• There are no items in your cart

ISO 6508-1:2016

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Metallic materials — Rockwell hardness test — Part 1: Test method

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

12-13-2023

Language(s)

French, English

Published date

08-08-2016

ISO 6508-1:2016 specifies the method for Rockwell regular and Rockwell superficial hardness tests for scales A, B, C, D, E, F, G, H, K, 15N, 30N, 45N, 15T, 30T, and 45T for metallic materials and is applicable to stationary and portable hardness testing machines.

For specific materials and/or products, other specific International Standards apply (for instance, ISO 3738‑1 and ISO 4498).

Committee
ISO/TC 164/SC 3
DevelopmentNote
Supersedes ISO 6508 and ISO 1024 (04/2001) Supersedes ISO/DIS 6508-1. (08/2016)
DocumentType
Standard
Pages
33
PublisherName
International Organization for Standardization
Status
Superseded
SupersededBy
Supersedes
UnderRevision

I.S. EN ISO 15630-3:2010 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
DIN EN ISO 15156-3:2015-12 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015)
BS EN 4700-001:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip
17/30352150 DC : 0 BS ISO 6787 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - ADJUSTABLE WRENCHES
07/30172770 DC : 0 BS ISO 10428 - PETROLEUM AND NATURAL GAS INDUSTRIES DOWNHOLE EQUIPMENT - DOWNHOLE EQUIPMENT - SUCKER RODS, COUPLINGS AND ANCILLARY EQUIPMENT
UNE-EN ISO 12670:2016 Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011)
10/30196141 DC : 0 BS ISO 11119-3 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 3: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES WITH NON-METALLIC AND NON-LOAD SHARING METAL LINERS
ISO 5743:2004 Pliers and nippers General technical requirements
BS ISO 9656:2004 Pliers and nippers for electronics. Test methods
02/704957 DC : DRAFT NOV 2002 ISO 683-14 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 14: HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS
12/30257301 DC : 0 BS EN ISO 20957-1 - STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
ISO 11749:2014 Belt drive — V-ribbed belts for the automotive industry — Fatigue test
11/30196123 DC : DRAFT MAY 2011 BS ISO 11119-2 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 2: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS WITH LOAD-SHARING METAL LINERS
BS ISO 289-1:2015 Rubber, unvulcanized. Determinations using a shearing-disc viscometer Determination of Mooney viscosity
ISO 404:2013 Steel and steel products — General technical delivery requirements
14/30261090 DC : 0 BS EN ISO 17937 - DENTISTRY - OSTEOTOME FOR BONE COMPACTION AND SINUS FLOOR ELEVATION
ISO 11949:2016 Cold-reduced tinmill products Electrolytic tinplate
UNE-EN ISO 5182:2017 Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016)
17/30357660 DC : DRAFT AUG 2017 BS ISO 4960 - STEEL STRIP, COLD-REDUCED WITH A MASS FRACTION OF CARBON OVER 0,25%
API 11D3 :2008 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS
06/30148182 DC : DRAFT MAY 2006 ISO 7866 - GAS CYLINDERS REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING
UNI EN ISO 12690 : 2011 METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES
13/30290101 DC : 0 BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
17/30312468 DC : 0 BS ISO 15461 - STEEL FORGINGS - TESTING FREQUENCY, SAMPLING CONDITIONS AND TEST METHODS FOR MECHANICAL TESTS
17/30337413 DC : 0 BS EN ISO 4957 - TOOL STEELS
I.S. EN ISO 898-2:2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012)
BS ISO 9448-10:2013 Tools for pressing. Guide bushes Form E, gliding bushes, flanged, type 2
BS EN ISO 14998:2013 Petroleum and natural gas industries. Downhole equipment. Completion accessories
API 5DP CHINESE : 2009 SPECIFICATION FOR DRILL PIPE
BS ISO 7689:2008 Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa. Procurement specification
17/30303088 DC : 0 BS EN ISO 7492 - DENTISTRY - DENTAL EXPLORER
16/30327501 DC : 0 BS ISO 1711-2 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - TECHNICAL SPECIFICATIONS - PART 2: MACHINE-OPERATED SOCKETS (IMPACT)
API SPEC 11B CHINESE : 2010 SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES
07/30144587 DC : 0 BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25%
UNI EN 4700-006 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
BS EN ISO 18556:2016 Dentistry. Intraoral spatulas
13/30247437 DC : 0 BS EN ISO 683-17 - HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013)
BS ISO 9448-2:2013 Tools for pressing. Guide bushes Form A, gliding bushes, plain, type 1
15/30323936 DC : 0 BS EN 3833 - AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION
13/30255310 DC : 0 BS EN 1426 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
17/30315891 DC : 0 BS ISO 19690-2 - DISC SPRINGS - PART 2: TECHNICAL SPECIFICATIONS
16/30297742 DC : DRAFT JUNE 2016 BS EN ISO 19490 - DENTISTRY - SINUS MEMBRANE ELEVATOR
10/30197302 DC : 0 BS ISO 22068 - SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS
DIN 6773:2001-04 HEAT TREATMENT OF FERROUS METALS - HEAT TREATED PARTS, PRESENTATION AND INDICATIONS ON DRAWINGS
04/30074927 DC : DRAFT JUN 2004 EN ISO 6508-2 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T)
DIN EN ISO 26443 E : 2016 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC COATINGS (ISO 26443:2008)
UNE-EN ISO 19490:2018 Dentistry - Sinus membrane elevator (ISO 19490:2017)
13/30264474 DC : 0 BS ISO 17541 - PLASTICS - QUANTITATIVE EVALUATION OF SCRATCH-INDUCED DAMAGE AND SCRATCH VISIBILITY
17/30323197 DC : 0 BS EN ISO 20570 - DENTISTRY - ORAL SURGICAL SCALPEL HANDLE
BS ISO 26443 : 2008 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC COATINGS
EN 1627:2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification
12/30258463 DC : 0 BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
BS EN ISO 12670:2015 Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions
BS ISO 9182-4:2013 Tools for pressing. Guide pillars Type C, pillars with taper lead and bush
BS EN 4700-005:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock
ISO 5287:2003 Belt drives Narrow V-belts for the automotive industry Fatigue test
BS EN ISO 9809-2:2010 Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa
15/30314608 DC : 0 BS EN ISO 7153-1 - SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS
16/30302541 DC : 0 BS EN ISO 19715 - DENTISTRY - FILLING INSTRUMENTS WITH CONTRA SET
BS ISO 4254-13:2012 Agricultural machinery. Safety Large rotary mowers
15/30297745 DC : 0 BS EN ISO 9173-1 - DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS
12/30258615 DC : 0 BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION
BS ISO 20957-1:2005 Stationary training equipment General safety requirements and test methods
14/30275471 DC : 0 BS ISO 18137-1 - LEAF SPRINGS - PART 1: TECHNICAL REQUIREMENTS AND TEST METHODS
17/30361645 DC : DRAFT SEP 2017 BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
BS ISO 11119-4:2016 Gas cylinders. Refillable composite gas cylinders. Design, construction and testing Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners
BS EN ISO 7866:2012 Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing
ISO 16468:2015 Investment castings (steel, nickel alloys and cobalt alloys) General technical requirements
06/30148179 DC : DRAFT SEP 2006 ISO 9809-3 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
12/30251283 DC : 0 BS ISO 9809-4 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: STAINLESS STEEL CYLINDERS WITH AN R[M] VALUE OF LESS THAN 1100 MPA
BS EN ISO 3266 : 2010 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015)
06/30159843 DC : 0 BS ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION - RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
05/30128668 DC : DRAFT FEB 2005 ISO 7689 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT
API 11D3 : 2008 : R2015 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS
PREN 2576 : 200P2 AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION
BS ISO 13628-10 : 2005 AMD 16775 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE
06/30148176 DC : DRAFT SEP 2006 ISO 9809-2 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
ABMA 10A : 2001 : R2008 METAL BALLS FOR UNGROUND BEARINGS AND OTHER USES
08/30190263 DC : DRAFT SEP 2008 BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
PREN 3302 : 200P2 AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PM1708 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - TECHNICAL SPECIFICATION
I.S. EN ISO 17945:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015)
BIS IS 1586-3 : 2012 METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (SCALES, A, B, C, D, E, F, G, H, K, N, T)
PREN 4359 : 200P1 AEROSPACE SERIES - SIX LOBE RECESS - DRIVERS - TECHNICAL SPECIFICATION
I.S. EN 16281:2013 CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
ISO 683-1:2016 Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
ISO 9448-9:2013 Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2
ISO 10303-214:2010 Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes
ISO 12753-2:1999 Compasses Part 2: Requirements, designation and marking
I.S. EN ISO 9809-2:2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
ISO 9873:2017 Dentistry Intra-oral mirrors
ISO 11951:2016 Cold-reduced tinmill products Blackplate
I.S. EN ISO 17078-4:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT
I.S. EN ISO 18556:2016 DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016)
ONORM EN 3685 : 2008 AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA/650 DEGREES C - TECHNICAL SPECIFICATION
ISO 22034-1:2007 Steel wire and wire products — Part 1: General test methods
UNE-EN ISO 16635-2:2015 Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps(ISO 16635-2:2014)
17/30359541 DC : 0 BS EN 12797 - BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS
ISO 8642:2008 Aerospace — Self-locking nuts with maximum operating temperature greater than 425 degrees C — Test methods
BS 2000-49(2007) : 2007 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
UNI EN 14399-9 : 2009 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
I.S. EN 4700-007:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
NF EN ISO 15630-3 : 2010 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEELS
NF EN 3389 : 2009 AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION
NF EN ISO 3266 : 2010 AMD 1 2016 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES
UNI EN ISO 11960 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
ISO 5857:2008 Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 250 MPa Procurement specification
NF EN 3299 : A2007 AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION
API 14L CHINESE : 2007 SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
ONORM EN 12504-2 : 2013 TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER
DIN EN ISO 15156-2:2015-12 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015)
DIN EN ISO 6508-2:2015-06 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015
DIN EN 10208-1:2009-07 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
DIN EN ISO 6508-3:2015-06 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015)
BS EN ISO 14310:2008 Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs
BS EN ISO 13628-2:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications
UNE-EN ISO 898-1:2015 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
BS EN 3302:2017 Aerospace series. Bolts in heat resisting steel FE-PM1708 (FV535). Classification: 1 000 MPa/550 °C. Technical specification
BS EN 12504-2:2012 Testing concrete in structures Non-destructive testing. Determination of rebound number
UNE-EN 12504-2:2013 Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number
BS EN 10089:2002 Hot rolled steels for quenched and tempered springs. Technical delivery conditions
BS EN ISO 7153-1:2016 Surgical instruments. Materials Metals
BS EN ISO 11960:2014 Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
BS EN 10205:2016 Cold reduced tinmill products. Blackplate
UNE-EN 12513:2011 Founding - Abrasion resistant cast irons
BS EN ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress
ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts
BS EN 14616:2004 Thermal spraying. Recommendations for thermal spraying
BS EN 893:2010 Mountaineering equipment. Crampons. Safety requirements and test methods
BS EN 14566 : 2008 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 14772:2005 Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
I.S. EN 10084:2008 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10218-1:2012 STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS
EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 10263-1:2017 Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
CEN/TS 1071-8 : 2004 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 8: ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION
EN 12080:2017 Railway applications - Axleboxes - Rolling bearings
EN 892:2012+A1:2016 Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
EN ISO 6508-2:2015 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015)
DIN EN 10218-1:2012-03 STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS
EN 10088-4:2009 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
DIN EN 14616:2005-02 THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING
DIN ISO 10071-2:2006-03 TOOLS FOR PRESSING - BALL-LOCK PUNCHES - PART 2: BALL-LOCK PUNCHES FOR HEAVY DUTY
EN 10208-1:2009 Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A
DIN EN 657:2005-06 THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION
DIN ISO 12844:2006-11 Raw optical glass - Grindability with diamond pellets - Test method and classification (ISO 12844:1999)
DIN ISO 4498:2005-11 SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS
DIN EN 10205:2017-03 COLD REDUCED TINMILL PRODUCTS - BLACKPLATE
EN 62271-202:2014/AC:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014)
EN 10205:2016 Cold reduced tinmill products - Blackplate
EN 10218-1:2012 Steel wire and wire products - General - Part 1: Test methods
EN 12513:2011 Founding - Abrasion resistant cast irons
EN ISO 6508-3:2015 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015)
EN ISO 26443:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings (ISO 26443:2008)
EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
ONORM EN ISO 898-2 : 2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012)
ISO 11950:2016 Cold-reduced tinmill products Electrolytic chromium/chromium oxide-coated steel
UNI EN ISO 16635-2 : 2014 DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS
BS EN ISO 16635-2:2014 Dentistry. Dental rubber dam instruments Clamp forceps
05/30136295 DC : DRAFT JUL 2005 ISO 4875-2 - METAL-CUTTING BAND SAW BLADES - PART 2: CHARACTERISTICS AND DIMENSIONS
UNI CEN/TS 16700 : 2014 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF RESISTANCE TO IMPACT OF A COATING ON A WOODEN SUBSTRATE
S.R. CEN/TS 16700:2014 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF RESISTANCE TO IMPACT OF A COATING ON A WOODEN SUBSTRATE
BS EN 1627:2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Requirements and classification
12/30245297 DC : 0 BS EN ISO 16635-2 - DENTISTRY - RUBBER DAM TECHNIQUE - PART 2: RUBBER DAM CLAMP FORCEPS
DIN EN ISO 16635-1 E : 2014 DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013)
API SPEC 11D1 : 2015 PACKERS AND BRIDGE PLUGS
ISO 898-3:2018 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes
BS EN ISO 9809-1:2010 Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength less than 1100 MPa
DIN EN ISO 18556 E : 2016 DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016)
11/30230618 DC : 0 BS ISO 683-2 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 2: ALLOY STEELS FOR QUENCHING AND TEMPERING
BS EN 4700-006:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings
BS ISO 9448-4:2013 Tools for pressing. Guide bushes Form C, gliding bushes, headed, type 1
I.S. EN ISO 9809-1:2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
ISO 17918:2015 Corrosion of metals and alloys Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
I.S. EN 657:2005 THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION
DIN EN ISO 22068 E : 2014 SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012)
I.S. EN 10208-2:2009 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
DIN EN ISO 3266:2016-05 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015)
UNI EN ISO 9809-3 : 2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
13/30274822 DC : 0 BS ISO 11119-4 - GAS CYLINDERS - REFILLABLE COMPOSITE GAS CYLINDERS AND TUBES - DESIGN, CONSTRUCTION AND TESTING - PART 4: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES UP TO 450 L WITH LOAD-SHARING WELDED METALLIC LINERS
15/30303331 DC : 0 BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD
14/30248087 DC : 0 BS ISO 11950 - COLD-REDUCED ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL
15/30278527 DC : 0 BS EN ISO 18559 - DENTISTRY - EXTRAORAL SPATULAS FOR MIXING DENTAL CEMENTS
API 64 : 2017-08 DIVERTER EQUIPMENT SYSTEMS
BS EN ISO 20957-1:2013 Stationary training equipment General safety requirements and test methods
DIN EN 16451:2015-09 RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
13/30260404 DC : 0 BS ISO 1711-2 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - TECHNICAL SPECIFICATIONS - PART 2: MACHINE-OPERATED SOCKETS (IMPACT)
I.S. EN 15311:2007 THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS
ONORM EN ISO 15630-3 : 2011 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
I.S. EN ISO 14917:2017 THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017)
BS EN ISO 19490:2017 Dentistry. Sinus membrane elevator
11/30238890 DC : 0 BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES
BS ISO 22068 : 2012 SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS
DIN EN ISO 9873:2016-03 (Draft) DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017)
BS ISO 10071-2:2005 Tools for pressing. Ball-lock punches Ball-lock punches for heavy duty
BS EN ISO 19715:2017 Dentistry. Filling instrument with contra angle
BS ISO 4498:2005 Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness
I.S. EN ISO 9809-3:2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
08/30168345 DC : DRAFT JULY 2008 BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
ISO 683-14:2004 Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs
10/30216835 DC : 2010 BS ISO 7331 - SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS
15/30248084 DC : 0 BS ISO 11949 - COLD-REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE
07/30107797 DC : 0 BS EN 14399-9 - HIGH STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - BOLT AND NUT ASSEMBLIES WITH DIRECT TENSION INDICATORS
NF EN ISO 9809-1 : 2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
EN 4700-002:2016 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section
UNI EN ISO 9809-1 : 2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
BS ISO 10071-1:2008 Tools for pressing. Ball-lock punches Ball-lock punches for light duty
BS ISO 16635-1 : 2013 DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH
BS EN 16602-70-46:2014 Space product assurance. Requirements for manufacturing and procurement of threaded fasteners
BS EN ISO 14917:2017 Thermal spraying. Terminology, classification
BS ISO 9182-5:2013 Tools for pressing. Guide pillars Type D, end-locking pillars with flange
PREN 1426 : DRAFT 2013 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
DIN EN ISO 17937:2016-01 Dentistry - Osteotome (ISO 17937:2015)
UNI EN ISO 16635-1 : 2014 DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH
PREN 10088-2 : DRAFT 2011 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
ISO 9154:2016 Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Procurement specification
BS ISO 26910-1 : 2009 SPRINGS - SHOT PEENING - PART 1: GENERAL PROCEDURES
API 5CRA : 2010 : INC : ERR 1 : 2011 SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
BS ISO 12891-2:2014 Retrieval and analysis of surgical implants Analysis of retrieved surgical implants
12/30246071 DC : 0 BS ISO 15787 - TECHNICAL PRODUCT DOCUMENTATION - HEAT-TREATED FERROUS PARTS - PRESENTATION AND INDICATIONS
13/30252136 DC : 0 BS ISO 16468 - INVESTMENT CASTINGS (STEEL, NICKEL ALLOYS AND COBALT ALLOYS) - GENERAL TECHNICAL REQUIREMENTS
BS ISO 404:2013 Steel and steel products. General technical delivery requirements
DIN EN ISO 7866:2013-01 Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012)
15/30312459 DC : 0 BS EN ISO 5182 - RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT
15/30304304 DC : 0 BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
05/30136491 DC : DRAFT JUL 2005 EN 15311 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS
API 11D1 REDLINE : 2009 PACKERS AND BRIDGE PLUGS
UNE-EN ISO 18556:2016 Dentistry - Intraoral spatulas (ISO 18556:2016)
05/30132585 DC : DRAFT APR 2005 EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
ABMA 10A : 2001 : R2015 METAL BALLS FOR UNGROUND BEARINGS AND OTHER USES
12/30250146 DC : 0 BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS
PREN 12697-31 : DRAFT 2014 BITUMINOUS MIXTURES - TEST METHODS - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
ISO 11119-3:2013 Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners
BS 2000-49(2015) : 2015 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
BS EN ISO 17078-3:2009 Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels
API SPEC 16F : 2017 SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT
BS EN ISO 12156-1:2016 Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method
API 11B : 2010 SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES
UNE-EN 14399-1:2016 High-strength structural bolting assemblies for preloading - Part 1: General requirements
ISO 15787:2016 Technical product documentation Heat-treated ferrous parts Presentation and indications
ISO 14661:2000 Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements
NF EN 3685 : 2008 AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA/650 DEGREES C - TECHNICAL SPECIFICATION
API SPEC 14L : 2007 SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
PREN 4111 : 200P2 AEROSPACE SERIES - WRENCHES, SPLINED, SOCKETS FOR PIPE FITTINGS - TECHNICAL SPECIFICATION
EN 12504-2:2012 TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER
BS EN ISO 11961:2008 Petroleum and natural gas industries. Steel drill pipe
I.S. EN ISO 12679:2015 THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011)
I.S. EN 62271-202:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION
UNI EN 16281 : 2013 CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 14998:2013 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013)
ISO 4875-2:2006 Metal-cutting band saw blades — Part 2: Characteristics and dimensions
PREN ISO 683-17 : DRAFT 2013 HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013)
I.S. EN ISO 9873:2017 DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017)
EN ISO 11961:2008/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
BS ISO 1711-2:2016 Assembly tools for screws and nuts. Technical specifications Machine-operated sockets (impact)
ISO 18137:2015 Leaf springs Technical specifications
DIN EN ISO 19715:2016-03 (Draft) DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017)
PREN 12797 : DRAFT 2017 BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS
UNE-ISO 289-1:2018 Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Part 1: Determination of Mooney viscosity
EN 3833:2004 Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1 550 MPa (at ambient temperature) / 650 °C - Technical specification
ISO 11119-2:2012 Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
ISO 16143-1:2014 Stainless steels for general purposes Part 1: Corrosion-resistant flat products
I.S. EN ISO 16635-2:2014 DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS (ISO 16635-2:2014)
PREN 12080 : DRAFT 2015 RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
API 19G1 : 2010 SIDE-POCKET MANDRELS
BS EN 3833:2004 Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated. Classification: 1550 MPa (at ambient temperature) / 650°C. Technical specification
NF EN ISO 17078-3 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS
NF ISO 7331 : 2011 SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS
UNE-EN 10088-4:2010 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
UNI EN 4700-007 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
UNI EN ISO 17078-3 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS
I.S. EN 4700-006:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
ISO 6336-5:2016 Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials
ISO 289-1:2015 Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 1: Determination of Mooney viscosity
EN 1426:2015 Bitumen and bituminous binders - Determination of needle penetration
I.S. EN 3299:2007 AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION
DIN EN ISO 3506-3:2010-04 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
DIN EN ISO 898-1:2013-05 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
DIN EN 14772 E : 2005 FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE EN 1514 AND EN 12560 SERIES OF STANDARDS
DIN EN 12080:2015-06 (Draft) RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
DIN EN 14566:2009-10 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN ISO 4498:2010-11 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
DIN EN 10297-1:2003-06 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
DIN EN 15049:2007-12 Railway applications - Suspension components - Torsion bar, steel
DIN EN ISO 898-5:2012-09 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
BS EN ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs
BS EN ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Nuts
ISO 11960:2014 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
UNE-EN ISO 6508-3:2015 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015)
ISO 18265:2013 Metallic materials — Conversion of hardness values
BS EN 12080:2017 Railway applications. Axleboxes. Rolling bearings
UNE-EN ISO 6508-2:2015 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015)
BS EN 4359:2006 Aerospace series. Six lobe recess. Drivers. Technical Specification
BS EN 14399-1:2015 High-strength structural bolting assemblies for preloading General requirements
I.S. EN ISO 14920:2015 THERMAL SPRAYING - SPRAYING AND FUSING OF SELF-FLUXING ALLOYS (ISO 14920:2015)
I.S. EN ISO 6508-2:2015 METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES AND INDENTERS (ISO 6508-2:2015)
I.S. EN 3302:2017 AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PM1708 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - TECHNICAL SPECIFICATION
I.S. EN ISO 13628-2:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
DIN EN 12513:2011-05 Founding - Abrasion resistant cast irons
I.S. EN ISO 6508-3:2015 METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3 - CALIBRATION OF REFERENCE BLOCKS (ISO 6508-3:2015)
I.S. EN ISO 7153-1:2016 SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS (ISO 7153-1:2016)
I.S. EN 12080:2017 RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
I.S. EN 892:2012 MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 10208-2:2009-07 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
EN 14772:2005 Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
I.S. EN ISO 15156-2:2015&LC:2015 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015)
I.S. EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
EN ISO 7866:2012/AC:2014 GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012/COR 1:2014)
I.S. EN 1426:2015 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
I.S. EN 10205:2016 COLD REDUCED TINMILL PRODUCTS - BLACKPLATE
DIN EN 10208-1:1998-02 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
DIN EN 10088-2:2014-12 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
EN ISO 15156-2:2015 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015)
I.S. EN ISO 18265:2013 METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013)
I.S. EN ISO 10432:2005 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT
I.S. EN ISO 898-1:2013 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
DIN EN 12697-31:2007-06 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
I.S. EN ISO 14310:2008 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS
I.S. EN 10083-2:2006 STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS
I.S. EN ISO 11960:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
I.S. EN 12513:2011 FOUNDING - ABRASION RESISTANT CAST IRONS
EN ISO 15156-3:2015 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015)
I.S. EN ISO 9173-1:2016 DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016)
I.S. EN ISO 683-17:2014 HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014)
DIN EN 12080:2017-11 Railway applications - Axleboxes - Rolling bearings
DIN EN 10083-3:2007-01 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
I.S. EN 14566:2008 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN ISO 898-5:2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012)
I.S. EN ISO 16070:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES
DIN EN 957-1:1999-02 STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 12504-2:2012 TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER
I.S. EN ISO 4498:2010 SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS
I.S. EN ISO 3506-3:2009 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS
I.S. EN 14399-1:2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS
UNI EN ISO 14998 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES
SBAC TS 220 : 1 TECHNICAL SPECIFICATION FOR UNION NUTS, SELF-LOCKING (UNIFIED THREADS) - HIGH TEMPERATURE NICKEL ALLOY INCONEL 718 CLASSIFICATION R[M] >= 1270 MPA (185000 LBF/IN[2]) @ T[A]/+705 DEGREES C
VDI/VDE 2616 Blatt 1:2012-08 Hardness testing of metallic materials
VDI/VDE 2616 Blatt 2:2014-07 Hardness testing of plastics and elastomers
VDI 3405 Blatt 2:2013-08 Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing
DIN EN ISO 16635-2 E : 2014 DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS (ISO 16635-2:2014)
UNE-EN ISO 12690:2011 Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010)
DIN EN 16630:2015-06 PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 3389:2009 Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy). Classification: 1210 MPa/730°C. Manufacturing method optional. Technical specification
09/30214454 DC : 0 BS EN 2576 - AEROSPACE SERIES BOLTS, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286) CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C TECHNICAL SPECIFICATION
DIN EN ISO 26443:2016-09 Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings (ISO 26443:2008)
API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015 SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
06/30143291 DC : DRAFT MAY 2006 ISO 5182 - WELDING - MATERIALS FOR RESISTANCE WELDING ELECTRODES AND ANCILLARY EQUIPMENT
NF EN ISO 9809-3 : 2011 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
API SPEC 19OH : 2018 OPENHOLE ISOLATION EQUIPMENT
08/30160607 DC : DRAFT MAY 2008 BS ISO 26910-1 - SPRINGS - SHOT PEENING - PART 1: GENERAL PROCEDURES
14/30278521 DC : 0 BS EN ISO 18556 - DENTISTRY - INTRAORAL SPATULAS
BS ISO 17541:2014 Plastics. Quantitative evaluation of scratch-induced damage and scratch visibility
BS EN ISO 12690:2010 Metallic and other inorganic coatings. Thermal spray coordination. Tasks and responsibilities
DIN EN ISO 16635-1:2014-09 DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013)
BS EN 3388:2009 Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification 1275 MPa/650°C. Manufacturing method optional. Technical specification
BS EN 16281:2013 Child protective products. Consumer fitted child resistant locking devices for windows and balcony doors. Safety requirements and test methods
BS EN 4700-004:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire
BS EN 12697-31:2007 Bituminous mixtures. Test methods for hot mix asphalt Specimen preparation by gyratory compactor
ISO 10071-1:2008 Tools for pressing — Ball-lock punches — Part 1: Ball-lock punches for light duty
I.S. EN 957-1:2005 STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
BS ISO 17918:2015 Corrosion of metals and alloys. Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
15/30285035 DC : 0 BS EN ISO 14917 - THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION
BS EN ISO 17078-4:2010 Petroleum and natural gas industries. Drilling and production equipment Practices for side-pocket mandrels and related equipment CD-ROM
BS ISO 9154:2016 Aerospace. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification
ISO 7241:2014 Hydraulic fluid power — Dimensions and requirements of quick-action couplings
04/30074924 DC : DRAFT JUNE 2004 EN ISO 6508-3 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION AND REFERENCE BLOCKS (SCALES A, B, C, D, E, F, G, H, K, N, T)
BS ISO 9182-3:2013 Tools for pressing. Guide pillars Type B, end-locking pillars
I.S. EN 843-4:2005 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS
DIN EN 10205:1992-01 COLD REDUCED TIN-MILL PRODUCTS - BLACKPLATE
03/114555 DC : DRAFT SEP 2003 EN 14772 - FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560
BS ISO 5287:2003 Belt drives. Narrow V-belts for the automotive industry. Fatigue test
ISO 9448-10:2013 Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2
API 19G1 CHINESE : 2010 SIDE-POCKET MANDRELS
BS EN 16630:2015 Permanently installed outdoor fitness equipment. Safety requirements and test methods
BS ISO 9448-7:2013 Tools for pressing. Guide bushes Form F, ball cage bushes, flanged, type 1
05/30128683 DC : DRAFT FEB 2005 ISO 5857 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1250 MPA - PROCUREMENT SPECIFICATION
API 16A : 2017 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
17/30370705 DC : 0 BS EN 3685 - AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA/650 DEGREE C - TECHNICAL SPECIFICATION
BS ISO 11749:2014 Belt drive. V-ribbed belts for the automotive industry. Fatigue test
BS EN 4700-002:2016 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section
08/30182454 DC : DRAFT JULY 2008 BS EN 10208-1 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
UNI EN 4700-005 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
DIN EN ISO 18556:2016-09 DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016)
DIN EN ISO 12670 E : 2015 THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011)
PREN 14399-9 : DRAFT 2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
UNI ISO 9656 : 2011 PLIERS AND NIPPERS FOR ELECTRONICS - TEST METHODS
14/30295082 DC : 0 BS ISO 683-3 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 3: CASE HARDENING STEELS
S.R. CWA 17094-3:2016 POLICE FIREARMS TECHNOLOGY - PART 3: POLICE SHOTGUN AMMUNITION FEATURES - RECOMMENDATIONS
I.S. EN 10083-1:2006 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
14/30301841 DC : 0 BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
UNI EN 4700-004 : 2011 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire
BS ISO 18869:2017 Hydraulic fluid power. Test methods for couplings actuated with or without tools
15/30269176 DC : 0 BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS
11/30254171 DC : 0 BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
I.S. EN 16602-70-46:2014 SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS
12/30245294 DC : 0 BS ISO 16635-1 - DENTISTRY - DENTAL DAM TECHNIQUE - PART 1: HOLE PUNCH
BS EN ISO 9809-3:2010 Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Normalized steel cylinders
BS ISO 5857:2008 Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1250 MPa. Procurement specification
BS ISO 9182-2:2013 Tools for pressing. Guide pillars Type A, straight pillars
DIN EN ISO 17945 E : 2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015)
UNI EN ISO 15630-3 : 2010 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
05/30133728 DC : DRAFT MAY 2005 EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
API 5DP : 2010(R2015) SPECIFICATION FOR DRILL PIPE
11/30210148 DC : 0 BS EN ISO 18265 - METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES
BS ISO 9448-8:2013 Tools for pressing. Guide bushes Form G, gliding bushes, stepped, type 1
S.R. CWA 17094-1:2016 POLICE FIREARMS TECHNOLOGY - PART 1: POLICE PISTOL AND RIFLE AMMUNITION FEATURES - RECOMMENDATIONS
DIN EN ISO 9809-3:2010-10 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
17/30352970 DC : 0 BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
11/30230615 DC : 0 BS ISO 683-1 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING
DIN EN ISO 12679 E : 2015 THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011)
17/30359115 DC : 0 BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD
I.S. EN ISO 19490:2017 DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017)
DIN EN ISO 14917:2015-09 (Draft) THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017)
BS ISO 18137:2015 Leaf springs. Technical specifications
BS ISO 14661:2000 Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements
02/106220 DC : 0 BS EN 14566 - MECHANICAL FASTENERS FOR PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
05/30132603 DC : DRAFT APR 2005 EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
05/30126202 DC : 0 EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
BS ISO 5743:2004 Pliers and nippers. General technical requirements
BS EN ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread
BS EN 10083-3 : 2006-08 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
API 19G4 : 2011 PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT
DIN EN ISO 19490 E : 2017 DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017)
I.S. EN ISO 12670:2015 THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011)
PREN 71-1 : DRAFT 2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
ISO 17541:2014 Plastics Quantitative evaluation of scratch-induced damage and scratch visibility
API SPEC 17K : 2017 SPECIFICATION FOR BONDED FLEXIBLE PIPE
BS EN ISO 12679:2015 Thermal spraying. Recommendations for thermal spraying
UNE-EN ISO 12156-1:2016 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016)
DIN EN 14399-9:2016-01 (Draft) HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
API 11D1 CHINESE : 2009 PACKERS AND BRIDGE PLUGS
DIN EN ISO 19490:2016-07 (Draft) DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017)
I.S. EN 4700-001:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
I.S. EN ISO 16635-1:2014 DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013)
I.S. EN ISO 20957-1:2013 STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-1:2013)
UNI EN 71-1 : 2015 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
I.S. EN 893:2010 MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 3833:2005 AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C - TECHNICAL SPECIFICATION
ISO 15461:2018 Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests
UNI EN 4700-003 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
ISO 11119-1:2012 Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
ISO 13584-511:2006 Industrial automation systems and integration — Parts library — Part 511: Mechanical systems and components for general use — Reference dictionary for fasteners
BS ISO 1711-1:2016 Assembly tools for screws and nuts. Technical specifications Hand-operated wrenches and sockets
I.S. EN ISO 7866:2012 GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012)
UNE-EN ISO 16635-1:2014 Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-1:2013)
I.S. EN 12697-31:2007 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
UNE-EN ISO 898-2:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)
UNE-EN ISO 14917:2017 Thermal spraying - Terminology, classification (ISO 14917:2017)
14/30310358 DC : 0 BS EN 12697-31 - BITUMINOUS MIXTURES - TEST METHODS - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
UNE-EN 10205:2017 Cold reduced tinmill products - Blackplate
ISO 11119-4:2016 Gas cylinders Refillable composite gas cylinders Design, construction and testing Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners
UNI EN ISO 7866 : 2012 GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING
NF EN 3388 : 2009 AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION
ISO 1711-1:2016 Assembly tools for screws and nuts Technical specifications Part 1: Hand-operated wrenches and sockets
ISO 9809-4:2014 Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa
DIN EN 71-1:2015-02 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
UNI EN ISO 11961 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
ISO 16936-1:2005 Glass in building — Forced-entry security glazing — Part 1: Test and classification by repetitive ball drop
ISO 9448-3:2013 Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1
I.S. EN ISO 7492:2018 DENTISTRY - DENTAL EXPLORER (ISO 7492:2018)
ISO 7492:2018 Dentistry — Dental explorer
ISO 26910-1:2009 Springs — Shot peening — Part 1: General procedures
I.S. EN ISO 17078-3:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS
ISO 9448-4:2013 Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1
ISO 9182-4:2013 Tools for pressing Guide pillars Part 4: Type C, pillars with taper lead and bush
UNE-EN 10088-2:2015 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
I.S. EN 3388:2009 AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION
DIN EN 10083-1:2006-10 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 1426:2015-09 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
DIN EN ISO 683-17:2015-02 Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014)
EN ISO 13628-2:2006/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
DIN EN ISO 11960:2014-05 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM
UNE-EN 10208-1:2011 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A
DIN EN 10089:2003-04 Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002
DIN EN 14566 E : 2009 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
ISO 17078-4:2010 Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment
BS EN 957-1:2005 Stationary training equipment General safety requirements and test methods
UNE-EN 62271-202:2015 High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation
BS EN 10208-2:2009 Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B
BS EN ISO 642:1999 Steel hardenability test by end quenching (Jominy test)
BS EN ISO 14923:2003 Thermal spraying. Characterization and testing of thermally sprayed coatings
UNE-EN 1426:2015 Bitumen and bituminous binders - Determination of needle penetration
BS EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
ISO 16635-1:2013 Dentistry — Dental rubber dam technique — Part 1: Hole punch
BS EN 14059:2002 Decorative oil lamps. Safety requirements and test methods
BS EN ISO 17078-2:2007 Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels
BS EN 657:2005 Thermal spraying. Terminology, classification
ISO 26443:2008 Fine ceramics (advanced ceramics, advanced technical ceramics) — Rockwell indentation test for evaluation of adhesion of ceramic coatings
ISO 9173-1:2016 Dentistry — Extraction forceps — Part 1: General requirements
UNE-EN ISO 14920:2015 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015)
UNI EN ISO 3506-2 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 2: NUTS
ONORM EN ISO 13680 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
UNI EN ISO 13680 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
ONORM EN ISO 3506-2 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS
EN ISO 13680:2010 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010)
EN ISO 12156-1:2016 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016)
UNI EN ISO 3506-1 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
UNI EN 12504-2 : 2012 TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER
ONORM EN ISO 3506-1 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
EN ISO 16635-1:2014 Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-1:2013)
EN ISO 17937:2015 Dentistry - Osteotome (ISO 17937:2015)
EN ISO 14923:2003 Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003)
UNI EN 10208-2 : 2009 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
UNI EN ISO 17078-2 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS
UNI EN ISO 4498 : 2010 SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS
UNI EN ISO 683-17 : 2014 HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS
UNI EN ISO 17078-1 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
UNI EN 12513 : 2011 Founding - Abrasion resistant cast irons
UNI EN 10083-1 : 2006 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNI EN ISO 18265 : 2014 METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES
UNI EN 893 : 2011 MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS
UNI EN 10083-3 : 2006 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
EN ISO 10432:2004 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004)
UNI EN 10218-1 : 2012 STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS
UNI EN 10208-1 : 2009 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
UNI EN ISO 13628-2 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
UNI EN ISO 898-1 : 2013 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
UNI EN ISO 3506-3 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS
UNI EN 14566 : 2009 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN ISO 14310 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS
UNI EN 10084 : 2008 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
EN ISO 13628-10:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006)
UNI EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNI EN ISO 898-5 : 2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD
UNI ISO 9657 : 2011 PLIERS AND NIPPERS FOR ELECTRONICS - GENERAL TECHNICAL REQUIREMENTS
10/30165716 DC : 0 BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD
07/30161097 DC : 0 EN ISO 14310 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT PACKERS AND BRIDGE PLUGS
BS ISO 9448-9:2013 Tools for pressing. Guide bushes Form B, ball cage bushes, plain, type 2
NF EN ISO 9809-2 : 2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
BS ISO 12670 : 2011 COR 2015 THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS
16/30302544 DC : 0 BS EN ISO 9873 - DENTISTRY - INTRA-ORAL MIRRORS
10/30196823 DC : 0 BS ISO 12670 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS
I.S. EN ISO 5182:2016 RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016)
API SPEC 5CRA : 2010 SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
09/30196832 DC : 0 BS ISO 12690 - THERMAL SPRAYING - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES
03/302675 DC : DRAFT FEB 2003 EN 14616 - THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING
BS EN ISO 22068:2014 Sintered-metal injection-moulded materials. Specifications
13/30276463 DC : 0 BS ISO 289-1 - RUBBER, UNVULCANIZED - DETERMINATIONS USING A SHEARING-DISC VISCOMETER - PART 1: DETERMINATION OF MOONEY VISCOSITY
DIN EN 10088-4:2010-01 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
13/30264734 DC : 0 BS ISO 17918 - EVALUATION OF SELECTIVE CORROSION OF ALLOYS BY VISUAL INSPECTION AND HARDNESS MEASUREMENT
BS ISO 6787:2001 Assembly tools for screws and nuts. Adjustable wrenches
API 14A : 2015 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
DIN EN ISO 12679:2015-12 THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011)
BS EN ISO 5182:2009 Resistance welding. Materials for electrodes and ancillary equipment
15/30323937 DC : 0 BS EN 3302 - AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PM1708 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - TECHNICAL SPECIFICATION
06/30148173 DC : DRAFT SEP 2006 ISO 9809-1 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
BS ISO 7241:2014 Hydraulic fluid power. Dimensions and requirements of quick-action couplings
DIN EN 16630 E : 2015 PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
DIN ISO 7331:2011-10 Ski-poles for alpine skiing - Requirements and test methods (ISO 7331:2011)
10/30196135 DC : 0 BS ISO 11515 - GAS CYLINDERS - REFILABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING
UNI EN ISO 22068 : 2014 SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS
13/30252560 DC : 0 BS ISO 7241-1 - HYDRAULIC FLUID POWER - QUICK-ACTION COUPLINGS - PART 1: DIMENSIONS AND REQUIREMENTS
I.S. EN 4700-002:2016 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
ISO 10384:2012 Hot-rolled carbon steel sheet as defined by chemical composition
BS ISO 9448-11:2013 Tools for pressing. Guide bushes Form F, ball cage bushes, flanged, type 2
UNE-EN ISO 12679:2016 Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011)
11/30254168 DC : 0 BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
17/30323194 DC : 0 BS EN ISO 20569 - DENTISTRY - TREPHINE BURS
BS EN 4700-003:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube
BS EN ISO 15156-3:2015 Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
DIN EN 16281:2013-04 CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
13/30248090 DC : 0 BS ISO 11951 - COLD-REDUCED BLACKPLATE IN COIL FORM FOR THE PRODUCTION OF TINPLATE OR ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL
14/30294825 DC : 0 BS EN 10263-1 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
I.S. EN 3389:2009 AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREE C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION
BS ISO 9448-3:2013 Tools for pressing. Guide bushes Form B, ball cage bushes, plain, type 1
DIN EN ISO 17937 E : 2016 DENTISTRY - OSTEOTOME (ISO 17937:2015)
BS ISO 9809-4:2014 Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Stainless steel cylinders with an Rm value of less than 1 100 MPa
11/30253929 DC : 0 BS EN 4820 - AEROSPACE SERIES - COPPER AND COPPER ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION
05/30136401 DC : DRAFT JULY 2005 ISO 8642 - AEROSPACE - SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERATURE GREATER THAN 425 DEGREES C - TEST METHODS
11/30230612 DC : 0 BS ISO 683-11 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 11: CASE-HARDENING STEELS
13/30242622 DC : 0 BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS
API 14L : 2007 : R2012 SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
API 6DSS : 2017-08 SPECIFICATION FOR SUBSEA PIPELINE VALVES
04/30107683 DC : DRAFT DEC 2004 BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS
04/30103964 DC : DRAFT MAY 2004 BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES
BS EN ISO 9873:2017 Dentistry. Intra-oral mirrors
ABMA 10A : 2001 METAL BALLS FOR UNGROUND BEARINGS AND OTHER USES
ISO 9448-5:2013 Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1
API 20A : 2017 CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY
BS EN 10263-1:2017 Steel rod, bars and wire for cold heading and cold extrusion General technical delivery conditions
DIN EN ISO 9809-1:2010-10 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
NF EN ISO 11961 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
IS 1367 : Part 3 : 2017 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS
BS EN 10088-4:2009 Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
ISO 6787:2018 Assembly tools for screws and nuts — Adjustable wrenches
API 17J REDLINE : 2008 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
I.S. EN ISO 17937:2015 DENTISTRY - OSTEOTOME (ISO 17937:2015)
API 14A RUSSIAN : 2001 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
API 19G3 : 2011 RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS
ISO 10432:2004 Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment
I.S. EN ISO 26443:2016 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC COATINGS (ISO 26443:2008)
ISO 9448-8:2013 Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1
BS EN ISO 7492:2018 Dentistry. Dental explorer
NF EN ISO 12690 : 2011 METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES
UNI EN 15638 : 2009 ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS
ISO 15630-3:2010 Steel for the reinforcement and prestressing of concrete Test methods Part 3: Prestressing steel
ONORM EN ISO 11960 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
I.S. EN 15638:2009 ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS
UNI EN 1627 : 2011 PEDESTRIAN DOORSETS, WINDOWS, CURTAIN WALLING, GRILLES AND SHUTTERS - BURGLAR RESISTANCE - REQUIREMENTS AND CLASSIFICATION
BS ISO 4960:2007 Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %
I.S. EN ISO 3266:2010 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010)
UNI EN ISO 898-2 : 2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
ONORM EN ISO 11961 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
ISO 2415:2004 Forged shackles for general lifting purposes — Dee shackles and bow shackles
DIN EN ISO 9873 E : 2000 DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017)
DIN EN ISO 15630-3:2011-02 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
ISO 16936-2:2005 Glass in building — Forced-entry security glazing — Part 2: Test and classification by repetitive impact of a hammer and axe at room temperature
18/30368675 DC : 0 BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
UNI EN 4700-001 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
I.S. EN 3685:2008 AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 1100 MPA/650 DEGREE C - TECHNICAL SPECIFICATION
I.S. EN ISO 12156-1:2016 DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD (ISO 12156-1:2016)
EN 10083-3:2006/AC:2008 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
ISO 9182-5:2013 Tools for pressing Guide pillars Part 5: Type D, end-locking pillars with flange
ISO 12891-2:2014 Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants
ISO 6932:2014 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
ISO 15601:2000 Hammers — Technical specifications concerning steel hammer heads — Test procedures
ISO 12156-1:2016 Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method
ISO 11515:2013 Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing
EN ISO 15630-3:2010 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010)
I.S. EN ISO 12690:2010 METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES
ISO 1711-2:2016 Assembly tools for screws and nuts Technical specifications Part 2: Machine-operated sockets (impact)
ISO 9182-2:2013 Tools for pressing — Guide pillars — Part 2: Type A, straight pillars
I.S. EN 4700-005:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
ISO 10071-2:2005 Tools for pressing Ball-lock punches Part 2: Ball-lock punches for heavy duty
I.S. EN 71-1:2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
ISO 683-11:2012 Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels
I.S. EN 10263-1:2017 STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
ISO 9657:2004 Pliers and nippers for electronics — General technical requirements
ISO 9448-2:2013 Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1
ONORM EN ISO 9809-3 : 2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
DIN EN 893:2011-02 MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 1097-2:2016-07 (Draft) TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
UNE-EN 10208-2:2011 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
DIN EN 12504-2 E : 2012 TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER
DIN EN ISO 14920:2015-04 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015)
DIN EN 15049 E : 2007 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL
DIN EN 10084:2008-06 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
DIN EN ISO 18265:2014-02 METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013)
BS EN ISO 13680:2010 Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions
BS EN ISO 10432:2004 Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
ISO 13680:2010 Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions
ISO 19715:2017 Dentistry — Filling instrument with contra angle
ISO 12679:2011 Thermal spraying Recommendations for thermal spraying
BS EN ISO 13628-10:2006 Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe
I.S. EN 1097-2:2010 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
BS EN ISO 15156-2:2015 Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons
BS EN 12513:2011 Founding. Abrasion resistant cast irons
UNE-EN ISO 3506-2:2010 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009)
ISO 17937:2015 Dentistry Osteotome
BS EN 10084 : 2008-06 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
ISO 15156-3:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
ISO 7331:2011 Ski-poles for alpine skiing Requirements and test methods
ISO 12690:2010 Metallic and other inorganic coatings Thermal spray coordination Tasks and responsibilities
ISO 7153-1:2016 Surgical instruments Materials Part 1: Metals
ISO 3266:2010 Forged steel eyebolts grade 4 for general lifting purposes
UNE-EN ISO 7153-1:2017 Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016)
BS EN ISO 4498:2010 Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness
EN ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
ISO 16070:2005 Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples
I.S. EN ISO 3506-2:2009 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS
BS EN 10083-2:2006 Steels for quenching and tempering Technical delivery conditions for non alloy steels
BS EN ISO 15136-2:2006 Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
ISO 17078-2:2007 Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels
ONORM EN ISO 9809-2 : 2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
BS EN 10218-1:2012 Steel wire and wire products. General Test methods
ISO 14917:2017 Thermal spraying — Terminology, classification
ISO 16635-2:2014 Dentistry Dental rubber dam instruments Part 2: Clamp forceps
BS EN ISO 16070:2005 Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples
UNI EN 1097-2 : 2010 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
UNE-EN 893:2011 Mountaineering equipment - Crampons - Safety requirements and test methods
ISO 15136-2:2006 Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems
BS EN 892 : 2012 MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 10083-1:2006 Steels for quenching and tempering General technical delivery conditions
ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread
ISO 9809-2:2010 Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa
BS EN 15311:2007 Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions
ISO 18556:2016 Dentistry Intraoral spatulas
ISO 14923:2003 Thermal spraying Characterization and testing of thermally sprayed coatings
ISO 4498:2010 Sintered metal materials, excluding hardmetals Determination of apparent hardness and microhardness
ISO 20957-1:2013 Stationary training equipment Part 1: General safety requirements and test methods
ISO 14920:2015 Thermal spraying — Spraying and fusing of self-fluxing alloys
BS EN ISO 14920:2015 Thermal spraying. Spraying and fusing of self-fluxing alloys
BS EN ISO 683-17:2014 Heat-treated steels, alloy steels and free-cutting steels Ball and roller bearing steels
ISO 7866:2012 Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing
BS EN ISO 9173-1:2016 Dentistry. Extraction forceps General requirements
ISO 9809-3:2010 Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders
ISO 14998:2013 Petroleum and natural gas industries — Downhole equipment — Completion accessories
ISO 6508-2:2015 Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
ISO 14310:2008 Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs
ISO 9809-1:2010 Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
ISO 15156-2:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
ISO 13625:2002 Petroleum and natural gas industries — Drilling and production equipment — Marine drilling riser couplings
ISO 6508-3:2015 Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks
IEC 62271-202:2014 High-voltage switchgear and controlgear - Part 202: High-voltage/ low-voltage prefabricated substation
ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
ISO 683-17:2014 Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels
BS EN ISO 17078-1 : 2004 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
BS EN 15049:2007 Railway applications. Suspension components. Torsion bar, steel
BS EN 3299:2007 Aerospace series. Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated. Technical specification
ISO 5182:2016 Resistance welding Materials for electrodes and ancillary equipment
UNE-EN ISO 3506-3:2010 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
UNE-EN 892:2013 Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
BS EN 1426:2015 Bitumen and bituminous binders. Determination of needle penetration
BS EN 1097-2:2010 Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation
UNE-EN ISO 18265:2014 Metallic materials - Conversion of hardness values (ISO 18265:2013)
ISO 22068:2012 Sintered-metal injection-moulded materials — Specifications
I.S. EN ISO 3506-1:2009 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
ISO 19490:2017 Dentistry — Sinus membrane elevator
ISO 17078-3:2009 Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels
UNE-EN ISO 683-17:2015 Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014)
ISO 12670:2011 Thermal spraying — Components with thermally sprayed coatings — Technical supply conditions
UNE-EN ISO 898-5:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
UNE-EN 10218-1:2012 Steel wire and wire products - General - Part 1: Test methods
EN ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009)
UNE-EN ISO 7866:2013 Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012)
UNE-EN ISO 9873:2017 Dentistry - Intra-oral mirrors (ISO 9873:2017)
ISO 9182-3:2013 Tools for pressing Guide pillars Part 3: Type B, end-locking pillars
ISO 17078-1:2004 Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels
ISO 17945:2015 Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
ISO 13628-2:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
ISO 642:1999 Steel — Hardenability test by end quenching (Jominy test)
UNE 16513:2012 Assembly tools for screws and nuts. Single head engineer's wrenches. Characteristics and tests methods.
EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)
EN ISO 17945:2015 Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015)
EN 14399-1:2015 High-strength structural bolting assemblies for preloading - Part 1: General requirements
EN 14059:2002 Decorative oil lamps - Safety requirements and test methods
EN ISO 683-17:2014 Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014)
EN ISO 12679:2015 Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011)
EN ISO 18556:2016 Dentistry - Intraoral spatulas (ISO 18556:2016)
EN 14616:2004 Thermal spraying - Recommendations for thermal spraying
EN ISO 17078-3:2009 Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009)
EN 16630:2015 Permanently installed outdoor fitness equipment - Safety requirements and test methods
EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
EN 4700-005:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock
EN ISO 7153-1:2016 Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016)
EN ISO 20957-1:2013 Stationary training equipment - Part 1: General safety requirements and test methods (ISO 20957-1:2013)
EN 15049:2007 Railway applications - Suspension components - Torsion bar, steel
EN ISO 5182:2016 RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016)
EN 14399-9:2018 High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies
EN 16451:2015 Railway applications - Braking - Brake pad holder
EN 16602-70-46:2014 Space product assurance - Requirements for manufacturing and procurement of threaded fasteners
EN 4700-003:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube
EN ISO 19490:2017 Dentistry - Sinus membrane elevator (ISO 19490:2017)
EN ISO 14920:2015 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015)
EN ISO 18265:2013 Metallic materials - Conversion of hardness values (ISO 18265:2013)
EN 15638:2009 Ice skates - Safety requirements and test methods
EN 843-4 : 2005 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS
EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
EN ISO 14310:2008 Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008)
EN ISO 9809-1:2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa (ISO 9809-1:2010)
EN 657:2005 Thermal spraying - Terminology, classification
EN ISO 9809-3:2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010)
EN ISO 14917:2017 Thermal spraying - Terminology, classification (ISO 14917:2017)
EN 15311:2007 Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions
EN 4700-007:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock
EN 4359:2006 Aerospace series - Six lobe recess - Drivers - Technical specification
EN ISO 3266:2010/A1:2015 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015)
EN ISO 16635-2:2014 Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps(ISO 16635-2:2014)
EN ISO 9809-2:2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2010)
EN ISO 642:1999 Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999)
EN ISO 19715:2017 Dentistry - Filling instrument with contra angle (ISO 19715:2017)
EN ISO 16070:2005 Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005)
EN 14566:2008+A1:2009 Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods
EN 16281:2013 Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods
EN 3299:2007 Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification
EN ISO 14998:2013 Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013)
EN ISO 17078-4:2010 Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010)
EN 3685 : 2008 AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 1100 MPA/650 DEGREE C - TECHNICAL SPECIFICATION
EN ISO 15136-2:2006 Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006)
EN 957-1:2005 Stationary training equipment - Part 1: General safety requirements and test methods
EN 3388 : 2009 AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION
EN ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
EN 4700-004:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire
EN 3302:2017 Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Technical specification
EN 4700-001:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip
EN ISO 13625:2002 Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002)
EN ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
EN 4700-006:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings
EN ISO 12670:2015 Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011)
EN 3389 : 2009 AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREE C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION
EN 893:2010 Mountaineering equipment - Crampons - Safety requirements and test methods
BIS IS 3660-7 : 2013 METHODS OF TEST FOR NATURAL RUBBER - PART 7: DETERMINATION OF MOONEY VISCOSITY
DIN EN ISO 19715 E : 2017 DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017)
09/30214463 DC : 0 BS EN 2582 - AEROSPACE SERIES BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE C TECHNICAL SPECIFICATION
BS EN 16451:2015 Railway applications. Braking. Brake pad holder
04/30105010 DC : DRAFT JUL 2004 ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD
BS ISO 8642:2008 Aerospace. Self-locking nuts with maximum operating temperature greater than 425 degrees C. Test methods
DIN EN ISO 22068:2014-06 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)
I.S. EN 10208-1:2009 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
BS EN ISO 16635-1:2014 Dentistry. Dental rubber dam technique Hole punch
DIN EN 15638 E : 2009 ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS
PREN 10263-1 : DRAFT 2014 STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 1627:2011-09 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification
BS ISO 9448-5:2013 Tools for pressing. Guide bushes Form D, ball cage bushes, headed, type 1
DIN EN ISO 12670:2015-12 THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011)
ISO 13533:2001 Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment
BS ISO 9448-6:2013 Tools for pressing. Guide bushes Form E, gliding bushes, flanged, type 1
EN ISO 11960:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
08/30146353 DC : DRAFT MAR 2008 BS EN ISO 17078-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT
BS ISO 16468:2015 Investment castings (steel, nickel alloys and cobalt alloys). General technical requirements
16/30320762 DC : 0 BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
BS EN ISO 26443:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Rockwell indentation test for evaluation of adhesion of ceramic coatings
BS EN 15638:2009 Ice skates. Safety requirements and test methods
16/30327498 DC : 0 BS ISO 1711-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - TECHNICAL SPECIFICATIONS - PART 1: HAND-OPERATED WRENCHES AND SOCKETS
API 16A CHINESE : 2004 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
17/30352980 DC : 0 BS EN ISO 14918 - THERMAL SPRAYING - QUALIFICATION TESTING OF THERMAL SPRAYERS
17/30361675 DC : 0 BS EN 3299 - AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER-PLATED - TECHNICAL SPECIFICATION
I.S. EN 4700-003:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
PREN 10088-3 : DRAFT 2011 STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNE-EN ISO 17937:2016 Dentistry - Osteotome (ISO 17937:2015)
DIN ISO 4498 E : 2005 SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS
BS EN ISO 17945:2015 Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
13/30280533 DC : 0 BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25%
07/30162947 DC : 0 BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
03/306713 DC : DRAFT APR 2003 EN 657 - THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION
DIN ISO 12844 E : 2006 RAW OPTICAL GLASS - GRINDABILITY WITH DIAMOND PELLETS - TEST METHOD AND CLASSIFICATION
BS EN 4700-007:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock
03/311760 DC : DRAFT JULY 2003 ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT
12/30246399 DC : 0 BS ISO 11749 - BELT DRIVE - V-RIBBED BELTS FOR THE AUTOMOTIVE INDUSTRY - FATIGUE TEST
BS ISO 9657:2004 Pliers and nippers for electronics. General technical requirements
ONORM EN ISO 7866 : 2014 GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012 + COR 1:2014)
DIN EN ISO 17945:2015-08 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015)
DIN EN 16451 E : 2015 RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
API 5CRA CHINESE : 2011 SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
PD CEN/TS 16700:2014 Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of resistance to impact of a coating on a wooden substrate
13/30286138 DC : 0 BS EN 16654 - CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED FINGER PROTECTION DEVICES FOR DOORS - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN ISO 9809-2:2010-10 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
BS ISO 16143-1:2014 Stainless steels for general purposes Corrosion-resistant flat products
UNE-EN 16281:2013 Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods
06/30151815 DC : 0 BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS
UNE-EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)
BS ISO 12679 : 2011 THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING
UNE-EN 71-1:2015 Safety of toys - Part 1: Mechanical and physical properties
10/30165712 DC : 0 BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD
BS ISO 6336-5:2016 Calculation of load capacity of spur and helical gears Strength and quality of materials
15/30332554 DC : 0 BS EN 14399-9 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
17/30344532 DC : 0 BS ISO 6502-3 - RUBBER - MEASUREMENT OF VULCANIZATION CHARACTERISTICS USING CUREMETERS - PART 3: ROTORLESS CUREMETER
08/30182457 DC : DRAFT JULY 2008 BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
BS EN ISO 17937:2015 Dentistry. Osteotome
DD CEN/TS 1071-8:2004 Advanced technical ceramics. Methods of test for ceramic coatings Rockwell indentation test for evaluation of adhesion
ABMA ISO 14190 : 1997 AEROSPACE - AIRFRAME ROLLING BEARINGS: BALL AND SPHERICAL ROLLER BEARINGS - TECHNICAL SPECIFICATION
BS EN ISO 15630-3:2010 Steel for the reinforcement and prestressing of concrete. Test methods Prestressing steel
BS ISO 11515 : 2013 GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING
17/30335249 DC : 0 BS EN ISO 898-3 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 3: FLAT WASHERS WITH SPECIFIED PROPERTY CLASSES
BS ISO 5182 : 2008 RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT
BS ISO 6932:2014 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
BS A 363:2000 Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification
03/313799 DC : DRAFT AUG 2003 ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
API 19G2 : 2010 FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS
UNE-EN 16630:2015 Permanently installed outdoor fitness equipment - Safety requirements and test methods
BS EN 71-1 : 2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
BS EN 3685:2008 Aerospace series. Bolts in heat resisting steel FE-PA2601 (A286). Classification: 1100 MPa/650 °C. Technical specification
05/30132598 DC : DRAFT APR 2005 EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS
03/314809 DC : DRAFT SEP 2003 EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
BS 2A 295:2000 Nuts, self-locking, with maximum operating temperature less than or equal to 425°C. Test methods
ISO 9448-11:2013 Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2
UNI EN ISO 9809-2 : 2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
API SPEC 16C : 2015 CHOKE AND KILL EQUIPMENT
DIN EN ISO 12690:2011-04 Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010)
DIN EN ISO 15630-3 E : 2011 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
I.S. EN ISO 19715:2017 DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017)
API SPEC 19AC : 2016 SPECIFICATION FOR COMPLETION ACCESSORIES
PREN 4700-002 : 200P3 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
I.S. EN 16451:2015 RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
ISO 8124-1:2018 Safety of toys — Part 1: Safety aspects related to mechanical and physical properties
I.S. EN 1627:2011 PEDESTRIAN DOORSETS, WINDOWS, CURTAIN WALLING, GRILLES AND SHUTTERS - BURGLAR RESISTANCE - REQUIREMENTS AND CLASSIFICATION
UNE 16559:2000 Pipe cutting tools. Plastic and cooper pipe automatic cutters. Specifications and tests.
I.S. EN ISO 22068:2014 SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012)
ISO 5718:2013 Harvesting equipment — Blades for agricultural rotary mowers — Requirements
I.S. EN 16630:2015 PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 15156-3:2015&LC:2015 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015)
EN 71-1:2014 Safety of toys - Part 1: Mechanical and physical properties
ISO 18869:2017 Hydraulic fluid power — Test methods for couplings actuated with or without tools
EN ISO 7492:2018 Dentistry - Dental explorer (ISO 7492:2018)
ISO 7689:2008 Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa Procurement specification
I.S. EN 4700-004:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE
ISO 7481:2000 Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C — Test methods
BS EN 14399-9:2009 High strength structural bolting for preloading System HR or HV. Direct tension indicators for bolt and nut assemblies
ISO 9656:2004 Pliers and nippers for electronics — Test methods
UNI EN 10088-4 : 2009 STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
UNI EN ISO 20957-1 : 2013 STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 11961:2008 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
ASTM A 1058 : 2014 : REDLINE Standard Test Methods for Mechanical Testing of Steel Products—Metric
ISO 4254-13:2012 Agricultural machinery — Safety — Part 13: Large rotary mowers
BS ISO 5718:2013 Harvesting equipment. Blades for agricultural rotary mowers. Requirements
EN 12697-31:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor
EN ISO 9873:2017 Dentistry - Intra-oral mirrors (ISO 9873:2017)
I.S. EN 10088-4:2009 STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
I.S. EN 10083-3:2006 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
ISO 4960:2007 Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %
ISO 9448-6:2013 Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1
I.S. EN 14399-9:2009 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
EN ISO 17078-2:2007/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS
ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
EN ISO 13533:2001/AC:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT
EN ISO 17078-1:2004/A1:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress
DIN EN 14399-1:2015-04 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 9173-1 E : 2017 DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016)
DIN EN 957-1:2005-11 STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 10083-1 E : 2006 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
CSA B51 : 2014 BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
DIN EN ISO 9173-1:2015-02 (Draft) DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016)
BS EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes
BS EN ISO 6508-2:2015 Metallic materials. Rockwell hardness test Verification and calibration of testing machines and indenters
EN 1097-2:2010 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
BS EN 10208-1:2009 Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class A
BS EN 10088-2:2014 Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
DIN EN 12504-2:2012-12 Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number
ISO 13628-10:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe
BS EN ISO 6508-3:2015 Metallic materials. Rockwell hardness test Calibration of reference blocks
BS EN 843-4:2005 Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Vickers, Knoop and Rockwell superficial hardness
BS EN ISO 13533:2002 Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment
BS EN ISO 18265:2013 Metallic materials. Conversion of hardness values
BS EN ISO 13625:2002 Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings
BS EN 62271-202:2014 High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation
BS EN ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread
DIN EN 14772:2005-04 Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
EN 10084:2008 Case hardening steels - Technical delivery conditions
ONORM ISO 7331 : 2012 SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS (ISO 7331:2011)
DIN EN 15311:2007-06 THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS
DIN EN ISO 9173-1:2017-03 DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016)
DIN EN ISO 9873:2000-07 DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017)
CEN/TS 16700:2014 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of resistance to impact of a coating on a wooden substrate
EN 10208-2:2009 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
DIN EN 15638:2009-07 ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 17078-1:2005 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
EN 10089:2002 Hot-rolled steels for quenched and tempered springs - Technical delivery conditions
EN ISO 12690:2010 Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010)
DIN EN 843-4:2005-08 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness
DIN ISO 10071-1:2010-11 Tools for pressing - Ball-lock punches - Part 1: Ball-lock punches for light duty (ISO 10071-1:2008)
I.S. EN ISO 13533:2002 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT
DIN EN ISO 898-2:2012-08 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)
ONORM EN 16451 : 2015 RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
OVE/ONORM EN 62271-202 : 2015 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014)
ONORM EN ISO 683-17 : 2015 HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014)

ISO 6508-3:2015 Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks
ISO 6508-2:2015 Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
AS/NZS ISO 8124.1:2019 Safety of toys Safety aspects related to mechanical and physical properties
ISO 3738-1:1982 Hardmetals — Rockwell hardness test (scale A) — Part 1: Test method
ISO 18265:2013 Metallic materials — Conversion of hardness values
ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
ISO 4498:2010 Sintered metal materials, excluding hardmetals Determination of apparent hardness and microhardness

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.