ISO 3506-2:2009
Withdrawn
Withdrawn
View Superseded by
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
10-29-2009
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO 3506-2:2009 specifies the mechanical properties of nuts made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested over an ambient temperature range of 10 °C to 35 °C. Properties vary at higher or lower temperatures.
ISO 3506-2:2009 applies to nuts:
- with nominal thread diameter d ≤ 39 mm;
- of triangular ISO metric threads with diameters and pitches in accordance with ISO 68-1, ISO 261 and ISO 262;
- of any shape;
- with width across flats as specified in ISO 272;
- with nominal heights m ≥ 0,5 d.
It does not apply to nuts requiring properties, such as locking abilities and weldability.
| Committee |
ISO/TC 2
|
| DevelopmentNote |
Supersedes ISO 3506 (04/2001) DRAFT ISO/DIS 3506-2 is also available for this standard. (11/2017)
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| GOST ISO 3506-2 : 2014 | Identical |
| NF EN ISO 3506-2 : 2010 | Identical |
| NBN EN ISO 3506-2 : 2010 | Identical |
| NEN EN ISO 3506-2 : 2009 | Identical |
| NS EN ISO 3506-2 : 2009 | Identical |
| I.S. EN ISO 3506-2:2009 | Identical |
| PN EN ISO 3506-2 : 2009 | Identical |
| SS-EN ISO 3506-2 : 2009 | Identical |
| BS EN ISO 3506-2:2009 | Identical |
| EN ISO 3506-2:2009 | Identical |
| DIN EN ISO 3506-2:2010-04 | Identical |
| JIS B 1054-2:2013 | Identical |
| GOST R ISO 3506-2 : 2009 | Identical |
| IS 1367 : Part 14 : Sec 2 : 2018 | Identical |
| UNE-EN ISO 3506-2:2010 | Identical |
| 07/30159562 DC : 0 | BS EN ISO 13628-1 AMD1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| 12/30254917 DC : DRAFT JAN 2012 | BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| 16/30341810 DC : 0 | BS EN 60335-2-99 ED 1.0/A1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS |
| 16/30341790 DC : 0 | BS EN 60335-2-47 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS |
| 16/30337587 DC | BS EN ISO 7042. Prevailing torque (all-metal) hexagon high nuts. Product grades A and B |
| 16/30337622 DC : DRAFT MAR 2016 | BS EN ISO 8674 - HEXAGON HIGH NUTS (STYLE 2), WITH FINE PITCH THREAD - PRODUCT GRADES A AND B |
| DIN EN 124-6:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| BS EN 1090-5:2017 | Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| 10/30234610 DC : DRAFT NOV 2010 | BS EN 14420-3 - HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| 10/30227442 DC : 0 | BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS |
| 08/30187521 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES |
| I.S. EN 1515-4:2009 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| API 674 : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| 13/30286967 DC : 0 | BS EN 1992-4 - EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| EN 15048-1:2016 | Non-preloaded structural bolting assemblies - Part 1: General requirements |
| IEC 60335-2-37:2017 | Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers |
| I.S. EN 13480-2:2017 | METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS |
| I.S. EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
| BS EN 13480-2:2017 | Metallic industrial piping Materials |
| BS EN ISO 13628-1 : 2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| BS EN ISO 4032:2012 | Hexagon regular nuts (style 1). Product grades A and B |
| BS EN 14218:2003 | Hexagon nuts with flange. Fine pitch thread |
| ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B |
| BS EN 14420-3:2013 | Hose fittings with clamp units Clamp units, bolted or pinned |
| EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| DIN EN 1090-5:2017-07 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| DIN EN ISO 16048:2003-06 | PASSIVATION OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 12693:2008 | Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
| EN 12255-1:2002 | Wastewater treatment plants - Part 1: General construction principles |
| EN 14423:2013+A1:2016 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| 16/30337618 DC : 0 | BS EN ISO 8675 - HEXAGON THIN NUTS (STYLE 0) CHAMFERED, WITH FINE PITCH THREAD - PRODUCT GRADES A AND B |
| 16/30337626 DC : 0 | BS EN ISO 8673 - HEXAGON REGULAR NUTS (STYLE 1), WITH FINE PITCH THREAD - PRODUCT GRADES A AND B |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 12693:2008 | Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors |
| API 674 : 2010 : ERR 1 : 2014 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| I.S. EN 15048-1:2016 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 124-6:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| BS EN 13445-2 : 2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| IEC 60335-2-64:2002+AMD1:2007+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN ISO 8675:2016-05 (Draft) | HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012) |
| DIN EN ISO 8673:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012) |
| BS EN ISO 13709:2003 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| BS EN 15048-1:2007 | Non-preloaded structural bolting assemblies General requirements |
| I.S. EN ISO 4032:2012 | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012) |
| I.S. EN ISO 8673:2012 | HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012) |
| DIN EN 14420-3:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN ISO 8675:2012 | HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012) |
| I.S. EN ISO 13628-1:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| I.S. EN 15048-2:2016 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| I.S. EN 14420-3:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| I.S. EN ISO 4035:2012 | HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B (ISO 4035:2012) |
| KTA 3507 : 2014(R2017) | FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM |
| KTA 3702 : 2014(R2017) | EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS |
| IEC 60335-2-36:2017 | Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements |
| 18/30351048 DC : 0 | BS ISO 3506-6 - MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 6: GUIDANCE FOR THE SELECTION OF STAINLESS STEELS AND NICKEL ALLOYS FOR FASTENERS |
| I.S. EN ISO 16228:2018 | FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017) |
| 16/30341798 DC : 0 | BS EN 60335-2-49 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-49: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC APPLIANCES FOR KEEPING FOOD AND CROCKERY WARM |
| API 682 : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| API 674 REDLINE : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| 16/30337584 DC : 0 | BS ISO 7041 - PREVAILING TORQUE HEXAGON HIGH NUTS (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B |
| DIN ISO 8992:2005-09 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
| 15/30280562 DC : 0 | BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS |
| 16/30337580 DC : 0 | BS EN ISO 7040 - PREVAILING TORQUE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B |
| API 674 : 2010 : INC : ERR 1 : 2015 : R2016 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| EN ISO 16228:2018 | Fasteners - Types of inspection documents (ISO 16228:2017) |
| ISO 10663:2012 | Hexagon nuts with flange, style 2 — Fine pitch thread |
| ISO 15398:2012 | Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 14423:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| BS EN ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread. Product grades A and B |
| IEC 60335-2-50:2002+AMD1:2007+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie |
| IEC 60335-2-48:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters |
| EN ISO 3269:2000 | Fasteners - Acceptance inspection (ISO 3269:2000) |
| 11/30245512 DC : 0 | BS ISO 15398 - SPECIFICATIONS FOR THERMOPLASTICS COVERS AND FRAMES FOR MANHOLES AND INSPECTION CHAMBERS USED IN NON-TRAFFIC AREAS |
| ISO 16228:2017 | Fasteners — Types of inspection documents |
| BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
| BS ISO 15398:2012 | Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas |
| 16/30337630 DC | BS EN ISO 7719. Prevailing torque (all-metal) hexagon regular nuts. Product grades A and B |
| 09/30188143 DC : DRAFT OCT 2009 | BS EN 13480-2:2002/A2 - METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS |
| 15/30280509 DC : 0 | BS EN ISO 1891-4 - FASTENERS - TERMINOLOGY - PART 4: CONTROLS, INSPECTION, DELIVERY, ACCEPTANCE AND QUALITY |
| 16/30339483 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| 16/30341794 DC : 0 | BS EN 60335-2-48 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRILLERS AND TOASTERS |
| BS EN 1515-4:2009 | Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| BS ISO 10663:2012 | Hexagon nuts with flange, style 2. Fine pitch thread |
| I.S. EN 593:2017 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| PREN 593 : DRAFT 2016 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| PREN 14592 : DRAFT 2017 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| 10/30214867 DC : 0 | BS EN ISO 21049 - PUMPS - SHAFT-SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| 10/30234634 DC : 0 | BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| I.S. EN 13445-2:2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
| API 674 : 2010(R2016) | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| 04/30123693 DC : DRAFT OCT 2004 | EN 15048-1 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| API 682 CHINESE : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API 610 REDLINE : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API 674 : 2010 : ERR 2 : 2015 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| BS EN ISO 16228:2018 | Fasteners. Types of inspection documents |
| I.S. EN 12693:2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| ISO 4161:2012 | Hexagon nuts with flange, style 2 — Coarse thread |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| DIN EN 12693:2016-10 (Draft) | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| PREN 1992-4 : DRAFT 2013 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE |
| IEC 60335-2-39:2012+AMD1:2017 CSV | Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans |
| BS EN 13480-2:2017+A3:2018 | Metallic industrial piping Materials |
| DIN EN ISO 4032:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012) |
| I.S. EN ISO 13709:2009 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| DIN EN 15048-1:2016-09 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| DIN EN 15048-2:2016-09 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| BS EN 1661:1998 | Hexagon nuts with flange |
| BS EN 12284:2003 | Refrigerating systems and heat pumps. Valves. Requirements, testing and marking |
| BS EN ISO 3269:2001 | Fasteners. Acceptance inspection |
| ISO 3269:2000 | Fasteners — Acceptance inspection |
| ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) — Product grades A and B |
| ISO 13628-1:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
| IEC 60335-2-47:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans |
| BS EN ISO 4035:2012 | Hexagon thin nuts chamfered (style 0). Product grades A and B |
| BS EN ISO 16048:2003 | Passivation of corrosion-resistant stainless-steel fasteners |
| ISO 13710:2004 | Petroleum, petrochemical and natural gas industries — Reciprocating positive displacement pumps |
| BS EN 15048-2:2007 | Non-preloaded structural bolting assemblies Suitability test |
| IEC 60335-2-42:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens |
| IEC 60335-2-99:2003+AMD1:2017 CSV | Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods |
| IEC 60335-2-49:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm |
| BS EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps |
| ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
| IEC 61518:2001 | Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa) |
| IEC 60335-2-38:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills |
| BS EN 12255-1:2002 | Wastewater treatment plants General construction principles |
| EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
| BS EN 1515-1:2000 | Flanges and their joints. Bolting Selection of bolting |
| ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B |
| EN 1515-4:2009 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| EN ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012) |
| EN 1515-1:1999 | Flanges and their joints - Bolting - Part 1: Selection of bolting |
| EN ISO 16048:2003 | Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003) |
| EN 1661:1997 | Hexagon nuts with flange (ISO/DIS 4161:1996, modified) |
| EN ISO 4032:2012 | Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) |
| EN ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012) |
| EN 15048-2:2016 | Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
| EN 14218:2003 | Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified) |
| EN ISO 21049:2004 | Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004) |
| EN 593:2017 | Industrial valves - Metallic butterfly valves for general purposes |
| EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004) |
| EN ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012) |
| EN 14420-3:2013 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| PREN 14420-3 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 08/30193145 DC : 0 | BS EN ISO 13628-1:2005/AMD 1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| BS EN 593:2017 | Industrial valves. Metallic butterfly valves for general purposes |
| 16/30337573 DC : DRAFT APR 2016 | BS EN ISO 4035 - HEXAGON THIN NUTS (STYLE 0), CHAMFERED - PRODUCT GRADES A AND B |
| BS EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| DIN EN 1515-4:2010-04 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| DIN 19558:2002-12 | WASTEWATER TREATMENT PLANTS - OUTLET INSTALLATIONS, WEIR AND SCUM BAFFLE, SUBMERGED EFFLUENT PIPES IN TANKS - CONSTRUCTION PRINCIPLES, MAIN DIMENSIONS, LAYOUT |
| DIN 3016-2:2000-06 | FASTENING CLAMPS - PART 2: WITH FASTENING LUGS |
| BS ISO 8992:2005 | Fasteners. General requirements for bolts, screws, studs and nuts |
| BS ISO 4161:2012 | Hexagon nuts with flange, style 2. Coarse thread |
| KTA 3205.2 : 2015 COR 2016 | COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| I.S. EN 1090-5:2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| BS EN 14423:2013+A2:2019 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| ISO 21049:2004 | Pumps — Shaft sealing systems for centrifugal and rotary pumps |
| BS EN ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread. Product grades A and B |
| BS EN ISO 21049:2004 | Pumps. Shaft sealing systems for centrifugal and rotary pumps |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| DIN EN 12693:2008-09 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| DIN EN 14218:2003-09 | HEXAGON NUTS WITH FLANGE - FINE PITCH THREAD |
| EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| EN 12284:2003 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| UNE-EN 14423:2014 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| UNE-EN ISO 4035:2013 | Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012) |
| UNE-EN ISO 8675:2013 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012) |
| UNE-EN ISO 8673:2013 | Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012) |
| UNE-EN 15048-1:2018 | Non-preloaded structural bolting assemblies - Part 1: General requirements |
| UNE-EN 1515-4:2010 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| UNE-EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| UNE-EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| UNE-EN ISO 4032:2013 | Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) |
| UNE-EN 15048-2:2017 | Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| UNE-EN 14420-3:2014 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| UNE-EN 13445-2:2015 | Unfired pressure vessels - Part 2: Materials |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| KTA 3201.2 : 2013 | COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 2: DESIGN AND ANALYSIS |
| I.S. EN 12255-1:2002 | WASTEWATER TREATMENT PLANTS - PART 1: GENERAL CONSTRUCTION PRINCIPLES |
| ISO 272:1982 | Fasteners — Hexagon products — Widths across flats |
| ISO 6507-1:2005 | Metallic materials — Vickers hardness test — Part 1: Test method |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| ISO 6506-1:2014 | Metallic materials — Brinell hardness test — Part 1: Test method |
| ISO 683-13:1974 | Heat-treated steels, alloy steels and free-cutting steels — Part 13: Wrought stainless steels |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 16426:2002 | Fasteners — Quality assurance system |
| ISO 898-6:1994 | Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| ISO 68-1:1998 | ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| ISO 8044:2015 | Corrosion of metals and alloys — Basic terms and definitions |
| ISO 16048:2003 | Passivation of corrosion-resistant stainless-steel fasteners |
| ISO 3651-1:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| ISO 4954:1993 | Steels for cold heading and cold extruding |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.