ISO 4954:1993
Withdrawn
Withdrawn
View Superseded by
Steels for cold heading and cold extruding
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
02-18-1993
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
Applies to wrought unalloyed and alloyed steels delivered as wire rods, wire or bars. The five sections cover the following topics: general requirements; steels not intended for heat treatment (diameters from 2 mm to 100 mm); case-hardening steels (diameters from 2 mm to 100 mm); steels for quenching and tempering including boron treated steels (diameters from 2 mm to 100 mm); stainless steels (diameters of 2 mm up to 25 mm for ferritic, up to 100 mm for martensitic, and up to 50 mm for austenitic steels).
| Committee |
ISO/TC 17/SC 4
|
| DevelopmentNote |
BS DRAFT 91/41353 DC DRAFT ISO/DIS 4954 is also available for this standard. (02/2017)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SAC GB/T 6478 : 2015 | Identical |
| JIS G 7401:2000 | Identical |
| DIN 1654-3:1989-10 | Similar to |
| DIN 1654-2:1989-10 | Similar to |
| 02/704957 DC : DRAFT NOV 2002 | ISO 683-14 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 14: HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS |
| 12/30250149 DC : 0 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
| 03/312638 DC : DRAFT JULY 2003 | ISO 14624-6 - SPACE SYSTEMS - SAFETY AND COMPATIBILITY OF MATERIALS - PART 6: DETERMINATION OF REACTIVITY OF PROCESSING MATERIALS WITH AEROSPACE FLUIDS |
| 13/30279057 DC : 0 | BS ISO 683-4 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 4: FREE-CUTTING STEELS |
| 13/30256266 DC : 0 | BS ISO 683-18 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 18: BRIGHT STEEL PRODUCTS |
| 04/30069217 DC : DRAFT FEB 2004 | ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE |
| ISO 683-18:2014 | Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products |
| ISO 4948-2:1981 | Steels — Classification — Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| BS EN ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Tapping screws |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts |
| BS EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress |
| I.S. EN ISO 3506-4:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 4: TAPPING SCREWS |
| 08/30166437 DC : DRAFT JAN 2008 | BS ISO 15510 - STAINLESS STEELS - CHEMICAL COMPOSITION |
| 02/713148 DC : DRAFT NOV 2002 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
| ISO 683-14:2004 | Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs |
| 12/30272892 DC : 0 | BS ISO 15510 - STAINLESS STEELS - CHEMICAL COMPOSITION |
| ISO 683-3:2016 | Heat-treatable steels, alloy steels and free-cutting steels — Part 3: Case-hardening steels |
| DD ISO/TS 15510:2003 | Stainless steels. Chemical composition |
| ISO/TS 15510:2003 | Stainless steels — Chemical composition |
| DIN EN ISO 8249:2000-10 | WELDING - DETERMINATION OF FERRITE NUMBER (FN) IN AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC CR-NI STAINLESS STEEL WELD METALS |
| ISO 683-1:2016 | Heat-treatable steels, alloy steels and free-cutting steels — Part 1: Non-alloy steels for quenching and tempering· |
| ISO 15510:2014 | Stainless steels — Chemical composition |
| DIN EN ISO 3506-3:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| DIN EN ISO 3506-4:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| BS EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs |
| BS EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Nuts |
| I.S. EN ISO 3506-3:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| ISO 14624-6:2006 | Space systems — Safety and compatibility of materials — Part 6: Determination of reactivity of processing materials with aerospace fluids |
| BS ISO 16143-3:2014 | Stainless steels for general purposes Wire |
| 12/30250152 DC : 0 | BS ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE |
| 14/30295082 DC : 0 | BS ISO 683-3 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 3: CASE HARDENING STEELS |
| BS 6787:1987 | Method for determination of ferrite number in austenitic weld metal deposited by covered Cr-Ni steel electrodes |
| EN ISO 8249:2000 | Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000) |
| ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws |
| BS ISO 16143-2:2014 | Stainless steels for general purposes Corrosion-resistant semi-finished products, bars, rods and sections |
| 03/312639 DC : DRAFT JULY 2003 | ISO 14624-7 - SPACE SYSTEMS - SAFETY AND COMPATIBILITY OF MATERIALS - PART 7: DETERMINATION OF PERMEABILITY RATE AND PENETRATION RESISTANCE OF MATERIALS TO AEROSPACE FLUIDS |
| BS ISO 15510:2014 | Stainless steels. Chemical composition |
| DIN ISO 3506:1992-12 | CORROSION-RESISTANT STAINLESS STEEL FASTENERS - SPECIFICATIONS |
| ISO 14624-7:2006 | Space systems — Safety and compatibility of materials — Part 7: Determination of permeability and penetration of materials to aerospace fluids |
| ISO 8249:2000 | Welding — Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals |
| ISO 3506:1979 | Corrosion-resistant stainless steel fasteners — Specifications |
| ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels |
| ISO 16143-2:2014 | Stainless steels for general purposes — Part 2: Corrosion-resistant semi-finished products, bars, rods and sections |
| ISO 14624-5:2006 | Space systems — Safety and compatibility of materials — Part 5: Determination of reactivity of system/component materials with aerospace propellants |
| ISO 683-11:2012 | Heat-treatable steels, alloy steels and free-cutting steels — Part 11: Case-hardening steels |
| EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
| I.S. EN ISO 3506-2:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| I.S. EN ISO 3506-1:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| EN ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| ISO/TR 11637:1997 | Boron treated engineering steels for quenching and tempering |
| BS ISO 14624-5:2006 | Space systems. Safety and compatibility of materials Determination of reactivity of system/component materials with aerospace propellants |
| BS ISO 14624-6:2006 | Space systems. Safety and compatibility of materials Determination of reactivity of processing materials with aerospace fluids |
| I.S. EN ISO 8249:2000 | WELDING - DETERMINATION OF FERRITE NUMBER (FN) IN AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC CR-NI STAINLESS STEEL WELD METALS |
| BS ISO 14624-7:2006 | Space systems. Safety and compatibility of materials Determination of permeability and penetration of materials to aerospace fluids |
| BS ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels Nitriding steels |
| 03/312637 DC : DRAFT JULY 2003 | ISO 14624-5 - SPACE SYSTEMS - SAFETY AND COMPATIBILITY OF MATERIALS - PART 5: DETERMINATION OF REACTIVITY OF SYSTEM/COMPONENT MATERIALS WITH AEROSPACE PROPELLANTS |
| BS EN ISO 8249:2000 | Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals |
| ISO 16143-3:2014 | Stainless steels for general purposes — Part 3: Wire |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs |
| ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress |
| UNE-EN ISO 3506-4:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| UNE-EN ISO 3506-3:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| UNE-EN ISO 3506-2:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| ISO/TR 9769:1991 | Steel and iron — Review of available methods of analysis |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| ISO 6892:1998 | Metallic materials — Tensile testing at ambient temperature |
| ISO 377-2:1989 | Selection and preparation of samples and test pieces of wrought steels — Part 2: Samples for the determination of the chemical composition |
| ISO 3887:2003 | Steels — Determination of depth of decarburization |
| ISO 6508:1986 | Metallic materials — Hardness test — Rockwell test (scales A - B - C - D - E - F - G - H - K) |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ISO 643:2012 | Steels — Micrographic determination of the apparent grain size |
| ISO 377-1:1989 | Selection and preparation of samples and test pieces of wrought steels — Part 1: Samples and test pieces for mechanical test |
| ISO 9443:1991 | Heat-treatable and alloy steels — Surface quality classes for hot-rolled round bars and wire rods — Technical delivery conditions |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.