ISO 6507-3:2005
Withdrawn
Withdrawn
View Superseded by
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
12-08-2005
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO 6507-3:2005 specifies a method for the calibration of reference blocks to be used for the indirect verification of Vickers hardness testing machines, as specified in ISO 6507-2.
The method is applicable only for indentations with diagonals greater than or equal to 0,020 mm.
| Committee |
ISO/TC 164/SC 3
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| IS 1501 : Part 3 : 2013(R2018) | Identical |
| BS EN ISO 6507-3:2005 | Equivalent |
| NEN EN ISO 6507-3 : 2018 | Identical |
| BS EN ISO 6507-3:2005 | Identical |
| UNE 7423-3:1992 | Identical |
| DIN EN ISO 6507-3:2016-08 (Draft) | Identical |
| UNE-EN ISO 6507-3:2007 | Identical |
| PN EN ISO 6507-3 : 2007 | Identical |
| EN ISO 6507-3:2018 | Identical |
| I.S. EN ISO 6507-3:2018 | Identical |
| NF EN ISO 6507-3 : 2018 | Identical |
| NS EN ISO 6507-3 : 2018 | Identical |
| NS 10111 : 1986 | Similar to |
| UNE-EN ISO 6507-3:2005 | Identical |
| NBN EN ISO 6507-3 : 2006 | Identical |
| BS ISO 14627:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method |
| DIN ISO 22826:2008-08 | Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005) |
| 13/30263803 DC : 0 | BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING |
| GOST 8-335 : 2004 | STATE SYSTEM FOR ENSURING THE UNIFORMITY OF MEASUREMENTS - HARDNESS STANDARD BLOCKS - METHODS OF VERIFICATION |
| BS 7814:1995 | Specification for bolts and screws incorporating either underhead locking or anti-rotation features |
| CEI UNI EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS |
| 17/30315891 DC : 0 | BS ISO 19690-2 - DISC SPRINGS - PART 2: TECHNICAL SPECIFICATIONS |
| 12/30248590 DC : 0 | BS ISO 14577-3 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| I.S. EN 16602-70-46:2014 | SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS |
| SAE J2275_201805 | Internal Combustion Engines - Piston Ring-Grooves |
| BS EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| ISO 6621-2:2003 | Internal combustion engines — Piston rings — Part 2: Inspection measuring principles |
| ISO 22826:2005 | Destructive tests on welds in metallic materials — Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
| DIN EN ISO 14577-3:2015-11 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 14577-3:2015) |
| HD 620 : 2010 | DISTRIBUTION CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES FROM 3,6/6 (7,2) KV UP TO AND INCLUDING 20,8/36 (42) KV |
| EN 50109-2-3:1995 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors |
| DIN EN ISO 6507-1:2006-03 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
| DIN EN 15551:2011-01 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| ISO 14627:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method |
| I.S. EN 50109-2-3:1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-3: PARTICULAR REQUIREMENTS FOR CONTACTS OF ELECTRICAL CONNECTORS |
| 16/30290358 DC : 0 | BS EN ISO 6507-2 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| 16/30348401 DC : 0 | BS EN ISO 14271 - RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS |
| BS EN 16602-70-46:2014 | Space product assurance. Requirements for manufacturing and procurement of threaded fasteners |
| 04/30098250 DC : DRAFT MAY 2004 | EN ISO 6507-2 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| 09/30201953 DC : 0 | BS EN ISO 14271 - RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS |
| BS ISO 14705:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for hardness of monolithic ceramics at room temperature |
| I.S. EN 45545-2:2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| ISO 14271:2017 | Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds |
| ISO 6621-4:2015 | Internal combustion engines — Piston rings — Part 4: General specifications |
| S.R. CEN/TS 45545-2:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| EN ISO 6507-2:2018 | Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2018) |
| BS EN 1758:1998 | Copper and copper alloys. Strip for lead frames |
| EN 45545-2:2013+A1:2015 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
| I.S. EN ISO 6507-1:2018 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD (ISO 6507-1:2018) |
| I.S. EN ISO 14577-3:2015 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 14577-3:2015) |
| VDI/VDE 2616 Blatt 1:2012-08 | Hardness testing of metallic materials |
| 15/30282343 DC : 0 | BS ISO 18746 - TRADITIONAL CHINESE MEDICINE - INTRADERMAL ACUPUNCTURE NEEDLES |
| BS ISO 6621-2:2003 | Internal combustion engines. Piston rings Inspection measuring principles |
| BS ISO 17218:2014 | Sterile acupuncture needles for single use |
| 10/30216687 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| 07/30144593 DC : 0 | BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION |
| 07/30162661 DC : 0 | BS ISO 14705 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR HARDNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE |
| ISO 6507-1:2018 | Metallic materials — Vickers hardness test — Part 1: Test method |
| 16/30328578 DC : 0 | BS ISO 14705 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR HARDNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE |
| BS EN ISO 14271:2017 | Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds |
| BS EN 15551:2017 | Railway applications. Railway rolling stock. Buffers |
| ISO 14705:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature |
| DIN EN ISO 6507-2:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2005) |
| EN ISO 6507-1:2018 | Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2018) |
| BS EN ISO 14923:2003 | Thermal spraying. Characterization and testing of thermally sprayed coatings |
| EN ISO 14923:2003 | Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) |
| BIS IS 1501-2 : 2013 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| ISO 18746:2016 | Traditional Chinese medicine — Sterile intradermal acupuncture needles for single use |
| 12/30242220 DC : 0 | BS ISO 6621-4 - INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 4: GENERAL SPECIFICATIONS |
| I.S. EN 843-4:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS |
| 13/30259011 DC : 0 | BS ISO 17218 - STERILE ACUPUNCTURE NEEDLES FOR SINGLE USE |
| 11/30217705 DC : 0 | BS ISO 14627 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE RESISTANCE OF SILICON NITRIDE MATERIALS FOR ROLLING BEARING BALLS AT ROOM TEMPERATURE BY INDENTATION FRACTURE METHOD |
| 16/30290355 DC : 0 | BS EN ISO 6507-1 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
| 03/106174 DC : DRAFT APR 2003 | ISO 22826 - DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING OF NARROW WELDED JOINTS BY LASER AND ELECTRON BEAM (VICKERS AND KNOOP HARDNESS TESTS) |
| BS ISO 22826:2005 | Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
| BIS IS/ISO 6621-2 : 2003(R2014) | INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 2: INSPECTION MEASURING PRINCIPLES |
| DIN EN 45545-2:2016-02 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| 08/30141132 DC : DRAFT APR 2008 | BS EN ISO 10423 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| DD CEN/TS 45545-2:2009 | Railway applications. Fire protection on railway vehicles Requirements for fire behaviour of materials and components |
| I.S. EN 15551:2017 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| I.S. EN ISO 14271:2017 | RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS (ISO 14271:2017) |
| ISO 17218:2014 | Sterile acupuncture needles for single use |
| EN ISO 14271:2017 | Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017) |
| I.S. HD 620:2010 | DISTRIBUTION CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES FROM 3,6/6 (7,2) KV UP TO AND INCLUDING 20,8/36 (42) KV |
| I.S. EN 50109-2-5:1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-5: PARTICULAR REQUIREMENTS FOR THE TERMINATION OF TWIN-AX CABLE FOR DATABUS APPLICATIONS |
| DIN EN ISO 6507-1:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
| BS EN ISO 4516:2002 | Metallic and other inorganic coatings. Vickers and Knoop microhardness tests |
| ISO 14923:2003 | Thermal spraying — Characterization and testing of thermally sprayed coatings |
| ISO 4516:2002 | Metallic and other inorganic coatings — Vickers and Knoop microhardness tests |
| ISO 14577-3:2015 | Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks |
| BS EN ISO 14577-3:2015 | Metallic materials. Instrumented indentation test for hardness and materials parameters Calibration of reference blocks |
| BS EN 1654:1998 | Copper and copper alloys. Strip for springs and connectors |
| EN 1758:1997 | Copper and copper alloys - Strip for lead frames |
| EN ISO 4516:2002 | Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002) |
| EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| EN 16602-70-46:2014 | Space product assurance - Requirements for manufacturing and procurement of threaded fasteners |
| EN 843-4:2005 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness |
| EN ISO 14577-3:2015 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015) |
| DIN EN 15551:2013-05 (Draft) | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| 18/30346200 DC : DRAFT APR 2018 | BS ISO 21618 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE RESISTANCE OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY INDENTATION FRACTURE (IF) METHOD |
| 04/30098246 DC : DRAFT MAY 2004 | ISO 6507-1 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
| BS ISO 6621-4:2015 | Internal combustion engines. Piston rings General specifications |
| 13/30271610 DC : 0 | BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS |
| BS 3900-E14(1997) : 1997 AMD 16870 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE-PAPER-COVERED WHEEL) |
| ISO 6507-2:2018 | Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines |
| I.S. EN ISO 6507-2:2018 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2018) |
| BS EN 843-4:2005 | Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Vickers, Knoop and Rockwell superficial hardness |
| CEN/TS 45545-2:2009 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
| EN 50109-2-5:1995 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications |
| DIN EN 843-4:2005-08 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness |
| DIN EN ISO 4516:2002-10 | Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002) |
| UNE-EN 45545-2:2013 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components |
| UNE-EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| UNE-EN ISO 14577-3:2016 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015) |
| UNE-EN ISO 14271:2018 | Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017) |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.