ISO 3269:2000
Withdrawn
Withdrawn
View Superseded by
Fasteners — Acceptance inspection
Available format(s)
Hardcopy , PDF
Language(s)
English, French, Russian
Published date
05-25-2000
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
| Committee |
ISO/TC 2/SC 7
|
| DevelopmentNote |
DRAFT ISO/DIS 3269 is also available for this standard. (01/2018)
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN 28736 : 1992 | Identical |
| NBN EN 28737 : 1992 | Identical |
| NBN EN 28738 : 1992 | Identical |
| NBN EN 22339 : 1992 | Identical |
| NBN EN 22340 : 1992 | Identical |
| NBN EN 22341 : 1992 | Identical |
| NBN EN 24766 : 1992 | Identical |
| NBN EN 27434 : 1992 | Identical |
| NBN EN 27435 : 1992 | Identical |
| NBN EN 27436 : 1992 | Identical |
| NBN EN 26157-1 : 1992 | Identical |
| NBN EN 26157-3 : 1992 | Identical |
| NBN EN ISO 3269 : 2000 | Identical |
| NEN EN ISO 3269 : 2000 | Identical |
| NS EN ISO 3269 : 1ED 2000 | Identical |
| I.S. EN ISO 3269:2000 | Identical |
| PN EN ISO 3269 : 2004 | Identical |
| SS-EN ISO 3269:2000 | Identical |
| BIS IS 1367-17 : 2005 | Identical |
| BS 6587:1985 | Similar to |
| BS EN ISO 3269:2001 | Identical |
| EN ISO 3269:2000 | Identical |
| NFE 25 006 : 1986 | Similar to |
| DIN ISO 3269:1992-12 | Identical |
| DIN EN ISO 3269:2000-11 | Identical |
| DIN 267-5:1986-02 | Similar to |
| JIS B 1091:2003 | Identical |
| GOST ISO 3269 : 2015 | Identical |
| UNE-EN ISO 3269:2000 | Identical |
| GOST R ISO 3269 : 2009 | Identical |
| BS EN ISO 14582:2013 | Fasteners. Hexalobular socket countersunk head screws, high head |
| BS EN 22338:1992 | Parallel pins, unhardened |
| ISO 15480:1999 | Hexagon washer head drilling screws with tapping screw thread |
| BS 7051(1989) : AMD 7492 | SPECIFICATION FOR HALF-LENGTH TAPER GROOVED PINS |
| I.S. EN ISO 2338:1998 | PARALLEL PINS, OF UNHARDENED STEEL AND AUSTENITIC STAINLESS STEEL |
| I.S. EN ISO 8739:1998 | GROOVED PINS - FULL-LENGTH PARALLEL GROOVED, WITH PILOT |
| I.S. EN ISO 8744:1998 | GROOVED PINS - FULL-LENGTH TAPER GROOVED |
| I.S. EN 24032:1992 | HEXAGON NUTS, STYLE 1 - PRODUCT GRADES A AND B |
| I.S. EN 24014:1992 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| BS 7855-1:1996 | Metric rivets for the attachment of friction linings Specification for semi-tubular rivets |
| 01/704435 DC : DRAFT FEB 2001 | ISO/DIS 16426 FASTENERS - QUALITY ASSURANCE SYSTEM |
| 09/30202626 DC : 0 | BS EN ISO 12474 - HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| 16/30340613 DC : 0 | BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS |
| DIN EN ISO 1479:2011-10 | Hexagon head tapping screws (ISO 1479:2011) |
| DIN ISO 1483:1990-08 | SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS (COMMON HEAD STYLE) |
| 16/30337587 DC | BS EN ISO 7042. Prevailing torque (all-metal) hexagon high nuts. Product grades A and B |
| 16/30337622 DC : DRAFT MAR 2016 | BS EN ISO 8674 - HEXAGON HIGH NUTS (STYLE 2), WITH FINE PITCH THREAD - PRODUCT GRADES A AND B |
| 16/30337626 DC : 0 | BS EN ISO 8673 - HEXAGON REGULAR NUTS (STYLE 1), WITH FINE PITCH THREAD - PRODUCT GRADES A AND B |
| BS 4219-3:1985 | Slotted set screws: metric series Specification for slotted set screws with long dog point |
| 16/30337594 DC : DRAFT APR 2016 | BS ISO 7044 - PREVAILING TORQUE (ALL-METAL) HEXAGON HIGH NUTS WITH FLANGE - PRODUCT GRADES A AND B |
| BS 7049(1989) : AMD 7490 | SPECIFICATION FOR HALF-LENGTH CENTRE GROOVED PINS |
| BS ISO 7041:2012 | Prevailing torque type hexagon nuts (with non-metallic insert), style 2. Property classes 9 and 12 |
| DIN EN ISO 4766:2011-11 | Slotted set screws with flat point (ISO 4766:2011) |
| DIN EN 16983:2017-09 | DISC SPRINGS - QUALITY SPECIFICATIONS - DIMENSIONS |
| BS 7059(1989) : AMD 7500 | SPECIFICATION FOR LIGHT DUTY COILED SPRING-TYPE STRAIGHT PINS |
| DIN ISO 1479:1990-08 | HEXAGON HEAD TAPPING SCREWS |
| ISO 7720:2012 | Prevailing torque type all-metal hexagon nuts, style 2 — Property class 9 |
| BS EN 28733:1992 | Parallel pins with internal thread, unhardened |
| ISO 4042:1999 | Fasteners — Electroplated coatings |
| I.S. EN 1515-4:2009 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| DIN ISO 7051:1990-08 | CROSS RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| BS 7635(1993) : 1993 AMD 8439 | SPECIFICATION FOR SLOTTED CHEESE HEAD SCREWS: PRODUCT GRADE A |
| BS ISO 15072:2012 | Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A |
| DD ENV 1090-6:2001 | Execution of steel structures Supplementary rules for stainless steel |
| 16/30337630 DC | BS EN ISO 7719. Prevailing torque (all-metal) hexagon regular nuts. Product grades A and B |
| BIS IS 2269 : 2006 | HEXAGON SOCKET HEAD CAP SCREWS |
| NF EN ISO 12474 : 2010 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| PREN 14399-8 : DRAFT 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| BIS IS 12427 : 2001 | FASTENERS - THREADED STEEL FASTENERS - HEXAGON HEAD TRANSMISSION TOWER BOLTS - SPECIFICATION |
| DIN EN 14399-10:2016-01 (Draft) | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| GOST R ISO 15973 : 2005 | CLOSED END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD (ALUMINIUM ALLOY BODY AND STECL MANDREL) |
| NF EN ISO 4766 : 2011 | SLOTTED SET SCREWS WITH FLAT POINT |
| I.S. EN ISO 14581:2013 | FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013) |
| BIS IS 1363-3 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 3: HEXAGON NUTS (SIZE RANGE M 5 TO M 64) |
| NF EN ISO 7053 : 2011 | HEXAGON WASHER HEAD TAPPING SCREWS |
| ISO 15071:2011 | Hexagon bolts with flange — Small series — Product grade A |
| EN 14399-8:2007 | High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies |
| DIN EN ISO 1483:2011-10 | Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011) |
| BS EN ISO 10683:2014 | Fasteners. Non-electrolytically applied zinc flake coatings |
| BIS IS 1364-6 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 6: HEXAGON NUTS, STYLE 2 |
| BS EN ISO 4042:2000 | Fasteners. Electroplated coatings |
| EN ISO 4042:1999 | Fasteners - Electroplated coatings (ISO 4042:1999) |
| I.S. EN ISO 10642:2004 | HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004) |
| EN ISO 4016:2011 | Hexagon head bolts - Product grade C (ISO 4016:2011) |
| EN ISO 4014:2011 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| DIN EN ISO 7719:2016-05 (Draft) | PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 (ISO 7719:2012) |
| DIN EN ISO 10512:2016-05 (Draft) | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10 (ISO 10512:2012) |
| DIN EN ISO 1234:1998-02 | SPLIT PINS |
| DIN EN ISO 7040:2016-05 (Draft) | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012) |
| DIN EN ISO 10673:2009-10 | Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009) |
| DIN EN 22339:1992-10 | UNHARDENED TAPER PINS |
| DIN EN 22340:1992-10 | CLEVIS PINS WITHOUT HEAD |
| DIN EN ISO 7045:2011-12 | Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011) |
| DIN EN ISO 10642:2013-04 | HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004 + AMD 1:2012) |
| BS EN 14399-5 : 2015-02 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 5: PLAIN WASHERS |
| DIN EN ISO 21670:2014-09 | FASTENERS - HEXAGON WELD NUTS WITH FLANGE (ISO 21670:2014) |
| BS EN ISO 1479:2011 | Hexagon head tapping screws |
| BS EN 26157-3:1992 | Fasteners. Surface discontinuities. Bolts, screws and studs for special requirements |
| BS EN ISO 7089:2000 | Plain washers. Normal series. Product grade A |
| BS EN ISO 10673:2009 | Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A |
| ISO 4029:2003 | Hexagon socket set screws with cup point |
| BS EN ISO 4762:2004 | Hexagon socket head cap screws |
| BS EN ISO 7045:2011 | Pan head screws with type H or type Z cross recess. Product grade A |
| BS EN ISO 4029:2003 | Hexagon socket set screws with cup point |
| BS EN 493:1992 | Fasteners. Surface discontinuities. Nuts |
| BS EN ISO 15974:2001 | Closed and blind rivets with break pull mandrel and countersunk head. AIA/St |
| BS EN ISO 15482:1999 | Cross recessed countersunk head drilling screws with tapping screw thread |
| BS EN ISO 10669:1999 | Plain washers for tapping screw and washer assemblies. Normal and large series. Product grade A |
| BS EN ISO 4032:2012 | Hexagon regular nuts (style 1). Product grades A and B |
| BS EN ISO 16426:2002 | Fasteners. Quality assurance system |
| BS EN ISO 14585:2011 | Hexalobular socket pan head tapping screws |
| BS EN ISO 15980:2002 | Open end blind rivets with break pull mandrel and countersunk head. St/St |
| BS EN ISO 7091:2000 | Plain washers. Normal series. Product grade C |
| BS EN ISO 1482:2011 | Slotted countersunk (flat) head tapping screws |
| BS EN ISO 1481:2011 | Slotted pan head tapping screws |
| BS EN ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts. Property classes 5, 8 and 10 |
| BS EN 14218:2003 | Hexagon nuts with flange. Fine pitch thread |
| ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B |
| BS EN ISO 14579:2011 | Hexalobular socket head cap screws |
| BS EN 1662:1998 | Hexagon bolts with flange. Small series |
| ISO 4016:2011 | Hexagon head bolts — Product grade C |
| BS EN ISO 8750:2007 | Spring-type straight pins. Coiled, standard duty |
| BS EN ISO 8752:2009 | Spring-type straight pins. Slotted, heavy duty |
| I.S. EN ISO 4014:2011 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| I.S. EN ISO 21269:2004 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| I.S. EN ISO 4034:2012 | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012) |
| I.S. EN ISO 1482:2011 | SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| I.S. EN ISO 2010:2011 | SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A (ISO 2010:2011) |
| I.S. EN ISO 8748:2007 | SPRING-TYPE STRAIGHT PINS - COILED, HEAVY DUTY |
| I.S. EN ISO 7045:2011 | PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7045:2011) |
| I.S. EN ISO 14585:2011 | HEXALOBULAR SOCKET PAN HEAD TAPPING SCREWS |
| I.S. EN ISO 4018:2011 | HEXAGON HEAD SCREWS - PRODUCT GRADE C |
| DIN EN ISO 4017:2015-05 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
| DIN EN ISO 4029:2004-05 | Hexagon socket set screws with cup point (ISO 4029:2003); German version EN ISO 4029:2003 |
| DIN EN ISO 15983:2003-04 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD - A2/A2 |
| DIN EN ISO 8750:2007-07 | Spring-type straight pins - Coiled, standard duty (ISO 8750:2007) |
| DIN EN ISO 10683:2001-02 | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| DIN EN 14399-8:2008-03 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| EN ISO 4029:2003 | Hexagon socket set screws with cup point (ISO 4029:2003) |
| NF EN ISO 4018 : 2011 | HEXAGON HEAD SCREWS - PRODUCT GRADE C |
| DIN EN ISO 14581:2014-02 | Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013) |
| 07/30139530 DC : 0 | BS ISO 8752 - SPRING-TYPE STRAIGHT PINS - SLOTTED, HEAVY DUTY |
| DIN 7989-1:2001-04 | Washers for steel structures - Part 1: Product grade C |
| DIN EN 1662:1998-02 | Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified) |
| 09/30208230 DC : 0 | BS ISO 1483 - SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| 09/30203245 DC : 0 | BS ISO 7380-2 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 2: BUTTON HEAD WITH COLLAR (HEAD SHAPE B) |
| I.S. EN 24034:1992 | HEXAGON NUTS - PRODUCT GRADE C |
| BS 4219-1:1985 | Slotted set screws: metric series Specification for slotted set screws with flat point |
| BS 4219-2:1985 | Slotted set screws: metric series Specification for slotted set screws with cone point |
| I.S. EN 24018:1992 | HEXAGONAL HEAD SCREWS - PRODUCT GRADES C |
| I.S. EN ISO 16228:2018 | FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017) |
| 11/30229160 DC : 0 | BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS |
| I.S. EN ISO 7380-1:2011 | BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS |
| I.S. EN ISO 8734:1998 | PARALLEL PINS, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL (DOWEL PINS) |
| I.S. EN ISO 8735:1998 | PARALLEL PINS WITH INTERNAL THREAD, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL |
| I.S. EN ISO 8741:1998 | GROOVED PINS - HALF-LENGTH REVERSE-TAPER GROOVED |
| 09/30208217 DC : 0 | BS ISO 1207 - SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A |
| DIN ISO 1481:1990-08 | SLOTTED PAN HEAD TAPPING SCREWS |
| BS ISO 7720:2012 | Prevailing torque type all-metal hexagon nuts, style 2. Property class 9 |
| 16/30337618 DC : 0 | BS EN ISO 8675 - HEXAGON THIN NUTS (STYLE 0) CHAMFERED, WITH FINE PITCH THREAD - PRODUCT GRADES A AND B |
| DIN ISO 7050:1990-08 | CROSS RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS (COMMON HEAD STYLE) |
| 09/30208248 DC : 0 | BS ISO 7053 - HEXAGON WASHER HEAD TAPPING SCREWS |
| PREN ISO 1482 : DRAFT 2009 | SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| 09/30208224 DC : 0 | BS ISO 1481 - SLOTTED PAN HEAD TAPPING SCREWS |
| DIN EN ISO 7051:2011-11 | Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011) |
| DIN EN ISO 1481:2011-10 | Slotted pan head tapping screws (ISO 1481:2011) |
| 09/30208239 DC : 0 | BS ISO 7049 - CROSS RECESSED PAN HEAD TAPPING SCREWS |
| BS 7050(1989) : AMD 7491 | SPECIFICATION FOR FULL-LENGTH TAPER GROOVED PINS |
| 16/30337580 DC : 0 | BS EN ISO 7040 - PREVAILING TORQUE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B |
| 18/30359968 DC : DRAFT APR 2018 | BS EN ISO 15480 - HEXAGON WASHER HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD |
| I.S. EN ISO 7053:2011 | HEXAGON WASHER HEAD TAPPING SCREWS |
| BS 7045(1989) : AMD 7486 | SPECIFICATION FOR FULL-LENGTH PARALLEL GROOVED PINS, WITH PILOT |
| BS 7055(1989) : AMD 7496 | SPECIFICATION FOR HARDENED PARALLEL PINS (DOWEL PINS) |
| 07/30139533 DC : 0 | BS ISO 13337 - SPRING-TYPE STRAIGHT PINS - SLOTTED, LIGHT DUTY |
| I.S. EN 14399-10:2009 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| DIN EN ISO 7380-2:2011-11 | Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011) |
| DIN EN 14399-8:2016-01 (Draft) | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| ISO 7041:2012 | Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12 |
| NF EN ISO 7380-2 : 2011 | BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR |
| GOST R ISO 15974 : 2005 | CLOSED END BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD (ALUMINIUM ALLOY BODY AND STEEL MANDREL) |
| I.S. EN ISO 7380-2:2011 | BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR |
| ISO 7053:2011 | Hexagon washer head tapping screws |
| BS EN ISO 7380-2:2011 | Button head screws Hexagon socket button head screws with collar |
| I.S. EN ISO 12474:2010 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| ISO 8678:1988 | Cup head square neck bolts with small head and short neck — Product grade B |
| ISO 7091:2000 | Plain washers — Normal series — Product grade C |
| PREN ISO 1207 : DRAFT 2009 | SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A |
| PREN 14399-10 : DRAFT 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| ISO 7043:2012 | Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 — Product grades A and B |
| SAE J430_201611 | Mechanical and Chemical Requirements for Nonthreaded Fasteners Carbon Steel Solid Rivets - Inch Series |
| DIN EN 14399-9:2016-01 (Draft) | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| EN 14399-10:2018 | High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload |
| EN ISO 4017:2014 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
| DIN EN ISO 8675:2016-05 (Draft) | HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012) |
| DIN EN ISO 8765:2011-06 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
| DIN EN ISO 8676:2011-07 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
| DIN EN ISO 14586:2011-05 | Hexalobular socket countersunk head tapping screws (ISO 14586:2011) |
| DIN EN ISO 14587:2011-05 | Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011) |
| DIN EN ISO 8673:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012) |
| BS EN ISO 15978:2002 | Open end blind rivets with break pull mandrel and countersunk head. AIA/St |
| BS EN ISO 15981:2002 | Open end blind rivets with break pull mandrel and protruding head. AIA/AIA |
| BS EN ISO 4027:2003 | Hexagon socket set screws with cone point |
| ISO 7092:2000 | Plain washers — Small series — Product grade A |
| ISO 8737:1986 | Taper pins with external thread, unhardened |
| BS EN ISO 8735:1998 | Parallel pins with internal thread, of hardened steel or martensitic stainless steel |
| BS EN ISO 8740:1998 | Grooved pins. Full-length parallel grooved, with chamfer |
| BS EN ISO 7051:2011 | Cross-recessed raised countersunk (oval) head tapping screws |
| ISO 15981:2002 | Open end blind rivets with break pull mandrel and protruding head — AIA/AIA |
| BS EN ISO 16583:2002 | Open end blind rivets with break pull mandrel and countersunk head. Cu/St or Cu/Br or Cu/SSt |
| BS EN ISO 4033:2012 | Hexagon high nuts (style 2). Product grades A and B |
| ISO 10642:2004 | Hexagon socket countersunk head screws |
| BS EN ISO 15976:2002 | Closed end blind rivets with break pull mandrel and protruding head. St/St |
| BS EN 22339:1992 | Taper pins, unhardened |
| ISO 7049:2011 | Cross-recessed pan head tapping screws |
| BS EN ISO 8733:1998 | Parallel pins with internal thread, of unhardened steel or austenitic stainless steel |
| BS EN ISO 7047:2011 | Raised countersunk head screws (common head style) with type H or type Z cross recess. Product grade A |
| BS EN 1665:1997 | Hexagon bolts with flange. Heavy series |
| BS EN ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0). Product grade B |
| I.S. EN ISO 4762:2004 | HEXAGON SOCKET HEAD CAP SCREWS |
| I.S. EN 14399-3:2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES |
| I.S. EN 14399-4:2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES |
| I.S. EN ISO 4032:2012 | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012) |
| I.S. EN ISO 7719:2012 | PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 (ISO 7719:2012) |
| I.S. EN ISO 8751:2007 | SPRING-TYPE STRAIGHT PINS - COILED, LIGHT DUTY |
| I.S. EN ISO 14583:2011 | HEXALOBULAR SOCKET PAN HEAD SCREWS |
| I.S. EN ISO 21670:2014 | FASTENERS - HEXAGON WELD NUTS WITH FLANGE (ISO 21670:2014) |
| I.S. EN ISO 7049:2011 | CROSS-RECESSED PAN HEAD TAPPING SCREWS |
| I.S. EN ISO 1483:2011 | SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| I.S. EN ISO 8750:2007 | SPRING-TYPE STRAIGHT PINS - COILED, STANDARD DUTY |
| I.S. EN ISO 8752:2009 | SPRING-TYPE STRAIGHT PINS - SLOTTED, HEAVY DUTY |
| DIN EN ISO 7046-2:2011-12 | Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011) |
| DIN EN ISO 7380:2004-05 | HEXAGON SOCKET BUTTON HEAD SCREWS |
| I.S. EN ISO 7042:2012 | PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12 (ISO 7042:2012) |
| I.S. EN ISO 8673:2012 | HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012) |
| DIN EN 24032:1992-02 | HEXAGON NUTS, STYLE 1 - PRODUCT GRADES A AND B |
| DIN EN 24014:1992-02 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| DIN EN 24036:1992-02 | HEXAGON THIN NUTS - PRODUCT GRADE B (UNCHAMFERED) |
| I.S. EN ISO 4036:2012 | HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B (ISO 4036:2012) |
| DIN 34820:2004-05 | CHAMFERED PLAIN WASHERS FOR USE IN STRUCTURAL STEELWORK |
| I.S. EN ISO 8676:2011 | HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| DIN EN 24035:1992-02 | HEXAGON THIN NUTS (CHAMFERED) - PRODUCT GRADES A AND B |
| I.S. EN ISO 10512:2012 | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10 (ISO 10512:2012) |
| I.S. EN ISO 8675:2012 | HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012) |
| I.S. EN 14399-6:2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 6: PLAIN CHAMFERED WASHERS |
| I.S. EN ISO 4033:2012 | HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012) |
| I.S. EN ISO 4016:2011 | HEXAGON HEAD BOLTS - PRODUCT GRADE C |
| I.S. EN ISO 10673:2009 | PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES - SMALL, NORMAL AND LARGE SERIES - PRODUCT GRADE A |
| I.S. EN ISO 14587:2011 | HEXALOBULAR SOCKET RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| I.S. EN ISO 7047:2011 | RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7047:2011) |
| I.S. EN ISO 7046-2:2011 | COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS (ISO 7046-2:2011) |
| I.S. EN ISO 14580:2011 | HEXALOBULAR SOCKET CHEESE HEAD SCREWS |
| I.S. EN ISO 10511:2012 | PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT) (ISO 10511:2012) |
| I.S. EN ISO 10513:2012 | PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12 (ISO 10513:2012) |
| I.S. EN 14399-5:2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 5: PLAIN WASHERS |
| I.S. EN ISO 7051:2011 | CROSS-RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| I.S. EN ISO 14579:2011 | HEXALOBULAR SOCKET HEAD CAP SCREWS |
| I.S. EN ISO 4017:2014 | FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014) |
| I.S. EN ISO 1580:2011 | SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A (ISO 1580:2011) |
| DIN EN 1665:1998-11 | Hexagon bolts with flange - heavy series; English version of DIN EN 1665 |
| DIN EN 24034:1992-02 | HEXAGON NUTS - PRODUCT GRADES C |
| DIN EN ISO 7046-1:2011-12 | Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel screws of property class 4.8 (ISO 7046-1:2011) |
| I.S. EN ISO 13337:2009 | SPRING-TYPE STRAIGHT PINS - SLOTTED, LIGHT DUTY |
| I.S. EN ISO 8765:2011 | HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| DIN EN 14399-3:2015-04 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES |
| I.S. EN ISO 7040:2012 | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012) |
| I.S. EN ISO 14584:2011 | HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS |
| I.S. EN ISO 8674:2012 | HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012) |
| I.S. EN ISO 1479:2011 | HEXAGON HEAD TAPPING SCREWS |
| I.S. EN ISO 7048:2011 | CROSS-RECESSED CHEESE HEAD SCREWS |
| DIN EN 24017:1992-02 | HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B |
| DIN EN 22341:1992-10 | Clevis pins with head (ISO 2341:1986); german version EN 22341:1992 |
| I.S. EN ISO 1207:2011 | SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A |
| I.S. EN ISO 7050:2011 | CROSS-RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| I.S. EN ISO 1481:2011 | SLOTTED PAN HEAD TAPPING SCREWS |
| I.S. EN ISO 2009:2011 | SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A (ISO 2009:2011) |
| I.S. EN ISO 7046-1:2011 | COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 1: STEEL OF PROPERTY CLASS 4.8 (ISO 7046-1:2011) |
| DIN EN 24018:1992-02 | HEXAGON HEAD SCREWS - PRODUCT GRADE C |
| I.S. EN ISO 14586:2011 | HEXALOBULAR SOCKET COUNTERSUNK HEAD TAPPING SCREWS |
| I.S. EN ISO 4035:2012 | HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B (ISO 4035:2012) |
| BS 4168-3:1994 | Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with cone point |
| BS 4168-5:1994 | Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with cup point |
| NF EN ISO 4014 : 2011 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| NF EN ISO 8676 : 2011 | HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| NF EN ISO 8765 : 2011 | HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| NF EN ISO 4016 : 2011 | HEXAGON HEAD BOLTS - PRODUCT GRADE C |
| BS 4168-4:1994 | Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with dog point |
| BS 4894:1993 | Specification for bifurcated rivets for general purpose use (metric series) |
| BS ISO 4162:2012 | Hexagon bolts with flange. Small series. Product grade A with driving feature of product grade B |
| I.S. EN 24035:1992 | HEXAGON THIN NUTS (CHAMFERED) - PRODUCT GRADES A AND B |
| I.S. EN 493:1993 | FASTENERS - SURFACE DISCONTINUITIES - NUTS |
| 09/30208236 DC : 0 | BS ISO 4766 - SLOTTED SET SCREWS WITH FLAT POINT |
| BS EN ISO 4519:2016 | Electrodeposited metallic coatings and related finishes. Sampling procedures for inspection by attributes |
| I.S. EN ISO 8742:1998 | GROOVED PINS - ONE-THIRD-LENGTH CENTRE GROOVED |
| I.S. EN ISO 8743:1998 | GROOVED PINS - HALF-LENGTH CENTRE GROOVED |
| BS EN ISO 12474:2010 | Hexagon socket head cap screws with metric fine pitch thread |
| 16/30337591 DC : DRAFT APR 2016 | BS ISO 7043 - PREVAILING TORQUE HEXAGON HIGH NUTS WITH FLANGE (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B |
| 16/30337584 DC : 0 | BS ISO 7041 - PREVAILING TORQUE HEXAGON HIGH NUTS (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B |
| DIN EN ISO 7380-1:2011-11 | Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) |
| DIN ISO 8992:2005-09 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
| 15/30280562 DC : 0 | BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS |
| PREN 14399-9 : DRAFT 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| PREN ISO 4766 : DRAFT 2009 | SLOTTED SET SCREWS WITH FLAT POINT |
| BS 7056(1989) : AMD 7497 | SPECIFICATION FOR HARDENED PARALLEL PINS WITH INTERNAL THREAD |
| DIN EN ISO 4519:2016-08 | ELECTRODEPOSITED METALLIC COATINGS AND RELATED FINISHES - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES (ISO 4519:1980) |
| 15/30332551 DC : 0 | BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| BS 6041(1981) : 1981 | METHOD OF SAMPLING OF ELECTRODEPOSITED METALLIC COATINGS AND RELATED FINISHES: PROCEDURES FOR INSPECTION BY ATTRIBUTES |
| 09/30208242 DC : 0 | BS ISO 7050 - CROSS RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| BS EN ISO 7053:2011 | Hexagon washer head tapping screws |
| ISO 10509:2012 | Hexagon flange head tapping screws |
| I.S. EN ISO 14582:2013 | FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013) |
| I.S. EN 16983:2016 | DISC SPRINGS - QUALITY SPECIFICATIONS - DIMENSIONS |
| ISO 4162:2012 | Hexagon bolts with flange — Small series — Product grade A with driving feature of product grade B |
| ISO 7044:2012 | Prevailing torque type all-metal hexagon nuts with flange, style 2 — Product grades A and B |
| EN ISO 10683:2014 | Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014) |
| ISO 13584-511:2006 | Industrial automation systems and integration — Parts library — Part 511: Mechanical systems and components for general use — Reference dictionary for fasteners |
| EN 14399-7:2007 | High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies |
| BIS IS 1363-1 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 1: HEXAGON HEAD BOLTS (SIZE RANGE M 5 TO M 64) |
| DIN EN ISO 4042:2001-01 | FASTENERS - ELECTROPLATED COATINGS |
| ISO 12125:2012 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2 — Product grades A and B |
| ISO 4762:2004 | Hexagon socket head cap screws |
| EN ISO 16228:2018 | Fasteners - Types of inspection documents (ISO 16228:2017) |
| ISO 15072:2012 | Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A |
| ISO 7380:2004 | Hexagon socket button head screws |
| DIN EN ISO 10683:2016-07 (Draft) | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| ISO 10663:2012 | Hexagon nuts with flange, style 2 — Fine pitch thread |
| ISO 7412:1984 | Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) — Product grade C — Property classes 8.8 and 10.9 |
| I.S. EN ISO 7091:2000 | PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C |
| DIN EN ISO 7042:2016-05 (Draft) | PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12 (ISO 7042:2012) |
| DIN EN 1663:1998-02 | PREVAILING TORQUE TYPE HEXAGON NUTS WITH FLANGE (WITH NON-METALLIC INSERT) |
| DIN EN ISO 7047:2011-12 | Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011) |
| DIN EN ISO 7048:2011-07 | Cross-recessed cheese head screws (ISO 7048:2011) |
| DIN EN ISO 7093-1:2000-11 | PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A |
| DIN EN ISO 4762:2004-06 | Hexagon socket head cap screws (ISO 4762:2004); German version EN ISO 4762:2004 |
| DIN EN ISO 14585:2011-05 | Hexalobular socket pan head tapping screws (ISO 14585:2011) |
| DIN EN ISO 1580:2011-12 | Slotted pan head screws - Product grade A (ISO 1580:2011) |
| DIN EN ISO 4034:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012) |
| DIN EN ISO 8674:2016-05 (Draft) | HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012) |
| ISO 4028:2003 | Hexagon socket set screws with dog point |
| BS EN ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread. Product grades A and B |
| ISO 4017:2014 | Fasteners — Hexagon head screws — Product grades A and B |
| ISO 8748:2007 | Spring-type straight pins — Coiled, heavy duty |
| BS EN ISO 4028:2003 | Hexagon socket set screws with dog point |
| BS EN ISO 8739:1998 | Grooved pins. Full-length parallel grooved, with pilot |
| BS EN ISO 7042:2012 | Prevailing torque type all-metal hexagon high nuts. Property classes 5, 8, 10 and 12 |
| BS EN ISO 21269:2004 | Hexagon socket head cap screws with metric fine pitch thread |
| BS EN 27435:1992 | Slotted set screws with long dog point |
| BS EN ISO 1483:2011 | Slotted raised countersunk (oval) head tapping screws |
| BS EN ISO 15983:2002 | Open end blind rivets with break pull mandrel and protruding head. A2/A2 |
| ISO 16585:2002 | Closed end blind rivets with pull mandrel and protruding head — A2/SSt |
| ISO 8741:1997 | Grooved pins — Half-length reverse-taper grooved |
| BS EN ISO 10513:2012 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread. Property classes 8, 10 and 12 |
| BS EN 1664:1998 | Prevailing torque type all-metal hexagon nuts with flange |
| BS EN ISO 16585:2002 | Closed end blind rivets with pull mandrel and protruding head. A2/SSt |
| BS EN ISO 15982:2002 | Open end blind rivets with break pull mandrel and countersunk head. AIA/AIA |
| ISO 7048:2011 | Cross-recessed cheese head screws |
| ISO 14585:2011 | Hexalobular socket pan head tapping screws |
| BS EN ISO 4018:2011 | Hexagon head screws. Product grade C |
| ISO 8746:1997 | Grooved pins with round head |
| ISO 8743:1997 | Grooved pins — Half-length centre grooved |
| BS EN ISO 15480:1999 | Hexagon washer head drilling screws with tapping screw thread |
| ISO 7090:2000 | Plain washers, chamfered — Normal series — Product grade A |
| EN ISO 8739:1997 | Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997) |
| EN 1666:1997 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread (ISO 12125:1997, modified) |
| EN ISO 8748:2007 | Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007) |
| EN ISO 7049:2011 | Cross-recessed pan head tapping screws (ISO 7049:2011) |
| EN ISO 15980:2002 | Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002) |
| EN ISO 7048:2011 | Cross-recessed cheese head screws (ISO 7048:2011) |
| EN ISO 14586:2011 | Hexalobular socket countersunk head tapping screws (ISO 14586:2011) |
| EN ISO 10513:2012 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012) |
| EN ISO 15973:2000 | Closed end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15973:2000) |
| I.S. EN ISO 7094:2000 | PLAIN WASHERS - EXTRA LARGE SERIES - PRODUCT GRADE C |
| EN ISO 1234:1997 | Split pins (ISO 1234:1997) |
| EN ISO 14583:2011 | Hexalobular socket pan head screws (ISO 14583:2011) |
| BS 7058(1989) : AMD 7499 | SPECIFICATION FOR STANDARD DUTY COILED SPRING-TYPE STRAIGHT PINS |
| DIN EN ISO 7050:2011-11 | Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011) |
| BS 7052(1989) : AMD 7493 | SPECIFICATION FOR ROUND HEAD GROOVED PINS |
| DIN ISO 7049:1990-08 | CROSS RECESSED PAN HEAD TAPPING SCREWS |
| 08/30179025 DC : DRAFT MAR 2008 | BS EN ISO 10673 - PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES - SMALL, NORMAL AND LARGE SERIES - PRODUCT GRADE A |
| ISO 16228:2017 | Fasteners — Types of inspection documents |
| I.S. EN ISO 8733:1998 | PARALLEL PINS WITH INTERNAL THREAD, OF UNHARDENED STEEL OR AUSTENITIC STAINLESS STEEL |
| I.S. EN ISO 8747:1998 | GROOVED PINS WITH COUNTERSUNK HEAD |
| BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
| 09/30203242 DC : 0 | BS ISO 7380-1 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 1: BUTTON HEAD (HEAD SHAPE A) |
| I.S. EN ISO 8740:1998 | GROOVED PINS - FULL-LENGTH PARALLEL GROOVED, WITH CHAMFER |
| I.S. EN ISO 8745:1998 | GROOVED PINS - HALF-LENGTH TAPER GROOVED |
| IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
| PREN ISO 1481 : DRAFT 2009 | SLOTTED PAN HEAD TAPPING SCREWS |
| 15/30280509 DC : 0 | BS EN ISO 1891-4 - FASTENERS - TERMINOLOGY - PART 4: CONTROLS, INSPECTION, DELIVERY, ACCEPTANCE AND QUALITY |
| DIN EN ISO 1482:2011-10 | Slotted countersunk (flat) head tapping screws (ISO 1482:2011) |
| DIN 7989-2:2001-04 | Washers for steel structures - Part 2: Product grade A |
| DIN 440:2001-03 | Washers with square hole for use in timber constructions |
| ONORM EN ISO 7053 : 2011 | HEXAGON WASHER HEAD TAPPING SCREWS (ISO 7053:2011) |
| BS EN 1515-4:2009 | Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| BS ISO 10663:2012 | Hexagon nuts with flange, style 2. Fine pitch thread |
| BS 7047(1989) : AMD 7488 | SPECIFICATION FOR HALF-LENGTH REVERSE TAPER GROOVED PINS |
| PREN ISO 7050 : DRAFT 2009 | CROSS RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| BS EN ISO 7380-1:2011 | Button head screws Hexagon socket button head screws |
| DIN EN ISO 7049:2011-11 | Cross-recessed pan head tapping screws (ISO 7049:2011) |
| BS 7057(1989) : AMD 7498 | SPECIFICATION FOR HEAVY DUTY COILED SPRING-TYPE STRAIGHT PINS |
| BS EN ISO 16228:2018 | Fasteners. Types of inspection documents |
| I.S. EN ISO 4519:2016 | ELECTRODEPOSITED METALLIC COATINGS AND RELATED FINISHES - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES (ISO 4519:1980) |
| I.S. EN ISO 4042:1999 | FASTENERS - ELECTROPLATED COATINGS |
| ISO 4161:2012 | Hexagon nuts with flange, style 2 — Coarse thread |
| PREN ISO 1483 : DRAFT 2009 | SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| BS EN 14399-7:2007 | High-strength structural bolting assemblies for preloading System HR. Countersunk head bolt and nut assemblies |
| PREN ISO 7051 : DRAFT 2009 | CROSS RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| DIN EN ISO 12474:2011-01 | Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010) |
| BS EN 14399-10:2009 | High-strength structural bolting assemblies for preloading System HRC. Bolt and nut assemblies with calibrated preload |
| 15/30332548 DC : 0 | BS EN 14399-8 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| PREN ISO 7049 : DRAFT 2009 | CROSS RECESSED PAN HEAD TAPPING SCREWS |
| ISO 4775:1984 | Hexagon nuts for high-strength structural bolting with large width across flats — Product grade B — Property classes 8 and 10 |
| ISO 7379:1983 | Hexagon socket head shoulder screws |
| DIN EN ISO 4032:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012) |
| DIN EN 27436:1992-10 | Slotted set screws with cup point (ISO 7436:1983); german version EN 27436:1992 |
| DIN EN ISO 2010:2011-12 | Slotted raised countersunk head screws - Product grade A (ISO 2010:2011) |
| DIN EN 28738:1992-10 | PLAIN WASHERS FOR CLEVIS PINS - PRODUCT GRADE A |
| DIN EN 27435:1992-10 | Slotted set screws with long dog point (ISO 7435:1983); german version EN 27435:1992 |
| DIN EN ISO 7093-2:2000-11 | PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C |
| DIN EN ISO 14584:2011-06 | Hexalobular socket raised countersunk head screws (ISO 14584:2011) |
| DIN EN 27434:1992-10 | Slotted set screws with cone point (ISO 7434:1983); german version EN 27434:1992 |
| DIN EN 26157-3:1991-12 | FASTENERS - SURFACE DISCONTINUITIES - BOLTS, SCREWS AND STUDS SUBJECT FOR SPECIAL REQUIREMENTS |
| DIN EN ISO 6157-2:2004-10 | Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995) |
| DIN EN ISO 2009:2011-12 | Slotted countersunk flat head screws - Product grade A (ISO 2009:2011) |
| DIN EN ISO 16426:2003-06 | FASTENERS - QUALITY ASSURANCE SYSTEM |
| BS EN ISO 21670:2014 | Fasteners. Hexagon weld nuts with flange |
| BS EN 14399-6:2005 | High-strength structural bolting assemblies for preloading Plain chamfered washers |
| BS EN ISO 10642 : 2004 | HEXAGON SOCKET COUNTERSUNK HEAD SCREWS |
| BS EN ISO 2342:2003 | Slotted headless screws with shank |
| BS EN 1661:1998 | Hexagon nuts with flange |
| BS EN 14399-3:2015 | High-strength structural bolting assemblies for preloading System HR. Hexagon bolt and nut assemblies |
| ISO 1483:2011 | Slotted raised countersunk (oval) head tapping screws |
| ISO 15483:1999 | Cross recessed raised countersunk head drilling screws with tapping screw thread |
| BS EN ISO 10512:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread. Property classes 6, 8 and 10 |
| BS EN ISO 8744:1998 | Grooved pins. Full-length taper grooved |
| BS EN ISO 10511:2012 | Prevailing torque type hexagon thin nuts (with non-metallic insert) |
| ISO 13337:2009 | Spring-type straight pins — Slotted, light duty |
| BS EN 27436:1992 | Slotted set screws with cup point |
| ISO 10673:2009 | Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A |
| ISO 15982:2002 | Open end blind rivets with break pull mandrel and countersunk head — AIA/AIA |
| BS EN ISO 4014:2011 | Hexagon head bolts. Product grades A and B |
| ISO 7045:2011 | Pan head screws with type H or type Z cross recess — Product grade A |
| ISO 7042:2012 | Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12 |
| ISO 15482:1999 | Cross recessed countersunk head drilling screws with tapping screw thread |
| ISO 6157-3:1988 | Fasteners — Surface discontinuities — Part 3: Bolts, screws and studs for special requirements |
| ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) — Product grades A and B |
| ISO 14579:2011 | Hexalobular socket head cap screws |
| ISO 8733:1997 | Parallel pins with internal thread, of unhardened steel and austenitic stainless steel |
| ISO 4033:2012 | Hexagon high nuts (style 2) — Product grades A and B |
| BS EN ISO 7090:2000 | Plain washers, chamfered. Normal series. Product grade A |
| ISO 8752:2009 | Spring-type straight pins — Slotted, heavy duty |
| ISO 6157-2:1995 | Fasteners — Surface discontinuities — Part 2: Nuts |
| BS EN ISO 15483:1999 | Cross recessed raised countersunk head drilling screws with tapping screw thread |
| BS EN ISO 14584:2011 | Hexalobular socket raised countersunk head screws |
| BS EN ISO 4035:2012 | Hexagon thin nuts chamfered (style 0). Product grades A and B |
| BS EN 1663:1998 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) |
| BS EN ISO 15973:2001 | Closed and blind rivets with break pull mandrel and protruding head. AIA/St |
| ISO 8750:2007 | Spring-type straight pins — Coiled, standard duty |
| ISO 8744:1997 | Grooved pins — Full-length taper grooved |
| BS EN ISO 7046-2:2011 | Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws |
| BS EN 14219:2003 | Hexagon bolts with flange with metric fine pitch thread. Small series |
| BS EN ISO 8676:2011 | Hexagon head screws with metric fine pitch thread. Product grades A and B |
| BS EN ISO 7050:2011 | Cross-recessed countersunk (flat) head tapping screws |
| BS EN ISO 8743:1998 | Grooved pins. Half-length centre grooved |
| BS EN ISO 14586:2011 | Hexalobular socket countersunk head tapping screws |
| BS EN ISO 1207:2011 | Slotted cheese head screws. Product grade A |
| BS EN 22341:1992 | Clevis pins with head |
| BS EN ISO 4016:2011 | Hexagon head bolts. Product grade C |
| ISO 4034:2012 | Hexagon regular nuts (style 1) — Product grade C |
| ISO 7093-2:2000 | Plain washers — Large series — Part 2: Product grade C |
| ISO 14586:2011 | Hexalobular socket countersunk head tapping screws |
| ISO 15980:2002 | Open end blind rivets with break pull mandrel and countersunk head — St/St |
| BS EN ISO 7380:2004 | Hexagon socket button head screws |
| ISO 14587:2011 | Hexalobular socket raised countersunk (oval) head tapping screws |
| BS EN ISO 15977:2002 | Open end blind rivets with break pull mandrel and protruding head. AIA/St |
| BS EN ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread. Product grades A and B |
| BS EN 27434:1992 | Slotted set screws with cone point |
| ISO 12474:2010 | Hexagon socket head cap screws with metric fine pitch thread |
| ISO 16583:2002 | Open end blind rivets with break pull mandrel and countersunk head — Cu/St or Cu/Br or Cu/SSt |
| BS EN ISO 7048:2011 | Cross-recessed cheese head screws |
| ISO 8742:1997 | Grooved pins — One-third-length centre grooved |
| ISO 7051:2011 | Cross-recessed raised countersunk (oval) head tapping screws |
| ISO 8738:1986 | Plain washers for clevis pins — Product grade A |
| ISO 15975:2002 | Closed end blind rivets with break pull mandrel and protruding head — AI/AIA |
| ISO 16582:2002 | Open end blind rivets with break pull mandrel and protruding head — Cu/St or Cu/Br or Cu/SSt |
| ISO 8676:2011 | Hexagon head screws with metric fine pitch thread — Product grades A and B |
| ISO 7380-1:2011 | Button head screws — Part 1: Hexagon socket button head screws |
| ISO 2342:2003 | Slotted headless screws with shank |
| ISO 2009:2011 | Slotted countersunk flat head screws — Product grade A |
| BS EN ISO 15481:1999 | Cross recessed pan head drilling screws with tapping screw thread |
| ISO 7046-1:2011 | Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel screws of property class 4.8 |
| BS EN ISO 14587:2011 | Hexalobular socket raised countersunk (oval) head tapping screws |
| ISO 2341:1986 | Clevis pins with head |
| ISO 7093-1:2000 | Plain washers — Large series — Part 1: Product grade A |
| BS EN ISO 8734:1998 | Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins) |
| ISO 4014:2011 | Hexagon head bolts — Product grades A and B |
| ISO 7050:2011 | Cross-recessed countersunk (flat) head tapping screws |
| ISO 7380-2:2011 | Button head screws — Part 2: Hexagon socket button head screws with collar |
| ISO 14581:2013 | Fasteners — Hexalobular socket countersunk flat head screws |
| ISO 15973:2000 | Closed end blind rivets with break pull mandrel and protruding head — AlA/St |
| ISO 4766:2011 | Slotted set screws with flat point |
| ISO 8734:1997 | Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins) |
| ISO 15979:2002 | Open end blind rivets with break pull mandrel and protruding head — St/St |
| ISO 1482:2011 | Slotted countersunk (flat) head tapping screws |
| ISO 6157-1:1988 | Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements |
| ISO 8747:1997 | Grooved pins with countersunk head |
| ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
| ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10 |
| BS EN ISO 8745:1998 | Grooved pins. Half-length taper grooved |
| ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0) — Product grade B |
| BS EN ISO 8748:2007 | Spring-type straight pins. Coiled, heavy duty |
| BS EN ISO 7049:2011 | Cross-recessed pan head tapping screws |
| ISO 8745:1997 | Grooved pins — Half-length taper grooved |
| ISO 8740:1997 | Grooved pins — Full-length parallel grooved, with chamfer |
| BS EN 28738:1992 | Plain washers for clevis pins. Product grade A |
| ISO 21269:2004 | Hexagon socket head cap screws with metric fine pitch thread |
| ISO 10511:2012 | Prevailing torque type hexagon thin nuts (with non-metallic insert) |
| ISO 16426:2002 | Fasteners — Quality assurance system |
| ISO 7046-2:2011 | Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws |
| ISO 1207:2011 | Slotted cheese head screws — Product grade A |
| ISO 14580:2011 | Hexalobular socket cheese head screws |
| BS EN ISO 1580:2011 | Slotted pan head screws. Product grade A |
| BS EN ISO 8742:1998 | Grooved pins. One-third-length centre grooved |
| BS EN ISO 4017:2014 | Fasteners. Hexagon head screws. Product grades A and B |
| ISO 10513:2012 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread — Property classes 8, 10 and 12 |
| ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B |
| ISO 1580:2011 | Slotted pan head screws — Product grade A |
| ISO 8735:1997 | Parallel pins with internal thread, of hardened steel and martensitic stainless steel |
| ISO 14583:2011 | Hexalobular socket pan head screws |
| ISO 4519:1980 | Electrodeposited metallic coatings and related finishes — Sampling procedures for inspection by attributes |
| ISO 15974:2000 | Closed end blind rivets with break pull mandrel and countersunk head — AlA/St |
| BS EN ISO 6157-2:2004 | Fasteners. Surface discontinuities Nuts |
| BS EN ISO 14583:2011 | Hexalobular socket pan head screws |
| ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10 |
| ISO 15976:2002 | Closed end blind rivets with break pull mandrel and protruding head — St/St |
| BS EN ISO 8751:2007 | Spring-type straight pins. Coiled, light duty |
| ISO 15978:2002 | Open end blind rivets with break pull mandrel and countersunk head — AIA/St |
| ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B |
| ISO 7089:2000 | Plain washers — Normal series — Product grade A |
| BS EN 14399-4:2005 | High-strength structural bolting assemblies for preloading System HV. Hexagon bolt and nut assemblies |
| ISO 16584:2002 | Open end blind rivets with break pull mandrel and protruding head — NiCu/St or NiCu/SSt |
| ISO 4026:2003 | Hexagon socket set screws with flat point |
| ISO 1479:2011 | Hexagon head tapping screws |
| ISO 4018:2011 | Hexagon head screws — Product grade C |
| ISO 10512:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread — Property classes 6, 8 and 10 |
| BS EN ISO 8741:1998 | Grooved pins. Half-length reverse-taper grooved |
| ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread — Product grades A and B |
| ISO 7047:2011 | Raised countersunk head screws (common head style) with type H or type Z cross recess — Product grade A |
| BS EN ISO 13337:2009 | Spring-type straight pins. Slotted, light duty |
| BS EN ISO 14580:2011 | Hexalobular socket cheese head screws |
| ISO 15983:2002 | Open end blind rivets with break pull mandrel and protruding head — A2/A2 |
| I.S. EN ISO 15480:1999 | HEXAGON WASHER HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD |
| ISO 4027:2003 | Hexagon socket set screws with cone point |
| BS EN ISO 8746:1998 | Grooved pins with round head |
| BS EN ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread. Product grades A and B |
| DIN EN ISO 4026:2004-05 | Hexagon socket set screws with flat point (ISO 4026:2003); German version EN ISO 4026:2003 |
| DIN EN ISO 14579:2011-06 | Hexalobular socket head cap screws (ISO 14579:2011) |
| DIN EN ISO 4028:2004-05 | Hexagon socket set screws with dog point (ISO 4028:2003); German version EN ISO 4028:2003 |
| EN 1515-4:2009 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| EN ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012) |
| EN ISO 7089:2000 | Plain washers - Normal series - Product grade A (ISO 7089:2000) |
| EN 1664:1997 | Prevailing torque type all-metal hexagon nuts with flange (ISO 7044:1997, modified) |
| EN ISO 14584:2011 | Hexalobular socket raised countersunk head screws (ISO 14584:2011) |
| EN ISO 15480:1999 | Hexagon washer head drilling screws with tapping screw thread (ISO 15480:1999) |
| EN ISO 15982:2002 | Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA (ISO 15982:2002) |
| EN 24035 : 1991 | HEXAGON THIN NUTS (CHAMFERED) - PRODUCT GRADES A AND B |
| EN ISO 7045:2011 | Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011) |
| EN ISO 7093-2:2000 | Plain washers - Large series - Part 2: Product grade C (ISO 7093-2:2000) |
| EN ISO 7042:2012 | Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012) |
| EN ISO 8734:1997 | Parallel pins, or hardened steel or martensitic stainless steel (Dowel pins) (ISO 8734:1997) |
| EN ISO 15482:1999 | Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999) |
| EN ISO 8752:2009 | Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009) |
| EN ISO 7091:2000 | Plain washers - Normal series - Product grade C (ISO 7091:2000) |
| EN ISO 1207:2011 | Slotted cheese head screws - Product grade A (ISO 1207:2011) |
| EN ISO 16585:2002 | Closed end blind rivets with pull mandrel and protruding head - A2/SSt (ISO 16585:2002) |
| EN ISO 15483:1999 | Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999) |
| EN ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012) |
| EN ISO 15976:2002 | Closed end blind rivets with break pull mandrel and protrudiing head - St/St (ISO 15976:2002) |
| EN ISO 14580:2011 | Hexalobular socket cheese head screws (ISO 14580:2011) |
| EN ISO 21670:2014 | Fasteners - Hexagon weld nuts with flange (ISO 21670:2014) |
| EN ISO 7046-1:2011 | Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel screws of property class 4.8 (ISO 7046-1:2011) |
| EN ISO 15977:2002 | Open end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15977:2002) |
| EN ISO 8735:1997 | Parallel pins with internal thread, of hardened steel or martensitic stainless steel (ISO 8735:1997) |
| EN ISO 16582:2002 | Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002) |
| EN ISO 10673:2009 | Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009) |
| EN ISO 7380:2004 | Hexagon socket button head screws (ISO 7380:2004) |
| EN ISO 1482:2011 | Slotted countersunk (flat) head tapping screws (ISO 1482:2011) |
| EN 14399-9:2018 | High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies |
| EN ISO 15481:1999 | Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999) |
| EN ISO 4519:2016 | Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes (ISO 4519:1980) |
| EN 1663:1997 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified) |
| EN ISO 1580:2011 | Slotted pan head screws - Product grade A (ISO 1580:2011) |
| EN ISO 15983:2002 | Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002) |
| EN ISO 15979:2002 | Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002) |
| EN 28733 : 1992 | PARALLEL PINS WITH INTERNAL THREAD, UNHARDENED |
| EN ISO 14582:2013 | Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013) |
| EN 26157-3:1991 | Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988) |
| EN ISO 4762:2004 | Hexagon socket head cap screws (ISO 4762:2004, Corrected version 2024-08) |
| EN 28736:1992 | Taper pins with internal thread, unhardened (ISO 8736:1986) |
| EN 1661:1997 | Hexagon nuts with flange (ISO/DIS 4161:1996, modified) |
| EN 24034 : 1991 | HEXAGON NUTS - PRODUCT GRADE C |
| EN 22340:1992 | Clevis pins without head (ISO 2340:1986) |
| EN ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012) |
| EN ISO 8676:2011 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
| EN ISO 4018:2011 | Hexagon head screws - Product grade C (ISO 4018:2011) |
| EN ISO 10512:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012) |
| EN ISO 14579:2011 | Hexalobular socket head cap screws (ISO 14579:2011) |
| EN ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
| EN ISO 8751:2007 | Spring-type straight pins - Coiled, light duty (ISO 8751:2007) |
| EN ISO 4032:2012 | Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) |
| EN ISO 4766:2011 | Slotted set screws with flat point (ISO 4766:2011) |
| EN ISO 4033:2012 | Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012) |
| EN ISO 10669:1999 | Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999) |
| EN ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012) |
| EN 27434:1992 | Slotted set screws with cone point (ISO 7434:1983) |
| EN ISO 7090:2000 | Plain washers, chamfered - Normal series - Product grade A (ISO 7090:2000) |
| EN ISO 7046-2:2011 | Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011) |
| EN ISO 8733:1997 | Parallel pins with internal thread, of unhardened steel or austenitic stainless steel (ISO 8733:1997) |
| EN ISO 7092:2000 | Plain washers - Small series - Product grade A (ISO 7092:2000) |
| EN ISO 7047:2011 | Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011) |
| EN ISO 7093-1:2000 | Plain washers - Large series - Part 1: Product grade A (ISO 7093-1:2000) |
| EN 28737:1992 | Taper pins with external thread, unhardened (ISO 8737:1986) |
| EN ISO 7380-1:2011 | Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) |
| EN ISO 8743:1997 | Grooved pins - Half-length centre grooved (ISO 8743:1997) |
| EN 14218:2003 | Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified) |
| EN ISO 15978:2002 | Open end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15978:2002) |
| EN ISO 2010:2011 | Slotted raised countersunk head screws - Product grade A (ISO 2010:2011) |
| EN 14399-5:2015 | High-strength structural bolting assemblies for preloading - Part 5: Plain washers |
| EN ISO 8745:1997 | Grooved pins - Half-length taper grooved (ISO 8745:1997) |
| EN ISO 15981:2002 | Open end blind rivets with break pull mandrel and protruding head - AIA/AIA (ISO 15981:2002) |
| EN 22338:1992/AC:1992 | PARALLEL PINS, UNHARDENED |
| EN ISO 8750:2007 | Spring-type straight pins - Coiled, standard duty (ISO 8750:2007) |
| EN ISO 8741:1997 | Grooved pins - Half-length reverse taper grooved (ISO 8741:1997) |
| EN 14399-4:2015 | High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies |
| EN ISO 14581:2013 | Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013) |
| EN ISO 7380-2:2011 | Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011) |
| EN ISO 15984:2002 | Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002) |
| EN ISO 1483:2011 | Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011) |
| EN 26157-1:1991 | Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988) |
| EN 1667:1997 | Prevailing torque type all-metal hexagon nuts with flange metric fine pitch thread (ISO 12126:1997, modified) |
| EN ISO 4027:2003 | Hexagon socket set screws with cone point (ISO 4027:2003) |
| EN ISO 16584:2002 | Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt (ISO 16584:2002) |
| EN ISO 6157-2:2004 | Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995) |
| EN ISO 1479:2011 | Hexagon head tapping screws (ISO 1479:2011) |
| EN ISO 7051:2011 | Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011) |
| EN ISO 4026:2003 | Hexagon socket set screws with flat point (ISO 4026:2003) |
| EN 493 : 1992 | FASTENERS - SURFACE DISCONTINUITIES - NUTS |
| EN ISO 8740:1997 | Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997) |
| EN 27435:1992 | Slotted set screws with long dog point (ISO 7435:1983) |
| EN ISO 13337:2009 | Spring-type straight pins - Slotted, light duty (ISO 13337:2009) |
| EN ISO 2342:2003 | Slotted headless screws with shank (ISO 2342:2003) |
| EN 28738:1992 | Plain washers for clevis pins - Product grade A (ISO 8738:1986) |
| EN 22341:1992 | Clevis pins with head (ISO 2341:1986) |
| EN ISO 2338:1997 | Parallel pins, of unhardened steel and austenitic stainless steel (ISO 2338:1997) |
| EN ISO 1481:2011 | Slotted pan head tapping screws (ISO 1481:2011) |
| EN ISO 14585:2011 | Hexalobular socket pan head tapping screws (ISO 14585:2011) |
| EN ISO 12474:2010 | Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010) |
| EN ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012) |
| EN ISO 15974:2000 | Closed end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15974:2000) |
| EN ISO 15975:2002 | Closed end blind rivets with break pull mandrel and protrudiing head - AI/AIA (ISO 15975:2002) |
| EN ISO 4028:2003 | Hexagon socket set screws with dog point (ISO 4028:2003) |
| EN ISO 8742:1997 | Grooved pins - One-third-length centre grooved (ISO 8742:1997) |
| EN ISO 16426:2002 | Fasteners - Quality assurance system (ISO 16426:2002) |
| EN 27436:1992 | Slotted set screws with cup point (ISO 7436:1983) |
| EN ISO 10511:2012 | Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012) |
| EN 14399-3:2015 | High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies |
| EN ISO 14587:2011 | Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011) |
| EN ISO 21269:2004 | Hexagon socket head cap screws with metric fine pitch thread (ISO 21269:2004) |
| EN ISO 16583:2002 | Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002) |
| EN ISO 8747:1997 | Grooved pins with countersunk head (ISO 8747:1997) |
| EN ISO 8746:1997 | Grooved pins with round head (ISO 8746:1997) |
| EN ISO 8744:1997 | Grooved pins - Full-length taper grooved (ISO 8744:1997) |
| EN 24032 : 1991 | HEXAGON NUTS, STYLE 1 - PRODUCT GRADES A AND B |
| EN ISO 2009:2011 | Slotted countersunk flat head screws - Product grade A (ISO 2009:2011) |
| EN ISO 7053:2011 | Hexagon washer head tapping screws (ISO 7053:2011) |
| EN ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012) |
| EN 24766:1992 | Slotted set screws with flat point (ISO 4766:1983) |
| EN ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012) |
| EN ISO 7050:2011 | Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011) |
| EN 22339:1992 | Taper pins, unhardened (ISO 2339:1986) |
| EN 14399-6:2015 | High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers |
| I.S. EN ISO 4026:2004 | HEXAGON SOCKET SET SCREWS WITH FLAT POINT |
| I.S. EN ISO 4028:2004 | HEXAGON SOCKET SET SCREWS WITH DOG POINT |
| BS 7046(1989) : AMD 7487 | SPECIFICATION FOR FULL-LENGTH PARALLEL GROOVED PINS, WITH CHAMFER |
| DIN EN ISO 14582:2014-02 | FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013) |
| BS 4219-4:1985 | Slotted set screws: metric series Specification for slotted set screws with cup point |
| BS EN 16983:2016 | Disc springs. Quality specifications. Dimensions |
| BS EN ISO 4766:2011 | Slotted set screws with flat point |
| I.S. EN ISO 7380:2004 | HEXAGON SOCKET BUTTON HEAD SCREWS |
| BS 7053(1989) : AMD 7494 | SPECIFICATION FOR COUNTERSUNK HEAD GROOVED PINS |
| I.S. EN 24766:1993 | SLOTTED SET SCREWS WITH FLAT POINT |
| 11/30239640 DC : 0 | BS ISO 10509 - HEXAGON FLANGE HEAD TAPPING SCREWS |
| 15/30332545 DC : 0 | BS EN 14399-7 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| I.S. EN ISO 6157-2:2004 | FASTENERS - SURFACE DISCONTINUITIES - PART 2: NUTS |
| I.S. EN ISO 8746:1998 | GROOVED PINS WITH ROUND HEAD |
| BS ISO 10509:2012 | Hexagon flange head tapping screws |
| BS EN 14399-8:2007 | High-strength structural bolting assemblies for preloading System HV. Hexagon fit bolt and nut assemblies |
| BS 7048(1989) : AMD 7489 | SPECIFICATION FOR THIRD-LENGTH CENTRE GROOVED PINS |
| 16/30337569 DC : 0 | BS EN ISO 4034 - HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C |
| 16/30337573 DC : DRAFT APR 2016 | BS EN ISO 4035 - HEXAGON THIN NUTS (STYLE 0), CHAMFERED - PRODUCT GRADES A AND B |
| BS EN ISO 14581:2013 | Fasteners. Hexalobular socket countersunk flat head screws |
| 02/707699 DC : DRAFT JUN 2002 | ISO/DIS 21670 - HEXAGON WELD NUTS WITH FLANGE |
| 09/30208227 DC : 0 | BS ISO 1482 - SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| NF EN ISO 7380-1 : 2011 | BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS |
| DIN EN 1515-4:2010-04 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| 09/30208245 DC : 0 | BS ISO 7051 - CROSS RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| 15/30332554 DC : 0 | BS EN 14399-9 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| DIN ISO 1482:1990-08 | SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS (COMMON HEAD STYLE) |
| BS 7060(1991) : AMD 7974 | SPECIFICATION FOR SLOTTED SPRING-TYPE STRAIGHT PINS |
| BS ISO 8992:2005 | Fasteners. General requirements for bolts, screws, studs and nuts |
| BS ISO 4161:2012 | Hexagon nuts with flange, style 2. Coarse thread |
| ISO 12126:2012 | Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 — Product grades A and B |
| 05/30127446 DC : DRAFT JAN 2005 | ISO 13584-511 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PARTS LIBRARY - PART 511: MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE - REFERENCE DICTIONARY FOR FASTENERS |
| DIN EN ISO 7053:2011-11 | HEXAGON WASHER HEAD TAPPING SCREWS (ISO 7053:2011) |
| PREN 14399-7 : DRAFT 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| I.S. EN ISO 4766:2011 | SLOTTED SET SCREWS WITH FLAT POINT |
| I.S. EN 14399-7:2007 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| BS EN 14399-9:2009 | High strength structural bolting for preloading System HR or HV. Direct tension indicators for bolt and nut assemblies |
| DIN EN 14399-7:2016-01 (Draft) | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| I.S. EN ISO 10683:2014 | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| ISO 10683:2014 | Fasteners — Non-electrolytically applied zinc flake coatings |
| I.S. EN 14399-8:2007 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| I.S. EN 14399-9:2009 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| DIN EN 14399-5:2015-04 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 5: PLAIN WASHERS |
| DIN EN 14399-4:2015-04 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES |
| DIN EN ISO 10511:2016-05 (Draft) | PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT) (ISO 10511:2012) |
| DIN EN ISO 1207:2011-10 | Slotted cheese head screws - Product grade A (ISO 1207:2011) |
| DIN EN ISO 10513:2016-05 (Draft) | PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12 (ISO 10513:2012) |
| DIN EN 24015:1991-12 | Hexagon head bolts with reduced shank (shank diameter pitch diameter); product grade B (ISO 4015:1979) |
| DIN EN 14399-6:2015-04 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 6: PLAIN CHAMFERED WASHERS |
| DIN EN ISO 4033:2016-05 (Draft) | HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012) |
| ISO 10669:1999 | Plain washers for tapping screw and washer assemblies — Normal and large series — Product grade A |
| BS EN ISO 16582:2002 | Open end blind rivets with break pull mandrel and protruding head. Cu/St or Cu/Br or Cu/SSt |
| BS EN ISO 4034:2012 | Hexagon regular nuts (style 1). Product grade C |
| ISO 1481:2011 | Slotted pan head tapping screws |
| BS EN 24766:1992 | Slotted set screws with flat point |
| ISO 14584:2011 | Hexalobular socket raised countersunk head screws |
| BS EN ISO 15984:2002 | Open end blind rivets with break pull mandrel and countersunk head. A2/A2 |
| BS EN 22340:1992 | Clevis pins without head |
| BS EN 28737:1992 | Taper pins with external thread, unhardened |
| BS EN ISO 7046-1:2011 | Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A Steel of property class 4.8 |
| ISO 2010:2011 | Slotted raised countersunk head screws — Product grade A |
| BS EN ISO 1234:1998 | Split pins |
| BS EN ISO 16584:2002 | Open end blind rivets with break pull mandrel and protruding head. NiCu/St or NiCu/SSt |
| BS EN ISO 15979:2002 | Open end blind rivets with break pull mandrel and protruding head. St/St |
| BS EN 28736:1992 | Taper pins with internal thread, unhardened |
| ISO 2338:1997 | Parallel pins, of unhardened steel and austenitic stainless steel |
| BS EN ISO 2009:2011 | Slotted countersunk flat head screws. Product grade A |
| ISO 8751:2007 | Spring-type straight pins — Coiled, light duty |
| ISO 15481:1999 | Cross recessed pan head drilling screws with tapping screw thread |
| BS EN 1667:1998 | Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread |
| ISO 15977:2002 | Open end blind rivets with break pull mandrel and protruding head — AIA/St |
| BS EN ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread. Product grades A and B |
| BS EN ISO 2010:2011 | Slotted raised countersunk head screws. Product grade A |
| BS EN ISO 8747:1998 | Grooved pins with countersunk head |
| ISO 21670:2014 | Fasteners — Hexagon weld nuts with flange |
| BS EN ISO 4026:2003 | Hexagon socket set screws with flat point |
| BS EN ISO 2338:1998 | Parallel pins of unhardened steel and austenitic stainless steel |
| BS EN 1666:1998 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread |
| BS EN ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert). Property classes 5, 8 and 10 |
| ISO 14582:2013 | Fasteners — Hexalobular socket countersunk head screws, high head |
| ISO 8739:1997 | Grooved pins — Full-length parallel grooved, with pilot |
| ISO 15984:2002 | Open end blind rivets with break pull mandrel and countersunk head — A2/A2 |
| ISO 1234:1997 | Split pins |
| BS EN ISO 15975:2002 | Closed end blind rivets with break pull mandrel and protruding head. AI/AIA |
| DIN EN ISO 4016:2011-06 | Hexagon head bolts - Product grade C (ISO 4016:2011) |
| DIN EN 14218:2003-09 | HEXAGON NUTS WITH FLANGE - FINE PITCH THREAD |
| DIN EN ISO 15984:2003-04 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD - A2/A2 |
| DIN EN ISO 8748:2007-07 | Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007) |
| DIN EN ISO 14583:2011-06 | Hexalobular socket pan head screws (ISO 14583:2011) |
| DIN EN ISO 15975:2003-04 | CLOSED END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD - AL/ALA |
| DIN EN 493:1992-07 | FASTENERS - SURFACE DISCONTINUITIES - NUTS |
| DIN EN ISO 21670:2004-01 | FASTENERS - HEXAGON WELD NUTS WITH FLANGE (ISO 21670:2014) |
| DIN EN ISO 15981:2003-04 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD - ALA/ALA |
| DIN EN ISO 21269:2004-06 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| DIN EN ISO 2342:2004-05 | Slotted headless screws with shank (ISO 2342:2003); German version EN ISO 2342:2003 |
| DIN EN ISO 8751:2007-07 | Spring-type straight pins - Coiled, light duty (ISO 8751:2007) |
| DIN EN ISO 15978:2003-04 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD - ALA/ST |
| DIN EN ISO 4036:2013-04 | HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B (ISO 4036:2012) |
| DIN EN ISO 4014:2011-06 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| DIN EN ISO 15979:2003-04 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD - ST/ST |
| DIN EN ISO 15980:2003-04 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD - ST/ST |
| DIN EN ISO 14580:2011-06 | Hexalobular socket cheese head screws (ISO 14580:2011) |
| DIN EN ISO 15982:2003-04 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD - ALA/ALA |
| DIN EN ISO 15976:2003-04 | Closed end blind rivets with break pull mandrel and protruding head - St/St (ISO 15976:2002); German version EN ISO 15976:2002 |
| DIN EN ISO 13337:2009-10 | SPRING-TYPE STRAIGHT PINS, SLOTTED, LIGHT DUTY |
| DIN EN ISO 15977:2011-02 | Open end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15977:2002) |
| DIN EN ISO 4018:2011-07 | Hexagon head screws - Product grade C (ISO 4018:2011) |
| UNE-EN ISO 12474:2011 | Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010) |
| I.S. EN 1662:1998 | HEXAGON BOLTS WITH FLANGE - SMALL SERIES |
| I.S. EN 1665:1998 | HEXAGON BOLTS WITH FLANGE - HEAVY SERIES |
| I.S. EN 1661:1998 | HEXAGON NUTS, WITH FLANGE |
| UNE-EN 14399-5:2016 | High-strength structural bolting assemblies for preloading - Part 5: Plain washers |
| UNE-EN ISO 7380-1:2012 | Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) |
| UNE-EN ISO 7050:2011 | Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011) |
| UNE-EN ISO 4035:2013 | Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012) |
| UNE-EN ISO 10511:2013 | Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012) |
| UNE-EN ISO 7042:2013 | Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012) |
| UNE-EN ISO 4033:2013 | Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012) |
| UNE-EN ISO 4016:2011 | Hexagon head bolts - Product grade C (ISO 4016:2011) |
| UNE-EN ISO 8675:2013 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012) |
| UNE-EN ISO 21670:2015 | Fasteners - Hexagon weld nuts with flange (ISO 21670:2014) |
| UNE-EN ISO 14581:2016 | Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013) |
| UNE-EN ISO 4017:2015 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
| UNE-EN ISO 8676:2011 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
| UNE-EN ISO 8673:2013 | Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012) |
| UNE-EN 1515-4:2010 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| UNE-EN ISO 7047:2012 | Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011) |
| UNE-EN ISO 4036:2013 | Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012) |
| UNE-EN ISO 7040:2013 | Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012) |
| UNE-EN ISO 14587:2011 | Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011) |
| UNE-EN ISO 1482:2011 | Slotted countersunk (flat) head tapping screws (ISO 1482:2011) |
| UNE-EN ISO 7048:2011 | Cross-recessed cheese head screws (ISO 7048:2011) |
| UNE-EN ISO 14584:2011 | Hexalobular socket raised countersunk head screws (ISO 14584:2011) |
| UNE-EN ISO 4032:2013 | Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) |
| UNE-EN 14399-3:2016 | High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies |
| UNE-EN ISO 7046-2:2012 | Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011) |
| UNE-EN ISO 7053:2011 | Hexagon washer head tapping screws (ISO 7053:2011) |
| UNE-EN ISO 2010:2012 | Slotted raised countersunk head screws - Product grade A (ISO 2010:2011) |
| UNE-EN ISO 14586:2011 | Hexalobular socket countersunk head tapping screws (ISO 14586:2011) |
| UNE-EN ISO 7046-1:2012 | Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel of property class 4.8 (ISO 7046-1:2011) |
| UNE-EN ISO 4519:2016 | Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes (ISO 4519:1980) |
| UNE-EN ISO 14583:2011 | Hexalobular socket pan head screws (ISO 14583:2011) |
| UNE-EN ISO 8674:2013 | Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012) |
| UNE-EN ISO 7049:2011 | Cross-recessed pan head tapping screws (ISO 7049:2011) |
| UNE-EN ISO 1483:2011 | Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011) |
| UNE-EN ISO 1580:2012 | Slotted pan head screws - Product grade A (ISO 1580:2011) |
| UNE-EN 14399-6:2016 | High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers |
| UNE-EN ISO 7051:2011 | Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011) |
| UNE-EN ISO 14580:2011 | Hexalobular socket cheese head screws (ISO 14580:2011) |
| UNE-EN ISO 2009:2012 | Slotted countersunk flat head screws - Product grade A (ISO 2009:2011) |
| UNE-EN ISO 4018:2011 | Hexagon head screws - Product grade C (ISO 4018:2011) |
| UNE-EN ISO 4766:2012 | Slotted set screws with flat point (ISO 4766:2011) |
| UNE-EN ISO 7045:2012 | Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011) |
| UNE-EN ISO 10673:2010 | Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A (ISO 10673:2009) |
| UNE-EN ISO 4014:2011 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| UNE-EN ISO 7380-2:2012 | Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011) |
| UNE-EN ISO 1207:2011 | Slotted cheese head screws - Product grade A (ISO 1207:2011) |
| UNE-EN ISO 10683:2015 | Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014) |
| UNE-EN ISO 8752:2010 | Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009) |
| UNE-EN ISO 10512:2013 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012) |
| UNE-EN ISO 4034:2013 | Hexagon regular nuts (style 1) - Product grade C (ISO 4034:2012) |
| UNE-EN ISO 1481:2011 | Slotted pan head tapping screws (ISO 1481:2011) |
| UNE-EN 14399-4:2016 | High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies |
| UNE-EN ISO 10513:2013 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012) |
| UNE-EN ISO 14585:2011 | Hexalobular socket pan head tapping screws (ISO 14585:2011) |
| UNE-EN ISO 1479:2011 | Hexagon head tapping screws (ISO 1479:2011) |
| UNE-EN ISO 13337:2010 | Spring-type straight pins. Slotted, light duty (ISO 13337:2009) |
| UNE-EN ISO 7719:2013 | Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012) |
| UNE-EN ISO 14579:2011 | Hexalobular socket head cap screws (ISO 14579:2011) |
| UNE-EN ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
| I.S. EN ISO 4029:2004 | HEXAGON SOCKET SET SCREWS WITH CUP POINT |
| I.S. EN ISO 4027:2004 | HEXAGON SOCKET SET SCREWS WITH CONE POINT |
| ISO 8839:1986 | Mechanical properties of fasteners — Bolts, screws, studs and nuts made of non-ferrous metals |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| ISO 10683:2014 | Fasteners — Non-electrolytically applied zinc flake coatings |
| ISO 4759-3:2016 | Tolerances for fasteners — Part 3: Washers for bolts, screws and nuts — Product grades A, C and F |
| ISO 4042:1999 | Fasteners — Electroplated coatings |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs |
| ISO 6157-3:1988 | Fasteners — Surface discontinuities — Part 3: Bolts, screws and studs for special requirements |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 6157-1:1988 | Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements |
| ISO 2320:2015 | Fasteners — Prevailing torque steel nuts — Functional properties |
| ISO 7085:1999 | Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
| ISO 1502:1996 | ISO general-purpose metric screw threads — Gauges and gauging |
| ISO 898-6:1994 | Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread |
| ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners with specified hardness classes — Coarse thread and fine pitch thread |
| ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress |
| ISO 6157-2:1995 | Fasteners — Surface discontinuities — Part 2: Nuts |
| ISO 2702:2011 | Heat-treated steel tapping screws — Mechanical properties |
| ISO 1478:1999 | Tapping screws thread |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.