• There are no items in your cart

ISO 4287:1997

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

12-20-2021

Published date

04-03-1997

Preview

DevelopmentNote
Supersedes ISO 4287-1 (04/2001)
DocumentType
Standard
Pages
25
PublisherName
International Organization for Standardization
Status
Superseded
SupersededBy
Supersedes

DIN ISO 16260:2016-10 (Draft) PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016)
I.S. EN ISO 15630-3:2010 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
DIN ISO 10110-8:2012-02 Optics and photonics - Preparation of drawings for optical elements and systems - Part 8: Surface texture; roughness and waviness (ISO 10110-8:2010)
BS EN 62444:2013 Cable glands for electrical installations
DIN EN ISO 16610-1 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015)
BS ISO 5781:2000 Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces
13/30270995 DC : 0 BS ISO/IEC 8484 - INFORMATION TECHNOLOGY - MAGNETIC STRIPES ON SAVINGSBOOKS
ISO/TS 17450-2:2002 Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties
07/30170832 DC : DRAFT AUG 2007 BS ISO 25178-602 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS
06/30157850 DC : 0 BS EN 13083 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
14/30303794 DC : 0 BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
BS ISO 12301:2007 Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics
ISO 9652-4:2000 Masonry Part 4: Test methods
06/30153650 DC : DRAFT JULY 2006 EN 61914 - CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
I.S. EN 10329:2006 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
PREN 438-2 : DRAFT 2014 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
BS ISO 14627:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method
ISO 11749:2014 Belt drive — V-ribbed belts for the automotive industry — Fatigue test
04/30098257 DC : DRAFT MAY 2004 EN ISO 6507-3 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS
I.S. EN 1071-3:2005 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 3: DETERMINATION OF ADHESION AND OTHER MECHANICAL FAILURE MODES BY A SCRATCH TEST
11/30173941 DC : 0 BS EN ISO 27509 - PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING
ISO 17440:2014 Cranes General design Limit states and proof of competence of forged steel hooks
02/712417 DC : DRAFT OCT 2002 PREN 10049 - MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS
12/30242502 DC : DRAFT MAR 2012 BS ISO 16525-3 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 3: DETERMINATION OF HEAT TRANSFER PROPERTIES
I.S. EN 12761-3:2001 AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS - ENVIRONMENTAL PROTECTION - PART 3: AIR-ASSISTED SPRAYERS FOR BUSH AND TREE CROPS
BS EN 61400-4:2013 Wind turbines Design requirements for wind turbine gea
11/30199166 DC : 0 BS ISO 11952 - SURFACE CHEMICAL ANALYSIS - SCANNING PROBE MICROSCOPY - DETERMINATION OF GEOMETRIC QUANTITIES USING SPM - CALIBRATION OF MEASURING SYSTEMS
BS ISO 6194-2:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Vocabulary
04/30074924 DC : DRAFT JUNE 2004 EN ISO 6508-3 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION AND REFERENCE BLOCKS (SCALES A, B, C, D, E, F, G, H, K, N, T)
I.S. EN 1724:1999 LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE COEFFICIENT OF FRICTION
09/30207175 DC : 0 BS EN 62276 - SINGLE CRYSTAL WAFERS FOR SURFACE ACOUSTIC WAVE (SAW) DEVICE APPLICATIONS - SPECIFICATIONS AND MEASURING METHOD
ISO 16525-3:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 3: Determination of heat-transfer properties
BS ISO 4211-2:2013 Furniture. Tests for surface finishes Assessment of resistance to wet heat
BS EN ISO 25178-701:2010 Geometrical product specifications (GPS). Surface texture. Areal Calibration and measurement standards for contact (stylus) instruments
13/30286407 DC : 0 BS ISO 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS
BS EN ISO 25178-604:2013 Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (coherence scanning interferometry) instruments
DIN EN ISO 15324:2008-07 Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test (ISO 15324:2000)
ISO 19477:2016 Metallic and other inorganic coatings Measurement of Young's modulus of thermal barrier coatings by beam bending
DD ISO/TS 16610-32:2009 Geometrical product specifications (GPS). Filtration Robust profile filters. Spline filters
BS EN ISO 12780-2:2011 Geometrical product specifications (GPS). Straightness Specification operators
I.S. EN 12761-2:2001 AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS - ENVIRONMENTAL PROTECTION - PART 2: FIELD CROP SPRAYERS
17/30302767 DC : 0 BS ISO 13779-2 - IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 2: THERMALLY SPRAYED COATINGS OF HYDROXYAPATITE
11/30243507 DC : 0 BS EN ISO 25178-70 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES
UNE-EN ISO 14644-9:2014 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)
05/30109548 DC : DRAFT JAN 2005 ISO 14880-4 - MICROLENS ARRAYS - PART 4: TEST METHODS FOR NON-OPTICAL PROPERTIES
05/30132854 DC : DRAFT APR 2005 EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
06/30145675 DC : DRAFT SEP 2006 ISO 12301 - PLAIN BEARINGS - QUALITY CONTROL TECHNIQUES AND INSPECTION OF GEOMETRICAL AND MATERIAL QUALITY CHARACTERISTICS
BS ISO 5599-2:2001 Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces with optional electrical connector
09/30201500 DC : 0 BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED AND COLD SIZED SQUARE AND RECTANGULAR TUBES
UNE-EN 16743:2016 Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements
10/30197641 DC : 0 BS ISO 7207-2 - IMPLANTS FOR SURGERY - COMPONENTS FOR PARTIAL AND TOTAL KNEE JOINT PROSTHESES - PART 2: ARTICULATING SURFACES MADE OF METAL, CERAMIC AND PLASTICS MATERIALS
DIN ISO 14635-2:2010-01 Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils (ISO 14635-2:2004)
PREN ISO 12780-2 : DRAFT 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
CSA ISO/IEC 7811-6 : 2015 IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 6: MAGNETIC STRIPE - HIGH COERCIVITY
UNI EN ISO 12780-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
09/30209365 DC : DRAFT NOV 2009 BS EN 13231-3 - RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK
BS EN ISO 16119-3:2013 Agricultural and forestry machinery. Environmental requirements for sprayers Sprayers for bush and tree crops
UNE-EN 15129:2011 Anti-seismic devices
15/30329716 DC BS EN 13289. Pasta processing plants. Dryers and coolers. Safety and hygiene requirements
DIN EN ISO 21534 E : 2009 NON-ACTIVE SURGICAL IMPLANTS - JOINT REPLACEMENT IMPLANTS - PARTICULAR REQUIREMENTS
10/30197234 DC : 0 BS ISO 28703 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR THERMAL SHOCK RESISTANCE OF POROUS CERAMICS
DD CEN ISO/TS 12780-2:2007 Geometrical product specifications (GPS). Straightness Specification operators
BS ISO 11443:2014 Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
DIN EN ISO 17450-2:2013-04 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
NF EN ISO 1133-1 : 2012 PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD
12/30262897 DC : DRAFT JUNE 2012 BS EN 1674 - FOOD PROCESSING MACHINERY - DOUGH SHELTERS - SAFETY AND HYGIENE REQUIREMENTS
12/30248590 DC : 0 BS ISO 14577-3 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS
BS EN ISO 16859-1:2015 Metallic materials. Leeb hardness test Test method
BS ISO 12085 : 96 AMD 9951 GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: PROFILE METHOD - MOTIF PARAMETERS
12/30261828 DC : 0 BS ISO 815-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 2: AT LOW TEMPERATURES
14/30304019 DC : 0 BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES
04/30078983 DC : DRAFT OCT 2004 ISO 22088-4 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 4: BALL OR PIN IMPRESSION METHOD
15/30325000 DC : 0 BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES
UNI EN ISO 15630-3 : 2010 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
DIN EN 15166:2010-02 Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements
05/30130669 DC : DRAFT MAR 2005 BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS ISO 19487:2016 Metallic and other inorganic coatings. Electrodeposited nickel-ceramics composite coatings
ISO 5287:2003 Belt drives Narrow V-belts for the automotive industry Fatigue test
16/30282721 DC : 0 BS ISO 18487-1 - AEROSPACE SERIES - TITANIUM TUBE FOR 35MPA OPERATING PRESSURE - PART 1: INCH SERIES
BS ISO 6336-3:2006 Calculation of load capacity of spur and helical gears Calculation of tooth bending strength
05/30032019 DC : DRAFT SEP 2005 ISO 6194-1 - ROTARY SHAFT LIP TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES
UNE-EN ISO 7963:2011 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
10/30201497 DC : 0 BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
04/30074898 DC : DRAFT MAY 2004 EN ISO 4545-3 - METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS
03/114108 DC : DRAFT AUG 2003 EN 14655 - FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
10/30234619 DC : 0 BS EN 14420-2 - HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL
BS ISO 28703:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal-shock resistance of porous ceramics
BS ISO 3290-1:2014 Rolling bearings. Balls Steel balls
BS EN ISO 25178-605:2014 Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (point autofocus probe) instruments
15/30324532 DC : 0 BS ISO 20808 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FRICTION AND WEAR CHARACTERISTICS OF MONOLITHIC CERAMICS BY BALL-ON-DISC METHOD
11/30251971 DC : 0 BS EN 12041 - FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
10/30234423 DC : 0 BS EN ISO 16119-2 - AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS - ENVIRONMENTAL PROTECTION - PART 2: FIELD CROP SPRAYERS
08/30184289 DC : DRAFT SEP 2008 BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
DIN EN ISO 25178-701:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
S.R. CEN/TS 16165:2016 DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION
BS ISO/IEC 15457-2:2007 Identification cards. Thin flexible cards Magnetic recording technique
DD ISO/TS 10993-19:2006 Biological evaluation of medical devices Physico-chemical, morphological and topographical characterization of materials
I.S. EN ISO 17450-2:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012)
UNE-EN ISO 17450-2:2015 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
BS ISO 9084:2000 Calculation of load capacity of spur and helical gears. Application to high speed gears and gears of similar requirements
INCITS/ISO/IEC 7811-6 : 2015 IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 6: MAGNETIC STRIPE - HIGH COERCIVITY
ISO 7206-2:2011 Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials
ISO 9981:1998 Belt drives Pulleys and V-ribbed belts for the automotive industry PK profile: Dimensions
EN 15129:2018 (edition 2) Anti-seismic devices
ISO 6336-3:2006 Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength
UNE-EN ISO 25178-602:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
CSA ISO/IEC 22050 : 2004 INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12,7 MM, 384-TRACK MAGNETIC TAPE CARTRIDGES - ULTRIUM-1 FORMAT
I.S. EN ISO 14607:2009 NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS (ISO 14607:2018)
CSA C62155 : 2006 : R2015 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
SAE AS 27196 : 2014 SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROCARBON RUBBER, AMS7276
PREN 4832 : DRAFT 2017 AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION
EN IEC 60099-8:2018 Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
ISO 23519:2010 Sintered metal materials, excluding hardmetals Measurement of surface roughness
I.S. EN 16281:2013 CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
ISO 13091-1:2001 Mechanical vibration Vibrotactile perception thresholds for the assessment of nerve dysfunction Part 1: Methods of measurement at the fingertips
I.S. EN IEC 60099-8:2018 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
CEI EN 50526-1 : 2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
16/30322240 DC : 0 BS EN 14535-2 - RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 2: BRAKE DISCS MOUNTED ONTO THE WHEEL, DIMENSIONS AND QUALITY REQUIREMENTS
AWS C4.6M : 2006 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES
I.S. EN ISO 16859-1:2015 METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD (ISO 16859-1:2015)
S.R. CEN TS 13001-3-5:2010 CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE OF FORGED HOOKS
I.S. EN 16282-2:2016 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS
I.S. EN ISO 16859-3:2015 METALLIC MATERIALS - LEEB HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE TEST BLOCKS (ISO 16859-3:2015)
I.S. EN 16452:2015+A1:2019 RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCKS
ISO 8399-2:1998 Aerospace — Accessory drives and mounting flanges (Metric series) — Part 2: Dimensions
UNI ISO 10817-1 : 2011 ROTATING SHAFT VIBRATION MEASURING SYSTEMS - PART 1: RELATIVE AND ABSOLUTE SENSING OF RADIAL VIBRATION
ISO 6195:2013 Fluid power systems and components Cylinder-rod wiper-ring housings in reciprocating applications Dimensions and tolerances
ISO 8124-1:2018 Safety of toys — Part 1: Safety aspects related to mechanical and physical properties
UNE-EN 60099-4:2016 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
CSA ISO 5362 : 2014 ANAESTHETIC RESERVOIR BAGS
EN 12331:2015 Food processing machinery - Mincing machines - Safety and hygiene requirements
18/30365854 DC : 0 BS EN 1337-6 - STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
BS ISO 254:2011 Belt drives. Pulleys. Quality, finish and balance
UNI EN ISO 25178-6 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE
BS EN 12697-31:2007 Bituminous mixtures. Test methods for hot mix asphalt Specimen preparation by gyratory compactor
DIN EN 15129:2010-06 ANTI-SEISMIC DEVICES
ISO 14607:2007 Non-active surgical implants Mammary implants Particular requirements
BIS IS 10187 : 2013 HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES
EN 71-8:2018 Safety of toys - Part 8: Activity toys for domestic use
UNI EN ISO 17450-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES
I.S. EN ISO 13287:2012 PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE (ISO 13287:2012)
DIN EN 1672-2:2009-07 Food processing machinery - Basic concepts - Part 2: Hygiene requirements (includes Amendment A1:2009)
DIN EN 1673:2010-10 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements (includes Amendment A1:2009)
I.S. EN 12390-4:2000 TESTING HARDENED CONCRETE - PART 4: COMPRESSIVE STRENGTH - SPECIFICATION FOR TESTING MACHINES
DIN EN 13288:2010-10 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN 1759-1:2005-02 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
DIN EN 13231-3 E : 2012 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK
DIN EN 12852:2011-02 Food processing machinery - Food processors and blenders - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 13081:2012-05 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler (includes Amendment A1:2012)
DIN EN 13591:2010-10 Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN ISO 14577-3:2015-11 METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 14577-3:2015)
DIN EN ISO 6508-3:2015-06 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015)
DIN EN 13389:2010-10 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements (includes Amendment A1:2009)
BS EN 10288:2002 Steel tubes and fittings for onshore and offshore pipelines. External two layer extruded polyethylene based coatings
BS EN ISO 1302:2002 Geometrical product specifications (GPS). Indication of surface texture in technical product documentation
BS EN ISO 14880-4:2006 Optics and photonics. Microlens arrays Test methods for geometrical properties
BS EN ISO 3274:1998 Geometric product specifications (GPS). Surface texture. Profile method. Nominal characteristics of contact (stylus) instruments
BS EN 12852 : 2001 FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 13954 : 2005 FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12984 : 2005 FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 15183:2006 Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test
BS EN ISO 4288:1998 Geometric product specification (GPS). Surface texture. Profile method: Rules and procedures for the assessment of surface texture
UNE-EN ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017)
BS EN 623-4:2004 Advanced technical ceramics. Monolithic ceramics. General and textural properties Determination of surface roughness
BS EN 13311-5:2001 Biotechnology. Performance criteria for vessels Kill tanks
BS EN 10305-2:2016 Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes
UNE-EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012)
BS EN ISO 12085 : 1998 GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: PROFILE METHOD - MOTIF PARAMETERS
BS EN 454:2014 Food processing machinery. Planetary mixers. Safety and hygiene requirements
DIN EN 10305-1:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
BS EN ISO 5436-1:2001 Geometrical Product Specifications (GPS). Surface texture: Profile method; Measurement standards Geometric product specifications (GPS). Surface texture. Profile method calibration. Measurement standards
BS EN 13886 : 2005 FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12721 : 2009 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT
BS EN 12853 : 2001 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12571:1999 Materials and articles in contact with foodstuffs. Transport units for catering containers containing prepared foodstuffs. Thermal and hygienic requirements and testing
BS EN 1678 : 1998 FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1673 : 2000 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
EN 1672-2:2005+A1:2009 Food processing machinery - Basic concepts - Part 2: Hygiene requirements
EN 13870:2015 Food processing machinery - Portion cutting machines - Safety and hygiene requirements
I.S. EN 13871:2014 FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13951:2012 LIQUID PUMPS - SAFETY REQUIREMENTS - AGRIFOODSTUFFS EQUIPMENT; DESIGN RULES TO ENSURE HYGIENE IN USE
I.S. EN 10305-2:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
DIN EN 12851:2010-10 FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13570:2005 FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 454:2014 FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
EN 60099-4:2014 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
EN ISO 12780-2:2011 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
EN ISO 13287:2012 Personal protective equipment - Footwear - Test method for slip resistance (ISO 13287:2012)
EN 13001-3-3:2014 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
CEN ISO/TS 12181-2:2007 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO/TS 12181-2:2003)
EN 10305-3:2016 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
EN 12722:2009+A1:2013 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT
EN 62444 : 2013 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED)
EN 13231-4:2013 Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings
EN 1092-3:2003/AC:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
EN 12761-3:2001 Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors - Environmental protection - Part 3: Air-assisted sprayers for bush and tree crops
EN 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
EN 13311-1:2001 Biotechnology - Performance criteria for vessels - Part 1: General performance criteria
EN 12952-3:2011 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
EN 12571:1998 Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and testing
EN 13083:2008+A1:2013 Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
EN 12355:2003+A1:2010 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements
EN ISO 12179:2000/AC:2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS
EN 10339:2007 Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection
EN 12852:2001+A1:2010 Food processing machinery - Food processors and blenders - Safety and hygiene requirements
EN ISO 14638:2015 Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)
EN 12043:2014 Food processing machinery - Intermediate provers - Safety and hygiene requirements
DIN EN ISO 15732:2005-09 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003)
EN 13208:2003+A1:2010 Food processing machinery - Vegetable peelers - Safety and hygiene requirements
EN 10305-5:2016 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
EN 10288:2002 Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
DIN EN 13001-3-3:2015-02 CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
EN 12390-4:2000 Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines
EN 12462:1998 Biotechnology - Performance criteria for pumps
EN 12041:2014 Food processing machinery - Moulders - Safety and hygiene requirements
EN 10305-2:2016 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
EN 13534:2006+A1:2010 Food processing machinery - Curing injection machines - Safety and hygiene requirements
EN 13311-5:2001 Biotechnology - Performance criteria for vessels - Part 5: Kill tanks
EN 13312-1:2001 Biotechnology - Performance criteria for piping and instrumentation - Part 1: General performance criteria
EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
EN 1337-2:2004 Structural bearings - Part 2: Sliding elements
EN 12561-6:2011 (edition 2) Railway applications - Tank wagons - Part 6: Manholes
EN 1071-2 : 2002 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 2: DETERMINATION OF COATING THICKNESS BY THE CRATER GRINDING METHOD
EN 13231-3:2012 Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track
EN 13081:2008+A1:2012 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
EN 12690:1999 Biotechnology - Performance criteria for shaft seals
I.S. EN ISO 1302:2002 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION
EN 1337-6:2004 Structural bearings - Part 6: Rocker bearings
EN 1337-4:2004/AC:2007 STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
EN 1071-1 : 2003 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 1: DETERMINATION OF COATING THICKNESS BY CONTACT PROBE FILOMETER
EN 12854:2003+A1:2010 Food processing machinery - Beam mixers - Safety and hygiene requirements
CEN ISO/TS 12780-2:2007 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO/TS 12780-2:2003)
EN ISO 6508-3:2015 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015)
DIN EN ISO 11114-4:2017-09 TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT (ISO 11114-4:2017)
ONORM EN 12355 : 2011 FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
ONORM EN ISO 293 : 2005 PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS
VDI/VDE 2252 Blatt 2:2007-09 Precision engineering components - Guides - Synthetic gliding bearings
EN 50368:2003 Cable cleats for electrical installations
DD CEN/TS 13001-3-5:2010 Cranes. General design Limit states and proof of competence of forged hooks
EN 14423:2013+A1:2016 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
ISO 16589-1:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal dimensions and tolerances
DIN EN 12722:2014-02 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT
ISO 14627:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method
09/30200407 DC : 0 BS EN 50526-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
12/30237808 DC : DRAFT JUNE 2012 BS ISO 19631 - AEROSPACE - TUBE FITTINGS FOR FLUID SYSTEMS, 5000 PSI (35000 KPA) - QUALIFICATION SPECIFICATION
13/30273328 DC : 0 BS ISO 16610-32 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 32: ROBUST PROFILE FILTERS: SPLINE FILTERS
DIN EN ISO 1133-1:2012-03 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
BS EN ISO 27509:2012 Petroleum and natural gas industries. Compact flanged connections with IX seal ring
DIN EN ISO 7963:2010-12 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
DIN ISO 14635-3:2011-08 Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases (ISO 14635-3:2005)
BS ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Performance test procedures
BS ISO 13473-2:2002 Characterization of pavement texture by use of surface profiles Terminology and basic requirements related to pavement texture profile analysis
DD ENV 13287:2002 Safety, protective and occupational footwear for professional use. Test method for the determination of slip resistance
BS ISO 16525-3:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Determination of heat-transfer properties
DD ISO/TS 16610-1:2006 Geometrical product specifications (GPS). Filtration Overview and basic concepts
07/30162647 DC : 0 BS ISO 7743 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES
BS ISO 9083:2001 Calculation of load capacity of spur and helical gears. Application to marine gears
BS ISO 18535:2016 Diamond-like carbon films. Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
BS ISO 14999-4:2015 Optics and photonics. Interferometric measurement of optical elements and optical systems Interpretation and evaluation of tolerances specified in ISO 10110
BS ISO 19631:2015 Aerospace series. Tube fittings for fluid systems, 5 080 psi (35 000 kPa). Qualification specification
DIN ISO 815-2:2016-09 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures (ISO 815-2:2014)
CEI EN 62217 : 2013 POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
UNI EN ISO 12181-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
04/30095200 DC : DRAFT MAY 2004 EN ISO 6506-3 - METALLIC MATERIALS. BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS
15/30318551 DC : 0 BS EN 62276 ED. 3.0 - SINGLE CRYSTAL WAFERS FOR SURFACE ACOUSTIC WAVE (SAW) DEVICE APPLICATION - SPECIFICATIONS AND MEASURING METHODS
ISO 4401:2005 Hydraulic fluid power — Four-port directional control valves — Mounting surfaces
10/30234427 DC : 0 BS EN ISO 16119-3 - AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS - ENVIRONMENTAL PROTECTION - PART 3: AIR-ASSISTED SPRAYERS FOR BUSH AND TREE CROPS
13/30285283 DC : 0 BS EN 13001-3-5 - CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATE AND PROOF OF COMPETENCE OF FORGED HOOKS
UNE-EN 13001-3-3:2015 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
BS ISO 15407-2:2003 Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces with optional electrical connector
BS ISO 17296-4 : 2014 ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 4: OVERVIEW OF DATA PROCESSING
13/30263776 DC : 0 BS ISO 6506-3 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS
12/30260942 DC : 0 BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
13/30269778 DC : 0 BS ISO/IEC 7811-6 - IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 6: MAGNETIC STRIPE - HIGH COERCIVITY
BS ISO 10110-8:2010 Optics and photonics. Preparation of drawings for optical elements and systems Surface texture; roughness and waviness
PREN 14535-2 : DRAFT 2016 RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 2: BRAKE DISCS MOUNTED ONTO THE WHEEL, DIMENSIONS AND QUALITY REQUIREMENTS
BS EN 13001-3-3:2014 Cranes. General design Limit states and proof of competence of wheel/rail contacts
15/30289820 DC : 0 BS EN ISO 4545-3 - METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS
03/317249 DC : DRAFT OCT 2003 ISO 12986-2 - CARBONACEOUS MATERIALS USED IN THE PRODUCTION OF ALUMINIUM - PREBAKED ANODES AND CATHODE BLOCKS - PART 2: DETERMINATION OF FLEXURAL STRENGTH BY THE FOUR-POINT METHOD
BS ISO 15341:2014 Graphic technology. Method for radius determination of printing cylinders
BS ISO 1099:2017 Metallic materials. Fatigue testing. Axial force-controlled method
11/30217708 DC : 0 BS ISO 14628 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ROLLING CONTACT FATIGUE OF SILICON NITRIDE CERAMICS AT ROOM TEMPERATURE BY BALLS-ON-FLAT METHOD
13/30291469 DC : 0 BS EN 13870 - FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
16/30316689 DC : 0 BS ISO 7207-2 AMD 1 - IMPLANTS FOR SURGERY - COMPONENTS FOR PARTIAL AND TOTAL KNEE JOINT PROSTHESES - PART 2: ARTICULATING SURFACES MADE OF METAL, CERAMIC AND PLASTICS MATERIALS
10/30234330 DC : DRAFT DEC 2010 BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
BS ISO 3384-2:2012 Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression Testing with temperature cycling
BS EN ISO 17450-2:2012 Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities
SAE AS 27197 : 2014 SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, SILICONE RUBBER, AMS7268
I.S. EN 62444:2013 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010 (MOD))
07/30131653 DC : 0 BS ISO 6194-2 - ROTARY SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 2: VOCABULARY
16/30346239 DC : 0 BS ISO 8364 - ALPINE SKIS AND BINDINGS - BINDING MOUNTING AREA - REQUIREMENTS AND TEST METHODS
PREN 62444 : DRAFT 2013 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED)
CEI EN 62155 : 2004 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
DIN ISO 14635-1:2006-05 Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000)
03/314803 DC : DRAFT SEP 2003 ISO 6336-2 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 2: CALCULATION OF SURFACE DURABILITY (PITTING)
DIN EN 16743 E : 2016 FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
ISO 15341:2014 Graphic technology Method for radius determination of printing cylinders
DIN ISO 16260 E : 2017 PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016)
BS EN 16701:2014 Energetic materials for defence. Safety, vulnerability. Friability
UNE-ISO 3384-1:2017 Rubber, vulcanize or thermoplastic. Determination of stress relaxation in compression. Part 1: Testing at constant temperature
08/30154948 DC : DRAFT FEB 2008 BS ISO 21809-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 4: POLYETHYLENE COATINGS (2-LAYER PE)
BS EN ISO 16946:2017 Non-destructive testing. Ultrasonic testing. Specification for step wedge calibration block
BS EN 50526-2:2014 Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices Voltage limiting devices
04/104967 DC : DRAFT APR 2004 ISO/DIS 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS
NF EN 62155 : 2003 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
11/30251968 DC : 0 BS EN 454 - FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
06/30152318 DC : DRAFT JUL 2006 BS EN 12721 - FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT
06/30152321 DC : 0 BS EN 12722 - FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT
13/30246059 DC : 0 BS ISO 15341 - GRAPHIC TECHNOLOGY - METHOD FOR RADIUS DETERMINATION OF PRINTING CYLINDERS
EN 13001-3-5:2016 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
10/30204467 DC : 0 BS ISO 16589-2 - ROTARY SHAFT LIP-TYPE SEALS INCORPORATING THERMOPLASTIC SEALING ELEMENTS - PART 2: VOCABULARY
BS ISO 13179-1:2014 Implants for surgery. Plasma-sprayed unalloyed titanium coatings on metallic surgical implants General requirements
13/30269775 DC : 0 BS ISO/IEC 7811-2 - IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 2: MAGNETIC STRIPE
PREN 10049 : DRAFT 2013 MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS
03/306830 DC : DRAFT APR 2003 ISO 18669-2 - INTERNAL COMBUSTION ENGINES - PISTONS PINS - PART 2: INSPECTION MEASURING PRINCIPLES
12/30259995 DC : 0 BS EN 12463 - FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 50526-1:2012 Railway applications. Fixed Installations. D.C. surge arresters and voltage limiting devices Surge arresters
07/30144373 DC : 0 BS ISO 3601-2 - FLUID POWER SYSTEMS - O-RINGS - PART 2: HOUSING DIMENSIONS FOR GENERAL APPLICATIONS
DIN EN ISO 25178-605:2014-06 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS (ISO 25178-605:2014)
12/30212355 DC : 0 BS ISO 13179-1 - IMPLANTS FOR SURGERY - PLASMA SPRAYED COATINGS OF UNALLOYED TITANIUM - PART 1: GENERAL REQUIREMENTS
BS ISO 17170:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for spherical indentation of porous ceramics
UNI EN ISO 25178-701 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS
BS ISO 12891-2:2014 Retrieval and analysis of surgical implants Analysis of retrieved surgical implants
ISO 27307:2015 Thermal spraying Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by transverse scratch testing
DD CEN ISO/TS 12181-2 : DRAFT 2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
BS EN 16743:2016 Food processing machinery. Automatic industrial slicing machines. Safety and hygiene requirements
DIN EN ISO 16119-4:2015-04 AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 4: FIXED AND SEMI-MOBILE SPRAYERS (ISO 16119-4:2014)
09/30185454 DC : 0 BS ISO 10110-8 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 8: SURFACE TEXTURE
12/30261825 DC : 0 BS ISO 815-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 1: AT AMBIENT OR ELEVATED TEMPERATURES
BS ISO 17744:2004 Plastics. Determination of specific volume as a function of temperature and pressure (pVT diagram). Piston apparatus method
CSA C62155:2006 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
04/30125823 DC : DRAFT NOV 2004 ISO 17092 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF CORROSION RESISTANCE OF MONOLITHIC CERAMICS IN ACID AND ALKALINE SOLUTIONS
13/30278066 DC : 0 BS EN ISO 16119-4 - AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS AND TESTING FOR SPRAYERS - PART 4: FIXED AND SEMI-MOBILE SPRAYERS
I.S. EN 15129:2009 ANTI-SEISMIC DEVICES
PREN 12697-31 : DRAFT 2014 BITUMINOUS MIXTURES - TEST METHODS - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
BS ISO 815-1:2014 Rubber, vulcanized or thermoplastic. Determination of compression set At ambient or elevated temperatures
NACE TM 01 77 : 2016 LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS
04/30106630 DC : DRAFT APR 2004 BS ISO 21182 - LIGHT CONVEYOR BELTS - TEST METHODS FOR THE DETERMINATION OF THE COEFFICIENT OF FRICTION
DIN ISO 6195 E : 2009 FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER-ROD WIPER-RING HOUSINGS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES
S.R. CEN ISO TS 12181-2:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
ISO/TR 6336-30:2017 Calculation of load capacity of spur and helical gears — Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5
BS ISO 16589-1 : 2011 ROTARY SHAFT LIP-TYPE SEALS INCORPORATING THERMOPLASTIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES
ISO 3384-1:2011 Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 1: Testing at constant temperature
UNI EN 15165 : 2014 FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNE-ISO 815-2:2011 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 2: At low temperatures
CSA ISO/IEC 15457-2 : 2008 : R2013 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 2: MAGNETIC RECORDING TECHNIQUE
BS ISO 3384-1 : 2011 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATIONIN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE
CAN/CSA-ISO/IEC 15457-2-08 (R2018) Identification cards - Thin flexible cards - Part 2: Magnetic recording technique (Adopted ISO/IEC 15457-2:2007, second edition, 2007-06-15)
UNE-EN ISO 12181-2:2012 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
I.S. EN ISO 16119-4:2014 AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 4: FIXED AND SEMI-MOBILE SPRAYERS (ISO 16119-4:2014)
I.S. EN ISO 12181-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
16/30337802 DC : 0 BS EN 1974 - FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
PREN 14535-1 : DRAFT 2016 RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 1: BRAKE DISCS PRESSED OR SHRUNK ONTO THE AXLE OR DRIVE SHAFT, DIMENSIONS AND QUALITY REQUIREMENTS
I.S. EN 50262:1999 METRIC CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
I.S. EN 13231-4:2013 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 4: ACCEPTANCE OF REPROFILING RAILS IN SWITCHES AND CROSSINGS
DIN EN ISO 16946:2016-09 (Draft) NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR STEP WEDGE CALIBRATION BLOCK (ISO 16946:2017)
UNI EN 16281 : 2013 CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
BIS IS 13360-2-2 : 2013 PLASTICS - METHODS OF TESTING - PART 2: SAMPLING AND PREPARATION OF TEST SPECIMENS - SECTION 2: COMPRESSION MOULDED TEST SPECIMENS OF THERMOPLASTIC MATERIALS
IEC 60099-8:2017 Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
I.S. EN 14423:2013 CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
ONORM ISO 8364 : 2008 ALPINE SKIS AND BINDINGS - BINDING MOUNTING AREA - REQUIREMENTS AND TEST METHODS
ISO 1099:2017 Metallic materials — Fatigue testing — Axial force-controlled method
ISO 10766:2014 Hydraulic fluid power Cylinders Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
PREN 12041 : DRAFT 2011 FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
ISO/TS 10303-5001:2010 Industrial automation systems and integration — Product data representation and exchange — Part 5001: Guidance on the usage of ISO 10303-214 for gear units
ISO 5599-1:2001 Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector
PREN 1974 : DRAFT 2016 FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
ISO 12301:2007 Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics
ISO 254:2011 Belt drives Pulleys Quality, finish and balance
BS EN ISO 14607:2009 Non-active surgical implants. Mammary implants. Particular requirements
UNI EN ISO 14607 : 2009 NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS
BS EN 15129:2009 Anti-seismic devices
ISO 815-1:2014 Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures
I.S. EN ISO 25178-70:2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
NF EN ISO 7963 : 2010 NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING SPECIFICATION FOR CALIBRATION BLOCK NO 2
ISO 6336-1:2006 Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors
DIN EN 12042:2014-07 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 15129 : 2009 ANTI-SEISMIC DEVICES
BS ISO/IEC 7811-2:2014 Identification cards. Recording technique Magnetic stripe. Low coercivity
UNI EN 12042 : 2014 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009)
UNE-EN 16282-4:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 4: Air inlets and outlets; Design and safety requirements
PREN 1337-6 : DRAFT 2018 STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
CEI EN 60099-4 : 2015 SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS
UNI EN ISO 16119-3 : 2013 AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 3: SPRAYERS FOR BUSH AND TREE CROPS
NACE TM 01 98 : 2016 SLOW STRAIN RATE TEST METHOD FOR SCREENING CORROSION-RESISTANT ALLOYS FOR STRESS CORROSION CRACKING IN SOUR OILFIELD SERVICE
CEI EN 62444 : 2014 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
I.S. EN ISO 27509:2012 PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012)
UNI EN ISO 7963 : 2010 NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR CALIBRATION BLOCK N DEGREE 2
ASTM D 7127 : 2017 : REDLINE Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
EN ISO 6507-3:2018 Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018)
ASTM F 2791 : 2015 : REDLINE Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions
EN ISO 6506-3:2014 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014)
ISO 15218:2003 Pneumatic fluid power — 3/2 solenoid valves — Mounting interface surfaces
I.S. EN ISO 12085:1998 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS
IEC 60099-8 REDLINE : 2ED 2017 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
IEC 62899-201:2016 Printed electronics - Part 201: Materials - Substrates
IEC TS 61994-4-4:2010 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for surface acoustic wave (SAW) devices
I.S. EN ISO 15324:2008 CORROSION OF METALS AND ALLOYS - EVALUATION OF STRESS CORROSION CRACKING BY THE DROP EVAPORATION TEST
DIN EN 1678:2011-02 Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN ISO 20482 E : 2014 METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST (ISO 20482:2013)
DIN EN 1674:2015-12 FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12984:2011-02 Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12331:2015-12 Food processing machinery - Mincing machines - Safety and hygiene requirements
DIN EN ISO 14577-1:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015
DIN EN 1916:2003-04 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED
DIN EN ISO 21179 E : 2013 LIGHT CONVEYOR BELTS - DETERMINATION OF THE ELECTROSTATIC FIELD GENERATED BY A RUNNING LIGHT CONVEYOR BELT (ISO 21179:2013)
DIN EN ISO 14577-4:2015-05 (Draft) METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016)
DIN EN 13951:2012-08 LIQUID PUMPS - SAFETY REQUIREMENTS - AGRIFOODSTUFFS EQUIPMENT; DESIGN RULES TO ENSURE HYGIENE IN USE
DIN EN 10305-4 E : 2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
DIN EN ISO 295:2004-05 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004)
DIN EN 10305-6:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
DIN EN ISO 20482:2014-03 METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST (ISO 20482:2013)
DIN EN ISO 14159:2008-07 SAFETY OF MACHINERY - HYGIENE REQUIREMENTS FOR THE DESIGN OF MACHINERY
DIN EN 12041:2015-02 FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 15183 E : 2006 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - CORROSION PROTECTION TEST
DIN EN ISO 293:2005-10 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
DIN EN 1337-6:2004-08 Structural bearings - Part 6: Rocker bearings
DIN EN 14655:2010-11 Food processing machinery - Baguette slicers - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN ISO 8785:1999-10 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE IMPERFECTIONS - TERMS, DEFINITIONS AND PARAMETERS
DIN EN ISO 9013:2003-07 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
BS EN 10049:2013 Measurement of roughness average <i>Ra</i> and peak count <i>RPc</i> on metallic flat products
BS EN 13570 : 2005 FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN ISO 1514:2004 Paints and varnishes. Standard panels for testing
UNE-EN 10305-1:2016 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
ISO 14635-1:2000 Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
IEC 62276:2016 Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods
UNE-EN 10305-5:2016 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
DIN EN 10305-3:2016-08 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
BS EN ISO 20482:2013 Metallic materials. Sheet and strip. Erichsen cupping test
BS EN 12884:1999 Biotechnology. Performance criteria for centrifuges
BS EN 12885:1999 Biotechnology. Performance criteria for cell disrupters
UNE-EN ISO 6508-3:2015 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015)
ISO 25178-70:2014 Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Material measures
BS EN 12043:2014 Food processing machinery. Intermediate provers. Safety and hygiene requirements
UNE-EN ISO 7539-1:2013 Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:2012)
BS EN ISO 8503-4:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure
BS EN 1071-3:2005 Advanced technical ceramics. Methods of test for ceramic coatings Determination of adhesion and other mechanical failure modes by a scratch test
BS EN 438-2 : 2016 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
ISO 21182:2013 Light conveyor belts — Determination of the coefficient of friction
BS EN 13534 : 2006 FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
BS EN 1337-2:2004 Structural bearings Sliding elements
I.S. EN ISO 11114-4:2017 TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT (ISO 11114-4:2017)
I.S. EN 10305-5:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES
I.S. EN 13954:2005 FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 6508-3:2015 METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3 - CALIBRATION OF REFERENCE BLOCKS (ISO 6508-3:2015)
I.S. EN 10305-6:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
I.S. EN 13288:2005 FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12331:2015 FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13885:2005 FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 9013:2017 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
UNI EN 1673 : 2010 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
EN 1916:2002/AC:2008 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED
I.S. EN 13886:2005 FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13621:2004 FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 10049:2013 MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS
I.S. EN 12721:2009 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT
I.S. EN 12043:2014 FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
EN 1673:2000+A1:2009 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements
I.S. EN ISO 21182:2013 LIGHT CONVEYOR BELTS - DETERMINATION OF THE COEFFICIENT OF FRICTION (ISO 21182:2013)
I.S. EN 13534:2006 FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS
EN ISO 27509:2012/AC:2013 PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012/COR 1:2013)
DIN EN 1071-2:2003-02 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 2: DETERMINATION OF COATING THICKNESS BY THE CRATER GRINDING METHOD
I.S. EN 13208:2003 FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13083:2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
I.S. EN 453:2014 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1672-2 : 2009 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS
I.S. EN ISO 21179:2013 LIGHT CONVEYOR BELTS - DETERMINATION OF THE ELECTROSTATIC FIELD GENERATED BY A RUNNING LIGHT CONVEYOR BELT (ISO 21179:2013)
DIN EN 1820:2009-12 ANAESTHETIC RESERVOIR BAGS
I.S. EN ISO 293:2005 PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS
DIN EN ISO 6506-3:2015-02 METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6506-3:2014)
I.S. EN ISO 8503-1:2012 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 1: SPECIFICATIONS AND DEFINITIONS FOR ISO SURFACE PROFILE COMPARATORS FOR THE ASSESSMENT OF ABRASIVE BLAST-CLEANED SURFACES (ISO 8503-1:2012)
DIN EN 1071-3:2005-10 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 3: DETERMINATION OF ADHESION AND OTHER MECHANICAL FAILURE MODES BY A SCRATCH TEST
I.S. EN 12355:2003 FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 14159:2008 SAFETY OF MACHINERY - HYGIENE REQUIREMENTS FOR THE DESIGN OF MACHINERY
I.S. EN 12852:2001 FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 8503-4:2012 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 4: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE - STYLUS INSTRUMENT PROCEDURE (ISO 8503-4:2012)
I.S. EN 12851:2006 FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13591:2005 FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12020-1:2008 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
I.S. EN ISO 7539-1:2012 CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 1: GENERAL GUIDANCE ON TESTING PROCEDURES (ISO 7539-1:2012)
I.S. EN 12984:2006 FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12041:2014 FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1674:2015 FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 14577-4:2016 METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016)
EN ISO 17296-4:2016 Additive manufacturing - General principles - Part 4: Overview of data processing (ISO 17296-4:2014)
I.S. EN 1672-2:2005 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - HYGIENE REQUIREMENTS
I.S. EN 13555:2014 FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS
I.S. EN 13081:2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
DIN EN ISO 1133:2000-02 PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS
DIN EN 12761-3:2002-01 AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS; ENVIRONMENTAL PROTECTION - PART 3: AIR-ASSISTED SPRAYERS FOR BUSH AND TREE CROPS
I.S. EN 13389:2005 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 1133:2005-09 PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS
I.S. EN 13870:2015 FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
EN 13555:2014 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
I.S. EN 13231-3:2012 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK
I.S. EN 12952-3:2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER
I.S. EN 12853:2001 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 6506-3:2014 METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6506-3:2014)
I.S. EN ISO 1514:2016 PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING (ISO 1514:2016)
I.S. EN 10305-4:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
I.S. EN ISO 14577-3:2015 METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 14577-3:2015)
DIN EN 12761-2:2002-01 AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS; ENVIRONMENTAL PROTECTION - PART 2: FIELD CROP SPRAYERS
I.S. EN 12854:2003 FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 10305-1:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
I.S. EN ISO 5981:2007 RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF RESISTANCE TO COMBINED SHEAR FLEXING AND RUBBING
I.S. EN 10305-3:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES
ONORM EN 1673 : OCT 2010 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14655:2005 FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12561-6:2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
IEC 61914:2015 Cable cleats for electrical installations
I.S. EN 1678:1998 FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 14577-1:2015 METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 1: TEST METHOD (ISO 14577-1:2015)
I.S. EN ISO 20482:2013 METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST (ISO 20482:2013)
I.S. EN 13390:2002 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12722:2009 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT
I.S. EN 1673:2000 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 453 : 2014 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13390 : 2010 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
VDI/VDE 2655 Blatt 1.2:2010-10 Optical measurement of microtopography - Calibration of confocal microscopes and depth setting standards for roughness measurement
VDI 3414 Blatt 2:2014-02 (Draft) Quality evaluation of wooden surfaces - Testing and measuring methods
VDI 2083 Blatt 17:2013-06 Cleanroom technology - Compatibility of materials with the required cleanliness
VDI 5581:2011-11 Measurement procedures for quality control in precision moulding of aspherical, freeform and microoptics
VDI/VDE 2655 Blatt 1.1:2008-03 Optical measurement and microtopographies - Calibration of interference microscopes and depth measurement standards for roughness measurement
VDI/VDE 2631 Blatt 3:2007-08 Form measurement - Properties and selection of filters
VDI 3414 Blatt 3:2014-02 (Draft) Quality evaluation of wooden surfaces - Milled, sawn, planed, drilled and turned surfaces.
VDI/VDE 2656 Blatt 1:2008-06 Determination of geometrical quantities by using of Scanning Probe Microscopes - Calibration of measurement systems
VDI/VDE 2631 Blatt 7:2012-02 Form measurement - Determination of positional deviations of the form-measurement axes
VDI/VDE 2612 Blatt 5:2015-02 Measurement and testing of gearings - Surface roughness measurement of cylindrical gears and bevel gears by means of stylus-type instruments
BS 903-A61(2000) : 2000 AMD 13431 RUBBER - DETERMINATION OF FRICTIONAL PROPERTIES
VDI 2083 Blatt 9.1:2006-12 Clean room technology - Compatibility with required cleanliness and surface cleanliness
VDI 3431:2016-08 Bending of profiles - Testing notes for profile bending elements
VDI 3405 Blatt 2:2013-08 Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing
ONORM EN ISO 1133-1 : 2012 PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD (ISO 1133-1:2011)
VDI/VDE 2602 Blatt 4:2014-09 Surface measurement - Roughness measurement using contact (stylus) instruments - Calibration, uncertainty of measurement
15/30324994 DC : 0 BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES
PREN 10305-5 : DRAFT 2015 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES
DIN EN ISO 16946 E : 2017 NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR STEP WEDGE CALIBRATION BLOCK (ISO 16946:2017)
DIN ISO 3601-2:2010-08 Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008)
16/30300288 DC : 0 BS ISO 19606 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR SURFACE ROUGHNESS OF FINE CERAMIC FILMS BY ATOMIC FORCE MICROSCOPY
16/30290361 DC : 0 BS EN ISO 6507-3 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS
UNI EN ISO 25178-604 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS
BS ISO 6621-2:2003 Internal combustion engines. Piston rings Inspection measuring principles
BS EN 13231-4:2013 Railway applications. Track. Acceptance of works Acceptance of reprofiling rails in switches and crossings
BS ISO 14635-1:2000 Gears. FZG test procedures FZG test method A/8, 3/90 for relative scruffing load-carrying capacity of oils
17/30356577 DC : 0 BS EN 60099-8 - SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
BS ISO 9982:1998 Belt drives. Pulleys and V-ribbed belts for industrial applications. PH, PJ, PK, PL and PM profiles. Dimensions
BS ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements Performance test procedures
14/30310866 DC : 0 BS EN 4836 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER- FLARED END - WITH EXTRA FINE THREAD PITCH - INCH SERIES
BS EN ISO 15630-3:2010 Steel for the reinforcement and prestressing of concrete. Test methods Prestressing steel
BS EN 16281:2013 Child protective products. Consumer fitted child resistant locking devices for windows and balcony doors. Safety requirements and test methods
12/30248587 DC : 0 BS ISO 14577-1 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 1: TEST METHOD
04/30111329 DC : DRAFT NOV 2004 ISO 22214 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR CYCLIC BENDING FATIGUE OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE
13/30251855 DC : 0 BS ISO 25178-606 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS
I.S. EN 61400-4:2013 WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV))
14/30304022 DC : 0 BS ISO 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES
BS EN ISO 7963:2010 Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2
06/30125744 DC : 0 EN 13081 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
BS EN ISO 14644-9:2012 Cleanrooms and associated controlled environments Classification of surface cleanliness by particle concentration
13/30286103 DC : 0 BS EN 12331 - FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
PREN 13871 : DRAFT 2012 FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
PREN 13379 : DRAFT 2016 PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 22088-4:2007 PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 4: BALL OR PIN IMPRESSION METHOD
BS ISO 3290-2:2014 Rolling bearings. Balls Ceramic balls
13/30264465 DC : 0 BS EN ISO 6508-3 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS
BS ISO 27307:2015 Thermal spraying. Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by transverse scratch testing
BS ISO 5287:2003 Belt drives. Narrow V-belts for the automotive industry. Fatigue test
ISO 13473-2:2002 Characterization of pavement texture by use of surface profiles — Part 2: Terminology and basic requirements related to pavement texture profile analysis
BS EN ISO 25178-606:2015 Geometrical product specification (GPS). Surface texture: Areal Nominal characteristics of non-contact (focus variation) instruments
SSPC-PA 17 : 2012 PROCEDURE FOR DETERMINING CONFORMANCE TO STEEL PROFILE/SURFACE ROUGHNESS/PEAK COUNT REQUIREMENTS
I.S. EN ISO 1133:2005 PLASTICS - DETERMINATION OF THE MELT-MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS
09/30201490 DC : 0 BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
BS EN 16282-4:2016 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air inlets and outlets; design and safety requirements
DIN EN ISO 16859-3:2016-02 METALLIC MATERIALS - LEEB HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE TEST BLOCKS (ISO 16859-3:2015)
BS ISO 11749:2014 Belt drive. V-ribbed belts for the automotive industry. Fatigue test
UNI EN ISO 25178-601 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
BS ISO 12636:2018 Graphic technology. Blankets for offset printing
BS EN ISO 25178-602:2010 Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of non-contact (confocal chromatic probe) instruments
11/30251965 DC : 0 BS EN 453 - FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN ISO 25178-603:2013 Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
UNI EN ISO 25178-605 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS
17/30250386 DC : 0 BS ISO 17327-1 - NON-ACTIVE SURGICAL IMPLANTS - IMPLANT COATING - PART 1: GENERAL REQUIREMENTS
DIN EN 13001-3-3 E : 2015 CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
04/30077768 DC : DRAFT FEB 2004 ISO 4401 - HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES
BS EN 60099-8:2011 Surge arresters Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
UNE-EN 61914:2016 Cable cleats for electrical installations
BS ISO 28704:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for cyclic bending fatigue of porous ceramics at room temperature
UNE-EN ISO 13287:2013 Personal protective equipment - Footwear - Test method for slip resistance (ISO 13287:2012)
DIN EN ISO 21534:2009-08 NON-ACTIVE SURGICAL IMPLANTS - JOINT REPLACEMENT IMPLANTS - PARTICULAR REQUIREMENTS
DIN EN 16743:2016-05 FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS ISO 18487-1:2017 Aerospace series. Titanium tube for 35 MPa operating pressure Inch series
14/30301841 DC : 0 BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
BS EN 15166:2008 Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements
DD IEC/TS 61994-4-4:2010 Piezoelectric and dielectric devices for frequency control and selection. Glossary Materials Materials for surface acoustic wave (SAW) devices
07/30170829 DC : DRAFT AUG 2007 BS ISO 25178-601 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
BS ISO 13565-2 : 1996 AMD 9950 GEOMETRIC PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO CURVE
BS ISO 14628:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for rolling contact fatigue of silicon nitride ceramics at room temperature by balls-on-flat method
BS ISO 7207-2 : 2011 IMPLANTS FOR SURGERY - COMPONENTS FOR PARTIAL AND TOTAL KNEE JOINT PROSTHESES - PART 2: ARTICULATING SURFACES MADE OF METAL, CERAMIC AND PLASTICS MATERIALS
09/30181706 DC : 0 BS EN 12355:2003/A1 - FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS ISO 13091-1:2001 Mechanical vibrations. Vibrotactile perception thresholds for the assessment of nerve dysfunction Methods of measurement at the fingertips
DIN EN ISO 14638 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
BS ISO 6263:2013 Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces
15/30279088 DC : 0 BS ISO 18535 - DIAMOND-LIKE CARBON FILMS - DETERMINATION OF FRICTION AND WEAR CHARACTERISTICS OF DIAMOND-LIKE CARBON FILMS BY BALL-ON-DISC METHOD
DIN EN ISO 25178-70:2014-06 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
15/30268151 DC : 0 BS EN ISO 14577-4 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS
DIN EN 15165:2015-01 FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
05/30130673 DC : DRAFT MAR 2005 BS EN 15166 - FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 16282-2:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 2: Kitchen ventilation hoods; design and safety requirements
INCITS/ISO/IEC 22050 : 2002 INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12,7 MM, 384-TRACK MAGNETIC TAPE CARTRIDGES - ULTRIUM-1 FORMAT
BS EN 15165:2014 Food processing machinery. Forming machines. Safety and hygiene requirements
08/30190157 DC : DRAFT SEP 2008 BS EN ISO 14644-9 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 9: CLASSIFICATION OF SURFACE PARTICLE CLEANLINESS
BS ISO 3274 : 1996 AMD 9919 GEOMETRIC PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
UNE-EN 61386-25:2012 Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices
BS ISO 7743:2017 Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
BS EN 16282-8:2017 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Installations for treatment of aerosol. Requirements and testing
09/30198179 DC : 0 BS EN ISO 17450-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES
16/30315829 DC : 0 BS ISO 12176-1 - PLASTICS PIPES AND FITTINGS - EQUIPMENT FOR FUSION JOINTING POLYETHYLENE SYSTEMS - PART 1: BUTT FUSION
BS EN 12042:2014 Food processing machinery. Automatic dough dividers. Safety and hygiene requirements
UNI EN ISO 25178-602 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS
NF EN ISO 25178-602 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS
04/30087406 DC : DRAFT NOV 2004 ISO 7963 - WELDS IN STEEL - CALIBRATION BLOCK NO. 2 FOR ULTRASONIC EXAMINATION OF WELDS
13/30275599 DC : 0 BS EN 10049 - MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS
13/30263150 DC : 0 BS EN ISO 16859-1 - METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD
ANSI/AAMI/ISO TIR10993-19:2006 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 19: PHYSICOCHEMICAL, MORPHOLOGICAL, AND TOPOGRAPHICAL CHARACTERIZATION OF MATERIALS
11/30199626 DC : 0 BS ISO 11894-1 - FINE CERAMIC (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR CONDUCTIVITY MEASUREMENT OF ION-CONDUCTIVE FINE CERAMICS - PART 1: OXIDE-ION-CONDUCTING SOLID ELECTROLYTES
09/30198155 DC : DRAFT MAY 2009 BS EN ISO 12181-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
14/30310862 DC : 0 BS EN 4832 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION
16/30322061 DC : DRAFT MAR 2016 BS EN 13001-3-4 - CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS
17/30333744 DC : 0 BS EN ISO 25178-600 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 600: METROLOGICAL CHARACTERISTICS FOR AREAL-TOPOGRAPHY MEASURING METHODS
NF ISO 10110-8 : 2010 OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 8: SURFACE TEXTURE - ROUGHNESS AND WAVINESS
BS EN 62217:2013 Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
UNE-EN 14653-1:2012 Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications
CEI EN 61032 : 1998 PROTECTION OF PERSONS AND EQUIPMENT BY ENCLOSURES - PROBES FOR VERIFICATION
PREN 10305-6 : DRAFT 2015 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
BS ISO 14635-3:2005 Gears. FZG test procedures FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
BS ISO 15113:2005 Rubber. Determination of frictional properties
ISO 15407-2:2003 Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 2: Mounting interface surfaces with optional electrical connector
UNE-EN ISO 16119-2:2013 Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers (ISO 16119-2:2013, Corrected version 2017-03)
BS ISO 18899:2013 Rubber. Guide to the calibration of test equipment
BS EN ISO 25178-70:2014 Geometrical product specification (GPS). Surface texture: Areal Material measures
DIN ISO 6195:2015-02 (Draft) FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER-ROD WIPER-RING HOUSINGS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES
BS ISO 815-2:2014 Rubber, vulcanized or thermoplastic. Determination of compression set At low temperatures
UNE-EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties
BS ISO/IEC 7811-6:2014 Identification cards. Recording technique Magnetic stripe. High coercivity
DIN EN ISO 6507-3:2016-08 (Draft) METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS
INCITS/ISO/IEC 7811-2 : 2001 IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 2: MAGNETIC STRIPE - LOW COERCIVITY
DIN ISO 14999-4:2016-04 Optics and photonics - Interferometric measurement of optical elements and optical systems - Part 4: Interpretation and evaluation of tolerances specified in ISO 10110 (ISO 14999-4:2015)
C22.2 NO. 18.3-12 (R2017) Conduit, tubing, and cable fittings (Tri-national standard, with ANCE NMX-J-017 and UL 514B)
CSA C22.2 No. 18.3 : 2012 CONDUIT, TUBING, AND CABLE FITTINGS
DIN EN ISO 25178-603:2014-02 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013)
PREN 71-1 : DRAFT 2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
SAE AS 27194C : 2014(S2018) SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-P-5315
DIN EN ISO 16859-1 E : 2016 METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD (ISO 16859-1:2015)
SAE AS 27198 : 2014 SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROSILICONE RUBBER, MIL-DTL-25988
BS ISO 6336-1:2006 Calculation of load capacity of spur and helical gears Basic principles, introduction and general influence factors
API 17G:2006 RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS
I.S. EN ISO 2431:2011 PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS (ISO 2431:2011)
BS ISO 7368:2016 Hydraulic fluid power. Two-port slip-in cartridge valves. Cavities
CSA ISO/IEC 7811-2 : 2002 IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 2: MAGNETIC STRIPE - LOW COERCIVITY
BS EN 16452:2015+A1:2019 Railway applications. Braking. Brake blocks
UNE-EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017)
I.S. EN ISO 17296-4:2016 ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 4: OVERVIEW OF DATA PROCESSING (ISO 17296-4:2014)
ISO 14628:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for rolling contact fatigue of silicon nitride ceramics at room temperature by balls-on-flat method
API 17G : 2006 : R2011 RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS
I.S. EN 16743:2016 FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 71-1 : 2015 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
I.S. EN ISO 16946:2017 NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR STEP WEDGE CALIBRATION BLOCK (ISO 16946:2017)
I.S. EN ISO 14644-9:2012 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 9: CLASSIFICATION OF SURFACE CLEANLINESS BY PARTICLE CONCENTRATION (ISO 14644-9:2012)
ISO 6336-2:2006 Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting)
ISO 815-2:2014 Rubber, vulcanized or thermoplastic Determination of compression set Part 2: At low temperatures
NF EN 61914 : 2016 CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
UNI EN ISO 25178-70 : 2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES
I.S. EN 15165:2014 FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 50368:2003 CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
16/30338566 DC : 2016-06 BS EN 13379 - PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1092-1 : 2013 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
KTA 3211.1 : 2015 PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
ONORM EN ISO 6507-3 : 2006 METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS
DIN EN 1092-1:2016-05 (Draft) FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
NF ISO 7206-2 : 2011 AMD 1 2016 IMPLANTS FOR SURGERY - PARTIAL AND TOTAL HIP JOINT PROSTHESES - PART 2: ARTICULATING SURFACES MADE OF METALLIC, CERAMIC AND PLASTICS MATERIALS
PREN 50526-1 : DRAFT 2009 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
NF ISO 7207-2 : 2011 AMD 1 2016 IMPLANTS FOR SURGERY - COMPONENTS FOR PARTIAL AND TOTAL KNEE JOINT PROSTHESES - PART 2: ARTICULATING SURFACES MADE OF METAL, CERAMIC AND PLASTICS MATERIALS
ISO 12636:2018 Graphic technology — Blankets for offset printing
I.S. EN 12697-31:2007 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
EN 12042 : 2014 COR 2014 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
14/30310358 DC : 0 BS EN 12697-31 - BITUMINOUS MIXTURES - TEST METHODS - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
UNI ISO 3384-1 : 2013 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE
UNE-EN 16282-3:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings; Design and safety requirements
AAMI ISO 5362 : 2006 ANAESTHETIC RESERVOIR BAGS
I.S. EN 60099-4:2014 SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS
I.S. EN 16282-3:2016 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS
ASTM F 3018 : 2017 Standard Guide for Assessment of Hard-on-Hard Articulation Total Hip Replacement and Hip Resurfacing Arthroplasty Devices
UNI ISO 7743 : 2012 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES
BIS IS/ISO 6194-1 : 2007 ROTARY SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES
ISO 3384-2:2012 Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 2: Testing with temperature cycling
ISO 5597:2010 Hydraulic fluid power Cylinders Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
PREN 13001-3-4 : DRAFT 2016 CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS
ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 4: Performance test procedures
DIN EN 71-1:2015-02 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
ISO 6621-2:2003 Internal combustion engines Piston rings Part 2: Inspection measuring principles
ISO 9084:2000 Calculation of load capacity of spur and helical gears Application to high speed gears and gears of similar requirements
ISO 20808:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
ISO 10303-214:2010 Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes
ISO/IEC 7811-6:2014 Identification cards Recording technique Part 6: Magnetic stripe High coercivity
I.S. EN 1092-1:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
ISO 18669-2:2004 Internal combustion engines Piston pins Part 2: Inspection measuring principles
ISO 5781:2016 Hydraulic fluid power Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves Mounting surfaces
IEC 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
ISO 15113:2005 Rubber — Determination of frictional properties
DIN EN ISO 7539-1:2013-04 CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 1: GENERAL GUIDANCE ON TESTING PROCEDURES (ISO 7539-1:2012)
DIN EN 13208:2011-02 Food processing machinery - Vegetable peelers - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12853:2012-02 Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN ISO 22088-4:2006-11 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006)
DIN EN ISO 9013 E : 2003 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
DIN EN 12355:2011-02 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12854:2010-12 Food processing machinery - Beam mixers - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12721:2014-02 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT
DIN EN 13083:2013-08 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
DIN EN 623-4:2005-01 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness; German version EN 623-4:2004
DIN EN 13954:2010-12 Food processing machinery - Bread slicers - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN ISO 295 E : 2004 PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOSETTING MATERIALS
DIN EN ISO 4288:1998-04 GPS - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996)
DIN EN 1337-4 E : 2004 STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
DIN EN ISO 293 E : 2005 PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS
DIN EN ISO 13287:2013-02 PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE (ISO 13287:2012)
DIN EN 13870:2015-12 Food processing machinery - Portion cutting machines - Safety and hygiene requirements
DIN EN ISO 13565-1:1998-04 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996); German version EN ISO 13565-1:1997
DIN EN 454:2015-02 Food processing machinery - Planetary mixers - Safety and hygiene requirements
DIN EN 13885:2011-02 Food processing machinery - Clipping machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 14655 E : 2010 FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12043:2015-02 FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1337-2:2004-07 Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2004
UNE-EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
BS EN 13312-1:2001 Biotechnology. Performance criteria for piping and instrumentation General performance criteria
ISO 1133-1:2011 Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method
BS EN 10329 : 2005 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
BS EN 12722 : 2009 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT
DIN EN 10305-2:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
BS EN 10305-5:2010 Steel tubes for precision applications. Technical delivery conditions Welded and cold sized square and rectangular tubes
BS EN ISO 14923:2003 Thermal spraying. Characterization and testing of thermally sprayed coatings
UNE-EN 12331:2016 Food processing machinery - Mincing machines - Safety and hygiene requirements
BS EN 12355 : 2003 FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
ISO 16119-3:2013 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 3: Sprayers for bush and tree crops
UNE-EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
UNE-EN 10305-3:2016 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
UNE-EN ISO 17296-4:2017 Additive manufacturing - General principles - Part 4: Overview of data processing (ISO 17296-4:2014)
ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
UNE-EN 12561-6:2012 Railway applications - Tank wagons - Part 6: Manholes
IEC 62217:2012 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
DIN EN 1337-4:2004-08 Structural bearings - Part 4: Roller bearings
BS EN ISO 8785:1999 Geometrical product specification (GPS). Surface imperfections. Terms, definitions and parameters
DIN EN 10305-5:2016-08 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
ISO 7963:2006 Non-destructive testing — Ultrasonic testing —- Specification for calibration block No. 2
I.S. EN 1820:2005 ANAESTHETIC RESERVOIR BAGS
EN ISO 16859-3:2015 Metallic materials - Leeb hardness test - Part 3: Calibration of reference test blocks (ISO 16859-3:2015)
EN ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010)
EN ISO 14923:2003 Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003)
EN 13886:2005+A1:2010 Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements
EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
EN 50262 : 1998 AMD 2 2004 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
UNI EN 14655 : 2010 FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13288 : 2010 FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN ISO 21182 : 2013 LIGHT CONVEYOR BELTS - DETERMINATION OF THE COEFFICIENT OF FRICTION
UNI EN ISO 5981 : 2008 RUBBER OR PLASTICS-COATED FABRICS - DETERMINATION OF RESISTANCE TO COMBINED SHEAR FLEXING AND RUBBING
UNI EN 12722 : 2013 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT
UNI EN 12854 : 2010 FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13621 : 2010 FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13886 : 2010 FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS
UNI EN ISO 8503-1 : 2012 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 1: SPECIFICATIONS AND DEFINITIONS FOR ISO SURFACE PROFILE COMPARATORS FOR THE ASSESSMENT OF ABRASIVE BLAST-CLEANED SURFACES
UNI EN ISO 2431 : 2012 PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS
UNI EN 13954 : 2010 FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13208 : 2010 FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1337-2 : 2004 STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS
UNI EN 13231-3 : 2012 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK
UNI EN 12852 : 2010 FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13871 : 2014 FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13083 : 2013 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
UNI EN ISO 7539-1 : 2013 CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 1: GENERAL GUIDANCE ON TESTING PROCEDURES
UNI EN 13389 : 2010 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12952-3 : 2012 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER
UNI EN 12851 : 2010 FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS
UNI EN ISO 8503-4 : 2012 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 4: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE - STYLUS INSTRUMENT PROCEDURE
UNI EN ISO 20482 : 2014 METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST
UNI EN 12043 : 2015 FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN ISO 14159 : 2008 SAFETY OF MACHINERY - HYGIENE REQUIREMENTS FOR THE DESIGN OF MACHINERY
UNI EN 12984 : 2010 FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 10049 : 2014 MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS
UNI EN 13951 : 2012 LIQUID PUMPS - SAFETY REQUIREMENTS - AGRIFOODSTUFFS EQUIPMENT - DESIGN RULES TO ENSURE HYGIENE IN USE
UNI EN 1678 : 2010 FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13885 : 2010 FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13534 : 2010 FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS
EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014)
UNI EN 454 : 2015 FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12041 : 2015 FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN ISO 21534 : 2009 NON-ACTIVE SURGICAL IMPLANTS - JOINT REPLACEMENT IMPLANTS - PARTICULAR REQUIREMENTS
UNI EN ISO 21179 : 2013 LIGHT CONVEYOR BELTS - DETERMINATION OF THE ELECTROSTATIC FIELD GENERATED BY A RUNNING LIGHT CONVEYOR BELT
UNI EN 13081 : 2012 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
ONORM EN ISO 12179 : 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS
UNI EN 1820 : 2009 ANAESTHETIC RESERVOIR BAGS
UNI EN 1916 : 2004 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED
UNI EN 12561-6 : 2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
UNI EN 12853 : 2010 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12721 : 2013 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT
UNI EN 12355 : 2010 FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13570 : 2010 FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13591 : 2010 FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN ISO 12780-2:2012 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
UNE-EN 13231-4:2014 Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings
ISO 6263:2013 Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces
13/30288815 DC : 0 BS EN 61914 - CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
DIN EN 16701:2015-04 ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY
DIN EN ISO 16119-3:2013-09 AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 3: SPRAYERS FOR BUSH AND TREE CROPS (ISO 16119-3:2013)
DIN ISO 23519 E : 2015 SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - MEASUREMENT OF SURFACE ROUGHNESS (ISO 23519:2010)
DIN EN ISO 25178-601:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
ISO 9982:1998 Belt drives Pulleys and V-ribbed belts for industrial applications PH, PJ, PK, PL and PM profiles: dimensions
UNI ISO 3384 : 2009 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES
BS ISO 4211-3:2013 Furniture. Tests for surface finishes Assessment of resistance to dry heat
I.S. CEN ISO TS 12780-2:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
BS EN 61386-25:2011 Conduit systems for cable management Particular requirements. Conduit fixing devices
ISO 3290-2:2014 Rolling bearings Balls Part 2: Ceramic balls
BS EN ISO 12181-2:2011 Geometrical product specifications (GPS). Roundness Specification operators
I.S. EN ISO 25178-605:2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS (ISO 25178-605:2014)
I.S. EN 16282-8:2017 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF AEROSOL - REQUIREMENTS AND TESTING
PREN 17180 : DRAFT 2017 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING
DIN EN ISO 14644-9:2012-12 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)
14/30261577 DC : 0 BS EN ISO 9013 - THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES
BS ISO 9085:2002 Calculation of load capacity of spur and helical gears. Application for industrial gears
11/30205376 DC : 0 BS EN ISO 25178-605 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS
UNI EN ISO 1133-1 : 2012 PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD
ISO 22215:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for tensile creep of monolithic ceramics
ISO 11952:2014 Surface chemical analysis Scanning-probe microscopy Determination of geometric quantities using SPM: Calibration of measuring systems
BS ISO 15324 : 2000 CORROSION OF METALS AND ALLOYS - EVALUATION OF STRESS CORROSION CRACKING BY THE DROP EVAPORATION TEST
02/207432 DC : DRAFT JUN 2002 IEC 62217. ED.1.0 - CREATION OF A COMMON CLAUSE STANDARD FOR COMPOSITE INSULATORS
BS ISO 5597:2010 Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
PREN 14420-2 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL
BS ISO 6336-2:2006 Calculation of load capacity of spur and helical gears Calculation of surface durability (pitting)
12/30156938 DC : 0 BS EN 16452 - RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCKS
BS 3M 60:1998 Separable tube fittings for fluid systems, 24° cone. General specification
ISO 4211-2:2013 Furniture — Tests for surface finishes — Part 2: Assessment of resistance to wet heat
ISO/IEC 8484:2014 Information technology Magnetic stripes on savingsbooks
ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures
I.S. EN 623-4:2004 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GENERAL AND TEXTURAL PROPERTIES - PART 4: DETERMINATION OF SURFACE ROUGHNESS
DIN EN ISO 12780-2:2011-07 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
BS ISO 16589-2:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements Vocabulary
BS ISO 13473-3:2002 Characterization of pavement texture by use of surface profiles Specification and classification of profilometers
BS ISO 13628-7 : 2005 AMD 16887 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS
BS EN 61914:2016 Cable cleats for electrical installations
14/30304003 DC : 0 BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES
BS ISO/IEC 7811-8:2014 Identification cards. Recording technique Magnetic stripe. Coercivity of 51,7 kA/m (650 Oe)
16/30336440 DC : DRAFT MAR 2016 BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
02/120925 DC : DRAFT MAR 2002 ISO/DIS 11443 - PLASTICS - DETERMINATION OF THE FLUIDITY OF PLASTICS USING CAPILLARY AND SLIT-DIE RHEOMETERS
14/30266796 DC : 0 BS EN ISO 1514 - PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING
16/30322243 DC : 0 BS EN 14535-1 - RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 1: BRAKE DISCS PRESSED OR SHRUNK ONTO THE AXLE OR DRIVE SHAFT, DIMENSIONS AND QUALITY REQUIREMENTS
13/30283636 DC : 0 BS ISO 13179-1 - IMPLANTS FOR SURGERY - PLASMA-SPRAYED UNALLOYED TITANIUM COATINGS ON SURGICAL IMPLANTS - PART 1: GENERAL REQUIREMENTS
04/30125833 DC : DRAFT NOV 2004 ISO 22215 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR TENSILE CREEP OF MONOLITHIC CERAMICS
09/30183435 DC : 0 BS EN ISO 1133-1 - PLASTICS DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD
13/30281710 DC : 0 BS EN 62444 - CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
BS EN 16282-3:2016 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation ceilings; design and safety requirements
DIN EN ISO 16859-3 E : 2016 METALLIC MATERIALS - LEEB HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE TEST BLOCKS (ISO 16859-3:2015)
BS ISO 10766:2014 Hydraulic fluid power. Cylinders. Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
15/30325003 DC : 0 BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
BS EN ISO 15324:2008 Corrosion of metals and alloys. Evaluation of stress corrosion cracking by the drop evaporation test
BS ISO/TR 10064-4:1998 Code of inspection practice Recommendations relative to surface texture and tooth contact pattern checking
UNE-EN 10310:2011 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
BS ISO 18669-2:2004 Internal combustion engines. Pistons pins Inspection measuring principles
07/30154358 DC : DRAFT AUG 2007 DD ISO/TS 25178-6 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: ARIAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE
DIN EN ISO 25178-6:2010-06 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010)
11/30241728 DC : DRAFT MAR 2011 BS EN ISO 13287 - PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE
BS ISO 8364:2017 Alpine skis and bindings. Binding mounting area. Requirements and test methods
I.S. EN ISO 16119-3:2013 AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 3: SPRAYERS FOR BUSH AND TREE CROPS (ISO 16119-3:2013)
BS EN ISO 14638:2015 Geometrical product specifications (GPS). Matrix model
BS EN 50368:2003 Cable cleats for electrical installations
BS ISO 3601-2:2016 Fluid power systems. O-rings Housing dimensions for general applications
PREN 13870 : DRAFT 2013 FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 16610-1:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015)
15/30288130 DC : 0 BS EN ISO 11114-4 - TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT
BS ISO 13565-1 : 1996 AMD 9949 GEOMETRIC PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - FILTERING AND GENERAL MEASUREMENT CONDITIONS
12/30252148 DC : 0 BS ISO 17440 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED STEEL HOOKS
BS EN ISO 1133-1:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method
08/30184303 DC : DRAFT SEP 2008 BS EN 12952-3 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS
03/314804 DC : DRAFT SEP 2003 BS ISO 6336-3 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 3: CALCULATION OF TOOTH BENDING STRENGTH
BS ISO 12176-1:2017 Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems Butt fusion
14/30272886 DC : 0 BS ISO 17841 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR THERMAL FATIGUE OF FINE CERAMICS SUBSTRATE
17/30337243 DC : DRAFT SEP 2017 BS ISO 21113 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMIC THIN PLATES AT ROOM TEMPERATURE
13/30263156 DC : 0 BS EN ISO 16859-3 - METALLIC MATERIALS - LEEB HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE TEST BLOCKS
11/30217705 DC : 0 BS ISO 14627 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE RESISTANCE OF SILICON NITRIDE MATERIALS FOR ROLLING BEARING BALLS AT ROOM TEMPERATURE BY INDENTATION FRACTURE METHOD
DIN EN 16281:2013-04 CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
BS ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for conductivity measurement of ion-conductive fine ceramics Oxide-ion-conducting solid electrolytes
ISO/IEC 22050:2002 Information technology Data interchange on 12,7 mm, 384-track magnetic tape cartridges Ultrium-1 format
DD ISO/TS 17450-2:2002 Geometrical product specifications (GPS). General concepts Basic tenets, specifications,operators and uncertainties
BS EN 62276:2016 Single crystal wafers for surface acoustic wave (SAW) device applications. Specifications and measuring methods
BS EN ISO 16859-3:2015 Metallic materials. Leeb hardness test Calibration of reference test blocks
BS ISO 20808:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
BS ISO 17440:2014 Cranes. General design. Limit states and proof of competence of forged steel hooks
BS EN ISO 16119-4:2014 Agricultural and forestry machinery. Environmental requirements for sprayers Fixed and semi-mobile sprayers
15/30324991 DC : 0 BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
12/30260299 DC : 0 BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
12/30235298 DC : DRAFT JAN 2012 BS EN 50526-2 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES
10/30234634 DC : 0 BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
BS EN 16282-2:2016 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation hoods; design and safety requirements
09/30198161 DC : 0 BS EN ISO 12780-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
09/30201494 DC : 0 BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES
PD ISO/TR 6336-30:2017 Calculation of load capacity of spur and helical gears Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5
BIS IS/ISO 6621-2 : 2003(R2014) INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 2: INSPECTION MEASURING PRINCIPLES
ISO/TS 16610-1:2006 Geometrical product specifications (GPS) Filtration Part 1: Overview and basic concepts
BS EN 50262:1999 Cable glands for electrical installations
I.S. EN ISO 14638:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
ISO 12891-2:2014 Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants
02/122388 DC : DRAFT JUN 2002 ISO/DIS 7743 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES
BS ISO 6195:2013 Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances
04/30109196 DC : DRAFT FEB 2004 EN 14879 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
BS ISO/IEC 8484:2014 Information technology. Magnetic stripes on savingsbooks
08/30185056 DC : DRAFT SEP 2008 BS EN 15861 - FOOD PROCESSING MACHINERY - SMOKE FACILITIES - SAFETY AND HYGIENE REQUIREMENTS
BS EN ISO 21534:2009 Non-active surgical implants. Joint replacement implants. Particular requirements
04/30114371 DC : DRAFT JUN 2004 EN 10339 - STEEL TUBES FOR ONSHORE AND OFFSHORE WATER PIPELINES - INTERNAL LIQUID APPLIED EPOXY LININGS FOR CORROSION PROTECTION
CSA ISO/IEC 8484 : 2015 INFORMATION TECHNOLOGY - MAGNETIC STRIPES ON SAVINGSBOOKS
BS EN 71-1 : 2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
DIN ISO 7743:2016-08 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES (ISO 7743:2011)
BS A 328-2:1999 Accessory drives and mounting flanges (Metric sizes) Dimensions
ISO 5362:2006 Anaesthetic reservoir bags
AWS C4.6M:2006(R2012) THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES
ISO 10817-1:1998 Rotating shaft vibration measuring systems Part 1: Relative and absolute sensing of radial vibration
UNE-EN ISO 16119-4:2015 Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014)
DIN EN 15166 E : 2010 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
BS ISO 17841:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal fatigue of fine ceramics substrate
DIN ISO 815-1:2016-09 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures (ISO 815-1:2014)
BS ISO 7206-2 : 2011 IMPLANTS FOR SURGERY - PARTIAL AND TOTAL HIP JOINT PROSTHESES - PART 2: ARTICULATING SURFACE MADE OF METALLIC, CERAMIC AND PLASTICS MATERIALS
SAE AS 27195 : 2014 SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-R-7362
BS EN ISO 13287:2012 Personal protective equipment. Footwear. Test method for slip resistance
ISO 5599-2:2001 Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector
UNI EN ISO 27509 : 2013 PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING
UNE-EN ISO 25178-601:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
I.S. EN 16701:2014 ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY
I.S. EN 60099-8:2011 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
I.S. EN 62217:2013 POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA (IEC 62217:2012 (EQV))
BS IEC 62899-201 : 2016 PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES
I.S. EN ISO 21534:2009 NON-ACTIVE SURGICAL IMPLANTS - JOINT REPLACEMENT IMPLANTS - PARTICULAR REQUIREMENTS
ISO 17841:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for thermal fatigue of fine ceramics substrate
I.S. EN 438-2:2016 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
ISO 4211-3:2013 Furniture — Tests for surface finishes — Part 3: Assessment of resistance to dry heat
UNI EN ISO 14644-9 : 2012 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 9: CLASSIFICATION OF SURFACE CLEANLINESS BY PARTICLE CONCENTRATION
I.S. EN 16282-4:2016 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS - DESIGN AND SAFETY REQUIREMENTS
I.S. EN ISO 25178-604:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013)
I.S. EN 50526-1:2012 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
ISO 22214:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for cyclic bending fatigue of monolithic ceramics at room temperature
ISO 13473-3:2002 Characterization of pavement texture by use of surface profiles — Part 3: Specification and classification of profilometers
EN 1092-1:2018 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
ISO 7368:2016 Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities
DIN EN ISO 15630-3:2011-02 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
I.S. EN ISO 25178-603:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013)
PREN 454 : DRAFT 2011 FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
PREN 12042 : DRAFT 2011 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN ISO 16119-3:2013 Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013)
BIS IS 6885-3 : 2011 METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS
DIN EN 438-2:2016-06 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
EN 16452:2015 Railway applications - Braking - Brake blocks
ISO 16589-2:2001 Rotary shaft lip-type seals incorporating thermoplastic sealing elements Part 2: Vocabulary
ISO 17092:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions
I.S. EN ISO 25178-601:2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
UNE-EN 14423:2014 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
ISO 14654:1999 Epoxy-coated steel for the reinforcement of concrete
ISO 18899:2013 Rubber — Guide to the calibration of test equipment
EN ISO 14607:2018 Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607:2018, Corrected version 2018-08)
ISO/TS 10993-19:2006 Biological evaluation of medical devices Part 19: Physico-chemical, morphological and topographical characterization of materials
ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity measurement of ion-conductive fine ceramics — Part 1: Oxide-ion-conducting solid electrolytes
ISO 21809-4:2009 Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 4: Polyethylene coatings (2-layer PE)
ISO 14610:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of porous ceramics at room temperature
EN ISO 15630-3:2010 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010)
I.S. EN ISO 12780-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
I.S. EN ISO 7963:2010 NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR CALIBRATION BLOCK NO. 2
UNE-EN ISO 16859-1:2016 Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015)
I.S. EN ISO 25178-701:2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS
I.S. EN ISO 6507-3:2018 METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6507-3:2018)
I.S. EN 71-1:2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
I.S. EN 62276:2016 SINGLE CRYSTAL WAFERS FOR SURFACE ACOUSTIC WAVE (SAW) DEVICE APPLICATIONS - SPECIFICATIONS AND MEASURING METHODS
ISO 16873:2011 Hydraulic fluid power — Pressure switches — Mounting surfaces
I.S. EN 15166:2008 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 62155:2003 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
ISO 8364:2017 Alpine skis and bindings — Binding mounting area — Requirements and test methods
ISO 3290-1:2014 Rolling bearings Balls Part 1: Steel balls
UNE-EN ISO 2431:2012 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011)
DIN EN ISO 2431:2012-03 PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS (ISO 2431:2011)
DIN EN 1092-3:2004-10 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004
DIN EN 1337-2 E : 2004 STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS
DIN EN 10049:2014-03 Measurement of roughness average Ra and peak count RPc on metallic flat products
DIN EN 13886:2011-02 Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 14653-1:2005-07 MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 1: PRODUCT SPECIFICATIONS
ISO/TS 12181-2:2003 Geometrical Product Specifications (GPS) Roundness Part 2: Specification operators
BS EN ISO 9013:2017 Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances
BS EN 1092-4:2002 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Aluminium alloy flanges
BS EN ISO 14159:2008 Safety of machinery. Hygiene requirements for the design of machinery
BS EN 13885 : 2005 FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN ISO 2431:2011 Paints and varnishes. Determination of flow time by use of flow cups
UNE-EN 14655:2006 Food processing machinery - Baguette slicers - Safety and hygiene requirements
BS EN 13555:2014 Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
UNE-EN 13081:2009 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
ISO 16610-1:2015 Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts
BS EN 12284:2003 Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
ISO 25178-603:2013 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
BS EN 453:2014 Food processing machinery. Dough mixers. Safety and hygiene requirements
BS EN ISO 22088-4:2006 Plastics. Determination of resistance to environmental stress cracking (ESC) Ball or pin impression method
BS EN 1759-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated Copper alloy flanges
BS EN 13311-1:2001 Biotechnology. Performance criteria for vessels General performance criteria
BS EN 13389 : 2005 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
ISO 7539-1:2012 Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures
BS EN 1724:1999 Light conveyor belts. Test method for the determination of the coefficient of friction
BS EN ISO 13628-7:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems
BS EN 1071-2:2002 Advanced technical ceramics. Methods of test for ceramic coatings Determination of coating thickness by the crater grinding method
BS EN ISO 13565-2:1998 Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Height characterization using the linear material ration curve
BS EN 13621 : 2004 FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 13871:2014 Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements
DIN EN ISO 21182:2013-09 LIGHT CONVEYOR BELTS - DETERMINATION OF THE COEFFICIENT OF FRICTION (ISO 21182:2013)
ISO 21534:2007 Non-active surgical implants Joint replacement implants Particular requirements
BS EN 1820:2005 Anaesthetic reservoir bags
ISO 25178-605:2014 Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments
ISO 14635-2:2004 Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
ISO 13628-7:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems
ISO 14635-3:2005 Gears — FZG test procedures — Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
ISO 9085:2002 Calculation of load capacity of spur and helical gears — Application for industrial gears
BS EN 12462:1998 Biotechnology. Performance criteria for pumps
UNE-EN 13231-3:2013 Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track
UNE-EN ISO 14577-3:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
BS EN ISO 11114-4:2005 Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents Test methods for selecting metallic materials resistant to hydrogen embrittlement
UNE-EN 12722:2009 Furniture - Assessment of surface resistance to dry heat
BS EN 10305-6:2016 Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes for hydraulic and pneumatic power systems
BS EN 13287:2004 Safety, protective and occupational footwear for professional use. Test method for slip resistance
UNE-EN 13083:2009 Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure
BS EN 13208 : 2003 FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 13288:2006 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
BS EN 13081 : 2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
BS EN 1674:2015 Food processing machinery. Dough sheeters. Safety and hygiene requirements
BS EN ISO 295:2004 Plastics. Compression moulding of test specimens of thermosetting materials
UNE-EN 50526-2:2014 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices
BS EN 10339:2007 Steel tubes for onshore and offshore water pipelines. Internal liquid applied epoxy linings for corrosion protection
UNE-EN 10305-2:2016 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
UNE-EN 13951:2012 Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use
ISO 11114-4:2017 Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
BS EN 13083 : 2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
ISO 14644-9:2012 Cleanrooms and associated controlled environments Part 9: Classification of surface cleanliness by particle concentration
BS EN 12390-4:2000 Testing hardened concrete Compressive strength. Specification for testing machines
ISO 17450-2:2012 Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
BS EN 1337-6:2004 Structural bearings Rocker bearings
BS EN 12761-2:2001 Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection Field crop sprayers
UNE-EN ISO 1514:2017 Paints and varnishes - Standard panels for testing (ISO 1514:2016)
BS EN ISO 1133:2005 Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
UNE-EN ISO 6506-3:2015 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014)
BS EN 13288 : 2005 FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN ISO 14577-1:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)
ISO 14577-4:2016 Metallic materials Instrumented indentation test for hardness and materials parameters Part 4: Test method for metallic and non-metallic coatings
UNE-EN 61400-4:2013 Wind turbines - Part 4: Design requirements for wind turbine gearboxes
ISO 13565-3:1998 Geometrical Product Specifications (GPS) Surface texture: Profile method; Surfaces having stratified functional properties Part 3: Height characterization using the material probability curve
BS EN 12041:2014 Food processing machinery. Moulders. Safety and hygiene requirements
UNE-EN 454:2015 Food processing machinery - Planetary mixers - Safety and hygiene requirements
ISO 16119-4:2014 Agricultural and forestry machinery Environmental requirements for sprayers Part 4: Fixed and semi-mobile sprayers
ISO 3384:2005 Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression at ambient and at elevated temperatures
ISO 293:2004 Plastics — Compression moulding of test specimens of thermoplastic materials
IEC 60099-4:2014 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
ISO 14923:2003 Thermal spraying Characterization and testing of thermally sprayed coatings
ISO 13287:2012 Personal protective equipment Footwear Test method for slip resistance
BS EN 12761-3:2001 Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection Air-assisted sprayers for bush and tree crops
IEC 61914 : 2.0:2015 CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
ISO 25178-604:2013 Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
ISO 5981:2007 Rubber- or plastics-coated fabrics Determination of resistance to combined shear flexing and rubbing
ISO 17296-4:2014 Additive manufacturing General principles Part 4: Overview of data processing
DIN EN ISO 21179:2013-09 LIGHT CONVEYOR BELTS - DETERMINATION OF THE ELECTROSTATIC FIELD GENERATED BY A RUNNING LIGHT CONVEYOR BELT (ISO 21179:2013)
BS EN ISO 13565-1:1998 Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Filtering and general measurement conditions
BS EN ISO 5981:2007 Rubber or plastics-coated fabrics. Determination of resistance to combined shear flexing and rubbing
ISO/TS 12780-2:2003 Geometrical Product Specifications (GPS) Straightness Part 2: Specification operators
ISO 14638:2015 Geometrical product specifications (GPS) Matrix model
ISO 8785:1998 Geometrical Product Specification (GPS) — Surface imperfections — Terms, definitions and parameters
ISO 20482:2013 Metallic materials — Sheet and strip — Erichsen cupping test
ISO 1133:2005 Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
BS EN 10305-3:2016 Steel tubes for precision applications. Technical delivery conditions Welded cold sized tubes
BS EN 12331:2015 Food processing machinery. Mincing machines. Safety and hygiene requirements
ISO 6508-3:2015 Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks
BS EN ISO 293 : 2005 PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS
BS EN 13951:2012 Liquid pumps. Safety requirements. Agrifoodstuffs equipment; Design rules to ensure hygiene in use
ISO 14577-1:2015 Metallic materials Instrumented indentation test for hardness and materials parameters Part 1: Test method
ISO 295:2004 Plastics — Compression moulding of test specimens of thermosetting materials
ISO 14577-3:2015 Metallic materials Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks
ISO 9013:2017 Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances
ISO 5436-1:2000 Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 1: Material measures
ISO 25178-6:2010 Geometrical product specifications (GPS) Surface texture: Areal Part 6: Classification of methods for measuring surface texture
UNE-EN 12721:2009 Furniture - Assessment of surface resistance to wet heat
BS EN 10305-1:2016 Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes
UNE-EN 13591:2006 Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements
BS EN 1759-1:2004 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24
BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters Calibration of reference blocks
BS EN 13870:2015 Food processing machinery. Portion cutting machines. Safety and hygiene requirements
BS EN 12560-5:2001 Flanges and their joints. Gaskets for Class-designated flanges Metallic ring joint gaskets for use with steel flanges
UNE-EN ISO 20482:2014 Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013)
UNE-EN 13389:2006 Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements.
UNE-EN 13871:2015 Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements
ISO 21179:2013 Light conveyor belts — Determination of the electrostatic field generated by a running light conveyor belt
BS EN 12020-1:2008 Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Technical conditions for inspection and delivery
UNE-EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012)
BS EN ISO 7539-1:2012 Corrosion of metals and alloys. Stress corrosion testing General guidance on testing procedures
ISO 25178-602:2010 Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
UNE-EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016)
IEC 61386-25:2011 Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices
BS EN 13591 : 2005 FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-ISO 7743:2016 Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
ISO 16859-3:2015 Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks
ISO 14159:2002 Safety of machinery — Hygiene requirements for the design of machinery
BS EN ISO 14577-1:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters Test method
BS EN 1092-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Copper alloy flanges
ISO 25178-606:2015 Geometrical product specification (GPS) — Surface texture: Areal — Part 606: Nominal characteristics of non-contact (focus variation) instruments
UNE-EN 13870:2016 Food processing machinery - Portion cutting machines - Safety and hygiene requirements
UNE-EN 12952-3:2012 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
ISO 12179:2000 Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments
BS EN 12854 : 2003 FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS
ISO 6506-3:2014 Metallic materials Brinell hardness test Part 3: Calibration of reference blocks
ISO 16859-1:2015 Metallic materials — Leeb hardness test — Part 1: Test method
BS EN 1672-2 : 2005 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS
ISO 22088-4:2006 Plastics Determination of resistance to environmental stress cracking (ESC) Part 4: Ball or pin impression method
DIN EN ISO 14577-4:2017-04 METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016)
EN 62276:2016 Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods
UNI EN 12020-1 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
EN ISO 16610-1:2015 Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015)
EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017)
EN 12721:2009+A1:2013 FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT
EN ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015)
EN 13885:2005+A1:2010 Food processing machinery - Clipping machines - Safety and hygiene requirements
EN 1724 : 1998 COR 1999 LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE COEFFICIENT OF FRICTION
I.S. EN ISO 12179:2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS
EN ISO 1133:2005 PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS
I.S. EN ISO 13565-2:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO
ENV 13287:2002/AC:2003 SAFETY, PROTECTIVE AND OCCUPATIONAL FOOTWEAR FOR PROFESSIONAL USE - TEST METHOD FOR THE DETERMINATION OF SLIP RESISTANCE
EN ISO 5981:2007 Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing (ISO 5981:2007)
EN 623-4:2004 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness
EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012)
EN 13951:2012 Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use
EN 16701:2014 Energetic materials for defence - Safety, vulnerability - Friability
EN 12984:2005+A1:2010 Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements
EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
EN 12020-1:2008 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery
EN 1820:2005+A1:2009 Anaesthetic reservoir bags (ISO 5362:2000, modified)
EN ISO 16119-4:2014 Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014)
EN ISO 22088-4:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006)
EN ISO 14880-4:2006 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2006)
EN 13591:2005+A1:2009 Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements
EN 453:2014 Food processing machinery - Dough mixers - Safety and hygiene requirements
EN ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
EN 454:2014 Food processing machinery - Planetary mixers - Safety and hygiene requirements
EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
EN ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
EN ISO 21182:2013 Light conveyor belts - Determination of the coefficient of friction (ISO 21182:2013)
EN ISO 3274 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
EN ISO 13628-7:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005)
EN 13621:2004+A1:2010 Food processing machinery - Salad dryers - Safety and hygiene requirements
EN 13954:2005+A1:2010 Food processing machinery - Bread slicers - Safety and hygiene requirements
EN 15166:2008 Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements
EN ISO 5436-1 : 2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 1: MATERIAL MEASURES
EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
EN ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017)
EN 1092-4:2002 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
EN 14653-1:2005 Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications
EN ISO 21179:2013 Light conveyor belts - Determination of the electrostatic field generated by a running light conveyor belt (ISO 21179:2013)
EN ISO 8785 : 1999 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE IMPERFECTIONS - TERMS, DEFINITIONS AND PARAMETERS
EN 13981-1:2003 Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products
EN ISO 1514:2016 Paints and varnishes - Standard panels for testing (ISO 1514:2016)
EN ISO 25178-70 : 2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012)
EN ISO 15732 : 2005 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY SINGLE EDGE PRECRACKED BEAM (SEPB) METHOD (ISO 15732:2003)
EN 13871:2014 Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements
EN 15165:2014 Food processing machinery - Forming machines - Safety and hygiene requirements
EN ISO 14577-4:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016)
EN 15183:2006 Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test
EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
EN ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)
EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)
EN 16281:2013 Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods
EN ISO 25178-601 : 2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
EN ISO 20482:2013 Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013)
EN ISO 16859-1:2015 Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015)
EN 1674:2015 Food processing machinery - Dough sheeters - Safety and hygiene requirements
EN ISO 14159:2008 Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002)
EN 16743:2016 Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements
EN ISO 2431:2011 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011)
EN ISO 17450-2:2012 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
EN 1759-3:2003/AC:2004 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY FLANGES
EN 1759-4:2003 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges
EN ISO 25178-603:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013)
EN ISO 13565-1 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 1: FILTERING AND GENERAL MEASUREMENT CONDITIONS
EN ISO 295 : 2004 PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOSETTING MATERIALS
EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013)
EN 14655:2005+A1:2010 Food processing machinery - Baguette slicers - Safety and hygiene requirements
I.S. EN ISO 4288:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
EN 13390:2002+A1:2009 Food processing machinery - Pie and tart machines - Safety and hygiene requirements
I.S. EN ISO 13565-3:2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE -PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE
EN ISO 15324:2008 Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test (ISO 15324:2000)
EN ISO 7539-1:2012 Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:2012)
EN 1678:1998+A1:2010 Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements
EN 12851:2005+A1:2010 Food processing machinery - Catering attachments for machines having an auxiliary drive hub - Safety and hygiene requirements
EN 16282-8:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 8: Installations for treatment of aerosol; Requirements and testing
UNE-EN 50526-1:2012 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters
ISO 18535:2016 Diamond-like carbon films Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
ISO 28703:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for thermal-shock resistance of porous ceramics
12/30265041 DC : 0 BS EN ISO 16946 - NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR STEP WEDGE CALIBRATION BLOCK
DIN EN 16701 E : 2015 ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY
BS ISO 14654:1999 Epoxy-coated steel for the reinforcement of concrete
DIN EN ISO 25178-604:2013-12 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013)
UNI EN ISO 16119-2 : 2013 AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 2: HORIZONTAL BOOM SPRAYERS
04/30126837 DC : DRAFT DEC 2004 BS ISO 6336-1 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 1: BASIC PRINCIPLES, INTRODUCTION AND GENERAL INFLUENCE FACTORS
BS ISO 23519:2010 Sintered metal materials, excluding hardmetals. Measurement of surface roughness
BS ISO 21809-4:2009 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyethylene coatings (2-layer PE)
11/30212259 DC : 0 BS ISO 14610 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FLEXURAL STRENGTH OF POROUS CERAMICS AT ROOM TEMPERATURE
BS ISO 19606:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for surface roughness of fine ceramic films by atomic force microscopy
INCITS/ISO/IEC 8484 : 2008 INFORMATION TECHNOLOGY - MAGNETIC STRIPES ON SAVINGSBOOKS
DIN ISO 23519:2015-12 SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - MEASUREMENT OF SURFACE ROUGHNESS (ISO 23519:2010)
ECMA 319 : 1ED 2001 DATA INTERCHANGE ON 12,7 MM - 384-TRACK MAGNETIC TAPE CARTRIDGES - ULTRIUM-1 FORMAT
DIN ISO 3384-1 E : 2015 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE (ISO 3384-1:2011 + AMD.1:2013)
10/30234867 DC : 0 BS ISO 12176-1 - PLASTICS PIPES AND FITTINGS - EQUIPMENT FOR FUSION JOINTING POLYETHYLENE SYSTEMS - PART 1: BUTT FUSION
DIN EN ISO 25178-602:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
12/30258949 DC : 0 BS ISO 16610-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS
18/30346200 DC : DRAFT APR 2018 BS ISO 21618 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE RESISTANCE OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY INDENTATION FRACTURE (IF) METHOD
ISO 17744:2004 Plastics — Determination of specific volume as a function of temperature and pressure (pvT diagram) — Piston apparatus method
UNE-EN 62217:2013 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
CSA ISO/IEC 7811-2 : 2002 : R2015 IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 2: MAGNETIC STRIPE - LOW COERCIVITY
DIN EN ISO 12181-2:2011-07 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
BS ISO 10817-1:1999 Rotating shaft vibration measuring systems Relative and absolute sensing of radial vibration
DIN EN ISO 14638:2015-12 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
11/30243837 DC : 0 BS EN 62217 - POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
PREN 13289 : DRAFT 2015 PASTA PROCESSING PLANT - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
ISO 17170:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for spherical indentation of porous ceramics
I.S. EN 12042:2014 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
04/30112988 DC : DRAFT APR 2004 ISO 14635-3 - GEARS - FZG TEST PROCEDURES - FZG TEST METHOD A/2.8/50 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY AND WEAR CHARACTERISTICS OF SEMIFLUID GEAR GREASES
10/30215350 DC : 0 BS ISO 16873 - HYDRAULIC FLUID POWER - PRESSURE SWITCHES - MOUNTING SURFACES
09/30201486 DC : 0 BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
05/30142211 DC : DRAFT NOV 2005 ISO/IEC 15457-2 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 2: MAGNETIC RECORDING TECHNIQUE
DIN EN 15165 E : 2015 FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 4545-3:2015-05 (Draft) METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS
02/704943 DC : DRAFT APR 2002 PREN 10329 - STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
ASTM F 2664 : 2011 : REDLINE Standard Guide for Assessing the Attachment of Cells to Biomaterial Surfaces by Physical Methods
BS EN ISO 16610-1:2015 Geometrical product specifications (GPS). Filtration Overview and basic concepts
13/30252091 DC : 0 BS ISO 17170 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR SPHERE INDENTATION OF POROUS CERAMICS
07/30162947 DC : 0 BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
11/30210938 DC : 0 BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES
BS ISO 16873:2011 Hydraulic fluid power. Pressure switches. Mounting surfaces
03/105598 DC : DRAFT MAY 2003 BS ISO 18899 - RUBBER - GUIDE TO THE CALIBRATION OF TEST EQUIPMENT
08/30171709 DC : DRAFT JAN 2008 BS EN ISO 25178-701 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS
DIN EN ISO 16859-1:2016-02 METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD (ISO 16859-1:2015)
12/30246399 DC : 0 BS ISO 11749 - BELT DRIVE - V-RIBBED BELTS FOR THE AUTOMOTIVE INDUSTRY - FATIGUE TEST
ISO 6507-3:2018 Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
DIN ISO 3384-1:2015-12 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2011 + Amd.1:2013)
14/30299146 DC : 0 BS EN 16743 - FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 71-8:2018 Safety of toys Activity toys for domestic use
IEC 62444:2010 Cable glands for electrical installations
13/30286138 DC : 0 BS EN 16654 - CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED FINGER PROTECTION DEVICES FOR DOORS - SAFETY REQUIREMENTS AND TEST METHODS
BS ISO 9981:1998 Belt drives. Pulleys and V-ribbed belts for the automotive industry. PK profile:dimensions
10/30202064 DC : 0 BS ISO 7206-2 - IMPLANTS FOR SURGERY - PARTIAL AND TOTAL HIP JOINT PROSTHESES - PART 2: ARTICULATING SURFACES MADE OF METALLIC, CERAMIC AND PLASTICS MATERIALS
11/30247562 DC : 0 BS EN 12042 - FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 16610-1:2015-11 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015)
UNE-EN 16281:2013 Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods
DIN 3863:2003-08 COMPRESSION COUPLINGS - SPHERICAL LINERS - DESIGN AND TYPES OF PORT END U AND Y
ISO 7207-2:2011 Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials
UNE-EN 71-1:2015 Safety of toys - Part 1: Mechanical and physical properties
DIN EN 15129 E : 2010 ANTI-SEISMIC DEVICES
ISO 19631:2015 Aerospace series Tube fittings for fluid systems, 5 080 psi (35 000 kPa) Qualification specification
BS ISO 14610:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of porous ceramics at room temperature
BIS IS 1501-3 : 2013 METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS
BS ISO 6194-1:2007 Rotary shaft lip-type seals incorporating elastomeric sealing elements Nominal dimensions and tolerances
BS ISO 5599-1:2001 Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces without electrical connector
BS EN ISO 25178-6:2010 Geometrical product specifications (GPS). Surface texture. Areal Classification of methods for measuring surface texture
DIN EN ISO 16119-4 E : 2015 AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 4: FIXED AND SEMI-MOBILE SPRAYERS (ISO 16119-4:2014)
15/30324988 DC : 0 BS EN 10305-6 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
06/30094541 DC : DRAFT JUN 2006 ISO 21534 - NON-ACTIVE SURGICAL IMPLANTS - JOINT REPLACEMENT IMPLANTS - PARTICULAR REQUIREMENTS
UNE-EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
13/30274174 DC : 0 BS ISO 8133 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES
BS EN 13001-3-5:2016 Cranes. General design Limit states and proof of competence of forged hooks
BS EN 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
15/30328599 DC : 0 BS ISO 1099 - METALLIC MATERIALS - FATIGUE TESTING - AXIAL FORCE-CONTROLLED METHOD
13/30272530 DC : 0 BS ISO/IEC 7811-8 - IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 8: MAGNETIC STRIPE - COERCIVITY OF 51,7 KA/M (650 OE)
BS ISO 4288 : 96 AMD 9918 GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD: RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
07/30131694 DC : 0 BS ISO 6194-4 - ROTARY-SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 4: PERFORMANCE TEST PROCEDURES
BS EN ISO 25178-601:2010 Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of contact (stylus) instruments
ISO 18487-1:2017 Aerospace series — Titanium tube for 35 MPa operating pressure — Part 1: Inch series
BS ISO 3384:2005 Rubber, vulcanized or thermoplastic. Determination of stress relaxationi n compression at ambient and at elevated temperatures
BS ISO 4401:2005 Hydraulic fluid power. Four-port directional control valves. Mounting surfaces
UNE-EN 16452:2016 Railway applications - Braking - Brake blocks
08/30176943 DC : 0 BS ISO 23519 - SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - MEASUREMENT OF SURFACE ROUGHNESS
07/30139822 DC : 0
08/30174605 DC : DRAFT SEP 2008 BS ISO 5597 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES
CSA C62155 : 2006 : R2011 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
99/714207 DC : DRAFT SEP 1999 ISO/DIS 13091-1 - MECHANICAL VIBRATION - VIBROTACTILE PERCEPTION THRESHOLD FOR THE ASSESSMENT OF NERVE DYSFUNCTION - PART 1: TEST METHODS FOR MEASUREMENT AT THE FINGERTIPS
PREN 4833 : DRAFT 2017 AEROSPACE SERIES - PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING LOCKED FITTING - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH
NF EN 60099-8 : 2011 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
05/30130517 DC : DRAFT MAR 2005 ISO 12176-1 - PLASTICS PIPES AND FITTINGS - EQUIPMENT FOR FUSION-JOINTING POLYETHYLENE SYSTEMS - PART 1: BUTT FUSION
CEI EN 61386-25 : 2012 CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 25: PARTICULAR REQUIREMENTS - CONDUIT FIXING DEVICES
I.S. EN 61914:2016 CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
BIS IS 1586-3 : 2012 METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (SCALES, A, B, C, D, E, F, G, H, K, N, T)
I.S. EN 13001-3-3:2014 CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
ISO 7743:2017 Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties
CSA ISO/IEC 7811-2 : 2002 : R2011 IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 2: MAGNETIC STRIPE - LOW COERCIVITY
API 17G : 2006 : R2016 RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS
ASTM F 3129 : 2016 Standard Guide for Characterization of Material Loss from Conical Taper Junctions in Total Joint Prostheses
PREN 4836 : DRAFT 2017 AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH
DIN EN 13231-4:2013-06 Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings
CSA C22.2 No. 18.3 : 2012 : INC : UPD 1 : 2014 CONDUIT, TUBING, AND CABLE FITTINGS
CAN/CSA-ISO/IEC 22050-04 (R2012) Information Technology - Data Interchange on 12,7 mm, 384-Track Magnetic Tape Cartridges - Ultrium-1 Format (Adopted ISO/IEC 22050:2002, first edition, 2002-10-01)
ONORM EN ISO 4545-3 : 2006 METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS
ISO 11443:2014 Plastics Determination of the fluidity of plastics using capillary and slit-die rheometers
ISO 19487:2016 Metallic and other inorganic coatings — Electrodeposited nickel-ceramics composite coatings
ISO 17327-1:2018 Non-active surgical implants — Implant coating — Part 1: General requirements
I.S. EN ISO 1133-1:2011 PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD (ISO 1133-1:2011)
ISO/IEC 7811-2:2014 Identification cards Recording technique Part 2: Magnetic stripe Low coercivity
ISO/TS 16610-32:2009 Geometrical product specifications (GPS) — Filtration — Part 32: Robust profile filters: Spline filters
DIN EN ISO 14607:2009-08 NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS
I.S. EN ISO 25178-606:2015 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS (ISO 25178-606:2015)
ISO 4586-2:2015 High-pressure decorative laminates (HPL, HPDL) Sheets based on thermosetting resins (Usually called Laminates) Part 2: Determination of properties
BIS IS 1500-3 : 2013 METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS
ISO 15630-3:2010 Steel for the reinforcement and prestressing of concrete Test methods Part 3: Prestressing steel
ISO 19606:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for surface roughness of fine ceramic films by atomic force microscopy
ISO 13179-1:2014 Implants for surgery Plasma-sprayed unalloyed titanium coatings on metallic surgical implants Part 1: General requirements
I.S. EN 50526-2:2014 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES
CEI EN 50526-2 : 2014 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES
UNE-EN ISO 16859-3:2016 Metallic materials - Leeb hardness test - Part 3: Calibration of reference test blocks (ISO 16859-3:2015)
I.S. EN 71-8:2018 SAFETY OF TOYS - PART 8: ACTIVITY TOYS FOR DOMESTIC USE
UNE-ISO 815-1:2011 Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures
PREN 453 : DRAFT 2011 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 60099-4:2014 Surge arresters Metal-oxide surge arresters without gaps for a.c. systems
ISO/IEC 15457-2:2007 Identification cards — Thin flexible cards — Part 2: Magnetic recording technique
ISO 28704:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for cyclic bending fatigue of porous ceramics at room temperature
I.S. EN ISO 16119-2:2013 AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 2: HORIZONTAL BOOM SPRAYERS (ISO 16119-2:2013, CORRECTED VERSION 2017-03)
EN 71-1:2014 Safety of toys - Part 1: Mechanical and physical properties
NACE TM21423 : 2017 TEST METHOD FOR DETERMINATION OF SUBSTRATE AND SURFACE TEMPERATURE LIMITS FOR INSULATIVE COATINGS USED FOR PERSONNEL PROTECTION
ISO 12176-1:2017 Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
UNE-EN ISO 25178-701:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
UNI EN 13231-4 : 2013 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 4: ACCEPTANCE OF REPROFILING RAILS IN SWITCHES AND CROSSINGS
UNI EN 15166 : 2009 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN ISO 25178-603 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS
NF EN ISO 25178-6 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE
BS EN ISO 16119-2:2013 Agricultural and forestry machinery. Environmental requirements for sprayers Horizontal boom sprayers
UNI EN ISO 15324 : 2008 CORROSION OF METALS AND ALLOYS - EVALUATION OF STRESS CORROSION CRACKING BY THE DROP EVAPORATION TEST
CEI EN 60099-8 : 2012 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
SAE AS 5857 : 2010 GLAND DESIGN, O-RING AND OTHER ELASTOMERIC SEALS, STATIC APPLICATIONS
NF EN ISO 25178-601 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
I.S. EN 61386-25:2011 CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 25: PARTICULAR REQUIREMENTS - CONDUIT FIXING DEVICES (IEC 61386-25:2011)
BS EN 14423:2013+A2:2019 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
ISO 16119-2:2013 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 2: Horizontal boom sprayers
ISO 10110-8:2010 Optics and photonics Preparation of drawings for optical elements and systems Part 8: Surface texture; roughness and waviness
DIN EN ISO 15630-3 E : 2011 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
DIN EN 12952-3:2012-03 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
ISO 3601-2:2016 Fluid power systems — O-rings — Part 2: Housing dimensions for general applications
ISO 6194-2:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 2: Vocabulary
EN ISO 4545-3:2018 Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2017)
KTA 3201.3 : 2007(R2012) COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE
EN 12697-31:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor
IEC 62848-1:2016 Railway applications - DC surge arresters and voltage limiting devices - Part 1: Metal-oxide surge arresters without gaps
ISO 6194-1:2007 Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 1: Nominal dimensions and tolerances
I.S. EN ISO 4545-3:2018 METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 4545-3:2017)
ISO/IEC 7811-8:2014 Identification cards Recording technique Part 8: Magnetic stripe Coercivity of 51,7 kA/m (650 Oe)
ISO 14999-4:2015 Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of tolerances specified in ISO 10110
ISO/TR 10064-4:1998 Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking
I.S. EN ISO 25178-602:2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS
I.S. EN ISO 25178-6:2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE
UNE-EN 12463:2006 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements
UNI EN ISO 13287 : 2012 PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE
DIN EN 13555:2014-07 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
DIN EN 13390:2011-02 Food processing machinery - Pie and tart machines - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN 13621:2011-02 Food processing machinery - Salad dryers - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 13570:2011-02 Food processing machinery - Mixing machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12020-1:2008-06 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery
DIN EN ISO 11114-4:2015-08 (Draft) TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT (ISO 11114-4:2017)
DIN EN ISO 21182 E : 2013 LIGHT CONVEYOR BELTS - DETERMINATION OF THE COEFFICIENT OF FRICTION (ISO 21182:2013)
DIN EN ISO 8503-4:2012-06 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012)
DIN EN 13534:2011-02 Food processing machinery - Curing injection machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12561-6:2011-10 Railway applications - Tank wagons - Part 6: Manholes
DIN EN 1759-3:2004-10 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004
DIN EN ISO 8503-1:2013-05 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 1: SPECIFICATIONS AND DEFINITIONS FOR ISO SURFACE PROFILE COMPARATORS FOR THE ASSESSMENT OF ABRASIVE BLAST-CLEANED SURFACES (ISO 8503-1:2012)
DIN EN 1337-6 E : 2004 STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS
DIN EN 453:2015-04 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13871:2015-01 FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 3274:1998-04 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
BS EN 13981-1:2003 Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Extruded products
ISO 25178-601:2010 Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments
UNE-EN 1674:2015 Food processing machinery - Dough sheeters - Safety and hygiene requirements
ISO 12181-2:2011 Geometrical product specifications (GPS) Roundness Part 2: Specification operators
BS EN 12690:1999 Biotechnology. Performance criteria for shaft seals
BS EN 1759-4:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated Aluminium alloy flanges
BS EN ISO 15732:2005 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
BS EN 1916:2002 Concrete pipes and fittings, unreinforced, steel fibre and reinforced
BS EN 1071-1:2003 Advanced technical ceramics. Methods of test for ceramic coatings Determination of coating thickness by contact probe filometer
BS EN ISO 21182:2013 Light conveyor belts. Determination of the coefficient of friction
BS EN ISO 4545-3:2005 Metallic materials. Knoop hardness test Calibration of reference blocks
ISO 25178-701:2010 Geometrical product specifications (GPS) Surface texture: Areal Part 701: Calibration and measurement standards for contact (stylus) instruments
IEC 61264:1998 Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear
ISO 15324:2000 Corrosion of metals and alloys Evaluation of stress corrosion cracking by the drop evaporation test
BS EN ISO 6507-3:2005 Metallic materials. Vickers hardness test Calibration of reference blocks
BS EN 14653-1:2005 Manually operated hydraulic shoring systems for groundwork support Product specifications
BS EN ISO 21179:2013 Light conveyor belts. Determination of the electrostatic field generated by a running light conveyor belt
BS EN ISO 6508-3:2015 Metallic materials. Rockwell hardness test Calibration of reference blocks
BS EN ISO 14577-4:2016 Metallic materials. Instrumented indentation test for hardness and materials parameters Test method for metallic and non-metallic coatings
BS EN 12561-6:2011 Railway applications. Tank wagons Manholes
BS EN 13231-3:2012 Railway applications. Track. Acceptance of works Acceptance of reprofiling rails in track
BS EN ISO 6506-3:2014 Metallic materials. Brinell hardness test Calibration of reference blocks
ISO 27509:2012 Petroleum and natural gas industries Compact flanged connections with IX seal ring
BS EN 1337-4:2004 Structural bearings Roller bearings
BS EN ISO 12179:2001 Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments
ISO 15732:2003 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
BS EN 10305-4:2016 Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes for hydraulic and pneumatic power systems
ISO 12780-2:2011 Geometrical product specifications (GPS) Straightness Part 2: Specification operators
BS EN 14655 : 2005 FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
01/715268 DC : DRAFT NOV 2001 BS ISO 13628-7 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS
BS EN ISO 13565-3:2000 Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Height characterization using the material probability curve
BS EN 13390 : 2002 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12851 : 2005 FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12952-3:2011 Water-tube boilers and auxiliary installations Design and calculation for pressure parts of the boiler
ONORM EN ISO 13287 : 2013 PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE (ISO 13287:2012)
BS EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
ISO 1514:2016 Paints and varnishes — Standard panels for testing
ISO 14880-4:2006 Optics and photonics — Microlens arrays — Part 4: Test methods for geometrical properties
ISO 16946:2017 Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block
EN 12853:2001+A1:2010/AC:2010 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
EN 50526-2:2014 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices
EN 12761-2:2001 Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors - Environmental protection - Part 2: Field crop sprayers
CEN/TS 16165:2016 Determination of slip resistance of pedestrian surfaces - Methods of evaluation
EN 13288:2005+A1:2009 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
EN 13287:2004 Personal protective equipment - Footwear - Test method for slip resistance
EN 10305-1:2016 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
CEN/TS 13001-3-5:2010 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
EN 61914:2016 Cable cleats for electrical installations
EN ISO 4288 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
EN 12284 : 2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
EN ISO 12085:1997/AC:2008 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS
UNI EN 13555 : 2014 FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS
EN ISO 13565-3 : 2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE
DIN EN 13231-3:2012-04 Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track
EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products
EN 10329:2006 Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings
EN ISO 21534:2009 Non-active surgical implants - Joint replacement implants - Particular requirements (ISO 21534:2007)
EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
DIN ISO 3384:2008-07 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES
EN 12560-5:2001 Flanges and their joints - Gaskets for Class-designated flanes - Part 5: Metallic ring joint gaskets for use with steel flanges
EN ISO 16119-3:2013 Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013)
EN 1071-3 : 2005 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 3: DETERMINATION OF ADHESION AND OTHER MECHANICAL FAILURE MODES BY A SCRATCH TEST
DIN EN ISO 14923:2003-10 THERMAL SPRAYING - CHARACTERIZATION AND TESTING OF THERMALLY SPRAYED COATINGS
EN ISO 12181-2 : 2011 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
DIN EN 10305-4:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
EN 62217:2013 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
EN 13570:2005+A1:2010 Food processing machinery - Mixing machines - Safety and hygiene requirements
EN ISO 1302 : 2002 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION (ISO 1302:2002)
EN 61264:1998/corrigendum:2000 CERAMIC PRESSURIZED HOLLOW INSULATORS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
EN 50526-1:2012 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters
DIN EN 10329:2006-04 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
DIN EN ISO 5981:2008-01 RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF RESISTANCE TO COMBINED SHEAR FLEXING AND RUBBING
DIN EN ISO 16119-2:2013-09 AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 2: HORIZONTAL BOOM SPRAYERS (ISO 16119-2:2013)
DIN EN 10339:2007-05 Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection
EN 13389:2005+A1:2009 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements
EN ISO 13565-2 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO
EN 61386-25 : 2011 Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices
IEC 60099-8:2017 RLV Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
DIN EN ISO 14880-4:2006-08 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2006)
EN 61400-4:2013 Wind turbines - Part 4: Design requirements for wind turbine gearboxes
DIN EN 15183:2006-11 Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test
DIN EN 10288:2003-12 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL TWO-LAYER EXTRUDED POLYETHYLENE BASED COATINGS
UNE-EN 13390:2002 Food processing machinery- Pie and tart machines - Safety and hygiene requirements.
UNE-EN 1673:2001 Food procesing machinery. Rotatory rack ovens. Safety and hygiene requirements.

ISO/TR 14638:1995 Geometrical product specification (GPS) Masterplan
EN ISO 4288 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
EN ISO 11562:1997/AC:2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - METROLOGICAL CHARACTERISTICS OF PHASE CORRECT FILTERS
ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
AS/NZS ISO 8124.1:2019 Safety of toys Safety aspects related to mechanical and physical properties
ISO 3274:1996 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.