• There are no items in your cart

ISO 13732-1:2006

Current

Current

The latest, up-to-date edition.

Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

08-25-2006

ISO 15536-1:2006 provides temperature threshold values for burns that occur when human skin is in contact with a hot solid surface. It also describes methods for the assessment of the risks of burning, when humans could or might touch hot surfaces with their unprotected skin.

In addition, ISO 13732-1:2006 gives guidance for cases where it is necessary to specify temperature limit values for hot surfaces, but does not set surface temperature limit values.

ISO 13732-1:2006 deals with contact periods of 0,5 s and longer.

It is applicable to contact when the surface temperature is essentially maintained during the contact.

It is not applicable if a large area of the skin (approximately 10 % or more of the skin of the whole body) can be in contact with the hot surface. Neither does it apply to skin contact of more than 10 % of the head or contact which could result in burns of vital areas of the face.

ISO 13732-1:2006 is applicable to the hot surfaces of all kind of objects: equipment, products, buildings, natural objects, etc. It is applicable to hot surfaces of products that may be touched by healthy adults, children, elderly people and also by people with physical disabilities. For the purposes of simplification, it mentions only products; nevertheless, it applies to all other objects as well. It is applicable to products used in any environment, e.g. in the workplace, in the home.

It does not provide data for the protection against discomfort or pain.

Committee
ISO/TC 159/SC 5
DevelopmentNote
Supersedes ISO/DIS 13732-1 (08/2006)
DocumentType
Standard
Pages
37
PublisherName
International Organization for Standardization
Status
Current

IEC 60601-2-28 : 3.0 MEDICAL ELECTRICAL EQUIPMENT - PART 2-28: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF X-RAY TUBE ASSEMBLIES FOR MEDICAL DIAGNOSIS
CEN/TR 13387-4:2015 Child use and care articles - General safety guidelines - Part 4: Thermal hazards
ISO/TR 14121-2:2012 Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods
DIN EN ISO 11148-2:2012-06 Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011)
BS EN 60335-2-96 : 2002 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-96: PARTICULAR REQUIREMENTS FOR FLEXIBLE SHEET HEATING ELEMENTS FOR ROOM HEATING
UNE-EN ISO 4414:2011 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
I.S. EN 60335-2-62:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-62: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC RINSING SINKS
DIN EN 1034-21 E : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
BS EN 15895 : 2011 CARTRIDGE OPERATED HAND-HELD TOOLS - SAFETY REQUIREMENTS - FIXING AND HARD MARKING TOOLS
11/30229163 DC : 0 BS EN ISO 19932-1 - EQUIPMENT FOR CROP PROTECTION - KNAPSACK SPRAYERS - PART 1: REQUIREMENTS AND TEST METHODS
DIN EN 14753 E : 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
UNI EN ISO 11148-2 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
I.S. EN 60335-2-42:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-42: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC FORCED CONVECTION OVENS, STEAM COOKERS AND STEAM-CONVECTION OVENS (IEC 60335-2-42:2002 (EQV))
PREN 12733 : DRAFT 2016 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
DIN EN 15059 E : 2015 SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS
BS EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements Front loaded refuse collection vehicles
DIN EN 1034-8:2012-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
08/30180496 DC : DRAFT SEP 2008 BS EN 869 AMD1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS
BS EN ISO 11148-11:2011 Hand-held non-electric power tools. Safety requirements Nibblers and shears
16/30333438 DC : 0 BS ISO 20297-1 - INDUSTRIAL TRUCKS - LORRY-MOUNTED TRUCKS - PART 1: SAFETY REQUIREMENTS AND VERIFICATION
13/30266413 DC : 0 BS ISO 13105-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MACHINERY FOR CONCRETE SURFACE FLOATING AND FINISHING - PART 2: SAFETY REQUIREMENTS AND VERIFICATION
12/30244749 DC : 0 BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN 15166:2010-02 Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements
07/30165144 DC : 0 BS EN 60335-2-85 AMD1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-85: PARTICULAR REQUIREMENTS FOR FABRIC STEAMERS
BS ISO 20474-1:2017 Earth-moving machinery. Safety General requirements
BS EN 15166:2008 Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements
10/30191968 DC : 0 BS ISO 28803 - ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS
10/30233949 DC : 0 BS EN 12111 - TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS
08/30182209 DC : DRAFT SEP 2008 BS EN 12418 AMD1 - MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
BS ISO 12643-3:2010 Graphic technology. Safety requirements for graphic technology equipment and systems Binding and finishing equipment and systems
16/30337092 DC BS EN 13378. Pasta processing plant. Pasta presses. Safety and hygiene requirements
DIN EN ISO 11148-9:2012-06 Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011)
I.S. EN 957-5:2009 STATIONARY TRAINING EQUIPMENT - PART 5: STATIONARY EXERCISE BICYCLES AND UPPER BODY CRANK TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
NF EN ISO 11148-10 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
07/30172328 DC : 0 BS EN 60335-2-98 AMD2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-98: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR HUMIDIFIERS
11/30213783 DC : 0 BS EN 50463-1 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
I.S. EN 60335-2-109:2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-109: PARTICULAR REQUIREMENTS FOR UV RADIATION WATER TREATMENT APPLIANCES
09/30202532 DC : 0 BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
BS ISO 20297-1:2017 Industrial trucks. Lorry-mounted trucks Safety requirements and verification
I.S. EN ISO 28139:2009 AGRICULTURAL AND FORESTRY MACHINERY - KNAPSACK COMBUSTION ENGINE- DRIVEN MISTBLOWERS - SAFETY REQUIREMENTS
BS EN 13035-7 : 2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
CSA C22.2 No. 60335-2-59 : 2016 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS
12/30243081 DC : 0 BS EN 1034-17 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
I.S. EN 50569:2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
BS EN ISO 28139:2009 Agricultural and forestry machinery. Knapsack combustion engine-driven mistblowers. Safety requirements
DIN EN 16647 E : 2016 FIREPLACES FOR LIQUID FUELS - DECORATIVE APPLIANCES PRODUCING A FLAME USING ALCOHOL BASED OR GELATINOUS FUEL - USE IN PRIVATE HOUSEHOLDS
I.S. EN 15774:2010 FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 8230-1:2008 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
13/30279579 DC : 0 BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
CSA C22.2 No. 60335-2-78 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-78: PARTICULAR REQUIREMENTS FOR OUTDOOR BARBECUES
10/30205791 DC : 0 BS ISO 10896-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
15/30329716 DC BS EN 13289. Pasta processing plants. Dryers and coolers. Safety and hygiene requirements
14/30303741 DC : 0 BS EN 16282-1 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD
07/30165097 DC : 0 BS EN 60335-2-45 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES
07/30172527 DC : 0 BS EN 60335-2-54 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-54: PARTICULAR REQUIREMENTS FOR SURFACE-CLEANING APPLIANCES FOR HOUSEHOLD USE EMPLOYING LIQUIDS OR STEAM
BS EN 1570-1 : 2011 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
04/30123600 DC : DRAFT OCT 2004 ISO 11681-2 - FORESTRY MACHINERY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE
14/30299187 DC : 0 BS EN 12312-6 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DEICING/ANTIICING EQUIPMENT
BS EN 60335-2-65 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-65: PARTICULAR REQUIREMENTS FOR AIR-CLEANING APPLIANCES
13/30273033 DC : 0 BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
BS EN 60335-2-52 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-52: PARTICULAR REQUIREMENTS FOR ORAL HYGIENE APPLIANCES
I.S. EN 15093:2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
07/30165131 DC : 0 BS EN 60335-2-83 AMD1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-83: PARTICULAR REQUIREMENTS FOR HEATED GULLIES FOR ROOF DRAINAGE
09/30203674 DC : 0 BS ISO 11681-1 - MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 1: CHAIN-SAWS FOR FOREST SERVICE
I.S. EN 16474:2015 PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS
I.S. EN 1034-16:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
15/30281554 DC : 0 BS ISO 10896-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING TRUCKS
BS EN ISO 11148-10:2011 Hand-held non-electric power tools. Safety requirements Compression power tools
DIN EN 15949:2012-05 Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills
DIN EN ISO 4414:2011-04 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
ONORM EN 15746-2 : 2013 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
BS ISO 12643-4:2010 Graphic technology. Safety requirements for graphic technology equipment and systems Converting equipment and systems
15/30321082 DC : 0 BS EN ISO 20957-5 - STATIONARY TRAINING EQUIPMENT - PART 5: PEDAL CRANK TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
BS EN 1870-6:2017 Safety of woodworking machines. Circular sawing machines Circular sawing machines for fire wood
BS EN ISO 28803:2012 Ergonomics of the physical environment. Application of international standards to people with special requirements
DIN EN 15093:2009-06 Safety of machinery - Safety requirements for hot flat rolling mills
DIN EN 15180:2015-01 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
07/30165135 DC : 0 BS EN 60335-2-78 AMD1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-78: PARTICULAR REQUIREMENTS FOR OUTDOOR BARBECUES
BS EN 16474:2015 Plastics and rubber machines. Tyre curing machines. Safety requirements
BS EN 15093:2008 Safety of machinery. Safety requirements for hot flat rolling mills
07/30165107 DC : 0 BS EN 60335-2-55 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-55: PARTICULAR REQUIREMENTS FOR ELECTRICAL APPLIANCES FOR USE WITH AQUARIUMS AND GARDEN PONDS
I.S. EN 50571:2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES
BS EN 60335-2-97 : 2006 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-97: PARTICULAR REQUIREMENTS FOR DRIVES FOR ROLLING SHUTTERS, AWNINGS, BLINDS AND SIMILAR EQUIPMENT
BS ISO 10896-2:2016 Rough-terrain trucks. Safety requirements and verification Slewing trucks
11/30212367 DC : 0 BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT
08/30182206 DC : DRAFT SEP 2008 BS EN 12348 AMD1 - CORE DRILLING MACHINES ON STAND - SAFETY
PREN 474-1 : DRAFT 2017 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 60335-2-42 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-42: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC FORCED CONVECTION OVENS, STEAM COOKERS AND STEAM-CONVECTION OVENS
PREN 285 : DRAFT 2013 STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
BS EN 14677:2008 Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel
I.S. EN ISO 11806-1:2011 AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE (ISO 11806-1:2011)
12/30147224 DC : 0 BS 5970 - THERMAL INSULATION OF PIPEWORK, DUCTWORK, ASSOCIATED EQUIPMENT AND OTHER INDUSTRIAL INSTALLATIONS IN THE TEMPERATURE RANGE OF -100 DEGREES C TO +870 DEGREES C - CODE OF PRACTICE
09/30179779 DC : 0 BS EN 13457 AMD1 - FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
BS EN 15180:2014 Food processing machinery. Food depositors. Safety and hygiene requirements
12/30243084 DC : 0 BS EN 1034-21 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
BS EN 60335-2-71:2003 Household and similar electrical appliances. Safety Particular requirements for electrical heating appliances for breeding and rearing animals
CEI EN 60335-2-109 : 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-109: PARTICULAR REQUIREMENTS FOR UV RADIATION WATER TREATMENT APPLIANCES
08/30192272 DC : 0 BS EN 60335-1 F4 ED5 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 14753:2007 Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel
BS EN 60335-2-29 : 2004 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29: PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS
08/30195122 DC : DRAFT DEC 2008 BS EN 60335-2-35 AMD2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-35: PARTICULAR REQUIREMENTS FOR INSTANTANEOUS WATER HEATERS
BS EN 60335-2-106:2007 Household and similar electrical appliances. Safety Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings
10/30185766 DC : 0 BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
08/30177210 DC : DRAFT MAY 2008 BS EN 13021 AMD1 - WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
UNI EN 12012-4 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
CEI EN 60335-2-108 : 2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-108: PARTICULAR REQUIREMENTS FOR ELECTROLYSERS
09/30187535 DC : 0 BS EN 13000 - CRANES - MOBILE CRANES
I.S. EN 60335-2-70:1997 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-70: PARTICULAR REQUIREMENTS FOR MILKING MACHINES
08/30182212 DC : DRAFT SEP 2008 BS EN 13862 AMD1 - FLOOR CUTTING-OFF MACHINES - SAFETY
08/30173506 DC : DRAFT JAN 2008 BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
BS EN ISO 20957-9:2016 Stationary training equipment Elliptical trainers, additional specific safety requirements and test methods
UNE-EN ISO 4413:2011 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
I.S. EN ISO 11148-2:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS (ISO 11148-2:2011)
DIN EN 474-1:2014-03 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
DIN EN 15774:2011-10 Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements
DIN EN 15861:2013-06 Food processing machinery - Smokehouses - Safety and hygiene requirements
I.S. EN 15746-2:2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
ISO 20297-1:2017 Industrial trucks — Lorry-mounted trucks — Part 1: Safety requirements and verification
CSA E60335.2.26 : 2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-26: PARTICULAR REQUIREMENTS FOR CLOCKS
I.S. EN 60335-2-55:2003&A1:2008&A11:2018 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-55: PARTICULAR REQUIREMENTS FOR ELECTRICAL APPLIANCES FOR USE WITH AQUARIUMS AND GARDEN PONDS
CSA E60335.2.30 : 2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-30: PARTICULAR REQUIREMENTS FOR ROOM HEATERS
ISO 11148-13:2017 Hand-held non-electric power tools Safety requirements Part 13: Fastener driving tools
CSA E60335.2.13 : 2013 : INC : UPD 1 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-13: PARTICULAR REQUIREMENTS FOR DEEP FAT FRYERS, FRYING PANS AND SIMILAR APPLIANCES
BS EN 50570:2013 Household and similar electrical appliances. Safety. Particular requirements for commercial electric tumble dryers
CSA E60335.2.4 : 2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-4: PARTICULAR REQUIREMENTS FOR SPIN EXTRACTORS
CSA E60335.2.4 : 2013 : R2018 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-4: PARTICULAR REQUIREMENTS FOR SPIN EXTRACTORS
I.S. EN 12649:2008 CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
I.S. EN 415-10:2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN 378-2:2016 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
I.S. EN ISO 18217:2015 SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
I.S. EN 15377-1:2008 HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 1: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY
BS EN ISO 4414:2010 Pneumatic fluid power. General rules and safety requirements for systems and their components
CEI EN 50569 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
I.S. EN 60335-2-28:2003&A1:2008&A11:2018 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES
I.S. EN 1570-1:2011 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
I.S. EN ISO 11148-8:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS (ISO 11148-8:2011)
I.S. EN 60335-2-83:2002 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-83: PARTICULAR REQUIREMENTS FOR HEATED GULLIES FOR ROOF DRAINAGE
CSA E60335.2.9 : 2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR GRILLS, TOASTERS AND SIMILAR PORTABLE COOKING APPLIANCES
BS EN 60335-2-26 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-26: PARTICULAR REQUIREMENTS FOR CLOCKS
BS EN 60335-2-36:2002 Household and similar electrical appliances. Safety Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
I.S. EN 16500:2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
I.S. EN 50570:2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
BS EN 60335-2-75 : 2004 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES
I.S. EN 1034-26:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
I.S. EN 1829-1:2010 HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
BS EN 15059 : 2009 SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS
UNE-EN 14985:2012 Cranes - Slewing jib cranes
I.S. EN 60335-2-24:2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE MAKERS
I.S. EN 13000:2010 Cranes - Mobile cranes
BS EN 60335-2-54 : 2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-54: PARTICULAR REQUIREMENTS FOR SURFACE-CLEANING APPLIANCES FOR HOUSEHOLD USE EMPLOYING LIQUIDS OR STEAM
BS EN 60335-2-61 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-61: PARTICULAR REQUIREMENTS FOR THERMAL-STORAGE ROOM HEATERS
PREN 16282-1 : DRAFT 2014 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD
ISO 7076-6:2016 Fire protection — Foam fire extinguishing systems — Part 6: Vehicle mounted compressed air foam systems
DIN EN 1287:2015-07 (Draft) SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATION
I.S. EN 15861:2012 FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
ISO/IEC 80079-38:2016 Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines
BS ISO 13577-1:2016 Industrial furnaces and associated processing equipment. Safety General requirements
BS EN 60335-2-24:2010+A2:2019 Household and similar electrical appliances. Safety Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
ISO 19225:2017 Underground mining machines — Mobile extracting machines at the face — Safety requirements for shearer loaders and plough systems
BS EN 60335-2-13 : 2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-13: PARTICULAR REQUIREMENTS FOR DEEP FAT FRYERS, FRYING PANS AND SIMILAR APPLIANCES
ISO 19224:2017 Continuous surface miners (CSM) — Safety requirements
DIN EN 1459-2 E : 2016 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
UNI EN 15180 : 2014 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1034-17:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
I.S. EN 15954-2:2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
17/30354108 DC : 0 BS EN 17106-1 - ROAD OPERATION MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 14989-2:2007 CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR METAL CHIMNEYS AND MATERIAL INDEPENDENT AIR SUPPLY DUCTS FOR ROOM SEALED HEATING APPLICATIONS - PART 2: FLUE AND AIR SUPPLY DUCTS FOR ROOM SEALED APPLIANCES
I.S. EN 60335-2-85:2003 SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2-85: PARTICULAR REQUIREMENTS FOR FABRIC STEAMERS
BS EN ISO 20957-10:2017 Stationary training equipment Exercise bicycles with a fixed wheel or without freewheel. Additional specific safety requirements and test methods
BS EN 1459-1:2017 Rough-terrain trucks. Safety requirements and verification Variable-reach trucks
I.S. EN 1501-3:2008 REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
I.S. EN 15061:2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
UNE-EN 16500:2015 Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
UNE-EN 1459-1:2018 Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks
BS EN 50569:2013 Household and similar electrical appliances. Safety. Particular requirements for commercial electric spin extractors
BS EN 60335-2-70:2002 Household and similar electrical appliances. Safety Particular requirements for milking machines
BS EN 60335-2-51 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS
UNI EN 1034-21 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
I.S. EN 60335-2-78:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-78: PARTICULAR REQUIREMENTS FOR OUTDOOR BARBECUES
I.S. EN 60335-2-102:2016 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-102: PARTICULAR REQUIREMENTS FOR GAS, OIL AND SOLID-FUEL BURNING APPLIANCES HAVING ELECTRICAL CONNECTIONS
BS EN 60335-2-87 : 2002 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-87: PARTICULAR REQUIREMENTS FOR ELECTRICAL ANIMAL-STUNNING EQUIPMENT
DIN EN ISO/IEC 80079-38:2012-08 (Draft) EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
EN 12013:2018 Plastics and rubber machines - Internal mixers - Safety requirements
NFPA 30 : 2018 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
DIN EN 1673:2010-10 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements (includes Amendment A1:2009)
EN 676:2003+A2:2008/AC:2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
EN 285:2015 Sterilization - Steam sterilizers - Large sterilizers
EN ISO 20957-9:2016 Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods (ISO 20957-9:2016)
DIN EN 12409:2011-12 Plastics and rubber machines - Thermoforming machines - Safety requirements
DIN EN 13379:2016-06 (Draft) PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 11681-1:2012-05 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011)
DIN EN 14985 E : 2012 CRANES - SLEWING JIB CRANES
DIN EN 13378:2016-05 (Draft) PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13675:2010-10 Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010)
DIN EN 13019:2009-04 Machines for road surface cleaning - Safety requirements (includes Amendment A1:2008)
DIN EN ISO 11680-1:2012-04 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011)
DIN EN 12653:2010-06 Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements (includes Amendment A2:2009)
DIN EN 13389:2010-10 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements (includes Amendment A1:2009)
UNE-EN 378-2:2017 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
UNE-EN 60335-2-73:2004 Household and similar electrical appliances - Safety -- Part 2-73: Particular requirements for fixed immersion heaters
BS EN 12203 : 2003 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
BS EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing General requirements
BS EN ISO 19432:2012 Building construction machinery and equipment. Portable, hand-held, internal combustion engine driven cut-off machines. Safety requirements
BS EN 13457 : 2004 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
BS EN 13042-3 : 2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
UNE-EN 60335-2-21:2004 Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
BS EN 12111:2014 Tunnelling machines. Road headers and continuous miners. Safety requirements
PD IEC/TR 62368-2:2015 Audio/video, information and communication technology equipment Explanatory information related to IEC 62368-1
BS EN 618 : 2002
11/30235014 DC : 0 BS EN 13135 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
UNE-EN 60335-2-25:2012 Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens
BS EN 1856-1:2009 Chimneys. Requirements for metal chimneys System chimney products
UNE-EN 60335-2-27:2014 Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
UNE-EN 60335-2-7:2010 Household and similar electrical appliances - Safety -- Part 2-7: Particular requirements for washing machines
BS EN 1889-1:2011 Machines for underground mines. Mobile machines working underground. Safety Rubber tyred vehicles
UNE-EN 14989-2:2011 Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances
BS EN 13000 : 2010 CRANES - MOBILE CRANES
BS EN 50155:2017 Railway applications. Rolling stock. Electronic equipment
BS EN 454:2014 Food processing machinery. Planetary mixers. Safety and hygiene requirements
BS EN 12629-7 : 2004 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS
15/30286010 DC : 0 BS ISO 14990-1 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
ONORM EN 474-1 : 2015 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 1679-1 : 1998 RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
BS EN 614-1 : 2006 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
BS EN 12622 : 2009 SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
12/30268015 DC : 0 BS EN 62135-1 - RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION
BS EN 13886 : 2005 FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS
EN 60335-2-78:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-78: PARTICULAR REQUIREMENTS FOR OUTDOOR BARBECUES
BS EN 12409 : 2008 PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
BS EN 1034-1 : 2000 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1 - COMMON REQUIREMENTS
BS EN 13378 : 2001 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12853 : 2001 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
IEC 60335-2-78:2002+AMD1:2008 CSV Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues
BS EN 12418 : 2000 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
BS EN 15067:2007 Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements
BS EN 12387 : 2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
BS EN 415-6:2013 Safety of packaging machines Pallet wrapping machines
BS EN 1673 : 2000 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1673:2000 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14985:2012 CRANES - SLEWING JIB CRANES
DIN EN 12601:2011-07 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
DIN EN 12828:2003-06 HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
I.S. EN ISO 11681-2:2011 MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011)
I.S. EN 13289:2001 PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 454:2014 FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1287:2017 SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATION
EN 12203:2003+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
DIN EN 15067:2008-03 Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements
EN 1114-1:2011 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
EN 60335-2-41:2003/A2:2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS
EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
EN 1034-17:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines
EN 12418:2000+A1:2009 Masonry and stone cutting-off machines for job site - Safety
EN 12012-4:2006+A1:2008 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
EN 16228-1:2014 Drilling and foundation equipment - Safety - Part 1: Common requirements
EN 60335-2-39:2003/A2:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS
EN 12312-6:2017 Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment
EN 13379:2001+A1:2013 Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements
UNE-EN 972:1999 TANNERY MACHINES. RECIPROCATING ROLLER MACHINES. SAFETY REQUIREMENTS.
EN 12653:1999+A2:2009 Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements
EN 13020:2015 Road surface treatment machines - Safety requirements
EN 60335-2-62:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-62: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC RINSING SINKS
EN 1010-1:2004+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
EN 12547:2014 Centrifuges - Common safety requirements
EN 12182:2012 Assistive products for persons with disability - General requirements and test methods
EN 16191:2014 Tunnelling machinery - Safety requirements
EN 1034-8:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants
EN 12151:2007 Machinery and plants for the preparation of concrete and mortar - Safety requirements
EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
EN 1111:2017 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
EN 1287:2017 Sanitary tapware - Low pressure thermostatic mixing valves - General technical specification
EN 12601:2010 Reciprocating internal combustion engine driven generating sets - Safety
EN 12043:2014 Food processing machinery - Intermediate provers - Safety and hygiene requirements
EN 1034-21:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines
EN 13135-2:2004+A1:2010 Cranes - Equipment - Part 2: Non-electrotechnical equipment
EN 13035-7:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass
EN 1247:2004+A1:2010 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines
EN 60335-2-84:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS
EN 13378:2001+A1:2013 Pasta processing plants - Pasta presses - Safety and hygiene requirements
DIN EN 1287:2017-10 SANITARY TAPWARE - LOW PRESSURE THERMOSTATIC MIXING VALVES - GENERAL TECHNICAL SPECIFICATION
EN 12409:2008+A1:2011 Plastics and rubber machines - Thermoforming machines - Safety requirements
EN 60335-2-38:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS
EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
IEC 60601-2-28:2017 Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
EN 60335-2-108 : 2008 Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers
EN 62271-202:2014/AC:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014)
EN 13021:2003+A1:2008 Winter service machines - Safety requirements
EN 60335-2-12 : 2003 AMD 1 2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES
DIN EN 1111:2017-10 SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION
EN 60335-2-106:2007 Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings
EN 13113:2002+A1:2010 Tannery machines - Roller coating machines - Safety requirements
ONORM EN 1829-1 : 2010 HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
EN 13289:2001+A1:2013 Pasta processing plants - Dryers and coolers - Safety and hygiene requirements
EN 12622:2009+A1:2013 Safety of machine tools - Hydraulic press brakes
EN 12312-2:2014 Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles
EN 60335-2-65:2003/A11:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-65: PARTICULAR REQUIREMENTS FOR AIR-CLEANING APPLIANCES (IEC 60335-2-65:2002)
EN 12649:2008+A1:2011 Concrete compactors and smoothing machines - Safety
EN 13457:2004+A1:2010 Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements
EN 13042-1:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder
UNI EN 1034-1 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
EN 13042-3:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines
EN 1034-26:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 26: Roll packaging machines
EN 60335-2-36:2002/A11:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-36: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC COOKING RANGES, OVENS, HOBS AND HOB ELEMENTS (IEC 60335-2-36:2002)
ONORM EN 1915-1 : 2013 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
DIN EN 15287-1:2010-12 Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances (includes Amendment A1:2010)
DIN EN ISO 11148-11:2012-06 Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)
DIN EN ISO 9241-410:2012-12 ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 410: DESIGN CRITERIA FOR PHYSICAL INPUT DEVICES (ISO 9241-410:2008 + AMD.1:2012)
DIN EN ISO 11148-12:2013-05 Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)
DIN EN 1501-3:2010-06 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
11/30246684 DC : 0 BS EN 1953 - ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
I.S. EN ISO 16092-1:2018 MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS (ISO 16092-1:2017)
ISO 26322-1:2008 Tractors for agriculture and forestry — Safety — Part 1: Standard tractors
UNE-EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
UNI EN ISO 19932-1 : 2013 EQUIPMENT FOR CROP PROTECTION - KNAPSACK SPRAYERS - PART 1: SAFETY AND ENVIRONMENTAL REQUIREMENTS
07/30172277 DC : 0 BS EN 60335-2-31 AMD2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-31: PARTICULAR REQUIREMENTS FOR RANGE HOODS
BS ISO 17966:2016 Assistive products for personal hygiene that support users. Requirements and test methods
DIN EN 15955-2:2013-09 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
CSA E60335.2.5 : 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-5: PARTICULAR REQUIREMENTS FOR DISHWASHERS
ISO 13105-2:2014 Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 2: Safety requirements and verification
BS EN ISO 11148-1:2011 Hand-held non-electric power tools. Safety requirements Assembly power tools for non-threaded mechanical fasteners
08/30177207 DC : DRAFT MAY 2008 BS EN 13019 AMD1 - MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
IEC 60601-2-28:2017 RLV Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
09/30201361 DC : 0 BS ISO 12643-2 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 2: PRESS EQUIPMENT AND SYSTEMS
15/30326831 DC : 0 BS EN 1114-3 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
DIN EN 16191 E : 2014 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
11/30247811 DC : 0 BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
UNE-EN 50463-1:2013 Railway applications - Energy measurement on board trains - Part 1: General
BS EN 15774:2010 Food processing machinery. Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi). Safety and hygiene requirements
UNI EN 16500 : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
DIN EN 13035-7 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
UNI EN ISO 11148-1 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
13/30256922 DC : 0 BS EN 1459-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
BS EN 50463-1:2017 Railway applications. Energy measurement on board trains General
17/30341100 DC : 0 BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
BS EN 60335-2-98 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-98: PARTICULAR REQUIREMENTS FOR HUMIDIFIERS
07/30172285 DC : 0 BS EN 60335-2-97 AMD2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-97: PARTICULAR REQUIREMENTS FOR DRIVES FOR ROLLING SHUTTERS, AWNINGS, BLINDS AND SIMILAR EQUIPMENT
BS ISO 14885:2014 Large yachts. Diesel engines for main propulsion and essential auxiliaries. Safety requirements
09/30201364 DC : 0 BS ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS
PREN 1672-1 : DRAFT 2012 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
09/30211248 DC : 0 BS EN 16029 - RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SAFETY REQUIREMENTS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES
BS EN 60335-2-108:2008 Household and similar electrical appliances. Safety Particular requirements for electrolysers
08/30183842 DC : DRAFT JUNE 2008 BS EN ISO 11148-6 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
BS EN 1034-16:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Paper and board making machines
I.S. EN ISO 11148-10:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS (ISO 11148-10:2011)
CAN/CSA-E60335-2-13:13 (R2018) Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances (Adopted IEC 60335-2-13:2009, sixth edition, 2009-12, with Canadian deviations)
08/30183838 DC : DRAFT JUNE 2008 BS EN ISO 11148-4 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
08/30195168 DC : DRAFT DEC 2008 BS EN 60335-2-74/A2 ED 2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS
CSA C22.2 No. 0 : 2010 : INC : UPD 1 : 2011 GENERAL REQUIREMENTS - CANADIAN ELECTRICAL CODE, PART 2
BS EN ISO 11806-1:2011 Agricultural and forestry machinery. Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers Machines fitted with an integral combustion engine
PREN 1114-3 : DRAFT 2015 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
BS EN 16500:2014 Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements
CEI EN 60335-2-24 : 2011 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE MAKERS
07/30172304 DC : 0 BS EN 60335-2-15 AMD2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-15: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR HEATING LIQUIDS
12/30259421 DC : 0 BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
10/30233953 DC : 0 BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS
CEI EN 60335-2-106 : 2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-106: PARTICULAR REQUIREMENTS FOR HEATED CARPETS AND FOR HEATING UNITS FOR ROOM HEATING INSTALLED UNDER REMOVABLE FLOOR COVERINGS
UNI EN 16191 : 2014 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
08/30186852 DC : DRAFT JULY 2008 BS EN ISO 4413 - HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
BS EN ISO 4413:2010 Hydraulic fluid power. General rules and safety requirements for systems and their components
UNI EN 16228-1 : 2014 DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
EN 474-1:2006+A5:2018 Earth-moving machinery - Safety - Part 1: General requirements
BS EN ISO 19932-1:2013 Equipment for crop protection. Knapsack sprayers Safety and environmental requirements
12/30255086 DC : 0 BS EN 289 - PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
09/30212538 DC : 0 BS EN 60335-2-53 ED. 4.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-53: PARTICULAR REQUIREMENTS FOR SAUNA HEATING APPLIANCES AND INFRARED CABINS
BS EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines Common safety requirements
07/30172519 DC : 0 BS EN 60335-2-9 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR GRILLS, TOASTERS AND SIMILAR PORTABLE COOKING APPLIANCES
I.S. EN 12151:2007 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
I.S. EN ISO 20957-10:2017 STATIONARY TRAINING EQUIPMENT - PART 10: EXERCISE BICYCLES WITH A FIXED WHEEL OR WITHOUT FREEWHEEL - ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-10:2017)
08/30195162 DC : DRAFT DEC 2008 BS EN 60335-2-73/A2 ED 2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS
08/30195105 DC : DRAFT DEC 2008 BS EN 60335-2-2 ED6 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-2: PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND WATER-SUCTION CLEANING APPLIANCES
11/30251968 DC : 0 BS EN 454 - FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 60335-2-48 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRILLERS AND TOASTERS
BS EN 16647:2015 Fireplaces for liquid fuels. Decorative appliances producing a flame using alcohol based or gelatinous fuel. Use in private households
12/30243465 DC : 0 BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
BS EN ISO 11148-5:2011 Hand-held non-electric power tools. Safety requirements Rotary percussive drills
12/30259316 DC : 0 BS ISO 14885 - SHIPS AND MARINE TECHNOLOGY - LARGE YACHTS - AUXILIARY DIESEL ENGINES - SAFETY REQUIREMENTS
15/30295265 DC : 0 BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
UNI EN 15093 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
PREN 1889-1 : DRAFT 2010 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
BS EN 60335-2-44 : 2002 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-44: PARTICULAR REQUIREMENTS FOR IRONERS
UNI EN 1034-26 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
DIN EN ISO 14505-2:2007-04 Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature (ISO 14505-2:2006)
07/30165148 DC : 0 BS EN 60335-2-12 AMD1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES
PREN 1953 : DRAFT 2011 ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
17/30359101 DC : 0 BS ISO 21873-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MOBILE CRUSHERS - PART 2: SAFETY REQUIREMENTS
UNI EN ISO 11148-5 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
13/30278676 DC : 0 BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
DIN EN 16327:2014-07 FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
16/30277014 DC : DRAFT MAR 2016 BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
UNI EN ISO 11148-6 : 2013 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
07/30167315 DC : 0 BS EN 60335-2-51 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51 - PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS
DIN EN 16228-1:2014-10 Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014
08/30177213 DC : DRAFT JUNE 2008 BS EN 13524 AMD1 - HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
BS EN 16191:2014 Tunnelling machinery. Safety requirements
UNI EN 15377-1 : 2008 HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 1: DETERMINATION OF THE DESIGN HEATING AND COOLING CAPACITY
DIN EN 1829-1:2010-05 High pressure water jet machines - Safety requirements - Part 1: Machines
07/30172308 DC : 0 BS EN 60335-2-21 AMD2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR STORAGE WATER HEATERS
BS ISO 12643-2:2010 Graphic technology. Safety requirements for graphic technology equipment and systems Prepress and press equipment and systems
07/30165115 DC : 0 BS EN 60335-2-65 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-65: PARTICULAR REQUIREMENTS FOR AIR-CLEANING APPLIANCES
SAE J 3047 : 2016 RECOMMENDATION FOR ACCEPTABLE OPERATING PARAMETERS OF HEATED AUTOMOBILE SEATS IN ORDER TO MITIGATE OCCUPANT INJURY
09/30187371 DC : 0 BS ISO 11148-1 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
09/30180290 DC : 0 BS EN 1247:2004/A1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
12/30244743 DC : 0 BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
15/30329543 DC : 0 BS EN 50463-1 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
ISO 13577-1:2016 Industrial furnaces and associated processing equipment Safety Part 1: General requirements
09/30183457 DC : 0 BS EN 13020:2004/A1 - ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS
08/30195149 DC : DRAFT DEC 2008 BS EN 60335-2-41/A2 ED 3 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS
EN ISO 19225:2017 Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017)
09/30201995 DC : 0 BS EN 15949 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
BS EN 1672-1:2014 Food processing machinery. Basic concepts Safety requirements
10/30211242 DC : 0 BS EN 12601 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
ISO 12643-4:2010 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 4: Converting equipment and systems
06/30157328 DC : 0 BS EN 60335-2-32 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-32: PARTICULAR REQUIREMENTS FOR MASSAGE APPLIANCES
CEI EN 60335-2-27 : 2015 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN EXPOSURE TO ULTRAVIOLET AND INFRARED RADIATION
PREN 15746-2 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN 15746-2:2016-02 (Draft) Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015
DIN EN 15861 E : 2013 FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 60335-2-74 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS
DIN EN 1570-1:2015-01 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
DIN EN ISO 20957-5 E : 2017 STATIONARY TRAINING EQUIPMENT - PART 5: STATIONARY EXERCISE BICYCLES AND UPPER BODY CRANK TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-5:2016)
DIN EN ISO 4413:2011-04 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
NF EN ISO 11148-9 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
CSA E60335-2-65:2011 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-65: PARTICULAR REQUIREMENTS FOR AIR-CLEANING APPLIANCES
CSA C22.2 No. 60335-2-45 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES
DIN EN ISO 18217 E : 2015 SAFETY OF WOODWORKING MACHINES - EDGEBANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
CSA E60335.2.10 : 2006 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES
IEC 60335-2-7:2008 RLV Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines
I.S. EN 60335-2-25:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-25: PARTICULAR REQUIREMENTS FOR MICROWAVE OVENS, INCLUDING COMBINATION MICROWAVE OVENS
DIN EN ISO 11148-8:2012-06 Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011)
CSA E60335-2-65 : 2011 : R2016 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-65: PARTICULAR REQUIREMENTS FOR AIR-CLEANING APPLIANCES
PREN 1539 : DRAFT 2012 DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
BIS IS/ISO 12643-2 : 2010 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 2: PREPRESS AND PRESS EQUIPMENT AND SYSTEMS
CEI EN 50463-1 : 2013 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
ANSI B11.0 : 2015 SAFETY OF MACHINERY - GENERAL REQUIREMENTS AND RISK ASSESSMENT
BS EN ISO/IEC 80079-38 : 2016 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016)
I.S. EN 1012-3:2013 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
I.S. EN 60335-2-81:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335 -2-81:2002 (EQV))
BS EN 60335-2-43 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-43: PARTICULAR REQUIREMENTS FOR CLOTHES DRYERS AND TOWEL RAILS
EN 50463-1:2017 Railway applications - Energy measurement on board trains - Part 1: General
BS EN 60335-2-105 : 2005 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-105: PARTICULAR REQUIREMENTS FOR MULTIFUNCTIONAL SHOWER CABINETS
I.S. EN 1672-1:2014 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
I.S. EN 60335-2-108:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-108: PARTICULAR REQUIREMENTS FOR ELECTROLYSERS
I.S. EN 62271-202:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION
BS EN 60335-2-82 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES
BS EN 60335-2-12 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES
BS EN 15061 : 2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
BS EN 60335-2-59 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS
I.S. EN 15949:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
I.S. EN 16282-5:2017 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING
I.S. EN 15180:2014 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 15955-2:2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
BS EN 60335-2-83 : 2002 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-83: PARTICULAR REQUIREMENTS FOR HEATED GULLIES FOR ROOF DRAINAGE
BS EN 13135 : 2013 CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
UNE-EN 16327:2015 Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
ISO/TS 16976-5:2013 Respiratory protective devices Human factors Part 5: Thermal effects
CEI EN 50570 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
PREN 12601 : DRAFT 2010 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
UNI EN 15287-1 : 2010 CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
ISO 10896-2:2016 Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks
ISO/TR 22100-3:2016 Safety of machinery Relationship with ISO 12100 Part 3: Implementation of ergonomic principles in safety standards
DIN EN 1111:2015-07 (Draft) SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION
UNI EN 15287-2 : 2008 CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 2: CHIMNEYS FOR ROOM-SEALED APPLIANCES
UNE-EN 15861:2013 Food processing machinery - Smokehouses - Safety and hygiene requirements
UNI EN 15949 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
16/30341165 DC : 0 BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
BS EN 60335-2-84 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS
UNE-EN 50569:2014 Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors
EN 60335-2-29:2004/A2:2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29: PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS
BS EN 474-1:2006+A6:2019 Earth-moving machinery. Safety General requirements
UNI EN 1034-27 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
NF EN ISO 11148-11 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
UNI EN 15774 : 2011 FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS
PREN 289 : DRAFT 2012 PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
EN 60335-2-52 : 2003 AMD 11/COR 12 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-52: PARTICULAR REQUIREMENTS FOR ORAL HYGIENE APPLIANCES (IEC 60335-2-52:2002)
I.S. EN 14033-3:2017 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
I.S. EN 60335-2-21:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR STORAGE WATER HEATERS
I.S. EN 60335-2-48:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL GRILLERS AND TOASTERS (IEC 60335-2-48:2002 (EQV))
I.S. EN 60335-2-39:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS
I.S. EN 60335-2-60:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-60: PARTICULAR REQUIREMENTS FOR WHIRLPOOL BATHS AND WHIRLPOOL SPAS
I.S. EN 60335-2-52:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-52: PARTICULAR REQUIREMENTS FOR ORAL HYGIENE APPLIANCES (IEC 60335-2-52:2002 (EQV))
I.S. EN 60335-2-96:2002 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-96: PARTICULAR REQUIREMENTS FOR FLEXIBLE SHEET HEATING ELEMENTS FOR ROOM HEATING
I.S. EN 1870-6:2017 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD
IEC 60335-2-25:2010+AMD1:2014+AMD2:2015 CSV Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combinationmicrowave ovens
I.S. EN 14492-2:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels
DIN EN 1010-1:2011-06 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010)
DIN EN 746-1:2010-02 Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment (includes Amendment A1:2009)
DIN EN 12387:2010-03 Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements (includes Amendment A1:2009)
DIN EN 1777:2010-06 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
DIN EN 13000:2014-11 CRANES - MOBILE CRANES
DIN EN 13021:2009-04 Winter service machines - Safety requirements (includes Amendment A1:2008)
DIN EN 12182:2012-07 Assistive products for persons with disability - General requirements and test methods
DIN EN 12203:2010-07 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements; German version EN 12203:2003+A1:2009
DIN EN 1012-1:2011-02 Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
DIN EN 1417:2015-03 Plastics and rubber machines - Two roll mills - Safety requirements; German version EN 1417:2014
DIN EN 12312-6 E : 2009 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DEICING/ANTIICING EQUIPMENT
DIN EN 14957 E : 2010 FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12418:2010-03 Masonry and stone cutting-off machines for job site - Safety (includes Amendment A1:2009)
DIN EN 15027 E : 2010 TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
DIN EN 12001:2012-11 CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
DIN EN 267:2012-03 (Draft) AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 14681:2010-10 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010)
DIN EN ISO 8528-13 E : 2017 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO 8528-13:2016, CORRECTED VERSION 2016-10-15)
DIN EN 267:2011-11 Automatic forced draught burners for liquid fuels
DIN EN 869:2009-12 Safety of machinery - Safety requirements for pressure metal diecasting units (includes Amendment A1:2009)
DIN EN 536:2016-01 ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
DIN EN 15027:2010-03 Transportable wall saw and wire saw equipment for job site - Safety (includes Amendment A1:2009)
DIN EN ISO 8528-13:2014-09 (Draft) RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO 8528-13:2016, CORRECTED VERSION 2016-10-15)
DIN EN 14656:2010-10 Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010)
DIN EN 1856-1:2009-09 CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS
DIN EN 13042-3:2010-05 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines (includes Amendment A1:2009)
DIN EN 15011:2014-09 Cranes - Bridge and gantry cranes (includes Amendment A1:2014)
UNE-EN 289:2014 Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
BS EN 13524 : 2003 HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
UNE-EN ISO 11680-1:2012 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011)
IEC 60335-2-16:2002+AMD1:2008+AMD2:2011 CSV Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers
BS EN ISO 11680-1:2011 Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners Machines fitted with an integral combustion engine
ISO 11806-1:2011 Agricultural and forestry machinery Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers Part 1: Machines fitted with an integral combustion engine
IEC 60335-2-12:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances
BS EN 12312-6:2017 Aircraft ground support equipment. Specific requirements Deicers and de-icing/anti-icing equipment
BS EN 12653 : 2000 FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
BS EN 12043:2014 Food processing machinery. Intermediate provers. Safety and hygiene requirements
BS EN 13379 : 2001 PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 1777:2011 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
BS EN 14673 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
UNE-EN 13020:2016 Road surface treatment machines - Safety requirements
UNE-EN 12547:2015 Centrifuges - Common safety requirements
BS EN 12601:2010 Reciprocating internal combustion engine driven generating sets. Safety
BS EN 836 : 1997 GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY
EN 60335-2-24:2010 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
UNE-EN 13135-2:2005 Cranes - Equipment - Part 2: Non-electrotechnical equipment
I.S. EN 13524:2003 HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
DIN EN 1915-1:2001-06 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
I.S. EN 619:2002
I.S. EN 12418:2000 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
I.S. EN 13862:2002 FLOOR CUTTING-OFF MACHINES - SAFETY
I.S. EN 12203:2003 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
I.S. EN 869:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS
I.S. EN 289:2014 PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 14656:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
I.S. EN 1012-1:2010 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS
I.S. EN ISO 19432:2012 BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012)
I.S. EN 1679-1:1998 RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
EN 15746-2:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
I.S. EN 415-6:2013 SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES
I.S. EN 13379:2001 PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12622:2009 SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
I.S. EN 13113:2002 TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
I.S. EN 50155:2017-11 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT
UNI EN 1673 : 2010 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 11680-1:2011 MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLEMOUNTED POWERED PRUNERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE (ISO 11680-1:2011)
DIN EN 13524:2003-10 HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
I.S. EN 1111:2017 SANITARY TAPWARE - THERMOSTATIC MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATION
EN 13524:2003+A2:2014 Highway maintenance machines - Safety requirements
I.S. EN 13042-1:2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
I.S. EN 422:2009 PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN ISO 11681-1:2011 MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 1: CHAIN-SAWS FOR FOREST SERVICE (ISO 11681-1:2011)
I.S. EN 13886:2005 FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13861:2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
I.S. EN 614-1:2006 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
I.S. EN 13378:2001 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12043:2014 FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
EN 1673:2000+A1:2009 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements
I.S. EN 12182:2012 ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS
I.S. EN 14957:2006 FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12750:2013 SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
I.S. EN 1915-1:2013 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
I.S. EN 12409:2008 PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
I.S. EN 13732:2013 FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE
I.S. EN 12312-6:2017 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DE-ICING/ANTI-ICING EQUIPMENT
I.S. EN 12348:2000 CORE DRILLING MACHINES ON STAND - SAFETY
I.S. EN 12111:2014 TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
I.S. EN 1114-1:2011 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
DIN EN 1034-1:2010-12 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements (includes Amendment A1:2010)
I.S. EN 14681:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
NFPA 1 : 2021 FIRE CODE
I.S. EN 1034-1:2000 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
I.S. EN 1539:2015 DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
I.S. EN 617:2001
I.S. EN 1889-1:2011 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
I.S. EN 13675:2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
I.S. EN 931:1998 FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
I.S. EN 12828:2012 HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
I.S. EN 201:2009 PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
EN 15011:2011+A1:2014 Cranes - Bridge and gantry cranes
I.S. EN 1777:2010 HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
DIN EN 1539:2016-02 DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
I.S. EN 13042-3:2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
I.S. EN 12312-2:2014 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 2: CATERING VEHICLES
I.S. EN 12653:2000 FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
I.S. EN 14710-1:2005 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS
I.S. EN 809:1998 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
I.S. EN 14180:2014 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
DIN EN 13289:2013-05 PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 15027:2007 TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
I.S. EN 13389:2005 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13019:2001 MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
EN 1829-1:2010 High pressure water jet machines - Safety requirements - Part 1: Machines
I.S. EN 12853:2001 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1247:2004 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
I.S. EN 1417:2014 PLASTICS AND RUBBER MACHINES - TWO-ROLL MILLS - SAFETY REQUIREMENTS
I.S. EN 1010-1:2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
I.S. EN 741:2000 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS
DIN EN 14180:2003-10 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
I.S. EN 12547:2014 CENTRIFUGES - COMMON SAFETY REQUIREMENTS
CEN ISO/TR 22411:2011 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008)
DIN EN 13378:2013-05 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14673:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
DIN EN 13379:2013-05 PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
ONORM EN 1673 : OCT 2010 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 972:1998 TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS
I.S. EN 1856-1:2009 CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS
I.S. EN 12001:2012 CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
I.S. EN 12387:2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 13021:2003 WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
DIN EN 1845:2008-06 Footwear manufacturing machines - Footwear moulding machines - Safety requirements
I.S. EN 618:2002
I.S. EN 1845:2007 FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 536:2015 ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
I.S. EN 1953:2013 ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
I.S. EN 13457:2004 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
I.S. EN 12629-7:2004 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS
I.S. EN 13390:2002 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 15746-2 : 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 13020:2015 ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS
UNI EN 12387 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 13390 : 2010 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
ONORM EN 13732 : 2013 FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE
DIN EN ISO 28803:2012-06 Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO 28803:2012)
DIN EN ISO 11148-3:2013-05 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012)
07/30170129 DC : 0 BS EN 1856-1 - CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS
DIN EN 16474 E : 2015 PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
UNI EN 15861 : 2012 FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
16/30322398 DC : 0 BS EN 1612 - PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES AND PLANTS - SAFETY REQUIREMENTS
BS EN 15287-2:2008 Chimneys. Design, installation and commissioning of chimneys Chimneys for roomsealed appliances
UNI EN 415-8 : 2008 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
I.S. EN 285:2015 STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
BS EN ISO 11148-2:2011 Hand-held non-electric power tools. Safety requirements Cutting-off and crimping power tools
PD ISO/TR 22100-3:2016 Safety of machinery. Relationship with ISO 12100 Implementation of ergonomic principles in safety standards
CEI EN 50571 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES
BS EN ISO 11148-3:2012 Hand-held non-electric power tools. Safety requirements Drills and tappers
BS EN 60335-2-62:2003 Household and similar electrical appliances. Safety Particular requirements for commercial electric rinsing sinks
BS EN 16282-5:2017 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air duct. Design and dimensioning
08/30194290 DC : 0 BS EN 1856-1 - CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS
NF EN ISO 11148-5 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY, PERCUSSIVE DRILLS
ANSI/SPI B151.31:2014 PLASTICS MACHINERY - SAFETY REQUIREMENTS FOR THE MANUFACTURE AND USE OF BLOW MOLDING MACHINES
DIN EN 1672-1:2014-12 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
09/30196811 DC : 0 BS ISO 11680-1 - MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE
BS ISO 13105-2 : 2014 BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MACHINERY FOR CONCRETE SURFACE FLOATING AND FINISHING - PART 2: SAFETY REQUIREMENTS AND VERIFICATION
I.S. EN 60974-1:2012 ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES (IEC 60974-1:2012 (EQV))
DIN EN ISO 18217:2015-12 Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)
13/30280243 DC : 0 BS ISO 5393 - ROTARY TOOLS FOR THREADED FASTENERS - PERFORMANCE TEST METHOD
PREN 13379 : DRAFT 2016 PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
09/30183551 DC : 0 BS ISO 11148-7 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
14/30302140 DC : 0 BS EN 1459-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
08/30183566 DC : DRAFT JUNE 2008 BS ISO 11148-3 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
15/30296744 DC : 0 BS EN 12013 - PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
BS EN ISO 20957-5:2016 Stationary training equipment Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods
09/30175678 DC : 0 BS EN 14681:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
BS EN 60335-2-58 : 2005 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES
07/30167307 DC : 0
DIN EN 14677:2008-11 SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
BS EN 1034-17:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Tissue making machines
BS EN 14033-3 : 2009 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
DIN EN 15061:2009-05 Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008)
12/30258755 DC : 0 BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
07/30172269 DC : 0 BS EN 60335-2-8 AMD2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-8: PARTICULAR REQUIREMENTS FOR SHAVERS, HAIR CLIPPERS AND SIMILAR APPLIANCES
BIS IS/ISO 12643-4 : 2010 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 4: CONVERTING EQUIPMENT AND SYSTEMS
BS EN 16228-1:2014 Drilling and foundation equipment. Safety Common requirements
12/30257298 DC : 0 BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 15059:2015-06 SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 1459-1:2017 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
PREN 13204 : DRAFT 2015 DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
06/30157246 DC : 0 BS ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT
UNI EN 15094 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
09/30182302 DC : 0 BS EN 1034-1:2000/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
17/30317170 DC : 0 BS EN ISO 20430 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
BS EN 415-8:2008 Safety of packaging machines Strapping machines
UNI EN ISO 8230-1 : 2009 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN ISO 11148-12 : 2013 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS
BS PD ISO/TR 22100-1 : 2015 SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS
07/30161523 DC : 0 BS ISO 26322-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY - PART 1: STANDARD TRACTORS
BS PD ISO/TR 22411 : 2008
13/30291774 DC : 0 BS EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
12/30258099 DC BS EN 267. Forced draught burners for liquid fuels
BS EN 50571:2013 Household and similar electrical appliances. Safety. Particular requirements for commercial electric washing machines
BS EN 60335-2-38:2003 Household and similar electrical appliances. Safety Particular requirements for commercial electric griddles and griddle grills
09/30183557 DC : 0 BS EN ISO 11148-9 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
DIN EN 16191:2014-09 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
10/30214958 DC : 0 BS EN 1915-1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
BS EN 1034-21:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Coating machines
DIN EN 15094:2009-04 Safety of machinery - Safety requirements for cold flat rolling mills
07/30165071 DC : 0 BS EN 60335-2-95 AMD 2 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR DRIVES FOR VERTICALLY MOVING GARAGE DOORS FOR RESIDENTIAL USE
UNI EN ISO 11148-8 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
UNI EN 16327 : 2014 FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
16/30342969 DC : 0 BS EN ISO 20957-10 - STATIONARY TRAINING EQUIPMENT - PART 10: EXERCISE BICYCLES WITH A FIXED WHEEL OR WITHOUT FREEWHEEL, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
UNE-EN 16647:2016 Fireplaces for liquid fuels - Decorative appliances producing a flame using alcohol based or gelatinous fuel - Use in private households
07/30165067 DC : 0 BS EN 60335-2-101 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-101: PARTICULAR REQUIREMENTS FOR VAPORIZERS
07/30165125 DC : 0 BS EN 60335-2-66 AMD1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-66: PARTICULAR REQUIREMENTS FOR WATER-BED HEATERS
BS EN 15287-1 : 2007 CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
BS EN 15094:2008 Safety of machinery. Safety requirements for cold flat rolling mills
UNE-EN 16474:2015 Plastics and rubber machines - Tyre curing machines - Safety requirements
BS ISO 12648:2006 Graphic technology. Safety requirements for printing press systems
UNI EN ISO 9241-410 : 2012 ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 410: DESIGN CRITERIA FOR PHYSICAL INPUT DEVICES
UNI EN 14753 : 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
BS EN ISO 14505-2:2006 Ergonomics of the thermal environment. Evaluation of thermal environments in vehicles Determination of equivalent temperature
BS EN 1012-3:2013 Compressors and vacuum pumps. Safety requirements Process compressors
BS EN 60335-2-89 : 2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR
BS EN 60335-2-27:2013 Household and similar electrical appliances. Safety Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
08/30183861 DC : DRAFT SEP 2008 BS EN 13732 - FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARM - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE
UNI EN 15895 : 2011 CARTRIDGE OPERATED HAND-HELD TOOLS - SAFETY REQUIREMENTS - FIXING AND HARD MARKING TOOLS
BS EN 60335-2-73 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS
BS EN 60335-2-25 : 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-25: PARTICULAR REQUIREMENTS FOR MICROWAVE OVENS, INCLUDING COMBINATION MICROWAVE OVENS
09/30182215 DC : 0 BS EN 12001:2003/A1 - CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
08/30183606 DC : DRAFT JUNE 2008 BS EN 60335-2-109 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-109: PARTICULAR REQUIREMENTS FOR UV RADIATION WATER TREATMENT APPLIANCES
PREN 16191 : DRAFT 2010 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
DIN EN 16474:2015-08 PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
BS ISO 21789:2009 Gas turbine applications — Safety
08/30195114 DC : DRAFT DEC 2008 BS EN 60335-2-29 AMD2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29: PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS
BS EN 60974-1:2012 Arc welding equipment Welding power sources
DIN EN ISO 20957-9 E : 2017 STATIONARY TRAINING EQUIPMENT - PART 9: ELLIPTICAL TRAINERS, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-9:2016)
DIN EN 415-10:2014-07 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
PREN 50463-1 : DRAFT 2015 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
CSA C22.2 No. 0 :2010(R2015) GENERAL REQUIREMENTS - CANADIAN ELECTRICAL CODE, PART 2
UNE-EN ISO 11806-1:2012 Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011)
CSA C22.2 No. 80601-2-60 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 2-60: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF DENTAL EQUIPMENT
DIN EN 14753:2008-03 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
UNI EN 1034-8 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
CSA E60335.2.13 : 2013 : INC : UPD 1 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-13: PARTICULAR REQUIREMENTS FOR DEEP FAT FRYERS, FRYING PANS AND SIMILAR APPLIANCES
UNE-EN 60335-2-109:2011 Household and similar electrical appliances - Safety -- Part 2-109: Particular requirements for UV radiation water treatment appliances
I.S. EN 60335-2-16:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002 (MOD))
BS EN 60335-2-85 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-85: PARTICULAR REQUIREMENTS FOR FABRIC STEAMERS
BS EN 60335-2-10 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES
I.S. EN 60335-2-59:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS
EN ISO 20957-10:2017 Stationary training equipment - Part 10: Exercise bicycles with a fixed wheel or without freewheel - Additional specific safety requirements and test methods (ISO 20957-10:2017)
CSA E60335.2.6 : 2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR STATIONARY COOKING RANGES, HOBS, OVENS AND SIMILAR APPLIANCES
I.S. EN 1459-2:2015 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
BS EN 60335-2-37:2002 Household and similar electrical appliances. Safety Particular requirements for commercial electric deep fat fryers
I.S. EN 60335-1:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
ONORM EN 1501-3 : 2010 REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
I.S. EN 60335-2-13:2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-13: PARTICULAR REQUIREMENTS FOR DEEP FAT FRYERS, FRYING PANS AND SIMILAR APPLIANCES (IEC 60335-2-13:2009 (EQV))
I.S. EN ISO 11148-3:2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012)
UNI EN ISO 11148-4 : 2013 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
BS EN 60335-1 : 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
UNI EN ISO 11148-9 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
I.S. EN ISO 11148-12:2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS (ISO 11148-12:2012)
BS EN 60335-2-21 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR STORAGE WATER HEATERS
UNI EN 415-10 : 2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
UNE-EN ISO 20957-5:2017 Stationary training equipment - Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods (ISO 20957-5:2016)
I.S. EN 474-1:2006 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 60335-2-26:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-26: PARTICULAR REQUIREMENTS FOR CLOCKS
I.S. EN 16774:2016 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
16/30338566 DC : 2016-06 BS EN 13379 - PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
CSA E60335.2.31 : 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-31: PARTICULAR REQUIREMENTS FOR RANGE HOODS AND OTHER COOKING FUME EXTRACTORS
I.S. EN 1034-21:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
EN 15895:2011+A1:2018 Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools
I.S. EN ISO 11148-6:2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012)
UNE-EN 1829-1:2010 High pressure water jet machines - Safety requirements - Part 1: Machines
UNE-EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
PREN 17125 : DRAFT 2017 DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS
EN 50569:2013/A1:2018 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
PD IEC/TR 60601-4-3:2015 Medical electrical equipment Guidance and interpretation. Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements
PREN 16985 : DRAFT 2016 SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS
UNE-EN 1459-2:2016 Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
UNI EN 1034-16 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
BIS IS/ISO 12643-3 : 2010 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS
ONORM EN 15011 : 2014 CRANES - BRIDGE AND GANTRY CRANES
PREN 1459-1 : DRAFT 2014 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
PREN 50569 : DRAFT 2011 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
NF EN ISO 11148-2 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
UNI EN 13035-7 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
EN 1459-2:2015 Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
ISO 19372:2015 Microturbines applications — Safety
UNE-EN 13135:2013 Cranes - Safety - Design - Requirements for equipment
EN ISO/IEC 80079-38:2016 Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
ISO 10896-1:2012 Rough-terrain trucks Safety requirements and verification Part 1: Variable-reach trucks
ISO 12643-1:2009 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements
IEC 60974-1:2017 Arc welding equipment - Part 1: Welding power sources
IEC 60335-2-28:2002+AMD1:2008 CSV Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines
I.S. EN 60335-2-61:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-61: PARTICULAR REQUIREMENTS FOR THERMAL-STORAGE ROOM HEATERS
ISO 20474-1:2017 Earth-moving machinery — Safety — Part 1: General requirements
I.S. EN 60335-2-43:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-43: PARTICULAR REQUIREMENTS FOR CLOTHES DRYERS AND TOWEL RAILS
DIN EN 13862:2010-03 Floor cutting-off machines - Safety (includes Amendment A1:2009)
EN 60335-2-16:2003/A2:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002/A2:2011)
I.S. EN 60335-2-44:2002 SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR IRONERS (IEC 60335-2-44:2002 (EQV))
I.S. EN 15094:2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
I.S. EN 60335-2-37:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-37: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DEEP FAT FRYERS
IEC 60335-2-62:2002+AMD1:2008 CSV Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks
ISO 28139:2009 Agricultural and forestry machinery Knapsack combustion-engine-driven mistblowers Safety requirements
IEC 60335-2-59:2002+AMD1:2006+AMD2:2009 CSV Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers
I.S. EN 60335-2-80:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS
IEC 60335-2-73:2002+AMD1:2006+AMD2:2009 CSV Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters
DIN EN 12828:2014-07 HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
BS EN 267 : 2009 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 12750:2013-05 Safety of woodworking machines - Four sided moulding machines
DIN EN 1247:2010-12 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines (includes Amendment A1:2010)
DIN EN 1953:2013-12 ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 12348:2010-01 Core drilling machines on stand - Safety (includes Amendment A1:2009)
DIN EN 12853:2012-02 Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12622:2014-02 Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013)
DIN EN 12547:2014-12 CENTRIFUGES - COMMON SAFETY REQUIREMENTS
DIN EN 12649:2011-09 Concrete compactors and smoothing machines - Safety
DIN EN 1679-1:2011-09 Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines
DIN EN 13020:2016-02 ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS
DIN EN 13113:2011-05 Tannery machines - Roller coating machines - Safety requirements (includes Amendment A1:2010)
DIN EN 13861:2012-01 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
DIN EN ISO 19432 E : 2012 BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012)
DIN EN 422:2009-10 PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
DIN EN 454:2015-02 Food processing machinery - Planetary mixers - Safety and hygiene requirements
DIN EN 285:2016-05 Sterilization - Steam sterilizers - Large sterilizers
DIN EN 676:2012-03 (Draft) AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 15067 E : 2008 PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS
DIN EN 931:2010-07 Footwear manufacturing machines - Lasting machines - Safety requirements (includes Amendment A2:2009)
DIN EN 741:2011-06 Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials (includes Amendment A1:2010)
DIN EN 14673:2010-10 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010)
DIN EN 12043:2015-02 FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13042-3 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
I.S.EN ISO 8528-13:2016&LC:2016 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO/DIS 8528-13:2014)
UNE-EN 15954-2:2014 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
UNE-EN 62271-202:2015 High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation
BS EN 1417:2014 Plastics and rubber machines. Two-roll mills. Safety requirements
UNE-EN 1889-1:2012 Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
UNE-EN 15955-2:2014 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
BS EN 13135-2 : 2004 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
BS EN 746-1 : 1997 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
ISO 9241-410:2008 Ergonomics of human-system interaction Part 410: Design criteria for physical input devices
BS EN 1010-1 : 2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
09/30182290 DC : 0 BS EN 746-1:1997/A1 - INDUSTRIAL THERMO PROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMO PROCESSING EQUIPMENT
UNE-EN 1856-1:2010 Chimneys - Requirements for metal chimneys - Part 1: System chimney products
IEC 62135-1:2015 Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation
BS EN ISO 11681-1:2011 Machinery for forestry. Portable chain-saw safety requirements and testing Chain-saws for forest service
ISO 11148-4:2012 Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools
UNE-EN 1012-1:2011 Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
DIN EN 14957:2010-11 Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements (includes Amendment A1:2010)
IEC 60335-2-48:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters
DIN EN 1889-1:2011-10 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
BS EN 12151:2007 Machinery and plants for the preparation of concrete and mortar. Safety requirements
BS EN 741 : 2000 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS
BS EN 809 : 1998 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
BS EN 12649 : 2008 CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
BS EN 1539:2015 Dryers and ovens, in which flammable substances are released. Safety requirements
DIN EN 676:2008-11 Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008)
ISO 8528-13:2016 Reciprocating internal combustion engine driven alternating current generating sets — Part 13: Safety
EN 60335-2-61 : 2003 AMD 2 2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-61: PARTICULAR REQUIREMENTS FOR THERMAL-STORAGE ROOM HEATERS
EN 60335-2-85:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-85: PARTICULAR REQUIREMENTS FOR FABRIC STEAMERS
UNI EN 267 : 2011 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
EN ISO 8528-13:2016 Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15)
CEI EN 60519-1 : 2016 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
EN 60335-2-28:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES
DIN EN ISO 11681-2:2017-10 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011 + Amd 1:2017) (includes Amendment A1:2017)
EN 809 : 1998 COR 2010 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
EN 60335-2-98:2003/A2:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-98: PARTICULAR REQUIREMENTS FOR HUMIDIFIERS
UNE-EN 60335-2-24:2011 Household and similar electrical appliances - Safety -- Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
EN 809:1998+A1:2009 Pumps and pump units for liquids - Common safety requirements
EN 50155:2017 Railway applications - Rolling stock - Electronic equipment
UNE-EN 60335-2-97:2007 Household and similar electrical appliances - Safety -- Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment (IEC 60335-2-97:2002, modified + A1:2004, modified).
EN 60335-2-43:2003/A2:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-43: PARTICULAR REQUIREMENTS FOR CLOTHES DRYERS AND TOWEL RAILS
DIN EN 957-5:2009-07 STATIONARY TRAINING EQUIPMENT - PART 5: STATIONARY EXERCISE BICYCLES AND UPPER BODY CRANK TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
EN 618:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)
EN ISO 19432:2012 Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012)
EN 12629-7:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products
EN 13886:2005+A1:2010 Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements
UNI EN 1856-1 : 2009 CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS
UNI EN 12001 : 2012 CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
UNI EN 13379 : 2013 PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1012-1 : 2010 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS
UNI EN 14677 : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
UNI EN 1010-1 : 2011 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
UNI EN 14710-1 : 2009 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS
UNI EN 1889-1 : 2011 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
UNI EN 13042-1 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
UNI EN 809 : 2009 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
UNI EN 619 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF UNIT LOADS
UNI EN 12203 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
UNI EN 13113 : 2010 TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
UNI EN 13135-2 : 2010 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
UNI EN 14957 : 2010 FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1679-1 : 2011 RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
UNI EN 972 : 2010 TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS
ONORM EN 16228-1 : 2014 DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
UNI EN 13886 : 2010 FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 614-1 : 2009 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
UNI EN 13862 : 2009 FLOOR CUTTING-OFF MACHINES - SAFETY
UNI EN 15027 : 2009 TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
UNI EN 15954-2 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 12750 : 2013 SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
EN 617:2001+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
UNI EN 1114-1 : 2011 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
UNI EN 14673 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
UNI EN 1845 : 2008 FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 15061 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
UNI EN 617 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS
UNI EN 415-6 : 2013 SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES
UNI EN 13457 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
UNI EN 12649 : 2011 CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
UNI EN 12653 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
UNI EN 957-5 : 2009 STATIONARY TRAINING EQUIPMENT - PART 5: STATIONARY EXERCISE BICYCLES AND UPPER BODY CRANK TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
UNI EN 13389 : 2010 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 15067 : 2008 PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS
UNI EN 12547 : 2014 CENTRIFUGES - COMMON SAFETY REQUIREMENTS
UNI EN 201 : 2010 PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 13378 : 2013 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1012-3 : 2014 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
UNI EN 12312-2 : 2014 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 2: CATERING VEHICLES
ONORM EN 13862 : 2009 FLOOR CUTTING-OFF MACHINES - SAFETY
UNI EN 13861 : 2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
ONORM EN 619 : 2011
ONORM EN 15093 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
UNI EN ISO 14505-2 : 2007 ERGONOMICS OF THE THERMAL ENVIRONMENT - EVALUATION OF THERMAL ENVIRONMENTS IN VEHICLES - PART 2: DETERMINATION OF EQUIVALENT TEMPERATURE
UNI EN 618 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF BULK MATERIALS EXCEPT FIXED BELT CONVEYORS
UNI EN 13042-3 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
UNI EN 12601 : 2011 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
UNI EN ISO 11681-1 : 2012 MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 1: CHAIN-SAWS FOR FOREST SERVICE
UNI EN 1915-1 : 2014 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
UNI EN 12043 : 2015 FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN ISO 19432 : 2013 BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS
UNI EN 14656 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
UNI EN 12418 : 2009 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
UNI EN 14985 : 2012 CRANES - SLEWING JIB CRANES
EN 1034-27:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems
UNI EN 1953 : 2013 Atomising and spraying equipment for coating materials - Safety requirements
UNI EN 454 : 2015 FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12409 : 2011 PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
UNI EN 1247 : 2010 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
UNI EN 836 : 2011 GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY
UNI EN 931 : 2010 FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
UNI EN 12629-7 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS
UNI EN 13000 : 2014 CRANES - MOBILE CRANES
UNI EN 1777 : 2010 HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
UNI EN 869 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS
UNI EN 14492-2 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
UNI EN 12111 : 2014 TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
UNI EN 13289 : 2013 PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 14180 : 2014 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
UNI EN 12182 : 2012 ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS
UNI EN 15955-2 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 12348 : 2009 CORE DRILLING MACHINES ON STAND - SAFETY
BS EN 1247 : 2004 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
UNI EN 422 : 2009 PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 741 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS
UNI EN 12828 : 2014 HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
UNI EN 289 : 2014 PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 13675 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
UNI EN 676 : 2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
ONORM EN 12418 : 2009 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
UNI EN 14681 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
UNI EN 12622 : 2014 SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
UNI EN 746-1 : 2009 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
DIN EN ISO 11148-6:2013-05 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012)
CSA E60974.1 : 2012 ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
DIN EN 13035-7:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass (includes Amendment A1:2009)
09/30183554 DC : 0 BS EN ISO 11148-8 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
DIN EN 1034-16:2012-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
07/30172312 DC : 0 BS EN 60335-2-43 AMD2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-43: PARTICULAR REQUIREMENTS FOR CLOTHES DRYERS AND TOWEL RAILS
DIN EN ISO/IEC 80079-38 E : 2017 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
09/30175681 DC : 0 BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
UNE-EN 12312-6:2017 Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment
I.S. EN 13035-7:2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
BS EN 1034-8:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Refining plants
ISO 80601-2-61:2017 Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
ISO 16092-1:2017 Machine tools safety — Presses — Part 1: General safety requirements
BS EN 80601-2-60:2015 Medical electrical equipment Particular requirements for the basic safety and essential performance of dental equipment
BS EN 14989-2:2007 Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications Flue and air supply ducts for room sealed appliances
16/30342849 DC : 0 BS EN 12733 - AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
I.S. EN ISO 11148-9:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS (ISO 11148-9:2011)
I.S. EN 60335-2-75:2004 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES
13/30272402 DC : 0 BS EN 16475-3 - CHIMNEYS - ACCESSORIES - PART 3: DRAUGHT REGULATORS AND STANDSTILL OPENING DEVICES - REQUIREMENTS AND TEST METHODS
PREN 17180 : DRAFT 2017 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING
11/30240282 DC : DRAFT MAR 2011 BS EN 12828 - HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
BS ISO 19224:2017 Continuous surface miners (CSM). Safety requirements
CSA E60335.2.82 : 2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES
DIN EN 16647:2016-04 FIREPLACES FOR LIQUID FUELS - DECORATIVE APPLIANCES PRODUCING A FLAME USING ALCOHOL BASED OR GELATINOUS FUEL - USE IN PRIVATE HOUSEHOLDS
I.S. EN 12601:2010 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
08/30182786 DC : DRAFT JULY 2008 BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
07/30165120 DC : 0 BS EN 60335-2-82 AMD1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES
I.S. EN 16647:2015 FIREPLACES FOR LIQUID FUELS - DECORATIVE APPLIANCES PRODUCING A FLAME USING ALCOHOL BASED OR GELATINOUS FUEL - USE IN PRIVATE HOUSEHOLDS
DIN EN ISO 20957-5:2015-09 (Draft) STATIONARY TRAINING EQUIPMENT - PART 5: STATIONARY EXERCISE BICYCLES AND UPPER BODY CRANK TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-5:2016)
DIN EN ISO 11148-4:2013-05 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012)
12/30239867 DC : 0 BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
CAN/CSA-E60335-2-3:13 Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons (Adopted IEC 60335-2-3:2002, edition 5:2002 consolidated with amendment 1:2004 and amendment 2:2008, with Canadian deviations) | Appareils électrodomestiques et analogues - Sécurité - Partie 2-3: Règles particulières pour les fers à repasser électriques (norme CEI 60335:2002 adoptée, edition 5:2002 consolidée par amendement 1:2004 et amendement 2:2008, avec exigencies propres au Canada)
PREN 12013 : DRAFT 2015 PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
UNI EN ISO 28139 : 2010 AGRICULTURAL AND FORESTRY MACHINERY - KNAPSACK COMBUSTION-ENGINE-DRIVEN MISTBLOWERS - SAFETY REQUIREMENTS
13/30255092 DC : 0 BS EN 1417 - PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS
DIN EN ISO 11806-1:2012-05 Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011)
BS EN 15954-2:2013 Railway applications. Track. Trailers and associated equipment General safety requirements
09/30214342 DC : 0 BS EN 60335-2-39 ED 6.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI- PURPOSE COOKING PANS
UNI EN 1034-17 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
04/19987805 DC : 0 BS ISO 14505-1 - ERGONOMICS OF THE THERMAL ENVIRONMENT - EVALUATION OF THERMAL ENVIRONMENT IN VEHICLES - PART 1: PRINCIPLES AND METHODS FOR ASSESSMENT OF THERMAL STRESS
UNI EN ISO 11806-1 : 2012 AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE
07/30165088 DC : 0 BS EN 60335-2-3 AMD 2 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-3: PARTICULAR REQUIREMENTS FOR ELECTRIC IRONS
16/30291994 DC : 0 BS EN ISO 19225 - UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
08/30195172 DC : DRAFT DEC 2008 BS EN 60335-2-13/ED 6.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-13: PARTICULAR REQUIREMENTS FOR DEEP FAT FRYERS, FRYING PANS AND SIMILAR APPLIANCES
10/30211872 DC : 0 BS EN 12001 - CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
14/30302903 DC : 0 BS EN 16774 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
12/30258809 DC BS EN 60335-2-41. Household and similar electrical appliances. Safety. Part 2-41. Particular requirements for pumps
BS EN ISO 11148-6:2012 Hand-held non-electric power tools. Safety requirements Assembly power tools for threaded fasteners
13/30288591 DC : 0 BS EN 60974-1 - ARC WEDLING EQUIPMENT - PART 1: WELDING POWER SOURCE
09/30180832 DC : DRAFT AUG 2009 BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT
08/30195110 DC : DRAFT DEC 2008 BS EN 60335-2-27 ED5 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-27: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN EXPOSURE TO ULTRAVIOLET AND INFRARED RADIATION
08/30190505 DC : 0 BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS EN 60335-2-109:2010 Household and similar electrical appliances. Safety Particular requirements for UV radiation water treatment appliances
07/30172338 DC : DRAFT DEC 2007 BS EN 1114-1 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
07/30172289 DC : 0 BS EN 60335-2-102 AMD1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-102: PARTICULAR REQUIREMENTS FOR GAS, OIL AND SOLID-FUEL BURNING APPLIANCES HAVING ELECTRICAL CONNECTIONS
BS ISO 12643-1:2009 Graphic technology. Safety requirements for graphic technology equipment and systems General requirements
BS EN 415-10:2014 Safety of packaging machines General Requirements
EN 1034-1:2000+A1:2010 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
UNI EN 1501-3 : 2008 REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
DIN EN 14033-3:2014-08 (Draft) RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
14/30257546 DC : 0 BS ISO 17966 - ASSISTIVE PRODUCTS FOR PERSONAL HYGIENE THAT SUPPORT USERS - REQUIREMENTS AND TEST METHODS
07/30165103 DC : 0 BS EN 60335-2-52 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-52: PARTICULAR REQUIREMENTS FOR ORAL HYGIENE APPLIANCES
UNI EN 1829-1 : 2010 HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
12/30255089 DC : 0 BS EN 16474 - PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
15/30302205 DC : DRAFT FEB 2015 BS EN ISO 19296 - MINING AND EARTHMOVING MACHINERY - MOBILE MACHINES WORKING UNDERGROUND - MACHINE SAFETY
DIN EN 1034-17 E : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
10/30182320 DC : 0 BS EN 1679-1:1998/A1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
BS EN 16327:2014 Fire-fighting. Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
PREN 15180 : DRAFT 2011 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
07/30165084 DC : 0 BS EN 60335-2-28 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES
09/30179773 DC : 0 BS EN 12387:2005/A1 - FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
PREN 676 : DRAFT 2012 FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
14/30279065 DC : 0 BS EN ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS
BS EN 15949:2012 Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills
BS EN 60335-2-81 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-81: PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS
BS EN ISO 11148-7:2012 Hand-held non-electric power tools. Safety requirements Grinders
DIN EN 1034-17:2012-11 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines
I.S. EN 60335-2-97:2007 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-97: PARTICULAR REQUIREMENTS FOR DRIVES FOR ROLLING SHUTTERS, AWNINGS, BLINDS AND SIMILAR EQUIPMENT
09/30199945 DC : 0 BS EN 61010-2-092 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-092: PARTICULAR REQUIREMENTS FOR EQUIPMENT RATED FOR USE BY CHILDREN AND YOUNG PEOPLE IN EDUCATIONAL ESTABLISHMENTS
DIN EN 16500:2014-10 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
07/30165092 DC : 0 BS EN 60335-2-44 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-44: PARTICULAR REQUIREMENTS FOR IRONERS
DIN EN 1034-27 E : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
BS ISO 26322-1:2008 Tractors for agriculture and forestry. Safety Standard tractors
11/30251974 DC : 0 BS EN 15180 - FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 15955-2:2013 Railway applications. Track. Demountable machines and associated equipment General safety requirements
I.S. EN 14753:2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
BS EN 1034-27:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Roll handling systems
07/30165063 DC : 0 BS EN 60335-2-10 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-10 - PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES
07/30165111 DC : 0 BS EN 60335-2-56 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-56: PARTICULAR REQUIREMENTS FOR PROJECTORS AND SIMILAR APPLIANCES
07/30172320 DC : 0 BS EN 60335-2-61 AMD2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-61: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR THERMAL STORAGE ROOM HEATERS
PREN 13525 : DRAFT 2016 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
I.S. EN ISO 19225:2017 UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS (ISO 19225:2017)
I.S. EN ISO 14505-2:2006 ERGONOMICS OF THE THERMAL ENVIRONMENT - EVALUATION OF THERMAL ENVIRONMENTS IN VEHICLES - PART 2: DETERMINATION OF EQUIVALENT TEMPERATURE
08/30195118 DC : DRAFT DEC 2008 BS EN 60335-2-30 ED5 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-30: PARTICULAR REQUIREMENTS FOR ROOM HEATERS
DIN EN 16500 E : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
PREN 378-2 : DRAFT 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
CSA E60335-2-61 : 2011 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-61: PARTICULAR REQUIREMENTS FOR THERMAL STORAGE ROOM HEATERS
DIN EN 15061 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
DIN EN 15093 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
BS EN 60335-2-49 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-49: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC APPLIANCES FOR KEEPING FOOD AND CROCKERY WARM
DIN EN ISO 8230-1:2009-05 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
BS EN 16774:2016 Safety of machinery. Safety requirements for steel converter and associated equipment
DIN EN 1034-26:2012-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
DIN EN 15166 E : 2010 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 11148-10:2012-06 Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011)
ISO 12648:2006 Graphic technology Safety requirements for printing press systems
UNE-EN ISO 19932-1:2014 Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013)
DIN EN ISO 28139:2010-05 Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements (ISO 28139:2009)
CSA C22.2 No. 0 : 2010 : FR GENERAL REQUIREMENTS - CANADIAN ELECTRICAL CODE, PART 2
CSA E60335.2.13 :2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-13: PARTICULAR REQUIREMENTS FOR DEEP FAT FRYERS, FRYING PANS AND SIMILAR APPLIANCES
BS EN 60335-2-66 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-66: PARTICULAR REQUIREMENTS FOR WATER-BED HEATERS
CSA E60335.2.3 : 2013 : R2018 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-3: PARTICULAR REQUIREMENTS FOR ELECTRIC IRONS
UNE-EN 60335-2-13:2010 Household and similar electrical appliances - Safety -- Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
CSA E60335.2.43 : 2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY - PART 2-43: PARTICULAR REQUIREMENTS FOR CLOTHES DRYERS AND TOWEL RAILS
BS EN 60335-2-55 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-55: PARTICULAR REQUIREMENTS FOR ELECTRICAL APPLIANCES FOR USE WITH AQUARIUMS AND GARDEN PONDS
UNI EN ISO 11148-11 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
ISO 12643-2:2010 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems
UNE-EN 1672-1:2015 Food processing machinery - Basic concepts - Part 1: Safety requirements
I.S. EN 60335-2-10:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES
I.S. EN 1034-27:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
EN 1459-1:2017 Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks
I.S. EN ISO 19932-1:2013 EQUIPMENT FOR CROP PROTECTION - KNAPSACK SPRAYERS - PART 1: SAFETY AND ENVIRONMENTAL REQUIREMENTS (ISO 19932-1:2013)
BS EN 60335-2-16 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS
BS EN 60335-2-41 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS
I.S. EN 60335-2-30:2009 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-30: PARTICULAR REQUIREMENTS FOR ROOM HEATERS (IEC 60335-2-30:2009 (EQV))
PREN 13378 : DRAFT 2016 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
ISO 14990-1:2016 Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General requirements
BS EN ISO 9241-410 : 2008 ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 410: DESIGN CRITERIA FOR PHYSICAL INPUT DEVICES
BS EN 60335-2-14 : 2006 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-14: PARTICULAR REQUIREMENTS FOR KITCHEN MACHINES
I.S. EN 16228-1:2014 DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
BS EN 60335-2-28 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES
I.S. EN 60335-2-38:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS
I.S. EN 16191:2014 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
UNI EN ISO 11148-3 : 2013 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
I.S. EN ISO/IEC 80079-38:2016 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012)
CEN ISO/TR 22100-1:2017 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2015)
I.S. EN 60335-2-12:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES
I.S. EN ISO 20957-5:2016 STATIONARY TRAINING EQUIPMENT - PART 5: STATIONARY EXERCISE BICYCLES AND UPPER BODY CRANK TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 8528-13:2016 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO/DIS 8528-13:2014)
I.S. EN 15287-2:2008 CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 2: CHIMNEYS FOR ROOMSEALED APPLIANCES
EN 378-2:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
CSA C22.2 No. 60335-2-52 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-52: PARTICULAR REQUIREMENTS FOR ORAL HYGIENE APPLIANCES
16/30335146 DC : 0 BS EN 16985 - SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 12013:2018 Plastics and rubber machines. Internal mixers. Safety requirements
16/30344387 DC : 0 BS EN 16475-1 - CHIMNEYS - ACCESSORIES - PART 1: CHIMNEY SILENCERS - REQUIREMENTS AND TEST METHODS
PD CEN ISO/TR 22100-1:2017 Safety of machinery. Relationship with ISO 12100 How ISO 12100 relates to type-B and type-C standards
CSA C22.2 No. 0 : 2010 : INC : UPD 2 : 2014 GENERAL REQUIREMENTS - CANADIAN ELECTRICAL CODE, PART 2
I.S. EN 12013:2018 PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
IEC 62888-1:2018 Railway applications - Energy measurement on board trains - Part 1: General
PREN 13020 : DRAFT 2014 ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS
PREN 454 : DRAFT 2011 FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 60335-2-14:2006 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-14: PARTICULAR REQUIREMENTS FOR KITCHEN MACHINES (IEC 60335-2-14:2006 (MOD))
ISO/TR 22100-1:2015 Safety of machinery Relationship with ISO 12100 Part 1: How ISO 12100 relates to type-B and type-C standards
I.S. EN 60335-2-36:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-36: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC COOKING RANGES, OVENS, HOBS AND HOB ELEMENTS (IEC 60335-2-36:2002)
DIN EN 13135:2013-05 CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
ISO 14885:2014 Large yachts Diesel engines for main propulsion and essential auxiliaries Safety requirements
ISO 12643-3:2010 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems
EN 60335-2-48 : 2003 AMD 11 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRILLERS AND TOASTERS (IEC 60335-2-48:2002)
I.S. EN 60335-2-45:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES (IEC 60335-2-45:2002 (EQV))
EN 60335-2-49:2003/A11:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-49: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC APPLIANCES FOR KEEPING FOOD AND CROCKERY WARM (IEC 60335-2-49:2002)
I.S. EN 60335-2-84:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS
I.S. EN 62135-1:2015 RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION
I.S. EN 60335-2-49:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-49: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC APPLIANCES FOR KEEPING FOOD AND CROCKERY WARM (IEC 60335-2-49:2002 (EQV))
I.S. EN 60335-2-41:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS
IEC 60335-2-39:2012+AMD1:2017 CSV Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
I.S. EN 60335-2-71:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS
I.S. EN 15011:2011 CRANES - BRIDGE AND GANTRY CRANES
IEC 60335-2-74:2002+AMD1:2006+AMD2:2009 CSV Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters
I.S. EN 60335-2-87:1999 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-87: PARTICULAR REQUIREMENTS FOR ELECTRIC ANIMAL-STUNNING EQUIPMENT
DIN EN 14985:2012-05 Cranes - Slewing jib cranes
I.S. EN 60335-2-29:2004 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29: PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS
I.S. EN 60335-2-58:2005 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES
I.S. EN 15166:2008 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
IEC 60335-2-85:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers
EN 60335-2-82:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES
EN 60335-2-59:2003/A2:2009 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS
UNE-EN 1915-1:2013 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
EN 60335-2-105 : 2005 AMD 11 2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-105: PARTICULAR REQUIREMENTS FOR MULTIFUNCTIONAL SHOWER CABINETS
I.S. EN 267:2009 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
EN 60335-2-87:2002/A1:2007 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-87: PARTICULAR REQUIREMENTS FOR ELECTRIC ANIMAL-STUNNING EQUIPMENT
DIN EN 14681 E : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
DIN EN 809:2012-10 Pumps and pump units for liquids - Common safety requirements
DIN EN 13732:2013-10 Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene
DIN EN 14180:2014-09 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
DIN EN 201:2010-02 PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
DIN EN 972:2011-07 Tannery machines - Reciprocating roller machines - Safety requirements (includes Amendment A1:2010)
DIN EN 14673 E : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
DIN EN 618:2011-06 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
DIN EN 13886:2011-02 Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 617:2011-06 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers (includes Amendment A1:2010)
DIN EN 1114-1:2012-01 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
DIN EN 14656 E : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
DIN EN 12629-7:2011-03 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products (includes Amendment A1:2010)
DIN EN 836:2012-07 GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY
BS EN 12312-2:2014 Aircraft ground support equipment. Specific requirements Catering vehicles
PD IEC/TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children
BS EN 12547:2014 Centrifuges. Common safety requirements
14/30297343 DC : 0 BS EN ISO 8528-13 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY
ISO 8230-1:2008 Safety requirements for dry-cleaning machines Part 1: Common safety requirements
UNE-EN ISO 8528-13:2017 Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15)
ISO 11148-6:2012 Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for threaded fasteners
IEC 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
13/30277685 DC : 0 BS EN 60519-1 - SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
ISO 11148-1:2011 Hand-held non-electric power tools Safety requirements Part 1: Assembly power tools for non-threaded mechanical fasteners
ISO 19432:2012 Building construction machinery and equipment Portable, hand-held, internal combustion engine driven cut-off machines Safety requirements
BS EN 13675 : 2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
BS EN 13389 : 2005 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
ISO 19932-1:2013 Equipment for crop protection Knapsack sprayers Part 1: Safety and environmental requirements
UNE-EN 12601:2011 Reciprocating internal combustion engine driven generating sets - Safety
BS EN 869 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS
ISO 28803:2012 Ergonomics of the physical environment — Application of International Standards to people with special requirements
IEC TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children
IEC 80601-2-60:2012 Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
IEC 60335-2-26:2002+AMD1:2008 CSV Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks
UNE-EN 16228-1:2015 Drilling and foundation equipment - Safety - Part 1: Common requirements
BS EN 957-5:2009 Stationary training equipment Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods
BS EN 619 : 2002
BS EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing
UNE-EN 13524:2003 Highway maintenance machines - Safety requirements
BS EN 13289 : 2001 PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 14710-1 : 2005 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS
UNE-EN 741:2000 Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials
UNE-EN ISO 11681-1:2012 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011)
BS EN 931 : 1998 FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
UNE-EN 12649:2009 Concrete compactors and smoothing machines - Safety
BS EN 201:2009 Plastics and rubber machines. Injection moulding machines. Safety requirements
UNE-EN 1539:2010 Dryers and ovens, in which flammable substances are released - Safety requirements
BS EN 13042-1 : 2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
BS EN 1111:2017 Sanitary tapware. Thermostatic mixing valves (PN 10). General technical specification
UNE-EN ISO 11681-2:2012 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011)
EN 80601-2-60:2015 Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
ISO 11148-2:2011 Hand-held non-electric power tools Safety requirements Part 2: Cutting-off and crimping power tools
UNE-EN 12001:2013 Conveying, spraying and placing machines for concrete and mortar - Safety requirements
BS EN 13021 : 2003 WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
BS EN ISO 8528-13:2016 Reciprocating internal combustion engine driven alternating current generating sets Safety
ISO 11148-9:2011 Hand-held non-electric power tools Safety requirements Part 9: Die grinders
BS ISO 19372:2015 Microturbines applications. Safety
UNE-EN 12622:2011 Safety of machine tools - Hydraulic press brakes
IEC 60335-2-61:2002+AMD1:2005+AMD2:2008 CSV Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal storage room heaters
IEC 60335-2-51:2002+AMD1:2008+AMD2:2011 CSV Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
ISO 11148-8:2011 Hand-held non-electric power tools Safety requirements Part 8: Sanders and polishers
IEC 60335-2-30:2009+AMD1:2016 CSV Household and similar electrical appliances - Safety -Part 2-30:Particular requirements for room heaters
IEC 60335-2-42:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
UNE-EN 415-6:2014 Safety of packaging machines - Part 6: Pallet wrapping machines
BS EN 14985:2012 Cranes. Slewing jib cranes
BS EN 12348 : 2000 CORE DRILLING MACHINES ON A STAND - SAFETY
IEC 60335-2-44:2002+AMD1:2008+AMD2:2011 CSV Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers
UNE-EN 454:2015 Food processing machinery - Planetary mixers - Safety and hygiene requirements
BS EN 972 : 1998 TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS
UNE-EN ISO 19432:2013 Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012)
ISO 23125:2015 Machine tools Safety Turning machines
ISO 14505-2:2006 Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 2: Determination of equivalent temperature
ISO 11148-11:2011 Hand-held non-electric power tools Safety requirements Part 11: Nibblers and shears
IEC TS 62933-5-1:2017 Electrical energy storage (EES) systems - Part 5-1: Safety considerations for grid-integrated EES systems - General specification
ISO 11680-1:2011 Machinery for forestry Safety requirements and testing for pole-mounted powered pruners Part 1: Machines fitted with an integral combustion engine
UNE-EN 12750:2013 Safety of woodworking machines - Four sided moulding machines
ISO/TR 22411:2008 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
ISO 11681-2:2011 Machinery for forestry Portable chain-saw safety requirements and testing Part 2: Chain-saws for tree service
BS EN 12750:2013 Safety of woodworking machines. Four sided moulding machines
BS EN 285:2015 Sterilization. Steam sterilizers. Large sterilizers
IEC 60335-2-52:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances
IEC 60335-2-98:2002+AMD1:2004+AMD2:2008 CSV Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers
IEC 60335-2-49:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm
IEC 60335-2-45:2002+AMD1:2008+AMD2:2011 CSV Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
IEC 60335-2-96:2002+AMD1:2003+AMD2:2008 CSV Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating
09/30203113 DC : 0 BS EN 4666 - AEROSPACE SERIES - AIRCRAFT INTEGRATED AIR QUALITY AND PRESSURE STANDARDS, CRITERIA AND DETERMINATION METHODS
ISO 11148-5:2011 Hand-held non-electric power tools Safety requirements Part 5: Rotary percussive drills
IEC 60335-2-106:2007 Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings
BS EN 422:2009 Plastics and rubber machines. Blow moulding machines. Safety requirements
IEC 60335-2-38:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills
UNE-EN 60335-2-54:2009 Household and similar electrical appliances - Safety -- Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam
ISO 18217:2015 Safety of woodworking machines Edge-banding machines fed by chain(s)
UNE EN 15287-1 : 0 CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
UNE-EN 619:2003 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads.
ISO 20957-5:2016 Stationary training equipment — Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods
IEC 62271-202:2014 High-voltage switchgear and controlgear - Part 202: High-voltage/ low-voltage prefabricated substation
11/30232911 DC : 0 BS ISO 13577-1 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE-EN 617:2002 Continuous handling equipment and systems- Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers.
UNE-EN 50571:2014 Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines
BS EN 15027 : 2007 TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
BS EN 14180:2014 Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing
EN 60335-2-27:2013 Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
BS EN 378-2:2016 Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation
BS EN 676 : 2003 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
BS ISO 14990-1:2016 Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements
BS EN 15011 : 2011 CRANES - BRIDGE AND GANTRY CRANES
UNE-EN 60335-2-4:2010 Household and similar electrical appliances - Safety -- Part 2-4: Particular requirements for spin extractors
UNE-EN 12409:2009 Plastics and rubber machines - Thermoforming machines - Safety requirements
13/30280751 DC : 0 BS EN 4666 - AEROSPACE SERIES - AIRCRAFT INTEGRATED AIR QUALITY AND PRESSURE STANDARDS, CRITERIA AND DETERMINATION METHODS
UNE-EN 13000:2010 Cranes - Mobile cranes
ISO 11148-7:2012 Hand-held non-electric power tools — Safety requirements — Part 7: Grinders
ISO 11148-10:2011 Hand-held non-electric power tools Safety requirements Part 10: Compression power tools
DIN EN ISO 19432:2012-12 BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012)
10/30218104 DC : 0 BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES
UNE-EN 15059:2009 Snow grooming equipment - Safety requirements
IEC TR 62368-2:2015 Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 62368-1
BS EN 13113 : 2002 TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
UNE-EN 1247:2005 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines
UNE-EN 60335-2-29:2006 Household and similar electrical appliances - Safety -- Part 2-29: Particular requirements for battery chargers
IEC 60335-2-65:2002+AMD1:2008+AMD2:2015 CSV Household and similar electrical appliances - Safety - Part 2-65:Particular requirements for air-cleaning appliances
BS EN 536:2015 Road construction machines. Mixing plants for road construction materials. Safety requirements
BS EN 15284:2007 Materials and articles in contact with food stuffs. Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware
UNE-EN 13389:2006 Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements.
BS EN 1287:2017 Sanitary tapware. Low pressure thermostatic mixing valves. General technical specification
UNE-EN 618:2002 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors.
UNE-EN 50570:2014 Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers
UNE-EN 13113:2002 Tannery machines - Roller coating machines - Safety requirements.
BS EN 12182:2012 Assistive products for persons with disability. General requirements and test methods
UNE-EN 1114-1:2012 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
UNI EN ISO 11680-1 : 2012 MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE
EN 60335-2-13:2010/A11:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-13: PARTICULAR REQUIREMENTS FOR DEEP FAT FRYERS, FRYING PANS AND SIMILAR APPLIANCES (IEC 60335-2-13:2009)
EN 15954-2:2013 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
EN 1417:2014 Plastics and rubber machines - Two-roll mills - Safety requirements
EN 741:2000+A1:2010 Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials
EN 16774:2016 Safety of machinery - Safety requirements for steel converter and associated equipment
EN ISO 11148-8:2011 Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011)
EN 1570-1:2011+A1:2014 Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings
EN 536:2015 Road construction machines - Mixing plants for road construction materials - Safety requirements
EN 15774:2010 Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements
EN 415-10:2014 Safety of packaging machines - Part 10: General Requirements
EN 201:2009 Plastics and rubber machines - Injection moulding machines - Safety requirements
EN 15067:2007 Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements
ONORM EN 12750 : 2013 SAFETY OF WOODWORKING MACHINES - FOUR-SIDED MOULDING MACHINES
EN 15955-2:2013 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
EN 15061:2007+A1:2008 Safety of machinery - Safety requirements for strip processing line machinery and equipment
EN 13675:2004+A1:2010 Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment
EN 15284:2007 Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastics cookware
EN ISO 11681-1:2011 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011)
EN 13861:2011 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
EN 14656:2006+A1:2010 Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals
EN 422:2009 Plastics and rubber machines - Blow moulding machines - Safety requirements
EN 15027:2007+A1:2009 Transportable wall saw and wire saw equipment for job site - Safety
EN 14989-2:2007 Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances
EN 1915-1:2013 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
EN 415-8:2008 Safety of packaging machines - Part 8: Strapping machines
EN 14985:2012 Cranes - Slewing jib cranes
EN 15094:2008 Safety of Machinery - Safety requirements for cold flat rolling mills
EN ISO 11148-7:2012 Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012)
EN ISO 20957-5:2016 Stationary training equipment - Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods (ISO 20957-5:2016)
UNI EN 13021 : 2009 WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
EN 16647:2015 Fireplaces for liquid fuels - Decorative appliances producing a flame using alcohol based or gelatinous fuel - Use in private households
EN ISO 11148-6:2012 Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)
EN 1672-1:2014 Food processing machinery - Basic concepts - Part 1: Safety requirements
EN 15287-2:2008 Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for roomsealed appliances
EN 619:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
EN ISO 11148-4:2012 Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012)
EN ISO 11148-12:2012 Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)
EN ISO 14505-2:2006/AC:2009 Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature (ISO 14505-2:2006/Cor 1:2007)
EN ISO 11148-2:2011 Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011)
EN 16282-5:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 5: Air duct; Design and dimensioning
UNI EN 13524 : 2014 HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
EN ISO 28803:2012 Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO 28803:2012)
EN 14957:2006+A1:2010 Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements
EN 15949:2012 Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills
EN ISO 11681-2:2011/A1:2017 MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011/AMD 1:2017)
EN 1539:2015 Dryers and ovens, in which flammable substances are released - Safety requirements
EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
EN 1953:2013 Atomising and spraying equipment for coating materials - Safety requirements
EN 1870-6:2017 Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood
EN 972:1998+A1:2010/AC:2011 TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS
EN 454:2014 Food processing machinery - Planetary mixers - Safety and hygiene requirements
EN ISO 11148-5:2011 Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)
EN 15377-1:2008 Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 1: Determination of the design heating and cooling capacity
EN 15166:2008 Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements
EN 15093:2008 Safety of Machinery - Safety requirements for hot flat rolling mills
EN ISO 11148-1:2011 Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)
EN 16500:2014 Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
EN ISO 4414:2010 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
EN ISO 11148-3:2012 Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012)
EN 14681:2006+A1:2010 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces
EN 1889-1:2011 Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
EN ISO 11148-11:2011 Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)
EN 869:2006+A1:2009 Safety of machinery - Safety requirements for pressure metal diecasting units
EN 15059:2009+A1:2015 Snow grooming equipment - Safety requirements
EN 1845:2007 Footwear manufacturing machines - Footwear moulding machines - Safety requirements
EN 14710-1:2005+A2:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements
UNI EN 13019 : 2009 MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
EN 12828:2012+A1:2014 Heating systems in buildings - Design for water-based heating systems
EN ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
EN 14673:2006+A1:2010 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
EN 1856-1:2009 Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 14033-3:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN ISO 19932-1:2013 Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013)
EN 14753:2007 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
EN 13732:2013 Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene
ONORM EN 13021 : APR 2009 WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
ONORM EN 13524 : 2014 HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
EN 957-5:2009 Stationary training equipment - Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods
EN 14492-2:2006+A1:2009/AC:2010 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN 15861:2012 Food processing machinery - Smokehouses - Safety and hygiene requirements
EN 14180:2014 Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing
EN 14677:2008 Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel
EN 415-6:2013 Safety of packaging machines - Part 6: Pallet wrapping machines
EN 16474:2015 Plastics and rubber machines - Tyre curing machines - Safety requirements
ONORM EN 13019 : APR 2009 MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
EN 16327:2014 Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
EN ISO 11148-10:2011 Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011)
EN 15180:2014 Food processing machinery - Food depositors - Safety and hygiene requirements
EN 289:2014 Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
EN 1679-1:1998+A1:2011 Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines
EN ISO 11148-9:2011 Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011)
EN 13390:2002+A1:2009 Food processing machinery - Pie and tart machines - Safety and hygiene requirements
EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
EN 931:1997+A2:2009 Footwear manufacturing machines - Lasting machines - Safety requirements
EN 836:1997+A4:2011 Garden equipment - Powered lawnmowers - Safety
DIN EN 15287-2:2008-06 Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for roomsealed appliances
I.S. EN 16327:2014 FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
I.S. EN 12012-4:2006 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
ISO 21789:2009 Gas turbine applications — Safety
07/30172281 DC : 0 BS EN 60335-2-80 AMD1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS
09/30179767 DC : 0 BS EN 12653:1999/A2 - FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
06/30157320 DC : 0 BS EN 60335-2-6 AMD 2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR STATIONARY COOKING RANGES, HOBS, OVENS AND SIMILAR APPLIANCES
DIN EN ISO 11148-5:2012-06 Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)
CSA E60335.2.12 : 2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES
UNE-EN ISO 20957-9:2017 Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods (ISO 20957-9:2016)
DIN EN 1034-21:2012-11 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
PD ISO/TS 16976-5:2013 Respiratory protective devices. Human factors Thermal effects
DIN EN ISO 11148-1:2012-06 Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)
CEI EN 60974-1 : 2013 ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
09/30183560 DC : 0 BS ISO 11148-12 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS
UNI EN ISO 11148-7 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
I.S. EN ISO 11148-1:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS (ISO 11148-1:2011)
DIN EN 1570-1 E : 2015 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
IEC 60335-2-108:2008 Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers
BS EN ISO 11148-8:2011 Hand-held non-electric power tools. Safety requirements Sanders and polishers
11/30249219 DC : 0 BS EN 50569 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
15/30264711 DC : 0 BS EN ISO 11148-13 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS
BS EN 1829-1:2010 High pressure water jet machines. Safety requirements Machines
10/30194893 DC : 0 BS EN 13135-2:2004/A1 - CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
I.S. EN 60335-2-106:2007 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-106: PARTICULAR REQUIREMENTS FOR HEATED CARPETS AND FOR HEATING UNITS FOR ROOM HEATING INSTALLED UNDER REMOVABLE FLOOR COVERINGS
I.S. EN ISO 11148-4:2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012)
14/30279071 DC : 0 BS EN ISO 12643-4 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 4: CONVERTING EQUIPMENT AND SYSTEMS
09/30187377 DC : 0 BS ISO 11148-5 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
PD CEN/TR 13387-4:2015 Child use and care articles. General safety guidelines Thermal hazards
BS EN ISO 18217:2015 Safety of woodworking machines. Edge-banding machines fed by chain(s)
11/30244192 DC : 0 BS EN 16282-1 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD
09/30203677 DC : 0 BS ISO 11681-2 - MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE
PREN 13289 : DRAFT 2015 PASTA PROCESSING PLANT - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
12/30260496 DC : 0 BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
CSA C22.2 No. 60335-2-28 : 2016 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES
08/30190508 DC : 0 BS ISO 12643-4 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 4: CONVERTING EQUIPMENT AND SYSTEMS
S.R. CEN/TR 13387-4:2015 CHILD USE AND CARE ARTICLES - GENERAL SAFETY GUIDELINES - PART 4: THERMAL HAZARDS
BS EN 15861:2012 Food processing machinery. Smokehouses. Safety and hygienerequirements
BS EN 1034-26:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Roll packaging machines
14/30302355 DC : 0 BS EN ISO 11553-1 ED.2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS
13/30263819 DC : 0 BS ISO 6966-2 - AIRCRAFT GROUND EQUIPMENT - BASIC REQUIREMENTS - PART 2: SAFETY REQUIREMENTS
09/30187374 DC : 0 BS ISO 11148-2 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
I.S. EN 50463-1:2017 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
BS EN 60335-2-80 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS
BS EN 60335-2-45 : 2002 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES
07/30172324 DC : 0 BS EN 60335-2-96 AMD2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-96: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR FLEXIBLE SHEET HEATING ELEMENTS FOR ROOM HEATING
09/30196808 DC : 0 BS ISO 11806-1 - AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 1: MACHINES WITH INTEGRAL COMBUSTION ENGINE
UNE-EN 60335-2-59:2005 Household and similar electrical appliances - Safety -- Part 2-59: Particular requirements for insect killers
14/30285733 DC : 0 BS EN ISO 16092-1 - MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS
12/30247814 DC : 0 BS EN 1034-27 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
08/30174125 DC : DRAFT SEP 2008 BS EN 12312-2 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 2: CATERING VEHICLES
BS EN ISO 11148-12:2012 Hand-held non-electric power tools. Safety requirements Circular, oscillating and reciprocating saws
17/30358108 DC : 0 BS EN 17125 - DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS
13/30257309 DC : 0 BS EN 1459-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
09/30181670 DC : 0 BS EN 13035-7:2006/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
EN ISO 28139:2009 Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements (ISO 28139:2009)
I.S. EN ISO 28803:2012 ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS (ISO 28803:2012)
ISO 13578:2017 Industrial furnaces and associated processing equipment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces
DIN EN ISO 11148-7:2013-01 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012)
BS ISO 6966-2:2014 Aircraft ground equipment. Basic requirements Safety requirements
07/30165139 DC : 0 BS EN 60335-2-84 AMD1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS
DIN EN ISO 19932-1:2013-12 EQUIPMENT FOR CROP PROTECTION - KNAPSACK SPRAYERS - PART 1: SAFETY AND ENVIRONMENTAL REQUIREMENTS (ISO 19932-1:2013)
CSA C22.2 No. 60335-2-16 : 2016 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS
PD CEN ISO/TR 22411:2011 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities
07/30172273 DC : 0 BS EN 60335-2-14 AMD1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-14: PARTICULAR REQUIREMENTS FOR KITCHEN MACHINES
BS EN ISO 11148-9:2011 Hand-held non-electric power tools. Safety requirements Die grinders
14/30258503 DC : 0 BS EN 14033-3 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
CAN/CSA-C22.2 NO. 60335-2-44:14 (R2018) Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers (Adopted IEC 60335-2-44:2002, edition 3:2002 consolidated with amendment 1:2008 and amendment 2:2011, with Canadian deviations) | Appareils électrodomestiques et analogues - Sécurité - Partie 2-44 : Règles particulières pour les machines à repasser (norme CEI 60335-2-44:2002 adoptée, édition 3:2002 consolidée par l\'amendement 1:2008 et l\'amendement 2:2011, avec exigences propres au Canada)
BS EN 60335-2-30:2009 Household and similar electrical appliances. Safety Particular requirements for room heaters
09/30187383 DC : 0 BS ISO 11148-11 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
BS EN 60335-2-78 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-78: PARTICULAR REQUIREMENTS FOR OUTDOOR BARBECUES
S.R. CEN ISO/TR 22100-1:2017 SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS (ISO/TR 22100-1:2015)
07/30165075 DC : 0 BS EN 60335-2-16 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS
DIN EN 415-8:2011-06 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
DIN EN 15954-2:2013-11 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
BIS IS/ISO 12643-1 : 2009 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
DIN EN 1034-27:2012-12 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems
14/30298247 DC : 0 BS EN 13020 - ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS
06/30157333 DC : 0 BS EN 60335-2-105 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-105: PARTICULAR REQUIREMENTS FOR MULTIFUNCTIONAL SHOWER CABINETS
08/30180969 DC : DRAFT APR 2008 BS EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES
DIN EN 15180 E : 2015 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
BS EN ISO 11148-4:2012 Hand-held non-electric power tools. Safety requirements Non-rotary percussive power tools
BS EN ISO 23125:2015 Machine tools. Safety. Turning machines
11/30245401 DC : 0 BS EN 1034-8 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
DIN EN ISO 19932-1 E : 2013 EQUIPMENT FOR CROP PROTECTION - KNAPSACK SPRAYERS - PART 1: SAFETY AND ENVIRONMENTAL REQUIREMENTS (ISO 19932-1:2013)
07/30172316 DC : 0 BS EN 60335-2-60 AMD2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-60: PARTICULAR REQUIREMENTS FOR WHIRLPOOL BATHS AND WHIRLPOOL SPAS
09/30187380 DC : 0 BS ISO 11148-10 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
08/30195155 DC : DRAFT DEC 2008 BS EN 60335-2-59/A2 ED 3 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS
06/30157324 DC : 0 BS EN 60335-2-23 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE
UNE-EN ISO 18217:2016 Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)
I.S. EN 80601-2-60:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-60: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF DENTAL EQUIPMENT
I.S. EN 60335-2-98:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-98: PARTICULAR REQUIREMENTS FOR HUMIDIFIERS
DIN EN 15094 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
DIN EN 14677 E : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
CSA E60335-2-61 : 2011 : R2016 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-61: PARTICULAR REQUIREMENTS FOR THERMAL STORAGE ROOM HEATERS
EN 60335-2-21:2003/corrigendum Oct. 2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR STORAGE WATER HEATERS
NF EN ISO 11148-8 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
UNE-EN 60335-2-74:2004 Household and similar electrical appliances - Safety -- Part 2-74: Particular requirements for portable immersion heaters
CSA E60335.2.41 : 2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS
BS EN 60335-2-60 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-60: PARTICULAR REQUIREMENTS FOR WHIRLPOOL BATHS AND WHIRLPOOL SPAS
I.S. EN ISO 20957-9:2016 STATIONARY TRAINING EQUIPMENT - PART 9: ELLIPTICAL TRAINERS, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-9:2016)
I.S. EN ISO 9241-410:2008 ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 410: DESIGN CRITERIA FOR PHYSICAL INPUT DEVICES (ISO 9241-410:2008)
I.S. EN 60335-2-105:2005 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-105: PARTICULAR REQUIREMENTS FOR MULTIFUNCTIONAL SHOWER CABINETS
ISO 18758-2:2018 Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements
I.S. EN ISO 11148-7:2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012)
I.S. EN ISO 11148-11:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS (ISO 11148-11:2011)
I.S. EN 1034-8:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
I.S. EN 60335-2-82:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES
I.S. EN 415-8:2008 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
UNI ISO/TR 14121-2 : 2013 SAFETY OF MACHINERY - RISK ASSESSMENT - PART 2: PRACTICAL GUIDANCE AND EXAMPLES OF METHODS
I.S. EN 60335-2-51:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS (IEC 60335-2-51:2002 (EQV))
I.S. EN 15287-1:2007 CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
BS EN 15746-2 : 2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 14677:2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
ISO 6966-2:2014 Aircraft ground equipment — Basic requirements — Part 2: Safety requirements
NACE TM21423 : 2017 TEST METHOD FOR DETERMINATION OF SUBSTRATE AND SURFACE TEMPERATURE LIMITS FOR INSULATIVE COATINGS USED FOR PERSONNEL PROTECTION
BS EN 60335-2-39 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS
NF EN ISO 11148-1 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
UNE-EN 60974-1:2013 Arc welding equipment - Part 1: Welding power sources
ONORM EN 1034-1 : NOV 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
S.R. CEN ISO/TR 22411:2011 ERGONOMICS DATA AND GUIDELINES FOR THE APPLICATION OF ISO/IEC GUIDE 71 TO PRODUCTS AND SERVICES TO ADDRESS THE NEEDS OF OLDER PERSONS AND PERSONS WITH DISABILITIES
EN ISO 18217:2015 Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)
IEC GUIDE 117:2010 Electrotechnical equipment - Temperatures of touchable hot surfaces
UNI EN 15166 : 2009 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
ISO 17966:2016 Assistive products for personal hygiene that support users Requirements and test methods
16/30337481 DC : 0 BS EN 13525 - FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
UNI EN ISO 28803 : 2012 ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS
UNI EN 1672-1 : 2014 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
15/30279801 DC : 0 BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN ISO 11148-10 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
BS EN 1459-2 : 2015 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
CSA C22.2 No. 0 : 2010 GENERAL REQUIREMENTS - CANADIAN ELECTRICAL CODE, PART 2
BS EN 474-1 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
PREN 1417 : DRAFT 2013 PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS
I.S. EN ISO 23125:2015 MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015)
DIN EN ISO 20957-9:2014-06 (Draft) STATIONARY TRAINING EQUIPMENT - PART 9: ELLIPTICAL TRAINERS, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-9:2016)
I.S. EN ISO 11148-5:2011 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS (ISO 11148-5:2011)
I.S. EN 60335-2-66:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-66: PARTICULAR REQUIREMENTS FOR WATER-BED HEATERS (IEC 60335-2-66:2002 (EQV))
ISO 20957-9:2016 Stationary training equipment — Part 9: Elliptical trainers, additional specific safety requirements and test methods
DIN EN 619:2011-02 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads (includes Amendment A1:2010)
EN 13000:2010+A1:2014 Cranes - Mobile cranes
BS EN 809:1998+A1:2009 Pumps and pump units for liquids. Common safety requirements
I.S. EN 60335-2-65:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-65: PARTICULAR REQUIREMENTS FOR AIR-CLEANING APPLIANCES (IEC 60335-2-65:2002 (EQV))
I.S. EN 60335-2-27:2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-27: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN EXPOSURE TO ULTRAVIOLET AND INFRARED RADIATION
I.S. EN 15059:2009 SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS
NFPA 1 : 2018 FIRE CODE
I.S. EN 60519-1:2015 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
ISO 20957-10:2017 Stationary training equipment — Part 10: Exercise bicycles with a fixed wheel or without freewheel — Additional specific safety requirements and test methods
I.S. EN 676:2003 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
UNE-EN 12312-2:2015 Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles
EN ISO 9241-410:2008/A1:2012 ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 410: DESIGN CRITERIA FOR PHYSICAL INPUT DEVICES (ISO 9241-410:2008/AMD 1:2012)
DIN EN 13390:2011-02 Food processing machinery - Pie and tart machines - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN 415-6:2013-09 Safety of packaging machines - Part 6: Pallet wrapping machines
DIN EN ISO 11681-2:2012-04 MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011 + AMD 1:2017)
EN 50571:2013/A1:2018 Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines
DIN EN 12012-4:2010-01 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
DIN EN 13289:2015-12 (Draft) Pasta processing plant - Dryers and coolers - Safety and hygiene requirements; German and English version prEN 13289:2015
DIN EN 614-1:2009-06 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
DIN EN 13457:2010-10 Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements; German version EN 13457:2004+A1:2010
DIN EN 14492-2:2016-08 (Draft) CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN EN 1889-1 E : 2011 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
DIN EN 13135-2:2011-07 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
DIN EN 13524:2014-07 Highway maintenance machines - Safety requirements (includes Amendment A2:2014)
DIN EN 289:2014-09 PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
BS EN 13020:2015 Road surface treatment machines. Safety requirements
BS ISO 22734-1:2008 Hydrogen generators using water electrolysis process Industrial and commercial applications
IEC 60335-2-55:2002+AMD1:2008 CSV Household and similar electrical appliances - Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds
IEC 60335-2-83:2001+AMD1:2008 CSV Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage
UNE-EN 285:2016 Sterilization - Steam sterilizers - Large sterilizers
DIN EN 14710-1 E : 2009 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS
BS EN 12012-4 : 2006 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
BS EN 13019 : 2001 MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
BS EN 14957 : 2006 FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
07/30091745 DC : 0 BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS
BS EN 1845:2007 Footwear manufacturing machines. Footwear moulding machines. Safety requirements
ISO 11681-1:2011 Machinery for forestry Portable chain-saw safety requirements and testing Part 1: Chain-saws for forest service
UNE-EN 60335-2-41:2005 Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
BS EN 62135-1:2015 Resistance welding equipment Safety requirements for design, manufacture and installation
IEC 60335-2-10:2002+AMD1:2008 CSV Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines
BS EN 14656 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
ISO 22734-1:2008 Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
BS EN 12828 : 2012 HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
DIN EN 15284 E : 2007 MATERIALS AND ARTICLES IN CONTACT WITH FOOD STUFFS - TEST METHOD FOR THE RESISTANCE TO MICROWAVE HEATING OF CERAMIC, GLASS, GLASS-CERAMIC OR PLASTIC COOKWARE
BS EN 13732:2013 Food processing machinery. Bulk milk coolers on farms. Requirements for performance, safety and hygiene
EN 60335-2-14:2006/A12:2016 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-14: PARTICULAR REQUIREMENTS FOR KITCHEN MACHINES (IEC 60335-2-14:2006, MODIFIED)
BS EN ISO 11681-2 : 2011 MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011)
BS EN 1114-1:2011 Plastics and rubber machines. Extruders and extrusion lines Safety requirements for extruders
IEC 60335-2-66:2002+AMD1:2008+AMD2:2011 CSV Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters
BS EN 1953:2013 Atomising and spraying equipment for coating materials. Safety requirements
BS EN 13861:2011 Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery
BS EN 1012-1:2010 Compressors and vacuum pumps. Safety requirements Air compressors
ISO 11148-3:2012 Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers
IEC 61010-1:2010+AMD1:2016 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
BS EN 12001:2012 Conveying, spraying and placing machines for concrete and mortar. Safety requirements
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
BS EN 1915-1:2013 Aircraft ground support equipment. General requirements Basic safety requirements
BS EN 617 : 2001
ISO 11148-12:2012 Hand-held non-electric power tools — Safety requirements — Part 12: Circular, oscillating and reciprocating saws
BS EN 14681 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
BS EN 13390 : 2002 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 14492-2 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN EN 15284:2007-07 Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware
17/30357380 DC : 0 BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
EN 12853:2001+A1:2010/AC:2010 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
EN 60335-2-81:2003/A2:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-81: PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335-2-81:2002/A2:2011)
EN 1012-3:2013 Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
DIN EN 14492-2:2010-05 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN 50570:2013/A1:2018 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
EN 12387:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements
EN 60335-2-71 : 2003 AMD 1 2007 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS
EN 60335-2-44:2002/A2:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-44: PARTICULAR REQUIREMENTS FOR IRONERS (IEC 60335-2-44:2002/A2:2011)
DIN EN 14989-2:2008-03 Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances
EN 60335-2-80:2003/A2:2009 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS
UNE-ISO 22734-1:2012 Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications
EN 60335-2-70:2002/A1:2007 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-70: PARTICULAR REQUIREMENTS FOR MILKING MACHINES
EN 13019:2001+A1:2008 Machines for road surface cleaning - Safety requirements
EN 60335-2-96:2002/A2:2009 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-96: PARTICULAR REQUIREMENTS FOR FLEXIBLE SHEET HEATING ELEMENTS FOR ROOM HEATING
DIN EN 14710-1:2009-06 Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 1: Classification, general and safety requirements
ONORM EN 12012-4 : 2010 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
EN 15287-1:2007+A1:2010 Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-rooms