ISO 14001:2015
Current
The latest, up-to-date edition.
Environmental management systems — Requirements with guidance for use
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French, Spanish, Castilian
09-14-2015
ISO 14001:2015 specifies the requirements for an environmental management system that an organization can use to enhance its environmental performance. ISO 14001:2015 is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability.
ISO 14001:2015 helps an organization achieve the intended outcomes of its environmental management system, which provide value for the environment, the organization itself and interested parties. Consistent with the organization's environmental policy, the intended outcomes of an environmental management system include:
· enhancement of environmental performance;
· fulfilment of compliance obligations;
· achievement of environmental objectives.
ISO 14001:2015 is applicable to any organization, regardless of size, type and nature, and applies to the environmental aspects of its activities, products and services that the organization determines it can either control or influence considering a life cycle perspective. ISO 14001:2015 does not state specific environmental performance criteria.
ISO 14001:2015 can be used in whole or in part to systematically improve environmental management. Claims of conformity to ISO 14001:2015, however, are not acceptable unless all its requirements are incorporated into an organization's environmental management system and fulfilled without exclusion.
DevelopmentNote |
Supersedes ISO/DIS 14001. (09/2015)
|
DocumentType |
Standard
|
Pages |
35
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
I.S. EN ISO 19011:2011 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS (ISO 19011:2011) |
DIN EN 16125:2016-03 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
XP PREN 9134 : 2005 XP | AEROSPACE SERIES - QUALITY SYSTEMS - SUPPLY CHAIN RISK MANAGEMENT GUIDELINE |
BS ISO 35101:2017 | Petroleum and natural gas industries. Arctic operations. Working environment |
EN ISO 14031:2013 | Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:2013) |
UNE-ISO 37001:2017 | Anti-bribery management systems. Requirements with guidance for use. |
10/30197201 DC : 0 | BS EN ISO 14006 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN |
DIN EN ISO 11135-1:2007-08 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
BS EN 61249-2-39:2013 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
ISO 20700:2017 | Guidelines for management consultancy services |
DEFSTAN 00-972(PT1)/5(2015) : 2015 | MILITARY AIR TRAFFIC SERVICES EQUIPMENT SAFETY AND PERFORMANCE STANDARDS (AERODROME, TERMINAL AND NAVAL AIR TRAFFIC SERVICES) - PART 1: GENERIC AND SOFTWARE |
DEFSTAN 00-56(PT2)/4(2007) : 2007 | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE ON ESTABLISHING A MEANS OF COMPLYING WITH PART 1 |
15/30322573 DC : 0 | BS ISO/IEC 33071 - INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - AN INTEGRATED PROCESS CAPABILITY ASSESSMENT MODEL FOR ENTERPRISE PROCESSES |
BS ISO/IEC 19770-1:2017 | Information technology. IT asset management IT asset management systems. Requirements |
PD ISO/IEC TS 17021-4:2013 | Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of event sustainability management systems |
BS ISO/IEC 15288:2002 | Systems engineering. System life cycle processes |
CSA Z24510 : 2010 : R2014 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE ASSESSMENT AND FOR THE IMPROVEMENT OF THE SERVICE TO USERS |
BS EN ISO 9004:2018 | Quality management. Quality of an organization. Guidance to achieve sustained success |
11/30216823 DC : 0 | BS ISO 17367 - SUPPLY CHAIN APPLICATIONS OF RFID - PRODUCT TAGGING |
BS EN 61249-2-35:2009 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
PD CEN/TR 15983:2010 | Stationary source emissions. Guidance on the application of EN 14181:2004 |
ISO 18601:2013 | Packaging and the environment — General requirements for the use of ISO standards in the field of packaging and the environment |
06/30147232 DC : DRAFT OCT 2006 | IEC 60601-1-10 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD - REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
UNI CEI CEN/TR 16469 : 2014 | HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS |
09/30211071 DC : 0 | BS EN 61249-2-30 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-30: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXCIDE MODIFIED CYANATE ESTER WOVEN GLASS LAMINMATE OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
16/30323827 DC : 0 | BS ISO 50007 - ACTIVITIES RELATING TO ENERGY SERVICES - GUIDELINES FOR THE ASSESSMENT AND IMPROVEMENT OF THE SERVICE TO USERS |
15/30328952 DC : 0 | BS EN ISO 10418 - PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - PROCESS SAFETY SYSTEMS |
ECMA 341 : 4ED 2010 | ENVIRONMENTAL DESIGN CONSIDERATIONS FOR ICT & CE PRODUCTS |
18/30373170 DC : 0 | BS EN 62668-2 - PROCESS MANAGEMENT FOR AVIONICS - COUNTERFEIT PREVENTION - PART 2: MANAGING ELECTRONIC COMPONENTS FROM NON-FRANCHISED SOURCES |
ISO/PAS 28000:2005 | Specification for security management systems for the supply chain |
PD ISO/TS 17665-3:2013 | Sterilization of health care products. Moist heat Guidance on the designation of a medical device to a product family and processing category for steam sterilization |
DD ISO/PAS 28004:2006 | Security management systems for the supply chain. Guidelines for the implementation of ISO/PAS 28000 |
DIN EN ISO 15589-2 E : 2014 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES (ISO 15589-2:2012) |
BS EN 61249-2-26:2005 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
BS ISO 20858:2007 | Ships and marine technology. Maritime port facility security assessments and security plan development |
BS EN 61249-2-23:2005 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad |
CEN/TR 15628:2007 | Maintenance - Qualification of Maintenance personnel |
UNI CEN/TS 16524 : 2013 | MECHANICAL PRODUCTS - METHODOLOGY FOR REDUCTION OF ENVIRONMENTAL IMPACTS IN PRODUCT DESIGN AND DEVELOPMENT |
CSA Z24510 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE ASSESSMENT AND FOR THE IMPROVEMENT OF THE SERVICE TO USERS |
I.S. EN ISO 11137-1:2015 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
DIN ISO 22006:2012-02 | Quality management systems - Guidelines for the application of ISO 9001:2008 to crop production (ISO 22006:2009) |
CSA ISO 14024 : 1999 : R2014 | ENVIRONMENTAL LABELS AND DECLARATION - TYPE 1 ENVIRONMENTAL LABELLING - PRINCIPLES AND PROCEDURES |
BS EN 16751:2016 | Bio-based products. Sustainability criteria |
PD CEN/TR 17004:2016 | Mechanical products. Conditions to set up environmental communication models by recognizing sectorial particularities |
13/30274243 DC : 0 | BS EN 16631 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - RECONDITIONING REQUIREMENTS |
18/30351767 DC : 0 | BS ISO 14005 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR A FLEXIBLE APPROACH TO PHASED IMPLEMENTATION |
UNE-EN ISO 14004:2016 | Environmental management systems - General guidelines on implementation (ISO 14004:2016) |
04/30037050 DC : DRAFT JUNE 2004 | ISO/IEC 17021 - GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY OR ENVIRONMENTAL MANAGEMENT SYSTEMS |
ISO 12576-1:2001 | Thermal insulation — Insulating materials and products for buildings — Conformity control systems — Part 1: Factory-made products |
BS ISO 15686-1:2011 | Buildings and constructed assets. Service life planning General principles and framework |
13/30279579 DC : 0 | BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY |
PD ISO/TS 13811:2015 | Tourism and related services. Guidelines on developing environmental specifications for accommodation establishments |
DEFSTAN 00-56(PT1)/3(2004) : INTERIM | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 1: REQUIREMENTS |
BS ISO/IEC 40180:2017 | Information technology. Quality for learning, education and training. Fundamentals and reference framework Part : General approach |
BS EN 61249-4-19:2013 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). High performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
PD ISO/IEC TS 24748-1:2016 | Systems and software engineering. Life cycle management Guidelines for life cycle management |
PD CEN/TS 16822:2015 | Textiles and textile products. Self-declared environmental claims. Use of the terms |
06/30157092 DC : 0 | ISO/DIS 21789 - GAS TURBINE APPLICATIONS - SAFETY |
12/30253289 DC : 0 | BS ISO 14955-1 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS |
BS EN 61249-2-10:2003 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
UNE-ISO/IEC TS 17021-2:2013 | Conformity assessment -- Requirements for bodies providing audit and certification of management systems. Part 2: Competence requirements for auditing and certification of environmental management systems |
BS EN 61249-2-18:2002 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper clad |
DD ISO/TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
PD CEN/TS 16524:2013 | Mechanical products. Methodology for reduction of environmental impacts in product design and development |
CEI EN 61249-2-39 : 2014 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-39: REINFORCED BASE MATERIALS CLAD AND UNCLAD - HIGH PERFORMANCE EPOXIDE AND NON-EPOXIDE, WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
BS ISO/IEC/IEEE 15288:2015 | Systems and software engineering. System life cycle processes |
14/30287226 DC : 0 | BS EN ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
BS EN ISO 14051:2011 | Environmental management. Material flow cost accounting. General framework |
16/30333286 DC : 0 | BS ISO 14955-1 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS |
API 689 : 2007 | COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT |
CEI EN 61249-2-18 : 2002 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-18: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYESTER NON-WOVEN FIBREGLASS REINFORCED LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
UNE-EN ISO 21809-5:2018 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
BS ISO 14955-1:2017 | Machine tools. Environmental evaluation of machine tools Design methodology for energy-efficient machine tools |
BS ISO 6707-3:2017 | Buildings and civil engineering works. Vocabulary Sustainability terms |
17/30354791 DC : 0 | BS ISO 37153 - SMART COMMUNITY INFRASTRUCTURES - MATURITY MODEL FOR ASSESSMENT AND IMPROVEMENT |
BS EN ISO 14045:2012 | Environmental management. Eco-efficiency assessment of product systems. Principles, requirements and guidelines |
INCITS/ISO/IEC 24700 : 2008 | QUALITY AND PERFORMANCE OF OFFICE EQUIPMENT THAT CONTAINS REUSED COMPONENTS |
BS EN 61249-2-43:2016 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
BS ISO 17422:2002 | Plastics. Environmental aspects. General guidelines for their inclusion in standards |
03/116777 DC : DRAFT NOV 2003 | BS 8800 - OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDE |
BS EN ISO 14050:2010 | Environmental management. Vocabulary |
12/30267658 DC : 0 | BS EN ISO 21809-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION BONDED EPOXY COATINGS |
CSA ISO 14025 : 2007 : R2012 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES |
DIN EN ISO 11135:2014-10 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
10/30216696 DC : 0 | BS EN 45545-6 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS |
PD ISO/IEC TR 15504-6:2008 | Information technology. Process assessment An exemplar system life cycle process assessment model |
CSA ISO/TR 13121 : 2013 | NANOTECHNOLOGIES - NANOMATERIAL RISK EVALUATION |
BS ISO 14034 : 2016 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) |
S.R. CWA 16597:2013 | FISHBIZZ BUSINESS CASE - FOR MONITORING OF QUALITY AND SALES OF FISH PRODUCTS |
BS EN 50581:2012 | Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances |
BS EN 61249-2-4:2002 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad |
17/30354844 DC : 0 | BS ISO 55002 - ASSET MANAGEMENT - MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 55001 |
BS ISO 28000:2007 | Specification for security management systems for the supply chain |
CEI EN 61249-2-2 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-2: REINFORCED BASE MATERIALS, CLAD AND UNCLAD PHENOLIC CELLULOSE PAPER REINFORCED LAMINATE SHEETS, HIGH ELECTRICAL GRADE, COPPER-CLAD |
13/30279690 DC : 0 | BS EN 16250-1 - LEVELS OF PERFORMANCE AND ACCEPTANCE FOR STREET CLEANING AND MUNICIPAL WASTE MANAGEMENT SERVICES - PART 1: GENERAL REQUIREMENTS |
16/30329864 DC : 0 | BS IEC 63000 - TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES |
BS EN 62430:2009 | Environmentally conscious design for electrical and electronic products |
BS OHSAS 18002(2000) : 2000 AMD 14224 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001 |
CEI UNI ISO/IEC TS 17021-4 : 2014 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 4: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF EVENT SUSTAINABILITY MANAGEMENT SYSTEMS |
AAMI ISO 17665-1 : 2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
08/30195548 DC : 0 | DD ISO/TS 16949: 2009 - QUALITY MANAGEMENT SYSTEMS: PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
06/30084693 DC : 0 | BS ISO 15392 - SUSTAINABILITY IN BUILDING CONSTRUCTION - GENERAL PRINCIPLES |
DD ISO/TS 29001 : 2010 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS |
CSA ISO 10014 : 2006 : R2016 | QUALITY MANAGEMENT - GUIDELINES FOR REALIZING FINANCIAL AND ECONOMIC BENEFITS |
S.R. CEN TR 15809:2008 | CHARACTERIZATION OF SLUDGES - HYGIENIC ASPECTS - TREATMENTS |
CSA ISO/IEC 15288 : 2009 : R2014 | SYSTEMS AND SOFTWARE ENGINEERING - SYSTEM LIFE CYCLE PROCESSES |
UNE-CWA 16335:2014 | Biosafety professional competence |
BIS IS/ISO 10012 : 2003(R2009) | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
CSA ISO 14040 : 2006 : R2016 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
CSA Z11135-1 :2009 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
CEI EN 61249-2-5 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES PART 2-5: REINFORCED BASE MATERIALS, CLAD AND UNCLAD BROMINATED EPOXIDE CELLULOSE PAPER REINFORCED CORE / WOVEN E-GLASS REINFORCED SURFACES LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
BS EN 61249-2-2:2005 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad |
CSA Z11135 : 2015 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
CSA N288.5 : 2011 : R2016 | EFFLUENT MONITORING PROGRAMS AT CLASS 1 NUCLEAR FACILITIES AND URANIUM MINES AND MILLS |
BS EN 61249-2-8:2003 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Reinforced base materials clad and unclad. Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
PD ISO/TR 14032:2000 | Environmental management. Examples of environmental performance evaluation (EPE) |
CSA TELECOM ORGANIZATIONS PACKAGE : 2018 | CONSISTS OF CAN/CSA-ISO/IEC 27000:18 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY; CAN/CSA-ISO/IEC 27001:14, INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - REQUIREMENTS; CAN/CSA-ISO/IEC 27002:15 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CODE OF PRACTICE FOR |
BS ISO 15544 : 2000 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - REQUIREMENTS AND GUIDELINES FOR EMERGENCY RESPONSE |
CSA R7003 : 2016 | SUSTAINABILITY STANDARD FOR HOUSEHOLD CLOTHES WASHERS |
CSA ISO 9001 : 2016 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
CSA ISO TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
ISO 14955-1:2017 | Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools |
CSA ISO 14937 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
IEC 61249-2-5:2003 | Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad |
CSA ISO 14040:2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
CEI EN 62040-4 : 2014 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING |
CSA R7001 : 2014 | SUSTAINABILITY STANDARD FOR HOUSEHOLD REFRIGERATION APPLIANCES |
IEC 61249-2-18:2002 | Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials, clad and unclad - Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper-clad |
CSA ISO 10014:2006 | QUALITY MANAGEMENT - GUIDELINES FOR REALIZING FINANCIAL AND ECONOMIC BENEFITS |
CSA Z11135-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
I.S. ISO 26000:2010 | GUIDANCE ON SOCIAL RESPONSIBILITY |
ANSI/AAMI/ISO 14937:2009(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
AAMI ISO TIR 17665-3:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION |
EN IEC 61249-2-47:2018 | Materials for printed boards and other interconnecting structures – Part 2-47: Reinforced base materials clad and unclad – Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2.0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly |
UNE-ISO 19600:2015 | Compliance management systems. Guidelines. |
UNE-ISO 17258:2017 | Statistical methods -- Six Sigma -- Basic criteria underlying benchmarking for Six Sigma in organizations |
STANAG 2545 : 2009 | NATO GLOSSARY ON ENVIRONMENTAL PROTECTION |
CSA ISO TR 14062 : 2003 | ENVIRONMENTAL MANAGEMENT - INTEGRATING ENVIRONMENTAL ASPECTS INTO PRODUCT DESIGN AND DEVELOPMENT |
ISO 45001:2018 | Occupational health and safety management systems — Requirements with guidance for use |
BS EN ISO 21809-1:2011 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyolefin coatings (3-layer PE and 3-layer PP) |
IWA 9:2011 | Framework for managing sustainable development in business districts |
ISO 35101:2017 | Petroleum and natural gas industries — Arctic operations — Working environment |
I.S. EN 15221-4:2011 | FACILITY MANAGEMENT - PART 4: TAXONOMY, CLASSIFICATION AND STRUCTURES IN FACILITY MANAGEMENT |
ISO 28000:2007 | Specification for security management systems for the supply chain |
AAMI/ISO TIR17665-3:2014(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION |
I.S. EN ISO 11135:2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
CSA R7006 : 2018 | SUSTAINABILITY STANDARD FOR HOUSEHOLD ROOM AIR CONDITIONING APPLIANCES |
I.S. EN 16747:2015 | MARITIME AND PORT SECURITY SERVICES |
S.R. CEN TS 15399:2007 | GAS SUPPLY SYSTEMS - GUIDELINES FOR MANAGEMENT SYSTEMS FOR GAS DISTRIBUTION NETWORK |
I.S. EN ISO 21809-5:2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS (ISO 21809-5:2017) |
SAE AS9110C | Quality Management Systems – Requirements for Aviation Maintenance Organizations |
I.S. EN 62430:2009 | ENVIRONMENTALLY CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS |
ANSI/AAMI/ISO 11135:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
I.S. EN 61249-2-22:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-22: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
ISO 10987-2:2017 | Earth-moving machinery — Sustainability — Part 2: Remanufacturing |
I.S. EN ISO 14025:2010 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES |
CEI EN 61249-2-40 : 2014 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-40: REINFORCED BASE MATERIALS CLAD AND UNCLAD - HIGH PERFORMANCE, MODIFIED, NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
I.S. EN 61249-2-2:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-2: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - PHENOLIC CELLULOSE PAPER REINFORCED LAMINATE SHEETS, HIGH ELECTRICAL GRADE, COPPER-CLAD |
ISO 15686-6:2004 | Buildings and constructed assets Service life planning Part 6: Procedures for considering environmental impacts |
ISO/PAS 17005:2008 | Conformity assessment Use of management systems Principles and requirements |
ISO/IEC 17021-2:2016 | Conformity assessment Requirements for bodies providing audit and certification of management systems Part 2: Competence requirements for auditing and certification of environmental management systems |
ISO 16142-2:2017 | Medical devices — Recognized essential principles of safety and performance of medical devices — Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards |
UNI CEI ISO/IEC 17007 : 2010 | CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
CSA ISO TR 14047 : 2004 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE IMPACT ASSESSMENT - EXAMPLES OF APPLICATION OF ISO 14042 |
CEI EN 61249-2-11 : 2005 | MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-11: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES RENFORCEES EN POLYIMIDE ET TISSU DE VERRE DE TYPE E EPOXYDE BROME MODIFIE OU NON MODIFIE, D'INFLAMMABILITE DEFINIE (ESSAI DE COMBUSTION VERTICALE), PLAQUEES CUIVRE |
CSA Z17665-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
ISO/TR 14062:2002 | Environmental management Integrating environmental aspects into product design and development |
UNE-EN 16001:2010 | Energy management systems - Requirements with guidance for use |
PD ISO/TS 9002:2016 | Quality management systems. Guidelines for the application of ISO 9001:2015 |
NSAI/ISO Guide to ISO 9001:2015 | ISO 9001:2015 FOR SMALL ENTERPRISES - WHAT TO DO? - ADVICE FROM ISO/TC 176 |
ISO 37101:2016 | Sustainable development in communities — Management system for sustainable development — Requirements with guidance for use |
UNI EN ISO 19011 : 2012 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
BS EN ISO 14044 : 2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES |
I.S. ISO 14004:2005 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON PRINCIPLES, SYSTEMS AND SUPPORTING TECHNIQUES |
I.S. EN 16751:2016 | BIO-BASED PRODUCTS - SUSTAINABILITY CRITERIA |
I.S. EN 61249-2-44:2016 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-44: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
AAMI ISO 11137-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
PD CLC/TR 50600-99-1:2017 | Information technology. Data centre facilities and infrastructures Recommended practices for energy management |
IEC PAS 62545:2008 | Environmental information on Electrical and Electronic Equipment (EIEEE) |
ASTM E 2725 : 2010 | Standard Guide for Basic Assessment and Management of Greenhouse Gases |
I.S. EN 61249-2-30:2013 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-30: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE MODIFIED CYANATE ESTER WOVEN GLASS LAMINATE OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD (IEC 61249-2-30:2012 (EQV)) |
UNE-ISO 39001:2013 | Road traffic safety (RTS) management systems - Requirements with guidance for use |
UNI EN ISO 14051 : 2011 | ENVIRONMENTAL MANAGEMENT - MATERIAL FLOW COST ACCOUNTING - GENERAL FRAMEWORK |
ISO 21809-1:2011 | Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) |
ISO 14006:2011 | Environmental management systems Guidelines for incorporating ecodesign |
I.S. EN ISO 9001:2015 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015) |
13/30287174 DC : 0 | BS EN ISO 13702 - PETROLEUM AND NATURAL GAS INDUSTRIES - CONTROL AND MITIGATION OF FIRES AND EXPLOSIONS ON OFFSHORE PRODUCTION INSTALLATIONS - REQUIREMENTS AND GUIDELINES |
UNE-EN ISO 15589-2:2014 | Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012) |
BS ISO 24511:2007 | Activities relating to drinking water and wastewater services. Guidelines for the management of wastewater utilities and for the assessment of wastewater services |
UNE-EN 14334:2015 | LPG equipment and accessories - Inspection and testing of LPG road tankers |
IEC 61249-4-18:2013 | Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
IEC 60794-1-1:2015 | Optical fibre cables - Part 1-1: Generic specification - General |
BS EN ISO 14011:1996 | Guidelines for environmental auditing. Audit procedures. Auditing of environmental management systems |
UNE-ISO 55000:2015 | Asset management. Overview, principles and terminology. |
ISO 13702:2015 | Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines |
IEC 61249-2-1:2005 | Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad |
UNE-EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
ISO 17989-1:2015 | Tractors and machinery for agriculture and forestry Sustainability Part 1: Principles |
ISO 11135-1:2007 | Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
BS EN ISO 14031:2013 | Environmental management. Environmental performance evaluation. Guidelines |
ISO 10014:2006 | Quality management Guidelines for realizing financial and economic benefits |
UNE-ISO 22301:2013 | Societal security. Business continuity management systems. Requirements |
I.S. EN 12583:2014 | GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
EN 61249-4-5:2005 | Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability |
EN 60794-1-1:2016 | Optical fibre cables - Part 1-1: Generic specification - General |
EN 61249-2-37:2009 | Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
EN 61249-2-43:2016 | Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
EN 62040-4:2013 | Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting |
CEN/TS 15224:2005 | Health services - Quality management systems - Guide for the use of EN ISO 9001:2000 |
EN 12940:2004 | Footwear manufacturing wastes - Waste classification and management |
DIN EN ISO 14042:2000-07 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - LIFE CYCLE IMPACT ASSESSMENT |
EN 61249-4-19:2013 | Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
CEN/TR 15592:2007 | Health services - Quality management systems - Guide for the use of EN ISO 9004:2000 in health services for performance improvement |
EN 15628:2014 | Maintenance - Qualification of maintenance personnel |
CEN/TS 16765:2015 | LPG equipment and accessories - Environmental considerations for CEN/TC 286 standards |
EN 61249-4-2:2005 | Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability |
EN 61249-2-1:2005 | Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad |
CEN/TR 15983:2010 | Stationary source emissions - Guidance on the application of EN 14181:2004 |
EN 16348:2013 | Gas infrastructure - Safety Management System (SMS) for gas transmission infrastructure and Pipeline Integrity Management System (PIMS) for gas transmission pipelines - Functional requirements |
EN 62542 : 2013 | ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - GLOSSARY OF TERMS (IEC 62542:2013) |
CEN/CLC ISO/IEC/TS 17021-2:2016 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 2: Competence requirements for auditing and certification of environmental management systems (ISO/IEC/TS 17021-2:2012) |
EN 61249-2-27:2013 | Materials for printed boards and other interconnecting structures - Part 2-27: Reinforced base materials clad and unclad - Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad |
CEN Guide 4:2008 | GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS |
CEN/TS 45545-6:2009 | Railway applications - Fire protection on railway vehicles - Part 6: Fire control and management systems |
CEN/TS 15174:2006 | Gas supply systems - Guideline for safety management systems for natural gas transmission pipelines |
EN 61249-2-26:2005 | Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials, clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
CEN ISO/TS 14067:2014 | Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification and communication (ISO/TS 14067:2013) |
EN 12186:2014 | Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements |
EN 61249-2-44:2016 | Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
EN 61249-2-18:2002 | Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials, clad and unclad - Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper-clad |
EN 61193-3:2013 | Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
BS OHSAS 18001:2007 | Occupational health and safety management systems. Requirements |
DEFSTAN 00-970(PT9)/5(2009) : 2009 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 9: UAV SYSTEMS |
DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
NATO AJEPP-3 Ed: A Ver. 2:2023 | ENVIRONMENTAL MANAGEMENT SYSTEM IN NATO MILITARY ACTIVITIES |
DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
ISO/IEC 29142-3:2013 | Information technology — Print cartridge characterization — Part 3: Environment |
ISO 21930:2017 | Sustainability in buildings and civil engineering works — Core rules for environmental product declarations of construction products and services |
GS OEU 019 : 1.1.1 | OPERATIONAL ENERGY EFFICIENCY FOR USERS (OEU); KPIS FOR SMART CITIES |
UNI EN 16309 : 2014-10 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
12/30258747 DC : DRAFT MAR 2012 | BS EN 12583 - GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
CEI EN 61249-2-37 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-37: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
14/30295030 DC : 0 | BS ISO/IEC 17021-1 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 1: REQUIREMENTS |
DIN EN 16309:2014-12 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
08/30184566 DC : DRAFT JUNE 2008 | BS ISO 21931-1 - SUSTAINABILITY IN BUILDING CONSTRUCTION - FRAMEWORK FOR METHODS OF ASSESSMENT FOR ENVIRONMENTAL PERFORMANCE OF CONSTRUCTION WORKS - PART 1: BUILDINGS |
PD ISO/TS 14033:2012 | Environmental management. Quantitative environmental information. Guidelines and examples |
DIN EN 14654-2:2013-03 | Management and control of operational activities in drain and sewer systems outside buildings - Part 2: Rehabilitation |
CLC/TR 50600-99-1:2017 | Information technology - Data centre facilities and infrastructures - Part 99-1: Recommended practices for energy management |
BS EN 61249-4-18:2013 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). High performance epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
BS ISO 17258:2015 | Statistical methods. Six Sigma. Basic criteria underlying benchmarking for Six Sigma in organisations |
CAN/CSA-ISO 14004:16 | Environmental management systems — General guidelines on implementation |
PD ISO/TR 26368:2012 | Environmental damage limitation from fire-fighting water run-off |
BS EN 61249-2-1:2005 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad |
BS ISO 24510:2007 | Activities relating to drinking water and wastewater services. Guidelines for the assessment and for the improvement of the service to users |
02/210157 DC : DRAFT OCT 2002 | IEC 61249-2-23 ED.1 - MATERIALS FOR INTERCONNECTION STRUCTURES - PART 2-23: SECTIONAL SPECIFICATION SET FOR REINFORCED BASE MATERIALS, CLAD AND UNCLAD - SECTION 23: NON-HALOGENATED PHENOLIC CELLULOSE PAPER REINFORCED LAMINATE SHEET, ECONOMIC GRADE, COPPER CLAD |
15/30274589 DC : 0 | BS EN ISO 17776 - PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - MAJOR ACCIDENT HAZARD MANAGEMENT DURING THE DESIGN OF NEW INSTALLATIONS |
I.S. EN ISO 10418:2003 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - ANALYSIS, DESIGN, INSTALLATION AND TESTING OF BASIC SURFACE PROCESS SAFETY SYSTEMS |
BS ISO 28004-1:2007 | Security management systems for the supply chain. Guidelines for the implementation of ISO 28000 |
UNE 179008:2016 | Quality management system for liver transplantation units |
PD ISO/PAS 28007:2012 | Ships and marine technology. Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) |
14/30272945 DC : 0 | BS ISO 18400-103 - SOIL QUALITY - SAMPLING - PART 103: SAFETY |
ISO 50001:2011 | Energy management systems Requirements with guidance for use |
I.S. EN 61249-2-23:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-23: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED PHENOLIC CELLULOSE PAPER REINFORCED LAMINATED SHEETS, ECONOMIC GRADE, COPPER-CLAD |
I.S. EN ISO 17665-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
BS EN 61249-2-6:2003 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
15/30263813 DC : 0 | BS EN ISO 14004 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON PRINCIPLES, SYSTEMS AND SUPPORT TECHNIQUES |
13/30280729 DC : 0 | BS EN 12186 - GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
BS EN 62075:2012 | Audio/video, information and communication technology equipment. Environmentally conscious design |
15/30328933 DC : 0 | BS EN 9100 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS |
UNI EN ISO 14050 : 2010 | ENVIRONMENTAL MANAGEMENT - VOCABULARY |
ISO 15392:2008 | Sustainability in building construction General principles |
DD ISO/PAS 28000:2005 | Specification for security management systems for the supply chain |
BS EN 61249-2-42:2010 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Brominated epoxide non-woven / woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
DIN ISO 13065 E : 2017 | SUSTAINABILITY CRITERIA FOR BIOENERGY (ISO 13065:2015) |
16/30299984 DC : 0 | BS ISO 45001 - OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
BS ISO 10987-2:2017 | Earth-moving machinery. Sustainability Remanufacturing |
BS ISO 55000:2014 | Asset management Overview, principles and terminology |
07/30161531 DC : 0 | BS ISO 28001 - SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - BEST PRACTICES FOR IMPLEMENTING SUPPLY CHAIN SECURITY, ASSESSMENTS AND PLANS - REQUIREMENTS AND GUIDANCE |
13/30282414 DC : 0 | ISO/IEC DTS 17021-4 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 4: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF EVENT SUSTAINABILITY MANAGEMENT |
SAE AS9100D | Quality Management Systems - Requirements for Aviation, Space, and Defense Organizations |
BS EN ISO 14063:2010 | Environmental management. Environmental communication. Guidelines and examples |
15/30323537 DC : 0 | BS EN 16887 - LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
IEC TS 62668-1:2016 | Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components |
BS EN 61249-4-5:2005 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad Polymide, modified or unmodified, woven E-glass prepeg of defined flammability |
I.S. EN 15628:2014 | MAINTENANCE - QUALIFICATION OF MAINTENANCE PERSONNEL |
14/30297267 DC : 0 | BS ISO/IEC/IEEE 15288 - SYSTEMS AND SOFTWARE ENGINEERING - SYSTEM LIFE CYCLE PROCESSES |
PD ISO/TR 14062:2002 | Environmental management. Integrating environmental aspects into product design and development |
ISO 28001:2007 | Security management systems for the supply chain Best practices for implementing supply chain security, assessments and plans Requirements and guidance |
10/30216684 DC : 0 | BS EN 45545-1 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
BS ISO 22301 : 2012 | SOCIETAL SECURITY - BUSINESS CONTINUITY MANAGEMENT SYSTEMS - REQUIREMENTS |
I.S. EN 60601-1-10:2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
16/30314699 DC : 0 | BS ISO 37001 - ANTI-BRIBERY MANAGEMENT SYSTEMS |
10/30236007 DC : 0 | BS EN 16214-1 - SUSTAINABLY PRODUCED BIOMASS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS FOR BIOFUELS AND BIOLIQUIDS - PART 1: TERMINOLOGY |
BS ISO 14026 : 2017 | ENVIRONMENTAL LABELS AND DECLARATIONS - PRINCIPLES, REQUIREMENTS AND GUIDELINES FOR COMMUNICATION OF FOOTPRINT INFORMATION |
NSF AWWA/ANSI 375 - 2016 | SUSTAINABILITY ASSESSMENT FOR WATER CONTACT PRODUCTS |
BS ISO 15378 : 2006 AMD 17315 | PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
02/400020 DC : DRAFT JAN 2002 | BS ISO 14004 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON PRINCIPLES, SYSTEMS AND SUPPORTING TECHNIQUES |
10/30199133 DC : 0 | BS ISO 14051 - ENVIRONMENTAL MANAGEMENT - MATERIAL FLOW COST ACCOUNTING - GENERAL FRAMEWORK |
UNI CEI ISO/IEC TS 17021-2 : 2013 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS |
16/30287972 DC : 0 | BS ISO 14055-1 - ENVIRONMENTAL MANAGEMENT - GUIDELINES FOR ESTABLISHING GOOD PRACTICES FOR COMBATING LAND DEGRADATION AND DESERTIFICATION - PART 1: GOOD PRACTICES FRAMEWORK |
BS ISO 27914:2017 | Carbon dioxide capture, transportation and geological storage. Geological storage |
DD CEN ISO/TS 29001:2011 | Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations |
11/30235901 DC : 0 | BS ISO 21929-2 - SUSTAINABILITY IN BUILDINGS AND CIVIL ENGINEERING WORKS - SUSTAINABILITY INDICATORS - PART 2: FRAMEWORK FOR THE DEVELOPMENT OF INDICATORS FOR CIVIL ENGINEERING WORKS |
I.S. EN 61249-2-43:2016 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-43: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
16/30339654 DC : 0 | BS EN ISO/IEC 17021-2 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS |
PD CEN/CLC ISO/IEC TS 17021-2:2016 | Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of environmental management systems |
11/30214150 DC : 0 | BS ISO 20121 - EVENT SUSTAINABILITY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
BS EN 16348:2013 | Gas infrastructure. Safety Management System (SMS) for gas transmission infrastructure and Pipeline Integrity Management System (PIMS) for gas transmission pipelines. Functional requirements |
16/30335561 DC : DRAFT APR 2016 | BS ISO 37102 - SUSTAINABLE DEVELOPMENT AND RESILIENCE OF COMMUNITIES - VOCABULARY |
12/30249558 DC : 0 | BS EN 14654-1 - MANAGEMENT AND CONTROL OF OPERATIONAL ACTIVITIES IN DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 1: CLEANING |
EN IEC 61249-2-46:2018 | Materials for printed boards and other interconnecting structures – Part 2-46: Reinforced base materials clad and unclad – Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,5 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly |
BS EN 16309 : 2014 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
17/30354834 DC : 0 | BS EN ISO 19011 - GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
17/30301531 DC : 0 | BS ISO 14026 - ENVIRONMENTAL LABELS AND DECLARATIONS - PRINCIPLES, REQUIREMENTS AND GUIDELINES FOR COMMUNICATION OF FOOTPRINT INFORMATION |
14/30263100 DC : 0 | BS EN ISO 17989-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SUSTAINABILITY - PART 1: PRINCIPLES |
I.S. EN 61249-2-1:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-1: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - PHENOLIC CELLULOSE PAPER REINFORCED LAMINATED SHEETS, ECONOMIC GRADE, COPPER CLAD |
I.S. EN 61193-3:2013 | QUALITY ASSESSMENT SYSTEMS - PART 3: SELECTION AND USE OF SAMPLING PLANS FOR PRINTED BOARD AND LAMINATE END-PRODUCT AND IN-PROCESS AUDITING (IEC 61193-3:2013 (EQV)) |
CSA ISO 26000 : 2016 | GUIDANCE ON SOCIAL RESPONSIBILITY |
DD CEN/TS 45545-1:2009 | Railway applications. Fire protection on railway vehicles General |
UNI CEI EN 16001 : 2009 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
BS ISO 19600:2014 | Compliance management systems. Guidelines |
17/30313373 DC : 0 | BS ISO 21809-11 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 11: COATING REPAIRS ON REHABILITATION |
03/301880 DC : DRAFT FEB 2003 | IEC 62139 ED.1 - GUIDANCE FOR ADDITION OF ENVIRONMENTAL ASPECTS IN PRODUCT STANDARDS |
BS EN ISO 21809-5:2017 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems External concrete coatings |
UNI EN ISO 14015 : 2010 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL ASSESSMENT OF SITES AND ORGANIZATIONS (EASO) |
NF EN 61249-2-41 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-41: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
DIN EN 16887:2015-07 (Draft) | LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
DIN EN ISO 22301:2014-12 | SOCIETAL SECURITY - BUSINESS CONTINUITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 22301:2012) |
UNI EN ISO 14045 : 2012 | ENVIRONMENTAL MANAGEMENT - ECO-EFFICIENCY ASSESSMENT OF PRODUCT SYSTEMS - PRINCIPLES, REQUIREMENTS AND GUIDELINES |
BS EN 61249-2-30:2013 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad |
PD CEN/TR 16469:2013 | Hydrometry. Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements |
BS EN 15530:2008 | Aluminium and aluminium alloys. Environmental aspects of aluminium products. General guidelines for their inclusion in standards |
BS EN 61249-2-21:2003 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
BS EN 61249-2-40:2013 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
BS ISO 28007-1:2015 | Ships and marine technology. Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) General |
08/30172145 DC : DRAFT FEB 2008 | BS EN 16001 - ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
11/30231694 DC : 0 | BS EN 62040-4 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING |
04/30048205 DC : DRAFT JUL 2004 | BS EN ISO 17665 - STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
BS EN 61249-2-37:2009 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
I.S. EN ISO 14051:2011 | ENVIRONMENTAL MANAGEMENT - MATERIAL FLOW COST ACCOUNTING - GENERAL FRAMEWORK (ISO 14051:2011) |
ANSI/AAMI/ISO 16142-2:2017 | MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
02/400011 DC : DRAFT JAN 2002 | ISO 14001 - ENVIRONMENTAL MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
CEI EN 61249-2-23 : 2005 | MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-23: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES RENFORCEES DE PAPIER CELLULOSE PHENOLIQUE NON HALOGENE, DE QUALITE ECONOMIQUE, PLAQUEES CUIVRE |
UNE-CEN/TR 15628:2011 IN | Maintenance - Qualification of Maintenance personnel |
BS EN 61249-2-9:2003 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Reinforced base materials clad and unclad. Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
CSA ISO 14044 : 2006 : R2011 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES |
UNE-ISO 20121:2013 | Event sustainability management systems. Requirements with guidance for use. |
PREN 12186 : DRAFT 2013 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
CSA ISO TS 16949 : 2009 : R2015 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
I.S. EN ISO 22301:2014 | SOCIETAL SECURITY - BUSINESS CONTINUITY MANAGEMENT SYSTEMS - REQUIREMENTS |
BS EN 61249-2-5:2003 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad |
UNE-EN ISO 17989-1:2016 | Tractors and machinery for agriculture and forestry - Sustainability - Part 1: Principles (ISO 17989-1:2015) |
BS OHSAS 18001(1999) : 1999 AMD 14223 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - SPECIFICATION |
CEI EN 61249-4-2 : 2006 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES PART 4-2: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
CSA ISO 14025:2007 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES |
ISO 21931-1:2010 | Sustainability in building construction Framework for methods of assessment of the environmental performance of construction works Part 1: Buildings |
I.S. EN 61249-2-8:2003 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-8: REINFORCED BASE MATERIALS CLAD AND UNCLAD - MODIFIED BROMINATED EPOXIDE WOVEN FIBREGLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
CEI EN 61249-2-30 : 2014 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-30: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE MODIFIED CYANATE ESTER WOVEN GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
S.R. CEN/TR 16469:2013 | HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS |
CSA ISO/TS 16949 : 2009(R2015) | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
I.S. EN ISO 14024:2000 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 1 ENVIRONMENTAL LABELLING - PRINCIPLES AND PROCEDURES (ISO 14024:2018) |
UNI CEI EN ISO/IEC 17021 : 2011 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS |
UNI ISO 18091 : 2014 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 9001:2008 IN LOCAL GOVERNMENT |
UNI CEN ISO/TS 17665-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
CSA ISO 50004 : 2015 | ENERGY MANAGEMENT SYSTEMS - GUIDANCE FOR THE IMPLEMENTATION, MAINTENANCE AND IMPROVEMENT OF AN ENERGY MANAGEMENT SYSTEM |
S.R. CEN/TS 16822:2015 | TEXTILES AND TEXTILE PRODUCTS - SELF-DECLARED ENVIRONMENTAL CLAIMS - USE OF THE TERMS |
UNE-EN ISO 15378:2016 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO 15378:2015) |
CSA ISO 14015 : 2002 : R2016 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL ASSESSMENT OF SITES AND ORGANIZATIONS (EASO) |
IEC GUIDE 109:2012 | Environmental aspects - Inclusion in electrotechnical product standards |
IEC 61249-2-40:2012 | Materials for printed boards and other interconnecting structures - Part 2-40: Reinforced base materials, clad and unclad - High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
CSA Z17665-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
CEI EN 61249-2-9 : 2004 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-9: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BISMALEIMIDE/TRIAZINE, MODIFIED EPOXIDE OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
I.S. EN 16125:2015 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE |
S.R. CEN/TS 16524:2013 | MECHANICAL PRODUCTS - METHODOLOGY FOR REDUCTION OF ENVIRONMENTAL IMPACTS IN PRODUCT DESIGN AND DEVELOPMENT |
CEI EN 61249-2-22 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-22: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
DD CEN/TS 45545-6:2009 | Railway applications. Fire protection on railway vehicles Fire control and management systems |
ISO/TS 19930:2017 | Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6 |
CSA N286.0.1 : 2014 | COMMENTARY ON N286-12, MANAGEMENT SYSTEM REQUIREMENTS FOR NUCLEAR FACILITIES |
IEC TR 62422:2007 | Environmental characterization of solid insulating materials |
IEC 61249-2-11:2003 | Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
UNE-EN 50598-3:2015 | Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations |
CSA Z24511 : 2010 : R2014 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF WASTEWATER UTILITIES AND FOR THE ASSESSMENT OF WASTEWATER SERVICES |
I.S. EN 61249-2-36:2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-36: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
16/30338132 DC : 0 | BS EN 15399 - GAS INFRASTRUCTURE - SAFETY MANAGEMENT SYSTEMS FOR GAS NETWORKS WITH MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR |
EN 60601-1-10:2008/A1:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS (IEC 60601-1-10:2007) |
S.R. CWA 16275:2011 | GUIDELINES FOR THE SELECTION OF CONSULTANTS ADVISING SMES ON INTEGRATED QUALITY, ENVIRONMENT, HEALTH AND SAFETY MANAGEMENT SYSTEMS |
CSA ISO 50001 : 2011 : R2016 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
NF EN 61249-2-42 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-42: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
CEI EN 61249-2-35 : 2010 | MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-35: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES EN TISSU DE VERRE DE TYPE E EPOXYDE MODIFIE, PLAQUEES CUIVRE, D'INFLAMMABILITE DEFINIE (ESSAI DE COMBUSTION VERTICALE) POUR LES ASSEMBLAGES SANS PLOMB |
I.S. EN 16887:2017 | LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
I.S. EN 14654-2:2013 | MANAGEMENT AND CONTROL OF OPERATIONAL ACTIVITIES IN DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 2: REHABILITATION |
ISO/TS 14033:2012 | Environmental management Quantitative environmental information Guidelines and examples |
ISO/TS 13811:2015 | Tourism and related services — Guidelines on developing environmental specifications for accommodation establishments |
CEI EN 61249-2-41 : 2011 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-41: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
S.R. CEN/TS 45545-6:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS |
I.S. EN 61249-2-39:2013 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-39: REINFORCED BASE MATERIALS CLAD AND UNCLAD - HIGH PERFORMANCE EPOXIDE AND NON-EPOXIDE, WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY (IEC 61249-2-39:2012 (EQV)) |
I.S. EN 15530:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - ENVIRONMENTAL ASPECTS OF ALUMINIUM PRODUCTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS |
S.R. CWA 17008:2016 | CULTURAL GUIDELINES FOR HUMANITARIAN DEMINING |
ISO 18400-103:2017 | Soil quality — Sampling — Part 103: Safety |
EN ISO 50001:2011 | Energy management systems - Requirements with guidance for use (ISO 50001:2011) |
IWA 19:2017 | Guidance principles for the sustainable management of secondary metals |
ISO/IEC 17007:2009 | Conformity assessment — Guidance for drafting normative documents suitable for use for conformity assessment |
ISO/TR 26368:2012 | Environmental damage limitation from fire-fighting water run-off |
I.S. EN IEC 61249-2-45:2018 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-45: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NONHALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF THERMAL CONDUCTIVITY (1.0W/M K) AND DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
IWA 1:2005 | Quality management systems Guidelines for process improvements in health service organizations |
S.R. CEN/TS 16765:2015 | LPG EQUIPMENT AND ACCESSORIES - ENVIRONMENTAL CONSIDERATIONS FOR CEN/TC 286 STANDARDS |
UNI CEN ISO/TS 14067 : 2014 | GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION |
ISO 21809-5:2017 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings |
ISO 10418:2003 | Petroleum and natural gas industries Offshore production installations Analysis, design, installation and testing of basic surface process safety systems |
ISO 20140-5:2017 | Automation systems and integration — Evaluating energy efficiency and other factors of manufacturing systems that influence the environment — Part 5: Environmental performance evaluation data |
ECMA 370 : 5ED 2015 | TED - THE ECO DECLARATION |
ISO/IEC TS 24748-1:2016 | Systems and software engineering Life cycle management Part 1: Guidelines for life cycle management |
I.S. EN 61249-2-9:2003 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BISMALEIMIDE/TRIAZINE MODIFIED EPOXIDE OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
UNI EN ISO 14006 : 2011 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN |
I.S. EN 61249-2-35:2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-35: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
I.S. EN 16309:2014 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
I.S. EN 61249-2-38:2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-38: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
ISO 37100:2016 | Sustainable cities and communities — Vocabulary |
I.S. EN 61249-4-1:2008 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-1: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
UNE-ISO 30301:2011 | Information and documentation. Management system for records. Requirements. |
ISO 14044:2006 | Environmental management Life cycle assessment Requirements and guidelines |
CSA C22.2 No. 60601-1-10 : 2009 : R2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
I.S. EN ISO 12736:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
BS EN ISO 22301:2014 | Societal security. Business continuity management systems. Requirements |
UNI ISO TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
NF EN 61249-2-37 : 2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-37: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
S.R. CEN/TS 45545-2:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
ISO 26367-1:2011 | Guidelines for assessing the adverse environmental impact of fire effluents Part 1: General |
IEC 61249-2-31:2009 | Materials for printed boards and other interconnecting structures - Part 2-31: Reinforced base materials, clad and unclad - Halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 4,1 at 1 GHz) and flammability (vertical burning test), copper-clad |
IECQ 001002-5:2008 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SCHEME) RULES OF PROCEDURE - PART 5: HAZARDOUS SUBSTANCE PROCESS MANAGEMENT REQUIREMENTS (IECQ HSPM) |
IEC 61249-2-21:2003 | Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
IEC TR 62837:2013 | Energy efficiency through automation systems |
NSF 426 : 2017 | ENVIRONMENTAL LEADERSHIP AND CORPORATE SOCIAL RESPONSIBILITY ASSESSMENT OF SERVERS |
EN 62430:2009 | Environmentally conscious design for electrical and electronic products |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 16813:2006 | Building environment design — Indoor environment — General principles |
EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
ISO/IEC 15288:2008 | Systems and software engineering — System life cycle processes |
EN ISO 14937:2009 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
DIN EN ISO 17665-1:2006-11 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
DIN EN 14334:2015-01 | LPG equipment and accessories - Inspection and testing of LPG road tankers |
IEC 61249-2-9:2003 | Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials, clad and unclad - Bismaleimide/triazine modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
BS EN ISO 14644-4:2001 | Cleanrooms and associated controlled environments Design, construction and start-up |
UNE-EN 12186:2015 | Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
ISO/TS 29001:2010 | Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
IEC 61249-4-5:2005 | Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability |
IEC 61249-2-26:2005 | Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
ISO/IEC TS 17021-2:2012 | Conformity assessment Requirements for bodies providing audit and certification of management systems Part 2: Competence requirements for auditing and certification of environmental management systems |
BS EN 14969:2006 | Railway applications. Track. Qualification system for railway trackwork contractors |
BS EN 14717:2005 | Welding and allied processes. Environmental check list |
BS EN ISO 14042:2000 | Environmental management. Life cycle management. Life cycle impact assessment |
I.S. EN ISO 14224:2016 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016) |
I.S. EN ISO 17776:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - MAJOR ACCIDENT HAZARD MANAGEMENT DURING THE DESIGN OF NEW INSTALLATIONS (ISO 17776:2016) |
I.S. EN ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
EN 14654-1:2014 | Management and control of operational activities in drain and sewer systems outside buildings - Part 1: Cleaning |
DIN EN 12583:2000-11 | GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
I.S. EN ISO 14031:2013 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES (ISO 14031:2013) |
I.S. EN 14654-1:2014 | MANAGEMENT AND CONTROL OF OPERATIONAL ACTIVITIES IN DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 1: CLEANING |
I.S. EN 12186:2014 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
EN 14654-2:2013 | Management and control of operational activities in drain and sewer systems outside buildings - Part 2: Rehabilitation |
I.S. EN ISO 21809-2:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION-BONDED EPOXY COATINGS (ISO 21809-2:2014) |
I.S. EN ISO 13702:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - CONTROL AND MITIGATION OF FIRES AND EXPLOSIONS ON OFFSHORE PRODUCTION INSTALLATIONS - REQUIREMENTS AND GUIDELINES (ISO 13702:2015) |
I.S. EN 14334:2014 | LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS |
UNI EN ISO 15589-2 : 2014 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES |
VDI 4075 Blatt 8:2017-06 | Cleaner production (PIUS) - Breweries |
VDI 4085:2017-04 | Planning, construction and managing of scrapyards - Facilities and equipment for the handling, storage and treatment of scraps and other materials |
VDI 2260:2003-10 | Technical warranty for gas cleaning equipment - Particulate and gaseous matter |
VDI 4413:2016-03 | Logistic of waste disposal in producing enterprises |
VDI 7000:2015-01 | Early public participation in industrial and infrastructure projects |
VDI 4070 Blatt 1:2016-02 | Sustainable management in small and medium-sized enterprises - Guidance notes for sustainable management |
VDI 4060 Blatt 2:2005-06 | Integrated Management Systems - Guidance for practical implementation - Case studies |
DIN EN ISO 17776:2003-09 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - GUIDELINES ON TOOLS AND TECHNIQUES FOR HAZARD IDENTIFICATION AND RISK ASSESSMENT |
VDI 3892:2015-03 | Emission control - Roasted-coffee-producing industry - Plants with a minimum daily output of at least 0,5 tonnes |
VDI 4060 Blatt 1:2005-06 | Integrated Management Systems - Guidance for practical implementation - General information |
VDI 4087:2016-12 | Planning, construction and managing of scrap wood yards |
VDI 2262 Blatt 1:2013-06 | Workplace air - Reduction of exposure to air pollutants - Legal principles, terms and definitions, basic organisational measures for industrial safety and environmental protection |
BS ISO 39001:2012 | Road traffic safety (RTS) management systems. Requirements with guidance for use |
DIN EN ISO 14004:2016-08 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON IMPLEMENTATION (ISO 14004:2016) |
CSA ISO 14031 : 2014 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES |
DIN EN 16348:2013-09 | Gas infrastructure - Safety Management System (SMS) for gas transmission infrastructure and Pipeline Integrity Management System (PIMS) for gas transmission pipelines - Functional requirements |
BS ISO 30003:2009 | Ships and marine technology. Ship recycling management systems. Requirements for bodies providing audit and certification of ship recycling management |
09/30179135 DC : 0 | BS EN 61249-2-42 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-42: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BROAMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
CSA ISO 14024 : 1999 : R2004 | ENVIRONMENTAL LABELS AND DECLARATION - TYPE 1 ENVIRONMENTAL LABELLING - PRINCIPLES AND PROCEDURES |
EN IEC 61249-2-45:2018 | Materials for printed boards and other interconnecting structures – Part 2-45: Reinforced base materials clad and unclad – Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly |
BS ISO 35103:2017 | Petroleum and natural gas industries. Arctic operations. Environmental monitoring |
DIN EN 16751:2016-06 | BIO-BASED PRODUCTS - SUSTAINABILITY CRITERIA |
15/30329378 DC : 0 | BS EN 9110 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION MAINTENANCE ORGANIZATIONS |
ISO 15686-5:2017 | Buildings and constructed assets — Service life planning — Part 5: Life-cycle costing |
PREN 45545-6 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS |
DIN ISO 20121:2013-04 | Event sustainability management systems - Requirements with guidance for use (ISO 20121:2012) |
04/30048118 DC : DRAFT MAY 2004 | BS EN ISO 11135 - STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
I.S. EN ISO/IEC 17021-1:2015 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 1: REQUIREMENTS (ISO/IEC 17021-1:2015) |
15/30324519 DC : 0 | BS EN ISO 14224 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT |
17/30351251 DC : 0 | BS EN 62959 - ENVIRONMENTAL CONSCIOUS DESIGN (ECD) - PRINCIPLES, REQUIREMENTS AND GUIDANCE |
08/30135847 DC : DRAFT AUG 2008 | BS ISO 9004 - MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
06/30155957 DC : DRAFT SEP 2006 | BS ISO 28004 - SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - GUIDELINES FOR THE IMPLEMENTATION OF ISO/PAS 28000 |
BS PAS 7000(2014) : 2014 | SUPPLY CHAIN RISK MANAGEMENT - SUPPLIER PREQUALIFICATION |
PD ISO/TR 14047:2012 | Environmental management. Life cycle assessment. Illustrative examples on how to apply ISO 14044 to impact assessment situations |
04/30115497 DC : 0 | EN 45545-6 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS |
BS ISO 50004:2014 | Energy management systems. Guidance for the implementation, maintenance and improvement of an energy management system |
BS ISO/IEC 15504-6:2013 | Information technology. Process assessment An exemplar system life cycle process assessment model |
BS ISO 18788:2015 | Management system for private security operations. Requirements with guidance for use |
BS EN 61249-2-38:2009 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
BS ISO 15686-5:2017 | Buildings and constructed assets. Service life planning Life-cycle costing |
BS EN 61249-2-19:2002 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad |
10/30216687 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
ISO/PAS 28004:2006 | Security management systems for the supply chain Guidelines for the implementation of ISO/PAS 28000 |
BS EN ISO 15544:2010 | Petroleum and natural gas industries. Offshore production installations. Requirements and guidelines for emergency response |
04/30066208 DC : DRAFT DEC 2004 | ISO 14224 - PETROLEUM AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT |
OHSAS 18001:2007 | Occupational health and safety management systems. Requirements |
BS ISO 20400:2017 | Sustainable procurement. Guidance |
IEC 61249-2-32:2009 | Materials for printed boards and other interconnecting structures - Part 2-32: Reinforced base materials, clad and unclad - Halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 3,7 at 1 GHz) and flammability (vertical burning test), copper-clad |
16/30272856 DC : 0 | BS ISO/IEC 40180 - INFORMATION TECHNOLOGY - LEARNING, EDUCATION, AND TRAINING - QUALITY FOR LEARNING, EDUCATION AND TRAINING - FUNDAMENTALS AND REFERENCE FRAMEWORK |
16/30292328 DC : 0 | BS ISO 27914 - CARBON DIOXIDE CAPTURE, TRANSPORTATION AND GEOLOGICAL STORAGE - GEOLOGICAL STORAGE |
IEC GUIDE 114:2005 | Environmentally conscious design - Integrating environmental aspects into design and development of electrotechnical products |
BS ISO 30302:2015 | Information and documentation. Management systems for records. Guidelines for implementation |
BS EN 16001:2009 | Energy management systems. Requirements with guidance for use |
17/30333280 DC : 0 | BS ISO 17422 - PLASTICS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS |
BIP 0139 : 2013 | AN INTRODUCTION TO ISO/IEC 27001:2013 |
14/30298663 DC : 0 | BS ISO 30302 - INFORMATION AND DOCUMENTATION - MANAGEMENT SYSTEMS FOR RECORDS - GUIDELINES FOR IMPLEMENTATION |
S.R. OHSAS 18002:2008 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001:2007 |
ANSI/ASSE Z490.1 : 2016 | CRITERIA FOR ACCEPTED PRACTICES IN SAFETY, HEALTH AND ENVIRONMENTAL TRAINING |
BS ISO 15686-6:2004 | Buildings and constructed assets. Service life planning Procedures for considering environmental impacts |
PD ISO/TR 24699:2009 | Rubber and rubber products. Environmental aspects. General guidelines for their inclusion in standards |
PD CEN/TR 15809:2008 | Characterization of sludges. Hygienic aspects. Treatments |
BS EN ISO 14006:2011 | Environmental management systems. Guidelines for incorporating ecodesign |
11/30249097 DC : 0 | BS EN 60947-1:2007+A2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
BS ISO 15589-2 : 2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES |
UNE-ISO/TS 22003:2015 | Food safety management systems -- Requirements for bodies providing audit and certification of food safety management systems |
I.S. EN ISO 10012:2003 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
DIN EN 16631:2015-07 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - RECONDITIONING REQUIREMENTS |
07/30161754 DC : 0 | BS ISO 15270 - PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE |
BS ISO 17367:2013 | Supply chain applications of RFID. Product tagging |
UNE-EN 16214-1:2013 | Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology |
ISO/IEC/IEEE 12207:2017 | Systems and software engineering — Software life cycle processes |
BS ISO 37100:2016 | Sustainable cities and communities. Vocabulary |
BS EN 61249-4-1:2008 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Epoxide woven E-glass prepreg of defined flammability |
11/30246444 DC : 0 | BS EN 62075 ED 2.0 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN |
UNI EN 15221-4 : 2011 | FACILITY MANAGEMENT - PART 4: TAXONOMY, CLASSIFICATION AND STRUCTURES IN FACILITY MANAGEMENT |
07/30164961 DC : 0 | BS EN 61249-4-15 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-15: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
UNE-ISO/TS 9002:2017 | Quality management systems -- Guidelines for the application of ISO 9001:2015 |
14/30263822 DC : 0 | BS ISO 15686-5 - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE-LIFE PLANNING - PART 5: LIFE-CYCLE COSTING |
07/30135834 DC : 0 | ISO 9001 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
PD ISO/TR 13121:2011 | Nanotechnologies. Nanomaterial risk evaluation |
UNE-EN 16348:2014 | Gas infrastructure - Safety Management System (SMS) for gas transmission infrastructure and Pipeline Integrity Management System (PIMS) for gas transmission pipelines - Functional requirements |
BIP 0140 : 2014 | UNDERSTANDING THE NEW ISO MANAGEMENT SYSTEM REQUIREMENTS |
08/30192173 DC : 0 | BS EN 62542 ED1 - ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - STANDARDIZATION OF ENVIRONMENTAL ASPECTS - GLOSSARY OF TERMS |
BS EN ISO/IEC 17021:2011 | Conformity assessment. Requirements for bodies providing audit and certification of management systems |
BS EN 14654-2:2013 | Management and control of operational activities in drain and sewer systems outside buildings Rehabilitation |
08/30139611 DC : DRAFT JUNE 2008 | BS ISO/IEC 17007 - CONFORMITY ASSESSMENT - GUIDELINES FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
BS EN 16887:2017 | Leather. Environmental footprint. Product Category Rules (PCR). Carbon footprints |
UNI EN ISO 23936-1 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
UNI EN 14654-1 : 2014 | MANAGEMENT AND CONTROL OF OPERATIONAL ACTIVITIES IN DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 1: CLEANING |
DIN ISO 13065:2017-06 | SUSTAINABILITY CRITERIA FOR BIOENERGY (ISO 13065:2015) |
08/30177095 DC : DRAFT AUG 2008 | BS ISO 30003 - SHIPS AND MARINE TECHNOLOGY - SHIP RECYCLING MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF SHIP RECYCLING MANAGEMENT |
12/30244912 DC : 0 | BS ISO 14067 - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION |
14/30276392 DC : 0 | BS ISO 28007-1 - SHIPS AND MARINE TECHNOLOGY - GUIDELINES FOR PRIVATE MARITIME SECURITY COMPANIES (PMSC) PROVIDING PRIVATELY CONTRACTED ARMED SECURITY PERSONNEL (PCASP) ON BOARD SHIPS (AND PRO FORMA CONTRACT) |
ASTM E 3032 : 2015 : EDT 1 | Standard Guide for Climate Resiliency Planning and Strategy |
BS ISO/IEC 33071:2016 | Information technology. Process assessment. An integrated process capability assessment model for Enterprise processes |
14/30310028 DC : 0 | BS EN 60794-1-1 - OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL |
10/30235541 DC : 0 | BS EN 61249-4-19 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-19: SECTIONAL SPECIFICATION SET FOR PREPEG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HIGH PERFORMANCE NON-HALOGENATED EPOXIDE WOVEN OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
12/30273046 DC : 0 | BS EN 15628 - MAINTENANCE - QUALIFICATION OF MAINTENANCE PERSONNEL |
07/30164965 DC : 0 | BS EN 61249-4-16 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-16: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - MULTIFUNCTIONAL NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
13/30248599 DC : 0 | BS ISO 17258 - STATISTICAL METHODS - SIX SIGMA - BENCHMARKING FOR SIX SIGMA |
UNE-EN ISO 14006:2011 | Environmental management systems - Guidelines for incorporating ecodesign (ISO 14006:2011) |
14/30231508 DC : 0 | BS ISO 13065 - SUSTAINABILITY CRITERIA FOR BIOENERGY |
PD CEN/TR 15592:2007 | Health services. Quality management systems. Guide for the use of EN ISO 9004:2000 in health services for performance improvement |
13/30284118 DC : 0 | BS EN 61249-2-44 ED.1 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-44: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
BS ISO 20140-5:2017 | Automation systems and integration. Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Environmental performance evaluation data |
04/30098132 DC : DRAFT JUL 2004 | EN 14969 - RAILWAY APPLICATIONS - TRACK - QUALIFICATION OF RAILWAY TRACKWORKS CONTRACTORS |
BS PD ISO/TS 14067 : 2013 | GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION |
BS EN ISO 14025:2010 | Environmental labels and declarations. Type III environmental declarations. Principles and procedures |
I.S. EN 61249-2-37:2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-37: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
S.R. CLC/TR 62125:2008 | ENVIRONMENTAL STATEMENT SPECIFIC TO TC 20 - ELECTRIC CABLES |
04/30126470 DC : DRAFT DEC 2004 | ISO/IEC 24743 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS REQUIREMENTS SPECIFICATION |
PD CEN/TS 16765:2015 | LPG equipment and accessories. Environmental considerations for CEN/TC 286 standards |
17/30358995 DC : 0 | BS ISO 45001 - OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
UNE-ISO 20858:2012 | Ships and marine technology. Maritime port facility security assessments and security plan development |
UNE-ISO 28004:2014 | Security management systems for the supply chain. Guidelines for the implementation of ISO 28000 |
BS EN 60601-1-9 : 2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-9: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR ENVIRONMENTALLY CONSCIOUS DESIGN |
BS ISO/IEC 29142-3:2013 | Information technology. Print cartridge characterization Environment |
PD CEN ISO/TS 14067:2014 | Greenhouse gases. Carbon footprint of products. Requirements and guidelines for quantification and communication |
PD IEC/TR 62476:2010 | Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products |
BS EN ISO 14015:2010 | Environmental management. Environmental assessment of sites and organizations (EASO) |
CSA ISO 14040 : 2006 : R2011 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
PD ISO/TR 15686-11:2014 | Buildings and constructed assets. Service life planning Terminology |
CSA ISO 14011 : 0 | GUIDELINES FOR ENVIRONMENTAL AUDITING - AUDIT PROCEDURES - AUDITING OF ENVIRONMENTAL MANAGEMENT SYSTEMS |
EN ISO 11135:2014 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
BS EN 61193-3:2013 | Quality assessment systems Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
BS ISO 21930:2007 | Sustainability in building construction. Environmental declaration of building products |
CSA ISO 14042 : 0 | ENVIRONMENTAL MANAGEMENT-LIFE CYCLE ASSESSMENT-LIFE CYCLE IMPACT ASSESSMENT |
UNI ISO/TS 14067 : 2013 | GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION |
BS ISO 21789:2009 | Gas turbine applications — Safety |
BS EN 60601-1-10 : 2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
02/211158 DC : DRAFT DEC 2002 | IEC 61249-4-5 ED.1 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-5: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - POLYIMIDE, MODIFIED OR UNMODIFIED, WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) |
IEC 62430:2009 | Environmentally conscious design for electrical and electronic products |
IEEE DRAFT 15288 : 0 | SOFTWARE AND SYSTEMS ENGINEERING - SYSTEM LIFE CYCLE PROCESSES |
UNE-ISO 20400:2017 | Sustainable procurement. Guidance |
SAE ARP6178 | Fraudulent/Counterfeit Electronic Parts; Tool for Risk Assessment of Distributors |
CSA Z11135-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
UNE-ISO/IEC 17007:2010 | Conformity assessment. Guidance for drafting normative documents suitable for use for conformity assessment |
CSA ISO 10014 : 2006 : INC : COR 1 : 2016 : R201100 | QUALITY MANAGEMENT - GUIDELINES FOR REALIZING FINANCIAL AND ECONOMIC BENEFITS |
DIN EN 16001 E : 2009 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
CSA ISO 14937 : 2011 : R2016 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
NF EN 61249-2-36 : 2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-36: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
CSA ISO TR 14032 : 0 | ENVIRONMENTAL MANAGEMENT - EXAMPLES OF ENVIRONMENTAL PERFORMANCE EVALUATION (EPE) |
CSA ISO 14044 : 2006 : R2016 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES |
IEC 61249-2-34:2009 | Materials for printed boards and other interconnecting structures - Part 2-34: Reinforced base materials, clad and unclad - Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 3,7 at 1 GHz) and flammability (vertical burning test), copper-clad |
UNI ISO 30301 : 2013 | INFORMATION AND DOCUMENTATION - MANAGEMENT SYSTEMS FOR RECORDS - REQUIREMENTS |
ISO 27914:2017 | Carbon dioxide capture, transportation and geological storage Geological storage |
CSA Z17665-1:09 (R2019) | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (Adopted ISO 17665-1:2006, first edition, 2006-08-15, with Canadian deviations) |
IEC/IEEE 60076-57-129:2017 | Power transformers - Part 57-129: Transformers for HVDC applications |
UNE-ISO 30302:2015 | Information and documentation. Management systems for records. Guidelines for implementation |
I.S. EN 16348:2013 | GAS INFRASTRUCTURE - SAFETY MANAGEMENT SYSTEM (SMS) FOR GAS TRANSMISSION INFRASTRUCTURE AND PIPELINE INTEGRITY MANAGEMENT SYSTEM (PIMS) FOR GAS TRANSMISSION PIPELINES - FUNCTIONAL REQUIREMENTS |
CEI UNI ISO/IEC 17007 : 2012 | CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
I.S. EN 61249-2-41:2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-41: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
DIN EN 16214-1:2012-11 | SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 1: TERMINOLOGY |
IEC 61249-2-6:2003 | Materials for printed boards and other interconnecting structures - Part 2-6: Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
ISO 15270:2008 | Plastics — Guidelines for the recovery and recycling of plastics waste |
ISO 35103:2017 | Petroleum and natural gas industries — Arctic operations — Environmental monitoring |
IEC TS 62844:2016 | Guidelines for quality and risk assessment for nano-enabled electrotechnical products |
CEI UNI EN ISO 50001 : 2012 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
CSA Z24511 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF WASTEWATER UTILITIES AND FOR THE ASSESSMENT OF WASTEWATER SERVICES |
CSA Z17665-2:09 (R2019) | Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009, IDT) |
ISO 15378:2017 | Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
AWWA G400 : 2009 | UTILITY MANAGEMENT SYSTEM |
S.R. CWA 16335:2011 | BIOSAFETY PROFESSIONAL COMPETENCE |
R7005-17 | Sustainability standard for household clothes drying appliances (Binational standard with AHAM 7005-2017 and UL 7005) |
UNI ISO 20121 : 2013 | EVENT SUSTAINABILITY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
AAMI ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
ANSI/AAMI ISO 17665-1:2006(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
S.R. CEN/CLC ISO/IEC/TS 17021-2:2016 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS (ISO/IEC/TS 17021-2:2012) |
I.S. EN ISO 17989-1:2015 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SUSTAINABILITY - PART 1: PRINCIPLES (ISO 17989-1:2015) |
EN ISO 19011:2011 COR 2011 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS (ISO 19011:2011) |
I.S. EN 60794-1-1:2016 | OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL |
I.S. EN 16631:2015 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - RECONDITIONING REQUIREMENTS |
ISO 6707-3:2017 | Buildings and civil engineering works — Vocabulary — Part 3: Sustainability terms |
I.S. EN ISO 50001:2011 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE (ISO 50001:2011) |
ISO 14055-1:2017 | Environmental management — Guidelines for establishing good practices for combatting land degradation and desertification — Part 1: Good practices framework |
S.R. CWA 15793:2011 | LABORATORY BIORISK MANAGEMENT |
EN ISO 15378:2017 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017) |
AAMI ISO 11135-1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
S.R. CWA 15992:2009 | HARMONIZATION OF DATA INTERCHANGE IN TOURISM |
ISO 18091:2014 | Quality management systems Guidelines for the application of ISO 9001:2008 in local government |
ISO/IEC 33071:2016 | Information technology — Process assessment — An integrated process capability assessment model for Enterprise processes |
I.S. EN ISO/IEC 17011:2017 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR ACCREDITATION BODIES ACCREDITING CONFORMITY ASSESSMENT BODIES (ISO/IEC 17011:2017) |
ISO 17367:2013 | Supply chain applications of RFID — Product tagging |
ISO/PAS 30003:2008 | Ships and marine technology Ship recycling management systems Requirements for bodies providing audit and certification of ship recycling management |
UNI EN ISO 21809-1 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP) |
CSA ISO 19011 : 2012 : R2017 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
CSA ISO 50001 : 2011 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
PREN 45545-1 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
BS EN 16125:2015 | LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase |
EN ISO 21809-5:2017 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
ISO/TR 24699:2009 | Rubber and rubber products Environmental aspects General guidelines for their inclusion in standards |
UNE-ISO/IEC TS 17021-4:2015 | Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 4: Competence requirements for auditing and certification of event sustainability management systems |
NACE SP 01 15 : 2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES |
PREN 14654-1 : DRAFT 2012 | MANAGEMENT AND CONTROL OF OPERATIONAL ACTIVITIES IN DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 1: CLEANING |
CEI EN 50581 : 2013 | TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES |
CEI EN 61249-2-27 : 2014 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-27: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BISMALEIMIDE/TRIAZINE MODIFIED WITH NON-HALOGENATED EPOXIDE WOVEN GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
CSA SPE 7006 : 2017 | SUSTAINABILITY STANDARD FOR HOUSEHOLD ROOM AIR CONDITIONING APPLIANCES |
CSA ISO GUIDE 64 : 1998 | GUIDE FOR THE INCLUSION OF ENVIRONMENTAL ASPECTS IN PRODUCT STANDARDS |
CSA C22.2 No. 60601-1-10:2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
ISO/TR 15686-11:2014 | Buildings and constructed assets — Service life planning — Part 11: Terminology |
ISO/TS 17665-3:2013 | Sterilization of health care products — Moist heat — Part 3: Guidance on the designation of a medical device to a product family and processing category for steam sterilization |
ISO 19372:2015 | Microturbines applications — Safety |
ISO 22006:2009 | Quality management systems — Guidelines for the application of ISO 9001:2008 to crop production |
ISO 55002:2014 | Asset management Management systems Guidelines for the application of ISO 55001 |
ISO 39001:2012 | Road traffic safety (RTS) management systems — Requirements with guidance for use |
ISO 28007-1:2015 | Ships and marine technology — Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) — Part 1: General |
ISO 20140-1:2013 | Automation systems and integration Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Part 1: Overview and general principles |
ISO/IEC Guide 76:2008 | Development of service standards Recommendations for addressing consumer issues |
UNE-EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
BS EN ISO 11137-1:2015 | Sterilization of health care products. Radiation Requirements for development, validation and routine control of a sterilization process for medical devices |
ISO 18788:2015 | Management system for private security operations Requirements with guidance for use |
IEC 61249-2-33:2009 | Materials for printed boards and other interconnecting structures - Part 2-33: Reinforced base materials, clad and unclad - Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 4,1 at 1 GHz) and flammability (vertical burning test), copper-clad |
S.R. OHSAS 18001:2007 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS |
ISO 24512:2007 | Activities relating to drinking water and wastewater services — Guidelines for the management of drinking water utilities and for the assessment of drinking water services |
ISO 21789:2009 | Gas turbine applications — Safety |
IEC 61249-2-19:2001 | Materials for printed boards and other interconnecting structures - Part 2-19: Reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test), copper clad |
IECQ 03-1:2012 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 1: GENERAL REQUIREMENTS FOR ALL IECQ SCHEMES |
IEC TR 62139:2004 | Guidelines for the addition of environmental aspects in product standards specitif to TC 23 |
I.S. EN 16001:2009 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
DIN EN 12583:2014-07 | GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
DIN EN 12186:2014-12 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
IEC 61249-4-19:2013 | Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
ISO 24511:2007 | Activities relating to drinking water and wastewater services — Guidelines for the management of wastewater utilities and for the assessment of wastewater services |
BS EN ISO 21809-2:2014 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Single layer fusion-bonded epoxy coatings |
IEC 61249-2-41:2010 | Materials for printed boards and other interconnecting structures - Part 2-41: Reinforced base materials clad and unclad - Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
BS EN ISO 13702:2015 | Petroleum and natural gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines |
UNE-EN ISO/IEC 17021:2011 | Conformity assessment - Requirements for bodies providing audit and certification of management systems (ISO/IEC 17021:2011) |
CEN/TS 16524:2013 | Mechanical products - Methodology for reduction of environmental impacts in product design and development |
I.S. EN ISO 14040:2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
EN ISO 14050:2010 | Environmental management - Vocabulary (ISO 14050:2009) |
IEC 60794-1-1:2015 RLV | Optical fibre cables - Part 1-1: Generic specification - General |
EN ISO 14040:2006 | Environmental management - Life cycle assessment - Principles and framework (ISO 14040:2006) |
EN 60601-1-9:2008/A1:2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-9: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 60601-1-9:2007/A1:2013) |
I.S. EN ISO 9000:2015 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
UNE-EN 16125:2016 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
EN 16001:2009 | Energy management systems - Requirements with guidance for use |
EN ISO 21809-2:2014 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014) |
EN ISO/IEC 17021-1:2015 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 1: Requirements (ISO/IEC 17021-1:2015) |
UNI EN 14334 : 2014 | LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS |
UNI EN 12186 : 2014 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
UNI EN ISO 10418 : 2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - ANALYSIS, DESIGN, INSTALLATION AND TESTING OF BASIC SURFACE PROCESS SAFETY SYSTEMS |
BS OHSAS 18002:2008 | Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007 |
UNI EN ISO 14937 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
BS 7799-2(2005) : 2005 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - REQUIREMENTS |
CSA CE CODE SAFETY PACKAGE : 2012 | CE CODE SAFETY PACKAGE |
UNI EN 12583 : 2014 | GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
UNI EN ISO 15743 : 2008 | ERGONOMICS OF THE THERMAL ENVIRONMENT - COLD WORKPLACES - RISK ASSESSMENT AND MANAGEMENT |
UNI ISO 13053-2 : 2014 | QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 2: TOOLS AND TECHNIQUES |
ASTM E 3032 : 2015 | Standard Guide for Climate Resiliency Planning and Strategy |
BS EN ISO 14024:2001 | Environmental labels and declarations. Type I environmental labelling. Principles and procedures |
CEI EN 61249-4-19 : 2014 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-19: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HICH PERFORMANCE NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
BIS IS/ISO/TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
BS ISO 55001:2014 | Asset management. Management systems. Requirements |
BS ISO 37101:2016 | Sustainable development in communities. Management system for sustainable development. Requirements with guidance for use |
BS EN ISO 15589-2:2014 | Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline transportation systems Offshore pipelines |
PD CEN/TR 15628:2007 | Maintenance. Qualification of maintenance personnel |
BS ISO 13053-2:2011 | Quantitative methods in process improvement. Six Sigma Tools and techniques |
BS ISO 15392:2008 | Sustainability in building construction. General principles |
CSA C22.2 No. 60601-1-9 : 2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-9: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR ENVIRONMENTALLY CONSCIOUS DESIGN |
DIN EN 15628:2014-10 | MAINTENANCE - QUALIFICATION OF MAINTENANCE PERSONNEL |
12/30241112 DC : DRAFT JAN 2012 | BS EN ISO 14031 - ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES |
10/30235537 DC : 0 | BS EN 61249-4-18 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-18: SECTIONAL SPECIFICATION SET FOR PREPEG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HIGH PERFORMANCE EPOXIDE WOVEN E-GLASS PREPEG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
CSA Z24512 : 2010 : R2014 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF DRINKING WATER UTILITIES AND FOR THE ASSESSMENT OF DRINKING WATER SERVICES |
04/30105027 DC : DRAFT JUNE 2004 | ISO 21789 - GAS TURBINES - SAFETY |
PD CLC/TR 62125:2008 | Environmental statement specific to TC 20. Electric cables |
DIN EN 15221-4:2011-12 | Facility Management - Part 4: Taxonomy, Classification and Structures in Facility Management |
BS EN 61249-2-22:2005 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
BS ISO 10987:2012 | Earth-moving machinery. Sustainability. Terminology, sustainability factors and reporting |
CEI EN 61249-2-21 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-21: REINFORCED BASE MATERIALS, CLAD AND UNCLAD NON-HALOGENATED EPOXIDE WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
05/30084682 DC : DRAFT MAR 2005 | BS ISO 21930 - SUSTAINABILITY IN BUILDING CONSTRUCTION - ENVIRONMENTAL DECLARATION OF BUILDING PRODUCTS |
09/30199026 DC : 0 | BS ISO/IEC 17021-2 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS AND REQUIREMENTS FOR THIRD-PARTY CERTIFICATION AUDITING OF MANAGEMENT SYSTEMS - PART 2: REQUIREMENTS FOR THIRD PARTY CERTIFICATION AUDITING OF MANAGEMENT SYSTEMS |
BS EN ISO 12736:2014 | Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
13/30286753 DC : 0 | BS ISO 22004 - FOOD SAFETY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 22000 |
I.S. ISO 15489-1:2004 | INFORMATION AND DOCUMENTATION - RECORDS MANAGEMENT - PART 1: GENERAL |
01/704864 DC : DRAFT MAR 2001 | PREN ISO 10418 - PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - ANALYSIS, DESIGN, INSTALLATION AND TESTING OF BASIC SURFACE PROCESS SAFETY SYSTEMS |
BS ISO 16142-2:2017 | Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards |
AJEPP-7 : 2015 | BEST ENVIRONMENTAL PROTECTION PRACTICES FOR SUSTAINABILITY OF MILITARY TRAINING AREAS |
UNI EN ISO 21809-5 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
CSA PLUS 1146 : 2000 | GUIDE TO ISO 14001 IMPLEMENTATION IN THE AUTOMOTIVE PARTS MANUFACTURING SECTOR |
AAMI ISO 11137-1 : 2006 : INC : AMD 1 : 2013 : R201000 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
09/30210904 DC : 0 | BS EN 61249-2-27 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-27: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BISMALEMIDE/TRIAZINE MODIFIED WITH NON-HALOGENATED EPOXIDE WOVEN GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
IEC TS 62607-4-4:2016 | Nanomanufacturing - Key control characteristics - Part 4-4: Nano-enabled electrical energy storage - Thermal characterization of nanomaterials, nail penetration method |
BIP 2020 : 2014 | THE BUSINESS IMPROVEMENT HANDBOOK |
CAN/CSA-ISO/IEC/IEEE 15288:16 | Systems and software engineering - System life cycle processes (Adopted ISO/IEC/IEEE 15288:2015, first edition, 2015-05-15) |
DIN 33870-2:2013-12 | OFFICE MACHINES - REQUIREMENTS AND TESTS FOR THE PREPARATION OF REFILLED TONER MODULES FOR ELECTROPHOTOGRAPHICAL PRINTER, COPIERS AND FACSIMILE MACHINES - PART 2: 4-COLOUR-PRINTERS |
CSA ISO 14010 : 0 | GUIDELINES FOR ENVIRONMENTAL AUDITING - GENERAL PRINCIPLES |
UNI CEI ISO/IEC TS 17021-4 : 2014 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 4: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF EVENT SUSTAINABILITY MANAGEMENT SYSTEMS |
I.S. EN ISO 21809-1:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP) |
CSA INFORMATION SECURITY PACKAGE : 2018 | CONSISTS OF CAN/CSA-ISO/IEC 27000:18 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY; CAN/CSA-ISO/IEC 27001:14, INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - REQUIREMENTS; CAN/CSA-ISO/IEC 27002:15 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CODE OF PRACTICE FOR INFORMATION |
03/109280 DC : DRAFT AUG 2003 | BS ISO 14004 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON PRINCIPLES, SYSTEMS AND SUPPORTING TECHNIQUES |
AAMI ISO TIR 17665-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1 |
BS ISO 50001 : 2011 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
GS NFV-REL 005 : 1.1.1 | NETWORK FUNCTIONS VIRTUALISATION (NFV); ACCOUNTABILITY; REPORT ON QUALITY ACCOUNTABILITY FRAMEWORK |
BS EN 61249-2-7:2002 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad |
09/30210900 DC : 0 | BS EN 61249-2-40 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-40: REINFORCED BASE MATERIALS CLAD AND UNCLAD - HIGH PERFORMANCE, MODIFIED, NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
BS ISO 20121:2012 | Event sustainability management systems. Requirements with guidance for use |
11/30242519 DC : DRAFT JAN 2011 | BS ISO/IEC 29142-3 - CARTRIDGE CHARACTERIZATION STANDARD - PART 3: ENVIRONMENT |
DIN EN ISO 15544:2010-11 | Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response (ISO 15544:2000, including Amd 1:2009) |
I.S. EN ISO 11135-1:2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
CEI EN 61249-2-1 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-1: REINFORCED BASE MATERIALS, CLAD AND UNCLAD PHENOLIC CELLULOSE PAPER REINFORCED LAMINATED SHEETS,ECONOMIC GRADE, COPPER CLAD |
UNE-ISO 21930:2010 | Sustainability in building construction. Environmental declaration of building products |
12/30217456 DC : 0 | BS ISO 20140-1 - AUTOMATION SYSTEMS AND INTEGRATION - ENVIRONMENTAL AND ENERGY EFFICIENCY EVALUATION METHOD FOR MANUFACTURING SYSTEMS - PART 1: OVERVIEW AND GENERAL PRINCIPLES |
11/30230642 DC : 0 | BS ISO 18604 - PACKAGING AND THE ENVIRONMENT - MATERIAL RECYCLING |
PD IEC/TS 62607-4-4:2016 | Nanomanufacturing. Key control characteristics Nano-enabled electrical energy storage. Thermal characterization of nanomaterials, nail penetration method |
CEN/TS 15399:2007 | Gas Supply Systems - Guidelines for Management systems for Gas Distribution Network |
UNE-EN ISO/IEC 17021-1:2015 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 1: Requirements (ISO/IEC 17021-1:2015) |
BS ISO 13065:2015 | Sustainability criteria for bioenergy |
09/30201049 DC : 0 | BS EN 61249-2-41 ED.1 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-41: REINFORCED BASED MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
00/625224 DC : DRAFT SEP 2000 | ISO/DIS 15489 INFORMATION AND DOCUMENTATION - RECORDS MANGEMENT |
I.S. EN IEC 61249-2-46:2018 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-46: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF THERMAL CONDUCTIVITY (1.0W/M K) AND DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
I.S. EN 14969:2006 | RAILWAY APPLICATIONS - TRACK - QUALIFICATION SYSTEM FOR RAILWAY TRACKWORK CONTRACTORS |
I.S. EN 50598-3:2015 | ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS |
16/30312210 DC : 0 | BS ISO 6707-3 - BUILDINGS AND CIVIL ENGINEERING WORKS - VOCABULARY - PART 3: SUSTAINABILITY TERMS |
BS EN 62040-4:2013 | Uninterruptible power systems (UPS) Environmental aspects. Requirements and reporting |
UNE-ISO 26000:2012 | Guidance on social responsibility |
CEI CLC/TR 62125 : 2011 | ENVIRONMENTAL STATEMENT SPECIFIC TO TC 20 - ELECTRIC CABLES |
DIN EN 16887 E : 2017 | LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
14/30273523 DC : 0 | BS EN ISO 9001 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
ISO 28002:2011 | Security management systems for the supply chain — Development of resilience in the supply chain — Requirements with guidance for use |
ISO 55001:2014 | Asset management — Management systems — Requirements |
13/30284114 DC : 0 | BS EN 61249-2-43 ED.1 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-43: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGEN EPOXIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
BS EN ISO 15378:2017 | Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
UNE-CEN/TR 15983:2011 IN | Stationary source emissions - Guidance on the application of EN 14181:2004 |
BS EN 15628:2014 | Maintenance. Qualification of maintenance personnel |
15/30283967 DC : 0 | BS ISO 21067-2 - PACKAGING - VOCABULARY - PART 2: PACKAGING AND THE ENVIRONMENT TERMS |
BS EN 61249-2-11:2003 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
PD ISO/TS 37151:2015 | Smart community infrastructures. Principles and requirements for performance metrics |
BS EN 60076-1:2011 | Power transformers General |
BS EN ISO/IEC 17021-1:2015 | Conformity assessment. Requirements for bodies providing audit and certification of management systems Requirements |
S.R. CEN TR 15592:2007 | HEALTH SERVICES - QUALITY MANAGEMENT SYSTEMS - GUIDE FOR THE USE OF EN ISO 9004:2000 IN HEALTH SERVICES FOR PERFORMANCE IMPROVEMENT |
OHSAS 18002:2000 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001:2007 |
CSA ISO 14015:2002 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL ASSESSMENT OF SITES AND ORGANIZATIONS (EASO) |
CEN/TR 15809:2008 | Characterization of sludges - Hygienic aspects - Treatments |
17/30341961 DC : 0 | BS EN ISO 14067 - GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION |
BS EN ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries. Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics |
08/30180551 DC : DRAFT APR 2008 | BS OHSAS 18002 - OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001:2007 |
BS EN 16214-1:2012 | Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers Terminology |
BS EN 61249-4-2:2005 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad. Multifunctional expoxide woven E-glass prepeg of defined flammability |
BS EN 61249-2-41:2010 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
BS EN 62542:2013 | Environmental standardization for electrical and electronic products and systems. Glossary of terms |
ASTM E 2773 : 2011 | Standard Specification for Evaluation and Selection of Food and Beverage for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences (Withdrawn 2020) |
UNI CEI CEN/TS 45545-2 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
07/30164065 DC : 0 | BS ISO 24699 - RUBBER AND RUBBER PRODUCTS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS |
DIN EN ISO 14063:2010-10 | Environmental management - Environmental communication - Guidelines and examples (ISO 14063:2006); German version EN ISO 14063:2010 |
BS EN ISO 17989-1:2015 | Tractors and machinery for agriculture and forestry. Sustainability Principles |
14/30299515 DC : 0 | BS EN 16747 - MARITIME AND PORT SECURITY SERVICES |
BIP 3093 : 2013 | THE RISK MANAGEMENT STANDARDS AND GUIDANCE COLLECTION |
BS EN 61249-2-27:2013 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad |
02/210156 DC : DRAFT OCT 2002 | IEC 61249-2-26 ED.1 - MATERIALS FOR INTERCONNECTION STRUCTURES - PART 2-26: SECTIONAL SPECIFICATION SET FOR REINFORCED BASE MATERIALS, CLAD AND UNCLAD - SECTION 26: NON-HALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
DIN ISO 28000:2015-08 | Specification for security management systems for the supply chain (ISO 28000:2007) |
BS ISO 50007:2017 | Energy services. Guidelines for the assessment and improvement of the energy service to users |
I.S. EN 62542:2013 | ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - GLOSSARY OF TERMS (IEC 62542:2013 (EQV)) |
PD ISO/TS 21929-2:2015 | Sustainability in building construction. Sustainability indicators Framework for the development of indicators for civil engineering works |
S.R. CEN ISO/TS 14067:2014 | GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION (ISO/TS 14067:2013) |
UNE-EN 60794-1-1:2016 | Optical fibre cables - Part 1-1: Generic specification - General |
BS ISO 21067-2:2015 | Packaging. Vocabulary Packaging and the environment terms |
09/30211075 DC : 0 | BS EN 61249-2-39 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-39: REINFORCED BASE MATERIALS CLAD AND UNCLAD - HIGH PERFORMANCE EPOXCIDE AND NON-EPOXICDE, WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
BIS IS/ISO 19011 : 2011(R2016) | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
ISO/IEC/IEEE 15288:2015 | Systems and software engineering — System life cycle processes |
CSA ISO 9004 : 2009 | MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
ISO 37153:2017 | Smart community infrastructures — Maturity model for assessment and improvement |
UNI EN 16348 : 2013 | GAS INFRASTRUCTURE - SAFETY MANAGEMENT SYSTEM (SMS) FOR GAS TRANSMISSION INFRASTRUCTURE AND PIPELINE INTEGRITY MANAGEMENT SYSTEM (PIMS) FOR GAS TRANSMISSION PIPELINES - FUNCTIONAL REQUIREMENTS |
BS ISO 14063 : 2006 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL COMMUNICATION - GUIDELINES AND EXAMPLES |
UNI CEN ISO/TS 29001 : 2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS |
08/30143668 DC : DRAFT DEC 2008 | BS EN ISO 14005 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR THE PHASED IMPLEMENTATION OF AN ENVIRONMENTAL MANAGEMENT SYSTEM, INCLUDING THE USE OF ENVIRONMENTAL PERFORMANCE EVALUATION |
S.R. CEN TR 15983:2010 | STATIONARY SOURCE EMISSIONS - GUIDANCE ON THE APPLICATION OF EN 14181:2004 |
16/30326000 DC : 0 | BS ISO/IEC 19770-1 - INFORMATION TECHNOLOGY - IT ASSET MANAGEMENT - PART 1: IT ASSET MANAGEMENT SYSTEMS - REQUIREMENTS |
IEC 61249-2-10:2003 | Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
UNI CEI CEN/TS 45545-1 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 1: GENERAL |
IEC PAS 62686-2:2016 | Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components |
DD IEC/PAS 62545:2008 | Environmental information on electrical and electronic equipment (EIEEE) |
CSA ISO 19011 : 2012 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
ISO Guide 64:2008 | Guide for addressing environmental issues in product standards |
CAN/CSA-Z767-17 | Process safety management |
PREN 9130 : 200P1 | AEROSPACE SERIES - QUALITY SYSTEMS - RECORD RETENTION |
CSA ISO/TR 13121 : 2013 : R2017 | NANOTECHNOLOGIES - NANOMATERIAL RISK EVALUATION |
CSA N288.5 : 2011 | EFFLUENT MONITORING PROGRAMS AT CLASS 1 NUCLEAR FACILITIES AND URANIUM MINES AND MILLS |
CSA ISO 14044 :2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES |
16/30334735 DC : 0 | BS EN 15224 - HEALTH CARE SERVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS BASED ON EN ISO 9001:2015 |
UNE-EN ISO 14015:2010 | Environmental management - Environmental assessment of sites and organizations (EASO) (ISO 14015:2001) |
UNE-EN ISO 11135:2015 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
BIS IS/ISO 9000 : 2015 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY |
CEI EN 61249-2-26 : 2005 | MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-26: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES RENFORCEES EN TISSU DE VERRE DE TYPE EPOXYDE TISSE/NON TISSE, NON-HALOGENE, D'INFLAMMABILITE DEFINIE (ESSAI DE COMBUSTION VERTICALE), PLAQUEES CUIVRE |
NSF 342 : 2014 | SUSTAINABILITY ASSESSMENT FOR WALLCOVERING PRODUCTS |
DD CEN/TS 45545-2:2009 | Railway applications. Fire protection on railway vehicles Requirements for fire behaviour of materials and components |
UNE-EN ISO 14051:2012 | Environmental management. Material flow cost accounting. General framework (ISO 14051:2011) |
ISO/IEC 19770-1:2017 | Information technology — IT asset management — Part 1: IT asset management systems — Requirements |
CEI EN 61249-2-42 : 2011 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-42: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN / WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
UNE-EN ISO 21809-1:2011 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011) |
UNE-ISO 22004:2015 | Food safety management systems. Guidance on the application of ISO 22000 |
CSA SPE 7008 : 2018 | SUSTAINABILITY STANDARD FOR HOUSEHOLD DEHUMIDIFIER APPLIANCES |
UNI EN 15530 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EVIRONMENTAL ASPECTS OF ALUMINIUM PRODUCTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS |
IWA 13:2014 | Multiple resource evaluation guideline |
I.S. EN IEC 61249-2-47:2018 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-47: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF THERMAL CONDUCTIVITY (2.0W/M K) AND DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
UNI ISO/TS 22003 : 2014 | FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF FOOD SAFETY MANAGEMENT SYSTEMS |
DEFSTAN 00-56(PT2)/3(2004) : INTERIM | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE ON ESTABLISHING A MEANS OF COMPLYING WITH PART 1 |
AAMI/ISO TIR17665-2:2009(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1 |
S.R. CEN TR 15628:2007 | MAINTENANCE - QUALIFICATION OF MAINTENANCE PERSONNEL |
I.S. EN ISO 23936-1:2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
UNI EN ISO 15544 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - REQUIREMENTS AND GUIDELINES FOR EMERGENCY RESPONSE |
ISO Guide 82:2014 | Guidelines for addressing sustainability in standards |
PREN 15224 : DRAFT 2016 | HEALTH CARE SERVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS BASED ON EN ISO 9001:2015 |
BS ISO 26000:2010 | Guidance on social responsibility |
I.S. EN 61249-2-19:2002 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-19: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - EPOXIDE CROSS-PLIED LINEAR FIBREGLASS-REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) COPPER CLAD |
IWA 26:2017 | Using ISO 26000:2010 in management systems |
ISO/PAS 30004:2011 | Ships and marine technology Ship recycling management systems - Guidelines for the implementation of ISO 30000 |
I.S. EN 16214-1:2012 | SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 1: TERMINOLOGY |
PD ISO/TS 19930:2017 | Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6 |
ISO/TR 13121:2011 | Nanotechnologies — Nanomaterial risk evaluation |
ISO 13485 - PRACTICAL GUIDE : 2016 | ISO 13485:2016 - MEDICAL DEVICES - A PRACTICAL GUIDE |
NSF 347 : 2012 | SUSTAINABILITY ASSESSMENT FOR SINGLE PLY ROOFING MEMBRANES |
IEC TS 62686-1:2015 | Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and discrete semiconductors |
I.S. EN 61249-4-19:2013 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-19: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HIGH PERFORMANCE NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
I.S. EN 61249-2-7:2002 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
CEI EN 60076-1 : 2015 | POWER TRANSFORMERS - PART 1: GENERAL |
NSF 332 : 2015 | SUSTAINABILITY ASSESSMENT FOR RESILIENT FLOOR COVERINGS |
UNI EN ISO 11135 : 2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
BS EN ISO/IEC 17011:2017 | Conformity assessment. Requirements for accreditation bodies accrediting conformity assessment bodies |
BS ISO 26367-1:2011 | Guidelines for assessing the adverse environmental impact of fire effluents General |
CEI EN 62430 : 2011 | ENVIRONMENTALLY CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS |
I.S. EN 62040-4:2013 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING (IEC 62040-4:2013 (EQV)) |
IECQ 03-6:2012 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 6: IECQ ITL SCHEME - INDEPENDENT TESTING LABORATORY ASSESSMENT PROGRAM REQUIREMENTS |
ASTM E 2745 : 2011 | Standard Specification for Evaluation and Selection of Audio Visual (AV) and Production for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences (Withdrawn 2020) |
ECMA/TR 70 : 3ED 2004 | PRODUCT-RELATED ENVIRONMENTAL DECLARATION |
UNE-ISO/IEC 17021-2:2018 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 2: Competence requirements for auditing and certification of environmental management systems |
UNI EN ISO 14031 : 2013 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES |
ISO/IEC TS 17021-4:2013 | Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 4: Competence requirements for auditing and certification of event sustainability management systems |
UNI CEI EN ISO 50001 : 2011 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
ISO/TS 21931-1:2006 | Sustainability in building construction Framework for methods of assessment for environmental performance of construction works Part 1: Buildings |
ISO/TS 37151:2015 | Smart community infrastructures — Principles and requirements for performance metrics |
PREN 15399 : DRAFT 2016 | GAS INFRASTRUCTURE - SAFETY MANAGEMENT SYSTEMS FOR GAS NETWORKS WITH MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR |
ISO/IEC 40180:2017 | Information technology — Quality for learning, education and training — Fundamentals and reference framework |
ISO 20858:2007 | Ships and marine technology — Maritime port facility security assessments and security plan development |
ISO 21809-4:2009 | Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 4: Polyethylene coatings (2-layer PE) |
ISO 18602:2013 | Packaging and the environment — Optimization of the packaging system |
UNI EN ISO 22301 : 2014 | SOCIETAL SECURITY - BUSINESS CONTINUITY MANAGEMENT SYSTEMS - REQUIREMENTS |
ISO 30302:2015 | Information and documentation Management systems for records Guidelines for implementation |
I.S. EN ISO 14004:2016 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON IMPLEMENTATION (ISO 14004:2016) |
IEC 61249-2-45:2018 | Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly |
I.S. EN ISO 15743:2008 | ERGONOMICS OF THE THERMAL ENVIRONMENT - COLD WORKPLACES - RISK ASSESSMENT AND MANAGEMENT |
IWA 12:2013 | Guidelines on the application of ISO 9001:2008 in policing organizations |
IEC 61249-2-47:2018 | Materials for printed boards and other interconnecting structures - Part 2-47: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly |
IEC TR 62476:2010 | Guidance for evaluation of product with respect to substance-use restrictions in electrical and electronic products |
I.S. EN ISO 14006:2011 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN |
I.S. EN 62075:2012 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012 (EQV)) |
I.S. EN 60601-1-9:2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-9: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 60601-1-9:2007 (EQV)) |
IEC TS 62668-2:2016 | Process management for avionics - Counterfeit prevention - Part 2: Managing electronic components from non-franchised sources |
UNE-EN ISO 21809-1:2019 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018) |
DIN EN ISO 9000:2015-11 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
DIN EN 12940:2004-11 | Footwear manufacturing wastes - Waste classification and management |
DIN EN ISO 14040:2009-11 | Environmental management - Life cycle assessment - Principles and framework (ISO 14040:2006); German and English version EN ISO 14040:2006 |
IEC 61249-2-35:2008 | Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
PD IEC/PAS 62686-2:2016 | Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications General requirements for passive components |
BS EN ISO 17776:2016 | Petroleum and natural gas industries. Offshore production installations. Major Accident hazard management during the design of new installations |
BS EN ISO 14012:1996 | Guidelines for environmental auditing. Qualification criteria for environmental auditors |
IEC 62542:2013 | Environmental standardization for electrical and electronic products and systems - Glossary of terms |
BS EN 12583:2014 | Gas Infrastructure. Compressor stations. Functional requirements |
ISO 26000:2010 | Guidance on social responsibility |
ISO 22301:2012 | Societal security Business continuity management systems Requirements |
ISO 21809-2:2014 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings |
BS EN 12186:2014 | Gas infrastructure. Gas pressure regulating stations for transmission and distribution. Functional requirements |
IEC 61249-2-30:2012 | Materials for printed boards and other interconnecting structures - Part 2-30: Reinforced base materials clad and unclad - Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad |
IEC 61249-2-37:2008 | Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
ISO 14045:2012 | Environmental management — Eco-efficiency assessment of product systems — Principles, requirements and guidelines |
IEC 61249-2-44:2016 | Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
ISO 14644-4:2001 | Cleanrooms and associated controlled environments — Part 4: Design, construction and start-up |
BS EN 14654-1:2014 | Management and control of operational activities in drain and sewer systems outside buildings Cleaning |
UNE-EN ISO/IEC 17011:2017 | Conformity assessment - Requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2017) |
BS EN ISO 14040:2006 | Environmental management. Life cycle assessment. Principles and framework |
BS EN ISO 10418:2003 | Petroleum and natural gas industries. Offshore production Installations. Analysis, design, installation and testing of basic surface process safety systems |
ISO 14015:2001 | Environmental management Environmental assessment of sites and organizations (EASO) |
UNE-EN 60076-1:2013 | Power transformers - Part 1: General |
BS EN ISO 17665-1:2006 | Sterilization of health care products. Moist heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
BS EN 12940:2004 | Footwear manufacturing wastes. Waste classification and management |
BS EN ISO 14937:2009 | Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
UNE-EN ISO 22301:2015 | Societal security - Business continuity management systems - Requirements (ISO 22301:2012) |
NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
UNE-EN 14654-1:2015 | Management and control of operational activities in drain and sewer systems outside buildings - Part 1: Cleaning |
ISO 14025:2006 | Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
BS EN ISO 14010:1996 | Guidelines for environmental auditing. General principles |
UNI EN ISO 14063 : 2010 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL COMMUNICATION - GUIDELINES AND EXAMPLES |
BS ISO 19372:2015 | Microturbines applications. Safety |
UNE-EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
EN ISO 14063:2010 | Environmental management - Environmental communication - Guidelines and examples (ISO 14063:2006) |
ISO 14063:2006 | Environmental management Environmental communication Guidelines and examples |
IEC 61249-2-22:2005 | Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
ISO 19600:2014 | Compliance management systems Guidelines |
ISO 14011:1996 | Guidelines for environmental auditing Audit procedures Auditing of environmental management systems |
ISO 15743:2008 | Ergonomics of the thermal environment Cold workplaces Risk assessment and management |
ISO 15544:2000 | Petroleum and natural gas industries — Offshore production installations — Requirements and guidelines for emergency response |
IEC 62040-4:2013 | Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting |
ISO 13053-2:2011 | Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques |
UNE-EN 12583:2014 | Gas Infrastructure - Compressor stations - Functional requirements |
IEC 61249-2-36:2008 | Materials for printed boards and other interconnecting structures - Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
IEC 61193-3:2013 | Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
ISO/IEC 15504-6:2013 | Information technology Process assessment Part 6: An exemplar system life cycle process assessment model |
IEC 61249-2-42:2010 | Materials for printed boards and other interconnecting structures - Part 2-42: Reinforced base materials clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
ISO 14040:2006 | Environmental management Life cycle assessment Principles and framework |
UNE-ISO 13053-2:2012 | Quantitative methods in process improvement -- Six Sigma -- Part 2: Tools and techniques |
ISO 14012:1996 | Guidelines for environmental auditing Qualification criteria for environmental auditors |
IEC 60076-1:2011 | Power transformers - Part 1: General |
ISO 14004:2016 | Environmental management systems General guidelines on implementation |
IEC 62075:2012 | Audio/video, information and communication technology equipment - Environmentally conscious design |
ISO 17776:2016 | Petroleum and natural gas industries Offshore production installations Major accident hazard management during the design of new installations |
IEC 61249-2-39:2012 | Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
ISO 20121:2012 | Event sustainability management systems — Requirements with guidance for use |
IEC 60601-1-9:2007+AMD1:2013 CSV | Medical electrical equipment - Part 1-9: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design |
IEC 61249-2-23:2005 | Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad |
IEC 60601-1-10:2007+AMD1:2013 CSV | Medical electrical equipment - Part 1-10: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loopcontrollers |
ISO/IEC 17021:2011 | Conformity assessment Requirements for bodies providing audit and certification of management systems |
IEC 61249-2-8:2003 | Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
IEC 61249-2-38:2008 | Materials for printed boards and other interconnecting structures - Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
ISO 14010:1996 | Guidelines for environmental auditing General principles |
UNE-EN ISO 14937:2010 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
UNE-ISO 18091:2015 | Quality management systems -- Guidelines for the application of ISO 9001:2008 in local government |
ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics |
IEC 61249-2-27:2012 | Materials for printed boards and other interconnecting structures - Part 2-27: Reinforced base materials clad and unclad - Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad |
UNE EN 16309 : 0 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
UNE-EN ISO 50001:2011 | Energy management systems - Requirements with guidance for use (ISO 50001:2011) |
IEC 61249-4-2:2005 | Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability |
ISO 9001:2015 | Quality management systems — Requirements |
PD IEC/TS 62668-2:2016 | Process management for avionics. Counterfeit prevention Managing electronic components from non-franchised sources |
ISO 12736:2014 | Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
PD IEC/TS 62686-1:2015 | Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications General requirements for high reliability integrated circuits and discrete semiconductors |
IEC 61249-2-4:2001 | Materials for printed boards and other interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad |
IEC 61249-4-1:2008 | Materials for printed boards and other interconnecting structures - Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability |
UNE-ISO 55001:2015 | Asset management. Management systems. Requirements. |
ISO 14042:2000 | Environmental management Life cycle assessment Life cycle impact assessment |
16/30282349 DC : 0 | BS ISO 35101 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OPERATIONS - WORKING ENVIRONMENT |
ISO/TS 14067:2013 | Greenhouse gases Carbon footprint of products Requirements and guidelines for quantification and communication |
ISO/IEC 17021-1:2015 | Conformity assessment Requirements for bodies providing audit and certification of management systems Part 1: Requirements |
UNE-EN ISO 14031:2015 | Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:2013) |
ISO 14050:2009 | Environmental management Vocabulary |
EN ISO 14015:2010 | Environmental management - Environmental assessment of sites and organizations (EASO) (ISO 14015:2001) |
EN 16751:2016 | Bio-based products - Sustainability criteria |
EN 14717:2005 | Welding and allied processes - Environmental check list |
EN ISO 10012:2003 | Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003) |
EN 15530:2008 | Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards |
EN 16887:2017 | Leather - Environmental footprint - Product Category Rules (PCR) - Carbon footprints |
EN ISO 11135-1:2007 | Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007) |
EN ISO 15544:2010 | Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response (ISO 15544:2000, including Amd 1:2009) |
EN ISO 14042 : 2000 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - LIFE CYCLE IMPACT ASSESSMENT |
EN 16214-1:2012 | Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology |
EN ISO 15589-2:2014 | Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012) |
EN ISO 22301:2014 | Societal security - Business continuity management systems - Requirements (ISO 22301:2012) |
EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
EN 16631:2015 | LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Reconditioning requirements |
EN ISO 21809-1:2011 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011) |
EN ISO 17989-1:2015 | Tractors and machinery for agriculture and forestry - Sustainability - Part 1: Principles (ISO 17989-1:2015) |
EN 16747:2015 | Maritime and port security services |
EN ISO 14012 : 1996 | GUIDELINES FOR ENVIRONMENTAL AUDITING - QUALIFICATION CRITERIA FOR ENVIRONMENTAL AUDITORS |
EN 16309:2014+A1:2014 | Sustainability of construction works - Assessment of social performance of buildings - Calculation methodology |
EN 16125:2015 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
EN ISO 14010 : 1996 | GUIDELINES FOR ENVIRONMENTAL AUDITING - GENERAL PRINCIPLES |
EN 14969:2006 | Railway applications - Track - Qualification system for railway trackwork contractors |
EN ISO 14045:2012 | Environmental management - Eco-efficiency assessment of product systems - Principles, requirements and guidelines (ISO 14045:2012) |
EN ISO 14051:2011 | Environmental management - Material flow cost accounting - General framework (ISO 14051:2011) |
EN ISO 17776:2016 | Petroleum and natural gas industries - Offshore production installations - Major Accident hazard management during the design of new installations (ISO 17776:2016) |
EN ISO 14644-4:2001 | Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up (ISO 14644-4:2001) |
EN ISO 14004:2016 | Environmental management systems - General guidelines on implementation (ISO 14004:2016) |
EN ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009) |
EN ISO 12736:2014 | Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014) |
EN 14334:2014 | LPG equipment and accessories - Inspection and testing of LPG road tankers |
EN ISO 15743:2008 | Ergonomics of the thermal environment - Cold workplaces - Risk assessment and management (ISO 15743:2008) |
EN ISO/IEC 17021:2011 | Conformity assessment - Requirements for bodies providing audit and certification of management systems (ISO/IEC 17021:2011) |
EN ISO 17665-1:2006 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
EN ISO 14011 : 1996 | GUIDELINES FOR ENVIRONMENTAL AUDITING - AUDIT PROCEDURES - AUDITING OF ENVIRONMENTAL MANAGEMENT SYSTEMS |
EN ISO 14025:2010 | Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006) |
EN 15221-4:2011 | Facility Management - Part 4: Taxonomy, Classification and Structures in Facility Management |
SAE AS9120B | Quality Management Systems – Requirements for Aviation, Space, and Defense Distributors |
S.R. CEN/TS 45545-1:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
17/30355188 DC : 0 | BS ISO/IEC 24748-1 - SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE MANAGEMENT - PART 1: GUIDELINES FOR LIFE CYCLE MANAGEMENT |
CSA Z24512 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF DRINKING WATER UTILITIES AND FOR THE ASSESSMENT OF DRINKING WATER SERVICES |
I.S. EN ISO 14063:2010 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL COMMUNICATION - GUIDELINES AND EXAMPLES |
UNE-EN 62075:2013 | Audio/video, information and communication technology equipment - Environmentally conscious design |
BS ISO 18400-103:2017 | Soil quality. Sampling Safety |
PD IEC/TS 62668-1:2016 | Process management for avionics. Counterfeit prevention Avoiding the use of counterfeit, fraudulent and recycled electronic components |
DIN EN ISO 17989-1:2016-09 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SUSTAINABILITY - PART 1: PRINCIPLES (ISO 17989-1:2015) |
ISO 55000:2014 | Asset management — Overview, principles and terminology |
DIN ISO 26000:2011-01 | Guidance on social responsibility (ISO 26000:2010) |
15/30313954 DC : 0 | BS ISO 16813 - BUILDING ENVIRONMENT DESIGN - INDOOR ENVIRONMENT - GENERAL PRINCIPLES |
BS EN 50598-3:2015 | Ecodesign for power drive systems, motor starters, power electronics and their driven applications Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations |
ISO/TS 16949:2009 | Quality management systems Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations |
IWA 17:2014 | Information and operations security and integrity requirements for lottery and gaming organizations |
BS ISO 21809-4:2009 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyethylene coatings (2-layer PE) |
BS EN 61249-2-36:2009 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
ANSI/MSE 2000 : 2008 | A MANAGEMENT SYSTEM FOR ENERGY |
UNI EN ISO 21809-2 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION-BONDED EPOXY COATINGS |
BS EN 15221-4:2011 | Facility management Taxonomy, classification and structures in facility management |
BS EN ISO 15743:2008 | Ergonomics of the thermal environment. Cold workplaces. Risk assessment and management |
18/30358588 DC : 0 | BS EN ISO 29001 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS |
DIN EN 15628 E : 2014 | MAINTENANCE - QUALIFICATION OF MAINTENANCE PERSONNEL |
ISO 18604:2013 | Packaging and the environment — Material recycling |
CEI EN 61249-4-1 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-1: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
CEI EN 61249-2-38 : 2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-38: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
CEI EN 61249-2-6 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-6: REINFORCED BASE MATERIALS, CLAD AND UNCLAD BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
NSF 416 : 2015 | SUSTAINABILITY ASSESSMENT FOR WATER TREATMENT CHEMICAL PRODUCTS |
BS ISO 24512:2007 | Activities relating to drinking water and wastewater services. Guidelines for the management of drinking water utilities and for the assessment of drinking water services |
BS ISO 22004:2014 | Food safety management systems. Guidance on the application of ISO 22000 |
ISO 19011:2011 | Guidelines for auditing management systems |
UNI CEI CEN/TS 45545-6 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS |
BS ISO 14025 : 2006 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES |
BS ISO 28004 : 2007 | SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - GUIDELINES FOR THE IMPLEMENTATION OF ISO 28000 |
NSF 457 : 2017 | SUSTAINABILITY LEADERSHIP STANDARD FOR PHOTOVOLTAIC MODULES |
I.S. EN 61249-2-4:2002 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-4: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYESTER NON-WOVEN/WOVEN FIBREGLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
BS EN 16747:2015 | Maritime and port security services |
16/30282355 DC : 0 | BS ISO 35103 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OPERATIONS - ENVIRONMENTAL MONITORING |
BS PD ISO/IEC TS 17021-2 : 2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS |
04/30123452 DC : DRAFT OCT 2004 | IEC 61249-2-22 ED 1 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-22: REINFORCED BASE MATERIALS CLAD AND UNCLAD - MODIFIED NONHALOGENATED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
I.S. EN ISO 15589-2:2014 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES (ISO 15589-2:2012) |
UNE-CWA 16393:2014 | Laboratory biorisk management - Guidelines for the implementation of CWA 15793:2008 |
PD IEC/TR 62837:2013 | Energy efficiency through automation systems |
ISO 24510:2007 | Activities relating to drinking water and wastewater services — Guidelines for the assessment and for the improvement of the service to users |
14/30254349 DC : 0 | BS ISO 50004 - ENERGY MANAGEMENT SYSTEMS - GUIDANCE FOR THE IMPLEMENTATION, MAINTENANCE AND IMPROVEMENT OF AN ENERGY MANAGEMENT SYSTEM |
AHAM 7001 : 2015 | SUSTAINABILITY STANDARD FOR HOUSEHOLD REFRIGERATION APPLIANCES |
07/30164957 DC : 0 | BS EN 61249-4-14 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-14: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
11/30239628 DC : 0 | BS ISO 18602 - PACKAGING AND THE ENVIRONMENT - OPTIMIZATION OF THE PACKAGING SYSTEM |
07/30156704 DC : DRAFT DEC 2007 | BS ISO GUIDE 64 - GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS |
BS ISO 10014:2006 | Quality management. Guidelines for realizing financial and economic benefits |
I.S. EN ISO 14050:2010 | ENVIRONMENTAL MANAGEMENT - VOCABULARY |
ISO/TR 14047:2012 | Environmental management Life cycle assessment Illustrative examples on how to apply ISO 14044 to impact assessment situations |
15/30329382 DC : 0 | BS EN 9120 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE DISTRIBUTORS |
11/30215718 DC : 0 | BS ISO 10987 - EARTH-MOVING MACHINERY - SUSTAINABILITY - TERMINOLOGY, SUSTAINABILITY FACTORS AND REPORTING |
08/30154948 DC : DRAFT FEB 2008 | BS ISO 21809-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 4: POLYETHYLENE COATINGS (2-LAYER PE) |
DD CEN/TS 15224:2005 | Health services. Quality management systems. Guide for the use of EN ISO 9001:2000 |
DIN EN 15530:2008-06 | Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards |
BS EN 16631:2015 | LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Reconditioning requirements |
14/30300118 DC : 0 | BS EN 14334 - LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS |
07/30164969 DC : 0 | EN 61249-4-17 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-17: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
IEC 61249-2-46:2018 | Materials for printed boards and other interconnecting structures - Part 2-46: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,5 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly |
DD CEN ISO/TS 17665-2:2009 | Sterilization of health care products. Moist heat Guidance on the application of ISO 17665-1 |
UNE-CEN/CLC ISO/IEC/TS 17021-2:2016 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 2: Competence requirements for auditing and certification of environmental management systems (ISO/IEC/TS 17021-2:2012) |
UNE-EN 16747:2016 | Maritime and port security services |
BS ISO 28002:2011 | Security management systems for the supply chain. Development of resilience in the supply chain. Requirements with guidance for use |
12/30259903 DC : 0 | BS ISO/IEC 15504-6 - INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 6: AN EXEMPLAR SYSTEM LIFE CYCLE PROCESS ASSESSMENT MODEL |
UNE-EN ISO 21809-2:2015 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014) |
10/30208983 DC : 0 | BS ISO 13053-2 - QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 2: TOOLS AND TECHNIQUES |
DIN EN ISO 15589-2:2014-07 | Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012) |
I.S. EN 61249-2-42:2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-42: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
I.S. EN 61249-2-27:2013 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-27: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BISMALEIMIDE/TRIAZINE MODIFIED WITH NON-HALOGENATED EPOXIDE WOVEN GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD (IEC 61249-2-27:2012 (EQV)) |
ASTM E 2365 : 2014 : REDLINE | Standard Guide for Environmental Compliance Performance Assessment |
N288.8-17 | Establishing and implementing action levels for releases to the environment from nuclear facilities |
BS ISO 30301:2011 | Information and documentation. Management systems for records. Requirements |
04/30048301 DC : DRAFT MAY 2004 | BS EN ISO 11137-1 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
PD ISO/TR 21932:2013 | Sustainability in buildings and civil engineering works. A review of terminology |
UNE-ISO 14055-1:2018 | Environmental management -- Guidelines for establishing good practices for combatting land degradation and desertification -- Part 1: Good practices framework |
UNE-EN 15221-4:2012 | Facility Management - Part 4: Taxonomy, Classification and Structures in Facility Management |
CSA Z17665-2 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
S.R. CEN ISO TS 17665-2:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
I.S. EN 61249-2-26:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-26: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
BIS IS/ISO 50001 : 2011(R2017) | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
IPC-1401 CHINESE : 2017 | SUPPLY CHAIN SOCIAL RESPONSIBILITY MANAGEMENT SYSTEM GUIDANCE |
ISO 13065:2015 | Sustainability criteria for bioenergy |
10/30217464 DC : 0 | BS ISO 28002 - SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - DEVELOPMENT OF RESILIENCY IN THE SUPPLY CHAIN - REQUIREMENTS WITH GUIDANCE FOR USE |
BS EN ISO 14004:2016 | ENISO 14004 Environmental management systems - General guidelines on principles, systems and support techniques |
07/30160564 DC : 0 | BS ISO/IEC 15288 - SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES |
07/30150249 DC : 0 | BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
BS ISO 14055-1:2017 | Environmental management. Guidelines for establishing good practices for combatting land degradation and desertification Good practices framework |
BS ISO 21931-1:2010 | Sustainability in building construction. Framework for methods of assessment of the environmental performance of construction works Buildings |
11/30240152 DC : 0 | BS ISO 18601 - PACKAGING AND THE ENVIRONMENT - GENERAL REQUIREMENTS FOR THE USE OF ISO STANDARDS IN THE FIELD OF PACKAGING AND THE ENVIRONMENT |
DIN EN 16747:2015-11 | Maritime and port security services |
14/30297213 DC : 0 | BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
BS ISO 14015 : 2001 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL ASSESSMENT OF SITES AND ORGANIZATIONS (EASO) |
BS ISO 37001:2016 | Anti-bribery management systems. Requirements with guidance for use |
PD ISO/TS 22003:2013 | Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems |
04/30079743 DC : DRAFT APR 2004 | ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000 WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
BS ISO 14050:2002 | Environmental management. Vocabulary |
R7004-17 | Sustainability standard for household cooking appliances (Binational standard with AHAM 7004-2017 and UL 7004) |
BS ISO 14004 : 2004 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON PRINCIPLES, SYSTEMS AND SUPPORTING TECHNIQUES |
17/30334569 DC : 0 | BS ISO 14080 - GREENHOUSE GAS MANAGEMENT AND RELATED ACTIVITIES - FRAMEWORK AND PRINCIPLES FOR METHODOLOGIES ON CLIMATE ACTIONS |
CEN/TR 17004:2016 | Mechanical products - Conditions to set up environmental communication models by recognizing sectorial particularities |
I.S. CEN TS 15224:2006 | HEALTH SERVICES - QUALITY MANAGEMENT SYSTEMS - GUIDE FOR THE USE OF EN ISO 9001:2000 |
ISO 17258:2015 | Statistical methods Six Sigma Basic criteria underlying benchmarking for Six Sigma in organisations |
I.S. EN ISO 15544:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - REQUIREMENTS AND GUIDELINES FOR EMERGENCY RESPONSE |
IPC 1401 : 2017 | SUPPLY CHAIN SOCIAL RESPONSIBILITY MANAGEMENT SYSTEM GUIDANCE |
AHAM 7004 : 2017 | SUSTAINABILITY STANDARD FOR HOUSEHOLD COOKING APPLIANCES |
PD ISO/TS 16949:2009 | Quality management systems. Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations |
BS EN ISO 19011:2011 | Guidelines for auditing management systems |
DD ISO/PAS 30003:2008 | Ships and marine technology. Ship recycling management systems. Requirements for bodies providing audit and certification of ship recycling management |
DD ISO/PAS 28001:2006 | Security management systems for the supply chain. Best practices for implementing supply chain security. Assessments and plans |
CSA ISO/IEC 15288 : 2009 | SYSTEMS AND SOFTWARE ENGINEERING - SYSTEM LIFE CYCLE PROCESSES |
BS ISO 28001:2007 | Security management systems for the supply chain. Best practices for implementing supply chain security, assessments and plans. Requirements and guidance |
CSA Z741 :2012 | GEOLOGICAL STORAGE OF CARBON DIOXIDE |
CAN/CSA-ISO 14025-07 (R2017) | Environmental Labels and Declarations - Type III Environmental Declarations - Principles and Procedures (Adopted ISO 14025:2006, first edition, 2006-07-01) |
CEI EN 62075 : 2013 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN |
I.S. EN 61249-2-6:2005/AC:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-6: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
CSA Z741 : 2012 : R2017 | GEOLOGICAL STORAGE OF CARBON DIOXIDE |
CSA ISO 9004 : 2009 : R2015 | MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
PREN 9134 : 200P1 | AEROSPACE SERIES - QUALITY SYSTEMS - SUPPLY CHAIN RISK MANAGEMENT GUIDELINE |
I.S. EN 61249-4-18:2013 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-18: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HIGH PERFORMANCE EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
ISO 50004:2014 | Energy management systems Guidance for the implementation, maintenance and improvement of an energy management system |
DIN EN ISO 9004:2009-12 | MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
I.S. EN 60076-1:2011 | POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011) |
BS ISO 55002:2014 | Asset management. Management systems. Guidelines for the application of ISO 55001 |
BS ISO 20140-1:2013 | Automation systems and integration. Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Overview and general principles |
CSA C22.2 No. 60601-1-10 : 2009 : INC : AMD 1 : 2014 : R201400 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
BS EN ISO 11135:2014 | Sterilization of health-care products. Ethylene oxide. Requirements for the development, validation and routine control of a sterilization process for medical devices |
I.S. EN ISO 14045:2012 | ENVIRONMENTAL MANAGEMENT - ECO-EFFICIENCY ASSESSMENT OF PRODUCT SYSTEMS - PRINCIPLES, REQUIREMENTS AND GUIDELINES (ISO 14045:2012) |
S.R. CEN/TR 17004:2016 | MECHANICAL PRODUCTS - CONDITIONS TO SET UP ENVIRONMENTAL COMMUNICATION MODELS BY RECOGNIZING SECTORIAL PARTICULARITIES |
AAMI ISO 11137-1 : 2006 : R2010 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
DIN EN ISO 50001:2011-12 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE (ISO 50001:2011) |
IEEE 1680.3-2012 | IEEE Standard for Environmental Assessment of Televisions |
I.S. ISO 45001:2018 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
UNE 179002:2018 | Health services. Quality management system for health care transport organization. |
IEEE/ISO/IEC 15288-2015 | ISO/IEC/IEEE International Standard - Systems and software engineering -- System life cycle processes |
S.R. CLC/TR 50600-99-1:2017 | INFORMATION TECHNOLOGY - DATA CENTRE FACILITIES AND INFRASTRUCTURES - PART 99-1: RECOMMENDED PRACTICES FOR ENERGY MANAGEMENT |
I.S. EN ISO 9004:2009 | QUALITY MANAGEMENT - QUALITY OF AN ORGANIZATION - GUIDANCE TO ACHIEVE SUSTAINED SUCCESS (ISO 9004:2018) |
IEEE 1680.2-2012 | IEEE Standard for Environmental Assessment of Imaging Equipment |
I.S. EN 61249-2-40:2013 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-40: REINFORCED BASE MATERIALS CLAD AND UNCLAD - HIGH PERFORMANCE, NONHALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY (IEC 61249-2-40:2012 (EQV)) |
ISO 9004:2018 | Quality management — Quality of an organization — Guidance to achieve sustained success |
I.S. EN ISO 14015:2010 | ENVIROMNETAL MANAGMENT - ENVIRONMENTL ASSESSMENT OF SITES AND ORGANIZATIONS (EASO) (ISO 14015:2001) |
ISO 30003:2009 | Ships and marine technology — Ship recycling management systems — Requirements for bodies providing audit and certification of ship recycling management |
I.S. EN ISO 14044:2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES (ISO 14044:2006) |
CEI EN 61249-2-36 : 2010 | MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-36: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES EN TISSU DE VERRE DE TYPE E EPOXYDE, PLAQUEES CUIVRE, D'INFLAMMABILITE DEFINIE (ESSAI DE COMBUSTION VERTICALE) POUR LES ASSEMBLAGES SANS PLOMB |
I.S. EN 61249-4-5:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-5: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - POLYIMIDE, MODIFIED OR UNMODIFIED, WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
ISO 15686-1:2011 | Buildings and constructed assets — Service life planning — Part 1: General principles and framework |
CEI EN 61249-4-18 : 2014 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-18: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HIGH PERFORMANCE EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
S.R. ISO/TS 9002:2016 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 9001:2015 |
CEI EN 61249-4-5 : 2006 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-5: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - POLYIMIDE, MODIFIED OR UNMODIFIED, WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
ISO 37001:2016 | Anti-bribery management systems — Requirements with guidance for use |
NF EN 61249-2-35 : 2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-35: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
EN ISO 14024:2018 | Environmental labels and declarations - Type I environmental labelling - Principles and procedures (ISO 14024:2018) |
AAMI TIR65 : 2015 | SUSTAINABILITY OF MEDICAL DEVICES - ELEMENTS OF A RESPONSIBLE PRODUCT LIFE CYCLE |
ISO 21067-2:2015 | Packaging Vocabulary Part 2: Packaging and the environment terms |
BS EN 60794-1-1:2016 | Optical fibre cables Generic specification. General |
S.R. CWA 16393:2012 | LABORATORY BIORISK MANAGEMENT - GUIDELINES FOR THE IMPLEMENTATION OF CWA 15793:2008 |
ISO/TS 17582:2014 | Quality management systems Particular requirements for the application of ISO 9001:2008 for electoral organizations at all levels of government |
NSF 140 : 2015 | SUSTAINABILITY ASSESSMENT FOR CARPET |
BS EN ISO 50001:2011 | Energy management systems. Requirements with guidance for use |
ISO 50007:2017 | Energy services Guidelines for the assessment and improvement of the energy service to users |
ISO 30301:2011 | Information and documentation Management systems for records Requirements |
I.S. CEN TS 15174:2006 | GAS SUPPLY SYSTEMS - GUIDELINE FOR SAFETY MANAGEMENT SYSTEMS FOR NATURAL GAS TRANSMISSION PIPELINES |
S.R. CEN ISO TS 29001:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS |
UNE-EN ISO 19011:2012 | Guidelines for auditing management systems (ISO 19011:2011) |
ISO/PAS 28002:2010 | Security management systems for the supply chain - Development of resilience in the supply chain - Requirements with guidance for use |
S.R. CWA 16768:2014 | FRAMEWORK FOR SUSTAINABLE VALUE CREATION IN MANUFACTURING NETWORK |
ISO 20400:2017 | Sustainable procurement — Guidance |
I.S. EN 50581:2012 | TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES |
UNI ISO 26000 : 2010 | GUIDANCE ON SOCIAL RESPONSIBILITY |
CSA ISO/IEC TS 24748-1 : 2018 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE MANAGEMENT - PART 1: GUIDELINES FOR LIFE CYCLE MANAGEMENT |
ISO/TR 14032:1999 | Environmental management Examples of environmental performance evaluation (EPE) |
I.S. 393:2005 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
ASTM E 3096 : 2017 | Standard Guide for Definition, Selection, and Organization of Key Performance Indicators for Environmental Aspects of Manufacturing Processes |
CEI EN 61249-2-8 : 2004 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-8: REINFORCED BASE MATERIALS CLAD AND UNCLAD MODIFIED BROMINATED EPOXIDE WOVEN FIBERGLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
CSA PLUS 1109 : 2003 | ENVIRONMENTAL TERMINOLOGY FOR CANADIAN BUSINESS |
UNI EN ISO 14025 : 2010 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES |
TR 102 531 : 1.1.1 | ENVIRONMENTAL ENGINEERING (EE); BETTER DETERMINATION OF EQUIPMENT ENERGY CONSUMPTION FOR IMPROVED SIZING OF POWER PLANT |
UNI EN 16214-1 : 2012 | SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 1: TERMINOLOGY |
UNE-ISO 22006:2013 | Quality management systems -- Guidelines for the application of ISO 9001:2008 to crop production. |
ISO 17422:2002 | Plastics Environmental aspects General guidelines for their inclusion in standards |
ISO/IEC 17011:2017 | Conformity assessment — Requirements for accreditation bodies accrediting conformity assessment bodies |
ISO 24521:2016 | Activities relating to drinking water and wastewater services — Guidelines for the management of basic on-site domestic wastewater services |
ISO/IEC TR 15504-6:2008 | Information technology Process assessment Part 6: An exemplar system life cycle process assessment model |
EN ISO 9004:2018 | Quality management - Quality of an organization - Guidance to achieve sustained success (ISO 9004:2018) |
DIN EN ISO 14044:2006-10 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES (ISO 14044:2006) |
ISO/PAS 28001:2006 | Security management systems for the supply chain Best practices for implementing supply chain security Assessments and plans |
ISO 10987:2012 | Earth-moving machinery — Sustainability — Terminology, sustainability factors and reporting |
I.S. EN 61249-2-18:2002 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-18: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYESTER NON-WOVEN FIBREGLASS REINFORCED LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
I.S. EN 61249-4-2:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-2: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
ISO/TR 21932:2013 | Sustainability in buildings and civil engineering works A review of terminology |
ISO 22004:2014 | Food safety management systems Guidance on the application of ISO 22000 |
ISO 11135:2014 | Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices |
I.S. EN 61249-2-21:2004 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-21: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
IEC TR 62125:2007 | Environmental statement specific to IEC TC 20 - Electric cables |
ISO/TS 22003:2013 | Food safety management systems Requirements for bodies providing audit and certification of food safety management systems |
ISO/IEC 24700:2005 | Quality and performance of office equipment that contains reused components |
I.S. EN ISO/IEC 17021:2011 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS |
I.S. EN 61249-2-11:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-11: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYIMIDE, BROMINATED EPOXIDE MODIFIED OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
I.S. EN ISO 15378:2017 | PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2015, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) (ISO 15378:2017) |
DIN EN ISO 9001:2015-11 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015) |
EN ISO 14006:2011 | Environmental management systems - Guidelines for incorporating ecodesign (ISO 14006:2011) |
IEEE 1680.1-2009 | IEEE Standard for Environmental Assessment of Personal Computer Products, Including Notebook Personal Computers, Desktop Personal Computers, and Personal Computer Displays |
CEN/TS 45545-1:2009 | Railway applications - Fire protection on railway vehicles - Part 1: General |
DIN EN ISO 11137-1:2015-11 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
BS EN ISO 9001:2015 | Quality management systems. Requirements |
BS EN ISO 9000:2015 | Quality management systems. Fundamentals and vocabulary |
BS EN ISO 11135-1:2007 | Sterilization of health care products. Ethylene oxide Requirements for development, validation and routine control of a sterilization process for medical devices |
ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
ISO 15589-2:2012 | Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines |
ISO 14051:2011 | Environmental management — Material flow cost accounting — General framework |
BS EN 14334:2014 | LPG equipment and accessories. Inspection and testing of LPG road tankers |
BS EN ISO 14224:2016 | Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
BS EN ISO 10012:2003 | Measurement management systems. Requirements for measurement processes and measuring equipment |
IEC 61249-2-7:2002 | Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad |
ISO 14005:2010 | Environmental management systems Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation |
IEC 61249-2-43:2016 | Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
IEC 61249-2-2:2005 | Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad |
ISO/TS 17665-2:2009 | Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 |
EN 61249-2-7:2002/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
EN 61249-2-4:2002 | Materials for printed boards and other interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad |
EN 61249-2-21:2003 | Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
EN 12583:2014 | Gas Infrastructure - Compressor stations - Functional requirements |
EN 50581:2012 | Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances |
CEN/TS 16822 : 2015 | TEXTILES AND TEXTILE PRODUCTS - SELF-DECLARED ENVIRONMENTAL CLAIMS - USE OF THE TERMS |
EN 62075:2012/AC:2013 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012) |
EN 61249-2-6:2003/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-6: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
CEN ISO/TS 29001:2011 | Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations (ISO/TS 29001:2010) |
EN 61249-2-22:2005 | Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
EN 61249-4-18 : 2013 | Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
EN 61249-2-23:2005 | Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad |
EN 61249-2-8:2003 | Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
ONORM EN 14654-1 : 2014 | MANAGEMENT AND CONTROL OF OPERATIONAL ACTIVITIES IN DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 1: CLEANING |
EN 61249-2-41:2010 | Materials for printed boards and other interconnecting structures - Part 2-41: Reinforced base materials clad and unclad - Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
EN 61249-2-38:2009 | Materials for printed boards and other interconnecting structures - Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
CLC/TR 62125:2008 | Environmental statement specific to TC 20 - Electric cables |
EN 50598-3:2015 | Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations |
CEN/TS 45545-2:2009 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
EN 61249-2-42 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-42: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
DIN EN 14969:2006-11 | RAILWAY APPLICATIONS - TRACK - QUALIFICATION SYSTEM FOR RAILWAY TRACKWORK CONTRACTORS |
EN 61249-4-1:2008 | Materials for printed boards and other interconnecting structures - Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability |
DIN EN ISO 14937:2010-03 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
EN 61249-2-35:2009 | Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
EN 61249-2-11:2003/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-11: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYIMIDE, BROMINATED EPOXIDE MODIFIED OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
EN 61249-2-30:2013 | Materials for printed boards and other interconnecting structures - Part 2-30: Reinforced base materials clad and unclad - Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad |
DIN EN 14717:2005-07 | Welding and allied processes - Environmental check list |
EN ISO 13702:1999 | Petroleum and natural gas industries - Control and migration of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999) |
DIN EN 16001:2009-08 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
EN 61249-2-36:2009 | Materials for printed boards and other interconnecting structures - Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
EN 60076-1:2011 | POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011) |
EN 61249-2-9:2003 | Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials, clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
EN 61249-2-40:2013 | Materials for printed boards and other interconnecting structures - Part 2-40: Reinforced base materials clad and unclad - High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
EN 61249-2-5:2003/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-5: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BROMINATED EPOXIDE CELLULOSE PAPER REINFORCED CORE / WOVEN E-GLASS REINFORCED SURFACES LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
EN 61249-2-10:2003/corrigendum:2005 | Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials, clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
EN 61249-2-19:2002 | Materials for printed boards and other interconnecting structures - Part 2-19: Reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad |
EN 61249-2-2:2005 | Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad |
CEN/TR 16469:2013 | Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements |
CEN ISO/TS 17665-2:2009 | Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009) |
EN 61249-2-39:2013 | Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
CSA ISO 9000 : 2016 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY |
AHAM 7008 : 2018 | SUSTAINABILITY STANDARD FOR HOUSEHOLD DEHUMIDIFIER APPLIANCES |
AHAM 7005 : 2017 | SUSTAINABILITY STANDARD FOR HOUSEHOLD CLOTHES DRYING APPLIANCES |
CSA ISO 10012 : 2003 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
CSA ISO/IEC 27003 : 2010 : R2015 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEM IMPLEMENTATION GUIDANCE |
CSA ISO 20121 : 2013 | EVENT SUSTAINABILITY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
INCITS/ISO/IEC 29142-3:2013(R2023) | Information Technology - Print Cartridge Characterization - Part 3: Environment |
UNE-EN 16125:2020 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
I.S. EN 14717:2005 | WELDING AND ALLIED PROCESSES - ENVIRONMENTAL CHECK LIST |
AHAM 7003 : 2016 | SUSTAINABILITY STANDARD FOR HOUSEHOLD CLOTHES WASHERS |
CSA ISO/IEC 27003 : 2010 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEM IMPLEMENTATION GUIDANCE |
OVE/ONORM EN 60794-1-1 : 2012 | OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL (IEC 60794-1-1:2011) |
CSA ISO 10012 : 2003 : R2013 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
ISO 19011:2011 | Guidelines for auditing management systems |
ISO 14006:2011 | Environmental management systems Guidelines for incorporating ecodesign |
ISO 14063:2006 | Environmental management Environmental communication Guidelines and examples |
AS ISO 37101:2020 | Sustainable development in communities - Management system for sustainable development - Requirements with guidance for use |
AS ISO 10987.2:2021 | Earth-moving machinery - Sustainability Remanufacturing |
ISO 31000:2009 | Risk management Principles and guidelines |
AS ISO 37001:2019 | Anti-bribery management systems - Requirements with guidance for use |
AS ISO 22301:2020 | Security and resilience - Business continuity management systems - Requirements |
ISO 50001:2011 | Energy management systems Requirements with guidance for use |
ISO 14031:2013 | Environmental management Environmental performance evaluation Guidelines |
AS ISO 55002:2019 | Asset management - Management systems - Guidelines for the application of ISO 55001 |
ISO 14044:2006 | Environmental management Life cycle assessment Requirements and guidelines |
ISO 14004:2016 | Environmental management systems General guidelines on implementation |
AS ISO 27914:2019 | Carbon dioxide capture, transportation and geological storage - Geological storage |
AS ISO 37100:2020 | Sustainable cities and communities - Vocabulary |
SA HB 13485:2020 | AS ISO 13485:2017 - Medical devices - A practical guide |
ISO Guide 73:2009 | Risk management — Vocabulary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.