ISO 23550:2011
Withdrawn
Withdrawn
View Superseded by
Safety and control devices for gas burners and gas-burning appliances — General requirements
Amended by
Available format(s)
Hardcopy , PDF
Published date
03-10-2011
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO 23550:2011 specifies safety, constructional and performance requirements and testing of safety control or regulating devices and sub-assemblies or fittings for burners and gas-burning appliances using such fuel gases as natural gas, manufactured gas or liquefied petroleum gas (LPG). It is not applicable to corrosive and waste gases.
ISO 23550:2011 is applicable to the following controls: automatic shut-off valves; burner controls; flame supervision devices; gas/air ratio controls; pressure regulators; manual taps; mechanical thermostats; multifunctional controls; pressure-sensing devices; valve-proving systems; zero regulators.
The test methods given in ISO 23550:2011 are intended for product type testing. Tests intended for production testing are not specifically included.
| Committee |
ISO/TC 161
|
| DevelopmentNote |
Supersedes ISO/FDIS 23550. (04/2018)
|
| DocumentType |
Standard
|
| Pages |
42
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN ISO 23550 : 2018 | Identical |
| BS ISO 13574:2015 | Industrial furnaces and associated processing equipment. Vocabulary |
| BS EN 62282-3-100:2012 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| ISO 23551-8:2016 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 8: Multifunctional controls |
| DIN EN ISO 23553-1:2014-09 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014 |
| EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| BS ISO 22968:2010 | Forced draught oil burners |
| BS ISO 23551-6:2014 | Safety and control devices for gas burners and gas-burning appliances. Particular requirements Thermoelectric flame supervision controls |
| 12/30249472 DC : 0 | BS ISO 13574 - INDUSTRIAL FURNACES AND ASSOCIATED THERMAL PROCESSING EQUIPMENT - VOCABULARY |
| 15/30313338 DC : 0 | BS ISO 23551-8 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 8: MULTIFUNCTIONAL CONTROLS |
| BS ISO 23551-10:2016 | Safety and control devices for gas burners and gas-burning appliances. Particular requirements Vent valves |
| ISO 23551-1:2012 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 1: Automatic and semi-automatic valves |
| ISO 19867-1:2018 | Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability |
| BS ISO 23551-8:2016+A1:2019 | Safety and control devices for gas burners and gas-burning appliances. Particular requirements Multifunctional controls |
| BS ISO 23551-8:2016 | Safety and control devices for gas burners and gas-burning appliances. Particular requirements Multifunctional controls |
| ISO 23552-1:2007 | Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type |
| EN 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| 13/30231511 DC : 0 | BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS |
| I.S. EN 62282-2:2012 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV)) |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| CEI EN 62282-2 : 2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| 14/30303563 DC : 0 | BS ISO 23551-9 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 9: MECHANICAL GAS THERMOSTATS |
| 17/30335786 DC : 0 | BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY |
| ISO 23551-6:2014 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 6: Thermoelectric flame supervision controls |
| 16/30354071 DC : 0 | BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| 13/30260415 DC : 0 | BS ISO 23551-5 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 5: MANUAL GAS VALVES |
| CEI EN 62282-3-100 : 2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| 15/30329968 DC : 0 | BS ISO 23551-10 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES PARTICULAR REQUIREMENTS - PART 10: VENT VALVES |
| BS ISO 23551-9:2015 | Safety and control devices for gas burners and gas-burning appliances. Particular requirements Mechanical gas thermostats |
| ISO 22968:2010 | Forced draught oil burners |
| ISO 23551-10:2016 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 10: Vent valves |
| ISO 23551-5:2014 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 5: Manual gas valves |
| 10/30215301 DC : 0 | ISO 23551-1 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES |
| OVE/ONORM EN 62282-3-100 : 2013 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012) |
| 13/30266431 DC : 0 | BS ISO 23551-6 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES PARTICULAR REQUIREMENTS - PART 6: THERMOELECTRIC FLAME SUPERVISION DEVICES |
| ISO 23551-9:2015 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 9: Mechanical gas thermostats |
| I.S. EN ISO 23553-1:2014 | SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014) |
| I.S. EN 62282-3-100:2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV)) |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| ISO 23551-4:2005 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 4: Valve-proving systems for automatic shut-off valves |
| ISO 13577-4:2014 | Industrial furnace and associated processing equipment — Safety — Part 4: Protective systems |
| ISO 13574:2015 | Industrial furnaces and associated processing equipment — Vocabulary |
| IEC 60730-2-6:2015 | Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| BS EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves |
| EN 60730-2-6:2016 | Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances — Particular requirements — Part 1: Automatic and semi-automatic valves |
| 12/30250105 DC : 0 | BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012) |
| IEC 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| IEC 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| BS EN 62282-2:2012 | Fuel cell technologies Fuel cell modules |
| BS ISO 13577-2:2014 | Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems |
| EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
| BS ISO 23551-5:2014 | Safety and control devices for gas burners and gas-burning appliances Manual gas valves |
| BS ISO 13577-4:2014 | Industrial furnace and associated processing equipment. Safety Protective systems |
| BS EN 60730-2-6:2016 | Automatic electrical controls Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| ISO 23551-3:2005 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 3: Gas/air ratio controls, pneumatic type |
| ISO 23551-2:2006 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 2: Pressure regulators |
| ISO 13577-2:2014 | Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
| I.S. EN 60730-2-6:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 2-6: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL PRESSURE SENSING CONTROLS INCLUDING MECHANICAL REQUIREMENTS |
| CEI EN 60730-2-6 : 2019 | Automatic electrical controls Part 2: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| UNE-EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| UNE-EN 60730-2-6:2016 | Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| UNE-EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
| ISO 8655-1:2002 | Piston-operated volumetric apparatus — Part 1: Terminology, general requirements and user recommendations |
| ISO 7005-2:1988 | Metallic flanges — Part 2: Cast iron flanges |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| IEC 61000-4-8:2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| ISO 6708:1995 | Pipework components — Definition and selection of DN (nominal size) |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| ASME B16.1 : 2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing |
| ISO 1400:1975 | Vulcanized rubbers of high hardness (85 to 100 IRHD) — Determination of hardness |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| SAE J514_201201 | Hydraulic Tube Fittings |
| IEC 61643-11:2011 | Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods |
| ISO 65:1981 | Carbon steel tubes suitable for screwing in accordance with ISO 7-1 |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 301:2006 | Zinc alloy ingots intended for castings |
| SAE J512_199704 | AUTOMOTIVE TUBE FITTINGS |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic — Determination of the effect of liquids |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.