ISO 6142:2001
Withdrawn
Withdrawn
View Superseded by
Gas analysis — Preparation of calibration gas mixtures — Gravimetric method
Amended by
Available format(s)
Hardcopy , PDF
Published date
04-12-2001
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
| Committee |
ISO/TC 158
|
| DocumentType |
Standard
|
| Pages |
37
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| GOST R ISO 6142 : 2008 | Identical |
| NBN EN ISO 6142 : 2006 | Identical |
| NF EN ISO 6142 : 2006 | Identical |
| NEN EN ISO 6142 : 2006 | Identical |
| NEN ISO 6142 : 2001 | Identical |
| NS EN ISO 6142 : 1ED 2006 | Identical |
| I.S. EN ISO 6142:2007 | Identical |
| PN EN ISO 6142 : 2010 | Identical |
| BIS IS 16260 : 2014 | Identical |
| BS ISO 6142 : 2001 AMD 16906 | Identical |
| BS EN ISO 6142:2006 | Identical |
| EN ISO 6142:2006 | Identical |
| AS 3536-1988 | Identical |
| DIN EN ISO 6142:2006-11 | Identical |
| DIN ISO 6142:1985-05 | Identical |
| UNE 77246:2003 | Identical |
| UNE-EN ISO 6142:2007 | Identical |
| BS 4559-1.1:1983 | Identical |
| 10/30215322 DC : 0 | BS EN ISO 6974-1 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
| 10/30218038 DC : DRAFT MAY 2010 | BS ISO 15112 - NATURAL GAS - ENERGY DETERMINATION |
| DD ISO/TS 29041:2008 | Gas mixtures. Gravimetric preparation. Mastering correlations in composition |
| 13/30214514 DC : 0 | BS ISO 6145-2 - GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC METHODS - PART 2: VOLUMETRIC PUMPS |
| BS 4559-5.6:1987 | Methods for preparation of calibration gas mixtures. Dynamic volumetric methods Sonic orifices |
| BS ISO 17196:2014 | Dimethyl ether (DME) for fuels. Determination of impurities. Gas chromatographic method |
| BS EN 61207-1:2010 | Expression of performance of gas analyzers General |
| 15/30327269 DC : 0 | BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| 06/30147336 DC : 0 | EN 15483 - AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR |
| 13/30246093 DC : 0 | BS ISO 16960 - NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS - DETERMINATION OF TOTAL SULFUR BY OXIDATIVE MICROCOULOMETRY METHOD |
| BS ISO 14532 : 2001 AMD 15911 | NATURAL GAS - VOCABULARY |
| 10/30210750 DC : 0 | BS EN 14212 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF SULPHUR DIOXIDE BY ULTRAVIOLET FLUORESCENCE |
| BS EN 50054:1999 | Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods |
| BS 3156-11.1.2:1987 | Analysis of fuel gases. Methods for non-manufactured gases. Hydrocarbons and inert gases Determination of hydrocarbons from butane (C<sub>4</sub>) to hexadecane (C<sub>16</sub>) by gas chromatography |
| BS ISO 6145-2:2014 | Gas analysis. Preparation of calibration gas mixtures using dynamic methods Piston pumps |
| 03/306295 DC : DRAFT APR 2003 | EN 14662-4 - AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 4: DIFFUSIVE SAMPLING FOLLOWED BY THERMAL DESORPTION AND GAS CHROMATOGRAPHY |
| 03/306294 DC : DRAFT APR 2003 | EN 14662-3 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATION - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHIC ANALYSIS |
| BS ISO 6144 : 2003 AMD 16905 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - STATIC VOLUMETRIC METHOD |
| OIML R 143 : 2009 | INSTRUMENTS FOR THE CONTINUOUS MEASUREMENT OF SO[2] IN STATIONARY SOURCE EMISSIONS |
| PREN 15483 : DRAFT 2006 | AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR |
| DIN EN 12405-2:2012-10 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| DIN EN ISO 6145-1:2008-11 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 1: METHODS OF CALIBRATION |
| S.R. CEN ISO TR 24094:2007 | ANALYSIS OF NATURAL GAS - VALIDATION METHODS FOR GASEOUS REFERENCE MATERIALS |
| BS EN 50545-1 : 2011 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF TOXIC AND COMBUSTIBLE GASES IN CAR PARKS AND TUNNELS - PART 1: GENERAL PERFORMANCE REQUIREMENTS AND TEST METHODS FOR THE DETECTION AND MEASUREMENT OF CARBON MONOXIDE AND NITROGEN OXIDES |
| ISO 6145-2:2014 | Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 2: Piston pumps |
| I.S. EN ISO 15112:2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| CEI EN 60079-29-4 : 2011 | EXPLOSIVE ATMOSPHERES - PART 29-4: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF OPEN PATH DETECTORS FOR FLAMMABLE GASES |
| I.S. EN 61779-1:2003 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| EN ISO 6145-7:2010 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009) |
| I.S. EN 50545-1:2011 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF TOXIC AND COMBUSTIBLE GASES IN CAR PARKS AND TUNNELS - PART 1: GENERAL PERFORMANCE REQUIREMENTS AND TEST METHODS FOR THE DETECTION AND MEASUREMENT OF CARBON MONOXIDE AND NITROGEN OXIDES |
| ISO 6974-1:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition |
| BS EN 13528-3:2003 | Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods Guide to selection, use and maintenance |
| BS EN ISO 14111:1999 | Natural gas. Guidelines to traceability in analysis |
| BS EN 14626:2012 | Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy |
| BS EN 1231:1997 | Workplace atmospheres. Short term detector tube measurement systems. Requirements and test methods |
| I.S. EN 838:2010 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING DIFFUSIVE SAMPLERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13528-2:2002-12 | Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods |
| EN 12405-2:2012 | Gas meters - Conversion devices - Part 2: Energy conversion |
| EN 1231:1996 | Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods |
| EN 61207-1:2010 | Expression of performance of gas analyzers - Part 1: General |
| EN 13528-2:2002 | Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods |
| EN 1076:2009 | Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods |
| EN 60079-29-4:2010 | Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases |
| DIN EN ISO 6974-4:2002-06 | NATURAL GAS - DETERMINATION OF COMPOSITION WITH DEFINED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 4: DETERMINATION OF NITROGEN, CARBON DIOXIDE AND C[1] TO C[5] AND C[6+] HYDROCARBONS FOR A LABORATORY AND ON-LINE MEASURING SYSTEM USING TWO COLUMNS |
| EN 13528-3:2003 | Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance |
| EN 50054:1998 | Electrical apparatus for the detection and measurement of combustible gases - General requirements and test methods |
| DIN EN ISO 15971 E : 2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - CALORIFIC VALUE AND WOBBE INDEX (ISO 15971:2008) |
| BS EN ISO 6974-6:2008 | Natural gas. Determination of composition with defined uncertainty by gas chromatography Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns |
| 03/306306 DC : DRAFT JUNE 2003 | EN 14625 - AMBIENT AIR QUALITY - MEASUREMENT METHOD FOR THE DETERMINATION OF OZONE IN AMBIENT AIR BY MEANS OF ULTRAVIOLET PHOTOMETRIC METHOD |
| ISO 6974:1984 | Natural gas — Determination of hydrogen, inert gases and hydrocarbons up to C8 — Gas chromatographic method |
| DIN EN ISO 16960:2015-02 | NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS - DETERMINATION OF TOTAL SULFUR BY OXIDATIVE MICROCOULOMETRY METHOD (ISO 16960:2014) |
| EN 60079-29-1:2016 | Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
| ISO 10498:2004 | Ambient air — Determination of sulfur dioxide — Ultraviolet fluorescence method |
| BS ISO 15971 : 2008 | NATURAL GAS - MEASUREMENT OF PROPERTIES - CALORIFIC VALUE AND WOBBE INDEX |
| BS EN ISO 15971:2014 | Natural gas. Measurement of properties. Calorific value and Wobbe index |
| 01/121743 DC : DRAFT APRIL 2001 | BS ISO 19739 - NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS USING GAS CHROMATOGRAPHY |
| BS EN 15483:2008 | Ambient air quality. Atmospheric measurements near ground with FTIR spectroscopy |
| PD IEC/TS 62282-7-2:2014 | Fuel cell technologies Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC) |
| 14/30254778 DC : 0 | BS EN ISO 17621 - WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS |
| BS 3156-11.1.1:1986 | Analysis of fuel gases. Methods for non-manufactured gases. Hydrocarbons and inert gases Determination of hydrocarbons to C<sub>8</sub> and inert gases by gas chromatography |
| PD CEN ISO/TR 24094:2007 | Analysis of natural gas. Validation methods for gaseous reference materials |
| 07/30162401 DC : 0 | BS EN 61207-1 - EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 1: GENERAL |
| 13/30265458 DC : 0 | BS ISO 17196 - DIMETHYL ETHER (DME) FOR FUELS - DETERMINATION OF IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| BS ISO 15112 : 2011 | NATURAL GAS - ENERGY DETERMINATION |
| ISA 12.13.01 : 2003 | PERFORMANCE REQUIREMENTS FOR COMBUSTIBLE GAS DETECTORS |
| BS 4559-5.1:1987 | Methods for preparation of calibration gas mixtures. Dynamic volumetric methods Review of methods of calibration |
| PREN 14211 : DRAFT 2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF NITROGEN DIOXIDE AND NITROGEN MONOXIDE BY CHEMILUMINESCENCE |
| DIN EN ISO 15112:2014-09 | Natural gas - Energy determination (ISO 15112: 2011) |
| PREN 14662-3 : DRAFT 2013 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| DIN EN ISO 15112 E : 2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| BS EN ISO 5367:2014 | Anaesthetic and respiratory equipment. Breathing sets and connectors |
| I.S. EN ISO 19739:2006 | NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS USING GAS CHROMATOGRAPHY |
| ISO 5367:2014 | Anaesthetic and respiratory equipment — Breathing sets and connectors |
| IEC 60079-29-4:2009 | Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases |
| DIN EN 1076:2010-04 | Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods |
| DIN EN 14211:2012-11 | Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| DIN EN 14662-3:2016-02 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| DIN EN ISO 6974-1:2012-11 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
| DIN EN 14626:2012-12 | Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy |
| BS EN 14211:2012 | Ambient air. Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| BS EN ISO 14532:2017 | Natural gas. Vocabulary |
| IEC 61779-1:1998 | Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods |
| I.S. EN ISO 6974-1:2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012) |
| I.S. EN 14211:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF NITROGEN DIOXIDE AND NITROGEN MONOXIDE BY CHEMILUMINESCENCE |
| I.S. EN 14626:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF CARBON MONOXIDE BY NON-DISPERSIVE INFRARED SPECTROSCOPY |
| I.S. EN ISO 14532:2017 | NATURAL GAS - VOCABULARY (ISO 14532:2014) |
| I.S. EN 14212:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF SULPHUR DIOXIDE BY ULTRAVIOLET FLUORESCENCE |
| I.S. EN 14042:2003 | WORKPLACE ATMOSPHERES - GUIDE FOR THE APPLICATION AND USE OF PROCEDURES FOR THE ASSESSMENT OF EXPOSURE TO CHEMICAL AND BIOLOGICAL AGENTS |
| I.S. EN 14662-3:2015 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| VDI 2100 Blatt 3:2011-10 | Determination of gaseous compounds in ambient air - Determination of indoor air pollutants - Gas chromatographic determination of organic compounds - Active sampling by accumulation on adsorbents - Thermal desorption |
| VDE 0400-40-1 : 2000 AMD 1 2004 | SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| BS 3156-11.1.2(1997) : 1997 AMD 16104 | ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - HYDROCARBONS AND INERT GASES - EXTENDED ANALYSIS BY GAS CHROMATOGRAPHIC METHOD |
| DIN EN 61779-1 : 2001 AMD 11 2004 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 6145-7:2010 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 7: THERMAL MASS-FLOW CONTROLLERS |
| 10/30210756 DC : 0 | BS EN 14626 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF CARBON MONOXIDE BY NONDISPERSIVE INFRARED SPECTROSCOPY |
| OIML R 140 : 2007 | MEASURING SYSTEMS FOR GASEOUS FUEL |
| 17/30321967 DC : 0 | BS ISO/IEC 20435-1 - WORKPLACE ATMOSPHERES - PART 1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR TOXIC GASES |
| PREN 14626 : DRAFT 2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF CARBON MONOXIDE BY NONDISPERSIVE INFRARED SPECTROSCOPY |
| 09/30197590 DC : 0 | BS EN ISO 80601-2-55 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS |
| 13/30272419 DC : 0 | BS EN 14662-3 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| DIN EN 50241-1 : 2000 AMD 1 2004 | SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| BS ISO TR 9122-3:1993 | Toxicity testing of fire effluents Methods for the analysis of gases and vapours in fire effluents |
| 08/30163829 DC : DRAFT JAN 2008 | BS EN 1076 - WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS |
| 08/30172873 DC : DRAFT JULY 2008 | BS EN 838 - WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING DIFFUSIVE SAMPLERS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 16960:2014 | Natural gas. Determination of sulfur compounds. Determination of total sulfur by oxidative microcoulometry method |
| PREN 14212 : DRAFT 2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF SULPHUR DIOXIDE BY ULTRAVIOLET FLUORESCENCE |
| BS 3156-11.5(1996) : 96 AMD 14164 | ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - PERFORMANCE EVALUATION FOR ON-LINE ANALYTICAL SYSTEMS |
| 04/30122896 DC : DRAFT SEP 2004 | ISO 15112 - NATURAL GAS - ENERGY DETERMINATION |
| BS ISO 14687-3:2014 | Hydrogen fuel. Product specification Proton exchange membrane (PEM) fuel cell applications for stationary appliances |
| I.S. EN ISO 16960:2014 | NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS - DETERMINATION OF TOTAL SULFUR BY OXIDATIVE MICROCOULOMETRY METHOD (ISO 16960:2014) |
| 13/30255474 DC : 0 | BS ISO 7504 - GAS ANALYSIS - VOCABULARY |
| BS EN 50241-1:1999 | Specification for open path apparatus for the detection of combustible or toxic gases and vapours General requirements and test methods |
| 04/30112677 DC : 0 | IEC 61779-1 ED.2 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| 17/30352625 DC : DRAFT SEP 2017 | BS IEC 62282-8-101 ED1.0 - FUEL CELL TECHNOLOGIES - PART 8-101: ENERGY STORAGE SYSTEMS USING FUEL CELL MODULES IN REVERSE MODE - TEST PROCEDURES FOR SOLID OXIDE SINGLE CELL AND STACK PERFORMANCE INCLUDING REVERSING OPERATION |
| 14/30296672 DC : 0 | BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS |
| DIN EN ISO 17621:2015-12 | WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS (ISO 17621:2015) |
| ISO/TR 24094:2006 | Analysis of natural gas — Validation methods for gaseous reference materials |
| ISO/TS 29041:2008 | Gas mixtures — Gravimetric preparation — Mastering correlations in composition |
| BS EN 60079-29-4:2010 | Explosive atmospheres Gas detectors. Performance requirements of open path detectors for flammable gases |
| BS EN 60079-29-1:2007 | Explosive atmospheres Gas detectors. Performance requirements of detectors for flammable gases |
| I.S. EN ISO 17621:2015 | WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS (ISO 17621:2015) |
| BS ISO 6145-7 : 2009 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 7: THERMAL MASS-FLOW CONTROLLERS |
| ISO/TS 14167:2003 | Gas analysis — General quality assurance aspects in the use of calibration gas mixtures - Guidelines |
| I.S. EN ISO 6974-3:2002 | NATURAL GAS - DETERMINATION OF COMPOSITION WITH DEFINED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 3: DETERMINATION OF HYDROGEN, HELIUM, OXYGEN, NITROGEN, CARBON DIOXIDE AND HYDROCARBONS UP TO C[8] USING TWO PACKED COLUMNS |
| I.S. EN 61207-1:2010 | EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 1: GENERAL |
| I.S. EN 15483:2008 | AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY |
| DIN EN ISO 6975:2005-09 | Natural gas - Extended analysis - Gas-chromatographic method (ISO 6975:1997); German version EN ISO 6975:2005 |
| DIN EN 14212:2012-11 | Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence |
| BS EN 1076:2009 | Workplace exposure. Procedures for measuring gases and vapours using pumped samplers. Requirements and test methods |
| ISO 16960:2014 | Natural gas — Determination of sulfur compounds — Determination of total sulfur by oxidative microcoulometry method |
| ISO 6145-1:2003 | Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 1: Methods of calibration |
| EN ISO 6974-3:2001 | Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns (ISO 6974-3:2000) |
| EN ISO 15112:2014 | Natural gas - Energy determination (ISO 15112:2011) |
| EN ISO 6974-6:2005 | Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (ISO 6974-6:2002) |
| EN 14662-3:2015 | Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography |
| EN ISO 14532:2017 | Natural gas - Vocabulary (ISO 14532:2014) |
| EN 50241-1 : 99 AMD 1 2004 | SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 19739:2009-08 | NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS USING GAS CHROMATOGRAPHY |
| DIN 51872-4:1990-06 | Testing of gaseous fuels and other gases; determination of the components; gaschromatographic procedure |
| BS EN ISO 15112:2014 | Natural gas. Energy determination |
| DIN EN 15483:2009-02 | AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY |
| 03/306292 DC : DRAFT APR 2003 | EN 14662-1 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATION - PART 1: PUMPED SAMPLING FOLLOWED BY THERMAL DESORPTION AND GAS CHROMATOGRAPHY METHOD |
| I.S. EN ISO 5367:2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - BREATHING SETS AND CONNECTORS (ISO 5367:2014) |
| BS 4559-8:1985 | Methods for preparation of calibration gas mixtures Mass dynamic method |
| OIML R 99-1 & 2 : 2008 | INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS |
| BS ISO 6974-6 : 2002 | NATURAL GAS - DETERMINATION OF COMPOSITION WITH DEFINED UNCERTAINTY BY GAS CHROMATOGRAPHY - DETERMINATION OF HYDROGEN, HELIUM, OXYGEN, NITROGEN, CARBON DIOXIDE AND C[1] TO C[8] HYDROCARBONS USING THREE CAPILLARY COLUMNS |
| BS 3156-11.0.3(1997) : 1997 AMD 10655 | ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - GENERAL - GUIDELINES TO TRACEABILITY IN ANALYSIS OF NATURAL GAS |
| ISO 6974-3:2000 | Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns |
| BS EN 12405-2:2012 | Gas meters. Conversion devices Energy conversion |
| PREN ISO 80601-2-55 : DRAFT 2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS |
| BS EN ISO 17621:2015 | Workplace atmospheres. Short term detector tube measurement systems. Requirements and test methods |
| ISO 4224:2000 | Ambient air — Determination of carbon monoxide — Non-dispersive infrared spectrometric method |
| BS ISO 19739 : 2004 AMD 16788 | NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS USING GAS CHROMATOGRAPHY |
| BS ISO 6974-5 : 2000 AMD 13863 | NATURAL GAS - DETERMINATION OF COMPOSITION WITH DEFINED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 5: DETERMINATION OF NITROGEN, CARBON DIOXIDE AND C1 TO C5 AND C6+ HYDROCARBONS FOR A LABORATORY AND ON-LINE PROCESS APPLICATION USING THREE COLUMNS |
| DIN EN ISO 15971:2014-09 | Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008) |
| NF EN 61779-1 : 2005 AMD 11 2005 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| S.R. CR 1404:1994 | DETERMINATION OF EMISSIONS FROM APPLIANCES BURNING GASEOUS FUELS DURING TYPE-TESTING |
| I.S. EN 12405-2:2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| BS EN ISO 6145-1:2008 | Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods Methods of calibration |
| ISO 17196:2014 | Dimethyl ether (DME) for fuels — Determination of impurities — Gas chromatographic method |
| ISO 6145-7:2009 | Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 7: Thermal mass-flow controllers |
| DIN EN 838:2010-05 | Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods |
| BS EN 13528-2:2002 | Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods Specific requirements and test methods |
| BS EN ISO 6144:2006 | Gas analysis. Preparation of calibration gas mixtures. Static volumetric method |
| ISO 14111:1997 | Natural gas — Guidelines to traceability in analysis |
| BS EN ISO 6974-4:2001 | Natural gas. Determination of composition with defined uncertainty by gas chromatography Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns |
| ISO 6974-6:2002 | Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns |
| BS EN 14042:2003 | Workplace atmospheres. Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents |
| BS EN 14662-3:2015 | Ambient air. Standard method for the measurement of benzene concentrations Automated pumped sampling with in situ gas chromatography |
| ISO 6144:2003 | Gas analysis — Preparation of calibration gas mixtures — Static volumetric method |
| ISO 17621:2015 | Workplace atmospheres — Short term detector tube measurement systems — Requirements and test methods |
| IEC 61207-1:2010 | Expression of performance of gas analyzers - Part 1: General |
| ISO 14532:2014 | Natural gas — Vocabulary |
| ISO 6974-4:2000 | Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns |
| BS EN ISO 6974-1:2012 | Natural gas. Determination of composition and associated uncertainty by gas chromatography General guidelines and calculation of composition |
| BS EN 838:2010 | Workplace exposure. Procedures for measuring gases and vapours using diffusive samplers. Requirements and test methods |
| ISO 6975:1997 | Natural gas — Extended analysis — Gas-chromatographic method |
| ISO 15971:2008 | Natural gas — Measurement of properties — Calorific value and Wobbe index |
| I.S. EN 1076:2009 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS |
| EN ISO 6974-4:2001 | Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns (ISO 6974-4:2000) |
| EN ISO 6145-1:2008 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003) |
| EN ISO 6975:2005 | Natural gas - Extended analysis - Gas-chromatographic method (ISO 6975:1997) |
| EN ISO 15971:2014 | Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008) |
| EN ISO 14111:1999 | Natural gas - Guidelines to traceability in analysis (ISO 14111:1997) |
| EN 15483:2008 | Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy |
| EN 14626:2012 | Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy |
| EN 14042:2003 | Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents |
| EN ISO 6144:2006 | Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003) |
| EN ISO 16960:2014 | Natural gas - Determination of sulfur compounds - Determination of total sulfur by oxidative microcoulometry method (ISO 16960:2014) |
| EN 14211:2012 | Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| EN 838:2010 | Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods |
| EN ISO 5367:2014 | Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2014) |
| CEN ISO/TR 24094:2007 | Analysis of natural gas - Validation methods for gaseous reference materials (ISO/TR 24094:2006) |
| BS ISO 20729:2017 | Natural gas. Determination of sulfur compounds. Determination of total sulfur content by ultraviolet fluorescence method |
| I.S. EN 1231:1997 | WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 6974-3:2001 | Natural gas. Determination of composition with defined uncertainty by gas chromatography Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns |
| 10/30210747 DC : 0 | BS EN 14211 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF NITROGEN DIOXIDE AND NITROGEN MONOXIDE BY CHEMILUMINESCENCE |
| BS EN ISO 19739:2005 | Natural gas. Determination of sulfur compounds using gas chromatography |
| 09/30207853 DC : 0 | BS EN 12405-2 - GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| 13/30277457 DC : 0 | BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| ISO 14687-3:2014 | Hydrogen fuel — Product specification — Part 3: Proton exchange membrane (PEM) fuel cell applications for stationary appliances |
| 13/30267536 DC : 0 | BS EN 60079-29-1 ED 2.0 - EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES |
| 12/30247157 DC : 0 | BS ISO 14532 - NATURAL GAS - VOCABULARY |
| 17/30333444 DC : 0 | BS ISO 20729 - NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS - DETERMINATION OF TOTAL SULFUR CONTENT BY ULTRAVIOLET FLUORESCENCE METHOD |
| BS ISO 6145-1 : 2003 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 1: METHODS OF CALIBRATION |
| 17/30323887 DC : 0 | BS EN 62990-131 - WORKPLACE ATMOSPHERES - PART 1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR TOXIC GASES |
| 16/30312315 DC : 0 | BS EN ISO 80601-2-55 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS |
| BS ISO 6974-4 : 2000 AMD 13838 | NATURAL GAS - DETERMINATION OF COMPOSITION WITH DEFINED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 4: DETERMINATION OF NITROGEN, CARBON DIOXIDE AND C1 TO C5 AND C6+ HYDROCARBONS FOR A LABORATORY AND ON-LINE MEASURING SYSTEM USING TWO COLUMNS |
| I.S. EN ISO 15971:2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - CALORIFIC VALUE AND WOBBE INDEX (ISO 15971:2008) |
| BS EN 61779-1:2000 | Electrical apparatus for the detection and measurement of flammable gases General requirements and test methods |
| OIML R 144-1 : 2013 | INSTRUMENTS FOR CONTINUOUS MEASUREMENT OF CO, NO[X] IN STATIONARY SOURCE EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| I.S. EN 60079-29-1:2016 | EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES |
| ISO 15112:2011 | Natural gas — Energy determination |
| BS EN ISO 6145-7:2010 | Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods Thermal mass-flow controllers |
| I.S. EN ISO 6145-1:2008 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 1: METHODS OF CALIBRATION |
| I.S. EN ISO 6974-6:2005 | NATURAL GAS - DETERMINATION OF COMPOSITION WITH DEFINED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 6: DETERMINATION OF HYDROGEN, HELIUM, OXYGEN, NITROGEN, CARBON DIOXIDE AND C[1] TO C[8] HYDROCARBONS USING THREE CAPILLARY COLUMNS |
| I.S. EN 60079-29-4:2010 | EXPLOSIVE ATMOSPHERES - PART 29-4: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF OPEN PATH DETECTORS FOR FLAMMABLE GASES |
| I.S. EN 50241-1:1999 | SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN 14212:2012 | Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence |
| BS EN ISO 6975:2005 | Natural gas. Extended analysis. Gas chromatographic method |
| ISO 19739:2004 | Natural gas — Determination of sulfur compounds using gas chromatography |
| CR 1404:1994 | Determination of emissions from appliances burning gaseous fuels during type-testing |
| DIN EN ISO 6974-6:2005-08 | Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C<(Index)1> to C<(Index)8> hydrocarbons using three capillary columns (ISO 6974-6:2002) |
| EN 61779-1 : 2000 AMD 11 2004 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| DIN EN 13528-3:2004-04 | Ambient air quality - Diffuse samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance |
| EN ISO 17621:2015 | Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods (ISO 17621:2015) |
| DIN EN ISO 6144:2006-11 | Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003) |
| DIN EN ISO 6145-7:2011-03 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 7: THERMAL MASS-FLOW CONTROLLERS |
| DIN EN 14042:2003-07 | WORKPLACE ATMOSPHERES - GUIDE FOR THE APPLICATION AND USE OF PROCEDURES FOR THE ASSESSMENT OF EXPOSURE TO CHEMICAL AND BIOLOGICAL AGENTS |
| EN 50545-1:2011/A1:2016 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF TOXIC AND COMBUSTIBLE GASES IN CAR PARKS AND TUNNELS - PART 1: GENERAL PERFORMANCE REQUIREMENTS AND TEST METHODS FOR THE DETECTION AND MEASUREMENT OF CARBON MONOXIDE AND NITROGEN OXIDES |
| UNE-EN 60079-29-4:2011 | Explosive atmospheres -- Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases |
| UNE-EN ISO 15971:2014 | Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008) |
| UNE-EN ISO 14532:2017 | Natural gas - Vocabulary (ISO 14532:2014) |
| UNE-EN 14212:2013 | Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence |
| UNE-EN ISO 15112:2014 | Natural gas - Energy determination (ISO 15112:2011) |
| UNE-EN 14626:2013 | Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy |
| UNE-EN ISO 16960:2015 | Natural gas - Determination of sulfur compounds - Determination of total sulfur by oxidative microcoulometry method (ISO 16960:2014) |
| UNE-EN 50545-1:2012 | Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides |
| UNE-EN ISO 6145-7:2011 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009) |
| UNE-EN 14662-3:2016 | Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography |
| UNE-EN ISO 5367:2015 | Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2014) |
| UNE-EN 14211:2013 | Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| UNE-EN ISO 17621:2016 | Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods (ISO 17621:2015) |
| UNE-EN 60079-29-1:2017 | Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
| UNE-EN ISO 6974-1:2013 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
| UNE-EN 12405-2:2013 | Gas meters - Conversion devices - Part 2: Energy conversion |
| IEC 60079-29-1:2016+AMD1:2020 CSV | Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO/IEC Guide 98:1993 | Guide to the expression of uncertainty in measurement (GUM) |
| ISO 16664:2017 | Gas analysis — Handling of calibration gases and gas mixtures — Guidelines |
| ISO 6143:2001 | Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures |
| DIN 51896-1:1991-10 | GAS ANALYSIS; QUANTITIES OF COMPOSITIONS, COMPRESSIBILITY FACTOR, BASIS |
| ISO/TS 14167:2003 | Gas analysis — General quality assurance aspects in the use of calibration gas mixtures - Guidelines |
| ISO 6141:2015 | Gas analysis — Contents of certificates for calibration gas mixtures |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.