ISO 1183-1:2012
Withdrawn
Withdrawn
View Superseded by
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
Available format(s)
Hardcopy , PDF
Language(s)
English, French, Russian
Published date
05-11-2012
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
| Committee |
ISO/TC 61/SC 5
|
| DevelopmentNote |
Together with ISO 1183-2 and ISO 1183-3 supersedes ISO 1183 (07/2004) DRAFT ISO/DIS 1183-1 is also available for this standard. (01/2018)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DS EN ISO 1183-1 : 2013 | Identical |
| BS EN ISO 1183-1:2012 | Identical |
| PN EN ISO 1183-1 : 2013 | Identical |
| NEN EN ISO 1183-1 : 2012 | Identical |
| NS EN ISO 1183-1 : 2012 | Identical |
| NF EN ISO 1183-1 : 2013 | Identical |
| NBN EN ISO 1183-1 : 2013 | Identical |
| I.S. EN ISO 1183-1:2012 | Identical |
| SS-EN ISO 1183-1 : 2012 | Identical |
| DIN EN ISO 1183-1:2013-04 | Identical |
| EN ISO 1183-1:2012 | Identical |
| UNE-EN ISO 1183-1:2013 | Identical |
| 13/30280703 DC : 0 | BS EN 1329-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| PREN 13361 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| I.S. EN ISO 10350-1:2017 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS (ISO 10350-1:2017) |
| BS EN ISO 16396-2:2017 | Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 1452-2:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U) Pipes |
| BS EN 16506:2014 | Systems for renovation of drains and sewers. Lining with a rigidly anchored plastics inner layer (RAPL) |
| I.S. EN 10329:2006 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| I.S. EN 60674-2:2017 | SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| I.S. EN ISO 7792-2:2012 | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012) |
| PREN 13491 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| 07/30172710 DC : 0 | BS EN 438-8 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 8: CLASSIFICATION AND SPECIFICATIONS FOR DESIGN LAMINATES |
| 17/30357440 DC : DRAFT SEP 2017 | BS EN 438-8 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 8: CLASSIFICATION AND SPECIFICATIONS FOR DESIGN LAMINATES |
| 16/30338114 DC : 0 | BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| 10/30211370 DC : DRAFT JUNE 2010 | BS ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM |
| 17/30339707 DC : 0 | BS ISO 21138-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: PIPES AND FITTINGS WITH SMOOTH EXTERNAL SURFACE, TYPE A |
| 16/30334902 DC : 0 | BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS |
| BS ISO 16525-1:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives General test methods |
| BS EN 16994:2018 | Clay Geosynthetic Barriers. Characteristics required for use in the construction of underground structures (other than tunnels and associated structures) |
| 17/30349217 DC : 0 | BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 17855-1:2015-02 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 17855-1:2014) |
| I.S. EN ISO 12086-1:2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| BS ISO 20753 : 2008 | PLASTICS - TEST SPECIMENS |
| BS ISO 23559:2011 | Plastics. Film and sheeting. Guidance on the testing of thermoplastic films |
| S.R. CEN ISO/TR 22007-5:2014 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 5: RESULTS OF INTERLABORATORY TESTING OF POLY(METHYL METHACRYLATE) SAMPLES (ISO/TR 22007-5:2011) |
| 14/30311109 DC : 0 | BS EN 1453-1 - PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM |
| 11/30229997 DC : 0 | BS EN 14427 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| DIN EN 16506:2014-12 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| 08/30170332 DC : DRAFT JAN 2008 | BS EN ISO 8986-2 - PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 16/30303428 DC : 0 | BS EN 15507 - PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - COMPARATIVE MATERIAL TESTING OF POLYETHYLENE GRADES |
| BS EN 4702-05:2017 | Aerospace series. Quick release fastening systems for non-structural and lining applications Retaining washer |
| BS ISO 8605:2001 | Textile-glass-reinforced plastics. Sheet moulding compound (SMC). Basis for specification |
| 12/30255607 DC : 0 | BS ISO 17855-1 - PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| PREN 15507 : DRAFT 2016 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - COMPARATIVE MATERIAL TESTING OF POLYETHYLENE GRADES |
| BS ISO 14127:2008 | Carbon-fibre-reinforced composites. Determination of the resin, fibre and void contents |
| 15/30315534 DC : 0 | BS EN ISO 16396-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN 15345:2008-02 | Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
| 07/30152076 DC : 0 | BS ISO 25137-2 - PLASTICS - SULFONE PLASTICS (SP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 438-9:2017 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 9: CLASSIFICATION AND SPECIFICATIONS FOR ALTERNATIVE CORE LAMINATES |
| 06/30136260 DC : DRAFT MAR 2006 | ISO 21138-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLCHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1 - MATERIAL AND PERFORMANCE SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS |
| I.S. EN 15502-2-1:2012 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| DIN EN ISO 16396-2:2017-07 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
| EN ISO 15494:2015 | Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015) |
| PREN 13160-7 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| I.S. EN 15345:2007 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
| ISO 20029-2:2017 | Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties |
| I.S. EN 13598-2:2016 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR MANHOLES AND INSPECTION CHAMBERS |
| I.S. EN 438-8:2009 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 8: CLASSIFICATION AND SPECIFICATIONS FOR DESIGN LAMINATES |
| I.S. EN 62333-3:2010 | NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERIZATION OF PARAMETERS OF NOISE SUPPRESSION SHEET |
| I.S. EN 16506:2014 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| ISO 20557-2:2018 | Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties |
| S.R. CEN TS 15534-1:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS |
| I.S. EN ISO 20753:2014 | PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
| I.S. EN ISO 20029-2:2018 | PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES (ISO 20029-2:2017) |
| ISO 15398:2012 | Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas |
| EN 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories |
| SAE J2642_201707 | Recommended Practice for Developing Specifications for Automotive Thermoplastic Materials |
| I.S. EN 50655-1:2017 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
| ISO 7823-2:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets |
| ISO 15877-1:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General |
| EN 13491:2018 | Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures |
| DIN EN ISO 20753:2014-07 | PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
| I.S. EN ISO 11963:2012 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012) |
| I.S. EN ISO 11833-1:2012 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012) |
| BS EN 13476-3 : 2007 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND PROFILED EXTERNAL SURFACE AND THE SYSTEM, TYPE B |
| DIN EN 13341:2011-04 | Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods (includes Amendment A1:2011) |
| DIN EN ISO 15103-2:2007-09 | PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN 12201-1:2011-11 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| BS EN 14471 : 2013 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 23667:2007 | Packaging. Transport packaging for dangerous goods. Rigid plastics and plastics composite IBCs. Compatibility testing |
| BS EN 15347:2007 | Plastics. Recycled Plastics. Characterization of plastics waste |
| BS EN 438-7:2005 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| BS EN ISO 12086-1:2006 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Designation system and basis for specifications |
| BS EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General |
| ISO 15103-2:2007 | Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 16103:2005 | Packaging. Transport packages for dangerous goods. Recycled plastics material |
| BS EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components |
| DIN EN ISO 1872-2:2000-12 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN ISO 7823-1:2003 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS |
| EN 13566-2:2005 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes |
| EN 13575:2012 | Static thermoplastic tanks for the above ground storage of chemicals — Blow moulded or rotationally moulded polyethylene tanks — Requirements and test methods |
| DIN EN ISO 12086-1:2006-05 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| DIN EN 438-8:2009-07 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 8: CLASSIFICATION AND SPECIFICATIONS FOR DESIGN LAMINATES |
| EN 12201-1:2011 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| EN 12080:2017 | Railway applications - Axleboxes - Rolling bearings |
| EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products |
| EN 62333-3:2010 | Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet |
| EN 10245-2:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| EN 50655-1:2017 | Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds |
| EN 12666-1:2005+A1:2011 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system |
| EN 10245-5:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| EN 13341:2005+A1:2011 | Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods |
| DIN EN 13476-2:2007-08 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND EXTERNAL SURFACE AND THE SYSTEM, TYPE A |
| DIN EN 15502-2-1:2017-09 | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW (includes Amendment 1:2016) |
| EN ISO 23667:2007 | Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing (ISO 23667:2007) |
| EN 13160-7:2016 | Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets |
| DIN EN ISO 20568-2:2017-10 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
| EN 61212-2:2006 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test |
| DEFSTAN 80-167/3(2006) : 2006 | ADHESIVE, HOT MELT, FOR PACKAGING PURPOSES |
| DIN EN 13476-3:2015-11 (Draft) | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND PROFILED EXTERNAL SURFACE AND THE SYSTEM, TYPE B |
| 18/30371677 DC : DRAFT MAY 2018 | BS EN 1401-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS |
| EN 438-9:2017 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: Classification and specifications for alternative core laminates |
| DIN EN 10245-5:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| BS EN 438-8:2009 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for design laminates |
| 06/30130313 DC : DRAFT MAR 2006 | ISO 23559 - PLASTICS - FILM AND SHEETING - GUIDE FOR THE TESTING OF THERMOPLASTIC FILMS |
| I.S. EN 4702-03:2017 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING |
| I.S. EN 13492:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| I.S. EN ISO 12086-2:2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS ISO 5834-2:2011 | Implants for surgery. Ultra-high-molecular-weight polyethylene Moulded forms |
| 14/30304058 DC : 0 | BS EN ISO 17855-2 - PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ISO 22621-1:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 1: General |
| BS ISO 25137-2 : 2009 | PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ISO 16616:2015 | Test methods for natural fibre-reinforced plastic composite (NFC) deck boards |
| 16/30338105 DC : 0 | BS EN 16994 - CLAY GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF UNDERGROUND STRUCTURES (OTHER THAN TUNNELS AND ASSOCIATED STRUCTURES) |
| 12/30254135 DC : 0 | BS EN 15651-2 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
| 17/30339710 DC : 0 | BS ISO 21138-3 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: PIPES AND FITTINGS WITH NON-SMOOTH EXTERNAL SURFACE, TYPE B |
| 18/30370230 DC : DRAFT APR 2018 | BS ISO 6721-8 - PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 8: LONGITUDINAL AND SHEAR VIBRATION - WAVE-PROPAGATION METHOD |
| 12/30266170 DC : 0 | BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| 14/30304007 DC : 0 | BS EN 62899-2-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 2-1: CONDUCTIVE MATERIAL INK |
| ISO 11963:2012 | Plastics — Polycarbonate sheets — Types, dimensions and characteristics |
| 16/30338123 DC : 0 | BS EN 16993 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS |
| 11/30237918 DC : 0 | BS EN ISO 13274 - PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS |
| BS EN ISO 20028-2:2017 | Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN 10245-5:2011 | Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire |
| 10/30217319 DC : 0 | BS EN 13598-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS |
| EN 15344:2007 | Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates |
| DIN EN 124-6:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| I.S. EN ISO 19069-2:2016 | PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016) |
| BS EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| 14/30310792 DC : 0 | BS EN 13598-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR MANHOLES AND INSPECTION CHAMBERS IN TRAFFIC AREAS AND DEEP UNDERGROUND INSTALLATIONS |
| 14/30275072 DC : 0 | BS ISO 17902 - WRAPPED ELECTROFOAMING JOINTS FOR PE PIPING SYSTEMS WITH SMOOTH OUTER WALL FOR GRAVITY DRAINS AND SEWERS |
| ISO 18263-2:2015 | Plastics — Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging — Part 2: Preparation of test specimens and determination of properties |
| PREN 438-9 : DRAFT 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 9: CLASSIFICATION AND SPECIFICATIONS FOR ALTERNATIVE CORE LAMINATES |
| 08/30168675 DC : DRAFT JULY 2008 | BS EN ISO 1452-2 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) - PART 2: PIPES |
| PREN 50655-1 : DRAFT 2015 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
| 17/30365113 DC : 0 | BS EN 60455-3-8 ED.2.0 - RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES |
| PREN 1329-1 : DRAFT 2013 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| 05/30131849 DC : DRAFT APR 2005 | ISO 8772 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) |
| 10/30233680 DC : 0 | BS EN 13575 - STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS |
| DIN ISO 16486-1:2015-07 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General (ISO 16486-1:2012 + AMD 1:2014) |
| EN 4702-05:2017 | Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer |
| BS ISO 12891-2:2014 | Retrieval and analysis of surgical implants Analysis of retrieved surgical implants |
| 17/30360679 DC : DRAFT SEP 2017 | BS EN 17152-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND CONVEYANCE AND STORAGE OF NON-POTABLE WATER - BOXES USED FOR INFILTRATION, ATTENUATION AND STORAGE SYSTEMS - PART 1: SPECIFICATIONS FOR STORM WATER BOXES MADE OF PP AND PVC |
| 14/30301266 DC : 0 | BS EN 13160-7 - LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| DIN EN ISO 19069-2:2016-07 | PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016) |
| I.S. EN ISO 13274:2013 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013) |
| I.S. EN ISO 16396-2:2017 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017) |
| 11/30250549 DC : 0 | BS EN 14471 - CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| 15/30304304 DC : 0 | BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| DD CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products |
| PREN 13476-2 : DRAFT 2015 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND EXTERNAL SURFACE AND THE SYSTEM, TYPE A |
| I.S. EN ISO 17304:2013 | DENTISTRY - POLYMERIZATION SHRINKAGE: METHOD FOR DETERMINATION OF POLYMERIZATION SHRINKAGE OF POLYMER-BASED RESTORATIVE MATERIALS (ISO 17304:2013) |
| DIN ISO 5834-2:2014-02 | IMPLANTS FOR SURGERY - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE - PART 2: MOULDED FORMS (ISO 5834-2:2011) |
| I.S. EN ISO 7391-2:2006 | PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| PREN 15860 : DRAFT 2016 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| BS ISO 28078-2:2009 | Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials Preparation of test specimens and determination of properties |
| EN 438-8:2009 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 8: Classification and specifications for design laminates |
| 15/30327636 DC : 0 | BS EN 13476-3 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND PROFILED EXTERNAL SURFACE AND THE SYSTEM, TYPE B |
| I.S. EN ISO 20028-2:2017 | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017) |
| BS EN ISO 20753:2014 | Plastics. Test specimens |
| ISO 21138-3:2007 | Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fittings with non-smooth external surface, Type B |
| I.S. EN 13476-3:2007 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND PROFILED EXTERNAL SURFACE AND THE SYSTEM, TYPE B |
| BS EN 15814 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
| ISO 4586-3:2015 | High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates |
| 15/30319712 DC : 0 | BS EN 1279-4 - GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEAL COMPONENTS AND INSERTS |
| PREN 14471 : DRAFT 2011 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| CEI EN 60455-3-8 : 2014 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES |
| ISO 12891-2:2014 | Retrieval and analysis of surgical implants — Part 2: Analysis of retrieved surgical implants |
| ISO 4437-1:2014 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General |
| I.S. EN 15814:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
| DIN EN ISO 20753 E : 2014 | PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
| I.S. EN ISO 1183-2:2004 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 2: DENSITY GRADIENT COLUMN METHOD |
| ISO 28078-2:2009 | Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| BS EN 16993:2018 | Geosynthetic barriers. Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids |
| PREN 12080 : DRAFT 2015 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| PREN 13362 : DRAFT 2012 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| I.S. EN ISO 20568-2:2017 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
| BS EN 1329-1 : 2014 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN ISO 1874-2:2013-03 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012) |
| DIN EN 13566-2:2006-02 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 2: LINING WITH CONTINUOUS PIPES |
| DIN EN ISO 23667:2007-10 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - RIGID PLASTICS AND PLASTICS COMPOSITE IBCS - COMPATIBILITY TESTING |
| DIN EN 15347:2008-02 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| DIN EN 14427:2014-09 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| DIN EN 12080:2015-06 (Draft) | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| DIN EN 14471:2015-03 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 15344:2008-02 | Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates |
| DIN EN 15342:2008-02 | Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
| ISO 7823-3:2007 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets |
| BS EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers Requirements for adaptors, connectors and flexible couplings |
| BS EN 13566-2:2005 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with continuous pipes |
| BS EN ISO 1874-2:2012 | Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 7823-3:2007 | Plastics. Poly(methacrylate) sheets. Types, dimensions and characteristics Continuous cast sheets |
| BS EN 12080:2017 | Railway applications. Axleboxes. Rolling bearings |
| BS EN 13598-1:2010 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Specifications for ancillary fittings including shallow inspection chambers |
| BS EN 1401-1:2009 | Plastic piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system |
| ISO 19069-2:2016 | Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 1872-2:2007 | Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties |
| I.S. EN 15346:2014 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| I.S. EN 14471:2013 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13160-7:2016 | LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| DIN EN ISO 7391-2:2006-06 | PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 10245-2:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| I.S. EN 61212-2:2006 | INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| I.S. EN 12080:2017 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| DIN EN ISO 11833-1:2012-11 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012) |
| I.S. EN 10245-1:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| I.S. EN ISO 15103-2:2007 | PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 10245-4:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| I.S. EN ISO 2898-2:2008 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN ISO 11963:2012 | Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012) |
| I.S. EN 12201-1:2011 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| I.S. EN 438-3:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 3: CLASSIFICATION AND SPECIFICATIONS FOR LAMINATES LESS THAN 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES |
| I.S. EN 438-4:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 4: CLASSIFICATION AND SPECIFICATIONS FOR COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER |
| I.S. EN 1555-1:2010-2015 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| I.S. EN 1621-2:2014 | MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 2: MOTORCYCLISTS' BACK PROTECTORS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 11963:2013-03 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012) |
| I.S. EN 438-5:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 5: CLASSIFICATION AND SPECIFICATIONS FOR FLOORING GRADE LAMINATES LESS THAN 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES |
| DIN EN ISO 1873-2:2000-12 | PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN 1453-1:2017-09 | PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM |
| I.S. EN ISO 1874-2:2012 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012) |
| I.S. EN 1453-1:2017 | PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1 - SPECIFICATIONS FOR PIPES AND THE SYSTEM |
| I.S. EN 13575:2012 | STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS |
| DIN EN 12080:2017-11 | Railway applications - Axleboxes - Rolling bearings |
| I.S. EN 295-4:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| I.S. EN 14427:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| I.S. EN 12666-1:2006 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| I.S. EN 13341:2005 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
| I.S. EN 438-6:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 6: CLASSIFICATION AND SPECIFICATIONS FOR EXTERIOR-GRADE COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER |
| I.S. EN 15434:2006 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRAVIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| I.S. EN ISO 7823-3:2007 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS |
| NBR ISO 16486-1 : 2013 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL |
| OVE/ONORM EN 60455-3-8 : 2014 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013) |
| DIN EN 15836-1:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| BS EN 62333-3:2010 | Noise suppression sheet for digital devices and equipment Characterization of parameters of noise suppression sheet |
| EN 4691-1:2017 | Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification |
| PREN 1401-1 : DRAFT 2018 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS |
| DIN EN 15502-2-1:2013-01 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| BS EN ISO 1452-4:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U) Valves |
| 16/30338108 DC : DRAFT JULY 2016 | BS EN 13362 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| 10/30212144 DC : 0 | BS EN 12201-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| 14/30303785 DC : 0 | BS EN 438-5 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 5: CLASSIFICATION AND SPECIFICATIONS FOR FLOORING GRADE LAMINATES LESS THAN 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES |
| NF EN ISO 1452-2 : 2010 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: PIPES |
| BS EN 4702-03:2017 | Aerospace series. Quick release fastening systems for non-structural and lining applications Stud - quick-release and locking |
| 15/30325650 DC : 0 | BS EN 50655-1 - ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
| 16/30338117 DC : 0 | BS EN 13493 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| 15/30327856 DC : 0 | BS ISO 20558-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES |
| BS EN ISO 25137-2:2017 | Plastics. Sulfone polymer moulding and extrusion materials Preparation of test specimens and determination of properties |
| 05/30130524 DC : DRAFT MAR 2005 | ISO 22621-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 1: GENERAL |
| 08/30165041 DC : DRAFT FEB 2008 | BS ISO 28078-1 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| 14/30304062 DC : 0 | BS EN ISO 19069-2 - PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 17/30336222 DC : 0 | BS EN 62899-203 - PRINTED ELECTRONICS - PART 203 - MATERIALS - SEMICONDUCTOR INK |
| 11/30236286 DC : 0 | BS EN ISO 11963 - PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
| BS IEC 62899-202:2016 | Printed electronics Materials. Conductive ink |
| BS EN 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation Specifications for individual materials. Sheet 8: Resins for cable accessories |
| 08/30168684 DC : DRAFT JULY 2008 | BS EN ISO 1452-3 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC U) - PART 3: FITTINGS |
| DIN EN ISO 17304:2014-03 | DENTISTRY - POLYMERIZATION SHRINKAGE: METHOD FOR DETERMINATION OF POLYMERIZATION SHRINKAGE OF POLYMER-BASED RESTORATIVE MATERIALS (ISO 17304:2013) |
| 16/30338111 DC : 0 | BS EN 13491 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| 08/30180847 DC : DRAFT JUNE 2008 | BS EN 10245-5 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| I.S. EN ISO 16101:2004 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING |
| 14/30283167 DC : 0 | BS ISO 18263-2 - PLASTICS - MIXTURES OF POLYPROPYLENE (PP) AND POLYETHYLENE (PE) RECYCLATE DERIVED FROM PP AND PE USED FOR FLEXIBLE AND RIGID CONSUMENR PACKAGING - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN 13476-2:2007 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Specifications for pipes and fittings with smooth internal and external surface and the system, Type A |
| 15/30304408 DC : 0 | BS EN ISO 20029-2 - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 14/30303791 DC : 0 | BS EN 438-6 - HIGH-PRESSURE DECORATIVE (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 6: CLASSIFICATION AND SPECIFICATIONS FOR EXTERIOR-GRADE COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER |
| NF EN ISO 1452-4 : 2010 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 4: VALVES |
| BS EN ISO 17855-2:2016 | Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties |
| PREN 16506 : DRAFT 2012 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| PREN 1279-4 : DRAFT 2015 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEAL COMPONENTS AND INSERTS |
| 17/30355239 DC : 0 | BS ISO 4586-4 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 4: CLASSIFICATION AND SPECIFICATIONS FOR COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER |
| DIN EN ISO 13274:2014-06 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013 + COR. 1:2014) |
| 12/30247457 DC : 0 | BS EN ISO 17304 - DENTISTRY - POLYMERISATION SHRINKAGE: METHOD FOR DETERMINATION OF POLYMERISATION SHRINKAGE OF POLYMER-BASED RESTORATIVE MATERIALS |
| BS EN 15345:2007 | Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates |
| BS EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation Methods of test |
| 12/30256736 DC : 0 | BS ISO 4437-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| BS ISO 18263-2:2015 | Plastics. Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Preparation of test specimens and determination of properties |
| BS EN ISO 13274:2013 | Packaging. Transport packaging for dangerous goods. Plastics compatibility testing for packaging and IBCs |
| 15/30328314 DC : 0 | BS EN ISO 20557-2 - PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES |
| 12/30274859 DC : 0 | BS ISO 9523 - TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS |
| 14/30303779 DC : 0 | BS EN 438-4 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 4: CLASSIFICATION AND SPECIFICATIONS FOR COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER |
| PD CEN/TR 15990:2010 | Data sheets. Footwear tests materials and test adhesives |
| PD CEN ISO/TR 22007-5:2014 | Plastics. Determination of thermal conductivity and thermal diffusivity Results of interlaboratory testing of poly(methyl methacrylate) samples |
| DIN EN ISO 1452-2:2010-04 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes (ISO 1452-2:2009) |
| 06/30146370 DC : DRAFT SEP 2006 | ISO 15439-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 4 BAR - POLYAMIDE (PA) - PART 1: GENERAL |
| 12/30265313 DC : 0 | BS EN 124-6 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE FROM POLYPROPYLENE (PP) OR POLYVINYL-CHLORIDE (PVC-U) |
| 12/30263853 DC : 0 | BS EN 4702-03 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - STUD - QUICK-RELEASE AND LOCKING |
| 07/30166095 DC : 0 | EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS |
| CEI EN 62333-3 : 2011 | NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERIZATION OF PARAMETERS OF NOISE SUPPRESSION SHEET |
| 08/30165044 DC : DRAFT FEB 2008 | BS ISO 28078-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| PREN 1453-1 : DRAFT 2014 | PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM |
| EN 4702-03:2017 | Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 03: Stud - quick-release and locking |
| 08/30185977 DC : DRAFT DEC 2008 | BS EN 438-9 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 9: CLASSIFICATION AND SPECIFICATIONS FOR ALTERNATIVE CORE LAMINATES |
| 08/30180838 DC : DRAFT JUNE 2008 | BS EN 10245-2 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| BS ISO 4437-1:2014 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General |
| BS EN 16028:2012 | Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications |
| PD ISO/TR 14569-1:2007 | Dental materials. Guidance on testing of wear Wear by toothbrushing |
| DIN EN ISO 1452-3:2010-04 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings (ISO 1452-3:2009) |
| ISO 20558-2:2018 | Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties |
| ISO/TS 17902:2016 | Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers |
| IEC 62899-202:2016 | Printed electronics - Part 202: Materials - Conductive ink |
| ONORM EN ISO 14910-2 : 2013 | PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013) |
| ISO 12856-1:2014 | Plastics — Plastic railway sleepers for railway applications (railroad ties) — Part 1: Material characteristics |
| I.S. EN 13361:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| I.S. EN 60455-2:2015 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| I.S. EN 15860:2010 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| BS EN 15502-2-1 : 2012 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| I.S. EN ISO 17855-2:2016 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016) |
| EN ISO 1183-2:2004 | Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004) |
| I.S. EN 124-6:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| I.S. EN 13491:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| EN 13476-3:2018 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B |
| I.S. EN ISO 1452-2:2009 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: PIPES |
| I.S. EN ISO 1452-3:2010 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 3: FITTINGS |
| DIN EN ISO 15877-1:2011-03 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2009 + AMD 1:2010) |
| ISO 11833-1:2012 | Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm |
| I.S. EN 15836-1:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| EN 13493:2018 | Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites |
| PREN 13476-3 : DRAFT 2015 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND PROFILED EXTERNAL SURFACE AND THE SYSTEM, TYPE B |
| ASTM D 6339 : 2011 | Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS) |
| EN ISO 7391-2:2006 | Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006) |
| EN ISO 20029-2:2018 | Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017) |
| ISO 8605:2001 | Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification |
| I.S. EN ISO 8986-2:2009 | PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN 1555-1:2010-12 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| DIN EN 1453-1:2000-03 | PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM |
| DIN EN ISO 16101:2004-12 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING |
| DIN EN 295-4:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| DIN EN 438-7:2005-04 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005 |
| DIN EN 438-4:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 4: CLASSIFICATION AND SPECIFICATIONS FOR COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER |
| DIN EN 438-3:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 3: CLASSIFICATION AND SPECIFICATIONS FOR LAMINATES LESS THAT 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES |
| DIN EN 438-5:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 5: CLASSIFICATION AND SPECIFICATIONS FOR FLOORING GRADE LAMINATES LESS THAN 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES |
| DIN EN 12666-1:2011-11 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system (includes Amendment A1:2011) |
| DIN EN 15346:2015-01 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| BS EN ISO 12086-2:2006 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties |
| ISO 13274:2013 | Packaging — Transport packaging for dangerous goods — Plastics compatibility testing for packaging and IBCs |
| BS EN 12201-1:2011 | Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) General |
| BS EN 10329 : 2005 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| ISO 17855-2:2016 | Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| 12/30260914 DC | BS EN 4718. Aerospace series. Polyetherketone with 55 % continuous glass fibre by volume (PEEK-GF55) |
| ISO 2898-2:2008 | Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| EN 13476-2:2018+A1:2020 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A |
| I.S. EN 13598-1:2010 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS |
| EN 60674-2:2017/AC:2018-01 | SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST (IEC 60674-2:2016/COR1:2017) |
| EN 16506:2014 | Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
| EN ISO 9988-2:2015 | Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006) |
| EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| ONORM EN 16028 : 2013 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| BS EN ISO 20029-2:2018 | Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties |
| DIN EN ISO 1452-4:2010-04 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves (ISO 1452-4:2009) |
| 13/30212494 DC : 0 | BS EN ISO 15494 - PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES |
| DIN EN 15542:2008-06 | Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods |
| I.S. EN ISO 23667:2007 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - RIGID PLASTICS AND PLASTICS COMPOSITE IBCS - COMPATIBILITY TESTING |
| BS ISO 16616:2015 | Test methods for natural fibre-reinforced plastic composite (NFC) deck boards |
| 12/30254141 DC : 0 | BS EN 15651-4 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| 11/30248330 DC : 0 | BS ISO 17467-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 1: GENERAL |
| 11/30245512 DC : 0 | BS ISO 15398 - SPECIFICATIONS FOR THERMOPLASTICS COVERS AND FRAMES FOR MANHOLES AND INSPECTION CHAMBERS USED IN NON-TRAFFIC AREAS |
| I.S. EN 13362:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| BS ISO 17467-1:2012 | Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement General |
| BS EN 15836-1:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| I.S. EN 1329-1:2014 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| I.S. EN ISO 1873-2:2007 | PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 06/30151164 DC : 0 | BS EN ISO 15877-1 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL |
| PREN ISO 15494 : DRAFT 2013 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO/DIS 15494:2013) |
| ISO 8772:2006 | Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE) |
| I.S. EN ISO 1872-2:2007 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| PREN 15651-4 : DRAFT 2012 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| BS ISO 15398:2012 | Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas |
| ONORM EN ISO 11833-1 : 2012 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012) |
| BS EN 438-9:2017 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for alternative core laminates |
| ASTM D 5927 : 2017 : REDLINE | Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods |
| ISO 5834-2:2011 | Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 2: Moulded forms |
| 15/30321226 DC : 0 | BS EN ISO 20568-2 - PLASTICS - FLUOROPOLYMER DISPERSION AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 17/30355242 DC : 0 | BS ISO 4586-5 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 5: CLASSIFICATION AND SPECIFICATIONS FOR FLOORING GRADE LAMINATES LESS THAN 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES |
| 16/30317348 DC : 0 | BS EN 15860 - PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| ISO 28278-1:2011 | Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing |
| I.S. EN ISO 9988-2:2015 | PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006) |
| DIN EN 16028:2012-10 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| 05/30128281 DC : DRAFT JAN 2005 | ISO 9988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| PREN 13598-2 : DRAFT 2014 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR MANHOLES AND INSPECTION CHAMBERS IN TRAFFIC AREAS AND DEEP UNDERGROUND INSTALLATIONS |
| DIN EN ISO 9988-2:2015-05 | PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006) |
| 08/30180844 DC : DRAFT JUNE 2008 | BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| I.S. EN 60455-3-8:2013 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013 (EQV)) |
| ISO 16486-1:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General |
| DIN EN 15814:2015-03 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
| 12/30254132 DC : 0 | BS EN 15651-1 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS |
| PREN 13493 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| PREN 13492 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| DD CEN/TS 15534-2:2007 | Wood-plastics composites (WPC) Characterisation of WPC materials |
| I.S. EN ISO 14910-2:2013 | PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013, CORRECTED VERSION 2015-12-15) |
| 17/30354769 DC : 0 | BS EN ISO 29988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 12/30242496 DC : DRAFT MAR 2012 | BS ISO 16525-1 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 1: GENERAL TEST METHODS |
| 17/30360581 DC : 0 | BS ISO 5834-2 - IMPLANTS FOR SURGERY - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE - PART 2: MOULDED FORMS |
| 13/30242622 DC : 0 | BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
| 14/30283170 DC : 0 | BS ISO 18263-1 - PLASTICS - MIXTURES OF POLYPROPYLENE (PP) AND POLYETHYLENE (PE) RECYCLATE DERIVED FROM PP AND PE USED FOR FLEXIBLE AND RIGID CONSUMER PACKAGING - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATION |
| ISO 1183-2:2004 | Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method |
| 08/30181778 DC : DRAFT JULY 2008 | BS EN 15836-1 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| 03/118818 DC : DRAFT DEC 2003 | BS EN ISO 7391-2 - PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN ISO 19069-2:2016 | Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN 15542:2008 | Ductile iron pipes, fittings and accessories. External cement mortar coating for pipes. Requirements and test methods |
| I.S. EN 4702-05:2017 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 05: RETAINING WASHER |
| ISO 1452-2:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes |
| PREN 15651-2 : DRAFT 2012 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
| 17/30355245 DC : 0 | BS ISO 4586-6 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 6: CLASSIFICATION AND SPECIFICATIONS FOR EXTERIOR-GRADE COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER |
| BS EN 15507:2017 | Packaging. Transport packaging for dangerous goods. Comparative material testing of polyethylene grades |
| BS EN 50655-1:2017 | Electric cables. Accessories. Material characterization Fingerprinting for resinous compounds |
| I.S. EN 16994:2018 | CLAY GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF UNDERGROUND STRUCTURES (OTHER THAN TUNNELS AND ASSOCIATED STRUCTURES) |
| I.S. EN ISO 23936-1:2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
| DIN EN ISO 1183-2:2004-10 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 2: DENSITY GRADIENT COLUMN METHOD |
| BS EN ISO 1183-2:2004 | Plastics. Methods for determining the density of non-cellular plastics Density gradient column method |
| EN 13361:2018 | Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams |
| DIN EN ISO 20028-2:2015-08 (Draft) | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017) |
| ISO 14127:2008 | Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents |
| BS EN ISO 15877-1 : 2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL |
| PREN ISO 11833-1 : DRAFT 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM |
| PREN 438-5 : DRAFT 2014 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 5: CLASSIFICATION AND SPECIFICATIONS FOR FLOORING GRADE LAMINATES LESS THAN 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES |
| EN 15507:2017 | Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades |
| DIN EN ISO 15494:2016-03 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015) |
| EN 13362:2018 | Geosynthetic Barriers - Characteristics required for use in the construction of canals |
| EN ISO 20753:2014 | Plastics - Test specimens (ISO 20753:2008) |
| EN 15382:2018 | Geosynthetic barriers - Characteristics required for use in transportation infrastructure |
| ISO 4586-6:2015 | High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater |
| ISO 21138-1:2007 | Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material specifications and performance criteria for pipes, fittings and system |
| EN 13492:2018 | Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
| ISO 13272:2011 | Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations |
| ISO 7628:2010 | Road vehicles — Thermoplastics tubing for air braking systems |
| ISO 4586-4:2015 | High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater |
| ISO 1452-4:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 4: Valves |
| S.R. CEN TS 15534-2:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 2: CHARACTERISATION OF WPC MATERIALS |
| I.S. EN 13493:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| ISO 4586-8:2015 | High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 8: Classification and specifications for alternative core laminates |
| I.S. EN 15382:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| ISO 4586-7:2015 | High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Classification and specifications for design laminates |
| DIN EN 13476-2:2015-11 (Draft) | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND EXTERNAL SURFACE AND THE SYSTEM, TYPE A |
| S.R. CEN TR 15990:2010 | DATA SHEETS - FOOTWEAR TESTS MATERIALS AND TEST ADHESIVES |
| I.S. EN 15542:2008 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 7823-1:2003-12 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS |
| DIN EN ISO 7823-3:2007-08 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) |
| DIN EN ISO 16103:2005-09 | Packaging - Transport packaging for dangerous goods - Recycled plastics material (ISO 16103:2005) |
| DIN EN 438-6:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 6: CLASSIFICATION AND SPECIFICATIONS FOR EXTERIOR-GRADE COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER |
| DIN EN ISO 7823-2:2003-12 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS |
| DIN EN 10245-4:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011 |
| BS EN ISO 16101:2004 | Packaging. Transport packaging for dangerous goods. Plastics compatibility testing |
| BS EN 1453-1:2000 | Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly (vinyl chloride) (PVC-U) Specifications for pipes and the system |
| 11/30242263 DC : 0 | BS EN 4691-001 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - TECHNICAL SPECIFICATION |
| BS EN ISO 1873-2:2007 | Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties |
| ISO 1873-2:2007 | Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| ISO 23667:2007 | Packaging — Transport packaging for dangerous goods — Rigid plastics and plastics composite IBCs — Compatibility testing |
| BS EN 438-6:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater |
| ISO 20028-2:2017 | Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| BS EN 13160-7:2003 | Leak detection systems General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets |
| BS EN 438-4:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for compact laminates of thickness 2 mm and greater |
| EN 13598-2:2016 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers |
| ISO 1874-2:2012 | Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| IEC 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| BS EN 15434 : 2006 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| BS EN 14427:2014 | LPG equipment and accessories. Transportable refillable fully wrapped composite cylinders for LPG. Design and construction |
| DIN EN 13598-1:2011-02 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS |
| BS EN 13575:2012 | Static thermoplastic tanks for the above ground storage of chemicals. Blow moulded or rotationally moulded polyethylene tanks. Requirements and test methods |
| ISO 20568-2:2017 | Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 7823-2:2003 | Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets |
| ISO 16101:2004 | Packaging — Transport packaging for dangerous goods — Plastics compatibility testing |
| IEC 61212-2:2006 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test |
| ISO/TR 22007-5:2011 | Plastics — Determination of thermal conductivity and thermal diffusivity — Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples |
| ISO 12086-2:2006 | Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| BS EN 12666-1 : 2005 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN 15434:2010-07 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) (includes Amendment A1:2010) |
| ISO 7823-1:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets |
| ISO 7792-2:2012 | Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 7823-1:2003 | Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Cast sheets |
| ISO 16396-2:2017 | Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| BS EN 10245-4:2011 | Steel wire and wire products. Organic coatings on steel wire Polyester coated wire |
| BS EN ISO 11833-1:2012 | Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics Sheets of thickness not less than 1 mm |
| IEC 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories |
| BS EN 10245-1:2011 | Steel wire and wire products. Organic coatings on steel wire General rules |
| ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics |
| ISO 25137-2:2009 | Plastics — Sulfone polymer moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| ISO 8986-2:2009 | Plastics — Polybutene-1 (PB-1) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| ISO 12086-1:2006 | Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 1: Designation system and basis for specifications |
| ISO 9988-2:2006 | Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| EN 13598-1:2010 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers |
| IEC 62333-3:2010 | Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet |
| ISO 17304:2013 | Dentistry — Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials |
| BS EN 15342:2007 | Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates |
| 12/30260913 DC | BS EN 4717. Aerospace series. Polyetherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) |
| BS EN 13341 : 2005 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
| BS EN 438-3:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
| BS EN 4691-1:2017 | Aerospace series. Tie rod with integrated bolts Technical specification |
| DIN EN 10245-1:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| EN 15342:2007 | Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
| EN ISO 17855-1:2014 | Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 17855-1:2014) |
| EN ISO 2898-2:2008 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008) |
| EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
| EN 438-5:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates |
| EN 14427:2014 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| EN ISO 8986-2:2009 | Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009) |
| EN ISO 19069-2:2016 | Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016) |
| EN 14471:2013+A1:2015 | Chimneys - System chimneys with plastic flue liners - Requirements and test methods |
| EN ISO 1873-2:2007 | Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007) |
| EN 438-6:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater |
| EN ISO 1874-2:2012 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012) |
| EN 15347:2007 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| EN 15434:2006+A1:2010 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
| EN 438-4:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater |
| EN 16028:2012 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| EN 15814:2011+A2:2014 | Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
| EN ISO 10350-1:2017 | Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017) |
| EN ISO 16103:2005 | Packaging - Transport packages for dangerous goods - Recycled plastics material (ISO 16103:2005) |
| EN 1401-1:2009 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| EN ISO 16396-2:2017 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
| EN 15345:2007 | Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
| EN 15502-2-1:2012+A1:2016 | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW |
| EN ISO 7823-1:2003 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003) |
| EN ISO 20028-2:2017 | Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017) |
| EN ISO 20568-2:2017 | Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017) |
| EN 438-7:2005 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| EN ISO 17855-2:2016 | Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016) |
| EN ISO 1872-2:2007 | Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007) |
| EN ISO 15103-2:2007 | Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007) |
| EN 16993:2018 | Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids |
| EN ISO 14910-2:2013 | Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15) |
| EN 1621-2:2014 | Motorcyclists' protective clothing against mechanical impact - Part 2: Motorcyclists' back protectors - Requirements and test methods |
| EN ISO 1452-4:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves (ISO 1452-4:2009) |
| EN ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009) |
| EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
| EN 15542:2008 | Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods |
| EN ISO 11833-1:2012 | Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012) |
| EN 10245-4:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| EN ISO 7823-2:2003 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003) |
| EN ISO 1452-3:2010 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings (ISO 1452-3:2009, corrected version 2010-03-01) |
| EN ISO 17304:2013 | Dentistry - Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials (ISO 17304:2013) |
| EN ISO 7792-2:2012 | Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012) |
| EN ISO 1452-2:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes (ISO 1452-2:2009) |
| EN 15346:2014 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| EN 438-3:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
| EN ISO 25137-2:2017 | Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009) |
| 12/30263857 DC : 0 | BS EN 4702-05 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - WASHER |
| PREN 438-4 : DRAFT 2014 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 4: CLASSIFICATION AND SPECIFICATIONS FOR COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER |
| 13/30238193 DC : DRAFT DEC 2013 | BS ISO 16616 - TEST METHODS FOR NATURAL FIBER-REINFORCED PLASTIC COMPOSITE (NFC) DECK BOARDS |
| ISO 23559:2007 | Plastics — Film and sheeting — Guidance on the testing of thermoplastic films |
| ISO 20753:2008 | Plastics — Test specimens |
| ISO 17467-1:2012 | Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems jointed by solvent cement — Part 1: General |
| DIN EN ISO 17855-2:2016-06 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016) |
| 12/30275810 DC : 0 | BS EN 16506 - SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| BS EN ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries. Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics |
| DIN EN 13598-2:2016-09 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR MANHOLES AND INSPECTION CHAMBERS |
| PREN 15651-1 : DRAFT 2012 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS |
| I.S. EN 438-7:2005 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| 06/30136263 DC : DRAFT MAR 2006 | ISO 21138-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLCHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2 - PIPES AND FITTINGS WITH SMOOTH EXTERNAL SURFACE - TYPE A |
| 10/30228627 DC : 0 | BS EN ISO 1452-3 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 3: FITTINGS |
| BS EN ISO 17855-1:2014 | Plastics. Polyethylene (PE) moulding and extrusion materials Designation system and basis for specifications |
| I.S. EN 15534-1:2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| I.S. EN 16993:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS |
| 13/30276234 DC : 0 | BS EN 15346 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| 06/30130317 DC : DRAFT JULY 2006 | ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY (VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
| EN 16994:2018 | Clay Geosynthetic Barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures) |
| 08/30180835 DC : DRAFT JUNE 2008 | BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| PREN 438-8 : DRAFT 2017 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 8: CLASSIFICATION AND SPECIFICATIONS FOR DESIGN LAMINATES |
| BS ISO 7628:2010 | Road vehicles. Thermoplastics tubing for air braking systems |
| BS EN 15534-1 : 2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| ISO 21138-2:2007 | Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fittings with smooth external surface, Type A |
| 08/30172148 DC : DRAFT MAY 2008 | BS ISO 28278-1 - GLASS IN BUILDING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING - PART 1: SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING |
| 16/30340635 DC : 0 | BS EN 438-9 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 9: CLASSIFICATION AND SPECIFICATIONS FOR ALTERNATIVE CORE LAMINATES |
| BS EN ISO 17304:2013 | Dentistry. Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials |
| BS ISO 9988-2 : 2006 | PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN ISO 25137-2:2017 | PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009) |
| NF EN ISO 1452-3 : DEC 2010 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 3: FITTINGS |
| 12/30254138 DC : 0 | BS EN 15651-3 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
| 15/30314236 DC : 0 | BS ISO 15676 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO) |
| I.S. EN 15344:2007 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES |
| BS EN ISO 15494:2015 | Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP). Metric series for specifications for components and the system |
| BS EN ISO 1452-3:2010 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U) Fittings |
| 07/30150249 DC : 0 | BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
| BS EN ISO 20568-2:2017 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties |
| 16/30338120 DC : 0 | BS EN 15382 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| BS EN 15860:2010 | Plastics. Thermoplastic semi-finished products for machining. Requirements and test methods |
| 15/30304402 DC : 0 | BS EN ISO 20028-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| PREN 438-6 : DRAFT 2014 | HIGH-PRESSURE DECORATIVE (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 6: CLASSIFICATION AND SPECIFICATIONS FOR EXTERIOR-GRADE COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER |
| I.S. EN ISO 17855-1:2014 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 17855-1:2014) |
| PREN 15346 : DRAFT 2013 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| EN 1329-1:2014+A1:2018 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the systems |
| EN ISO 7823-3:2007 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) |
| I.S. EN ISO 15494:2015 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015) |
| ISO 14910-2:2013 | Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties |
| 16/30338126 DC : 0 | BS EN 13492 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| 07/30163692 DC : 0 | BS EN 15651-3 - SEALANTS FOR JOINTS IN BUILDING CONSTRUCTION - DEFINITIONS, REQUIREMENTS AND EVALUATION OF CONFORMITY - PART 3: SEALANTS FOR SANITARY JOINTS |
| ISO 15494:2015 | Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system |
| I.S. EN 15507:2017 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - COMPARATIVE MATERIAL TESTING OF POLYETHYLENE GRADES |
| BS EN ISO 9988-2:2015 | Plastics. Polyoxymethylene (POM) moulding and extrusion materials Preparation of test specimens and determination of properties |
| PREN ISO 11963 : DRAFT 2011 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
| I.S. EN 4691-1:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| ISO/TS 18226:2006 | Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) |
| I.S. EN 10245-5:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| I.S. EN 16028:2012 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| 15/30327639 DC : 0 | BS EN 13476-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND EXTERNAL SURFACE AND THE SYSTEM, TYPE A |
| ISO 1452-3:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 3: Fittings |
| BS EN 13598-2:2009 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Specifications for manholes and inspection chambers in traffic areas and deep underground installations |
| DIN EN ISO 25137-2:2016-08 (Draft) | PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009) |
| DIN EN 15860:2016-07 (Draft) | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 20568-2:2015-07 (Draft) | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
| ISO 8180:2006 | Ductile iron pipelines — Polyethylene sleeving for site application |
| I.S. EN 13476-2:2007 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY (VINYLCHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INTERNAL AND EXTERNAL SURFACE AND THE SYSTEM, TYPE A |
| BS EN 13362:2018 | Geosynthetic Barriers. Characteristics required for use in the construction of canals |
| BS EN ISO 10350-1:2017 | Plastics. Acquisition and presentation of comparable single-point data Moulding materials |
| EN 13476-2:2018 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A |
| I.S. EN ISO 1452-4:2009 | LASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 4: VALVES |
| PREN 15651-3 : DRAFT 2012 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
| I.S. EN ISO 15877-1:2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL |
| ISO/TR 14569-1:2007 | Dental materials — Guidance on testing of wear — Part 1: Wear by toothbrushing |
| ISO 7391-2:2006 | Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| EN 15860:2010 | Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods |
| ISO 15439-1:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) — Polyamide (PA) — Part 1: General |
| ISO 4586-5:2015 | High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates |
| ISO 16525-1:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 1: General test methods |
| DIN EN 1621-2:2014-05 | MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 2: MOTORCYCLISTS' BACK PROTECTORS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13575:2012-06 | Static thermoplastic tanks for the above ground storage of chemicals - Blow moulded or rotationally moulded polyethylene tanks - Requirements and test methods |
| DIN EN 1401-1:2009-07 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN ISO 7792-2:2013-03 | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012) |
| BS EN ISO 8986-2:2009 | Plastics. Polybutene-1 (PB-1) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 15103-2:2007 | Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials Preparation of test specimens and determination of properties |
| I.S. EN 1401-1:2009 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| BS EN ISO 2898-2:2008 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Preparation of test specimens and determination of properties (ISO 2898-2:2008) |
| ISO 16103:2005 | Packaging — Transport packaging for dangerous goods — Recycled plastics material |
| BS EN ISO 14910-2:2013 | Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties |
| ISO 1872-2:2007 | Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| BS EN 1825-1:2004 | Grease separators Principles of design, performance and testing, marking and quality control |
| ISO 17855-1:2014 | Plastics — Polyethylene (PE) moulding and extrusion materials — Part 1: Designation system and basis for specifications |
| BS EN ISO 11963:2012 | Plastics. Polycarbonate sheets. Types, dimensions and characteristics |
| BS EN 10245-2:2011 | Steel wire and wire products. Organic coatings on steel wire PVC finished wire |
| BS EN 438-5:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates |
| BS EN ISO 7391-2:2006 | Plastics. Polycarbonate (PC) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 7792-2:2012 | Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN 15346:2014 | Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates |
| BS EN 15344:2007 | Plastics. Recycled plastics. Characterization of polyethylene (PE) recyclates |
| BS EN 61212-2:2006 | Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Methods of test |
| BS EN 1621-2:2003 | Motorcyclists\' protective clothing against mechanical impact Motorcyclists back protectors. Requirements and test methods |
| DIN EN ISO 2898-2:2009-03 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| CEN ISO/TR 22007-5:2014 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011) |
| EN ISO 16101:2004 | Packaging - Transport packaging for dangerous goods - Plastics compatibility testing (ISO 16101:2004) |
| DIN EN ISO 12086-2:2006-05 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN 10245-2:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire; German version EN 10245-2:2011 |
| DIN EN ISO 14910-2:2013-06 | PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013) |
| EN 10329:2006 | Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
| DIN EN 14879-5:2007-10 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
| DIN EN 10329:2006-04 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| DIN EN ISO 8986-2:2010-04 | PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN 1825-1:2004-12 | Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004 |
| CEN/TS 15534-2:2007 | Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials |
| EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| UNE-EN ISO 1452-3:2011 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings (ISO 1452-3:2009, corrected version 2010-03-01) |
| I.S. EN 1825-1:2004 | GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
| UNE-EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| UNE-EN 10245-5:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| UNE-EN ISO 15494:2016 | Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015) |
| UNE-EN 16028:2013 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| UNE-EN 1621-2:2014 | Motorcyclists' protective clothing against mechanical impact - Part 2: Motorcyclists' back protectors - Requirements and test methods |
| UNE-EN 12201-1:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| UNE-EN 15434:2007 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
| UNE-EN 16506:2015 | Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
| UNE-EN ISO 17855-2:2016 | Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016) |
| UNE-EN 12666-1:2006 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system |
| UNE-EN 10245-4:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| UNE-EN ISO 17855-1:2015 | Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 17855-1:2014) |
| UNE-EN 438-5:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates |
| UNE-EN ISO 16396-2:2017 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
| UNE-EN ISO 9988-2:2015 | Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006) |
| UNE-EN 13598-2:2017 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers |
| UNE-EN ISO 25137-2:2017 | Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009) |
| UNE-EN 13575:2012 | Static thermoplastic tanks for the above ground storage of chemicals — Blow moulded or rotationally moulded polyethylene tanks — Requirements and test methods |
| UNE-EN 10245-1:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| UNE-EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| UNE-EN 13160-7:2017 | Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets |
| UNE-EN ISO 13274:2014 | Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs (ISO 13274:2013) |
| UNE-EN ISO 20028-2:2017 | Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017) |
| UNE-EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
| UNE-EN ISO 20568-2:2017 | Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017) |
| UNE-EN 10245-2:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| UNE-EN ISO 19069-2:2016 | Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016) |
| UNE-EN 1555-1:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| I.S. EN 15342:2007 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES |
| UNE-EN 15860:2011 | Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods |
| UNE-EN ISO 11963:2013 | Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012) |
| UNE-EN 1453-1:2017 | Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system |
| UNE-EN ISO 11833-1:2012 | Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012) |
| UNE-EN 15346:2015 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| UNE-EN ISO 1874-2:2013 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012) |
| UNE-EN 15507:2018 | Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades |
| UNE-EN 15814:2011 | Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
| UNE-EN 438-3:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
| UNE-EN 438-4:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater |
| UNE-EN ISO 14910-2:2014 | Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15) |
| UNE-EN ISO 20753:2015 | Plastics - Test specimens (ISO 20753:2008) |
| NBR 15891-1 : 2013 | IMPLANTS FOR SURGERY - ABSORBABLE RESINS - PART 1: SPECIFICATION FOR SEMICRYSTALLINE POLY(LACTIDE) POLYMER AND COPOLYMER RESINS |
| NBR 15891-3 : 2013 | IMPLANTS FOR SURGERY - ABSORBABLE RESINS - PART 3: SPECIFICATION FOR POLY(LACTIDE) AND POLY(LACTID-CO-GLYCOLIDE) VIRGIN AMORPHOUS RESINS |
| UNE-EN 13598-1:2011 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers |
| UNE-EN ISO 7792-2:2013 | Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012) |
| NBR 15891-2 : 2013 | IMPLANTS FOR SURGERY - BIOABSORBABLE RESINS - PART 2: SPECIFICATION FOR POLY(GLYCOLIDE) AND POLY(GLYCOLIDE-CO-LACTIDE) VIRGIN RESINS WITH MOLE FRACTIONS GREATER THAN OR EQUAL TO 70% GLYCOLIDE |
| UNE-EN 438-6:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 6: Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater |
| UNE-EN 14427:2014 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| NBR 15593 : 2008 | PRESSURIZED BURIED SYSTEMS FOR WATER DISTRIBUTION AND SEWER - REQUIREMENTS FOR FUSION WELDED POLYETHYLENE FITTINGS PE 80 AND PE 100 |
| NBR 15561 : 2016 AMD 1 2017 | POLYETHYLENE PIPE PE 80 AND PE 100 FOR WATER TRANSPORT AND SEWAGE UNDER PRESSURE - REQUIREMENTS |
| ISO 80000-4:2006 | Quantities and units — Part 4: Mechanics |
| ISO 472:2013 | Plastics — Vocabulary |
| ISO 291:2008 | Plastics — Standard atmospheres for conditioning and testing |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.