• There are no items in your cart

ISO 6892-1:2016

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Metallic materials Tensile testing Part 1: Method of test at room temperature
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

11-15-2019

Language(s)

French, English

Published date

06-27-2016

ISO 6892-1:2016 specifies the method for tensile testing of metallic materials and defines the mechanical properties which can be determined at room temperature.

NOTE Annex A contains further recommendations for computer controlled testing machines.

DevelopmentNote
Supersedes ISO 6892. (08/2009) Supersedes ISO/DIS 6892-1. (06/2016)
DocumentType
Standard
Pages
78
ProductNote
THIS STANDARD ALSO REFERS TO NIS 80 : 1994, NIS 3003 : 1995, CWA 15261-2 : 2005
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

I.S. EN ISO 15630-3:2010 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
BS ISO 2408:2017 Steel wire ropes. Requirements
11/30239491 DC : 0 BS EN 10149-1 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS
BS EN 61788-6:2011 Superconductivity Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors
UNE-EN 14811:2007 Railway applications - Track - Special purpose rail - Grooved and associated construction
DIN EN ISO 15156-3:2015-12 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015)
CEI EN 62047-9 : 2012 SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 9: WAFER TO WAFER BONDING STRENGTH MEASUREMENT FOR MEMS
BS ISO 9364:2017 Steel sheet, 55 % aluminium-zinc alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities
BS ISO 8535-1:2016 Diesel engines. Steel tubes for high-pressure fuel injection pipes Requirements for seamless cold-drawn single-wall tubes
DIN EN ISO 21672-1:2012-07 Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012)
I.S. EN ISO 11118:2015&LC:2015-12 GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015)
17/30352962 DC : 0 BS EN ISO 15630-1 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE
15/30316712 DC : 0 BS ISO 27306 - METALLIC MATERIALS - METHOD OF CONSTRAINT LOSS CORRECTION OF CTOD FRACTURE TOUGHNESS FOR FRACTURE ASSESSMENT OF STEEL COMPONENTS
DIN EN 10152:2009-07 ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS EN 14509:2013 Self-supporting double skin metal faced insulating panels. Factory made products. Specifications
17/30355209 DC : 0 BS EN ISO 18592 - RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - METHOD FOR THE FATIGUE TESTING OF MULTI-SPOT-WELDED SPECIMENS
13/30216084 DC : 0 BS ISO 7441 - CORROSION OF METALS AND ALLOYS - DETERMINATION OF BIMETALLIC CORROSION IN OUTDOOR EXPOSURE CORROSION TESTS
ONORM EN ISO 26203-1 : 2010 METALLIC MATERIALS - TENSILE TESTING AT HIGH STRAIN RATES - PART 1: ELASTIC-BAR-TYPE SYSTEMS
BS ISO 5832-1:2007 Implants for surgery. Metallic materials Wrought stainless steel
DIN EN 10338:2015-10 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
16/30258478 DC : 0 BS EN 13674-2 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
ISO 7500-1:2018 Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
ISO 404:2013 Steel and steel products — General technical delivery requirements
14/30248087 DC : 0 BS ISO 11950 - COLD-REDUCED ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL
BS EN 10294-2:2012 Hollow bars for machining. Technical delivery conditions Stainless steels with specified machinability properties
15/30287641 DC : 0 BS EN ISO 16120-1 - NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS
12/30258618 DC : 0 BS ISO 5951 - HOT-ROLLED STEEL SHEET OF HIGHER YIELD STRENGTH WITH IMPROVED FORMABILITY
BS ISO 4991:2015 Steel castings for pressure purposes
API 6DSS : 2017-08 SPECIFICATION FOR SUBSEA PIPELINE VALVES
DIN EN ISO 26203-1:2010-06 METALLIC MATERIALS - TENSILE TESTING AT HIGH STRAIN RATES - PART 1: ELASTIC-BAR-TYPE SYSTEMS
ISO 11949:2016 Cold-reduced tinmill products Electrolytic tinplate
ASTM F 1295 : 2016 : REDLINE Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)
17/30357660 DC : DRAFT AUG 2017 BS ISO 4960 - STEEL STRIP, COLD-REDUCED WITH A MASS FRACTION OF CARBON OVER 0,25%
12/30250149 DC : 0 BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS
17/30346738 DC : 0 BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS
PREN 12493 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
12/30254917 DC : DRAFT JAN 2012 BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
15/30312510 DC : 0 BS ISO 13976 - HOT-ROLLED STEEL SHEET IN COILS OF STRUCTURAL QUALITY AND HEAVY THICKNESS
DIN EN ISO 11118:2016-03 GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS
13/30290101 DC : 0 BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
17/30312468 DC : 0 BS ISO 15461 - STEEL FORGINGS - TESTING FREQUENCY, SAMPLING CONDITIONS AND TEST METHODS FOR MECHANICAL TESTS
PREN 1442 : DRAFT 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
13/30263803 DC : 0 BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING
CSA B625 : 2013 PORTABLE TANKS FOR THE TRANSPORT OF DANGEROUS GOODS
17/30363845 DC : 0 BS ISO 21927-3 - SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS
PREN 10207 : DRAFT 2015 STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS
EN ISO 15630-1:2010 Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO 15630-1:2010)
PREN 598 : DRAFT 2017 COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS
16/30338590 DC : 0 BS EN 10164 - STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS
DIN EN 12449:2015-11 (Draft) COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
12/30258891 DC : 0 BS ISO 5002 - HOT-ROLLED AND COLD-REDUCED ELECTROLYTIC ZINC-COATED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES
UNI EN 13749 : 2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - METHODS OF SPECIFYING THE STRUCTURAL REQUIREMENTS OF BOGIES FRAMES
BS EN ISO 21672-1:2012 Dentistry. Periodontal probes General requirements
12/30257641 DC : 0 BS ISO 7778 - THROUGH-THICKNESS CHARACTERISTICS FOR STEEL PRODUCTS
13/30280536 DC : 0 BS ISO 4998 - CONTINUOUS HOT-DIP ZINC-COATED CARBON STEEL SHEET OF STRUCTURAL QUALITY
UNI EN 4700-006 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
15/30310217 DC : 0 BS ISO 5832-1 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 1: WROUGHT STAINLESS STEEL
ONORM EN ISO 15630-2 : 2011 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC
16/30332611 DC : DRAFT JAN 2016 BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL
11/30239473 DC : 0 BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 10149-1:2013-12 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
13/30279057 DC : 0 BS ISO 683-4 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 4: FREE-CUTTING STEELS
NF EN ISO 26203-1 : 2010 METALLIC MATERIALS - TENSILE TESTING METHOD AT HIGH STRAIN RATES - PART 1: ELASTIC-BAR-TYPE SYSTEMS
BS ISO 15177:2012 Hot-rolled twin-roll cast carbon steel sheet of commercial quality
BS ISO 20032:2013 Method for evaluation of tensile properties of metallic superplastic materials
DIN EN 14509:2013-12 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
CEI EN 50149 : 2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - COPPER AND COPPER ALLOY GROOVED CONTACT WIRES
15/30325000 DC : 0 BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES
UNI EN 13600 : 2013 COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES
14/30301152 DC : 0 BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
BS EN 15566:2016 Railway applications. Railway rolling stock. Draw gear and screw coupling
11/30251682 DC : 0 BS EN 1977 - COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD)
BS ISO 14737:2015 Carbon and low alloy cast steels for general applications
12/30262118 DC BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
BS EN 16124:2011 Founding. Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications
UNI EN ISO 15630-3 : 2010 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
17/30357663 DC : 0 BS ISO 5000 - STEEL SHEET, ALUMINIUM-SILICON ALLOY-COATED BY THE CONTINUOUS HOT-DIP PROCESS, OF COMMERCIAL AND DRAWING QUALITIES
12/30258463 DC : 0 BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
11/30254168 DC : 0 BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
BS EN 4700-005:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock
11/30191086 DC : 0 BS ISO 12633-1 - HOT-FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
10/30201497 DC : 0 BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
PREN 14811 : DRAFT 2016 RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GRVED AND ASSOCIATED CONSTRUCTION
I.S. EN ISO 898-2:2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012)
15/30316161 DC : 0 BS ISO 6931-1 - STAINLESS STEELS FOR SPRINGS - PART 1: WIRE
BS EN ISO 7866:2012 Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing
PREN 12392 : DRAFT 2014 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
BS EN 1562:2012 Founding. Malleable cast irons
PD CEN/TS 17010:2016 Nanotechnologies. Guidance on measurands for characterising nano-objects and materials that contain them
14/30287983 DC : 0 BS ISO 4997 - COLD-REDUCED CARBON STEEL SHEET OF STRUCTURAL QUALITY
12/30251283 DC : 0 BS ISO 9809-4 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: STAINLESS STEEL CYLINDERS WITH AN R[M] VALUE OF LESS THAN 1100 MPA
I.S. EN ISO 5832-3:2016 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 3: WROUGHT TITANIUM 6-ALUMINIUM 4-VANADIUM ALLOY (ISO 5832-3:2016)
13/30256266 DC : 0 BS ISO 683-18 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 18: BRIGHT STEEL PRODUCTS
BS ISO 5832-7:2016 Implants for surgery. Metallic materials Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy
UNE-EN ISO/ASTM 52921:2017 Standard terminology for additive manufacturing - Coordinate systems and test methodologies (ISO/ASTM 52921:2013)
PREN 10225-4 : DRAFT 2017 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS
UNI EN 13601 : 2013 COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
PREN 2576 : 200P2 AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION
I.S. EN 15827:2011 RAILWAY APPLICATIONS - REQUIREMENTS FOR BOGIES AND RUNNING GEARS
UNI EN 4800-006 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
API 6A CHINESE : 2011 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
UNI EN 13605 : 2013 COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES
CEI EN 50288-1 : 2014 MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION
DIN EN 14353 E : 2017 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN ISO 12004-2:2009-02 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008)
UNE-EN ISO 5755:2013 Sintered metal materials - Specifications (ISO 5755:2012)
API 5L CHINESE : 2012 SPECIFICATION FOR LINE PIPE
I.S. EN 14638-3:2010 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
PREN ISO 15614-13 : DRAFT 2010 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING
PREN 14140 : DRAFT 2012 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
ISO 8168:2016 Aerospace — Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1 100 MPa — Procurement specification
PREN 10120 : DRAFT 2014 STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
BS EN 14353 : 2007 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN ISO 21672-1:2012 DENTISTRY - PERIODONTAL PROBES - PART 1: GENERAL REQUIREMENTS (ISO 21672-1:2012)
I.S. EN 1563:2011 FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
API 5C6 : 2006 : R2012 PIPE WITH WELDED CONNECTORS
API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
UNE-EN 14985:2012 Cranes - Slewing jib cranes
I.S. EN ISO 9809-2:2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
PREN 1977 : DRAFT 2011 COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD)
PREN 10028-1 : DRAFT 2014 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
ISO 11951:2016 Cold-reduced tinmill products Blackplate
I.S. EN ISO 17078-4:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT
ISO 606:2015 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
BS EN ISO 18592:2009 Resistance welding. Destructive testing of welds. Method for the fatigue testing of multispot- welded specimens
ASTM F 1058 : 2016 : REDLINE Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008)
I.S. EN 12493:2013 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
ISO 9725:2017 Nickel and nickel alloy forgings
17/30359541 DC : 0 BS EN 12797 - BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS
DIN EN ISO 15630-2:2011-02 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC
15/30322070 DC : 0 BS EN 1563 - FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
ISO 13583-1:2015 Centrifugally cast steel and alloy products — Part 1: General testing and tolerances
UNE-EN 15048-2:2017 Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
EN ISO 3183:2012/A1:2018 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
PD CEN/TR 14585-3:2017 Corrugated metal hose assemblies for pressure applications Design method
I.S. EN 4700-007:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
NF EN ISO 15630-3 : 2010 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEELS
16/30332605 DC : 0 BS EN 10210-1 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL
ISO 16220:2017 Magnesium and magnesium alloys — Magnesium alloy ingots and castings
17/30244737 DC : 0 BS EN 17149 - RAILWAY APPLICATIONS - FATIGUE STRENGTH ASSESSMENT OF RAILWAY VEHICLE STRUCTURES BASED ON CUMULATIVE DAMAGE
UNI EN ISO 15630-1 : 2010 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE
ASTM F 3213 : 2017 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
UNI EN ISO 11960 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
EN 755-2:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
I.S. EN 10216-2:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN 12167:2016 COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES
EN 545:2010 Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
EN 10222-1:2017 Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
BS EN 13480-8:2017 Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping
BS EN 13480-8:2017+A1:2019 Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping
BS EN 10216-2:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties
DIN EN 13605:2013-09 Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
DIN EN 13599:2014-12 COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES
DIN EN ISO 15156-2:2015-12 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015)
DIN EN 12732:2014-07 Gas infrastructure - Welding steel pipework - Functional requirements (includes Amendment A1:2014)
DIN EN 1982:2016-01 (Draft) COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS
DIN EN 1396:2015-06 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
DIN EN ISO 11120:2015-05 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING (ISO 11120:2015)
DIN EN 13602:2013-09 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors
DIN EN 13604:2013-09 Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper
DIN EN 14359 E : 2017 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
BS EN 13600:2013 Copper and copper alloys. Seamless copper tubes for electrical purposes
UNE-EN ISO 898-1:2015 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
UNE-EN ISO 17641-2:2016 Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17641-2:2015)
BS EN 12101-3:2015 Smoke and heat control systems Specification for powered smoke and heat control ventilators (Fans)
BS EN 13835:2012 Founding. Austenitic cast irons
BS EN ISO 11970:2016 Specification and qualification of welding procedures for production welding of steel castings
BS EN ISO 9018:2015 Destructive tests on welds in metallic materials. Tensile test on cruciform and lapped joints
UNE-EN 10272:2016 Stainless steel bars for pressure purposes
UNE-EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
BS EN ISO 22674:2016 Dentistry. Metallic materials for fixed and removable restorations and appliances
BS EN 754-1:2016 Aluminium and aluminium alloys. Cold drawn rod/bar and tube Technical conditions for inspection and delivery
BS EN 13348:2016 Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum
BS EN 10305-2:2016 Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes
BS EN ISO 11960:2014 Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
DIN EN 14893:2014-09 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
BS EN 10205:2016 Cold reduced tinmill products. Blackplate
I.S. EN 14276-1:2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
BS EN 10272:2007 Stainless steel bars for pressure purposes
UNE-EN 10314:2016 Method for the derivation of minimum values of proof strength of steel at elevated temperatures
DIN EN 10305-1:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
BS EN ISO 17641-2:2015 Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processes Self-restraint tests
BS EN 1559-1:2011 Founding. Technical conditions of delivery General
BS EN 755-2:2016 Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Mechanical properties
I.S. EN 13601:2013 COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
DIN EN 1562:2012-05 FOUNDING - MALLEABLE CAST IRONS
I.S. EN 10305-2:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
I.S. EN 13148:2010 COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP
I.S. EN 10216-4:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
I.S. EN 10120:2017 STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
I.S. EN 10222-1:2017 STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS FOR OPEN DIE FORGINGS
DIN EN 14195:2015-03 METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 10149-1:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
EN 13230-3:2016 Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers
EN 62561-2:2012 Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes
EN 12101-3:2015 Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
EN 10263-1:2017 Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
EN 10305-3:2016 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
EN 12952-2:2011 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
EN ISO 15614-13:2012 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012)
EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
EN 10314:2016 Method for the derivation of minimum values of proof strength of steel at elevated temperatures
CEN/TS 15718:2011 Railway applications - Wheelsets and bogies - Product requirements for cast wheels
EN 10209:2013 Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions
EN ISO 16120-1:2017 NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017)
EN 12952-5:2011 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
EN 10216-1:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN 12166:2016 Copper and copper alloys - Wire for general purposes
EN 10270-1:2011+A1:2017 Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire
EN 61788-18:2013 Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
EN 10268:2006+A1:2013 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10088-3:2014 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10270-2:2011 Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire
EN 10120:2017 Steel sheet and strip for welded gas cylinders
EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 10305-5:2016 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
EN 10272:2016 Stainless steel bars for pressure purposes
CEN/TS 17010:2016 Nanotechnologies - Guidance on measurands for characterising nano-objects and materials that contain them
EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
EN 10305-2:2016 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
EN ISO 11439:2013 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013)
EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
EN 12735-2:2016 Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
DIN EN 10205:2017-03 COLD REDUCED TINMILL PRODUCTS - BLACKPLATE
UNI EN 12732 : 2014 GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
EN 10205:2016 Cold reduced tinmill products - Blackplate
EN 10207:2017 Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
ONORM EN 14917 : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
EN 13348:2016 Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum
EN 12451:2012 Copper and copper alloys - Seamless, round tubes for heat exchangers
EN 13110:2012+A1:2017 LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
EN 50288-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification
EN 50149:2012 Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires
EN 10028-1:2017 Flat products made of steels for pressure purposes - Part 1: General requirements
EN 12392:2016 Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
DIN EN 15551:2011-01 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
ONORM EN ISO 898-2 : 2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012)
ONORM EN ISO 5755 : 2013 SINTERED METAL MATERIALS - SPECIFICATIONS (ISO 5755:2012)
ONORM EN 15001-1 : 2011 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
ONORM EN 10209 : 2013 COLD-ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS
ONORM EN 1396 : 2015 ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS
ISO 11950:2016 Cold-reduced tinmill products Electrolytic chromium/chromium oxide-coated steel
ISO 17440:2014 Cranes General design Limit states and proof of competence of forged steel hooks
EN 13600:2013 Copper and copper alloys - Seamless copper tubes for electrical purposes
ISO 6363-2:2012 Wrought aluminium and aluminium alloys — Cold-drawn rods/bars and tubes and wires — Part 2: Mechanical properties
DIN EN ISO 26203-2:2012-01 Metallic materials - Tensile testing at high strain rates - Part 2: Servo-hydraulic and other test systems (ISO 26203-2:2011)
UNI EN 16482 : 2014 FOUNDING - CONTINUOUS CAST IRON BARS
BS ISO 15208:2012 Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality
DIN EN ISO 5832-3:2015-06 (Draft) IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 3: WROUGHT TITANIUM 6-ALUMINIUM 4-VANADIUM ALLOY (ISO 5832-3:2016)
S.R. CEN/TS 17010:2016 NANOTECHNOLOGIES - GUIDANCE ON MEASURANDS FOR CHARACTERISING NANO-OBJECTS AND MATERIALS THAT CONTAIN THEM
11/30191093 DC : 0 BS ISO 10799-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
BS EN 16451:2015 Railway applications. Braking. Brake pad holder
BS EN 61788-19:2014 Superconductivity Mechanical properties measurement. Room temperature tensile test of reacted Nb<sub>3</sub>Sn composite superconductors
BS ISO 25217:2009 Adhesives. Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens
14/30291911 DC : 0 BS ISO 6362-2 - WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED RODS/BARS, TUBES AND PROFILES - PART 2: MECHANICAL PROPERTIES
PREN 10303 : DRAFT 2013 THIN MAGNETIC STEEL SHEET AND STRIP FOR USE AT MEDIUM FREQUENCIES
DIN EN ISO 6892-2:2011-05 METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE
BS EN ISO 9809-1:2010 Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength less than 1100 MPa
BS ISO 6892-4:2015 Metallic materials. Tensile testing Method of test in liquid helium
API 11D2 : 2010 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS
11/30230618 DC : 0 BS ISO 683-2 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 2: ALLOY STEELS FOR QUENCHING AND TEMPERING
BS EN 4700-006:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings
13/30266550 DC : 0 BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
BS EN 50525-2-11:2011 Electric cables. Low voltage energy cables of rated voltages up to and including 450/750V (U0/U) Cables for general applications. Flexible cables with thermoplastic PVC insulation
DIN EN ISO 22068 E : 2014 SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012)
EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
PD CEN/TR 16748:2014 Aluminium and aluminium alloys. Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting
UNI EN ISO 9809-3 : 2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
13/30280395 DC : 0 BS EN 10346 - CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
BS ISO 14788:2017 Steel sheet, zinc-5 % aluminium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities
BS ISO 4999:2014 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
BS EN ISO 26203-2:2011 Metallic materials. Tensile testing at high strain rates Servo-hydraulic and other test systems
DIN EN 16451:2015-09 RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
API 9A : 2011 : INC : ERR 1 : 2012 : R2016 SPECIFICATION FOR WIRE ROPE
14/30300966 DC : 0 BS EN 1442 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
DIN EN ISO 9693-1:2012-06 DENTISTRY - COMPATIBILITY TESTING - PART 1: METAL-CERAMIC SYSTEMS (ISO 9693-1:2012)
12/30270633 DC : 0 BS EN 10222-1 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
13/30252100 DC : 0 BS ISO 4990 - STEEL CASTINGS - GENERAL TECHNICAL DELIVERY REQUIREMENTS
12/30258888 DC : 0 BS ISO 3573 - HOT-ROLLED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES
BS ISO 22068 : 2012 SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS
17/30334106 DC : 0 BS ISO 13887 - STEEL SHEET, COLD-REDUCED, OF HIGHER YIELD STRENGTH WITH IMPROVED FORMABILITY
17/30339115 DC : 0 ISO/DIS 4978 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
11/30239494 DC : 0 BS EN 10149-2 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS
DIN EN 10294-2 E : 2012 HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES
ISO 5832-2:2018 Implants for surgery — Metallic materials — Part 2: Unalloyed titanium
ISO 3574:2012 Cold-reduced carbon steel sheet of commercial and drawing qualities
09/30209028 DC : 0 BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
17/30342659 DC : 0 BS ISO 21635 - SHIPS AND MARINE TECHNOLOGY - SPECIFICATION OF HIGH MANGANESE AUSTENITIC STEEL USED FOR LNG TANKS ON BOARD SHIPS
DIN EN ISO 4136:2013-02 Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
DIN EN 16482:2014-09 FOUNDING - CONTINUOUS CAST IRON BARS
17/30334103 DC : 0 BS ISO 9364 - CONTINUOUS HOT-DIP 55% ALUMINIUM/ZINC ALLOY-COATED STEEL SHEET OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES
11/30253751 DC : 0 BS EN 10269 - STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
BS ISO 5838-1:2013 Implants for surgery. Metallic skeletal pins and wires General requirements
15/30248084 DC : 0 BS ISO 11949 - COLD-REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE
PREN 10219-1 : DRAFT 2016 COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL
DIN EN 15551:2013-05 (Draft) RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
PREN 755-2 : DRAFT 2015 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES
UNI EN ISO 9809-1 : 2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
NF EN ISO 9809-1 : 2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
EN 4700-002:2016 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section
BS EN 14811 : 2006 RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION
12/30255914 DC : 0 BS ISO 5950 - ELECTROLYTIC TIN-COATED COLD-REDUCED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES
ONORM EN 15512 : 2010 STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN
17/30368523 DC : 0 BS ISO 13782 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - UNALLOYED TANTALUM FOR SURGICAL IMPLANT APPLICATIONS
UNI EN 10217-7 : 2014 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
S.R. CEN/TS 15718:2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS
15/30331537 DC : 0 BS EN 10207 - STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS
BS EN 16019:2014 Railway applications. Automatic coupler. Performance requirements, specific interface geometry and test method
17/30337809 DC : DRAFT JAN 2017 BS EN 15512 - STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN
10/30207746 DC : 0 BS ISO 20805 - HOT-ROLLED STEEL SHEET IN COILS OF HIGHER YIELD STRENGTH WITH IMPROVED FORMABILITY AND HEAVY THICKNESS FOR COLD FORMING
11/30251991 DC : 0 BS EN 14195 - METAL FRAMING COMPONENTS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
13/30252112 DC : 0 BS EN ISO 11970 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR PRODUCTION WELDING OF STEEL CASTINGS
17/30354713 DC : 0 BS ISO 19642-8 - ROAD VEHICLES - AUTOMOTIVE CABLES - PART 4: DIMENSIONS AND REQUIREMENTS FOR 30 V A.C. AND 60 V D.C. SINGLE CORE ALUMINIUM CONDUCTOR CABLES
DIN EN ISO 9809-3:2010-10 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
PREN 10253-4 : DRAFT 2017 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
11/30212226 DC : 0 BS ISO 21672-1 - DENTISTRY - PERIODONTAL PROBES - PART 1: GENERAL REQUIREMENTS
BS ISO 18762:2016 Tubes of titanium and titanium alloys. Welded tubes for condensers and heat exchangers. Technical delivery conditions
PREN 10164 : DRAFT 2016 STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS
ISO 15461:2018 Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests
PREN 10088-2 : DRAFT 2011 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNI EN 4800-004 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE
UNI EN 14592 : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
BS EN 50525-2-83:2011 Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Multicore cables with crosslinked silicone rubber insulation
BS EN ISO 6892-3:2015 Metallic materials. Tensile testing Method of test at low temperature
UNI EN ISO 4136 : 2012 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TRANSVERSE TENSILE TEST
BS ISO 12891-2:2014 Retrieval and analysis of surgical implants Analysis of retrieved surgical implants
DIN EN 16019:2014-06 RAILWAY APPLICATIONS - AUTOMATIC COUPLER - PERFORMANCE REQUIREMENTS, SPECIFIC INTERFACE GEOMETRY AND TEST METHOD
15/30310220 DC : 0 BS ISO 5832-3 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 3: WROUGHT TITANIUM 6-ALUMINIUM 4-VANADIUM ALLOY
BS EN 62047-9:2011 Semiconductor devices. Micro-electromechanical devices Wafer to wafer bonding strength measurement for MEMS
17/30357669 DC : 0 BS ISO 16172 - STEEL SHEET, METALLIC-COATED BY THE CONTINUOUS HOT-DIP PROCESS FOR CORRUGATED STEEL PIPE
UNE-EN 13480-8:2017 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2019.)
BS ISO 404:2013 Steel and steel products. General technical delivery requirements
BS EN 10338:2015 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming. Technical delivery conditions
DIN EN ISO 7866:2013-01 Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012)
BS EN 15551:2017 Railway applications. Railway rolling stock. Buffers
UNI EN 4800-005 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
11/30239433 DC : 0 BS EN 12449 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
DD CEN/TS 15718:2011 Railway applications. Wheelsets and bogies. Product requirements for cast wheels
ASTM F 3302 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion
BS EN 13749:2011 Railway applications. Wheelsets and bogies. Method of specifying the structural requirements of bogie frames
I.S. EN 13445-2:2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
12/30250146 DC : 0 BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS
I.S. EN 4800-006:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
BS ISO 5950:2012 Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
ISO 5838-1:2013 Implants for surgery Metallic skeletal pins and wires Part 1: General requirements
CEI EN 62561-2 : 2013 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES
I.S. EN 62561-2:2012 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES (IEC 62561-2:2012 (MOD))
API 9A : 2011 : INC : ERR 1 : 2012 SPECIFICATION FOR WIRE ROPE
ONORM EN 13600 : 2013 COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES
PREN 10210-1 : DRAFT 2016 HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL
DIN EN 14893 E : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
ISO 13976:2016 Hot-rolled steel sheet in coils of structural quality and heavy thickness
DIN EN 14592 E : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
PREN 764-4 : DRAFT 2012 PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
I.S. EN ISO 9809-3:2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
I.S. EN 16914:2017 ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS
API SPEC 9A : 2011 SPECIFICATION FOR WIRE ROPE
BS ISO 5952:2011 Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
ISO 9364:2017 Steel sheet, 55 % aluminium-zinc alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities
ISO 14590:2016 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
PREN 10149-2 : DRAFT 2011 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS
BS EN 14592 : 2008 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
I.S. EN ISO/ASTM 52921:2016 STANDARD TERMINOLOGY FOR ADDITIVE MANUFACTURING - COORDINATE SYSTEMS AND TEST METHODOLOGIES (ISO/ASTM 52921:2013)
I.S. EN 754-1:2016 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
PREN 131-2 : DRAFT 2009 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
ISO 1083:2004 Spheroidal graphite cast irons - Classification
I.S. EN 12449:2016 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
I.S. EN 16124:2011 FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS
I.S. EN 4800-002:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
ISO/TS 35105:2018 Petroleum and natural gas industries Arctic operations Material requirements for arctic operations
UNE 27700:2013 Systems and equipments to improve the stability and floatability reserve of vessels and floating structrures by inflatable means, in case of water ingress or excessive listing. Requirements and test methods for the flotation modules.
ISO 3573:2012 Hot-rolled carbon steel sheet of commercial and drawing qualities
BS EN 13445-2 : 2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
ISO 683-1:2016 Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering
ISO 6361-1:2011 Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery
UNI EN ISO 26203-1 : 2010 METALLIC MATERIALS - TENSILE TESTING AT HIGH STRAIN RATES - PART 1: ELASTIC-BAR-TYPE SYSTEMS
ISO 26203-1:2018 Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
PREN 10272 : DRAFT 2013 STAINLESS STEEL BARS FOR PRESSURE PURPOSES
EN ISO 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018)
PREN 12797 : DRAFT 2017 BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS
ISO 3183:2012 Petroleum and natural gas industries Steel pipe for pipeline transportation systems
BS ISO 13887:2017 Steel sheet, cold-reduced, of higher yield strength with improved formability
BS EN 12449:2016 Copper and copper alloys. Seamless, round tubes for general purposes
BS ISO 11513:2011 Gas cylinders. Refillable welded steel cylinders containing materials for subatmospheric gas packaging (excluding acetylene). Design, construction, testing, use and periodic inspection
I.S. EN 10207:2017 STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS
UNE-EN ISO 11970:2016 Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016)
ISO 11119-2:2012 Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
UNI EN 1563 : 2012 FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
DIN EN ISO 15630-2 E : 2011 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC
EN 1563:2011 Founding - Spheroidal graphite cast irons
NF EN ISO 6892-2 : 2011 METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE
CEI EN 61788-18 : 2014 SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS
ASTM F 3056 : 2014 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
ASTM F 2924 : 2014 : REDLINE Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion
UNI EN 16124 : 2012 FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS
ASTM F 3056 : 2014 : EDT 1 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
ASTM F 3273 : 2017 Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700)
UNE-EN ISO 9693-1:2012 Dentistry - Compatibility testing - Part 1: Metal-ceramic systems (ISO 9693-1:2012)
UNI EN 4700-007 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
I.S. EN 4700-006:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
S.R. CEN/TR 16748:2014 ALUMINIUM AND ALUMINIUM ALLOYS - MECHANICAL POTENTIAL OF AL-SI ALLOYS FOR HIGH PRESSURE, LOW PRESSURE AND GRAVITY DIE CASTING
ASTM F 3055 : 2014 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
DIN EN ISO 7500-1:2016-05 METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM (ISO 7500-1:2015)
DIN EN ISO 15630-1:2011-02 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE
ISO 7778:2014 Through-thickness characteristics for steel products
ASTM F 3055 : 2014 : EDT 1 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
EN 485-2:2016 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES
I.S. EN 14811:2006 RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION
EN 12164:2016 Copper and copper alloys - Rod for free machining purposes
IEC 62917:2016 Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires
ISO 4998:2014 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality
I.S. EN 50149:2012 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - COPPER AND COPPER ALLOY GROOVED CONTACT WIRES
DIN EN 10216-5:2014-03 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
I.S. EN 1562:2012 FOUNDING - MALLEABLE CAST IRONS
EN 1982:2017 Copper and copper alloys - Ingots and castings
ISO 14737:2015 Carbon and low alloy cast steels for general applications
EN 12168:2016 Copper and copper alloys - Hollow rod for free machining purposes
DIN EN 755-2:2016-10 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES
DIN EN 755-1:2016-10 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN ISO 15614-13:2012-10 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012)
DIN EN ISO 7441:2015-04 CORROSION OF METALS AND ALLOYS - DETERMINATION OF BIMETALLIC CORROSION IN ATMOSPHERIC EXPOSURE CORROSION TESTS (ISO 7441:2015)
DIN EN ISO 9018 E : 2016 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TENSILE TEST ON CRUCIFORM AND LAPPED JOINTS (ISO 9018:2015)
DIN EN 1520:2011-06 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
DIN EN 12842:2012-11 Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
DIN EN 1442:2008-04 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
DIN EN ISO 22674:2016-09 Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016)
DIN EN 12101-3:2015-12 SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS)
DIN EN ISO 17641-2 E : 2016 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HOT CRACKING TESTS FOR WELDMENTS - ARC WELDING PROCESSES - PART 2: SELFRESTRAINT TESTS (ISO 176412:2015)
DIN EN 1594:2013-12 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
DIN EN 1559-1:2011-05 Founding - Technical conditions of delivery - Part 1: General
DIN EN 10305-4 E : 2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
DIN EN 10305-6:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
UNE-EN 10120:2018 Steel sheet and strip for welded gas cylinders
DIN EN ISO 898-1:2013-05 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
DIN EN 12167:2015-12 (Draft) COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES
DIN EN 12168:2015-12 (Draft) COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES
DIN EN ISO 7711-2:2011-10 Dentistry - Rotary diamond instruments - Part 2: Discs (ISO 7711-2:2011)
DIN EN 10269:2014-02 STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
DIN EN 10216-2:2014-03 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
DIN EN 12164:2015-12 (Draft) COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES
DIN EN 12163:2015-12 (Draft) COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES
DIN EN 14359:2011-04 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
BS EN 12450:2012 Copper and copper alloys. Seamless, round copper capillary tubes
BS EN 10216-4:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties
BS EN ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs
BS EN 14195:2014 Metal framing components for gypsum board systems. Definitions, requirements and test methods
UNE-EN 50288-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification
UNE-EN 10305-1:2016 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
UNE-EN 10305-5:2016 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
BS EN 12163:2011 Copper and copper alloys. Rod for general purposes
UNE-EN 1977:2013 Copper and copper alloys - Copper drawing stock (wire rod)
UNE-EN 12101-3:2016 Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
BS EN 754-2:2016 Aluminium and aluminium alloys. Cold drawn rod/bar and tube Mechanical properties
DIN EN 10305-3:2016-08 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
UNE-EN 545:2011 Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
ISO 11960:2014 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
ISO 18265:2013 Metallic materials — Conversion of hardness values
BS EN 1172:2011 Copper and copper alloys. Sheet and strip for building purposes
BS EN 10270-1 : 2011 STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE
UNE-EN 754-2:2017 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties
ISO 5832-3:2016 Implants for surgery Metallic materials Part 3: Wrought titanium 6-aluminium 4-vanadium alloy
ONORM EN 10216-2 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
UNE-EN ISO 11120:2015 Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015)
BS EN 13148:2010 Copper and copper alloys. Hot-dip tinned strip
UNE-EN 10139:2016 Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
UNE-EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
ONORM EN 1706 : 2013 ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES
ONORM EN 13094 : 2015 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION
DIN EN 10270-2:2012-01 Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire
I.S. EN 10216-3:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
DIN EN 1559-2:2014-12 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
ONORM EN 12493 : 2015 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
I.S. EN 12450:2012 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES
I.S. EN 10305-5:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES
I.S. EN 10216-1:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
I.S. EN 485-1:2016 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
I.S. EN 13600:2013 COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES
I.S. EN ISO 11120:2015 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING (ISO 11120:2015)
EN ISO 15841:2014 Dentistry - Wires for use in orthodontics (ISO 15841:2014)
I.S. EN 10305-6:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
I.S. EN 10273:2016 HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
I.S. EN 1594:2013 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
I.S. EN 10314:2016 METHOD FOR THE DERIVATION OF MINIMUM VALUES OF PROOF STRENGTH OF STEEL AT ELEVATED TEMPERATURES
I.S. EN 12166:2016 COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES
I.S. EN 12842:2012 DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
DIN EN 13148:2010-12 Copper and copper alloys - Hot-dip tinned strip
ONORM EN 13262 : 2012 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
DIN EN 12450:2013-01 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES
I.S. EN 131-2:2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
I.S. EN 10152:2017 ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN ISO 15136-1:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
I.S. EN 1982:2017 COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS
I.S. EN ISO 15156-2:2015&LC:2015 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015)
DIN EN 12451:2012-08 Copper and copper alloys - Seamless, round tubes for heat exchangers
DIN EN 13674-1:2011-04 RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
DIN EN 13674-1:2017-07 RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
DIN EN 10028-1:2017-10 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
I.S. EN ISO 7441:2015 CORROSION OF METALS AND ALLOYS - DETERMINATION OF BIMETALLIC CORROSION IN ATMOSPHERIC EXPOSURE CORROSION TESTS (ISO 7441:2015)
I.S. EN 10209:2013 COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10270-1:2011 STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE
ONORM EN 13261 : 2012 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
I.S. EN 10216-5:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
I.S. EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN 1172:2012-02 Copper and copper alloys - Sheet and strip for building purposes
EN ISO 7866:2012/AC:2014 GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012/COR 1:2014)
I.S. EN 1520:2011 PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT
I.S. EN 10217-7:2014 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
I.S. EN 13599:2014 COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES
I.S. EN 12167:2016 COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES
I.S. EN 13835:2012 FOUNDING - AUSTENITIC CAST IRONS
I.S. EN 13605:2013 COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES
I.S. EN 1396:2015 ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS
I.S. EN 10303:2015 THIN MAGNETIC STEEL STRIP AND SHEET FOR USE AT MEDIUM FREQUENCIES
I.S. EN ISO 10423:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT
I.S. EN 10205:2016 COLD REDUCED TINMILL PRODUCTS - BLACKPLATE
I.S. EN 1977:2013 COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD)
I.S. EN 12452:2012 COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS
DIN EN 10088-2:2014-12 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
EN ISO 15156-2:2015 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015)
DIN EN 12452:2012-08 COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS
I.S. EN 1172:2011 COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES
I.S. EN ISO 18265:2013 METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013)
I.S. EN 12168:2016 COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES
I.S. EN 14140:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
I.S. EN 1559-1:2011 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
I.S. EN 1442:2017 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
I.S. EN 12732:2013 GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
I.S. EN 10270-2:2011 STEEL WIRE FOR MECHANICAL SPRINGS - PART 2: OIL HARDENED AND TEMPERED SPRING STEEL WIRE
I.S. EN 10270-3:2011 STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE
I.S. EN 12101-3:2015 SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS)
I.S. EN 10149-1:2013 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
I.S. EN 13230-3:2016 RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS
I.S. EN 754-2:2016 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 2: MECHANICAL PROPERTIES
I.S. EN 10269:2013 STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
DIN EN 13110:2017-05 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
I.S. EN 13602:2013 COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS
I.S. EN 12952-2:2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
I.S. EN 1559-2:2014 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2 - ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
I.S. EN 13348:2016 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR MEDICAL GASES OR VACUUM
I.S. EN ISO 11960:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
I.S. EN 12392:2016 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
I.S. EN 15048-2:2016 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE
I.S. EN 10272:2016&LC:2016 STAINLESS STEEL BARS FOR PRESSURE PURPOSES
I.S. EN 1561:2011 FOUNDING - GREY CAST IRONS
I.S. EN ISO 15841:2014 DENTISTRY - WIRES FOR USE IN ORTHODONTICS (ISO 15841:2014)
I.S. EN 13604:2013 COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER
I.S. EN 545:2010 DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
I.S. EN 14195:2014 METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN ISO 9018:2015 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TENSILE TEST ON CRUCIFORM AND LAPPED JOINTS (ISO 9018:2015)
I.S. EN 13480-8:2017&LC:2019 METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING
I.S. EN 14893:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
I.S. EN 10088-3:2014 STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
I.S. EN ISO 17641-2:2015 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HOT CRACKING TESTS FOR WELDMENTS - ARC WELDING PROCESSES - PART 2: SELF-RESTRAINT TESTS (ISO 17641-2:2015)
EN ISO 15156-3:2015 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015)
I.S. EN 12451:2012 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS
DIN EN ISO 11439:2013-09 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013)
I.S. EN 10268:2006 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 12952-5:2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
I.S. EN 10305-4:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
DIN EN ISO 11970:2016-08 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR PRODUCTION WELDING OF STEEL CASTINGS (ISO 11970:2016)
I.S. EN ISO 10451:2010 DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS
I.S. EN 10305-1:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
I.S. EN 10305-3:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES
DIN EN 10088-3:2014-12 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
DIN EN 1977:2013-04 COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD)
I.S. EN ISO 15614-13:2012 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012)
I.S. EN 13674-1:2011 RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
I.S. EN ISO 11970:2016 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR PRODUCTION WELDING OF STEEL CASTINGS (ISO 11970:2016)
I.S. EN 12164:2016 COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES
DIN EN 755-2:1997-08 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES
I.S. EN 764-4:2014 PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
I.S. EN 10028-1:2017 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
I.S. EN 1564:2011 FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS
I.S. EN 12735-2:2016 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 2: TUBES FOR EQUIPMENT
I.S. EN ISO 22674:2016 DENTISTRY - METALLIC MATERIALS FOR FIXED AND REMOVABLE RESTORATIONS AND APPLIANCES (ISO 22674:2016)
I.S. EN 14359:2017 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
I.S. EN ISO 11439:2013 GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES (ISO 11439:2013)
I.S. EN 755-1:2016 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 12732:2000-09 GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
I.S. EN 12163:2016 COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES
DIN EN 12493:2017-01 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
UNI EN 12493 : 2014 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
VDI 3405-2-1 : 2015 COR 2017 ADDITIVE MANUFACTURING PROCESSES, RAPID MANUFACTURING - LASER BEAM MELTING OF METALLIC PARTS; MATERIAL DATA SHEET ALUMINIUM ALLOY ALSI10MG
KTA 3407 : 2014 PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL
ONORM EN ISO 4136 : 2013 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TRANSVERSE TENSILE TEST (ISO 4136:2012)
VDI 2700 Blatt 14:2011-09 Securing of loads on road vehicles - Determination of coefficients of friction
VDI 3405 Blatt 2:2013-08 Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing
UNE-EN 16482:2014 Founding - Continuous cast iron bars
DIN EN 1563:2015-07 (Draft) FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
PREN 10305-5 : DRAFT 2015 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES
API 5L RUSSIAN : 2012 SPECIFICATION FOR LINE PIPE
NF EN ISO 9809-3 : 2011 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
DIN EN ISO 18592:2010-05 RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - METHOD FOR THE FATIGUE TESTING OF MULTI-SPOT-WELDED SPECIMENS
DIN ISO 5832-11:2015-12 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 11: WROUGHT TITANIUM 6-ALUMINIUM 7-NIOBIUM ALLOY (ISO 5832-11:2014)
11/30242619 DC : 0 BS ISO 5001 - COLD-REDUCED CARBON STEEL SHEET FOR VITREOUS ENAMELLING
13/30252133 DC : 0 BS ISO 14737 - CAST NON-ALLOY AND LOW ALLOY STEELS FOR GENERAL APPLICATIONS
DIN EN 15827:2011-06 Railway applications - Requirements for bogies and running gears
I.S. EN 50288-1:2013 MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION
11/30212253 DC : 0 BS ISO 14604 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS OF TEST FOR CERAMIC COATINGS - DETERMINATION OF FRACTURE STRAIN
BS EN 16079:2011 Founding. Compacted (vermicular) graphite cast irons
15/30296029 DC : 0 BS ISO 4955 - HEAT-RESISTANT STEELS
BS EN ISO 15630-3:2010 Steel for the reinforcement and prestressing of concrete. Test methods Prestressing steel
17/30357666 DC : DRAFT AUG 2017 BS ISO 5952 - STEEL SHEET, HOT-ROLLED, OF STRUCTURAL QUALITY WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
BS EN ISO 9809-2:2010 Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa
BS ISO 5832-4:2014 Implants for surgery. Metallic materials Cobalt-chromium-molybdenum casting alloy
BS EN ISO 9809-3:2010 Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Normalized steel cylinders
BS ISO 14590:2016 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
BS EN 4700-004:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire
BS ISO 4997:2015 Cold-reduced carbon steel sheet of structural quality
BS ISO 8168:2008 Aerospace. Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1100 MPa. Procurement specification
ISO 5832-11:2014 Implants for surgery — Metallic materials — Part 11: Wrought titanium 6-aluminium 7-niobium alloy
12/30255911 DC : 0 BS ISO 6316 - HOT-ROLLED STEEL STRIP OF STRUCTURAL QUALITY
BS ISO/ASTM 52921 : 2013 STANDARD TERMINOLOGY FOR ADDITIVE MANUFACTURING - COORDINATE SYSTEMS AND TEST METHODOLOGIES
BS ISO 9154:2016 Aerospace. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification
BS EN ISO 17078-4:2010 Petroleum and natural gas industries. Drilling and production equipment Practices for side-pocket mandrels and related equipment CD-ROM
UNE-EN 50149:2012 Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires
ISO 5001:2012 Cold-reduced carbon steel sheet for vitreous enamelling
15/30328590 DC : 0 BS ISO 8168 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF HEAT AND CORROSION RESISTING STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT SPECIFICATION
UNE-EN 50525-2-83:2012 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-83: Cables for general applications - Multicore cables with crosslinked silicone rubber insulation
12/30259070 DC : 0 BS EN 764-4 - PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
BS ISO 27306:2016 Metallic materials. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
DIN EN 10152:2015-10 (Draft) ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10205:1992-01 COLD REDUCED TIN-MILL PRODUCTS - BLACKPLATE
13/30288578 DC : 0 BS EN 10314 - METHOD FOR THE DERIVATION OF MINIMUM VALUES OF PROOF STRENGTH OF STEEL AT ELEVATED TEMPERATURES
17/30334112 DC : 0 BS ISO 20805 - HOT-ROLLED STEEL SHEET IN COILS OF HIGHER YIELD STRENGTH WITH IMPROVED FORMABILITY AND HEAVY THICKNESS FOR COLD FORMING
BS ISO 16143-3:2014 Stainless steels for general purposes Wire
NF EN ISO 15630-1 : 2010 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE
BS EN 15827:2011 Railway applications. Requirements for bogies and running gears
API 14A : 2015 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
UNE-EN 10338:2016 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
BS EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions
13/30266592 DC : 0 BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
ISO 11119-1:2012 Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
BS EN ISO 9693-1:2012 Dentistry. Compatibility testing Metal-ceramic systems
15/30312507 DC : 0 BS ISO 3575 - CONTINUOUS HOT-DIP ZINC-COATED AND ZINC-IRON ALLOY-COATED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES
PREN 14782 : DRAFT 2015 SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
UNI EN 4700-005 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
17/30347067 DC : 0 BS EN 10340-1 - STEEL CASTINGS FOR STRUCTURAL USES - PART 1: GENERAL
15/30326949 DC : 0 BS EN 62561-2 ED. 2 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES
13/30257993 DC : 0 BS EN ISO 6892-3 - METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE
12/30250152 DC : 0 BS ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE
BS EN 14638-3:2010 Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded carbon steel cylinders made to a design justified by experimental methods
17/30354758 DC : DRAFT JUL 2017 BS ISO 185 - GREY CAST IRONS - CLASSIFICATION AND SPECIFICATION
BS EN 4700-002:2016 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section
13/30279823 DC : 0 BS EN 16019 - RAILWAY APPLICATIONS - AUTOMATIC COUPLER - PERFORMANCE REQUIREMENTS, SPECIFIC INTERFACE GEOMETRY AND TEST METHOD
UNI EN 4700-004 : 2011 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire
BS EN 50288-1:2013 Multi-element metallic cables used in analogue and digital communication and control Generic specification
11/30254171 DC : 0 BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
14/30263397 DC : 0 BS EN ISO 22674 - DENTISTRY - METALLIC MATERIALS FOR FIXED AND REMOVABLE RESTORATIONS AND APPLIANCES
BS EN 4800-006:2010 Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production forgings
18/30362597 DC : 0 BS ISO 5832-12 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 12: WROUGHT COBALT-CHROMIUM-MOLYBDENUM ALLOY
PREN 754-1 : DRAFT 2015 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
CEI EN 50525-2-11 : 2012 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-11: CABLES FOR GENERAL APPLICATIONS - FLEXIBLE CABLES WITH THERMOPLASTIC PVC INSULATION
15/30324463 DC : 0 BS EN 755-2 - ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES
BS EN 4800-005:2010 Aerospace series. Titanium and titanium alloys. Technical specification Forging stock
14/30312176 DC : 0 BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
BS ISO 4990:2015 Steel castings. General technical delivery requirements
UNI EN 10216-5 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
BS EN 50149:2012 Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires
13/30288572 DC : 0 BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES
BS ISO 13270:2013 Steel fibres for concrete. Definitions and specifications
UNE-EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
BS ISO 6362-2:2014 Wrought aluminium and aluminium alloys. Extruded rods/bars, tubes and profiles Mechanical properties
DIN EN ISO 16120-1:2017-09 NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017)
12/30267860 DC : 0 BS EN 16482 - FOUNDING - CONTINUOUS CAST IRON BARS
ONORM EN 10217-7 : 2014 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
ISO 16631:2016 Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) piping systems, for water applications and for plastic pipeline connections, repair and replacement
UNI EN ISO 15630-2 : 2010 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC
13/30288575 DC : 0 BS EN 10273 - HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
14/30287989 DC : 0 BS ISO 4995 - HOT-ROLLED STEEL SHEET OF STRUCTURAL QUALITY
BS ISO 16143-2:2014 Stainless steels for general purposes Corrosion-resistant semi-finished products, bars, rods and sections
CEI EN 61788-19 : 2014 SUPERCONDUCTIVITY - PART 19: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF REACTED NB[3]SN COMPOSITE SUPERCONDUCTORS
ONORM EN 10216-5 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
11/30234408 DC : 0 BS ISO 15179 - HOT-ROLLED TWIN-ROLL CAST STEEL SHEET OF STRUCTURAL QUALITY AND HIGH STRENGTH STEEL
12/30248681 DC : 0 BS EN 14140 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
10/30217417 DC : 0 BS EN ISO 15614-13 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING
EN 13001-3-5:2016 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
BS EN 4800-004:2010 Aerospace series. Titanium and titanium alloys. Technical specification Wire
ISO 5950:2012 Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
15/30324460 DC : 0 BS EN 754-1 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
BS ISO 5832-11:2014 Implants for surgery. Metallic materials Wrought titanium 6-aluminium 7-niobium alloy
17/30352970 DC : 0 BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
UNI EN 4800-008 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS
BS EN ISO 17296-3:2016 Additive manufacturing. General principles Main characteristics and corresponding test methods
11/30230615 DC : 0 BS ISO 683-1 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING
17/30352966 DC : 0 BS EN ISO 15630-2 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC AND LATTICE GIRDER
PREN 10222-1 : DRAFT 2012 STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
PREN 10305-6 : DRAFT 2015 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
BS EN ISO 16120-1:2017 Non-alloy steel wire rod for conversion to wire General requirements
I.S. EN ISO 3183:2012 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
BS EN 1563:2011 Founding. Spheroidal graphite cast irons
BS EN ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread
UNE-EN 62561-2:2012 Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes
API 19G4 : 2011 PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT
UNE-EN 50525-2-11:2012 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation
ISO 15208:2012 Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality
ASTM F 3122 : 2014 Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes
BS EN ISO 6892-2:2011 Metallic materials. Tensile testing Method of test at elevated temperature
I.S. EN 61788-6:2011 SUPERCONDUCTIVITY - PART 6: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF CU/NB-TI COMPOSITE SUPERCONDUCTORS
UNE-EN 13674-4:2007 Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m
ONORM EN ISO 15630-3 : 2011 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
I.S. EN ISO 5832-2:2012 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM (ISO 5832-2:2018)
I.S. EN ISO 15630-2:2010 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC
NF EN ISO 26203-2 : 2011 METALLIC MATERIALS - TENSILE TESTING METHOD AT HIGH STRAIN RATES - PART 2: SERVO-HYDRAULIC AND OTHER TEST SYSTEMS
I.S. EN 4700-001:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
BS EN 485-2:2013 Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties
CEI EN 50525-2-83 : 2012 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-83: CABLES FOR GENERAL APPLICATIONS - MULTICORE CABLES WITH CROSSLINKED SILICONE RUBBER INSULATION
I.S. EN 13749:2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - METHOD OF SPECIFYING THE STRUCTURAL REQUIREMENTS OF BOGIE FRAMES
UNI EN 4700-003 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
I.S. EN ISO 6892-2:2011 METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE
ISO 683-18:2014 Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products
I.S. EN 10294-2:2012 HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES
I.S. EN ISO 26203-2:2011 METALLIC MATERIALS - TENSILE TESTING AT HIGH STRAIN RATES - PART 2: SERVO-HYDRAULIC AND OTHER TEST SYSTEMS (ISO 26203-2:2011)
I.S. EN 4800-004:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE
EN 13445-2:2014/A2:2018 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
BS ISO 16172:2011 Continuous hot-dip metallic coated steel sheet for corrugated steel pipe
I.S. EN 13110:2012 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
EN IEC 62561-2:2018 Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes
KTA 3211.1 : 2015 PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
PREN 14509 : DRAFT 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
BS ISO 20805:2017 Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming
UNI EN 13674-4 : 2010 RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M
CEN/TR 16748:2014 Aluminium and aluminium alloys - Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting
I.S. EN 15551:2017 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
UNE-EN ISO 898-2:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)
I.S. EN ISO 5755:2012 SINTERED METAL MATERIALS - SPECIFICATIONS (ISO 5755:2012)
EN 1562:2012 Founding - Malleable cast irons
ISO 6892-2:2018 Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
UNE-EN 10205:2017 Cold reduced tinmill products - Blackplate
17/30347070 DC : 0 BS EN 10340-2 - STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS
UNI EN 4800-007 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
ISO 6164:1994 Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
PREN 15566 : DRAFT 2013 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
UNE-EN 14353:2017 Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
API 19V : 2013 SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT
UNI EN ISO 12004-2 : 2009 METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF FORMING-LIMIT CURVES - PART 2: DETERMINATION OF FORMING-LIMIT CURVES IN THE LABORATORY
EN 13674-4:2006+A1:2009 RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M
UNI EN ISO 7866 : 2012 GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING
PREN 1559-2 : DRAFT 2012 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
UNE-EN 12952-5:2012 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
ISO 16172:2011 Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
DIN EN 1564:2012-01 Founding - Ausferritic spheroidal graphite cast irons
ISO 15630-1:2010 Steel for the reinforcement and prestressing of concrete Test methods Part 1: Reinforcing bars, wire rod and wire
EN ISO 15630-2:2010 Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2010)
ISO 6892-4:2015 Metallic materials Tensile testing Part 4: Method of test in liquid helium
I.S. EN 1092-1:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
ISO 5000:2011 Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
ISO 5002:2013 Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
I.S. EN 10270-1:2011+A1:2017 STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE
EN 60317-27:2014 Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire
ISO 5832-7:2016 Implants for surgery — Metallic materials — Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy
UNE-EN 14359:2017 Gas-loaded accumulators for fluid power applications
ISO 4997:2015 Cold-reduced carbon steel sheet of structural quality
IEC 62561-2:2018 Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes
I.S. EN 15566:2016 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
ISO 6931-1:2016 Stainless steels for springs Part 1: Wire
UNE-EN 10088-2:2015 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
I.S. EN 14509:2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
EN 1561:2011 Founding - Grey cast irons
EN 754-2:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties
EN 12163:2016 Copper and copper alloys - Rod for general purposes
DIN EN 12392:2016-08 Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
DIN EN 754-1:2016-10 ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 13110:2012-07 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
DIN EN 754-2:2016-05 (Draft) ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 2: MECHANICAL PROPERTIES
DIN EN 10216-3:2014-03 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
DIN EN ISO 11960:2014-05 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM
DIN EN 10303:2016-02 THIN MAGNETIC STEEL STRIP AND SHEET FOR USE AT MEDIUM FREQUENCIES
DIN EN 14276-1:2011-05 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
DIN EN 14140:2015-03 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
DIN EN ISO 15841:2014-12 Dentistry - Wires for use in orthodontics (ISO 15841:2014)
UNI EN 10216-2 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
DIN EN ISO 9018:2016-02 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TENSILE TEST ON CRUCIFORM AND LAPPED JOINTS (ISO 9018:2015)
DIN EN 12166:2015-12 (Draft) COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES
UNE-EN 14509:2014 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
ISO 17078-4:2010 Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment
BS EN 13674-1 : 2011 RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
UNE-EN ISO 9018:2016 Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2015)
BS EN 12735-2:2016 Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration Tubes for equipment
BS EN 545:2010 Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods
DIN EN 10305-2:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
BS EN 10217-7:2014 Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
BS EN 10305-5:2010 Steel tubes for precision applications. Technical delivery conditions Welded and cold sized square and rectangular tubes
UNE-EN 755-1:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
BS EN 1594:2013 Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
BS EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
UNE-EN 764-4:2015 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
BS EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
BS EN 10120:2017 Steel sheet and strip for welded gas cylinders
BS EN 12168:1998 Copper and copper alloys. Hollow rod for free machining purposes
UNE-EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
UNE-EN 12842:2013 Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
BS EN 1396:2007 Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications
UNE-EN 10305-3:2016 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
UNE-EN 13749:2012 Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames
DIN EN ISO 17641-2:2016-03 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HOT CRACKING TESTS FOR WELDMENTS - ARC WELDING PROCESSES - PART 2: SELFRESTRAINT TESTS (ISO 176412:2015)
UNE-EN 10088-3:2015 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
UNE-EN ISO 15841:2015 Dentistry - Wires for use in orthodontics (ISO 15841:2014)
UNE-EN 1982:2018 Copper and copper alloys - Ingots and castings
UNE-EN 10216-4:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
EN 14276-1:2020 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
DIN EN 10305-5:2016-08 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
UNE-EN 12450:2013 Copper and copper alloys - Seamless, round copper capillary tubes
UNE-EN 1564:2012 Founding - Ausferritic spheroidal graphite cast irons
UNE-EN 12449:2016 Copper and copper alloys - Seamless, round tubes for general purposes
ONORM EN ISO 13680 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
UNI EN ISO 13680 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
UNI EN 14276-1 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
ONORM EN 14276-1 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
EN 13094:2015 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
EN ISO 13680:2010 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010)
I.S. EN 13094:2015 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION
UNI EN ISO 3506-1 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
ONORM EN ISO 3506-1 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
EN ISO 7711-2:2011 Dentistry - Rotary diamond instruments - Part 2: Discs (ISO 7711-2:2011)
EN 485-1:2016 Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
EN ISO 7441:2015 Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric exposure corrosion tests (ISO 7441:2015)
UNI EN 10088-3 : 2014 STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNI EN 10269 : 2013 Nickel steels and alloys for fasteners with specific properties at high and / or low temperatures
UNI EN 12952-5 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
UNI EN 10268 : 2013 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
UNI EN 14509 : 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
UNI EN 1172 : 2012 COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES
UNI EN 13599 : 2014 COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES
UNI EN 13835 : 2012 FOUNDING - AUSTENITIC CAST IRONS
UNI EN ISO 10451 : 2010 DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS
EN 1559-2:2014 Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
UNI EN 12952-2 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
UNI EN ISO 18265 : 2014 METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES
UNI EN 1559-2 : 2014 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
UNI EN 14893 : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
UNI EN 12451 : 2012 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS
ONORM EN 14592 : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
UNI EN 12842 : 2012 DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
UNI EN 1561 : 2011 FOUNDING - GREY CAST IRONS
UNI EN 1520 : 2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement
UNI EN ISO 898-1 : 2013 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
UNI EN 1559-1 : 2011 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
UNI EN ISO 28781 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT
UNI EN 1564 : 2011 FOUNDING - AUSFERRITIC SPHEROIDAL GRAFITE CAST IRONS
UNI EN 1594 : 2013 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
UNI EN 14985 : 2012 CRANES - SLEWING JIB CRANES
UNI EN ISO 7711-2 : 2011 DENTISTRY - ROTARY DIAMOND INSTRUMENTS - PART 2: DISCS
UNI EN 10216-4 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
UNI EN 12450 : 2013 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES
UNI EN 10216-1 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
UNI EN 545 : 2010 DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
UNI EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNI EN 10270-2 : 2011 STEEL WIRE FOR MECHANICAL SPRINGS - PART 2: OIL HARDENED AND TEMPERED SPRING STEEL WIRE
UNI EN 14140 : 2015 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
UNI EN 10209 : 2013 COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS
UNI EN 12452 : 2012 COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS
UNI EN 10216-3 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
UNI EN 1977 : 2013 COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD)
UNI EN 13602 : 2013 COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS
ONORM EN ISO 15614-13 : 2012 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012)
UNI EN 10149-1 : 2013 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNI EN 13148 : 2010 COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP
UNI EN 15827 : 2011 RAILWAY APPLICATIONS - REQUIREMENTS FOR BOGIES AND RUNNING GEARS
UNI EN 13604 : 2013 COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER
UNI EN 4800-001 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
UNI CEN/TS 15718 : 2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS
DIN EN 16124:2012-02 Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications
ASTM F 2921 : 2013 TERMINOLOGY FOR ADDITIVE MANUFACTURING - COORDINATE SYSTEMS AND TEST METHODOLOGIES
UNI EN ISO 18592 : 2010 RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - METHOD FOR THE FATIGUE TESTING OF MULTI-SPOT-WELDED SPECIMENS
UNI EN ISO 26203-2 : 2011 METALLIC MATERIALS - TENSILE TESTING AT HIGH STRAIN RATES - PART 2: SERVO-HYDRAULIC AND OTHER TEST SYSTEMS
12/30258894 DC : 0 BS ISO 3574 - COLD-REDUCED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES
DIN ISO 5832-11 E : 2015 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 11: WROUGHT TITANIUM 6-ALUMINIUM 7-NIOBIUM ALLOY (ISO 5832-11:2014)
DIN EN ISO 6892-3:2015-07 METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE (ISO 6892-3:2015)
I.S. EN ISO 9693-1:2012 DENTISTRY - COMPATIBILITY TESTING - PART 1: METAL-CERAMIC SYSTEMS (ISO 9693-1:2012)
NF EN ISO 9809-2 : 2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
13/30252103 DC : 0 BS ISO 4991 - STEEL CASTINGS FOR PRESSURE PURPOSES
ISO 4995:2014 Hot-rolled steel sheet of structural quality
14/30278586 DC : 0 BS ISO 606 - SHORT-PITCH TRANSMISSION PRECISION ROLLER AND BUSH CHAINS, ATTACHMENTS AND ASSOCIATED CHAIN SPROCKETS
BS EN 4800-008:2010 Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production castings
DIN EN 16914 E : 2017 ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS
DIN EN 14353:2016-02 (Draft) METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
ASTM F 3318 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam
ISO 15698-1:2012 Steel for the reinforcement of concrete — Headed bars — Part 1: Requirements
BS EN ISO 22068:2014 Sintered-metal injection-moulded materials. Specifications
DIN EN 15551 E : 2011 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
ISO 8535-1:2016 Diesel engines Steel tubes for high-pressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes
PREN 10205 : DRAFT 2014 COLD REDUCED TINMILL PRODUCTS - BLACKPLATE
UNI EN 4800-003 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE
16/30340174 DC : 0 BS ISO 16220 - MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOY INGOTS AND CASTINGS
DIN EN 13749:2011-06 Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames
DIN ISO 5832-7:2001-07 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 7: FORGEABLE AND COLD-FORMED COBALT-CHROMIUM-NICKEL-MOLYBDENUM-IRON ALLOY (ISO 5832-7:2016)
09/30196316 DC : 0 BS ISO 6361-1 - WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS - SHEETS, STRIPS AND PLATES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
11/30234411 DC : 0 BS ISO 15208 - CONTINUOUS HOT-DIP ZINC-COATED TWIN-ROLL CAST STEEL SHEET OF COMMERCIAL QUALITY
ISO 18762:2016 Tubes of titanium and titanium alloys Welded tubes for condensers and heat exchangers Technical delivery conditions
EN 10216-5:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
BS ISO 15211:2012 Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel
16/30336440 DC : DRAFT MAR 2016 BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
DIN ISO 5832-4:2015-12 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 4: COBALT-CHROMIUM-MOLYBDENUM CASTING ALLOY (ISO 5832-4:2014)
15/30325003 DC : 0 BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
BS ISO 683-5:2017 Heat treatable steels, alloy steels and free-cutting steels Nitriding steels
UNI EN 16079 : 2012 FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS
BS EN ISO 5755:2012 Sintered metal materials. Specifications
NACE TM 03 16 : 2016 FOUR-POINT BEND TESTING OF MATERIALS FOR OIL AND GAS APPLICATIONS
13/30247837 DC : 0 BS EN 13094 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION
UNE-EN ISO 5832-3:2017 Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2016)
UNI EN ISO 22068 : 2014 SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS
BS EN 60317-27:2014 Specifications for particular types of winding wires Paper tape covered rectangular copper wire
17/30334109 DC : 0 BS ISO 14788 - STEEL SHEET, ZINC-5% ALUMINIUM ALLOY-COATED BY THE CONTINUOUS HOT-DIP PROCESS, OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES
I.S. EN 4700-002:2016 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
ONORM EN 1065 : 2013 ADJUSTABLE TELESCOPIC STEEL PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS
PREN 13674-4 : DRAFT 2016 RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M
DIN EN 10139:2016-06 COLD ROLLED UNCOATED LOW CARBON STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
ISO 16540:2015 Corrosion of metals and alloys Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
12/30252148 DC : 0 BS ISO 17440 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED STEEL HOOKS
DIN EN ISO 6892-3 E : 2015 METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE (ISO 6892-3:2015)
14/30301272 DC : 0 BS EN 10205 - COLD REDUCED TINMILL PRODUCTS - BLACKPLATE
12/30266615 DC : 0 BS EN 1559-2 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
BS ISO 16220:2017 Magnesium and magnesium alloys. Magnesium alloy ingots and castings
BS EN 4700-003:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube
12/30266422 DC : DRAFT JULY 2012 BS EN ISO 4136 - DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TRANSVERSE TENSILE TEST
BS EN 4800-001:2010 Aerospace series. Titanium and titanium alloys. Technical specification Plate, sheet and strip
BS EN ISO 15156-3:2015 Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
DIN EN 14592:2012-07 Timber structures - Dowel-type fasteners - Requirements (includes Amendment A1:2012)
DIN EN 13674-4:2016-05 (Draft) RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M
12/30246885 DC : 0 BS ISO 16842 - METALLIC MATERIALS - SHEET AND STRIP - BIAXIAL TENSILE TESTING METHOD USING CRUCIFORM SPECIMEN
13/30248090 DC : 0 BS ISO 11951 - COLD-REDUCED BLACKPLATE IN COIL FORM FOR THE PRODUCTION OF TINPLATE OR ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL
14/30294825 DC : 0 BS EN 10263-1 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
BS ISO 15179:2012 Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
PREN 14592 : DRAFT 2017 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
13/30288195 DC : 0 BS EN 10303 - THIN MAGNETIC STEEL SHEET AND STRIP FOR USE AT MEDIUM FREQUENCIES
BS EN 61788-18:2013 Superconductivity Mechanical properties measurement. Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
13/30241415 DC : 0 BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
DIN EN 14638-3:2012-06 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods (includes Corrigendum AC:2012)
14/30268888 DC : 0 BS ISO 16631 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS COMPATIBLE WITH PLASTIC (PVC AND PE) PIPING SYSTEMS FOR WATER APPLICATIONS
BS ISO 16540:2015 Corrosion of metals and alloys. Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
DIN EN 14509 E : 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
BS ISO 17440:2014 Cranes. General design. Limit states and proof of competence of forged steel hooks
BS ISO 3575:2011 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
BS EN 4800-002:2010 Aerospace series. Titanium and titanium alloys. Technical specification Bar and section
15/30324991 DC : 0 BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
BS EN 4800-003:2010 Aerospace series. Titanium and titanium alloys. Technical specification Tube
13/30242622 DC : 0 BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS
DIN EN 16079:2012-02 Founding - Compacted (vermicular) graphite cast irons; German version EN 16079:2011
BS ISO 6722-2:2013 Road vehicles. 60 V and 600 V single-core cables Dimensions, test methods and requirements for aluminium conductor cables
15/30331856 DC : 0 BS EN ISO 10855-1 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINER - DESIGN, MANUFACTURE AND MARKING
I.S. EN 61788-18:2013 SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS
BS EN 16482:2014 Founding. Continuous cast iron bars
16/30326542 DC : 0 BS ISO 5832-7 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 7: FORGEABLE AND COLD-FORMED COBALT-CHROMIUM-NICKEL-MOLYBDENUM-IRON ALLOY
UNI EN 10294-2 : 2012 HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES
BS ISO 16143-1:2014 Stainless steels for general purposes Corrosion-resistant flat products
I.S. EN 50525-2-83:2011 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-83: CABLES FOR GENERAL APPLICATIONS - MULTICORE CABLES WITH CROSSLINKED SILICONE RUBBER INSULATION
15/30324997 DC : 0 BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
13/30280527 DC : 0 BS ISO 4999 - CONTINUOUS HOT-DIP TERNE (LEAD ALLOY) COATED COLD-REDUCED CARBON STEEL SHEET OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES
UNI EN ISO 21672-1 : 2012 DENTISTRY - PERIODONTAL PROBES - PART 1: GENERAL REQUIREMENTS
I.S. EN IEC 62561-2:2018 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES
ISO 10799-1:2011 Cold-formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions
DIN EN ISO 9809-1:2010-10 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
UNI EN 14638-3 : 2010 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
DIN EN ISO 3183:2013-03 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
IS 1367 : Part 3 : 2017 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS
ISO 15179:2012 Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
BS ISO 606:2015 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
UNE-EN ISO 11118:2016 Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods (ISO 11118:2015)
API 6A : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
UNE-EN 14592:2009 Timber structures - Dowel-type fasteners - Requirements
I.S. EN 4800-005:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
DIN EN 14811:2016-08 (Draft) RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION
UNI EN ISO 3183 : 2012 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
ISO 10855-1:2018 Offshore containers and associated lifting sets Part 1: Design, manufacture and marking of offshore containers
I.S. EN ISO 6892-3:2015 METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE (ISO 6892-3:2015)
ISO 11119-3:2013 Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners
ISO 3575:2016 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
UNI EN ISO 9693-1 : 2012 DENTISTRY - COMPATIBILITY TESTING - PART 1: METAL-CERAMIC SYSTEMS
I.S. EN 10338:2015 HOT ROLLED AND COLD ROLLED NON-COATED PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
ONORM EN ISO 11960 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
ISO 13887:2017 Steel sheet, cold-reduced, of higher yield strength with improved formability
UNI EN ISO 898-2 : 2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
ISO 4999:2014 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
ISO 5832-1:2016 Implants for surgery — Metallic materials — Part 1: Wrought stainless steel
I.S. EN 14460:2018 EXPLOSION RESISTANT EQUIPMENT
BS EN ISO 3183 : 2012 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
S.R. CEN/TR 14585-3:2017 CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 3: DESIGN METHOD
EN 14460:2018 Explosion resistant equipment
PREN 10269 : DRAFT 2011 STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
ISO 14788:2017 Steel sheet, zinc-5 % aluminium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities
I.S. EN 10346:2015 CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN ISO 15630-3:2011-02 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
PREN 10273 : DRAFT 2013 HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
BS EN 10207:2017 Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars
ISO 20032:2013 Method for evaluation of tensile properties of metallic superplastic materials
UNE-EN 1562:2012 Founding - Malleable cast irons
DIN EN 12493:2014-03 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
UNI EN 14811 : 2010 RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION
API 6D :2015 SPECIFICATION FOR PIPELINE AND PIPING VALVES
ISO 16143-1:2014 Stainless steels for general purposes Part 1: Corrosion-resistant flat products
PREN 13674-2 : DRAFT 2016 RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
PREN 14195 : DRAFT 2011 METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 4700-001 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
PREN 12449 : DRAFT 2011 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
ASTM A 1058 : 2014 : REDLINE Standard Test Methods for Mechanical Testing of Steel Products—Metric
ASTM F 3160 : 2016 Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants
ONORM EN 13601 : 2013 COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
EN ISO 5832-2:2018 Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:2018)
UNE-EN 485-2:2017 Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
ONORM EN 13605 : 2013 COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES
UNE-EN 16124:2012 Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications
UNE-EN 15551:2017 Railway applications - Railway rolling stock - Buffers
DIN EN 10270-3:2012-01 STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE
EN ISO 26203-1:2018 Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems (ISO 26203-1:2018)
ISO 5952:2011 Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
ISO 6316:2012 Hot-rolled steel strip of structural quality
EN 14811:2006+A1:2009 RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION
ISO 12891-2:2014 Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants
ISO 5003:2016 Flat bottom (Vignole) railway rails 43 kg/m and above
ISO 11513:2011 Gas cylinders Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging (excluding acetylene) Design, construction, testing, use and periodic inspection
ISO 6932:2014 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
DIN EN 16914:2015-12 (Draft) ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS
PREN 10340-2 : DRAFT 2017 STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS
EN 754-1:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery
ISO 16143-2:2014 Stainless steels for general purposes Part 2: Corrosion-resistant semi-finished products, bars, rods and sections
I.S. EN 14592:2008 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
ISO 11515:2013 Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing
EN ISO 15630-3:2010 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010)
ISO 6362-1:2012 Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery
I.S. EN 13674-4:2006 RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M
I.S. EN 4700-005:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
I.S. EN 755-2:2016 ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES
I.S. EN ISO 26203-1:2018 METALLIC MATERIALS - TENSILE TESTING AT HIGH STRAIN RATES - PART 1: ELASTIC-BAR-TYPE SYSTEMS (ISO 26203-1:2018)
I.S. EN 62047-9:2011 SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 9: WAFER TO WAFER BONDING STRENGTH MEASUREMENT FOR MEMS
I.S. EN 10263-1:2017 STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
ISO 6722-2:2013 Road vehicles — 60 V and 600 V single-core cables — Part 2: Dimensions, test methods and requirements for aluminium conductor cables
EN 10216-2:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
ONORM EN ISO 3183 : 2013 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
ONORM EN ISO 9809-3 : 2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
DIN EN 13094:2015-07 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION
DIN EN 10268:2013-12 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 485-1:2016-10 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
DIN EN 15048-2:2016-09 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE
DIN EN 10216-4:2014-03 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
DIN EN 10217-7:2015-01 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
DIN EN 10314:2016-10 METHOD FOR THE DERIVATION OF MINIMUM VALUES OF PROOF STRENGTH OF STEEL AT ELEVATED TEMPERATURES
DIN EN ISO 18265:2014-02 METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013)
DIN EN 485-2:2016-10 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES
DIN EN ISO 7711-2 E : 2011 DENTISTRY - ROTARY DIAMOND INSTRUMENTS - PART 2: DISCS (ISO 7711-2:2011)
DIN EN 10272:2016-10 STAINLESS STEEL BARS FOR PRESSURE PURPOSES
BS EN 1564:2011 Founding. Ausferritic spheroidal graphite cast irons
UNE-EN 1172:2012 Copper and copper alloys - Sheet and strip for building purposes
BS EN 12392:2016 Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment
BS EN 13605:2013 Copper and copper alloys. Copper profiles and profiled wire for electrical purposes
BS EN ISO 13680:2010 Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions
BS EN 1559-2:2014 Founding. Technical conditions of delivery Additional requirements for steel castings
UNE-EN 14140:2015 LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
UNE-EN 10270-2:2012 Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire
ISO 13680:2010 Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions
UNE-EN 1396:2015 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
I.S. EN 10139:2016 COLD ROLLED UNCOATED LOW CARBON STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS EN 1982:2017 Copper and copper alloys. Ingots and castings
BS EN 10209:2013 Cold rolled low carbon steel flat products for vitreous enameling. Technical delivery conditions
BS EN 10216-5:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
BS EN 12735-1:2016 Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration Tubes for piping systems
UNE-EN 13602:2014 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors
BS EN 10303:2015 Thin magnetic steel strip and sheet for use at medium frequencies
BS EN ISO 15156-2:2015 Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons
UNE-EN 10303:2016 Thin magnetic steel strip and sheet for use at medium frequencies
UNE-EN 10216-2:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 14359:2017 Gas-loaded accumulators for fluid power applications
ISO 15156-3:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
IEC 61788-18:2013 Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
ISO 9693-1:2012 Dentistry Compatibility testing Part 1: Metal-ceramic systems
ISO 21672-1:2012 Dentistry — Periodontal probes — Part 1: General requirements
ISO 15614-13:2012 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Upset (resistance butt) and flash welding
BS EN 755-1:2016 Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Technical conditions for inspection and delivery
ISO 17641-2:2015 Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes Part 2: Self-restraint tests
UNE-EN 12452:2013 Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
BS EN 14140:2014 LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Alternative design and construction
EN ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
BS EN 485-1 : 2008 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
BS EN 131-2 : 2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
BS EN 10216-3:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes
UNE-EN 13601:2014 Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
BS EN 12451:2012 Copper and copper alloys. Seamless, round tubes for heat exchangers
BS EN 10305-6:2016 Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes for hydraulic and pneumatic power systems
BS EN 1561:2011 Founding. Grey cast irons
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
UNE-EN 12952-2:2012 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
BS EN 12952-5:2011 Water-tube boilers and auxiliary installations Workmanship and construction of pressure parts of the boiler
UNI EN 12735-1 : 2010 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 1: TUBES FOR PIPING SYSTEMS
UNE-EN 754-1:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery
UNE-EN 13148:2012 Copper and copper alloys - Hot-dip tinned strip
BS EN 10270-3:2011 Steel wire for mechanical springs Stainless spring steel wire
UNE-EN 10305-2:2016 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
ONORM EN ISO 9809-2 : 2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
UNE-EN ISO 7711-2:2012 Dentistry - Rotary diamond instruments - Part 2: Discs (ISO 7711-2:2011)
UNE-EN 12735-2:2016 Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
ISO 15841:2014 Dentistry Wires for use in orthodontics
UNE-EN 13230-3:2016 Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers
UNE-EN 12451:2013 Copper and copper alloys - Seamless, round tubes for heat exchangers
ISO 5755:2012 Sintered metal materials — Specifications
BS EN ISO 10423:2009 Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM
BS EN 15048-2:2007 Non-preloaded structural bolting assemblies Suitability test
BS EN 10314:2002 Method for the derivation of minimum values of proof strength of steel at elevated temperatures
BS EN 764-4:2014 Pressure equipment Establishment of technical delivery conditions for metallic materials
EN 12735-1:2016 Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
UNE-EN 14195:2015 Metal framing components for gypsum board systems - Definitions, requirements and test methods
ISO 11118:2015 Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods
BS EN 10088-3:2014 Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
ISO 9809-2:2010 Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa
UNE-EN ISO 15614-13:2013 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012)
UNE-EN 10269:2014 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
UNE-EN 13835:2012 Founding - Austenitic cast irons
ISO 22674:2016 Dentistry — Metallic materials for fixed and removable restorations and appliances
BS EN 12167:2011 Copper and copper alloys. Profiles and bars for general purposes
UNE-EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
ISO 10423:2009 Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment
UNE-EN ISO 11439:2013 Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO/FDIS 11439:2013)
ISO 16120-1:2017 Non-alloy steel wire rod for conversion to wire — Part 1: General requirements
I.S. EN 12735-1:2016 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 1: TUBES FOR PIPING SYSTEMS
ISO 11970:2016 Specification and qualification of welding procedures for production welding of steel castings
BS EN 10270-2:2011 Steel wire for mechanical springs Oil hardened and tempered spring steel wire
ISO 7866:2012 Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing
ISO 9809-3:2010 Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders
IEC 60317-27:2013 Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire
ISO 11120:2015 Gas cylinders Refillable seamless steel tubes of water capacity between 150 l and 3000 l Design, construction and testing
BS EN 13230-3:2016 Railway applications. Track. Concrete sleepers and bearers Twin-block reinforced sleepers
ISO 9809-1:2010 Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
BS EN ISO 7441:2015 Corrosion of metals and alloys. Determination of bimetallic corrosion in atmospheric exposure corrosion tests
ISO 15136-1:2009 Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps
ISO 26203-2:2011 Metallic materials — Tensile testing at high strain rates — Part 2: Servo-hydraulic and other test systems
ISO 15156-2:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
BS EN 10305-3:2016 Steel tubes for precision applications. Technical delivery conditions Welded cold sized tubes
UNE-EN 16914:2017 Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions
EN 14276-1:2006+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
UNE-EN 13110:2012 LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
IEC 61788-19:2013 Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors
UNE-EN 13600:2014 Copper and copper alloys - Seamless copper tubes for electrical purposes
UNE-EN 13094:2015 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
DIN EN 10270-1:2017-09 STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE
ISO 4136:2012 Destructive tests on welds in metallic materials Transverse tensile test
UNE-EN 1442:2017 LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
BS EN 14276-1 : 2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
ISO 7711-2:2011 Dentistry Rotary diamond instruments Part 2: Discs
BS EN 13599:2014 Copper and copper alloys. Copper plate, sheet and strip for electrical purposes
ISO 7441:2015 Corrosion of metals and alloys Determination of bimetallic corrosion in atmospheric exposure corrosion tests
BS EN 10139:2016 Cold rolled uncoated low carbon steel narrow strip for cold forming. Technical delivery conditions
BS EN 10305-1:2016 Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes
UNE-EN 10216-3:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
BS EN 13601:2013 Copper and copper alloys. Copper rod, bar and wire for general electrical purposes
BS EN 12732 : 2013 GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
BS EN ISO 10451:2010 Dentistry. Contents of technical file for dental implant systems
10/30218104 DC : 0 BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES
UNE-EN 1594:2014 Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
BS EN 12452:2012 Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers
BS EN 1442 : 2006 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
UNE-EN ISO 18265:2014 Metallic materials - Conversion of hardness values (ISO 18265:2013)
ISO 22068:2012 Sintered-metal injection-moulded materials — Specifications
I.S. EN ISO 3506-1:2009 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
ISO 9018:2015 Destructive tests on welds in metallic materials Tensile test on cruciform and lapped joints
ISO 17296-3:2014 Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods
BS EN 13602:2013 Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors
BS EN 12166:2011 Copper and copper alloys. Wire for general purposes
BS EN 12164:2011 Copper and copper alloys. Rod for free machining purposes
UNE-EN 12732:2014+A1:2014 Gas infrastructure - Welding steel pipework - Functional requirements
UNE-EN 10149-1:2014 Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
UNE-EN 13348:2016 Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum
UNE-EN 13110:2012+A1:2017 LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
ISO 18592:2009 Resistance welding Destructive testing of welds Method for the fatigue testing of multi-spot-welded specimens
UNE-EN 10216-5:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
EN 10139:2016 Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
ISO 10451:2010 Dentistry — Contents of technical file for dental implant systems
BS EN 13604:2013 Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper
UNE-EN 10216-1:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
BS EN ISO 11120:2015 Gas cylinders. Refillable seamless steel tubes of water capacity between 150 l and 3000 l. Design, construction and testing
UNE-EN 15827:2011 Railway applications - Requirements for bogies and running gears
UNE-EN 10270-3:2012 Steel wire for mechanical springs - Part 3: Stainless spring steel wire
EN ISO 11118 : 2015 COR 2015 GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015)
UNE-EN ISO 7866:2013 Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012)
BS EN ISO 11439:2013 Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
UNE-EN 10028-1:2017 Flat products made of steels for pressure purposes - Part 1: General requirements
IEC 61788-6:2011 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
UNE-EN 485-1:2017 Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
BS EN 10149-1:2013 Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions
DIN EN 13835:2012-04 FOUNDING - AUSTENITIC CAST IRONS
EN 50525-2-83:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-83: Cables for general applications - Multicore cables with crosslinked silicone rubber insulation
EN 1442:2017 LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
EN ISO 5755:2012 Sintered metal materials - Specifications (ISO 5755:2012)
EN 16019:2014 Railway applications - Automatic coupler - Performance requirements, specific interface geometry and test method
EN 4800-003:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube
EN ISO 11970:2016 Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016)
EN 755-1:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
EN ISO 26203-2:2011 Metallic materials - Tensile testing at high strain rates - Part 2: Servo-hydraulic and other test systems (ISO 26203-2:2011)
EN 14592:2008+A1:2012 Timber structures - Dowel-type fasteners - Requirements
EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)
EN 14359:2017 Gas-loaded accumulators for fluid power applications
EN 14893:2014 LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
EN 4800-002:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section
EN ISO 18592:2009 Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens (ISO 18592:2009)
EN 4800-001:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip
EN 13599:2014 Copper and copper alloys - Copper plate, sheet and strip for electrical purposes
EN 13835:2012 Founding - Austenitic cast irons
EN ISO 22674:2016 Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016)
EN ISO 15136-1:2009 Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009)
EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
EN 4700-005:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock
EN 1396:2015 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
ONORM EN 12732 : JUL 2014 GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
EN ISO/ASTM 52921:2016 Standard terminology for additive manufacturing - Coordinate systems and test methodologies (ISO/ASTM 52921:2013)
EN 15551:2017 Railway applications - Railway rolling stock - Buffers
EN 16914:2017 Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions
EN 1564:2011 Founding - Ausferritic spheroidal graphite cast irons
EN 16451:2015 Railway applications - Braking - Brake pad holder
EN ISO 11120:2015 Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015)
EN 4700-003:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube
EN 14509:2013 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
EN 13604:2013 Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper
EN 15827:2011 Railway applications - Requirements for bogies and running gears
EN ISO 18265:2013 Metallic materials - Conversion of hardness values (ISO 18265:2013)
EN 16124:2011 Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications
EN ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015)
EN ISO 9809-1:2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa (ISO 9809-1:2010)
EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
EN ISO 9809-3:2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010)
EN ISO 10451:2010 Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010)
EN ISO 10423:2009 Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009)
EN 15048-2:2016 Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
EN 4700-007:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock
EN 1594:2013 Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
EN ISO 9809-2:2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2010)
EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
EN 1977:2013 Copper and copper alloys - Copper drawing stock (wire rod)
EN 12842:2012 Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
EN 13674-1:2011+A1:2017 Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above
EN 16482:2014 Founding - Continuous cast iron bars
EN ISO 17296-3:2016 Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014)
EN 4800-004:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire
EN 14140:2014/AC:2015 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
EN ISO 17641-2:2015 Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17641-2:2015)
EN 13602:2013 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors
EN 14638-3:2010/AC:2012 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
EN 15566:2016 Railway applications - Railway rolling stock - Draw gear and screw coupling
EN 14353:2017 Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
EN 14195:2014 Metal framing components for gypsum board systems - Definitions, requirements and test methods
EN 16079:2011 Founding - Compacted (vermicular) graphite cast irons
EN ISO 4136:2012 Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
EN ISO 9693-1:2012 Dentistry - Compatibility testing - Part 1: Metal-ceramic systems (ISO 9693-1:2012)
EN 4800-006:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings
EN ISO 17078-4:2010 Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010)
EN 4800-008:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 008: Pre-production and production castings
EN 4800-007:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock
EN ISO 28781:2010 Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010)
EN 4700-004:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire
EN 4800-005:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock
EN ISO 21672-1:2012 Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012)
EN 4700-001:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip
EN 4700-006:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings
EN ISO 9018:2015 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TENSILE TEST ON CRUCIFORM AND LAPPED JOINTS (ISO 9018:2015)
EN 764-4:2014 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
EN 13480-8:2017 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
I.S. EN ISO 16120-1:2017 NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017)
11/30242625 DC : 0 BS ISO 5838-1 - IMPLANTS FOR SURGERY - METALLIC SKELETAL PINS AND WIRES - PART 1: GENERAL REQUIREMENTS
13/30280934 DC : 0 BS EN ISO 7500-1 - METALLIC MATERIALS - VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - VERIFICATION AND CALIBRATION OF THE FORCE-MEASURING SYSTEM
15/30327154 DC : 0 BS EN 16914 - ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS
17/30354719 DC : 0 BS ISO 19642-6 - ROAD VEHICLES - AUTOMOTIVE CABLES - PART 6: DIMENSIONS AND REQUIREMENTS FOR 600 V A.C. OR 900 V D.C., 1000 V A.C. OR 1500 V D.C. SINGLE CORE ALUMINIUM CONDUCTOR CABLES
UNE-EN 10294-2:2012 Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties
UNE-EN ISO 21672-1:2012 Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012)
CEI EN 61788-6 : 2012 SUPERCONDUCTIVITY - PART 6: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF CU/NB-TI COMPOSITE SUPERCONDUCTORS
PREN 10253-2 : DRAFT 2017 BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
BS EN 4700-001:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip
BS ISO 17296-3 : 2014 ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS
UNE-EN 14893:2014 LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
17/30353583 DC : 0 BS ISO 19427 - STEEL WIRE ROPES - PRE-FABRICATED PARALLEL WIRE STRANDS FOR SUSPENSION BRIDGE MAIN CABLE - SPECIFICATIONS
DIN EN ISO 22068:2014-06 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)
ISO 15177:2012 Hot-rolled twin-roll cast carbon steel sheet of commercial quality
16/30339983 DC : 0 BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES
BS EN ISO 28781:2010 Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment
14/30284697 DC : 0 BS ISO 683-5 - HEAT TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 5: NITRIDING STEELS
PREN 10263-1 : DRAFT 2014 STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
API 6A REDLINE : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
ISO 5951:2013 Hot-rolled steel sheet of higher yield strength with improved formability
UNE-EN 15566:2017 Railway applications - Railway rolling stock - Draw gear and screw coupling
17/30346747 DC : 0 BS ISO 9328-1 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL REQUIREMENTS
17/30341500 DC : 0 BS EN ISO 5832-2 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM
BS EN 12493 : 2013 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
EN ISO 11960:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
11/30203534 DC : DRAFT AUG 2011 BS ISO 13270 - STEEL FIBRES FOR CONCRETE - DEFINITIONS AND SPECIFICATIONS
BS EN 62561-2:2012 Lightning Protection System Components (LPSC) Requirements for conductors and earth electrodes
UNE-EN ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015)
DIN EN 10346:2015-10 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
I.S. EN 61788-19:2014 SUPERCONDUCTIVITY - PART 19: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF REACTED NB[3]SN COMPOSITE SUPERCONDUCTORS
PREN 1563 : DRAFT 2015 FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
CEN/TR 14585-3:2017 Corrugated metal hose assemblies for pressure applications - Part 3: Design method
17/30346741 DC : 0 BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES
ISO 19203:2018 Hot-dip galvanized and zinc-aluminium coated high tensile steel wire for bridge cables — Specifications
API 5C6 : 2006 PIPE WITH WELDED CONNECTORS
BS ISO 13583-1:2015 Centrifugally cast steel and alloy products General testing and tolerances
14/30312182 DC : 0 BS EN 10028-1 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
UNE-EN 16079:2012 Founding - Compacted (vermicular) graphite cast irons
ISO 683-4:2016 Heat-treatable steels, alloy steels and free-cutting steels Part 4: Free-cutting steels
I.S. EN 60317-27:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 27: PAPER TAPE COVERED RECTANGULAR COPPER WIRE
I.S. EN 4700-003:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
17/30346735 DC : 0 BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS
PREN 10088-3 : DRAFT 2011 STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNE-EN 1563:2012 Founding - Spheroidal graphite cast irons
UNI EN 1562 : 2012 FOUNDING - MALLEABLE CAST IRONS
15/30317351 DC : 0 BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING
13/30252127 DC : 0 BS ISO 13583-1 - CENTRIFUGALLY CAST STEEL AND ALLOY PRODUCTS - PART 1: GENERAL TESTING AND TOLERANCES
13/30280533 DC : 0 BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25%
15/30312513 DC : 0 BS ISO 14590 - COLD-REDUCED STEEL SHEET OF HIGH TENSILE STRENGTH AND LOW YIELD POINT WITH IMPROVED FORMABILITY
BS EN 16914:2017 Aluminium and aluminium alloys. Hot-rolled armour plates in weldable aluminium alloy. Technical delivery conditions
17/30351224 DC : 0 BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
BS EN ISO 15630-1:2010 Steel for the reinforcement and prestressing of concrete. Test methods Reinforcing bars, wire rod and wire
ONORM EN ISO 7866 : 2014 GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012 + COR 1:2014)
BS EN 4700-007:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock
12/30272214 DC : 0 BS ISO DIS 52921 - STANDARD TERMINOLOGY FOR ADDITIVE MANUFACTURING - COORDINATE SYSTEMS AND TEST METHODOLOGIES
I.S. EN 16019:2014 RAILWAY APPLICATIONS - AUTOMATIC COUPLER - PERFORMANCE REQUIREMENTS, SPECIFIC INTERFACE GEOMETRY AND TEST METHOD
I.S. EN 4800-003:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE
13/30271610 DC : 0 BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS
DIN EN 16451 E : 2015 RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
BS EN ISO 4136:2012 Destructive tests on welds in metallic materials. Transverse tensile test
ISO 4990:2015 Steel castings — General technical delivery requirements
DIN EN ISO 9809-2:2010-10 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
UNE-EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012)
BS EN ISO 11118:2015 Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods
I.S. EN ISO 28781:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT
UNE-EN 14638-3:2011 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods
EN 13605:2013 Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
UNI EN ISO 15841 : 2014 DENTISTRY - WIRES FOR USE IN ORTHODONTICS
I.S. EN ISO 17296-3:2016 ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014)
DIN EN ISO 5755:2013-01 Sintered metal materials - Specifications (ISO 5755:2012)
DIN EN 10209:2013-09 Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions
BS EN 4800-007:2010 Aerospace series. Titanium and titanium alloys Remelting stock
15/30324988 DC : 0 BS EN 10305-6 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
BS EN 13001-3-5:2016 Cranes. General design Limit states and proof of competence of forged hooks
15/30327671 DC : 0 BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
UNE-EN ISO 16120-1:2017 Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017)
16/30292322 DC : 0 BS ISO 19203 - HOT-DIP GALVANIZED AND ZINC-ALUMINIUM COATED HIGH TENSILE STEEL WIRE FOR BRIDGE CABLES - SPECIFICATIONS
BS ISO 11515 : 2013 GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING
BS ISO 6932:2014 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
I.S. EN 4800-007:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
UNE-EN ISO 26203-2:2012 Metallic materials - Tensile testing at high strain rates - Part 2: Servo-hydraulic and other test systems (ISO 26203-2:2011)
17/30348879 DC : 0 BS ISO 1083 - SPHEROIDAL GRAPHITE CAST IRONS - CLASSIFICATION
EN 13601:2013 Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
BS ISO 9349:2017 Ductile iron pipes, fittings, accessories and their joints. Thermal preinsulated products
16/30258515 DC : 0 BS EN 13674-4 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M
API 20A : 2017 CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY
BS ISO 4998:2014 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality
ISO 9154:2016 Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Procurement specification
DIN EN 16482:2014-09 FOUNDING - CONTINUOUS CAST IRON BARS
I.S. EN ISO 9809-1:2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
UNI EN 10270-3 : 2011 STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE
UNI EN ISO 9809-2 : 2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
UNI EN ISO 5755 : 2012 SINTERED METAL MATERIALS - SPECIFICATIONS
EN 12449:2016 Copper and copper alloys - Seamless, round tubes for general purposes
PREN 10025-1 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
PREN 14276-1 : DRAFT 2017 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
PREN 4700-002 : 200P3 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
UNE-EN ISO 18592:2010 Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens (ISO 18592:2009)
UNI EN 4800-002 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
I.S. EN 16451:2015 RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
I.S. EN 16482:2014 FOUNDING - CONTINUOUS CAST IRON BARS
ISO 9349:2017 Ductile iron pipes, fittings, accessories and their joints — Thermal preinsulated products
ISO 6363-1:2012 Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 1: Technical conditions for inspection and delivery
S.R. CWA 16762:2014 CEN WORKSHOP AGREEMENT - CEN/WS SERES - ICT STANDARDS IN SUPPORT OF AN EREPORTING FRAMEWORK FOR THE ENGINEERING MATERIALS SECTOR
I.S. EN ISO 22068:2014 SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012)
ISO 4996:2014 Hot-rolled steel sheet of high yield stress structural quality
ISO 15630-3:2010 Steel for the reinforcement and prestressing of concrete Test methods Part 3: Prestressing steel
UNE-EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
UNE-EN 12493:2014 LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
I.S. EN ISO 15156-3:2015&LC:2015 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015)
ONORM EN ISO 15630-1 : 2011 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE
ISO 2408:2017 Steel wire ropes — Requirements
I.S. EN 4800-001:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
UNE-EN 13445-2:2015 Unfired pressure vessels - Part 2: Materials
I.S. EN ISO 4136:2012 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TRANSVERSE TENSILE TEST (ISO 4136:2012)
BS EN 10263-1:2017 Steel rod, bars and wire for cold heading and cold extrusion General technical delivery conditions
I.S. EN 4800-008:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS
ISO 683-5:2017 Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels
I.S. EN ISO 7866:2012 GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012)
UNI EN ISO 6892-2 : 2011 METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE
ISO 16112:2017 Compacted (vermicular) graphite cast irons — Classification
ISO 9328-1:2018 Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements
EN 1092-1:2018 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
I.S. EN 4700-004:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE
UNE-EN ISO 4136:2013 Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
ISO 4991:2015 Steel castings for pressure purposes
ISO 15211:2012 Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel
UNI EN 16019 : 2014 RAILWAY APPLICATIONS - AUTOMATIC COUPLER - PERFORMANCE REQUIREMENTS, SPECIFIC INTERFACE GEOMETRY AND TEST METHOD
ISO 6362-2:2014 Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
16/30258472 DC : 0 BS EN 14811 - RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION
EN 12493:2013+A1:2014/AC:2015 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
17/30353548 DC : 0 BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS
BS EN ISO 15630-2:2010 Steel for the reinforcement and prestressing of concrete. Test methods Welded fabric
17/30346732 DC : 0 BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS
ISO 13270:2013 Steel fibres for concrete — Definitions and specifications
NF EN ISO 15630-2 : 2010 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC
DIN EN ISO 15630-1 E : 2011 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE
17/30362692 DC : 0 BS EN 598 - COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS
UNE-EN ISO 17296-3:2017 Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014)
ASTM F 3184 : 2016 Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion
PREN 10149-1 : DRAFT 2011 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS
I.S. EN 50525-2-11:2011 ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-11: CABLES FOR GENERAL APPLICATIONS - FLEXIBLE CABLES WITH THERMOPLASTIC PVC INSULATION
I.S. EN 16079:2011 FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS
ISO 12633-1:2011 Hot-finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions
ISO 16143-3:2014 Stainless steels for general purposes Part 3: Wire
BS EN 13674-4 : 2006 RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M
ONORM EN 13674-2 : 2012 RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
ISO 630-1:2011 Structural steels Part 1: General technical delivery conditions for hot-rolled products
I.S. EN ISO 18592:2009 RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - METHOD FOR THE FATIGUE TESTING OF MULTI-SPOT-WELDED SPECIMENS
KTA 3206 : 2014(R2017)Berichtigung:2019 BREAK PRECLUSION VERIFICATIONS FOR PRESSURE-RETAINING COMPONENTS IN NUCLEAR POWER PLANTS
DIN EN ISO 15630-3 E : 2011 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
DIN EN 1561:2012-01 Founding - Grey cast irons; German version EN 1561:2011
I.S. EN ISO 15630-1:2010 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE
ISO 15630-2:2010 Steel for the reinforcement and prestressing of concrete Test methods Part 2: Welded fabric
I.S. EN ISO 7500-1:2018 METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION -TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCEMEASURING SYSTEM (ISO 7500-1:2018)
S.R. CWA 16200:2010 A GUIDE TO THE DEVELOPMENT AND USE OF STANDARDS COMPLIANT DATA FORMATS FOR ENGINEERING MATERIALS TEST DATA
ISO 20805:2017 Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming
ISO 5832-4:2014 Implants for surgery — Metallic materials — Part 4: Cobalt-chromium-molybdenum casting alloy
I.S. EN 485-2:2016 ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES
DIN EN 764-4:2015-03 PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
ONORM EN ISO 9809-1 : 2010 GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
DIN EN 13601:2013-09 Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
DIN EN 12952-2:2011-10 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
DIN EN 12952-5:2012-01 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
DIN EN ISO 10451:2010-11 Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010)
DIN EN 13600:2013-09 Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2013
DIN EN 10216-1:2014-03 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
BS EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
ISO 6892-3:2015 Metallic materials Tensile testing Part 3: Method of test at low temperature
BS EN 10088-2:2014 Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
UNE-EN ISO 7441:2015 Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric exposure corrosion tests (ISO 7441:2015)
ISO 28781:2010 Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment
UNE-EN 12735-1:2016 Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
UNE-EN ISO 22674:2016 Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016)
BS EN 1977:2013 Copper and copper alloys. Copper drawing stock (wire rod)
UNE-EN 755-2:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
ISO 11439:2013 Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
UNE-EN 1561:2012 Founding - Grey cast irons
BS EN 10216-1:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties
BS EN 10268 : 2006 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
UNE-EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
BS EN ISO 15136-1:2001 Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps
BS EN 14893:2014 LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
UNE-EN 10222-1:2017 Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
BS EN ISO 15841:2014 Dentistry. Wires for use in orthodontics
BS EN ISO 15614-13:2012 Specification and qualification of welding procedures for metallic materials. Welding procedure test Upset (resistance butt) and flash welding
BS EN 12842:2012 Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods
BS EN 10305-4:2016 Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes for hydraulic and pneumatic power systems
BS EN ISO 18265:2013 Metallic materials. Conversion of hardness values
BS EN 12952-2:2011 Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories
BS EN 10222-1:2017 Steel forgings for pressure purposes General requirements for open die forgings
ISO/ASTM 52921:2013 Standard terminology for additive manufacturing — Coordinate systems and test methodologies
BS EN 10028-1:2017 Flat products made of steels for pressure purposes General requirements
BS EN 13094:2015 Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction
BS EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
BS EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions
BS EN ISO 7711-2:2011 Dentistry. Rotary diamond instruments Discs
BS EN 13110 : 2012 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
IEC 62047-9:2011 Semiconductor devices - Micro-electromechanical devices - Part 9: Wafer to wafer bonding strength measurement for MEMS
ONORM EN 12952-2 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
EN ISO 5832-3:2016 Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2016)
EN 10216-4:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
EN 10305-1:2016 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
EN 10270-3:2011 Steel wire for mechanical springs - Part 3: Stainless spring steel wire
EN 13148 : 2010 COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP
UNI EN ISO 11439 : 2013 GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES
EN 61788-6:2011 SUPERCONDUCTIVITY - PART 6: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF CU/NB-TI COMPOSITE SUPERCONDUCTORS
EN 10303:2015 Thin magnetic steel strip and sheet for use at medium frequencies
EN 12450:2012 Copper and copper alloys - Seamless, round copper capillary tubes
EN 10294-2:2012 Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties
EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
EN 1172:2011 Copper and copper alloys - Sheet and strip for building purposes
EN 10338:2015 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
EN 12452:2012 Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
EN 10216-3:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
EN 131-2:2010+A2:2017 Ladders - Part 2: Requirements, testing, marking
DIN EN 10294-2:2012-04 Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties
DIN EN 10305-4:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS
DIN EN 14140:2017-01 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
DIN EN 545:2011-09 Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
EN 12732:2013+A1:2014 Gas infrastructure - Welding steel pipework - Functional requirements
EN 62047-9:2011 Semiconductor devices - Micro-electromechanical devices - Part 9: Wafer to wafer bonding strength measurement for MEMS
EN 13749:2011 Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames
DIN EN 14359:2017-09 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
DIN EN ISO 898-2:2012-08 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)
EN 61788-19:2014 Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors
EN 50525-2-11:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation
DIN EN 14353:2017-09 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN ISO 15614-13 : 2012 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING
ONORM EN 16079 : 2012 FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS
ONORM EN 1561 : 2011 FOUNDING - GREY CAST IRONS
UNE-EN 12732:2014 Gas infrastructure - Welding steel pipework - Functional requirements
UNE-EN 10270-1:2012 Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire
UNE-EN 14276-1:2007 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements

SEP 1235 : 2012 BESTIMMUNG DES ELASTIZITAETSMODULS AN STAHL IM ZUGVERSUCH BEI RAUMTEMPERATUR
ISO/TTA 2:1997 Tensile tests for discontinuously reinforced metal matrix composites at ambient temperatures
ISO 2566-2:1984 Steel Conversion of elongation values Part 2: Austenitic steels
ISO 3183:2012 Petroleum and natural gas industries Steel pipe for pipeline transportation systems
ISO 9513:2012 Metallic materials — Calibration of extensometer systems used in uniaxial testing
ASTM E 8M : 2004 Standard Test Methods for Tension Testing of Metallic Materials [Metric] (Withdrawn 2008)
ISO/TR 25679:2005 Mechanical testing of metals Symbols and definitions in published standards
ISO 2566-1:1984 Steel Conversion of elongation values Part 1: Carbon and low alloy steels
ISO 80000-1:2009 Quantities and units — Part 1: General
ASTM E 111 : 2017 : REDLINE Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
ISO 7500-1:2015 Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system
SAC GB/T 228 : 2002 METALLIC MATERIALS - TENSILE TESTING AT AMBIENT TEMPERATURE
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
EN 10291 : 2000 METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST
ISO 11960:2014 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)

View more information
US$73.00
Excluding Tax where applicable