ISO 12103-1:2016
Withdrawn
Withdrawn
View Superseded by
Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
03-08-2016
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO 12103-1:2016 defines particle size distribution and chemical content limits involving four grades of test dust made from Arizona desert sand.
| Committee |
ISO/TC 22/SC 34
|
| DevelopmentNote |
Supersedes ISO/DIS 12103-1. (03/2016)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| JIS R 3212:2021 | Identical |
| BS ISO 12103-1:2016 | Identical |
| SS-ISO 12103-1 : 2016 | Identical |
| BS ISO 17268 : 2012 | GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES |
| EN 62817:2015/A1:2017 | PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION OF SOLAR TRACKERS (IEC 62817:2014/A1:2017) |
| CEN/TR 16013-3:2012 | Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers |
| BS 7403-12:2000 | Full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting, and contaminant retention capacity |
| DIN EN ISO 17268:2016-02 (Draft) | GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES (ISO 17268:2012) |
| BS ISO 10263-2:2009 | Earth-moving machinery. Operator enclosure environment Air filter element test method |
| BIS IS 8384 : 2013 | HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING |
| MIL-DTL-8815-31 Base Document:2009 | Filter Elements, Non-Cleanable, Fluid Pressure, Hydraulic Line, 3,000 PSI, 5 Micron Absolute, -65 Degrees F to 275 Degrees F |
| 05/30098238 DC : 0 | ISO 21081-2 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 2: FILTER BLOCKAGE TECHNIQUE |
| SAE ARP725A | Evaluating Effectiveness of Filter Element Cleaning Methods |
| 07/30167778 DC : 0 | BS ISO 11155-2 - ROAD VEHICLES - AIR FILTERS FOR PASSENGER COMPARTMENTS - PART 2: TEST FOR GASEOUS FILTRATION |
| 07/19969755 DC : 0 | BS ISO 11500 - HYDRAULIC FLUID POWER - DETERMINATION OF PARTICULATE CONTAMINATION LEVEL OF A LIQUID SAMPLE BY AUTOMATIC PARTICLE COUNTING USING THE LIGHT EXTINCTION PRINCIPLE |
| BS ISO 14085-3:2015 | Aerospace series. Hydraulic filter elements. Test methods Filtration efficiency and retention capacity |
| BS 7403-11:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for self-cleaning filters |
| 13/30271038 DC : 0 | BS ISO 14085-4 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 4: VERIFICATION OF COLLAPSE/BURST PRESSURE RATING |
| BS ISO 19438:2003 | Diesel fuel and petrol filters for internal combustion engines. Filtration efficiency using particle counting and contaminant retention capacity |
| 09/30171027 DC : 0 | BS ISO 11171 - HYDRAULIC FLUID POWER - CALIBRATION OF AUTOMATIC PARTICLE COUNTERS FOR LIQUIDS |
| EI 1570 : 2012 | HANDBOOK ON ELECTRONIC SENSORS FOR THE DETECTION OF PARTICULATE MATTER AND/OR FREE WATER DURING AIRCRAFT REFUELLING |
| MIL-PRF-32098 Revision A:2004 | Ultrafiltration System, 10-Gallon Per Minute Oily Waste Membrane (OWMS-10) |
| ISO 17536-1:2015 | Road vehicles — Aerosol separator performance test for internal combustion engines — Part 1: General |
| NSF 62 : 2017 | DRINKING WATER DISTILLATION SYSTEMS |
| SAE J2321/1_201305 | Disposable Hydraulic Filter Element - 115 L/min Flow, 1.0 MPa Collapse Pressure, Filtration Ratio = 75 at 6 and 10 μm |
| ISO 21018-3:2008 | Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 3: Use of the filter blockage technique |
| ISO 4548-12:2017 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting and contaminant retention capacity |
| SAE J931_201208 | Hydraulic Fluid Power Circuit Filtration - Application & Methods |
| EI 1550 : 2014 | HANDBOOK ON EQUIPMENT USED FOR THE MAINTENANCE AND DELIVERY OF CLEAN AVIATION FUEL |
| SAE AS39901B | Bearings, Roller, Needle, Airframe, Antifriction, Inch |
| SAE J1985_201310 | Fuel Filter - Initial Single-Pass Efficiency Test Method |
| BS EN ISO 16890-2:2016 | Air filters for general ventilation Measurement of fractional efficiency and air flow resistance |
| 15/30278074 DC : 0 | BS EN ISO 16890-3 - AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED |
| BS EN ISO 16890-3:2016 | Air filters for general ventilation Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured |
| I.S. EN 13443-2:2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 2: PARTICLE RATING 1 [MU]M TO LESS THAN 80 [MU]M - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| EN 13443-2:2005+A1:2007 | Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing |
| DIN EN ISO 17268:2017-03 | Gaseous hydrogen land vehicle refuelling connection devices (ISO 17268:2012) |
| 14/30294816 DC : 0 | BS EN 16713-1 - DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 16890-3:2016 | AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016) |
| ISO/TS 13353:2002 | Diesel fuel and petrol filters for internal combustion engines — Initial efficiency by particule counting |
| BS 7403-4:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method) |
| BS ISO 14085-4:2015 | Aerospace series. Hydraulic filter elements. Test methods Verification of collapse/burst pressure rating |
| I.S. EN ISO 16890-2:2016 | AIR FILTERS FOR GENERAL VENTILATION - PART 2: MEASUREMENT OF FRACTIONAL EFFICIENCY AND AIR FLOW RESISTANCE (ISO 16890-2:2016) |
| SAE AIR4543/1A | Aerospace Hydraulics and Actuation Lessons Learned |
| I.S. EN 779:2012 | PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
| BS ISO 21018-1:2008 | Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid General principles |
| 09/30205415 DC : 0 | BS EN 60312-1 ED 1.0 - VACUUM CLEANERS FOR HOUSEHOLD USE - PART 1: DRY VACUUM - METHODS FOR MEASURING PERFORMANCE |
| NFX 45 308 : 2000 | FILTER CARTRIDGES - TEST METHODS - VERIFICATION OF RESISTANCE TO HIGH TEMPERATURES |
| BS ISO 11171:2016 | Hydraulic fluid power. Calibration of automatic particle counters for liquids |
| BS ISO 20653:2013 | Road vehicles. Degrees of protection (IP code). Protection of electrical equipment against foreign objects, water and access |
| S.R. CEN/TR 16013-3:2012 | WORKPLACE EXPOSURE - GUIDE FOR THE USE OF DIRECT-READING INSTRUMENTS FOR AEROSOL MONITORING - PART 3: EVALUATION OF AIRBORNE PARTICLE CONCENTRATIONS USING PHOTOMETERS |
| BS ISO 2941:2009 | Hydraulic fluid power. Filter elements. Verification of collapse/burst pressure rating |
| BS ISO 11155-2:2009 | Road vehicles. Air filters for passenger compartments Test for gaseous filtration |
| 11/30240691 DC : 0 | BS ISO 20653 - ROAD VEHICLES - DEGREES OF PROTECTION (IP-CODE) - PROTECTION OF ELECTRICAL EQUIPMENT AGAINST FOREIGN OBJECTS, WATER AND ACCESS |
| 15/30329404 DC : 0 | BS EN 15695-2 - AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 2: FILTERS, REQUIREMENTS AND TEST PROCEDURES |
| PD CEN/TR 16013-3:2012 | Workplace exposure. Guide for the use of direct-reading instruments for aerosol monitoring Evaluation of airborne particle concentrations using photometers |
| MIL-PRF-32097 Revision A:2005 | Filtration Module, Oily Waste Membrane Type |
| MIL-DTL-8815-32 Base Document:2010 | Filter Elements, Non-Cleanable, Fluid Pressure, Hydraulic Line, 3000 PSI, 5 Micron Absolute, - 65 Degrees F to 275 Degrees F, H-60 Aircraft |
| BS ISO 14085-5:2015 | Aerospace series. Hydraulic filter elements. Test methods Resistance to flow fatigue |
| NF ISO 12500-3 : 2009 | FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 3: PARTICULATES |
| 01/714407 DC : DRAFT OCT 2001 | ISO/DIS 16750-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS |
| ISO 12500-3:2009 | Filters for compressed air — Test methods — Part 3: Particulates |
| 14/30273508 DC : 0 | BS ISO 21018-4 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION IN THE FLUID - PART 4: USE OF THE LIGHT EXTINCTION TECHNIQUE |
| BS ISO 16750-4:2010 | Road vehicles. Environmental conditions and testing for electrical and electronic equipment Climatic loads |
| ASTM D 8166 : 2017 | Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters |
| BS ISO 16889 : 2008 | HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT |
| BS ISO 5011 : 2014 | INLET AIR CLEANING EQUIPMENT FOR INTERNAL COMBUSTION ENGINES AND COMPRESSORS - PERFORMANCE TESTING |
| ASTM D 8090 : 2017 | Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods |
| EN 15695-2:2017 | Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures |
| NF ISO 21018-1 : 2008 | HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 1: GENERAL PRINCIPLES |
| DIN EN ISO 15957:2015-08 | TEST DUSTS FOR EVALUATING AIR CLEANING EQUIPMENT (ISO 15957:2015) |
| DIN EN ISO 16890-3:2015-08 (Draft) | AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016) |
| DD ISO/TS 21220:2009 | Particulate air filters for general ventilation. Determination of filtration performance |
| BS EN 13443-2 : 2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 2: PARTICLE RATING 1 MICROMETER TO LESS THAN 80 MICROMETER - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| I.S. EN 14652:2006 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| ASHRAE 52.2 : 2017 | METHOD OF TESTING GENERAL VENTILATION AIR-CLEANING DEVICES FOR REMOVAL EFFICIENCY BY PARTICLE SIZE |
| VDI 3803 Blatt 4:2012-09 | Air-conditioning, system requirements - Air filter systems (VDI Ventilation Code of Practice) |
| DIN EN ISO 16890-3:2017-08 | AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016) |
| 13/30271041 DC : 0 | BS ISO 14085-5 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 5: RESISTANCE TO FLOW FATIGUE |
| 17/30296023 DC : DRAFT MAR 2017 | BS ISO 19453-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT FOR DRIVE SYSTEM OF ELECTRIC PROPULSION VEHICLES - PART 4: CLIMATIC LOADS |
| SAE J 1231 2 : *DUPLICATE RECORD* | **DUPLICATE RECORD** |
| 16/30349000 DC : 0 | BS IEC 62885-4 ED 1.0 - SURFACE CLEANING APPLIANCES - PART 4: CORDLESS DRY VACUUM CLEANERS FOR HOUSEHOLD OR SIMILAR USE - METHODS FOR MEASURING THE PERFORMANCE |
| 05/30098235 DC : 0 | ISO 21081-1 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 1: GENERAL PRINCIPLES |
| BS ISO 12500-3:2009 | Filters for compressed air. Test methods Particulates |
| I.S. EN 60312-1:2017 | VACUUM CLEANERS FOR HOUSEHOLD USE - PART 1: DRY VACUUM CLEANERS - METHODS FOR MEASURING THE PERFORMANCE |
| 13/30256250 DC : 0 | BS EN 60312-1-1 - VACUUM CLEANERS FOR HOUSEHOLD USE - PART 1-1: CORDLESS DRY VACUUM CLEANERS - METHODS FOR MEASURING THE PERFORMANCE |
| BS EN 16713-1:2016 | Domestic swimming pools. Water systems Filtration systems. Requirements and test methods |
| IEC 60312-1:2010+AMD1:2011 CSV | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
| ISO 14085-3:2015 | Aerospace series — Hydraulic filter elements — Test methods — Part 3: Filtration efficiency and retention capacity |
| 07/30153688 DC : 0 | BS ISO 10263-2 - EARTH-MOVING MACHINERY - OPERATOR ENCLOSURE ENVIRONMENT - PART 2: AIR FILTER TEST ELEMENT METHOD |
| SAE J2321/2_201305 | Disposable Hydraulic Filter Element - 190 L/min Flow, 21 MPa Collapse Pressure, Filtration Ratio = 75 at 7 μm |
| ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| SAE J575_201508 | Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in Overall Width |
| CEN/TR 16013-1:2010 | Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 1: Choice of monitor for specific applications |
| ISO/TR 16144:2002 | Hydraulic fluid power — Calibration of liquid automatic particle counters — Procedures used to certify the standard reference material SRM 2806 |
| BS ISO 18413:2015 | Hydraulic fluid power. Cleanliness of components. Inspection document and principles related to contaminant extraction and analysis, and data reporting |
| ISO 19438:2003 | Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity |
| PREN 15695-2 : DRAFT 2015 | AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 2: FILTERS, REQUIREMENTS AND TEST PROCEDURES |
| ISO 21018-4:2016 | Hydraulic fluid power — Monitoring the level of particulate contamination in the fluid — Part 4: Use of the light extinction technique |
| ISO 11155-2:2009 | Road vehicles — Air filters for passenger compartments — Part 2: Test for gaseous filtration |
| ISO 20653:2013 | Road vehicles — Degrees of protection (IP code) — Protection of electrical equipment against foreign objects, water and access |
| ISO 10263-2:2009 | Earth-moving machinery — Operator enclosure environment — Part 2: Air filter element test method |
| DIN EN 13443-2:2007-10 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 2: PARTICLE RATING 1 MUM TO LESS THAN 80 MUM - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| IEEE 2030.1.1-2015 | IEEE Standard Technical Specifications of a DC Quick Charger for Use with Electric Vehicles |
| DIN EN ISO 29461-1:2014-03 | Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements (ISO 29461-1:2013) |
| DIN EN ISO 16890-2:2017-08 | Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016) |
| ISO 29461-1:2013 | Air intake filter systems for rotary machinery — Test methods — Part 1: Static filter elements |
| ISO 21018-1:2008 | Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 1: General principles |
| SAE AIR1828B | Guide to Engine Lubrication System Monitoring |
| NF ISO 21018-3 : 2008 | HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 3: USE OF THE FILTER BLOCKAGE TECHNIQUE |
| PD CEN/TR 16013-1:2010 | Workplace exposure. Guide for the use of direct-reading instruments for aerosol monitoring Choice of monitor for specific applications |
| NF ISO 10263-2 : 2009 | EARTH-MOVING MACHINERY - OPERATOR ENCLOSURE ENVIRONMENT - PART 2: AIR FILTER ELEMENT TEST METHOD |
| BS EN 60312-1:2017 | Vacuum cleaners for household use Dry vacuum cleaners. Methods for measuring the performance |
| BS ISO 21018-3:2008 | Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid Use of the filter blockage technique |
| NFP 90 319 : 2011 | DOMESTIC SWIMMING POOLS - FILTRATION GROUPS AND SYSTEMS - TEST METHOD FOR EVALUATING THE FILTRATION EFFICIENCY, THE RETENTION CAPACITY AND THE MECHANICAL RESISTANCE |
| DD ISO/TR 16144:2002 | Hydraulic fluid power. Calibration of liquid automatic particle counters. Procedures used to certify the standard reference material SRM 2806 |
| 17/30320673 DC : 0 | BS EN ISO 17268 - GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES |
| JSSG-2009 Revision A:2013 | Air Vehicle Subsystems |
| 08/30173382 DC : DRAFT AUG 2008 | BS ISO 16750-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS |
| BS ISO 11500:2008 | Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| 00/704298 DC : DRAFT FEB 2000 | ISO/CD 2941 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING |
| SAE ARP5454B | Multi-Pass Method for Evaluating Filtration Performance of Fine Lube Filter Elements Utilized in Aerospace Power and Propulsion Lubrication Systems |
| DIN EN 16713-1:2016-08 | DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS |
| ISO 11171:2016 | Hydraulic fluid power — Calibration of automatic particle counters for liquids |
| 16/30316730 DC : 0 | BS ISO 4548-12 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 12: FILTRATION EFFICIENCY USING PARTICLE COUNTING, AND CONTAMINANT RETENTION CAPACITY |
| 07/30164305 DC : 0 | BS ISO 12500-3 - FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 3: PARTICULATES |
| 07/30162752 DC : 0 | BS ISO 2941 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING |
| ISO 11943:1999 | Hydraulic fluid power — On-line automatic particle-counting systems for liquids — Methods of calibration and validation |
| SAE J ISO 5011 : JUL 2002 | INLET AIR CLEANING EQUIPMENT FOR INTERNAL COMBUSTION ENGINES AND COMPRESSORS - PERFORMANCE TESTING |
| SAE J2600_201510 | Compressed Hydrogen Surface Vehicle Fueling Connection Devices |
| SAE AIR1666B | Performance Testing of Lubricant Filter Elements Utilized in Aircraft Power and Propulsion Lubrication Systems |
| OVE/ONORM EN 62817 : 2015 | PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION OF SOLAR TRACKERS (IEC 62817:2014) |
| BS EN 62817 : 2015 | PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION OF SOLAR TRACKERS |
| NFP 90 318 : 2011 | DOMESTIC SWIMMING POOLS FOR FAMILY USE - FILTRATION GROUP AND/OR FILTRATION SYSTEMS - SAFETY AND PERFORMANCE REQUIREMENTS |
| NSF 42 : 2017 | DRINKING WATER TREATMENT UNITS - AESTHETIC EFFECTS |
| ISO 5011:2014 | Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing |
| NSF 350 : 2014 | ONSITE RESIDENTIAL AND COMMERCIAL WATER REUSE TREATMENT SYSTEMS |
| ISO 2941:2009 | Hydraulic fluid power — Filter elements — Verification of collapse/burst pressure rating |
| NF ISO 16889 : 2008 | HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT |
| I.S. EN 62817:2015 | PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION OF SOLAR TRACKERS |
| IEEE 802.3-2012 | IEEE Standard for Ethernet |
| ISO 16889:2008 | Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element |
| SAE J2312_201305 | Automatic Transmission Intake Filter Test Procedure |
| ISO/IEC/IEEE 8802-3:2017 | Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 3: Standard for Ethernet |
| ISO 14085-4:2015 | Aerospace series — Hydraulic filter elements — Test methods — Part 4: Verification of collapse/burst pressure rating |
| IEC 62817:2014+AMD1:2017 CSV | Photovoltaic systems - Design qualification of solar trackers |
| ISO 12097-2:1996 | Road vehicles — Airbag components — Part 2: Testing of airbag modules |
| ISO 14085-5:2015 | Aerospace series — Hydraulic filter elements — Test methods — Part 5: Resistance to flow fatigue |
| BS EN 779:2012 | Particulate air filters for general ventilation. Determination of the filtration performance |
| ISO 16890-2:2016 | Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance |
| ISO 16890-3:2016 | Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured |
| ISO/TS 19713-2:2010 | Road vehicles — Inlet air cleaning equipment for internal combustion engines and compressors — Part 2: Fractional efficiency testing with coarse particles (5 µm to 40 µm optical diameter) |
| 07/30113225 DC : 0 | BS ISO 21220 - PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
| BS ISO/TR 16386:1999 | Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards |
| 08/30171660 DC : DRAFT AUG 2008 | BS ISO 19713-2 - INLET AIR CLEANING EQUIPMENT FOR INTERNAL COMBUSTION ENGINES AND COMPRESSORS - PART 2: FRACTIONAL EFFICIENCY TESTING WITH COARSE PARTICLES (5 [MU]M TO 40 [MU]M OPTICAL DIAMETER) |
| BS EN 14652 : 2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| 09/30200844 DC : 0 | BS EN 779 - PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
| ISO/TS 21220:2009 | Particulate air filters for general ventilation — Determination of filtration performance |
| 08/30187815 DC : DRAFT AUG 2008 | BS ISO 19713-1 - ROAD VEHICLES - INLET AIR CLEANING EQUIPMENT FOR INTERNAL COMBUSTION ENGINES AND COMPRESSORS - PART 1: FRACTIONAL EFFICIENCY TESTING WITH FINE PARTICLES (0,3 [MU]M TO 5 [MU]M OPTICAL DIAMETER) |
| 13/30248313 DC : 0 | BS EN ISO 15957 - LOADING DUSTS FOR TESTING AIR CLEANING EQUIPMENT (ISO/DIS 15957:2013) |
| 10/30211683 DC : 0 | BS EN ISO 29461-1 - AIR INTAKE FILTER SYSTEMS FOR ROTARY MACHINERY - TEST METHODS - PART 1: STATIC FILTER ELEMENTS |
| 14/30268894 DC : 0 | BS EN ISO 16890-2 - AIR FILTERS FOR GENERAL VENTILATION - PART 2: MEASUREMENT OF FRACTIONAL EFFICIENCY AND AIR FLOW RESISTANCE |
| ISO/TS 19713-1:2010 | Road vehicles — Inlet air cleaning equipment for internal combustion engines and compressors — Part 1: Fractional efficiency testing with fine particles (0,3 µm to 5 µm optical diameter) |
| BS ISO 3724:2007 | Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant |
| EN ISO 16890-2:2016 | Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016) |
| EN 14652:2005+A1:2007 | Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing |
| EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
| EN 16713-1:2016 | Domestic swimming pools - Water systems - Part 1: Filtration systems - Requirements and test methods |
| EN ISO 15957:2015 | Test dusts for evaluating air cleaning equipment (ISO 15957:2015) |
| EN ISO 16890-3:2016 | Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016) |
| EI 1581 : 2016 | SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS |
| I.S. EN ISO 15957:2015 | TEST DUSTS FOR EVALUATING AIR CLEANING EQUIPMENT (ISO 15957:2015) |
| SAE AS7949B | Bearings, Ball, Airframe, Antifriction, General Standard for |
| 10/30197398 DC : 0 | BS ISO 17268 - GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES |
| 15/30321906 DC : 0 | BS ISO 11943 - HYDRAULIC FLUID POWER - ON-LINE AUTOMATIC PARTICLE-COUNTING SYSTEMS FOR LIQUIDS - METHODS OF CALIBRATION AND VALIDATION |
| PD ISO/TR 16386:2014 | Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards |
| DD ISO/TS 11155-2:2002 | Road vehicles. Air filters for passenger compartments Test for gaseous filtration |
| ISO/TS 11155-2:2002 | Road vehicles — Air filters for passenger compartments — Part 2: Test for gaseous filtration |
| 13/30271035 DC : 0 | BS ISO 14085-3 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 3: FILTRATION EFFICIENCY AND RETENTION CAPACITY |
| NFX 45 303 : 2000 | FILTER CARTRIDGES - TEST METHODS - MEASUREMENT OF FILTRATION EFFICIENCY AND RETENTION CAPACITY |
| SAE ARP1827C | Measuring Aircraft Gas Turbine Engine Fine Fuel Filter Element Performance |
| BS ISO 4548-12:2017 | Methods of test for full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting and contaminant retention capacity |
| BS ISO 11943:1999 | Hydraulic fluid power. On-line automatic particle-counting systems for liquids. Methods of calibration and validation |
| 98/717481 DC : DRAFT DEC 1998 | ISO/CD 16009 - HYDRAULIC FLUID POWER - FILTER - METHOD FOR DETERMINING FILTRATION PERFORMANCE OF AN OFF-LINE ELEMENT |
| NF ISO 16750-4 : 2004 | ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS |
| 06/30128772 DC : DRAFT OCT 2006 | ISO 16889 - HYDRAULIC FLUID POWER FILTERS - MULTI-PASS METHOD FOR FILTRATION PERFORMANCE OF A FILTER ELEMENT |
| BS EN 15695-2:2017 | Agricultural tractors and self-propelled sprayers. Protection of the operator (driver) against hazardous substances Filters, requirements and test procedures |
| BS ISO 17536-1:2015 | Road vehicles. Aerosol separator performance test for internal combustion engines General |
| NSF 350-1 : 2017 | ONSITE RESIDENTIAL AND COMMERCIAL GRAYWATER TREATMENT SYSTEMS FOR SUBSURFACE DISCHARGE |
| MIL-PRF-32007 Base Document:2003 | Oily Wastewater Separation System, 6-7-Gallon Per Minute Navy Integrated Membrane System (Nims) |
| ISO 16750-4:2010 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads |
| ISO/TS 11155-1:2001 | Road vehicles — Air filters for passenger compartments — Part 1: Test for particulate filtration |
| MIL-DTL-8815-33 Base Document:2011 | Filter Elements, Non-Cleanable, Fluid Pressure, Hydraulic Line, 3500 PSI, 5 Micron Absolute,-65 Degrees F to 275 Degrees F, Aviation Ground Power Unit (AGPU) |
| SAE J2321/3_201305 | Disposable Hydraulic Filter Elements - 21 MPa Collapse Pressure, Filtration Ratio = 75 at 10 μm, 75 to 175 L/Min |
| ISO/TR 16386:2014 | Impact of changes in ISO fluid power particle counting — Contamination control and filter test standards |
| I.S. EN ISO 17268:2016 | GASEOUS HYDROGEN LAND VEHICLE REFUELLING CONNECTION DEVICES (ISO 17268:2012) |
| I.S. EN 16713-1:2016 | DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS |
| S.R. CEN TR 16013-1:2010 | WORKPLACE EXPOSURE - GUIDE FOR THE USE OF DIRECT-READING INSTRUMENTS FOR AEROSOL MONITORING - PART 1: CHOICE OF MONITOR FOR SPECIFIC APPLICATIONS |
| NF ISO 2941 : 2009 | HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING |
| NF ISO 11171 : 2011 | HYDRAULIC FLUID POWER - CALIBRATION OF AUTOMATIC PARTICLE COUNTERS FOR LIQUIDS |
| EN 60312-1:2017 | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
| ASTM D 7596 : 2014 : REDLINE | Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester |
| BS ISO 21018-4:2016 | Hydraulic fluid power. Monitoring the level of particulate contamination in the fluid Use of the light extinction technique |
| ISO 18413:2015 | Hydraulic fluid power — Cleanliness of components — Inspection document and principles related to contaminant extraction and analysis, and data reporting |
| SAE J2333_201305 | Ship Systems and Equipment - Hydraulic Systems - Filter Selection Parameters |
| I.S. EN 15695-2:2017 | AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 2: FILTERS, REQUIREMENTS AND TEST PROCEDURES |
| ISO 17268:2012 | Gaseous hydrogen land vehicle refuelling connection devices |
| EN ISO 29461-1:2013 | Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements (ISO 29461-1:2013) |
| BS EN ISO 29461-1:2013 | Air intake filter systems for rotary machinery. Test methods Static filter elements |
| BS EN ISO 15957:2015 | Test dusts for evaluating air cleaning equipment |
| ISO 3724:2007 | Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using particulate contaminant |
| ISO 15957:2015 | Test dusts for evaluating air cleaning equipment |
| I.S. EN ISO 29461-1:2013 | AIR INTAKE FILTER SYSTEMS FOR ROTARY MACHINERY - TEST METHODS - PART 1: STATIC FILTER ELEMENTS (ISO 29461-1:2013) |
| DIN EN 14652:2007-09 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| DIN EN 799 E : 2003 | BAR CODING - SYMBOLOGY SPECIFICATIONS "CODE 128" |
| DIN EN 779:2012-10 | PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
| UNE-EN ISO 16890-3:2017 | Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016) |
| UNE-EN ISO 15957:2015 | Test dusts for evaluating air cleaning equipment (ISO 15957:2015) |
| UNE-EN 62817:2016 | Photovoltaic systems - Design qualification of solar trackers |
| UNE-EN ISO 29461-1:2014 | Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements (ISO 29461-1:2013) |
| UNE-EN ISO 16890-2:2017 | Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016) |
| UNE-EN 60312-1:2017 | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
| UNE-EN 779:2013 | Particulate air filters for general ventilation - Determination of the filtration performance |
| UNE-EN ISO 17268:2017 | Gaseous hydrogen land vehicle refuelling connection devices (ISO 17268:2012) |
| UNE-EN 16713-1:2017 | Domestic swimming pools - Water systems - Part 1: Filtration systems - Requirements and test methods |
| UNE-EN 15695-2:2010 | Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures |
| NFPA T2.12.11.2 : 2007 : R2012 | HYDRAULIC FLUID POWER COMPONENTS - ASSESSMENT OF RELIABILITY BY TESTING |
| AHRI 681 (SI) : 2017 | PERFORMANCE RATING OF RESIDENTIAL AIR FILTER EQUIPMENT |
| AHRI 680 (I-P) : 2017 | PERFORMANCE RATING OF RESIDENTIAL AIR FILTER EQUIPMENT |
| NFPA T2.12.11.2:2007 | HYDRAULIC FLUID POWER COMPONENTS - ASSESSMENT OF RELIABILITY BY TESTING |
| SAE J2321_200212 | Ship Systems and Equipment—General Specification for Filter Elements—Hydraulic and Lube Oil Service |
| ISO 13320:2009 | Particle size analysis — Laser diffraction methods |
| BS 3406-5:1983 | Methods for determination of particle size distribution Recommendations for electrical sensing zone method (the Coulter principle) |
| SAE J726_200206 | Air Cleaner Test Code |
| ISO 13319:2007 | Determination of particle size distributions — Electrical sensing zone method |
| ISO 11171:2016 | Hydraulic fluid power — Calibration of automatic particle counters for liquids |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.