
| 08/30187364 DC : DRAFT JULY 2008 | BS ISO 11366 - PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR IN-SERVICE MONITORING OF LUBRICATING OILS FOR STEAM, GAS AND COMBINED-CYCLE TURBINES |
| EN 60970:2007/corrigendum:2008 | INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES |
| EI 1598 : 2012 | DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC SENSORS TO MONITOR FREE WATER AND/OR PARTICULATE MATTER IN AVIATION FUEL |
| 15/30321906 DC : 0 | BS ISO 11943 - HYDRAULIC FLUID POWER - ON-LINE AUTOMATIC PARTICLE-COUNTING SYSTEMS FOR LIQUIDS - METHODS OF CALIBRATION AND VALIDATION |
| 04/30098167 DC : DRAFT APR 2004 | ISO 16232-9 - ROAD VEHICLES - FLUID CIRCUITS - CLEANLINESS OF COMPONENTS - PART 9: PARTICLE SIZING AND COUNTING BY AUTOMATIC LIGHT EXTINCTION PARTICLE COUNTER |
| PD ISO/TR 16386:2014 | Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards |
| ISO/TR 1281-2:2008 | Rolling bearings — Explanatory notes on ISO 281 — Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses |
| BS ISO 11365:2017 | Petroleum and related products. Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids |
| 08/30190684 DC : DRAFT OCT 2008 | BS ISO 18436-5 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST |
| BS ISO 4548-12:2017 | Methods of test for full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting and contaminant retention capacity |
| 09/30176303 DC : 0 | BS ISO 16431 - HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - SYSTEM CLEAN-UP PROCEDURES AND VERIFICATION OF CLEANLINESS |
| 98/717481 DC : DRAFT DEC 1998 | ISO/CD 16009 - HYDRAULIC FLUID POWER - FILTER - METHOD FOR DETERMINING FILTRATION PERFORMANCE OF AN OFF-LINE ELEMENT |
| 05/30098254 DC : DRAFT JUL 2005 | ISO 23309 - HYDRAULIC FLUID POWER - PIPING SYSTEMS - METHODS FOR CLEANING AND FLUSHING |
| ISO/TS 18409:2018 | Hydraulic fluid power — Hose and hose assemblies — Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
| DIN 51515-2:2010-02 | Lubricants and governor fluids for turbines - Minimum requirements - Part 2: Turbine oils TG for high temperature service |
| DIN 51515-1:2010-02 | Lubricants and governor fluids for turbines - Minimum requirements - Part 1: Turbine oils TD for normal service |
| CEI EN 60970 : 2007 | INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES |
| MIL-DTL-8815-33 Base Document:2011 | Filter Elements, Non-Cleanable, Fluid Pressure, Hydraulic Line, 3500 PSI, 5 Micron Absolute,-65 Degrees F to 275 Degrees F, Aviation Ground Power Unit (AGPU) |
| ISO 281:2007 | Rolling bearings — Dynamic load ratings and rating life |
| BS ISO 21018-4:2016 | Hydraulic fluid power. Monitoring the level of particulate contamination in the fluid Use of the light extinction technique |
| ISO 18413:2015 | Hydraulic fluid power — Cleanliness of components — Inspection document and principles related to contaminant extraction and analysis, and data reporting |
| SAE J2333_201305 | Ship Systems and Equipment - Hydraulic Systems - Filter Selection Parameters |
| ISO 23309:2007 | Hydraulic fluid power systems — Assembled systems — Methods of cleaning lines by flushing |
| DD ISO/TS 11366:2011 | Petroleum and related products. Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
| EN 61221:2004 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
| ISO 5598:2008 | Fluid power systems and components — Vocabulary |
| ISO/TR 16144:2002 | Hydraulic fluid power — Calibration of liquid automatic particle counters — Procedures used to certify the standard reference material SRM 2806 |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance, NATO Code H-515 |
| ISO 21501-3:2007 | Determination of particle size distribution — Single particle light interaction methods — Part 3: Light extinction liquid-borne particle counter |
| ISO 3722:1976 | Hydraulic fluid power — Fluid sample containers — Qualifying and controlling cleaning methods |
| ISO 16889:2008 | Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element |
| ISO 12103-1:2016 | Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust |
| ISO 4402:1991 | Hydraulic fluid power — Calibration of automatic-count instruments for particles suspended in liquids — Method using classified AC Fine Test Dust contaminant |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.