• There are no items in your cart

ISO 4582:2017

Current
Current

The latest, up-to-date edition.

Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

08-17-2017

ISO 4582:2017 specifies methods to determine changes in colour and other appearance properties, and variations in mechanical or other properties, of plastics that have been exposed to glass-filtered solar radiation, to natural weathering or to simulated solar radiation from a laboratory source. The procedure used to analyse data depends on whether the test used to characterize the materials being exposed is destructive or non-destructive. The exposures are conducted under conditions described in specific exposure standards.

DevelopmentNote
Supersedes ISO/FDIS 4582. (08/2017)
DocumentType
Standard
Pages
16
ProductNote
THIS STANDARD ALSO REFERS-CIE Publication No. 15,ISO 75 (all parts),ISO 179 (all parts), ISO 527 (all parts), ISO 877 (all parts),ISO 4892 (all parts)
PublisherName
International Organization for Standardization
Status
Current
Supersedes

Standards Relationship
NEN ISO 4582 : 2017 Identical
UNI ISO 4582:2018 Identical
DIN ISO 4582:2019-03 Identical
SS-ISO 4582:2017 Identical
IS 13360 : Part 8 : Sec 13 : 2021 Identical
BS ISO 4582:2017 Identical
UNI ISO 4582 : 1985 Identical
UNE 53384:2002 Identical
SNV ISO 4582 : 1998 Identical
NS 9514 : 1ED 1985 Identical
UNE-ISO 4582:2014 Identical
BS 2782-5 Method 552A:1981 Identical

NF EN 10245-5 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
I.S. EN ISO 877:1997
DIN EN ISO 29664 E : 2017 PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
UNE-EN 16472:2015 Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps
I.S. EN 16472:2014 PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS
DIN EN 16472:2014-06 PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS
05/30133040 DC : DRAFT APR 2005 BS EN 1866 - MOBILE FIRE EXTINGUISHERS
16/30344238 DC : 0 BS EN ISO 877-3 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION
12/30236297 DC : 0 BS ISO 16474-4 - PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 4: CARBON-ARC LAMPS
07/30167330 DC : DRAFT AUG 2007 BS EN 868-8 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
BS EN ISO 30013:2011 Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties
EN 60079-30-1:2017 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
01/107289 DC : DRAFT OCT 2001 BS XXXX - SPECIFICATION FOR THE TESTING AND PERFORMANCE OF MICROPRISMATIC RETROREFLECTIVE SHEETING MATERIALS
BS 2782-5.540F(1995) : AMD 10678 METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - FLUORESCENT UV LAMPS
UNE-EN ISO 877-1:2011 Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009)
NFT 51 195-5 : 2008 PLASTICS - METHOD OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 5: MEDIUM PRESSURE MERCURY VAPOUR LAMPS
07/30155372 DC : 0 BS ISO 877-1 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
09/30176542 DC : 0 BS EN ISO 30013 - RUBBER AND THERMOPLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES
09/30179580 DC : 0 BS EN ISO 29664 - PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
UNE-EN ISO 30013:2012 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
ISO 7823-2:2003 Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets
UNI EN ISO 4892-2 : 2013 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS
I.S. EN ISO 7823-1:2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
ONORM EN ISO 4892-2 : 2013 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS (ISO 4892-2:2013)
EN 10245-1:2011 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
EN ISO 16871:2003 Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003)
EN 10245-2:2011 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
EN 10245-3:2011 Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
EN 10245-5:2011 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
DIN EN ISO 175:2011-03 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
DIN EN ISO 4611:2011-04 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
EN 1056 : 1996 METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES - PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING
BS 8442:2006 Miscellaneous road traffic signs and devices. Requirements and test methods
PD ISO/TS 19022:2016 Plastics. Method of controlled acceleration of laboratory weathering by increased irradiance
DIN EN ISO 105-B10 E : 2012 TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION (ISO 105-B10:2011)
95/102726 DC : DRAFT MARCH 1995 PREN 1873 - PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS WITH UPSTANDS
BS ISO 16474-4:2013 Paints and varnishes. Methods of exposure to laboratory light sources Open-flame carbon-arc lamps
DIN EN 16472 E : 2014 PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS
BS 2782-5.550B(1996) : 1996 AMD 9494
07/30155380 DC : 0 BS ISO 877-3 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION
BS EN ISO 877-2:2010 Plastics. Methods of exposure to solar radiation Direct weathering and exposure behind window glass
BS EN 10245-5:2011 Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire
PREN ISO 4611 : DRAFT 2010 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
BS ISO 2135:2017 Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
UNI EN ISO 877-1 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
UNE-EN ISO 877-2:2011 Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO 877-2:2009)
BS 2782-5.540E(1995) : 1995 AMD 10725 METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - XENON-ARC SOURCES
07/30127284 DC : 0 BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
ISO 4892-3:2016 Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
ISO/TS 19022:2016 Plastics — Method of controlled acceleration of laboratory weathering by increased irradiance
UNE-EN ISO 877-3:2011 Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2009)
DIN EN 868-8:2009-09 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
CAN/CSA-C22.2 NO. 60079-30-1:17 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements (Adopted IEC/IEEE 60079-30-1:2015, first edition, 2015-09, with Canadian deviations)
CEI EN 60079-30-1 : 2008 EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS
PREN 513 : DRAFT 2017 PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
UNI EN ISO 877-2 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: DIRECT WEATHERING AND EXPOSURE BEHIND WINDOW GLASS
CSA C22.2 No. 130 : 2016 REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING AND HEATING DEVICE SETS
DIN EN ISO 877-3:2016-09 (Draft) PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION
UNE-EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
ISO 7823-3:2007 Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 3: Continuous cast sheets
BS EN 3-3:1996 Portable fire extinguishers Construction, resistance to pressure, mechanical tests
BS EN ISO 7823-3:2007 Plastics. Poly(methacrylate) sheets. Types, dimensions and characteristics Continuous cast sheets
DIN EN 1866:1998-11 MOBILE FIRE EXTINGUISHERS
I.S. EN ISO 4892-3:2016 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS (ISO 4892-3:2016)
I.S. EN 10245-2:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
I.S. EN ISO 4611:2010 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
I.S. EN 10245-1:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
DIN EN ISO 877-2:2011-03 Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO 877-2:2009)
I.S. EN ISO 4892-2:2013 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARCLAMPS (ISO 4892-2:2013)
I.S. EN 10245-4:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE
I.S. EN ISO 4892-1:2016 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
DIN EN ISO 877-1:2011-03 Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009)
I.S. EN ISO 175:2010 PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
I.S. EN 10245-3:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
I.S. EN ISO 7823-3:2007 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS
BS 3412:1992 Methods of specifying general purpose polyethylene materials for moulding and extrusion
BS 2782-5.540D(1999) : 1999 AMD 13148 METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - GENERAL GUIDANCE
BS 2782-8.830A(1999) : 1999 AMD 13097 METHODS OF TESTING PLASTICS - OTHER PROPERTIES - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
DIN EN 10245-5:2012-01 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
I.S. EN ISO 16871:2003 PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING
ISO 16474-4:2013 Paints and varnishes Methods of exposure to laboratory light sources Part 4: Open-flame carbon-arc lamps
10/30206257 DC : 0 BS EN ISO 4611 - PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
BS ISO 15686-2:2012 Buildings and constructed assets. Service life planning Service life prediction procedures
11/30211716 DC : 0 BS EN ISO 4892-2 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS
UNI EN 16472 : 2014 PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS
ISO 877-3:2009 Plastics Methods of exposure to solar radiation Part 3: Intensified weathering using concentrated solar radiation
08/30180847 DC : DRAFT JUNE 2008 BS EN 10245-5 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
10/30205800 DC : 0 BS ISO 15686-2 - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE LIFE PLANNING - PART 2: SERVICE LIFE PREDICTION PROCEDURES
17/30368428 DC : 0 BS ISO 15314 - PLASTICS - METHODS FOR MARINE EXPOSURE
BS ISO 15314:2004 Plastics. Methods for marine exposure
DIN EN ISO 30013:2012-03 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
03/105565 DC : 0 ISO 4892-4 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 4: OPEN-FLAME CARBON-ARC LAMPS
PREN 868-8 : DRAFT 2017 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
08/30180835 DC : DRAFT JUNE 2008 BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
08/30180838 DC : DRAFT JUNE 2008 BS EN 10245-2 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
I.S. EN ISO 877-1:2010 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
I.S. EN ISO 30013:2011 RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES (ISO 30013:2011)
I.S. EN ISO 29664:2017 PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
ISO 2135:2017 Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
UNE-EN ISO 29664:2017 Plastics - Artificial weathering including acidic deposition (ISO 29664:2010)
BS 2782-5 Method 550A:1981 Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to natural weathering
DIN EN ISO 877-2:2016-09 (Draft) PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: DIRECT WEATHERING AND EXPOSURE BEHIND WINDOW GLASS
BS EN 60079-30-1:2017 Explosive atmospheres Electrical resistance trace heating. General and testing requirements
I.S. EN 868-8:2009 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
ASTM D 5857 : 2017 : REDLINE Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
ASTM G 153 : 2013 : REDLINE Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
UNI EN 868-8 : 2009 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
BS EN ISO 4892-3:2016 Plastics. Methods of exposure to laboratory light sources Fluorescent UV lamps
BS EN 10245-3:2011 Steel wire and wire products. Organic coatings on steel wire PE coated wire
BS EN 1866:2005 Mobile fire extinguishers
ISO 877:1994 Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
EN 868-8:2009 Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
EN ISO 29664:2017 Plastics - Artificial weathering including acidic deposition (ISO 29664:2010)
UNI EN ISO 4611 : 2011 PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST
UNI EN 10245-3 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
UNI EN 10245-1 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
UNI EN 10245-2 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
EN ISO 4611:2010 Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
UNI EN 10245-4 : 2011 Wire and drawn steel products - Organic coatings on steel wires - Part 4: Polyester coated wires
UNI EN ISO 175 : 2010 PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
UNI EN ISO 30013 : 2011 RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES
02/121868 DC : DRAFT APR 2002 BS ISO 15314 - PLASTICS - METHODS FOR MARINE EXPOSURE
UNI EN ISO 105-B10 : 2012 TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION
UNI EN 10245-5 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
14/30267384 DC : 0 BS EN 60079-30-1 ED 1.0 - EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL; TYPE TESTING AND DESIGN REQUIREMENTS
11/30211719 DC : 0 BS EN ISO 4892-3 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS
DIN EN ISO 877-1:2016-09 (Draft) PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
BS ISO 29664 : 2010 PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
03/112830 DC : DRAFT AUG 2003 BS EN ISO 4892-3 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS
18/30344274 DC : DRAFT APR 2018 BS ISO 21475 - PLASTICS - METHODS OF EXPOSURE TO DETERMINE THE WAVELENGTH DEPENDENT DEGRADATION USING SPECTRALLY DISPERSED RADIATION
14/30253068 DC : 0 BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
08/30180844 DC : DRAFT JUNE 2008 BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE
16/30333706 DC : 0 BS ISO 2135 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - ACCELERATED TEST OF LIGHT FASTNESS OF COLOURED ANODIC OXIDATION COATINGS USING ARTIFICIAL LIGHT
BS EN ISO 877-1:2010 Plastics. Methods of exposure to solar radiation General guidance
DIN EN ISO 105-B10:2012-01 Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011)
BS 7825-3.5:1997 Calibration of rubber and plastics test equipment. Calibration schedules Optical and weathering properties
07/30155375 DC : 0 BS ISO 877-2 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: EXPOSURE TO DIRECT AND GLASS- FILTERED SOLAR RADIATION
UNE-EN 60079-30-1:2017 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
ISO 4892-4:2013 Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
BS EN ISO 29664:2017 Plastics. Artificial weathering including acidic deposition
I.S. EN ISO 105-B10:2011 TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION (ISO 105-B10:2011)
NF EN ISO 877-1 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
DIN EN ISO 29664:2016-09 (Draft) PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
I.S. EN ISO 877-2:2010 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: DIRECT WEATHERING AND EXPOSURE BEHIND WINDOW GLASS
ISO 15686-2:2012 Buildings and constructed assets — Service life planning — Part 2: Service life prediction procedures
NF EN 868-8 : 2009 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
ONORM EN ISO 877-3 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION
EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
ASTM G 154 : 2016 : REDLINE Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
I.S. EN ISO 877-3:2010 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION
DIN EN ISO 4892-1:2016-10 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
DIN EN ISO 4892-2:2013-06 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
DIN EN ISO 7823-3:2007-08 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007)
DIN EN ISO 175 E : 2011 PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
DIN EN ISO 7823-2:2003-12 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
DIN EN 10245-4:2012-01 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011
BS EN ISO 4611:2010 Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist
ISO 4892-1:2016 Plastics Methods of exposure to laboratory light sources Part 1: General guidance
ISO 4613-2:1995 Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 4892-2:2013 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
UNE-EN 10245-3:2012 Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
BS EN ISO 4892-1:2016 Plastics. Methods of exposure to laboratory light sources General guidance
ISO 105-B10:2011 Textiles — Tests for colour fastness — Part B10: Artificial weathering — Exposure to filtered xenon-arc radiation
ISO 175:2010 Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
BS EN ISO 7823-2:2003 Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets
ISO 877-1:2009 Plastics — Methods of exposure to solar radiation — Part 1: General guidance
ISO 4611:2010 Plastics Determination of the effects of exposure to damp heat, water spray and salt mist
ISO 877-2:2009 Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass
ISO 16871:2003 Plastics piping and ducting systems Plastics pipes and fittings Method for exposure to direct (natural) weathering
BS EN ISO 7491:2000 Dental materials. Determination of colour stability
ISO 7823-1:2003 Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
BS EN ISO 4892-2:2013 Plastics. Methods of exposure to laboratory light sources Xenon-arc lamps
BS EN ISO 7823-1:2003 Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Cast sheets
BS EN 10245-4:2011 Steel wire and wire products. Organic coatings on steel wire Polyester coated wire
BS EN 10245-1:2011 Steel wire and wire products. Organic coatings on steel wire General rules
UNE-EN 10245-1:2012 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
UNE-EN ISO 4892-2:2014 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
UNE-EN ISO 4892-1:2017 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
DIN EN 10245-1:2012-01 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
EN ISO 4892-1:2016 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
EN ISO 877-2:2010 Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO 877-2:2009)
EN 16472:2014 Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps
EN ISO 877 : 1996
EN ISO 877-1:2010 Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009)
EN ISO 30013:2011 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
EN ISO 7823-1:2003 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003)
EN 3-3 : 1994 PORTABLE FIRE EXTINGUISHERS - PART 3: CONSTRUCTION, RESISTANCE TO PRESSURE, MECHANICAL TESTS
EN 1866:2005 Mobile fire extinguishers
EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
EN 10245-4:2011 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
EN ISO 7823-2 : 2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
EN ISO 175:2010 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
EN ISO 105-B10:2011 Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011)
PREN ISO 4892-2 : DRAFT 2011 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS
I.S. EN 1866:2006 MOBILE FIRE EXTINGUISHERS
NF EN ISO 877-2 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: DIRECT WEATHERING AND EXPOSURE BEHIND WINDOW GLASS
BS EN ISO 105-B10:2011 Textiles. Tests for colour fastness Artificial weathering. Exposure to filtered xenon-arc radiation
BS EN 16472:2014 Plastics. Method for artificial accelerated photoageing using medium pressure mercury vapour lamps
BS 2782-5:Method 540D:1995 Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to laboratory light sources. General guidance
DIN HDBK 400 : 2ED 2014 BEWITTERUNG - 48 NORMEN ZUR NATUERLICHEN UND KUENSTLICHEN BEWITTERUNG IM ORIGINALTEXT
BS EN ISO 877-3:2010 Plastics. Methods of exposure to solar radiation Intensified weathering using concentrated solar radiation
08/30180841 DC : DRAFT JUNE 2008 BS EN 10245-3 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
12/30266179 DC : 0 BS EN 16472 - PLASTICS - METHOD FOR ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS
EN ISO 7823-3:2007 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007)
I.S. EN 60079-30-1:2017 EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS
NFT 51 830 : 2002 XP PLASTICS - METHOD OF EXPOSURE TO LABORATORY LIGHT SOURCES - MEDIUM PRESSURE MERCURY VAPOUR LAMP
I.S. EN 10245-5:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
ISO/TS 18226:2006 Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
NF EN ISO 877-3 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION
UNI EN ISO 877-3 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFICATION WEATHERING USING CONCENTRATED SOLAR RADIATION
ISO 15314:2004 Plastics Methods for marine exposure
17/30361211 DC : 0 BS EN 513 - PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
17/30360915 DC : 0 BS EN 868-8 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
EN ISO 877-3:2010 Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2009)
BS EN 868-8:2009 Packaging for terminally sterilized medical devices Re-usable sterilization containers for steam sterilizers conforming to EN 285. Requirements and test methods
I.S. CEN TS 15354:2006 PLASTICS - EXTRUDED AND/OR CALENDERED, NON-REINFORCED FILM AND SHEETING MADE OF PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) - GUIDANCE FOR CHARACTERISATION AND DESIGNATION
DIN EN ISO 7823-1:2003-12 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
ISO 30013:2011 Rubber and plastics hoses Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties
ISO 29664:2010 Plastics Artificial weathering including acidic deposition
BS EN ISO 175:2010 Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals
BS EN 10245-2:2011 Steel wire and wire products. Organic coatings on steel wire PVC finished wire
BS EN ISO 16871:2003 Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering
DIN EN 10245-2:2012-01 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire; German version EN 10245-2:2011
DIN EN 10245-3:2012-01 Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire; German version EN 10245-3:2011
DIN EN ISO 4892-1:2001-09 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
CEN/TS 15354:2006 Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation
BS 2782-5.551A(1988) : 1988 AMD 10820 METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST

ISO 6603-2:2000 Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
ISO 11664-3:2012 Colorimetry Part 3: CIE tristimulus values
ISO 6721-5:1996 Plastics Determination of dynamic mechanical properties Part 5: Flexural vibration Non-resonance method
ISO 105-A03:1993 Textiles Tests for colour fastness Part A03: Grey scale for assessing staining
ISO 6603-1:2000 Plastics Determination of puncture impact behaviour of rigid plastics Part 1: Non-instrumented impact testing
ISO 11664-4:2008 Colorimetry Part 4: CIE 1976 L*a*b* Colour space
ISO 13468-1:1996 Plastics Determination of the total luminous transmittance of transparent materials Part 1: Single-beam instrument
ISO 8256:2004 Plastics — Determination of tensile-impact strength
ISO 18314-1:2015 Analytical colorimetry Part 1: Practical colour measurement
ISO 2602:1980 Statistical interpretation of test results Estimation of the mean Confidence interval
ISO 11664-1:2007 Colorimetry Part 1: CIE standard colorimetric observers
ISO 180:2000 Plastics Determination of Izod impact strength
AS 4285:2019 Rooflights
ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
ISO 306:2013 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
ISO 4628-6:2011 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
ISO 105-A01:2010 Textiles Tests for colour fastness Part A01: General principles of testing
ISO 2818:1994 Plastics — Preparation of test specimens by machining
ISO 105-A02:1993 Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour
ISO 11664-2:2007 Colorimetry — Part 2: CIE standard illuminants
ISO 10640:2011 Plastics Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy
ISO 6721-1:2011 Plastics Determination of dynamic mechanical properties Part 1: General principles
ISO 178:2010 Plastics Determination of flexural properties
ISO 14782:1999 Plastics Determination of haze for transparent materials
ISO 2813:2014 Paints and varnishes Determination of gloss value at 20, 60 and 85

View more information
US$111.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.