ISO 2768-2:1989
Withdrawn
Withdrawn
View Superseded by
GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-1989
Withdrawn date
02-08-2021
Superseded by
US$96.00
Excluding Tax where applicable
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN ISO 2768-2:1991-04 | Identical |
| PN EN 22768-2 : 1999 | Identical |
| EN 22768-2:1993 | Identical |
| NEN ISO 2768-2 : 1990 C2 1994 | Identical |
| NS ISO 2768-2 : 1ED 1993 | Identical |
| UNE-EN 22768-2:1994 | Identical |
| JIS B 0419:1991 | Identical |
| NF EN 22768-2 : 1993 | Identical |
| ONORM EN 22768-2 : 1993 | Identical |
| I.S. EN 22768-2:1994 | Identical |
| I.S. EN 4710-03:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 03: SPRING CLAMP |
| I.S. EN 14420-4:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| I.S. EN 14420-7:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| I.S. EN 14420-8:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| I.S. EN ISO 3964:2016 | DENTISTRY - COUPLING DIMENSIONS FOR HANDPIECE CONNECTORS (ISO 3964:2016) |
| ISO 2768-1:1989 | General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications |
| DIN ISO 2768-1:1991-06 | GENERAL TOLERANCES - TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
| I.S. EN 60987:2015 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - HARDWARE DESIGN REQUIREMENTS FOR COMPUTER-BASED SYSTEMS |
| DIN EN 15340:2007-06 | Thermal spraying - Determination of shear load resistance of thermally sprayed coatings |
| ISO 3937-2:2008 | Cutter arbors with tenon drive — Part 2: Dimensions of 7/24 taper |
| ISO 17447-2:2015 | Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs |
| ISO 10889-3:2016 | Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat |
| DIN EN ISO 8362-7:2011-03 | Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006) |
| ISO 8132:2014 | Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series |
| ISO 26623-2:2014 | Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers |
| ISO 10889-5:2016 | Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat |
| DIN ISO 7388-3:2015-03 | Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF (ISO 7388-3:2013) |
| ISO 3860:2011 | Bore cutters with key drive — Form milling cutters with constant profile |
| ISO 6550-4:2014 | Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 4: M8 x 1 glow-plugs |
| DIN ISO 10889-2:2006-01 | TOOL HOLDERS WITH CYLINDRICAL SHANK - PART 2: TYPE A, SHANKS FOR TOOL HOLDERS OF SPECIAL DESIGNS |
| ISO 7206-12:2016 | Implants for surgery — Partial and total hip joint prostheses — Part 12: Deformation test method for acetabular shells |
| ISO 9270-2:2010 | 7/24 taper spindle noses for automatic tool changers — Part 2: Dimensions and designation of spindle noses of forms J and JF |
| BS EN 4710-03:2015 | Aerospace series. Quick release fastening systems for non-structural applications Spring clamp |
| DIN EN ISO 8536-3:2009-09 | Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles (ISO 8536-3:2009) |
| DIN ISO 10889-3:2006-01 | TOOL HOLDERS WITH CYLINDRICAL SHANK - PART 3: TYPE B WITH RECTANGULAR RADIAL SEAT |
| DIN ISO 7388-1:2014-07 | TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS OF FORMS A, AD, AF, U, UD AND UF (ISO 7388-1:2007) |
| ISO 10889-4:2016 | Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat |
| DIN EN 14420-8:2016-06 | HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| ISO 10649-6:2012 | Cutter arbors with parallel key and tenon drive — Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system |
| BS ISO 17447-1:2015 | Road Vehicles. Glow-plugs with conical seating and their cylinder head housing Basic characteristics and dimensions for metal-sheath-type glow-plugs |
| DIN EN 14420-4:2013-09 | Hose fittings with clamp units - Part 4: Flange connections |
| DIN 28115:2003-02 | PN 10 to PN 40 carbon steel nozzles for vesels in process engineering applications |
| DIN EN 14420-5:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| BS EN ISO 3964:2016 | Dentistry. Coupling dimensions for handpiece connectors |
| BS ISO 5145:2017 | Gas cylinders. Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning |
| BS EN 50180-3 : 2015 | BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 3: REQUIREMENTS FOR BUSHING FIXATIONS |
| BS EN 14420-8 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM) |
| EN 13261:2009+A1:2010 | Railway applications - Wheelsets and bogies - Axles - Product requirements |
| EN 12881-1:2014 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
| BS EN ISO 8936:2017 | Awnings for leisure accommodation vehicles. Requirements and test methods |
| DIN ISO 26622-2:2013-10 | MODULAR TAPER INTERFACE WITH BALL TRACK SYSTEM - PART 2: DIMENSIONS AND DESIGNATION OF RECEIVERS (ISO 26622-2:2008) |
| DIN ISO 10889-6:2006-01 | TOOL HOLDERS WITH CYLINDRICAL SHANK - PART 6: TYPE E WITH CYLINDRICAL SEAT |
| BS EN 16313:2013 | Connections for heating and cooling appliances. Detachable connection with outside threaded pipe G ¾ A and inside cone |
| BS EN 50216-12:2011 | Power transformer and reactor fittings Fans |
| BS EN 14420-3:2013 | Hose fittings with clamp units Clamp units, bolted or pinned |
| PREN 3624 : 200P1 | AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION |
| BS EN 14420-5:2013 | Hose fittings with clamp units Threaded connections |
| PREN 3101 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - SEALANTS - TEST METHOD - DETERMINATION OF RESISTANCE TO THERMAL RUPTURE |
| BS EN 14420-6:2013 | Hose fittings with clamp units TW tank truck couplings |
| BS ISO 10649-1:2013 | Cutter arbors with parallel key and tenon drive General dimensions |
| BS ISO 10649-3:2013 | Cutter arbors with parallel key and tenon drive Dimensions and designation of tool holders with 7/24 taper for automatic tool changer |
| BS ISO 10649-2:2013 | Cutter arbors with parallel key and tenon drive Dimensions and designation of tool holders with taper interface with flange contact surface |
| PREN 2824 : 200P1 | AEROSPACE SERIES - BURNING BEHAVIOUR OF NON METALLIC MATERIALS UNDER THE INFLUENCE OF RADIATING HEAT AND FLAMES - DETERMINATION OF SMOKE DENSITY AND GAS COMPONENTS IN THE SMOKE OF MATERIALS - TEST EQUIPMENT, APPARATUS AND MEDIA |
| I.S. EN 14420-3:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| ISO 5459:2011 | Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
| EN 60987:2015 | Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems |
| I.S. EN 4694:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE D, E AND F |
| NF ISO 128-1 : 2003 | TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 1: INTRODUCTION AND INDEX |
| ISO 17447-1:2015 | Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs |
| ISO 11687-1:1995 | Plain bearings — Pedestal plain bearings — Part 1: Pillow blocks |
| ISO 10889-7:2016 | Tool holders with cylindrical shank — Part 7: Type F with taper seat |
| DIN EN 16313:2013-08 | Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G 3/4 A and inside cone |
| ISO 5145:2017 | Gas cylinders — Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning |
| ISO 128-1:2003 | Technical drawings — General principles of presentation — Part 1: Introduction and index |
| ISO 10889-2:2016 | Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs |
| ISO 26623-1:2014 | Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks |
| DIN EN 13261:2011-01 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| ISO/TR 18569:2004 | Safety of machinery — Guidelines for the understanding and use of safety of machinery standards |
| DIN EN 14420-6:2013-09 | Hose fittings with clamp units - Part 6: TW tank truck couplings |
| ISO 10889-6:2016 | Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat |
| ISO 7388-3:2016 | Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF |
| ISO 7388-2:2007 | Tool shanks with 7/24 taper for automatic tool changers — Part 2: Dimensions and designation of shanks of forms J, JD and JF |
| ISO 8362-7:2006 | Injection containers and accessories — Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part |
| ISO 7388-1:2007 | Tool shanks with 7/24 taper for automatic tool changers — Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF |
| ISO 10649-1:2013 | Cutter arbors with parallel key and tenon drive — Part 1: General dimensions |
| ISO 8133:2014 | Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series |
| DIN EN 12881-1:2015-10 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
| ISO 10649-3:2013 | Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer |
| ISO 1641-2:2011 | End mills and slot drills — Part 2: Dimensions and designation of milling cutters with Morse taper shanks |
| ISO 8936:2017 | Awnings for leisure accommodation vehicles — Requirements and test methods |
| ISO 11687-2:1995 | Plain bearings — Pedestal plain bearings — Part 2: Side flange bearings |
| ISO 10649-2:2013 | Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface |
| ISO/TR 17209:2013 | Hydraulic fluid power — Two-, three- and four-port screw-in cartridge valves — Cavities with ISO 725 (UN and UNF) threads |
| ISO 8362-6:2010 | Injection containers and accessories — Part 6: Caps made of aluminium-plastics combinations for injection vials |
| ISO 9270-1:2010 | 7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF |
| ISO 3937-1:2008 | Cutter arbors with tenon drive — Part 1: Dimensions of Morse taper |
| ISO 10649-4:2013 | Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer |
| ISO 10643:2009 | Dimensions of accessories for cutter arbors with parallel key and tenon drive |
| BIS IS/ISO 7388-1 : 2007 | TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS OF FORMS A, AD, AF, U, UD AND UF |
| BS ISO 1641-3:2003 | End mills and slot drills Milling cutters with 7/24 taper shanks |
| VDI 3357:2014-01 | Sliding elements in large stamping dies |
| BS ISO 7206-12:2016 | Implants for surgery. Partial and total hip joint prostheses Deformation test method for acetabular shells |
| BS ISO 16839:2013 | Steel wire ropes. Determination of the transverse rigidity of steel wire ropes under no axial load condition |
| BS ISO 26623-2:2014 | Polygonal taper interface with flange contact surface Dimensions and designation of receivers |
| BS ISO 7388-2:2007 | Tool shanks with 7/24 taper for automatic tool changers Dimensions and designation of shanks of forms J, JD and JF |
| BS EN 14423:2013+A2:2019 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| VDI 3374:2004-01 | Punches with cylindrical head with and without ejector, punchholder, retainer, backing plates, polyurethanstripper and retainer for polyurethanstripper-system in large dies |
| NF EN ISO 8536-3 : 2009 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 3: ALUMINIUM CAPS FOR INFUSION BOTTLES |
| VDI/NCG 5210 Blatt 3:2012-12 (Draft) | Test guideline and test workpiece for the water jet cutting technology - Water jet cutting - Test workpiece for micro water jet cutting |
| VDI/NCG 5210 Blatt 2:2012-09 (Draft) | Test guideline and test workpiece for the water jet cutting technology - Water jet cutting - Test workpiece for 3D processing |
| BS EN 4702-05:2017 | Aerospace series. Quick release fastening systems for non-structural and lining applications Retaining washer |
| BIS IS/ISO 7388-3 : 2007 | TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 3: RETENTION KNOBS FOR SHANKS OF FORMS AC, AD, AF, UC, UD, UF, JD AND JF |
| BS EN 4710-07:2015 | Aerospace series. Quick release fastening systems for non-structural applications Retaining grommet |
| BIS IS 3406-2 : 2014 | DIMENSIONS FOR COUNTERSINKS AND COUNTERBORES - PART 2: COUNTERBORES |
| BS EN 4710-05:2015 | Aerospace series. Quick release fastening systems for non-structural applications Spring clamp. Two ways tolerance compensation |
| PD ISO/TR 17209:2013 | Hydraulic fluid power. Two-, three-and four-port screw-in cartridge valves. Cavities with ISO 725 (UN and UNF) threads |
| BS ISO 10643:2009 | Dimensions of accessories for cutting tools and their attachments |
| BS EN 4702-04:2017 | Aerospace series. Quick release fastening systems for non-structural and lining applications Spring clamp |
| BS EN 12881-1:2014 | Conveyor belts. Fire simulation flammability testing Propane burner tests |
| BS ISO 26622-2:2008 | Modular taper interface with ball track system Dimensions and designation of receivers |
| BS EN 4692:2017 | Aerospace series. Tie Rod with integrated bolts. Locking clip |
| BS EN 2824:2011 | Aerospace series. Burning behaviour of non-metallic materials under the influence of radiating heat and flames. Determination of smoke density and gas components in the smoke of materials. Test equipment apparatus and media |
| BS EN 4694:2017 | Aerospace series. Tie rod with integrated bolts. Assembly code D, E and F |
| BS ISO 10649-6:2012 | Cutter arbors with parallel key and tenon drive Dimensions and designation of tool holders with modular taper interface with ball track system |
| BS EN 4710-06:2015 | Aerospace series. Quick release fastening systems for non-structural applications Stud. Quick-release and locking |
| BS EN 4695:2017 | Aerospace series. Tie Rod with integrated bolts. Assembly Code G, H and K |
| VDI 4709:2015-08 | Central vacuum cleaning systems - Design, testing and application in facility management |
| BS ISO 3937-1:2008 | Cutter arbors with tenon drive Dimensions of Morse taper |
| BS ISO 6550-4:2014 | Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing M8 x 1 glow-plugs |
| BS EN 4693:2017 | Aerospace series. Tie rod with integrated bolts. Assembly code A, B and C |
| BS EN 15340:2007 | Thermal spraying. Determination of shear load resistance of thermally sprayed coatings |
| BS ISO 10649-4:2013 | Cutter arbors with parallel key and tenon drive Dimensions and designation of tool holders with 7/24 taper without automatic tool changer |
| BIS IS/ISO 7388-2 : 2007 | TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 2: DIMENSIONS AND DESIGNATION OF SHANKS OF FORMS J, JD AND JF |
| BS ISO 17447-2:2015 | Road Vehicles. Glow-plugs with conical seating and their cylinder head housing Basic characteristics and dimensions for ceramic-sheath-type glow-plugs |
| BS EN 4702-03:2017 | Aerospace series. Quick release fastening systems for non-structural and lining applications Stud - quick-release and locking |
| VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
| BS ISO 3937-2:2008 | Cutter arbors with tenon drive Dimensions of 7/24 taper |
| BS EN 4710-04:2015 | Aerospace series. Quick release fastening systems for non-structural applications Spring clamp. One way tolerance compensation |
| BS ISO 10649-5:2012 | Cutter arbors with parallel key and tenon drive Dimensions and designation of tool holders with polygonal taper interface with flange contact surface |
| BS EN ISO 8362-6:2011 | Injection containers and accessories Caps made of aluminium-plastics combinations for injection vials |
| BS ISO 8536-7:2009 | Infusion equipment for medical use Caps made of aluminium-plastics combinations for infusion bottles |
| I.S. EN 14420-6:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS |
| BS EN 60987:2015 | Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems |
| ISO 7789:2007 | Hydraulic fluid power — Two-, three- and four-port screw-in cartridge valves — Cavities |
| ISO 1641-3:2011 | End mills and slot drills — Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks |
| ISO 8536-7:2009 | Infusion equipment for medical use — Part 7: Caps made of aluminium-plastics combinations for infusion bottles |
| ISO 10649-5:2012 | Cutter arbors with parallel key and tenon drive — Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface |
| ISO 11687-3:1995 | Plain bearings — Pedestal plain bearings — Part 3: Centre flange bearings |
| DIN EN ISO 8362-6:2011-07 | Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials (ISO 8362-6:2010) |
| ISO 8536-3:2009 | Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles |
| EN 4710-07:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 07: Retaining grommet |
| EN 4702-05:2017 | Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer |
| BS ISO 10889-6:2016 | Tool holders with cylindrical shank Type E with cylindrical seat |
| BS ISO 10889-4:2016 | Tool holders with cylindrical shank Type C with rectangular axial seat |
| BS ISO 7388-3:2016 | Tool shanks with 7/24 taper for automatic tool changers Retention knobs of forms AD, AF, UD, UF, JD and JF |
| BS ISO 7388-1:2007 | Tool shanks with 7/24 taper for automatic tool changers Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF |
| BS ISO 10889-3:2016 | Tool holders with cylindrical shank Type B with rectangular radial seat |
| BS ISO 10889-7:2016 | Tool holders with cylindrical shank Type F with taper seat |
| DIN 7168:1991-04 | GENERAL TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS AND GENERAL GEOMETRICAL TOLERANCES |
| BS ISO 10889-2:2016 | Tool holders with cylindrical shank Type A, shanks for tool holders of special designs |
| BS EN 13261 : 2009 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| BS ISO 26622-1:2017 | Modular taper interface with ball track system Dimensions and designation of shanks |
| BS EN 14420-7:2013 | Hose fittings with clamp units Cam locking couplings |
| BS ISO 7789:2007 | Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities |
| BS ISO 10889-5:2016 | Tool holders with cylindrical shank Type D with more than one rectangular seat |
| PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
| OVE/ONORM EN 60987 : 2015 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - HARDWARE DESIGN REQUIREMENTS FOR COMPUTER-BASED SYSTEMS (IEC 60987:2007 + A1:2013) |
| EN 4692:2017 | Aerospace series - Tie Rod with integrated bolts -Locking clip |
| BS 7823-2:1995 | Pedestal plain bearings Specification for side flange bearings |
| BS EN ISO 8362-7:2010 | Injection containers and accessories Injection caps made of aluminium-plastics combinations without overlapping plastics part |
| BS 7823-1:1995 | Pedestal plain bearings Specification for pillow blocks |
| DIN ISO 12166:2006-02 | RESISTANCE WELDING EQUIPMENT - PARTICULAR SPECIFICATIONS APPLICABLE TO TRANSFORMERS WITH ONE SECONDARY WINDING FOR MULTISPOT WELDING, AS USED IN THE AUTOMOBILE INDUSTRY |
| 91/83289 DC : DRAFT DEC 1991 | PREN 3624 - AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION |
| I.S. EN 14420-5:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| I.S. EN ISO 8536-3:2009 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 3: ALUMINIUM CAPS FOR INFUSION BOTTLES |
| I.S. EN 1097-2:2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| I.S. EN 14423:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| ISO/ASTM 52901:2017 | Additive manufacturing — General principles — Requirements for purchased AM parts |
| DIN ISO 8536-7:2009-12 | Infusion equipment for medical use - Part 7: Caps made of aluminium-plastics combinations for infusion bottles (ISO 8536-7:2009) |
| ISO 27528:2009 | Wood-based panels — Determination of resistance to axial withdrawal of screws |
| DIN EN 1097-2:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| EN 15340:2007 | Thermal spraying - Determination of shear load resistance of thermally sprayed coatings |
| EN 4710-04:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 04: Spring clamp - One way tolerance compensation |
| EN 4710-05:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 05: Spring clamp - Two ways tolerance compensation |
| BS ISO 8132:2014 | Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series |
| BS ISO 8133:2014 | Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series |
| BS EN ISO 8536-3:2009 | Infusion equipment for medical use Aluminium caps for infusion bottles |
| EN ISO 5459:2011 | Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011) |
| EN 4693:2017 | Aerospace series - Tie rod with integrated bolts - Assembly code A, B and C |
| EN 22768-1:1993 | General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) |
| BS EN 14420-4:2013 | Hose fittings with clamp units Flange connections |
| BS ISO 1641-2:2011 | End mills and slot drills Dimensions and designation of milling cutters with Morse taper shanks |
| EN ISO 3964:2016 | Dentistry - Coupling dimensions for handpiece connectors (ISO 3964:2016) |
| EN ISO 14457:2017 | Dentistry - Handpieces and motors (ISO 14457:2017) |
| EN 4702-03:2017 | Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 03: Stud - quick-release and locking |
| EN 14423:2013+A1:2016 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| EN 2824:2011 | Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media |
| EN 4695:2017 | Aerospace series - Tie Rod with integrated bolts - Assembly Code G, H and K |
| EN 14420-4:2013 | Hose fittings with clamp units - Part 4: Flange connections |
| EN 14420-5:2013 | Hose fittings with clamp units - Part 5: Threaded connections |
| EN 14420-7:2013 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| EN 735:1995 | Overall dimensions of rotodynamic pumps - Tolerances |
| EN ISO 8536-3:2009 | Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles (ISO 8536-3:2009) |
| EN 16313:2013 | Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone |
| BS EN ISO 5459:2011 | Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems |
| EN ISO 8362-7:2010 | Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006) |
| EN 4710-03:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 03: Spring clamp |
| EN 4710-06:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 06: Stud - quick-release and locking |
| EN ISO 8936:2017 | Awnings for leisure accommodation vehicles - Requirements and test methods (ISO 8936:2017) |
| EN 4694:2017 | Aerospace series - Tie rod with integrated bolts - Assembly code D, E and F |
| BS ISO 3860:2011 | Bore cutters with key drive. Form milling cutters with constant profile |
| EN 4702-04:2017 | Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 04: Spring clamp |
| EN 14420-8:2013+A1:2016 | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
| EN ISO 8362-6:2011 | Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials (ISO 8362-6:2010) |
| EN 14420-6:2013 | Hose fittings with clamp units - Part 6: TW tank truck couplings |
| EN 14420-3:2013 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| I.S. EN ISO 14457:2017 | DENTISTRY - HANDPIECES AND MOTORS (ISO 14457:2017) |
| I.S. EN ISO 8936:2017 | AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017) |
| IS 2102 : Part 1 : 1993(R2014) | General tolerances Part 1 Tolerances for linear and angular dimensions without individual tolerance indications (Third Revision) |
| ISO 10303-214:2010 | Industrial automation systems and integration — Product data representation and exchange — Part 214: Application protocol: Core data for automotive mechanical design processes |
| ISO 3964:2016 | Dentistry — Coupling dimensions for handpiece connectors |
| ISO 16839:2013 | Steel wire ropes — Determination of the transverse rigidity of steel wire ropes under no axial load condition |
| DIN EN ISO 8936:2015-09 (Draft) | AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017) |
| IEC 60987:2007+AMD1:2013 CSV | Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems |
| DIN 83227:2002-08 | STAIRS ON SEAGOING SHIPS - STEPS |
| EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
| DIN EN ISO 3964:2017-03 | DENTISTRY - COUPLING DIMENSIONS FOR HANDPIECE CONNECTORS (ISO 3964:2016) |
| DIN ISO 26622-1:2013-08 | Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks (ISO 26622-1:2008) |
| DIN 28025:2003-02 | PN 10 to PN 40 stainless steel nozzles for vessels in process engineering applications |
| BS ISO 26623-1:2014 | Polygonal taper interface with flange contact surface Dimensions and designation of shanks |
| DIN ISO 7388-2:2014-07 | Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF (ISO 7388-2:2007) |
| EN 50216-12:2011 | Power transformer and reactor fittings - Part 12: Fans |
| EN 50180-3 : 2015 AMD 1 2017 | BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 3: REQUIREMENTS FOR BUSHING FIXATIONS |
| DIN EN 14420-3:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| DIN ISO 10889-4:2006-01 | TOOL HOLDERS WITH CYLINDRICAL SHANK - PART 4: TYPE C WITH RECTANGULAR AXIAL SEAT |
| BS EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
| DIN ISO 10889-7:2006-01 | TOOL HOLDERS WITH CYLINDRICAL SHANK - PART 7: TYPE F WITH TAPER SEAT |
| DIN EN 14420-7:2013-09 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| I.S. EN ISO/ASTM 52901:2018 | Additive manufacturing General principles - Requirements for purchased AM parts (ISO/ASTM 52901:2017) |
| I.S. EN 4710-04:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 04: SPRING CLAMP - ONE WAY TOLERANCE COMPENSATION |
| UNE-EN ISO 8362-6:2011 | Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials (ISO 8362-6:2010) |
| I.S. EN 4702-04:2017 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 04: SPRING CLAMP |
| I.S. EN 16313:2013 | CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G 3/4 A AND INSIDE CONE |
| UNE-EN ISO 8362-7:2011 | Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006) |
| I.S. EN 4710-07:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 07: RETAINING GROMMET |
| I.S. EN 4710-06:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 06: STUD - QUICK-RELEASE AND LOCKING |
| I.S. EN 4702-03:2017 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING |
| I.S. EN 4702-05:2017 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 05: RETAINING WASHER |
| I.S. EN 4710-05:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 05: SPRING CLAMP - TWO WAYS TOLERANCE COMPENSATION |
| UNE-EN 14423:2014 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| UNE-EN 50216-12:2011 | Power transformer and reactor fittings - Part 12: Fans |
| UNE-EN 16313:2014 | Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone |
| UNE-EN 14420-7:2014 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| UNE-EN 14420-5:2014 | Hose fittings with clamp units - Part 5: Threaded connections |
| UNE-EN 14420-3:2014 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| UNE-EN 14420-8:2014 | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
| UNE-EN 50180-3:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3: Requirements for bushing fixations |
| UNE-EN ISO 3964:2017 | Dentistry - Coupling dimensions for handpiece connectors (ISO 3964:2016) |
| UNE-EN 12881-1:2014 | Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
| I.S. EN 22768-1:1994 | GENERAL TOLERANCES - TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
| CEI EN 50216-12 : 2012 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 12: FANS |
| PREN 4710-06 : DRAFT 2014 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 06: STUD - QUICK-RELEASE AND LOCKING |
| DIN HDBK 1 E : 5ED 2014 | MECHANICAL ENGINEERING - BASIC STANDARDS 1 |
| PREN 4695 : DRAFT 2015 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE G, H AND K |
| I.S. EN 50180-3:2015 | BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 3: REQUIREMENTS FOR BUSHING FIXATIONS |
| PREN 4693 : DRAFT 2015 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE A, B AND C |
| PREN 4710-05 : DRAFT 2014 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 05: SPRING CLAMP - TWO WAYS TOLERANCE COMPENSATION |
| I.S. EN ISO 5459:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS |
| PREN 4710-07 : DRAFT 2014 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 07: RETAINING GROMMET |
| PREN 4710-04 : DRAFT 2014 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 04: SPRING CLAMP - ONE WAY TOLERANCE COMPENSATION |
| PREN 4692 : DRAFT 2015 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - LOCKING CLIP |
| I.S. CWA 14249:2003 | REVISED FUNSTEP APPLICATION REFERENCE MODEL |
| PREN 4694 : DRAFT 2015 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE D, E AND F |
| PREN 9300-110 : 200P2 | AEROSPACE SERIES - LOTAR - LONG TERM ARCHIVING AND RETRIEVAL OF DIGITAL TECHNICAL PRODUCT DOCUMENTATION SUCH AS 3D, CAD AND PDM DATA - PART 110: CAD MECHANICAL 3D EXPLICIT GEOMETRY INFORMATION |
| DIN ISO 8362-7:2007-06 | INJECTION CONTAINERS AND ACCESSORIES - PART 7: INJECTION CAPS MADE OF ALUMINIUM-PLASTICS COMBINATIONS WITHOUT OVERLAPPING PLASTICS PART |
| I.S. EN 12881-1:2014 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.