ISO 5893:2002
Withdrawn
Withdrawn
View Superseded by
Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
06-27-2002
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO 5893:2002 specifies requirements for tensile-testing systems operating at constant rate of traverse and suitable for testing rubbers, plastics and adhesives, although any one system may only be applicable to a narrower range of materials. It also covers such systems when used for flexural, shear and compression tests.
| Committee |
ISO/TC 45/SC 2
|
| DevelopmentNote |
Supersedes ISO/DIS 5893 (07/2002)
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF ISO 5893 : 1988 | Identical |
| BS ISO 5893:2002 | Identical |
| NBN EN 12814-6 : 2000 | Identical |
| NBN E 53 101 : 1988 | Identical |
| NBN EN 28033 : 1993 | Identical |
| NEN ISO 5893 : 2002 | Identical |
| PN ISO 5893 : 2015 | Identical |
| NBN EN 26922 : 1993 | Identical |
| NBN EN 1979 : 1999 | Identical |
| NBN EN 12814-2 : 2000 | Identical |
| NBN EN 12814-1 : 2000 COR 2003 | Identical |
| UNE-ISO 5893:2012 | Identical |
| BS 5214-1:1995 | Identical |
| UNE 53417:2001 | Identical |
| BS 2000-519(2016) : 2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| BS ISO 5603:2017 | Rubber, vulcanized. Determination of adhesion to wire cord |
| BS ISO 4433-1:1997 | Thermoplastic pipes. Resistance to liquid chemicals. Classification Immersion test method |
| BS ISO 4647:2010 | Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test |
| 07/30083514 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| ISO 34-1:2015 | Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces |
| BS ISO 15024:2001 | Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, <i>G</i><sub>ic</sub>, for unidirectionally reinforced materials |
| BS EN 16556:2014 | Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications |
| DIN EN ISO 20795-2:2013-06 | DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS (ISO 20795-2:2013) |
| 11/30245835 DC : 0 | BS EN 302-1 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
| ISO 12817:2013 | Fibre-reinforced plastic composites — Determination of open-hole compression strength |
| BS ISO 5600:2017 | Rubber. Determination of adhesion to rigid materials using conical shaped parts |
| BS ISO 37:2017 | Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties |
| PREN 302-4 : DRAFT 2011 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH |
| BS ISO 18352:2009 | Carbon-fibre-reinforced plastics. Determination of compression-after-impact properties at a specified impact-energy level |
| 09/30193382 DC : 0 | BS ISO 4647 - RUBBER, VULCANIZED - DETERMINATION OF STATIC ADHESION TO TEXTILE CORD - H-PULL TEST |
| 15/30318244 DC : 0 | BS ISO 37 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSILE STRESS-STRAIN PROPERTIES |
| BS ISO 13586 : 2000 | PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (G[IC] AND K[IC]) - LINEAR ELASTIC FRACTURE MECHANICS (LEFM) APPROACH |
| 04/30091794 DC : DRAFT FEB 2004 | ISO 8033 - RUBBER AND PLASTICS HOSES - DETERMINATION OF ADHESION BETWEEN COMPONENTS |
| 12/30266398 DC : 0 | BS EN ISO 20795-2 - DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS |
| 15/30317333 DC : 0 | BS EN 205 - ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
| 06/30149355 DC : 0 | EN ISO 1798 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK |
| BS EN 14840:2005 | Joint fillers and sealants. Test methods for preformed joint seals |
| BS ISO 814:2017 | Rubber, vulcanized or thermoplastic. Determination of adhesion to metal. Two-plate method |
| NF ISO 4647 : 2010 | RUBBER, VULCANIZED - DETERMINATION OF STATIC ADHESION TO TEXTILE CORD - H-PULL TEST |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| PREN 3793 : 200P1 | AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF STATIC SHEAR STRENGTH |
| PREN 3794 : 200P1 | AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF TORQUE STRENGTH ON THREADED FASTENERS |
| ISO 13262:2010 | Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics spirally-formed structured-wall pipes — Determination of the tensile strength of a seam |
| EN ISO 2411:2017 | Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2017) |
| ISO 36:2017 | Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics |
| ISO 814:2017 | Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method |
| ISO 6605:2017 | Hydraulic fluid power — Test methods for hoses and hose assemblies |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| DIN EN 13587:2010-10 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| IEC 62011-2:2004 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test |
| BS EN ISO 8033:2017 | Rubber and plastics hoses. Determination of adhesion between components |
| BS EN ISO 604:2003 | Plastics. Determination of compressive properties |
| BS EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Determination of minimum pressing time under referenced conditions |
| BS EN 12743:1999 | Footwear. Test methods for outsoles. Compression energy |
| BS EN 302-3:2017 | Adhesives for load-bearing timber structures. Test methods Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength |
| BS EN 12637-1:2004 | Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products Compatibility with concrete |
| EN 12814-6:2000 | Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test |
| DIN EN 13706-2:2003-02 | REINFORCED PLASTICS COMPOSITES - SPECIFICATIONS FOR PULTRUDED PROFILES - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS |
| EN 12744:1999 | Footwear - Test methods for insoles - Delamination resistance |
| EN 62011-2:2004 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test |
| EN 12637-1:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete |
| EN 13587:2016 | Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method |
| PREN 302-6 : DRAFT 2011 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| BS 2782-11.1110C(1999) : 1999 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS SPIRALLY-FORMED STRUCTURED-WALL PIPES - DETERMINATION OF THE TENSILE STRENGTH OF A SEAM |
| 11/30245841 DC : 0 | BS EN 302-3 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH |
| ISO 4433-1:1997 | Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 1: Immersion test method |
| 14/30285784 DC : 0 | BS EN 16730 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
| 16/30340787 DC : 0 | BS ISO 13586 - PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (GIC AND KIC) - LINEAR ELASTIC FRACTURE MECHANICS (LEFM) APPROACH |
| 07/30162647 DC : 0 | BS ISO 7743 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES |
| ISO 20867:2018 | Footwear — Test methods for insoles — Heel pin holding strength |
| EN IEC 61730-2:2018/AC:2018-06 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2016) |
| PREN 15416-5 : DRAFT 2015 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| ISO 18352:2009 | Carbon-fibre-reinforced plastics — Determination of compression-after-impact properties at a specified impact-energy level |
| 09/30196780 DC : DRAFT JAN 2009 | BS ISO 12493 - RUBBER, VULCANIZED - DETERMINATION OF STRESS IN TENSION ON HEATING |
| ISO 15114:2014 | Fibre-reinforced plastic composites — Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach |
| BS EN ISO 2411:2017 | Rubber- or plastics-coated fabrics. Determination of coating adhesion |
| DIN EN 16556:2015-01 | DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| PREN 302-1 : DRAFT 2011 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
| 17/30342172 DC : 0 | BS ISO 20975-2 - CARBON-FIBRE-REINFORCED PLASTICS - METHODS FOR MEASUREMENT OF THROUGH-THICKNESS LAMINATE PROPERTIES - PART 2: CONSIDERING SIZE EFFECTS BY FLEXURAL TEST |
| 07/30175034 DC : DRAFT DEC 2007 | BS ISO 18352 - CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT ENERGY LEVEL |
| NF ISO 36 : 2017 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ADHESION TO TEXTILE FABRICS |
| BS 5173-103.1(1986) : 1986 | METHODS OF TEST FOR RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - PHYSICAL TESTS - DETERMINATION OF ADHESION BETWEEN COMPONENTS |
| 14/30304385 DC : 0 | BS ISO 34-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 2: SMALL (DELFT) TEST PIECES |
| BS ISO 6914:2013 | Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension |
| 09/30193376 DC : 0 | BS ISO 34-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES |
| 15/30317687 DC : 0 | BS EN ISO 8033 - RUBBER AND PLASTICS HOSES - DETERMINATION OF ADHESION BETWEEN COMPONENTS |
| 11/30245844 DC : 0 | BS EN 302-4 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH |
| BS ISO 19210:2017 | Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints |
| BS 903-A3.3.2(1997) : 1997 | PHYSICAL TESTING OF RUBBER - DETERMINATION OF TEAR STRENGTH - SMALL (DELFT) TEST PIECES |
| 10/30167702 DC : 0 | BS ISO 4635 - RUBBER, VULCANIZED - PREFORMED JOINT SEALS FOR USE BETWEEN CONCRETE HIGHWAY PAVING SECTIONS - SPECIFICATION |
| BIS IS 3400-1 : 2012 | METHODS OF TEST FOR VULCANIZED RUBBER - PART 1: DETERMINATION OF TENSILE STRESS-STRAIN PROPERTIES |
| BS 903-A21.21.1(1997) : 1997 | PHYSICAL TESTING OF RUBBER - DETERMINATION OF RUBBER TO METAL BOND STRENGTH - ADHESION TO RIGID SUBSTRATES - 90 DEGREE PEEL METHOD |
| PREN 15416-4 : DRAFT 2015 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| 09/30198121 DC : 0 | BS ISO 13262 - THERMOPLASTICS PIPING SYSTEMS FOR NON PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - THERMOPLASTICS SPIRALLY-FORMED STRUCTURES-WALL PIPES - DETERMINATION OF THE TENSILE STRENGTH OF A SEAM |
| BS ISO 4664:1998 | Rubber. Guide to the determination of dynamic properties |
| ISO 6916-2:2001 | Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 2: Mouldings and extrusions |
| I.S. EN ISO 13262:2017 | THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - THERMOPLASTICS SPIRALLY-FORMED STRUCTURED-WALL PIPES - DETERMINATION OF THE TENSILE STRENGTH OF A SEAM (ISO 13262:2010) |
| ISO 19213:2017 | Implants for surgery — Test methods of material for use as a cortical bone model |
| 15/30319712 DC : 0 | BS EN 1279-4 - GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEAL COMPONENTS AND INSERTS |
| I.S. EN ISO 2411:2017 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF COATING ADHESION (ISO 2411:2017) |
| ISO 12493:2017 | Rubber, vulcanized — Determination of stress in tension upon heating |
| IEC 61730-2:2016 | Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
| ISO 15108:1998 | Adhesives — Determination of strength of bonded joints using a bending-shear method |
| DIN EN ISO 4074:2016-05 | NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
| DIN EN 15416-5:2015-06 (Draft) | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| DIN EN 302-1:2013-06 | Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
| DIN EN ISO 9513:2013-05 | Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013) |
| DIN EN 15416-4:2015-06 (Draft) | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| BS EN 1979:1999 | Plastics piping and ducting systems. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam |
| BS EN 12745:1999 | Footwear. Test methods for insoles. Pin holding strength |
| BS EN ISO 14125 : 1998 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
| BS EN ISO 14129:1998 | Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the ± 45° tension test method |
| ISO 15310:1999 | Fibre-reinforced plastic composites — Determination of the in-plane shear modulus by the plate twist method |
| BS EN 12814-6:2000 | Testing of welded joints of thermoplastics semi-finished products Low temperature tensile test |
| DIN EN ISO 6259-1:2002-02 | THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD |
| I.S. EN 205:2016 | ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
| DIN EN 13587:2017-02 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| I.S. EN ISO 11339:2010 | ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
| DIN EN ISO 11339:2010-06 | Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
| I.S. EN 302-4:2013 | ADHESIVE FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH |
| I.S. EN 302-1:2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
| I.S. EN ISO 4074:2015 | NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
| I.S. EN 13587:2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| I.S. EN ISO 9513:2012 | METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING (ISO 9513:2012) |
| I.S. EN 302-3:2017 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH |
| I.S. EN 15416-4:2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME FOR ONE COMPONENT POLYURETHANE ADHESIVES |
| I.S. EN ISO 6259-1:2015 | THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD (ISO 6259-1:2015) |
| I.S. EN ISO 604:2003 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| I.S. EN 302-6:2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| I.S. EN 12814-2:2000 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 2: TENSILE TEST |
| DIN 53504:2009-10 | TESTING OF RUBBER - DETERMINATION OF TENSILE STRENGTH AT BREAK, TENSILE STRESS AT YIELD, ELONGATION AT BREAK AND STRESS VALUES IN A TENSILE TEST |
| I.S. EN ISO 8033:2017 | RUBBER AND PLASTICS HOSES - DETERMINATION OF ADHESION BETWEEN COMPONENTS (ISO 8033:2016) |
| EN 12814-2:2000 | Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test |
| I.S. EN 15416-5:2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF CONVENTIONAL PRESSING TIME |
| BS 903-A12(1999) : 1999 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ADHESION TO TEXTILE FABRIC |
| BS 903-A12:1995 | Physical testing of rubber Method for determination of the adhesion strength to textile fabric |
| DIN EN 15416-4:2017-05 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions |
| DIN EN 15416-5:2017-05 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
| BS 903-A3:1995 | Physical testing of rubber Method for determination of tear strength (trouser, angle and crescent test pieces) |
| BS 903-A4:1990 | Physical testing of rubber Determination of compression stress-strain properties |
| BS 903-A61(2000) : 2000 AMD 13431 | RUBBER - DETERMINATION OF FRICTIONAL PROPERTIES |
| NBR 15708-5 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - PULTRUDED SHAPES - PART 5: STRUCTURAL SHAPES |
| DIN 18035-7:2014-10 | SPORTS GROUNDS - PART 7: SYNTHETIC TURF AREAS |
| 02/122388 DC : DRAFT JUN 2002 | ISO/DIS 7743 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES |
| ISO 19210:2017 | Adhesives — Wood adhesives for non-structural applications — Determination of tensile shear strength of lap joints |
| I.S. EN ISO 20795-2:2013 | DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS (ISO 20795-2:2013) |
| ISO 2411:2017 | Rubber- or plastics-coated fabrics — Determination of coating adhesion |
| EN ISO 13262:2017 | Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010) |
| 14/30304382 DC : 0 | BS ISO 34-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES |
| DIN ISO 18352:2017-11 | CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT-ENERGY LEVEL (ISO 18352:2009) |
| BS ISO 6605:2017 | Hydraulic fluid power. Test methods for hoses and hose assemblies |
| 03/112850 DC : DRAFT SEP 2003 | ISO 4664 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DYNAMIC PROPERTIES - GENERAL CONSIDERATIONS |
| BS 2782-11.1161A(1998) : 1998 | METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES - THERMOPLASTICS PIPES - RESISTANCE TO LIQUID CHEMICALS - CLASSIFICATION - IMMERSION TEST METHOD |
| 16/30315352 DC : 0 | BS ISO 19210 - ADHESIVES - THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
| BS EN ISO 20795-2:2013 | Dentistry. Base polymers Orthodontic base polymers |
| PREN 1279-4 : DRAFT 2015 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEAL COMPONENTS AND INSERTS |
| BS 2000-519(2010) : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| DIN ISO 1827:2010-07 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF SHEAR MODULUS AND ADHESION TO RIGID PLATES - QUADRUPLE-SHEAR METHODS |
| PREN 12814-4 : DRAFT 2016 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 4: PEEL TEST |
| 02/122445 DC : DRAFT JUN 2002 | ISO/DIS 6914 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF AGEING CHARACTERISTICS BY MEASUREMENT OF STRESS RELAXATION |
| 09/30193379 DC : DRAFT FEB 2009 | BS ISO 813 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ADHESION TO A RIGID SUBSTRATE - 90 DEGREES PEEL METHOD |
| BS ISO 7743:2017 | Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties |
| ISO 34-2:2015 | Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces |
| 03/105598 DC : DRAFT MAY 2003 | BS ISO 18899 - RUBBER - GUIDE TO THE CALIBRATION OF TEST EQUIPMENT |
| BS ISO 15310 : 1999 AMD 15944 | REINFORCED PLASTICS - DETERMINATION OF THE IN-PLANE SHEAR MODULUS BY THE PLATE TWIST METHOD |
| 16/30341216 DC : 0 | BS EN 12814-4 - TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 4: PEEL TEST |
| BS ISO 6916-1:1995 | Flexible cellular polymeric materials. Sponge and expanded cellular rubber products. Specification Sheeting |
| CEI EN 62011-2 : 2005 | INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION, BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| ISO 5603:2017 | Rubber, vulcanized — Determination of adhesion to wire cord |
| BS ISO 15113:2005 | Rubber. Determination of frictional properties |
| BS ISO 18899:2013 | Rubber. Guide to the calibration of test equipment |
| DIN ISO 34-1:2016-09 | Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (ISO 34-1:2015) |
| BS 2000-519(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-519: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| BS EN 14257:2006 | Adhesives. Wood adhesives. Determination of tensile strength of lap joints at elevated temperature (WATT \'91) |
| I.S. EN 15870:2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| ASTM D 5938 : 1996 | Standard Test Method for Determination of Tensile Properties (Withdrawn 1998) |
| I.S. EN 12814-4:2002 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 4: PEEL TEST |
| ISO 17454:2006 | Plastics piping systems — Multilayer pipes — Test method for the adhesion of the different layers using a pulling rig |
| ISO 4578:1997 | Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method |
| BS ISO 813:2016 | Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90° peel method |
| ISO 20866:2018 | Footwear — Test methods for insoles — Delamination resistance |
| EN 12814-4:2018 | Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test |
| I.S. EN 12068:1999 | CATHODIC PROTECTION - EXTERNAL ORGANIC COATINGS FOR THE CORROSION PROTECTION OF BURIED OR IMMERSED STEEL PIPELINES USED IN CONJUNCTION WITH CATHODIC PROTECTION - TAPES AND SHRINKABLE MATERIALS |
| ISO 15113:2005 | Rubber — Determination of frictional properties |
| DIN EN 14188-3:2006-04 | Joint fillers and sealants - Part 3: Specifications for preformed joint seals |
| NF EN 12814-2 : 2000 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 2: TENSILE TEST |
| DIN EN 302-4:2013-06 | Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength |
| DIN EN 302-6:2013-06 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
| BS EN 302-1:2013 | Adhesives for load-bearing timber structures. Test methods Determination of longitudinal tensile shear strength |
| ISO 14125:1998 | Fibre-reinforced plastic composites — Determination of flexural properties |
| BS EN 13706-2:2002 | Reinforced plastics composites. Specifications for pultruded profiles Method of test and general requirements |
| BS EN ISO 9513:2012 | Metallic materials. Calibration of extensometer systems used in uniaxial testing |
| BS EN 12814-1:2000 | Testing of welded joints of thermoplastics semi-finished products Bend test |
| ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
| EN ISO 8033:2017 | Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
| EN 638 : 1994 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES |
| EN 1979:1999 | Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam |
| I.S. EN ISO 14125:1998 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
| I.S. EN ISO 14126:2000 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION |
| BS 2782-3.335A(1993) : AMD 8638 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF FLEXURAL PROPERTIES |
| ISO 1827:2016 | Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods |
| BS ISO 34-2:2015 | Rubber, vulcanized or thermoplastic. Determination of tear strength Small (Delft) test pieces |
| 96/125176 DC : DRAFT SEP 96 | ISO/CD 15024 DETERMINATION OF THE MODE 1 DELAMINATION RESISTANCE (CRITICAL STRAIN ENERGY RELEASE RATE OR FRACTURE TOUGHNESS G[LC]) OF UNIDIRECTIONAL FIBRE-REINFORCED POLYMER LAMINATES USING THE DOUBLE CANTILEVER BEAM (DCB) SPECIMEN |
| DIN EN 15416-5 E : 2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| 13/30259197 DC : 0 | BS EN 16556 - ADHESIVES - DETERMINATION OF THE OPEN ASSEMBLY TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| BS 2782-11.1110B(1995) : 1995 | METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTING AND VALVES - PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES |
| ISO 12815:2013 | Fibre-reinforced plastic composites — Determination of plain-pin bearing strength |
| ISO 6916-1:1995 | Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting |
| 14/30300605 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| BS EN 15870:2009 | Adhesives. Determination of tensile strength of butt joints |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| BS ISO 15114:2014 | Fibre-reinforced plastic composites. Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach |
| BS ISO 12493:2017 | Rubber, vulcanized. Determination of stress in tension upon heating |
| 00/121284 DC : DRAFT MAR 2000 | PREN 13864 - SURFACES FOR SPORTS AREAS - DETERMINATION OF TENSILE STRENGTH OF SYNTHETIC YARNS |
| BS ISO 12815:2013 | Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength |
| DIN ISO 11752 E : 2004 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - MOULDED AND EXTRUDED SPONGE OR EXPANDED CELLULAR RUBBER PRODUCTS - COMPRESSIBILITY TEST ON FINISHED PARTS |
| 15/30296777 DC : 0 | BS EN 15416-4 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| BS ISO 34-1:2015 | Rubber, vulcanized or thermoplastic. Determination of tear strength Trouser, angle and crescent test pieces |
| ISO 4647:2010 | Rubber, vulcanized — Determination of static adhesion to textile cord — H-pull test |
| 15/30328396 DC : 0 | BS EN 302-3 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH |
| 12/30215688 DC : 0 | BS ISO 15114 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF THE MODE 2 FRACTURE RESISTANCE FOR UNIDIRECTIONALLY REINFORCED MATERIALS USING THE CALIBRATED END-LOADED SPLIT (C-ELS) TEST AND AN EFFECTIVE CRACK LENGTH APPROACH |
| 11/30245847 DC : 0 | BS EN 302-6 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| BS ISO 9026:2007 | Raw rubber or unvulcanized compounds. Determination of green strength |
| 15/30296762 DC : 0 | BS EN 15416-5 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| 04/30110689 DC : DRAFT MARCH 2004 | BS ISO 37 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSIILE STRESS-STRAIN PROPERTIES |
| DIN ISO 7743:2016-08 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES (ISO 7743:2011) |
| ISO 13586:2000 | Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach |
| BS ISO 19213:2017 | Implants for surgery. Test methods of material for use as a cortical bone model |
| PREN ISO 20795-2 : DRAFT 2012 | DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS (ISO/FDIS 20795-2:2012) |
| I.S. EN 16556:2014 | DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NONSTRUCTURAL APPLICATIONS |
| ISO 4664:1998 | Rubber — Guide to the determination of dynamic properties |
| ISO 15107:1998 | Adhesives — Determination of cleavage strength of bonded joints |
| BS EN ISO 13262:2017 | Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam |
| ISO 18899:2013 | Rubber — Guide to the calibration of test equipment |
| ISO 15024:2001 | Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials |
| DIN EN ISO 14125:2011-05 | Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor 1:2001 + Amd 1:2011) |
| DIN EN ISO 14130:1998-02 | FIBRE REINFORCED PLASTIC COMPOSITES - DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH BY SHORT-BEAM METHOD |
| DIN EN 302-3:2015-09 (Draft) | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH |
| DIN EN 13864:2004-09 | Surfaces for sports areas - Determination of tensile strength of synthetic yarns |
| BS EN ISO 14126:1999 | Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction |
| BS EN ISO 11339:2010 | Adhesives. T-peel test for flexible-to-flexible bonded assemblies |
| DIN EN ISO 604:2003-12 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| ISO 8033:2016 | Rubber and plastics hoses — Determination of adhesion between components |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| BS EN 638:1995 | Plastics piping and ducting systems. Thermoplastics pipes. Determination of tensile properties |
| BS EN 12814-2:2000 | Testing of welded joints of thermoplastics semi-finished products Tensile test |
| ISO 14129:1997 | Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method |
| BS EN 14188-3 : 2005 | JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS |
| ISO 6259-1:2015 | Thermoplastics pipes — Determination of tensile properties — Part 1: General test method |
| ISO 14130:1997 | Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method |
| BS EN ISO 6259-1:2015 | Thermoplastics pipes. Determination of tensile properties General test method |
| ISO 20795-2:2013 | Dentistry — Base polymers — Part 2: Orthodontic base polymers |
| BS EN 13587:2016 | Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method |
| BS EN 13864:2004 | Surfaces for sports areas. Determination of tensile strength of synthetic yarns |
| ISO 14126:1999 | Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction |
| ISO 4074:2015 | Natural rubber latex male condoms — Requirements and test methods |
| BS EN 302-6:2013 | Adhesives for load-bearing timber structures. Test methods Determination of the minimum pressing time under referenced conditions |
| EN 14188-3:2006 | Joint fillers and sealants - Part 3: Specifications for preformed joint seals |
| EN ISO 15310:2005 | Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999) |
| EN 14840:2005 | Joint fillers and sealants - Test methods for preformed joint seals |
| EN 13864:2004 | Surfaces for sports areas - Determination of tensile strength of synthetic yarns |
| EN ISO 14130:1997 | Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method (ISO 14130:1997) |
| EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
| EN 13706-2:2002 | Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements |
| EN 302-4:2013 | Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength |
| EN ISO 11339:2010 | Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
| EN 15870:2009 | Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified) |
| EN ISO 604:2003 | Plastics - Determination of compressive properties (ISO 604:2002) |
| EN 16556:2014 | Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications |
| EN ISO 6259-1:2015 | Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015) |
| EN 205:2016 | Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints |
| EN ISO 14129:1997 | Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/- 45° tension test method (ISO 14129:1997) |
| EN 302-6:2013 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
| EN ISO 20795-2:2013 | Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013) |
| EN 302-3:2017 | Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength |
| EN ISO 4074:2015 | Natural rubber latex male condoms - Requirements and test methods (ISO 4074:2015) |
| EN 302-1:2013 | Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
| EN 14257:2006 | Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91) |
| EN 15416-4:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions |
| BS 2782-3.321(1994) : 1994 AMD 8633 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - GENERAL PRINCIPLES |
| DIN EN 15870:2009-08 | Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified); German version EN 15870:2009 |
| BS ISO 1827:2016 | Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods |
| BS PAS 27(1999) : 1999 | UNPLASTICIZED POLY(VINYL CHLORIDE) ALLOY (PVC-A) PIPES AND BENDS FOR WATER UNDER PRESSURE |
| 16/30334053 DC : 0 | BS EN ISO 2411 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF COATING ADHESION |
| I.S. EN 62011-2:2004 | INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION, BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES, - PART 2: METHODS OF TEST |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| 16/30335302 DC : 0 | BS ISO 1827 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF SHEAR MODULUS AND ADHESION TO RIGID PLATES - QUADRUPLE-SHEAR METHODS |
| BS EN 62011-2:2004 | Insulating materials. Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes Methods of test |
| DIN ISO 11752:2004-11 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - MOULDED AND EXTRUDED SPONGE OR EXPANDED CELLULAR RUBBER PRODUCTS - COMPRESSIBILITY TEST ON FINISHED PARTS |
| 15/30302738 DC : 0 | BS ISO 19213 - IMPLANTS FOR SURGERY - TEST METHODS OF MATERIAL FOR USE AS A CORTICAL BONE MODEL |
| BS ISO 12817:2013 | Fibre-reinforced plastic composites. Determination of open-hole compression strength |
| 11/30196210 DC : 0 | BS ISO 12815 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF PLAIN-PIN BEARING STRENGTH |
| 12/30251858 DC : 0 | BS ISO 4074 - NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS |
| 13/30274532 DC : 0 | BS EN ISO 6259-1 - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD |
| 12/30261822 DC : 0 | BS ISO 6914 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF AGEING CHARACTERISTICS BY MEASUREMENT OF STRESS RELAXATION IN TENSION |
| BIS IS 13360-5-8 : 2013 | PLASTICS - METHODS OF TESTING - PART 5: MECHANICAL PROPERTIES - SECTION 8: DETERMINATION OF COMPRESSIVE PROPERTIES |
| BS ISO 11752:2000 | Flexible cellular polymeric materials. Moulded and extruded sponge or expanded cellular rubber products. Compressibility test on finished parts |
| DIN EN 15416-4 E : 2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| 16/30312462 DC : 0 | BS ISO 6605 - HYDRAULIC FLUID POWER - TEST METHODS FOR HOSES AND HOSE ASSEMBLIES |
| ISO 5600:2017 | Rubber — Determination of adhesion to rigid materials using conical shaped parts |
| BS 903-A62:1993 | Physical testing of rubber Method for determination of green strength of raw rubber of unvulcanized compounds |
| BS ISO 36:2017 | Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics |
| ISO 7743:2017 | Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties |
| PREN 3795 : 200P1 | AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF FREEDOM FROM EXCESSIVE CURE RATE |
| ONORM EN 14257 : 2006 | ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
| ISO 4635:2011 | Rubber, vulcanized — Preformed joint seals for use between concrete paving sections of highways — Specification |
| ASTM D 5943 : 1996 | Test Method for Determination of Flexural Properties (Withdrawn 1998) |
| ISO 6914:2013 | Rubber, vulcanized or thermoplastic — Determination of ageing characteristics by measurement of stress relaxation in tension |
| ISO 11752:2000 | Flexible cellular polymeric materials — Moulded and extruded sponge or expanded cellular rubber products — Compressibility test on finished parts |
| ISO 604:2002 | Plastics — Determination of compressive properties |
| ISO 4585:1989 | Textile glass reinforced plastics — Determination of apparent interlaminar shear properties by short-beam test |
| NF EN 12814-4 : 2002 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 4: PEEL TEST |
| PREN 205 : DRAFT 2015 | ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
| PREN 302-3 : DRAFT 2015 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH |
| BS EN 12814-4:2001 | Testing of welded joints of thermoplastics semi-finished products Peel test |
| ISO 9026:2007 | Raw rubber or unvulcanized compounds — Determination of green strength |
| I.S. EN 14257:2006 | ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
| I.S. EN 14840:2005 | JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
| BS EN 12744:1999 | Footwear. Test methods for insoles. Delamination resistance |
| BS EN ISO 14130:1998 | Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method |
| ISO 11339:2010 | Adhesives — T-peel test for flexible-to-flexible bonded assemblies |
| BS EN 15416-4:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Determination of open assembly time under referenced conditions |
| BS EN 12637-3:2003 | Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products Effect of injection products on elastomers |
| BS EN 302-4:2013 | Adhesives for load-bearing timber structures. Test methods Determination of the effects of wood shrinkage on the shear strength |
| BS EN ISO 15310:2005 | Reinforced plastics. Determination of the in-plane shear modulus by the plate twist method |
| BS EN 12814-7:2002 | Testing of welded joints of thermoplastics semi-finished products Tensile test with waisted test specimens |
| BS EN 205:2003 | Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints |
| BS EN ISO 4074:2015 | Natural rubber latex male condoms. Requirements and test methods |
| EN 12637-3:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers |
| DIN EN 14840:2005-12 | Joint fillers and sealants - Test methods for preformed joint seals |
| DIN EN 12637-3:2004-03 | Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers; German version EN 12637-3:2003 |
| DIN EN 14257:2006-09 | ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
| EN 12745:1999 | Footwear - Test methods for insoles - Heel pin holding strength |
| EN 12814-7:2002 | Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens |
| EN 12068:1998 | Cathodic protection - External organic coatings for the corrosion protection of burried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials |
| DIN EN 12814-7:2003-01 | Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens; German version EN 12814-7:2002 |
| DIN EN 12637-1:2004-11 | Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete |
| IEC 61730-2:2016 RLV | Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
| I.S. EN 12814-1:2000 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 1: BEND TEST |
| UNE-ISO 4664-1:2011 | Rubber, vulcanised or thermoplastic. Determination of dynamic properties. Parte 1: General guidance |
| UNE-ISO 34-2:2011 | Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces |
| UNE-ISO 34-1:2011 | Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces |
| UNE-EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
| UNE-EN ISO 11339:2010 | Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
| UNE-EN 15416-4:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions |
| UNE-EN ISO 14125:1999 | FIBRE-REINFORCED PLASTICS COMPOSITES. DETERMINATION OF FLEXURAL PROPERTIES (ISO 14125:1998) |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| UNE-EN ISO 8033:2017 | Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
| UNE-EN ISO 20795-2:2013 | Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013) |
| UNE-ISO 37:2013 | Rubber, vulcanised or thermoplastic. Determination of tensile stress-strain properties |
| UNE-EN 302-1:2013 | Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
| UNE-EN 302-6:2013 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
| UNE-EN 302-4:2013 | Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength |
| UNE-EN ISO 4074:2016 | Natural rubber latex male condoms - Requirements and test methods (ISO 4074:2015) |
| UNE-EN ISO 2411:2018 | Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2017) |
| UNE-EN ISO 9513:2013 | Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012, Corrected version 2015-06) |
| UNE-EN ISO 6259-1:2015 | Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015) |
| UNE-ISO 7743:2016 | Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties |
| UNE-EN 205:2016 | Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints |
| I.S. EN 12814-7:2002 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 7: TENSILE TEST WITH WAISTED TEST SPECIMENS |
| BS 2782-3.345A(1993) : 1993 AMD 8637 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF COMPRESSIVE PROPERTIES |
| I.S. EN IEC 61730-2:2018 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING |
| ISO 7500-1:2015 | Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.