ISO 6507-1:2005
Withdrawn
Withdrawn
View Superseded by
Metallic materials — Vickers hardness test — Part 1: Test method
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
12-08-2005
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO 6507-1:2005 specifies the Vickers hardness test method for the three different ranges of test force for metallic materials.
The Vickers hardness test is specified in ISO 6507-1:2005 for lengths of indentation diagonals between 0,020 mm and 1,400 mm.
| Committee |
ISO/TC 164/SC 3
|
| DocumentType |
Standard
|
| Pages |
19
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN ISO 6507-1:2005 | Identical |
| IS 1501 : Part 1 : 2013(R2018) | Identical |
| BS EN ISO 6507-1:2005 | Equivalent |
| DIN EN ISO 6507-1:2016-08 (Draft) | Identical |
| UNE-EN ISO 6507-1:2006 | Identical |
| BS EN ISO 6507-1:2005 | Identical |
| NFA 03 154 : 1983 | Similar to |
| NBN E 82 001 : 1972 | Identical |
| GOST R ISO 6507-1 : 2007 | Identical |
| EN ISO 6507-1:2018 | Identical |
| PN EN ISO 6507-1 : 2007 | Identical |
| UNE 7423-1:1984 | Identical |
| I.S. EN ISO 6507-1:2018 | Identical |
| DIN 50133:1985-02 | Similar to |
| NF EN ISO 6507-1 : 2018 | Identical |
| NS 10110 : 1985 | Similar to |
| NFA 03 253 : 72 FD | Similar to |
| DIN EN ISO 6507-1:2006-03 | Identical |
| I.S. EN 4700-007:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| NF EN ISO 9015-1 : 2011 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
| 03/108761 DC : DRAFT MAY 2003 | EN ISO 10477 - DENTISTRY - POLYMER-BASED CROWN AND BRIDGE MATERIALS |
| DIN EN ISO 6506-2:2016-04 (Draft) | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| DIN EN ISO 15156-3:2015-12 | Petroleum and natural gas industries - Materials for use in HS-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015) |
| BS EN 4700-001:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip |
| BS EN 4677-001:2012 | Aerospace series. Welded and brazed assemblies for aerospace construction. Joints of metallic materials by electron beam welding Quality of welded assemblies |
| BS ISO 8535-1:2016 | Diesel engines. Steel tubes for high-pressure fuel injection pipes Requirements for seamless cold-drawn single-wall tubes |
| 11/30216118 DC : 0 | BS EN ISO 1797-3 - DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS |
| DIN EN ISO 21672-1:2012-07 | Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012) |
| BS 6516-1:1984 | Solderless connections Solderless wrapped connections. General requirements, test methods and practical guidance. |
| ISO 9652-4:2000 | Masonry — Part 4: Test methods |
| 04/30098257 DC : DRAFT MAY 2004 | EN ISO 6507-3 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| 14/30261090 DC : 0 | BS EN ISO 17937 - DENTISTRY - OSTEOTOME FOR BONE COMPACTION AND SINUS FLOOR ELEVATION |
| BS 2782-7:Method 722B:1996 | Methods of testing plastics. Rheological properties Determination of the fluidity of plastics using capillary and slit-die rheometers |
| DIN ISO 22826:2008-08 | Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005) |
| BS ISO 16877:2015 | Round steel short link chains for lifting purposes. Fine tolerance hoist chains for hand operated chain hoists. Grade TH |
| 17/30357660 DC : DRAFT AUG 2017 | BS ISO 4960 - STEEL STRIP, COLD-REDUCED WITH A MASS FRACTION OF CARBON OVER 0,25% |
| API 11D3 :2008 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| 17/30346738 DC : 0 | BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
| DIN EN ISO 9015-2:2016-10 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 2: MICROHARDNESS TESTING OF WELDED JOINTS (ISO 9015-2:2016) |
| DIN EN ISO 1797:2016-05 (Draft) | DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017) |
| 13/30290101 DC : 0 | BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| I.S. EN ISO 16744:2004 | DENTISTRY - BASE METAL MATERIALS FOR FIXED DENTAL RESTORATIONS |
| 13/30263803 DC : 0 | BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING |
| OIML G 4 : 1984 | HARDNESS TEST BLOCKS AND INDENTERS |
| DIN ISO 13411:1996-12 (Draft) | AEROSPACE - AIRFRAME ROLLING BEARINGS - NEEDLE ROLLER, NEEDLE TRACK ROLLER AND CYLINDRICAL ROLLER BEARINGS - TECHNICAL SPECIFICATION |
| I.S. EN 14587-3:2012 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 3: WELDING IN ASSOCIATION WITH CROSSING CONSTRUCTION |
| BS 7814:1995 | Specification for bolts and screws incorporating either underhead locking or anti-rotation features |
| DIN EN 12449:2015-11 (Draft) | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| 16/30327067 DC : 0 | BS EN ISO 3887 - STEELS - DETERMINATION OF DEPTH OF DECARBURIZATION |
| BS EN ISO 14998:2013 | Petroleum and natural gas industries. Downhole equipment. Completion accessories |
| 00/709299 DC : DRAFT JUNE 2000 | ISO 8535-2:1993 (REVISION) - COMPRESSION IGNITION ENGINES - STEEL TUBES FOR HIGH PRESSURE FUEL INJECTION PIPES - PART 2: REQUIREMENTS FOR COMPOSITE TUBES |
| API 5DP CHINESE : 2009 | SPECIFICATION FOR DRILL PIPE |
| BS EN ISO 21672-1:2012 | Dentistry. Periodontal probes General requirements |
| BS ISO 7689:2008 | Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa. Procurement specification |
| BS 3900-E12:1986 | Methods of test for paints Indentation test (spherical or pyramidal) |
| ISO 6208:1992 | Nickel and nickel alloy plate, sheet and strip |
| DIN 17751:2002-09 | TUBES OF WROUGHT NICKEL AND NICKEL ALLOYS - PROPERTIES |
| 01/714323 DC : DRAFT OCT 2001 | EN ISO 15156-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW ALLOY STEELS |
| BS ISO 11443:2014 | Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers |
| NF EN ISO 1133-1 : 2012 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD |
| XP PREN 3299 : 1997 XP | AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
| BS ISO 17804:2005 | Founding. Ausferritic spheroidal graphite ausferrite cast iron. Classification |
| BIS IS 1500-2 : 2013 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| 08/30190326 DC : DRAFT DEC 2008 | BS EN 10225 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| 17/30315891 DC : 0 | BS ISO 19690-2 - DISC SPRINGS - PART 2: TECHNICAL SPECIFICATIONS |
| 16/30297742 DC : DRAFT JUNE 2016 | BS EN ISO 19490 - DENTISTRY - SINUS MEMBRANE ELEVATOR |
| 10/30197302 DC : 0 | BS ISO 22068 - SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
| DIN 6773:2001-04 | HEAT TREATMENT OF FERROUS METALS - HEAT TREATED PARTS, PRESENTATION AND INDICATIONS ON DRAWINGS |
| 16/30319126 DC : 0 | BS ISO 20267 - THERMAL SPRAYING - DETERMINATION OF INTERFACIAL TOUGHNESS OF CERAMIC COATINGS BY INDENTATION |
| PD ISO/TR 10809-1:2009 | Cast irons Materials and properties for design |
| 04/30074927 DC : DRAFT JUN 2004 | EN ISO 6508-2 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| 02/711556 DC : 0 | LINKS FOR USE WITH STEEL CHAINS OF GRADE 8 |
| BS ISO 8535-2:2003 | Compression ignition engines. Steel tubes for high pressure fuel injection pipes Requirements for composite tubes |
| 12/30258463 DC : 0 | BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| BS EN 4700-005:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock |
| BS EN ISO 12670:2015 | Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
| 06/30151815 DC : 0 | BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS |
| 16/30302541 DC : 0 | BS EN ISO 19715 - DENTISTRY - FILLING INSTRUMENTS WITH CONTRA SET |
| 15/30314608 DC : 0 | BS EN ISO 7153-1 - SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS |
| 15/30293878 DC : 0 | BS ISO 19207 - THERMAL SPRAYING - CLASSIFICATION METHOD OF ADHESIVE STRENGTH BY INDENTATION |
| 12/30258615 DC : 0 | BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION |
| I.S. EN ISO 898-2:2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
| 13/30261096 DC : 0 | BS EN ISO 17945 - MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
| 17/30361645 DC : DRAFT SEP 2017 | BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| API 14L : 2007 : R2012 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| 06/30143946 DC : 0 | EN 485-1 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN 15594:2009 | Railway applications. Track. Restoration of rails by electric arc welding |
| PREN 10225-4 : DRAFT 2017 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| API 16A : 2017 INC ERR 1 + ERR 2 + ADD 1:2018 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| 04/30095196 DC : DRAFT MAY 2004 | EN ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| ISO 15590-2:2003 | Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 2: Fittings |
| 05/30128668 DC : DRAFT FEB 2005 | ISO 7689 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT |
| API 11D3 : 2008 : R2015 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| BS 6828-1:1987 | Dental rotary instruments Specification for shanks |
| 04/30116297 DC : DRAFT JUL 2004 | ISO 20826 - ROAD VEHICLES - AUTOMOTIVE LPG COMPONENTS - CONTAINERS |
| ISO 3887:2017 | Steels — Determination of the depth of decarburization |
| I.S. EN ISO 17945:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
| I.S. EN 16602-70-46:2014 | SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS |
| PREN 2646 : 200P3 | AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN STEEL, CADMIUM PLATED |
| DIN EN ISO 14917:2015-09 (Draft) | THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017) |
| EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| PREN 3299 : 200P1 | AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
| ISO 20267:2017 | Thermal spraying — Determination of interfacial toughness of ceramic coatings by indentation |
| PREN 3908 : 200P2 | AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN CORROSION RESISTING STEEL, PASSIVATED |
| ISO 15787:2016 | Technical product documentation — Heat-treated ferrous parts — Presentation and indications |
| I.S. EN 16771:2016 | RAILWAY APPLICATIONS - INFRASTRUCTURE - ALUMINOTHERMIC WELDING OF GROOVED RAILS |
| ISO/TR 15461:1997 | Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests |
| I.S. EN ISO 21672-1:2012 | DENTISTRY - PERIODONTAL PROBES - PART 1: GENERAL REQUIREMENTS (ISO 21672-1:2012) |
| I.S. EN 16725:2016 | RAILWAY APPLICATIONS - TRACK - RESTORATION AND REPAIR OF MANGANESE CROSSINGS |
| I.S. EN ISO 1797:2017 | DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017) |
| I.S. EN ISO 18556:2016 | DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016) |
| PREN 1015-11 : DRAFT 2017 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
| ISO 10477:2004 | Dentistry — Polymer-based crown and bridge materials |
| ISO 5857:2008 | Aerospace — Bolts, with MJ threads, made of alloy steel, strength class 1 250 MPa — Procurement specification |
| 18/30365854 DC : 0 | BS EN 1337-6 - STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
| ISO 8642:2008 | Aerospace — Self-locking nuts with maximum operating temperature greater than 425 degrees C — Test methods |
| I.S. EN ISO 1797-3:2013 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS (ISO 1797-3:2013) |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| BIS IS 15311-1 : 2003 AMD 1 | DENTAL ROTARY INSTRUMENTS - SHANKS - PART 1: SHANKS MADE OF METALS |
| EN 10132-1:2000 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General |
| ISO 22826:2005 | Destructive tests on welds in metallic materials — Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
| ISO 22394:2010 | Hardmetals — Knoop hardness test |
| I.S. EN ISO 16859-2:2015 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES (ISO 16859-2:2015) |
| NF EN 3299 : A2007 | AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
| API 14L CHINESE : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| EN ISO 80079-36:2016 | Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016) |
| I.S. EN 12390-4:2000 | TESTING HARDENED CONCRETE - PART 4: COMPRESSIVE STRENGTH - SPECIFICATION FOR TESTING MACHINES |
| DIN EN 13605:2013-09 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
| DIN EN 13599:2014-12 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| DIN EN ISO 15156-2:2015-12 | Petroleum and natural gas industries - Materials for use in HS-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons (ISO 15156-2:2015) |
| DIN EN ISO 5470-1:2015-04 (Draft) | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| DIN EN ISO 6508-2:2015-06 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015 |
| DIN EN ISO 10673:2009-10 | Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009) |
| DIN EN ISO 10669:1999-11 | Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999); German version EN ISO 10669:1999 |
| DIN EN 586-2:1994-11 | Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements; German version EN 586-2:1994 |
| DIN EN 13604:2013-09 | Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| BS EN ISO 13628-2:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications |
| BS EN ISO 15098-1:2001 | Dental tweezers General requirements |
| BS EN 13600:2013 | Copper and copper alloys. Seamless copper tubes for electrical purposes |
| BS EN ISO 14310:2008 | Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs |
| BS EN ISO 7085:1999 | Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
| BS EN 1301-1:2008 | Aluminium and aluminium alloys. Drawn wire Technical conditions for inspection and delivery |
| BS EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres Basic method and requirements |
| BS EN ISO 7089:2000 | Plain washers. Normal series. Product grade A |
| BS EN ISO 10673:2009 | Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A |
| BS EN 10328:2005 | Iron and steel. Determination of the conventional depth and hardening after surface heating |
| BS EN ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings |
| BS EN 586-2:1994 | Aluminium and aluminium alloys. Forgings Mechanical properties and additional property requirements |
| BS EN ISO 10669:1999 | Plain washers for tapping screw and washer assemblies. Normal and large series. Product grade A |
| BS EN 13348:2016 | Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum |
| BS EN ISO 7153-1:2016 | Surgical instruments. Materials Metals |
| BS EN ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Tapping screws |
| BS EN ISO 7091:2000 | Plain washers. Normal series. Product grade C |
| BS EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts |
| BS EN 14730-1:2017 | Railway applications. Track. Aluminothermic welding of rails Approval of welding processes |
| BS EN 24498-1:1993 | Sintered metal materials, exluding hardmetals. Determination of apparent hardness. Materials of essentially uniform section hardness |
| BS EN 14616:2004 | Thermal spraying. Recommendations for thermal spraying |
| ISO 7085:1999 | Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
| BS EN ISO 8750:2007 | Spring-type straight pins. Coiled, standard duty |
| BS EN ISO 8752:2009 | Spring-type straight pins. Slotted, heavy duty |
| I.S. EN 13601:2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| I.S. EN ISO 3506-4:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 4: TAPPING SCREWS |
| DIN EN 20898-2:1994-02 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH COARSE PITCH THREAD AND SPECIFIED PROOF LOAD VALUES |
| I.S. EN 13148:2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
| I.S. EN ISO 8748:2007 | SPRING-TYPE STRAIGHT PINS - COILED, HEAVY DUTY |
| EN 1043-1:1995 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints |
| EN 50109-2-3:1995 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 12805:2002 | Automotive LPG components - Containers |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| EN 12166:2016 | Copper and copper alloys - Wire for general purposes |
| EN 12080:2017 | Railway applications - Axleboxes - Rolling bearings |
| EN ISO 6508-2:2015 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
| EN 10088-4:2009 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| EN 10109-2 : 1994 | METALLIC MATERIALS - HARDNESS TEST - PART 2: VERIFICATION OF ROCKWELL TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| DIN EN ISO 15732:2005-09 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003) |
| DIN EN 14616:2005-02 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
| EN 12390-4:2000 | Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines |
| DIN EN 657:2005-06 | THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
| EN 10003-2 : 1994 | METALLIC MATERIALS - BRINELL HARDNESS TEST - VERIFICATION OF BRINELL HARDNESS TESTING MACHINES |
| DIN ISO 4498:2005-11 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
| EN 1337-2:2004 | Structural bearings - Part 2: Sliding elements |
| EN 12735-2:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
| DIN EN ISO 8750:2007-07 | Spring-type straight pins - Coiled, standard duty (ISO 8750:2007) |
| DIN EN ISO 5470-1:2017-04 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| EN ISO 9015-1:2011 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
| EN 13348:2016 | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
| EN 10109-3 : 1994 | METALLIC MATERIALS - HARDNESS OF TEST - PART 3: CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| EN 12513:2011 | Founding - Abrasion resistant cast irons |
| EN 12451:2012 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| DIN EN 15551:2011-01 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| DIN EN ISO 15087-1:2002-03 | Dental elevators - Part 1: General requirements (ISO 15087-1:1999); English version of DIN EN ISO 15087-1 |
| ISO 13411:1997 | Aerospace — Airframe needle roller, cylindrical roller and track roller bearings — Technical specification |
| EN 13600:2013 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
| BS EN ISO 16635-2:2014 | Dentistry. Dental rubber dam instruments Clamp forceps |
| 10/30165716 DC : 0 | BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| DIN 13906-1:1990-07 | DENTISTRY - DENTAL CASTING GOLD ALLOYS |
| DIN EN 60352-1:1998-04 | SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| 07/30139530 DC : 0 | BS ISO 8752 - SPRING-TYPE STRAIGHT PINS - SLOTTED, HEAVY DUTY |
| BS EN 16273:2014 | Railway applications. Track. Forged rail transitions |
| 05/30136295 DC : DRAFT JUL 2005 | ISO 4875-2 - METAL-CUTTING BAND SAW BLADES - PART 2: CHARACTERISTICS AND DIMENSIONS |
| 14/30268499 DC : 0 | BS ISO 16872 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - FINE TOLERANCE HOIST CHAINS FOR HAND OPERATED CHAIN HOISTS - GRADE VH |
| DIN EN ISO 16635-1 E : 2014 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
| API SPEC 11D1 : 2015 | PACKERS AND BRIDGE PLUGS |
| 16/30290358 DC : 0 | BS EN ISO 6507-2 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| DIN EN ISO 1133-1:2012-03 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
| API 64 : 2017-08 | DIVERTER EQUIPMENT SYSTEMS |
| BS EN 4700-006:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings |
| 14/30285793 DC : 0 | BS EN 16771 - RAILWAY APPLICATIONS - INFRASTRUCTURE - ALUMINOTHERMIC WELDING OF GROOVED RAILS |
| I.S. EN 657:2005 | THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
| ISO 17918:2015 | Corrosion of metals and alloys — Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement |
| BS EN ISO 17509:2016 | Dentistry. Torque transmitter for handpieces |
| DIN EN ISO 22068 E : 2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012) |
| DIN EN 16273:2015-03 | Railway applications - Track - Forged rail transitions |
| API 16A CHINESE : 2004 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| BS ISO 7492 : 1997 AMD 10134 | DENTAL EXPLORERS |
| I.S. EN 1043-1:1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
| PREN 14587-1 : DRAFT 2017 | RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF NEW RAILS - PART 1: R220, R260, R260MN, R320CR, R350HT, R350LHT, R370CRHT AND R400HT GRADE RAILS IN A FIXED PLANT |
| BS ISO 22394:2010 | Hardmetals. Knoop hardness test |
| ISO 13533:2001 | Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
| 15/30278527 DC : 0 | BS EN ISO 18559 - DENTISTRY - EXTRAORAL SPATULAS FOR MIXING DENTAL CEMENTS |
| DIN EN 16451:2015-09 | Railway applications - Braking - Brake pad holder |
| I.S. EN 15311:2007 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| I.S. EN ISO 14917:2017 | THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017) |
| BS EN ISO 19490:2017 | Dentistry. Sinus membrane elevator |
| BS ISO 15341:2014 | Graphic technology. Method for radius determination of printing cylinders |
| ISO 2853:1993 | Stainless steel threaded couplings for the food industry |
| 11/30238890 DC : 0 | BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES |
| BS ISO 22068 : 2012 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
| DIN EN 14587-3:2013-01 | Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
| DIN EN ISO 9873:2016-03 (Draft) | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
| 17/30352980 DC : 0 | BS EN ISO 14918 - THERMAL SPRAYING - QUALIFICATION TESTING OF THERMAL SPRAYERS |
| BS EN ISO 19715:2017 | Dentistry. Filling instrument with contra angle |
| BS ISO 19207:2016 | Thermal spraying. Classification method of adhesive strength by indentation |
| DIN EN 15594:2009-08 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
| 03/105579 DC : DRAFT APR 2003 | ISO 17744 - PLASTICS - DETERMINATION OF SPECIFIC VOLUME AS A FUNCTION OF TEMPERATURE AND PRESSURE (PVT DIAGRAM) - PISTON APPARATUS METHOD |
| 08/30168345 DC : DRAFT JULY 2008 | BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| ISO 16872:2015 | Round steel short link chains for lifting purposes — Fine tolerance hoist chains for hand operated chain hoists — Grade VH |
| ISO 12900:2015 | Hard coal — Determination of abrasiveness |
| BS EN ISO 16859-2:2015 | Metallic materials. Leeb hardness test Verification and calibration of the testing devices |
| BS A 343:1999 | Nuts, plain or slotted (castellated). Test methods |
| BS 7825-3.1:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Thermal properties |
| EN 4700-002:2016 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
| 07/30107797 DC : 0 | BS EN 14399-9 - HIGH STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - BOLT AND NUT ASSEMBLIES WITH DIRECT TENSION INDICATORS |
| ISO 15341:2014 | Graphic technology — Method for radius determination of printing cylinders |
| ISO 11443:2014 | Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers |
| BS ISO 16143-1:2014 | Stainless steels for general purposes Corrosion-resistant flat products |
| BS EN 4700-003:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube |
| I.S. EN 3908:2017 | AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN CORROSION RESISTING STEEL, PASSIVATED |
| 16/30348401 DC : 0 | BS EN ISO 14271 - RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS |
| BS EN 16602-70-46:2014 | Space product assurance. Requirements for manufacturing and procurement of threaded fasteners |
| BS ISO 16635-1 : 2013 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH |
| 13/30271610 DC : 0 | BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS |
| 11/30240285 DC : 0 | BS EN 16273 - RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS |
| 13/30246059 DC : 0 | BS ISO 15341 - GRAPHIC TECHNOLOGY - METHOD FOR RADIUS DETERMINATION OF PRINTING CYLINDERS |
| DIN EN ISO 17937:2016-01 | Dentistry - Osteotome (ISO 17937:2015) |
| BS EN 60372:2004 | Locking devices for ball and socket couplings of string insulator units. Dimensions and tests |
| 11/30212226 DC : 0 | BS ISO 21672-1 - DENTISTRY - PERIODONTAL PROBES - PART 1: GENERAL REQUIREMENTS |
| 02/563622 DC : DRAFT AUG 2002 | BS EN ISO 1562 - DENTISTRY - CASTING GOLD ALLOYS |
| PREN 10088-2 : DRAFT 2011 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| ISO 16877:2015 | Round steel short link chains for lifting purposes — Fine tolerance hoist chains for hand operated chain hoists — Grade TH |
| 04/30098250 DC : DRAFT MAY 2004 | EN ISO 6507-2 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| BS ISO 12891-2:2014 | Retrieval and analysis of surgical implants Analysis of retrieved surgical implants |
| 12/30246071 DC : 0 | BS ISO 15787 - TECHNICAL PRODUCT DOCUMENTATION - HEAT-TREATED FERROUS PARTS - PRESENTATION AND INDICATIONS |
| 13/30252136 DC : 0 | BS ISO 16468 - INVESTMENT CASTINGS (STEEL, NICKEL ALLOYS AND COBALT ALLOYS) - GENERAL TECHNICAL REQUIREMENTS |
| BS ISO 404:2013 | Steel and steel products. General technical delivery requirements |
| BS EN 50109-2-5:1996 | Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements Termination of twin-ax cable for databus applications |
| 15/30312459 DC : 0 | BS EN ISO 5182 - RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT |
| 09/30201953 DC : 0 | BS EN ISO 14271 - RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS |
| 15/30304304 DC : 0 | BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| 05/30136491 DC : DRAFT JUL 2005 | EN 15311 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| BS ISO 14705:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for hardness of monolithic ceramics at room temperature |
| 11/30239433 DC : 0 | BS EN 12449 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| BS ISO 17744:2004 | Plastics. Determination of specific volume as a function of temperature and pressure (pVT diagram). Piston apparatus method |
| API 11D1 REDLINE : 2009 | PACKERS AND BRIDGE PLUGS |
| BS 2000-450(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - TEST METHOD |
| 07/30144587 DC : 0 | BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25% |
| 07/30144593 DC : 0 | BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION |
| BS ISO 4498:2005 | Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness |
| BS EN 50340:2010 | Hydraulic cable cutting devices. Devices to be used on electrical installations with nominal voltage up to AC 30 kV |
| 00/121221 DC : DRAFT MARCH 2000 | ISO/CE 1133 - PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS |
| CEI EN 60372 : 2005 | LOCKING DEVICES FOR BALL AND SOCKET COUPLINGS OF STRING INSULATOR UNITS - DIMENSIONS AND TESTS |
| BS EN 60352-1:1998 | Solderless connections Wrapped connections. General requirements, test methods and practical guidance |
| I.S. EN ISO 17937:2015 | DENTISTRY - OSTEOTOME (ISO 17937:2015) |
| I.S. EN ISO 80079-36:2016 | EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO/DIS 80079-36:2014) |
| 05/30091555 DC : DRAFT MAY 2005 | ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| 07/30139533 DC : 0 | BS ISO 13337 - SPRING-TYPE STRAIGHT PINS - SLOTTED, LIGHT DUTY |
| BS EN ISO 17078-3:2009 | Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
| ISO 3077:2001 | Short-link chain for lifting purposes — Grade T, (types T, DAT and DT), fine-tolerance hoist chain |
| I.S. EN ISO 10477:2004 | DENTISTRY - POLYMER-BASED CROWN AND BRIDGE MATERIALS |
| API SPEC 16F : 2017 | SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
| BS EN ISO 12156-1:2016 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
| ISO 16798:2004 | Links of Grade 8 for use with slings |
| ISO/TR 10809-1:2009 | Cast irons — Part 1: Materials and properties for design |
| I.S. EN 16273:2014 | RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS |
| ISO 1797:2017 | Dentistry — Shanks for rotary and oscillating instruments |
| BS EN ISO 11961:2008 | Petroleum and natural gas industries. Steel drill pipe |
| OIML G 3 : 1983 | FACTORS INFLUENCING HARDNESS MEASUREMENT (A SYSTEMATIC SURVEY OF RESEARCH RESULTS) |
| I.S. EN ISO 14457:2017 | DENTISTRY - HANDPIECES AND MOTORS (ISO 14457:2017) |
| I.S. EN 12449:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| I.S. EN ISO 14998:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013) |
| ISO 6931-2:2005 | Stainless steels for springs — Part 2: Narrow strip |
| ISO 4875-2:2006 | Metal-cutting band saw blades — Part 2: Characteristics and dimensions |
| ISO 18203:2016 | Steel — Determination of the thickness of surface-hardened layers |
| ISO 9873:2017 | Dentistry — Intra-oral mirrors |
| ISO 7091:2000 | Plain washers — Normal series — Product grade C |
| DIN EN ISO 19715:2016-03 (Draft) | DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
| PREN 12797 : DRAFT 2017 | BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
| BS EN 12449:2016 | Copper and copper alloys. Seamless, round tubes for general purposes |
| I.S. EN ISO 9873:2017 | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
| ISO 16143-1:2014 | Stainless steels for general purposes — Part 1: Corrosion-resistant flat products |
| I.S. EN ISO 9015-1:2011 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
| I.S. EN ISO 16635-2:2014 | DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS (ISO 16635-2:2014) |
| PREN 12080 : DRAFT 2015 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| PREN 1337-6 : DRAFT 2018 | STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
| BS EN ISO 6506-2:2014 | Metallic materials. Brinell hardness test Verification and calibration of testing machines |
| NF EN ISO 17078-3 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| DIN EN 14399-9:2016-01 (Draft) | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| EN ISO 6507-3:2018 | Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018) |
| ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| EN ISO 6507-2:2018 | Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2018) |
| EN ISO 6507-4:2018 | Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018) |
| ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials |
| I.S. EN 50340:2010 | HYDRAULIC CABLE CUTTING DEVICES - DEVICES TO BE USED ON ELECTRICAL INSTALLATIONS WITH NOMINAL VOLTAGE UP TO AC 30 KV |
| I.S. ISO 6441:1988 | PAINTS AND VARNISHES - INDENTATION TEST (SPHERICAL OR PYRAMIDAL) |
| ISO 683-13:1974 | Heat-treated steels, alloy steels and free-cutting steels — Part 13: Wrought stainless steels |
| I.S. EN 3299:2007 | AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
| EN 12168:2016 | Copper and copper alloys - Hollow rod for free machining purposes |
| DIN EN ISO 3506-3:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| DIN EN 14730-1:2014-05 (Draft) | RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
| DIN EN ISO 3506-4:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN EN 12080:2015-06 (Draft) | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| DIN EN 12168:2015-12 (Draft) | COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
| DIN EN ISO 4498:2010-11 | Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
| DIN EN ISO 898-5:2012-09 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| BS EN 12450:2012 | Copper and copper alloys. Seamless, round copper capillary tubes |
| BS EN ISO 10666:1999 | Drilling screws with tapping screw threads. Mechanical and functional properties |
| BS EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs |
| ISO 7092:2000 | Plain washers — Small series — Product grade A |
| ISO 80079-36:2016 | Explosive atmospheres — Part 36: Non-electrical equipment for explosive atmospheres — Basic method and requirements |
| BS EN 772-1 : 2011 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
| BS EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Nuts |
| ISO 18265:2013 | Metallic materials — Conversion of hardness values |
| BS EN 1172:2011 | Copper and copper alloys. Sheet and strip for building purposes |
| BS EN 12797:2000 | Brazing. Destructive tests of brazed joints |
| BS EN 12080:2017 | Railway applications. Axleboxes. Rolling bearings |
| BS EN 13148:2010 | Copper and copper alloys. Hot-dip tinned strip |
| BS EN ISO 898-6:1996 | Mechanical properties of fasteners Nuts with specified proof load values. Fine pitch thread |
| BS EN 10109-3:1996 | Metallic materials. Hardness test Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K, N, T) |
| BS EN 1337-2:2004 | Structural bearings Sliding elements |
| BS EN 14399-1:2015 | High-strength structural bolting assemblies for preloading General requirements |
| I.S. EN 12450:2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| I.S. EN 485-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN 13600:2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
| I.S. EN ISO 6508-2:2015 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES AND INDENTERS (ISO 6508-2:2015) |
| I.S. EN ISO 13628-2:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| I.S. EN ISO 8751:2007 | SPRING-TYPE STRAIGHT PINS - COILED, LIGHT DUTY |
| DIN EN 12513:2011-05 | Founding - Abrasion resistant cast irons |
| I.S. EN 772-1:2011 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
| I.S. EN ISO 10510:2011 | TAPPING SCREW AND WASHER ASSEMBLIES WITH PLAIN WASHERS |
| I.S. EN ISO 7153-1:2016 | SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS (ISO 7153-1:2016) |
| I.S. EN ISO 5470-1:2016 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| I.S. EN 12080:2017 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| I.S. EN 12166:2016 | COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES |
| I.S. EN ISO 7085:2000 | MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS |
| I.S. EN ISO 8750:2007 | SPRING-TYPE STRAIGHT PINS - COILED, STANDARD DUTY |
| I.S. EN ISO 8752:2009 | SPRING-TYPE STRAIGHT PINS - SLOTTED, HEAVY DUTY |
| DIN EN 13148:2010-12 | Copper and copper alloys - Hot-dip tinned strip |
| DIN EN 12450:2013-01 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| I.S. EN 1301-1:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DIN EN 1043-1:1996-02 | DESTRUCTIVE TEST ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
| I.S. EN ISO 15156-2:2015&LC:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
| DIN EN 12451:2012-08 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| DIN 34820:2004-05 | CHAMFERED PLAIN WASHERS FOR USE IN STRUCTURAL STEELWORK |
| I.S. EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| DIN EN 1172:2012-02 | Copper and copper alloys - Sheet and strip for building purposes |
| I.S. EN ISO 3887:2018 | STEELS - DETERMINATION OF THE DEPTH OF DECARBURIZATION (ISO 3887:2017) |
| DIN EN 1057:2010-06 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications (includes Amendment A1:2010) |
| DIN EN 10003-2:1995-01 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION OF BRINELL HARDNESS TESTING MACHINES |
| DIN EN ISO 16744:2004-05 | DENTISTRY - BASE METAL MATERIALS FOR FIXED DENTAL RESTORATIONS |
| I.S. EN 13599:2014 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| I.S. EN 818-7:2002 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
| I.S. EN 13605:2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| I.S. EN ISO 2702:2011 | HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
| I.S. EN ISO 1522:2006 | PAINTS AND VARNISHES - PENDULUM DAMPING TEST |
| I.S. EN 12452:2012 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| DIN EN 10088-2:2014-12 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| I.S. EN ISO 10673:2009 | PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES - SMALL, NORMAL AND LARGE SERIES - PRODUCT GRADE A |
| EN ISO 15156-2:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015) |
| DIN EN 12452:2012-08 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| I.S. EN ISO 18265:2013 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
| I.S. EN 1172:2011 | COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES |
| DIN EN 13463-1:2009-07 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
| I.S. EN 12168:2016 | COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
| DIN EN 772-1:2000-09 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
| I.S. EN ISO 10432:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| I.S. EN ISO 898-1:2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| I.S. EN ISO 14310:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
| I.S. EN 13348:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR MEDICAL GASES OR VACUUM |
| I.S. EN 13604:2013 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
| I.S. EN ISO 14727:1999 | DENTAL IMPLANTS - PREFABRICATED PARTS CONNECTING SUPRASTRUCTURES TO DENTAL IMPLANTS - CONTENTS OF TECHNICAL FILE |
| I.S. EN 12513:2011 | FOUNDING - ABRASION RESISTANT CAST IRONS |
| DIN EN ISO 1133:2000-02 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
| DIN EN ISO 1133:2005-09 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS |
| I.S. EN ISO 13337:2009 | SPRING-TYPE STRAIGHT PINS - SLOTTED, LIGHT DUTY |
| EN ISO 15156-3:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015) |
| I.S. EN 14730-1:2017 | RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
| I.S. EN 10003-2:1995 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION OF BRINELL HARDNESS TESTING MACHINES |
| I.S. EN 12451:2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| DIN EN ISO 6506-2:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| DIN EN ISO 11970:2016-08 | Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016) |
| I.S. EN ISO 10451:2010 | DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
| DIN EN 12080:2017-11 | Railway applications - Axleboxes - Rolling bearings |
| I.S. EN ISO 898-5:2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012) |
| I.S. EN ISO 16070:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
| I.S. EN ISO 11970:2016 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR PRODUCTION WELDING OF STEEL CASTINGS (ISO 11970:2016) |
| I.S. EN 12735-2:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 2: TUBES FOR EQUIPMENT |
| I.S. EN ISO 4498:2010 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
| I.S. EN ISO 3506-3:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| I.S. EN 14399-1:2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
| SAEITC TS220-1 | TS220 Technical Specification for Self Locking Union Nuts (Unified Threads) Manufactured from INCO718 Material.1270 MPa (185000 lbf/in2) Minimum Tensile Strength at Room Temperature |
| BS 2782-3:Method 370:1996 | Methods of testing plastics. Mechanical properties Determination of resistance to wear by abrasive wheels |
| VDI/VDE 2616 Blatt 1:2012-08 | Hardness testing of metallic materials |
| BS 2782-7.720A(1997) : 1997 AMD 10722 | METHODS OF TESTING PLASTICS - RHEOLOGICAL PROPERTIES - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS |
| VDI/VDE 2616 Blatt 2:2014-07 | Hardness testing of plastics and elastomers |
| BS 1016-111:1998 | Methods for analysis and testing of coal and coke Determination of abrasion index of coal |
| VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| BS EN 14587-1:2007 | Railway applications. Track. Flash butt welding of rails New R220, R260, R260Mn and R350HT grade rails in a fixed plant |
| 07/30161097 DC : 0 | EN ISO 14310 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT PACKERS AND BRIDGE PLUGS |
| 06/30143291 DC : DRAFT MAY 2006 | ISO 5182 - WELDING - MATERIALS FOR RESISTANCE WELDING ELECTRODES AND ANCILLARY EQUIPMENT |
| 16/30290361 DC : 0 | BS EN ISO 6507-3 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| API SPEC 19OH : 2018 | OPENHOLE ISOLATION EQUIPMENT |
| 14/30278521 DC : 0 | BS EN ISO 18556 - DENTISTRY - INTRAORAL SPATULAS |
| I.S. EN 13463-1:2009 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
| I.S. EN ISO 1562:2004 | DENTISTRY - CASTING GOLD ALLOYS |
| BS EN ISO 12690:2010 | Metallic and other inorganic coatings. Thermal spray coordination. Tasks and responsibilities |
| DIN EN ISO 16635-1:2014-09 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
| BS ISO 17218:2014 | Sterile acupuncture needles for single use |
| DIN EN ISO 16859-2:2016-02 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES (ISO 16859-2:2015) |
| BS EN 4700-004:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire |
| 09/30196832 DC : 0 | BS ISO 12690 - THERMAL SPRAYING - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
| 11/30215841 DC : 0 | BS EN ISO 14457 - DENTISTRY - HAND PIECES AND MOTORS |
| BIS IS 1239-2 : 2011 AMD 1 2012 | STEEL TUBES, TUBULARS AND OTHER STEEL FITTINGS - SPECIFICATION - PART 2: STEEL PIPE FITTINGS |
| BS ISO 17918:2015 | Corrosion of metals and alloys. Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement |
| BS ISO 12900:2015 | Hard coal. Determination of abrasiveness |
| 15/30285035 DC : 0 | BS EN ISO 14917 - THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
| BS ISO 9154:2016 | Aerospace. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification |
| I.S. EN ISO 1797-1:2011 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 1: SHANKS MADE OF METALS |
| 04/30074924 DC : DRAFT JUNE 2004 | EN ISO 6508-3 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION AND REFERENCE BLOCKS (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| CEI EN 50340 : 2011 | HYDRAULIC CABLE CUTTING DEVICES - DEVICES TO BE USED ON ELECTRICAL INSTALLATIONS WITH NOMINAL VOLTAGE UP TO AC 30 KV |
| 07/30154260 DC : 0 | BS ISO 23848-1 - MACHINE TOOLS - BALL SPLINES - PART 1: CLASSIFICATION AND GEOMETRICAL REQUIREMENTS |
| I.S. EN 843-4:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS |
| I.S. EN ISO 898-6:1996 | MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| BS EN 20898-6:1992 | Mechanical properties of fasteners Nuts with specified proof load values. Fine pitch thread |
| 13/30286988 DC : 0 | BS EN 16662 - ROAD VEHICLES - SUPPLEMENTARY GRIP DEVICES FOR TYRES OF PASSENGER CARS AND LIGHT DUTY VEHICLES - SAFETY REQUIREMENTS AND TEST METHOD |
| 17/30346741 DC : 0 | BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
| I.S. EN 10109-2:1995 | METALLIC MATERIALS - HARDNESS TEST - PART 2: VERIFICATION OF ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| 05/30128683 DC : DRAFT FEB 2005 | ISO 5857 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1250 MPA - PROCUREMENT SPECIFICATION |
| I.S. EN ISO 1133:2005 | PLASTICS - DETERMINATION OF THE MELT-MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
| 09/30193829 DC : 0 | BS EN ISO 1797-1 - DENTAL ROTARY INSTRUMENTS - SHANKS - PART 1: SHANKS MADE OF METALS |
| BS EN 4700-002:2016 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
| DIN EN ISO 18556:2016-09 | DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016) |
| PREN 14399-9 : DRAFT 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| BS EN ISO 9015-1:2011 | Destructive tests on welds in metallic materials. Hardness testing Hardness test on arc welded joints |
| 11/30254171 DC : 0 | BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 15/30269176 DC : 0 | BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS |
| ISO 10432:2004 | Petroleum and natural gas industries — Downhole equipment — Subsurface safety valve equipment |
| 06/19981869 DC : DRAFT OCT 2006 | BS ISO 16877 - SHORT LINK CHAIN FOR LIFTING PURPOSES - GRADE TH, FINE TOLERANCE FOR MANUALLY OPERATED CHAIN HOISTS |
| 12/30245294 DC : 0 | BS ISO 16635-1 - DENTISTRY - DENTAL DAM TECHNIQUE - PART 1: HOLE PUNCH |
| 07/30162661 DC : 0 | BS ISO 14705 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR HARDNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE |
| DIN EN 14587-2:2009-08 | Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
| 16/30339349 DC : DRAFT APR 2016 | BS EN ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| BS ISO 5857:2008 | Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1250 MPa. Procurement specification |
| 11/30210148 DC : 0 | BS EN ISO 18265 - METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
| API 5DP : 2010(R2015) | SPECIFICATION FOR DRILL PIPE |
| DIN EN ISO 1797-3:2013-06 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS (ISO 1797-3:2013) |
| BS 5600-3.11.1:1991 | Powder metallurgical materials and products. Methods of testing sintered metal material and products, excluding hard metals. Determination of apparent hardness. Materials of essentially uniform section hardness |
| ISO 8535-1:2016 | Diesel engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall tubes |
| 02/703231 DC : DRAFT FEB 2002 | BS EN ISO 15156-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S- CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS |
| ISO 10384:2012 | Hot-rolled carbon steel sheet as defined by chemical composition |
| 14/30281833 DC : 0 | BS EN ISO 17509 - DENTISTRY - TORQUE TRANSMITTER FOR HANDPIECES USED FOR IMPLANTATION |
| 06/19981867 DC : DRAFT OCT 2006 | BS ISO 16872 - SHORT LINK CHAIN FOR LIFTING PURPOSES - GRADE VH, FINE TOLERANCE FOR MANUALLY OPERATED CHAIN HOISTS |
| 02/712761 DC : DRAFT OCT 2002 | ISO 15509-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 2: FITTINGS |
| 14/30272288 DC : 0 | BS ISO 18203 - STEELS - DETERMINATION OF THE THICKNESS OF SURFACE-HARDENED LAYERS |
| 10/30165712 DC : 0 | BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD |
| 16/30328578 DC : 0 | BS ISO 14705 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR HARDNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE |
| 17/30359115 DC : 0 | BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| 17/30312468 DC : 0 | BS ISO 15461 - STEEL FORGINGS - TESTING FREQUENCY, SAMPLING CONDITIONS AND TEST METHODS FOR MECHANICAL TESTS |
| I.S. EN ISO 19490:2017 | DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
| BS EN ISO 9015-2:2016 | Destructive tests on welds in metallic materials. Hardness testing Microhardness testing of welded joints |
| BS ISO 23848-1:2009 | Machine tools. Ball splines General characteristics and requirements |
| BS EN ISO 5182:2009 | Resistance welding. Materials for electrodes and ancillary equipment |
| PREN 12451 : DRAFT 2010 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| BS EN 16771:2016 | Railway applications. Infrastructure. Aluminothermic welding of grooved rails |
| BS EN 15551:2017 | Railway applications. Railway rolling stock. Buffers |
| 99/121962 DC : DRAFT JUN 1999 | EN ISO 3126 - PLASTICS PIPING SYSTEMS - PLASTICS PIPING COMPONENTS - MEASUREMENT AND DETERMINATION OF DIMENSIONS |
| API 17G:2006 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| 05/30126202 DC : 0 | EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| BS EN 50109-2-2 : 1996 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-2: PARTICULAR REQUIREMENTS FOR RADIO FREQUENCY CONNECTORS AND CONCENTRIC CONTACTS - OPEN THROAT TOOLS WITH REMOVABLE AND INTERCHANGEABLE DIES, SIZES A TO G, Q TO T, V AND W |
| ISO 19207:2016 | Thermal spraying — Classification method of adhesive strength by indentation |
| BS EN ISO 14271:2017 | Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds |
| BS EN ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread |
| ISO 16468:2015 | Investment castings (steel, nickel alloys and cobalt alloys) — General technical requirements |
| DIN EN ISO 6507-3:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| 17/30351887 DC : 0 | BS EN 1015-11 - METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
| API SPEC 14L : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| API 17G : 2006 : R2011 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| BS EN ISO 12679:2015 | Thermal spraying. Recommendations for thermal spraying |
| DIN EN ISO 19490:2016-07 (Draft) | DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
| API 11D1 CHINESE : 2009 | PACKERS AND BRIDGE PLUGS |
| I.S. EN 4700-001:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| I.S. EN ISO 16635-1:2014 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
| ISO 15461:2018 | Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests |
| ISO 9140:1998 | Aerospace — Nuts, plain or slotted (castellated) — Test methods |
| I.S. EN 4677-001:2012 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTION - JOINTS OF METALLIC MATERIALS BY ELECTRON BEAM WELDING - PART 001: QUALITY OF WELDED ASSEMBLIES |
| ISO 28079:2009 | Hardmetals — Palmqvist toughness test |
| ISO 6507-4:2018 | Metallic materials — Vickers hardness test — Part 4: Tables of hardness values |
| ISO 17218:2014 | Sterile acupuncture needles for single use |
| ISO 6207:1992 | Seamless nickel and nickel alloy tube |
| IEC 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| ISO 14705:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature |
| ONORM EN ISO 6506-2 : 2015 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| I.S. EN 4700-006:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| ISO 716:1986 | Metallic materials — Hardness test — Verification of Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K) |
| ISO 23848-1:2009 | Machine tools — Ball splines — Part 1: General characteristics and requirements |
| EN ISO 1797:2017 | Dentistry - Shanks for rotary and oscillating instruments (ISO 1797:2017) |
| EN 14587-1:2007 | Railway applications - Track - Flash butt welding of rails - Part 1: New R220, R260, R260Mn and R350HT grade rails in a fixed plant |
| I.S. EN 10225:2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN ISO 7492:2018 | DENTISTRY - DENTAL EXPLORER (ISO 7492:2018) |
| ISO 17804:2005 | Founding — Ausferritic spheroidal graphite cast irons — Classification |
| ISO 7492:2018 | Dentistry — Dental explorer |
| DIN EN ISO 6507-2:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2005) |
| I.S. EN 1057:2006 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
| ISO 14271:2017 | Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds |
| I.S. EN ISO 17078-3:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| ISO 3183-3:1999 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C |
| I.S. EN ISO 7091:2000 | PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C |
| IEC 62899-201:2016 | Printed electronics - Part 201: Materials - Substrates |
| DIN EN 1669:1997-02 | ALUMINIUM AND ALUMINIUM ALLOYS - TEST METHODS - EARING TEST FOR SHEET AND STRIP |
| I.S. EN 10132-1:2000 | COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| DIN EN ISO 7093-1:2000-11 | PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A |
| DIN EN 10328:2005-04 | Iron and steel - Determination of the conventional depth of hardening after surface heating |
| DIN EN 1337-2:2004-07 | Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2004 |
| DIN EN 12166:2015-12 (Draft) | COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES |
| ISO 8748:2007 | Spring-type straight pins — Coiled, heavy duty |
| BS EN 1043-2:1997 | Destructive tests on welds in metallic materials. Hardness testing Micro hardness testing on welded joints |
| BS EN 12735-2:2016 | Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration Tubes for equipment |
| BS EN ISO 642:1999 | Steel hardenability test by end quenching (Jominy test) |
| ISO 1133-1:2011 | Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method |
| ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws |
| BS EN ISO 14923:2003 | Thermal spraying. Characterization and testing of thermally sprayed coatings |
| BS EN 14436:2004 | Copper and copper alloys. Electrolytically tinned strip |
| BS EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
| BS EN 12168:1998 | Copper and copper alloys. Hollow rod for free machining purposes |
| ISO 16635-1:2013 | Dentistry — Dental rubber dam technique — Part 1: Hole punch |
| ISO 9015-1:2001 | Destructive tests on welds in metallic materials — Hardness testing — Part 1: Hardness test on arc welded joints |
| BS EN 657:2005 | Thermal spraying. Terminology, classification |
| ISO 9015-2:2016 | Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints |
| ISO 2702:2011 | Heat-treated steel tapping screws — Mechanical properties |
| ISO 7090:2000 | Plain washers, chamfered — Normal series — Product grade A |
| EN 60372:2004 | Locking devices for ball and socket couplings of string insulator units - Dimensions and tests |
| EN ISO 6506-2:2014 | Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014) |
| EN ISO 12156-1:2016 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
| EN ISO 1522:2006 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
| EN ISO 8748:2007 | Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007) |
| EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| EN ISO 16635-1:2014 | Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-1:2013) |
| EN ISO 2639:2002 | Steels - Determination and verification of the depth of carburized and hardened cases (ISO 2639:2002) |
| EN ISO 7085 : 1999 | MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS |
| EN ISO 16744:2003 | Dentistry - Base metal materials for fixed dental restorations (ISO 16744:2003) |
| EN ISO 14923:2003 | Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) |
| EN ISO 17937:2015 | Dentistry - Osteotome (ISO 17937:2015) |
| I.S. EN ISO 7094:2000 | PLAIN WASHERS - EXTRA LARGE SERIES - PRODUCT GRADE C |
| EN ISO 10432:2004 | Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
| I.S. EN ISO 2639:2002 | STEELS - DETERMINATION AND VERIFICATION OF THE DEPTH OF CARBURIZED AND HARDENED CASES |
| I.S. EN 10328:2005 | IRON AND STEEL - DETERMINATION OF THE CONVENTIONAL DEPTH OF HARDENING AFTER SURFACE HEATING |
| API 2SC : 2010 | MANUFACTURE OF STRUCTURAL STEEL CASTINGS FOR PRIMARY OFFSHORE APPLICATIONS |
| BIS IS 1501-2 : 2013 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| BS ISO 20826:2006 | Automotive LPG components. Containers |
| 08/30180052 DC : DRAFT MAR 2008 | BS EN 50340 AMD1 - HYDRAULIC CABLE CUTTING DEVICES - DEVICES TO BE USED ON ELECTRICAL INSTALLATIONS WITH NOMINAL VOLTAGE UP TO AC 30 KV |
| 15/30282343 DC : 0 | BS ISO 18746 - TRADITIONAL CHINESE MEDICINE - INTRADERMAL ACUPUNCTURE NEEDLES |
| 03/100442 DC : DRAFT MAY 2003 | IEC 60352-2 ED.2 - SOLDERLESS CONNECTIONS - PART 2: SOLDERLESS CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| 15/30317619 DC : 0 | BS EN ISO 5470-1 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER |
| DIN 17750:2002-09 | Wrought nickel and nickel alloys sheet, plate and strip - Requirements and testing |
| BS 7251-7:1990 | Orthopaedic joint prostheses Guide to hip joint simulators |
| 12/30245297 DC : 0 | BS EN ISO 16635-2 - DENTISTRY - RUBBER DAM TECHNIQUE - PART 2: RUBBER DAM CLAMP FORCEPS |
| BS ISO 12670 : 2011 COR 2015 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| 16/30302544 DC : 0 | BS EN ISO 9873 - DENTISTRY - INTRA-ORAL MIRRORS |
| 10/30196823 DC : 0 | BS ISO 12670 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| ISO 898-3:2018 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes |
| I.S. EN ISO 5182:2016 | RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
| 04/30118524 DC : DRAFT AUG 2004 | EN 1057 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
| 08/30179025 DC : DRAFT MAR 2008 | BS EN ISO 10673 - PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES - SMALL, NORMAL AND LARGE SERIES - PRODUCT GRADE A |
| BS EN 14587-3:2012 | Railway applications. Track. Flash butt welding of rails Welding in association with crossing construction |
| I.S. EN ISO 12670:2015 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
| BS EN ISO 22068:2014 | Sintered-metal injection-moulded materials. Specifications |
| DIN 21530-4:2016-09 | MINE SUPPORT - PART 4: TESTING |
| 09/30208233 DC : 0 | BS ISO 2702 - HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
| BS EN 16725:2016 | Railway applications. Track. Restoration and repair of manganese crossings |
| PREN 485-2 : DRAFT 99 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
| DIN EN 10088-4:2010-01 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| 13/30264734 DC : 0 | BS ISO 17918 - EVALUATION OF SELECTIVE CORROSION OF ALLOYS BY VISUAL INSPECTION AND HARDNESS MEASUREMENT |
| 14/30304003 DC : 0 | BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES |
| API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| 10/30215691 DC : DRAFT NOV 2010 | BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| DIN EN ISO 12679:2015-12 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| 99/710776 DC : DRAFT JULY 1999 | PREN 485-2 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
| 02/120925 DC : DRAFT MAR 2002 | ISO/DIS 11443 - PLASTICS - DETERMINATION OF THE FLUIDITY OF PLASTICS USING CAPILLARY AND SLIT-DIE RHEOMETERS |
| DIN 13950-1:1990-05 | DENTISTRY - DENTAL ROTARY INSTRUMENTS - SHANKS |
| 14/30297210 DC : 0 | BS EN 16273 - RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS |
| 09/30183435 DC : 0 | BS EN ISO 1133-1 - PLASTICS DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD |
| ISO 6506-2:2017 | Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines |
| ISO 7741:1986 | Instruments for surgery — Scissors and shears — General requirements and test methods |
| 02/702536 DC : DRAFT FEB 2002 | PREN ISO 15156-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS |
| 09/30180393 DC : 0 | BS EN ISO 10451 - DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
| 13/30259011 DC : 0 | BS ISO 17218 - STERILE ACUPUNCTURE NEEDLES FOR SINGLE USE |
| BS ISO 28079:2009 | Hardmetals. Palmqvist toughness test |
| NF ENV 1090-1 : 96 FD | EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS |
| 13/30264459 DC : 0 | BS EN ISO 6508-2 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| 16/30310674 DC : 0 | BS EN ISO 14457 - DENTISTRY - HANDPIECES AND MOTORS |
| BS EN 14587-2:2009 | Railway applications. Track. Flash butt welding of rails New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
| 13/30268502 DC : 0 | BS ISO 16877 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - FINE TOLERANCE HOIST CHAINS FOR HAND OPERATED CHAIN HOISTS - GRADE TH |
| 11/30211730 DC : 0 | BS ISO 9352 - PLASTICS - DETERMINATION OF RESISTANCE TO WEAR BY ABRASIVE WHEELS |
| DIN EN ISO 9015-1:2011-05 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
| BS ISO 9352:2012 | Plastics. Determination of resistance to wear by abrasive wheels |
| BS 3900-E15(1997) : 1997 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE RUBBER WHEEL) |
| BS EN ISO 1133-1:2011 | Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method |
| 04/30109383 DC : DRAFT MAY 2004 | ISO 8535-1 - COMPRESSION-IGNITION ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| BS ISO 3183-3:1999 | Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C |
| 12/30250146 DC : 0 | BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS |
| 17/30323194 DC : 0 | BS EN ISO 20569 - DENTISTRY - TREPHINE BURS |
| DD ENV 1090-1:1998 | Execution of steel structures General rules and rules for buildings (together with United Kingdom national application document) |
| 11/30254168 DC : 0 | BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| BS EN ISO 15156-3:2015 | Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| ISO 6507-3:2018 | Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks |
| BS EN 50109-2-1:1996 | Radio frequency connectors and concentric contacts. Open throat tools with fixed dies, sizes A to E, V and WHand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements |
| 17/30323197 DC : 0 | BS EN ISO 20570 - DENTISTRY - ORAL SURGICAL SCALPEL HANDLE |
| 04/301144 DC : DRAFT JAN 2004 | ISO 6931-2 - STAINLESS STEELS FOR SPRINGS - PART 2: NARROW STRIP |
| 05/30136401 DC : DRAFT JULY 2005 | ISO 8642 - AEROSPACE - SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERATURE GREATER THAN 425 DEGREES C - TEST METHODS |
| BS ISO 16872:2015 | Round steel short link chains for lifting purposes. Fine tolerance hoist chains for hand operated chain hoists. Grade VH |
| 03/106174 DC : DRAFT APR 2003 | ISO 22826 - DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING OF NARROW WELDED JOINTS BY LASER AND ELECTRON BEAM (VICKERS AND KNOOP HARDNESS TESTS) |
| 10/30229550 DC : 0 | BS EN 12451 REV - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| GOST R ISO 8891 : 2005 | DENTAL CASTING ALLOYS WITH NOBLE METAL CONTENT OF AT LEAST 25% BUT LESS THAN 75% - TECHNICAL REQUIREMENTS - TEST METHODS |
| I.S. EN 60372:2004 | LOCKING DEVICES FOR BALL AND SOCKET COUPLINGS OF STRING INSULATOR UNITS - DIMENSIONS AND TESTS |
| BS ISO 12156-1:1997 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
| 13/30242622 DC : 0 | BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
| BS ISO 20267:2017 | Thermal spraying. Determination of interfacial toughness of ceramic coatings by indentation |
| BS ISO 16468:2015 | Investment castings (steel, nickel alloys and cobalt alloys). General technical requirements |
| BS ISO 22826:2005 | Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
| 04/30103964 DC : DRAFT MAY 2004 | BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
| 04/30107683 DC : DRAFT DEC 2004 | BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
| API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
| BS EN ISO 9873:2017 | Dentistry. Intra-oral mirrors |
| BS 7598(1992) : 1992 AMD 8488 | SPECIFICATION FOR MECHANICAL PROPERTIES OF HEAT-TREATED STEEL TAPPING SCREWS |
| API 17G : 2006 : R2016 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| 08/30141132 DC : DRAFT APR 2008 | BS EN ISO 10423 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| ISO 674:1988 | Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K) |
| 04/30123693 DC : DRAFT OCT 2004 | EN 15048-1 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| NF EN ISO 11961 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| IS 1367 : Part 3 : 2017 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS |
| ISO 14190:1998 | Aerospace — Airframe rolling bearings: ball and spherical roller bearings — Technical specification |
| BS EN 10088-4:2009 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| BS EN ISO 14917:2017 | Thermal spraying. Terminology, classification |
| API 17J REDLINE : 2008 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| API 14A RUSSIAN : 2001 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| API 19G3 : 2011 | RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| ISO 13847:2013 | Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines |
| ISO 6621-3:2000 | Internal combustion engines — Piston rings — Part 3: Material specifications |
| BS EN ISO 7492:2018 | Dentistry. Dental explorer |
| NF EN ISO 12690 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
| BS IEC 62899-201 : 2016 | PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES |
| I.S. EN 15551:2017 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| ISO 1355:1989 | Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T) |
| I.S. EN ISO 14271:2017 | RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS (ISO 14271:2017) |
| I.S. EN ISO 14918:1999 | THERMAL SPRAYING - APPROVAL TESTING OF THERMAL SPRAYERS |
| BS ISO 4960:2007 | Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % |
| ISO 13584-511:2006 | Industrial automation systems and integration — Parts library — Part 511: Mechanical systems and components for general use — Reference dictionary for fasteners |
| ISO 7689:2008 | Aerospace — Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa — Procurement specification |
| ISO 15590-3:2004 | Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 3: Flanges |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| 17/30363994 DC : 0 | BS EN 16662-1 - ROAD VEHICLES - SUPPLEMENTARY GRIP DEVICES FOR TYRES OF PASSENGER CARS AND LIGHT DUTY VEHICLES - PART 1: GENERAL SAFETY AND PERFORMANCE REQUIREMENTS |
| 17/30358164 DC : 0 | BS EN 14587-1 - RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF NEW RAILS - PART 1: R220, R260, R260MN, R320CR, R350HT, R350LHT, R370CRHT AND R400HT GRADE RAILS IN A FIXED PLANT |
| CEI EN 60352-1 : 1998 | SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| DIN EN 14587-1:2016-08 (Draft) | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 1: NEW R220, R260, R260MN AND R350HT GRADE RAILS IN FIXED PLANT |
| ASTM E 92 : 2017 : REDLINE | Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
| PREN 12449 : DRAFT 2011 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| EN ISO 14271:2017 | Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017) |
| I.S. EN ISO 12156-1:2016 | DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD (ISO 12156-1:2016) |
| ISO 4739:1985 | Wrought copper and copper alloy products — Selection and preparation of specimens and test pieces for mechanical testing |
| ISO 1562:2004 | Dentistry — Casting gold alloys |
| ISO 20826:2006 | Automotive LPG components — Containers |
| ISO 6932:2014 | Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
| ISO 12156-1:2016 | Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method |
| I.S. EN ISO 12690:2010 | METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
| I.S. EN 4700-005:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| DIN EN ISO 3887:2016-08 (Draft) | STEELS - DETERMINATION OF DEPTH OF DECARBURIZATION |
| I.S. EN ISO 6507-3:2018 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6507-3:2018) |
| I.S. EN 50109-2-5:1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-5: PARTICULAR REQUIREMENTS FOR THE TERMINATION OF TWIN-AX CABLE FOR DATABUS APPLICATIONS |
| I.S. EN 14587-1:2007 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 1: NEW R220, R260, R260MN AND R350HT GRADE RAILS IN A FIXED PLANT |
| I.S. EN ISO 6506-2:2014 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| DIN EN ISO 1522:2007-04 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
| DIN EN ISO 14233:2003-10 | DENTISTRY - POLYMER-BASED DIE MATERIALS |
| DIN EN ISO 1797-1:2011-11 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 1: SHANKS MADE OF METALS (ISO 1797-1:2011) |
| DIN EN 485-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DIN EN 10151:2003-02 | STAINLESS STEEL STRIP FOR SPRINGS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 818-7:2008-07 | Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) (includes Amendment A1:2008) |
| DIN EN ISO 7093-2:2000-11 | PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C |
| DIN EN 10225:2009-10 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| DIN EN ISO 18265:2014-02 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
| BS EN 12811-3:2002 | Temporary works equipment Load testing |
| BS EN 13605:2013 | Copper and copper alloys. Copper profiles and profiled wire for electrical purposes |
| BS EN 12805:2002 | Automotive LPG components. Containers |
| BS EN ISO 10432:2004 | Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
| ISO 19715:2017 | Dentistry — Filling instrument with contra angle |
| ISO 12679:2011 | Thermal spraying — Recommendations for thermal spraying |
| BS EN 12735-1:2016 | Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration Tubes for piping systems |
| BS EN 14163:2001 | Petroleum and natural gas industries. Pipeline transportation systems. Welding of pipelines |
| ISO 13337:2009 | Spring-type straight pins — Slotted, light duty |
| BS EN 14870-3:2006 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Flanges |
| ISO 10673:2009 | Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A |
| BS EN ISO 15156-2:2015 | Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons |
| BS EN 12513:2011 | Founding. Abrasion resistant cast irons |
| ISO 14727:1998 | Dental implants — Prefabricated parts connecting suprastructures to dental implants — Contents of technical file |
| BS EN ISO 13628-7:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems |
| ISO 17937:2015 | Dentistry — Osteotome |
| ISO 15156-3:2015 | Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| BS EN 23878:1993 | Hardmetals. Vickers hardness test |
| ISO 12690:2010 | Metallic and other inorganic coatings — Thermal spray coordination — Tasks and responsibilities |
| ISO 16744:2003 | Dentistry — Base metal materials for fixed dental restorations |
| BS EN ISO 5470-1:2016 | Rubber- or plastics-coated fabrics. Determination of abrasion resistance Taber abrader |
| BS EN ISO 7090:2000 | Plain washers, chamfered. Normal series. Product grade A |
| BS EN ISO 14233:2003 | Dentistry. Polymer-based die materials |
| ISO 8752:2009 | Spring-type straight pins — Slotted, heavy duty |
| ISO 7153-1:2016 | Surgical instruments — Materials — Part 1: Metals |
| ISO 15087-1:1999 | Dental elevators — Part 1: General requirements |
| ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
| ISO 1797-3:2013 | Dentistry — Shanks for rotary instruments — Part 3: Shanks made of ceramics |
| ISO 21672-1:2012 | Dentistry — Periodontal probes — Part 1: General requirements |
| ISO 8750:2007 | Spring-type straight pins — Coiled, standard duty |
| ISO 14233:2003 | Dentistry — Polymer-based die materials |
| BS EN ISO 4498:2010 | Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness |
| BS EN ISO 4516:2002 | Metallic and other inorganic coatings. Vickers and Knoop microhardness tests |
| EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
| BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN ISO 1562:2004 | Dentistry. Casting gold alloys |
| ISO 16070:2005 | Petroleum and natural gas industries — Downhole equipment — Lock mandrels and landing nipples |
| BS EN 12451:2012 | Copper and copper alloys. Seamless, round tubes for heat exchangers |
| I.S. EN ISO 3506-2:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| BS EN ISO 15136-2:2006 | Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| BS EN ISO 1522:2006 | Paints and varnishes. Pendulum damping test |
| BS EN 818-7 : 2002 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
| BS EN 20898-2:1994 | Mechanical properties of fasteners Nuts with specified proof load values. Coarse thread |
| ISO 7093-2:2000 | Plain washers — Large series — Part 2: Product grade C |
| ISO 3878:1983 | Hardmetals — Vickers hardness test |
| BS EN ISO 15087-1:2001 | Dental elevators General requirements |
| BS EN ISO 14727:1999 | Dental implants. Prefabricated parts connecting suprastructures to dental implants. Contents of technical file |
| BS EN 12390-4:2000 | Testing hardened concrete Compressive strength. Specification for testing machines |
| BS EN ISO 16070:2005 | Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples |
| ISO 14917:2017 | Thermal spraying — Terminology, classification |
| ISO 16635-2:2014 | Dentistry — Dental rubber dam instruments — Part 2: Clamp forceps |
| BS EN 1057 : 2006 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
| BS EN ISO 1133:2005 | Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| ISO 8891:1998 | Dental casting alloys with noble metal content of at least 25 % but less than 75 % |
| EN 12735-1:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
| ISO 15136-2:2006 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
| ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners with specified hardness classes — Coarse thread and fine pitch thread |
| ISO 5470-1:2016 | Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 1: Taber abrader |
| ISO 1797-1:2011 | Dentistry — Shanks for rotary instruments — Part 1: Shanks made of metals |
| BS EN 15311:2007 | Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
| ISO 16859-2:2015 | Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices |
| ISO 18556:2016 | Dentistry — Intraoral spatulas |
| ISO 14923:2003 | Thermal spraying — Characterization and testing of thermally sprayed coatings |
| ISO 4498:2010 | Sintered metal materials, excluding hardmetals — Determination of apparent hardness and microhardness |
| ISO 7093-1:2000 | Plain washers — Large series — Part 1: Product grade A |
| I.S. EN 12735-1:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 1: TUBES FOR PIPING SYSTEMS |
| ISO 4498-1:1990 | Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness |
| ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings |
| ISO 4516:2002 | Metallic and other inorganic coatings — Vickers and Knoop microhardness tests |
| ISO 898-6:1994 | Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread |
| ISO 3126:2005 | Plastics piping systems — Plastics components — Determination of dimensions |
| BS EN ISO 8748:2007 | Spring-type straight pins. Coiled, heavy duty |
| ISO 14998:2013 | Petroleum and natural gas industries — Downhole equipment — Completion accessories |
| ISO 14310:2008 | Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs |
| ISO 6508-2:2015 | Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters |
| ISO 15156-2:2015 | Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
| ISO 1133:2005 | Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| ISO 15098-1:1999 | Dental tweezers — Part 1: General requirements |
| ISO 13625:2002 | Petroleum and natural gas industries — Drilling and production equipment — Marine drilling riser couplings |
| BS EN ISO 2702:2011 | Heat-treated steel tapping screws. Mechanical properties |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| BS EN 3299:2007 | Aerospace series. Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated. Technical specification |
| ISO 5182:2016 | Resistance welding — Materials for electrodes and ancillary equipment |
| BS EN 13599:2014 | Copper and copper alloys. Copper plate, sheet and strip for electrical purposes |
| BS EN ISO 3650:1999 | Geometrical product specifications (GPS). Length standards. Gauge blocks |
| BS EN 13601:2013 | Copper and copper alloys. Copper rod, bar and wire for general electrical purposes |
| BS EN ISO 2639:2002 | Steels. Determination and verification of the depth of carburized and hardened cases |
| BS EN ISO 10451:2010 | Dentistry. Contents of technical file for dental implant systems |
| BS EN 12452:2012 | Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers |
| ISO 22068:2012 | Sintered-metal injection-moulded materials — Specifications |
| BS EN 1652:1998 | Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
| I.S. EN ISO 3506-1:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| ISO 19490:2017 | Dentistry — Sinus membrane elevator |
| BS EN 12166:2011 | Copper and copper alloys. Wire for general purposes |
| BS EN ISO 3126:2005 | Plastics piping systems. Plastics components. Determination of dimensions |
| ISO 17078-3:2009 | Petroleum and natural gas industries — Drilling and production equipment — Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
| BS EN ISO 8751:2007 | Spring-type straight pins. Coiled, light duty |
| ISO 12670:2011 | Thermal spraying — Components with thermally sprayed coatings — Technical supply conditions |
| ISO 2639:2002 | Steels — Determination and verification of the depth of carburized and hardened cases |
| ISO 7089:2000 | Plain washers — Normal series — Product grade A |
| BS EN 13604:2013 | Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| BS EN ISO 8891:2000 | Dental casting alloys with noble metal content of at least 25% but less than 75% |
| ISO 10451:2010 | Dentistry — Contents of technical file for dental implant systems |
| EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| BS EN ISO 13337:2009 | Spring-type straight pins. Slotted, light duty |
| ISO 17945:2015 | Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
| ISO 13628-2:2006 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 2: Unbonded flexible pipe systems for subsea and marine applications |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| DIN EN ISO 80079-36:2016-12 | Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016); German version EN ISO 80079-36:2016 |
| DIN EN ISO 3887:2003-10 | STEELS - DETERMINATION OF DEPTH OF DECARBURIZATION |
| EN 20898-6 : 1992 | MECHANICAL PROPERTIES OF FASTENERS - NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| EN 15594:2009 | Railway applications - Track - Restoration of rails by electric arc welding |
| EN 772-1:2011+A1:2015 | Methods of test for masonry units - Part 1: Determination of compressive strength |
| EN ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016) |
| EN ISO 7089:2000 | Plain washers - Normal series - Product grade A (ISO 7089:2000) |
| EN 14587-2:2009 | Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
| EN ISO 22068:2014 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| EN ISO 17945:2015 | Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015) |
| EN 14399-1:2015 | High-strength structural bolting assemblies for preloading - Part 1: General requirements |
| EN 14798:2005 | Glass packaging - Hand-held crown bottle openers - Dimensions |
| EN 24498-1 : 1993 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS - MATERIALS OF ESSENTIALLY UNIFORM SECTION HARDNESS |
| EN 3908:2017 | Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated |
| EN ISO 1133:2005 | Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005) |
| EN ISO 7093-2:2000 | Plain washers - Large series - Part 2: Product grade C (ISO 7093-2:2000) |
| EN ISO 3126:2005 | Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005) |
| EN 13599:2014 | Copper and copper alloys - Copper plate, sheet and strip for electrical purposes |
| EN ISO 12679:2015 | Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
| EN 10225:2009 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN ISO 18556:2016 | Dentistry - Intraoral spatulas (ISO 18556:2016) |
| EN ISO 8752:2009 | Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009) |
| EN ISO 4516:2002 | Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002) |
| EN ISO 7091:2000 | Plain washers - Normal series - Product grade C (ISO 7091:2000) |
| EN 14616:2004 | Thermal spraying - Recommendations for thermal spraying |
| EN ISO 17078-3:2009 | Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009) |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| EN 4700-005:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock |
| EN ISO 16859-2:2015 | Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015) |
| EN ISO 7153-1:2016 | Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016) |
| EN ISO 10510:2011 | Tapping screw and washer assemblies with plain washers (ISO 10510:2011) |
| EN ISO 10673:2009 | Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009) |
| EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| EN ISO 5182:2016 | Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016) |
| EN 14399-9:2018 | High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies |
| EN ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| EN 23878:1993 | Hardmetals - Vickers hardness test (ISO 3878:1983) |
| EN 16451:2015 | Railway applications - Braking - Brake pad holder |
| EN ISO 14727:1998/AC:1998 | DENTAL IMPLANTS - PREFABRICATED PARTS CONNECTING SUPRASTRUCTURES TO DENTAL IMPLANTS - CONTENTS OF TECHNICAL FILE |
| EN 16602-70-46:2014 | Space product assurance - Requirements for manufacturing and procurement of threaded fasteners |
| EN 4700-003:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube |
| EN ISO 15087-1:2001 | Dental elevators - Part 1: General requirements (ISO 15087-1:1999) |
| EN 13604:2013 | Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| EN ISO 19490:2017 | Dentistry - Sinus membrane elevator (ISO 19490:2017) |
| EN ISO 10666:1999 | Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999) |
| EN ISO 18265:2013 | Metallic materials - Conversion of hardness values (ISO 18265:2013) |
| EN ISO 3887:2018 | Steels - Determination of the depth of decarburization (ISO 3887:2017) |
| EN 843-4:2005 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness |
| EN ISO 1133-1:2011 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
| EN ISO 4498:2010 | Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
| EN ISO 14310:2008 | Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008) |
| EN ISO 13628-7:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005) |
| EN ISO 14233:2003 | Dentistry - Polymer-based die materials (ISO 14233:2003) |
| EN 20898-2 : 1993 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992) |
| EN ISO 8751:2007 | Spring-type straight pins - Coiled, light duty (ISO 8751:2007) |
| EN 657:2005 | Thermal spraying - Terminology, classification |
| EN ISO 1797-3:2013 | Dentistry - Shanks for rotary instruments - Part 3: Shanks made of ceramics (ISO 1797-3:2013) |
| EN ISO 10451:2010 | Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
| EN ISO 3650:1998 | Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998) |
| EN ISO 14917:2017 | Thermal spraying - Terminology, classification (ISO 14917:2017) |
| EN ISO 10669:1999 | Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999) |
| EN 15311:2007 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions |
| EN 4700-007:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock |
| EN 14870-3:2006 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004, modified) |
| EN ISO 7090:2000 | Plain washers, chamfered - Normal series - Product grade A (ISO 7090:2000) |
| EN 14436:2004 | Copper and copper alloys - Electrolytically tinned strip |
| EN 818-7:2002+A1:2008 | Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
| EN ISO 7092:2000 | Plain washers - Small series - Product grade A (ISO 7092:2000) |
| EN ISO 7093-1:2000 | Plain washers - Large series - Part 1: Product grade A (ISO 7093-1:2000) |
| EN 16725:2016 | Railway applications - Track - Restoration and repair of manganese crossings |
| EN ISO 642:1999 | Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999) |
| EN ISO 15732:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003) |
| EN ISO 16635-2:2014 | Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps(ISO 16635-2:2014) |
| EN ISO 2702:2011 | Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011) |
| EN ISO 19715:2017 | Dentistry - Filling instrument with contra angle (ISO 19715:2017) |
| EN ISO 16070:2005 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
| EN ISO 15098-1:2001 | Dental tweezers - Part 1: General requirements (ISO 15098-1:2000) |
| EN 4677-001:2012 | Aerospace series - Welded and brazed assemblies for aerospace construction - Joints of metallic materials by electron beam welding - Part 001: Quality of welded assemblies |
| EN ISO 8891 : 2000 | DENTAL CASTING ALLOYS WITH NOBLE METAL CONTENT OF AT LEAST 25% BUT LESS THAN 75% |
| EN ISO 8750:2007 | Spring-type straight pins - Coiled, standard duty (ISO 8750:2007) |
| EN 3299:2007 | Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification |
| EN ISO 14998:2013 | Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013) |
| EN 14587-3:2012 | Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
| EN ISO 13337:2009 | Spring-type straight pins - Slotted, light duty (ISO 13337:2009) |
| EN ISO 1562 : 2004 | DENTISTRY - CASTING GOLD ALLOYS |
| EN ISO 15136-2:2006 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
| EN 14730-1:2017 | Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
| EN 14870-2:2004 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified) |
| EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| EN 1669:1996 | Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip |
| EN ISO 17509:2016 | Dentistry - Torque transmitter for handpieces (ISO 17509:2016) |
| EN 4700-004:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
| EN ISO 21672-1:2012 | Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012) |
| EN 4700-001:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip |
| EN ISO 13625:2002 | Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002) |
| EN ISO 5470-1:2016 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
| EN 4700-006:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings |
| EN ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| EN 16273:2014 | Railway applications - Track - Forged rail transitions |
| EN ISO 1797-1:2011 | Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals (ISO 1797-1:2011) |
| EN 3380:1996 | Aerospace series - Rings, retaining - Technical specification |
| EN ISO 12670:2015 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) |
| EN ISO 898-6:1995 | Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread (ISO 898-6:1994) |
| EN 13892-2:2002 | Methods of test for screed materials - Part 2: Determination of flexural and compressive strength |
| API 16A : 2017 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| BS EN 16451:2015 | Railway applications. Braking. Brake pad holder |
| 04/30105010 DC : DRAFT JUL 2004 | ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| BS ISO 8642:2008 | Aerospace. Self-locking nuts with maximum operating temperature greater than 425 degrees C. Test methods |
| BS A 295:1985 | Methods of test for self-locking nuts with maximum operating temperature less than or equal to 425°C |
| ISO 12891-2:2014 | Retrieval and analysis of surgical implants — Part 2: Analysis of retrieved surgical implants |
| I.S. EN 50109-2-3:1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-3: PARTICULAR REQUIREMENTS FOR CONTACTS OF ELECTRICAL CONNECTORS |
| 13/30263773 DC : 0 | BS ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| DIN EN ISO 22068:2014-06 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| 16/30339983 DC : 0 | BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
| BS EN ISO 16635-1:2014 | Dentistry. Dental rubber dam technique Hole punch |
| 14/30284697 DC : 0 | BS ISO 683-5 - HEAT TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 5: NITRIDING STEELS |
| BS EN 50109-2-3:1996 | Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements Contacts of electrical connectors |
| I.S. EN 10109-3:1995 | METALLIC MATERIALS - HARDNESS TEST - PART 3: CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| DIN EN ISO 12670:2015-12 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
| ISO 17744:2004 | Plastics — Determination of specific volume as a function of temperature and pressure (pvT diagram) — Piston apparatus method |
| 15/30303331 DC : 0 | BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| ISO 18746:2016 | Traditional Chinese medicine — Sterile intradermal acupuncture needles for single use |
| I.S. EN 4700-002:2016 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| PREN ISO 2702 : DRAFT 2009 | HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
| BS ISO 13628-7 : 2005 AMD 16887 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
| 15/30311766 DC : 0 | BS ISO 9015-2 - DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 2: MICROHARDNESS TESTING OF WELDED JOINTS |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| DIN EN 15551:2013-05 (Draft) | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| BS 2782-3 Method 370:1990 | Methods of testing plastics. Mechanical properties Determination of resistance to wear by abrasive wheels |
| BS EN 3908:2017 | Aerospace series. Nipples, lubricating, axial type, in corrosion resisting steel, passivated |
| 17/30361675 DC : 0 | BS EN 3299 - AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER-PLATED - TECHNICAL SPECIFICATION |
| I.S. EN 4700-003:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| 17/30346735 DC : 0 | BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
| BIS IS 513 : 2008 AMD 2 2016 | COLD REDUCED LOW CARBON STEEL SHEET AND STRIP |
| PREN 10088-3 : DRAFT 2011 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| DIN ISO 4498 E : 2005 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
| 17/30303088 DC : 0 | BS EN ISO 7492 - DENTISTRY - DENTAL EXPLORER |
| BS ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels Nitriding steels |
| BS EN ISO 17945:2015 | Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
| BS EN ISO 18556:2016 | Dentistry. Intraoral spatulas |
| 13/30280533 DC : 0 | BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25% |
| BS ISO 18203:2016 | Steel. Determination of the thickness of surface-hardened layers |
| 03/306713 DC : DRAFT APR 2003 | EN 657 - THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
| BS EN 4700-007:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock |
| 03/311760 DC : DRAFT JULY 2003 | ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| 09/30194594 DC : 0 | BS ISO 22394 - HARDMETALS - KNOOP HARDNESS TEST |
| DIN EN ISO 17945:2015-08 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
| 13/30252112 DC : 0 | BS EN ISO 11970 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR PRODUCTION WELDING OF STEEL CASTINGS |
| BS ISO 12679 : 2011 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
| BS EN ISO 1797-3:2013 | Dentistry. Shanks for rotary instruments Shanks made of ceramics |
| ISO 156:1982 | Metallic materials — Hardness test — Verification of Brinell hardness testing machines |
| BS 3900-E14(1997) : 1997 AMD 16870 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE-PAPER-COVERED WHEEL) |
| ISO 3650:1998 | Geometrical Product Specifications (GPS) — Length standards — Gauge blocks |
| EN 13605:2013 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
| BIS IS 1501-3 : 2013 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| 15/30332554 DC : 0 | BS EN 14399-9 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| 15/30291323 DC : 0 | BS EN ISO 1797 - DENTISTRY - SHANKS FOR ROTARY, OSCILLATING AND RECIPROCATING INSTRUMENTS |
| BS ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Strength and quality of materials |
| BS EN ISO 17937:2015 | Dentistry. Osteotome |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| 17/30335249 DC : 0 | BS EN ISO 898-3 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 3: FLAT WASHERS WITH SPECIFIED PROPERTY CLASSES |
| BS ISO 6932:2014 | Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
| BS ISO 5182 : 2008 | RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT |
| BS EN ISO 1797:2017 | Dentistry. Shanks for rotary and oscillating instruments |
| EN 13601:2013 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| BS A 363:2000 | Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification |
| 03/118501 DC : DRAFT NOV 2003 | ISO/DIS 17804 - FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS - CLASSIFICATION |
| BS 2A 295:2000 | Nuts, self-locking, with maximum operating temperature less than or equal to 425°C. Test methods |
| ISO 9154:2016 | Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Procurement specification |
| ISO/TR 10108:1989 | Steel — Conversion of hardness values to tensile strength values |
| DIN EN ISO 12690:2011-04 | Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
| ISO 4498-2:1981 | Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen |
| I.S. EN ISO 19715:2017 | DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
| PREN 4700-007 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| API SPEC 19AC : 2016 | SPECIFICATION FOR COMPLETION ACCESSORIES |
| PREN 4700-001 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| PREN 4700-002 : 200P3 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| I.S. EN ISO 12679:2015 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| ISO 6507-2:2018 | Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines |
| I.S. EN ISO 1133-1:2011 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD (ISO 1133-1:2011) |
| API 16AR : 2017 | STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT |
| I.S. EN 16451:2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| I.S. EN ISO 6507-2:2018 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2018) |
| I.S. EN ISO 22068:2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012) |
| I.S. EN 15594:2009 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
| 16/30258490 DC : 0 | BS EN 14587-1 - RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF RAILS - PART 1: NEW R220, R260, R260MN, R320CR, R350HT, R370LHT AND R400HT GRADE RAILS IN A FIXED PLANT |
| I.S. EN ISO 15156-3:2015&LC:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
| EN ISO 7492:2018 | Dentistry - Dental explorer (ISO 7492:2018) |
| I.S. EN 4700-004:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| ISO 22034-1:2007 | Steel wire and wire products — Part 1: General test methods |
| ISO 9352:2012 | Plastics — Determination of resistance to wear by abrasive wheels |
| ISO 7481:2000 | Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C — Test methods |
| I.S. EN ISO 9015-2:2016 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 2: MICROHARDNESS TESTING OF WELDED JOINTS (ISO 9015-2:2016) |
| BS EN 14399-9:2009 | High strength structural bolting for preloading System HR or HV. Direct tension indicators for bolt and nut assemblies |
| 17/30359541 DC : 0 | BS EN 12797 - BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
| BS EN ISO 14918:1998 | Thermal spraying. Approval testing of thermal sprayers |
| 17/30346732 DC : 0 | BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| I.S. EN ISO 11961:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| EN ISO 14457:2017 | Dentistry - Handpieces and motors (ISO 14457:2017) |
| ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
| ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels |
| EN ISO 14918:1998 | Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998) |
| EN ISO 9873:2017 | Dentistry - Intra-oral mirrors (ISO 9873:2017) |
| I.S. EN 10088-4:2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| I.S. EN ISO 6507-4:2006 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 4: TABLES OF HARDNESS VALUES (ISO 6507-4:2018) |
| ISO 683-10:1987 | Heat-treatable steels, alloy steels and free-cutting steels — Part 10: Wrought nitriding steels |
| ISO 4960:2007 | Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % |
| ISO 8535-2:2003 | Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 2: Requirements for composite tubes |
| ISO 14457:2017 | Dentistry — Handpieces and motors |
| I.S. EN 14587-2:2009 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 2: NEW R220, R260, R260MN AND R350HT GRADE RAILS BY MOBILE WELDING MACHINES AT SITES OTHER THAN A FIXED PLANT |
| I.S. EN 14399-9:2009 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs |
| ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress |
| DIN EN 13601:2013-09 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| DIN EN ISO 10510:2011-07 | Tapping screw and washer assemblies with plain washers (ISO 10510:2011) |
| DIN EN 772-1:2016-05 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
| DIN EN ISO 10451:2010-11 | Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
| DIN EN 14399-1:2015-04 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 10666:2000-02 | Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999); German version EN ISO 10666:1999 |
| DIN EN 13600:2013-09 | Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2013 |
| ISO 17509:2016 | Dentistry — Torque transmitter for handpieces |
| ISO 10669:1999 | Plain washers for tapping screw and washer assemblies — Normal and large series — Product grade A |
| BS EN ISO 6508-2:2015 | Metallic materials. Rockwell hardness test Verification and calibration of testing machines and indenters |
| ISO 1522:2006 | Paints and varnishes — Pendulum damping test |
| BS EN ISO 15732:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
| BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| BS EN 10003-2:1995 | Metallic materials. Brinell hardness test Verification of Brinell hardness testing machines |
| BS EN 14870-2:2004 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Fittings |
| BS EN ISO 6507-3:2005 | Metallic materials. Vickers hardness test Calibration of reference blocks |
| BS EN 14798:2005 | Glass packaging. Hand-held crown bottle openers. Dimensions |
| BS EN ISO 1797-1:2011 | Dentistry. Shanks for rotary instruments Shanks made of metals |
| ISO 10510:2011 | Tapping screw and washer assemblies with plain washers |
| ISO 8751:2007 | Spring-type straight pins — Coiled, light duty |
| BS EN 843-4:2005 | Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Vickers, Knoop and Rockwell superficial hardness |
| BS EN 13892-2:2002 | Methods of test for screed materials Determination of flexural and compressive strength |
| BS EN 10225:2009 | Weldable structural steels for fixed offshore structures. Technical delivery conditions |
| BS EN 1043-1:1996 | Destructive tests on welds in metallic materials. Hardness testing. Hardness test on arc welded joints |
| ISO 10666:1999 | Drilling screws with tapping screw thread — Mechanical and functional properties |
| BS EN ISO 10510:2011 | Tapping screw and washer assemblies with plain washers |
| ISO 15732:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
| BS EN ISO 13533:2002 | Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
| BS EN ISO 18265:2013 | Metallic materials. Conversion of hardness values |
| 01/715268 DC : DRAFT NOV 2001 | BS ISO 13628-7 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
| BS EN 1653:1998 | Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
| 12/30236742 DC : 0 | BS ISO/IEC 80079-36 - EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - BASIC METHODS AND REQUIREMENTS |
| BS EN ISO 16744:2003 | Dentistry. Base metal materials for fixed dental restorations |
| BS EN ISO 13625:2002 | Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings |
| BS EN 10151:2002 | Stainless steel strip for springs. Technical delivery conditions |
| BS EN ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread |
| DIN EN ISO 8748:2007-07 | Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007) |
| EN 13148:2010 | Copper and copper alloys - Hot-dip tinned strip |
| EN ISO 9015-2:2016 | Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2016) |
| EN 10328:2005 | Iron and steel - Determination of the conventional depth of hardening after surface heating |
| DIN EN ISO 9873:2000-07 | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
| DIN EN ISO 1562:2004-08 | DENTISTRY - CASTING GOLD ALLOYS |
| EN 12450:2012 | Copper and copper alloys - Seamless, round copper capillary tubes |
| EN 12811-3:2002 | Temporary works equipment - Part 3: Load testing |
| EN 1172:2011 | Copper and copper alloys - Sheet and strip for building purposes |
| EN 50109-2-5:1995 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications |
| DIN EN ISO 2702:2011-08 | Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011) |
| EN 12452:2012 | Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
| EN 1301-1:2008 | Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery |
| EN 10151:2002 | Stainless steel strip for springs - Technical delivery conditions |
| BS 4425:1988 | Specification for dental casting gold alloys |
| EN 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| DIN EN 14436:2004-11 | Copper and copper alloys - Electrolytically tinned strip |
| EN 50340:2010 | Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV |
| DIN EN ISO 8751:2007-07 | Spring-type straight pins - Coiled, light duty (ISO 8751:2007) |
| EN ISO 12690:2010 | Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
| DIN EN ISO 898-6:1996-02 | MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| DIN EN 843-4:2005-08 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness |
| DIN EN ISO 3126:2005-05 | Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005) |
| DIN EN ISO 4516:2002-10 | Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002) |
| I.S. EN ISO 13533:2002 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
| DIN EN 14730-1:2010-12 | RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
| DIN EN ISO 898-2:2012-08 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
| DIN EN ISO 13337:2009-10 | SPRING-TYPE STRAIGHT PINS, SLOTTED, LIGHT DUTY |
| UNE-EN ISO 9015-1:2011 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
| I.S. EN 14870-2:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 2: FITTINGS |
| I.S. EN 14163:2002 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - WELDING OF PIPELINES |
| UNE-EN ISO 898-2:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
| UNE-EN 15594:2010 | Railway applications - Track - Restoration of rails by electric arc welding |
| I.S. EN 14870-3:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 3: FLANGES |
| UNE-EN ISO 21672-1:2012 | Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012) |
| UNE-EN ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016) |
| UNE-EN ISO 14457:2013 | Dentistry - Handpieces and motors (ISO 14457:2012) |
| UNE-EN ISO 12690:2011 | Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
| UNE-EN ISO 898-1:2015 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| UNE-EN ISO 19490:2018 | Dentistry - Sinus membrane elevator (ISO 19490:2017) |
| UNE-EN ISO 3506-4:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| UNE-EN ISO 1797-1:2012 | Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals (ISO 1797-1:2011) |
| UNE-EN ISO 3506-3:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| UNE-EN ISO 10510:2011 | Tapping screw and washer assemblies with plain washers (ISO 10510:2011) |
| UNE-EN 12451:2013 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| UNE-EN ISO 17509:2017 | Dentistry - Torque transmitter for handpieces (ISO 17509:2016) |
| UNE-EN 14399-1:2016 | High-strength structural bolting assemblies for preloading - Part 1: General requirements |
| UNE-EN 12452:2013 | Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
| UNE-EN 12450:2013 | Copper and copper alloys - Seamless, round copper capillary tubes |
| UNE-EN 14587-2:2010 | Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
| UNE-EN 14587-3:2013 | Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
| UNE-EN ISO 2702:2011 | Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011) |
| UNE-EN 485-1:2017 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| UNE-EN ISO 18556:2016 | Dentistry - Intraoral spatulas (ISO 18556:2016) |
| UNE-EN ISO 3506-2:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| UNE-EN ISO 16635-1:2014 | Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-1:2013) |
| UNE-EN 12735-2:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
| UNE-EN 10088-4:2010 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| UNE-EN ISO 9015-2:2016 | Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2016) |
| UNE-EN 13348:2016 | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
| UNE-ISO 23848-1:2013 | Machine tools -- Ball splines -- Part 1: General characteristics and requirements |
| UNE-EN 13601:2014 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| UNE-EN 10088-2:2015 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| UNE-EN 13148:2012 | Copper and copper alloys - Hot-dip tinned strip |
| UNE-EN 13600:2014 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
| UNE-EN ISO 16635-2:2015 | Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps(ISO 16635-2:2014) |
| UNE-EN 10225:2010 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| UNE-EN ISO 14271:2018 | Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017) |
| I.S. EN ISO 15087-1:2002 | DENTAL ELEVATORS - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 14730-1:2018 | Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
| UNE-EN ISO 14917:2017 | Thermal spraying - Terminology, classification (ISO 14917:2017) |
| UNE-EN ISO 18265:2014 | Metallic materials - Conversion of hardness values (ISO 18265:2013) |
| UNE-EN 772-1:2011 | Methods of test for masonry units - Part 1: Determination of compressive strength |
| UNE-EN ISO 9873:2017 | Dentistry - Intra-oral mirrors (ISO 9873:2017) |
| UNE-EN ISO 1522:2007 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
| UNE-EN ISO 16859-2:2016 | Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015) |
| UNE-EN ISO 5470-1:2017 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
| UNE-EN 13463-1:2011 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| UNE-EN ISO 5182:2017 | Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016) |
| UNE-EN ISO 12670:2016 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) |
| UNE-EN 12735-1:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
| UNE-EN ISO 6508-2:2015 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
| UNE-EN 16273:2015 | Railway applications - Track - Forged rail transitions |
| UNE-EN ISO 22068:2014 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| UNE-EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| UNE-EN 50340:2011 | Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV |
| UNE-EN ISO 1133-1:2012 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
| UNE-EN 12513:2011 | Founding - Abrasion resistant cast irons |
| UNE-EN ISO 12156-1:2016 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
| UNE-EN ISO 8752:2010 | Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009) |
| UNE-EN ISO 10673:2010 | Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A (ISO 10673:2009) |
| UNE-EN ISO 1797-3:2013 | Dentistry - Shanks for rotary instruments - Part 3: Shanks made of ceramics (ISO 1797-3:2013) |
| UNE-EN ISO 12679:2016 | Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
| UNE-EN ISO 17937:2016 | Dentistry - Osteotome (ISO 17937:2015) |
| UNE-EN ISO 7153-1:2017 | Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016) |
| UNE-EN ISO 13337:2010 | Spring-type straight pins. Slotted, light duty (ISO 13337:2009) |
| UNE-EN ISO 898-5:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| UNE-EN ISO 6506-2:2015 | Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014) |
| ASME B89.1.9 : 2002 : R2007 | GAGE BLOCKS |
| ASME B89.1.9 : 2002 : INC : ERR 1 : 2003 : R2007 | GAGE BLOCKS |
| ASME B89.1.9 : 2002 : INC : ERR 1 : 2002 | GAGE BLOCKS |
| I.S. EN ISO 642:2000 | STEEL - HARDENABILITY TEST BY END QUENCHING (JOMINY TEST) |
| ASME B89.1.9 : 2002 : INC : ERR 1 : 2003-12 : R2012 | GAGE BLOCKS |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.