ISO 6892-2:2011
Withdrawn
Withdrawn
View Superseded by
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
Available format(s)
Hardcopy , PDF
Language(s)
English, French, Russian
Published date
02-09-2011
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO 6892-2:2011 specifies a method of tensile testing of metallic materials at temperatures higher than room temperature.
| Committee |
ISO/TC 164/SC 1
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| BS EN ISO 6892-2:2011 | Equivalent |
| I.S. EN ISO 6892-2:2011 | Equivalent |
| DIN EN ISO 6892-2:2011-05 | Equivalent |
| DIN EN ISO 6892-2:2011-05 | Identical |
| UNE-EN ISO 6892-2:2011 | Identical |
| NBR ISO 6892-2 : 2013 | Identical |
| BS EN ISO 6892-2:2011 | Identical |
| I.S. EN ISO 6892-2:2011 | Identical |
| SAC GB/T 228-2 : 2015 | Identical |
| NF EN ISO 6892-2 : 2011 | Identical |
| NEN EN ISO 6892-2 : 2011 | Identical |
| EN ISO 6892-2:2011 | Identical |
| PN EN ISO 6892-2 : 2011 | Identical |
| NBN EN ISO 6892-2 : 2011 | Identical |
| NS EN ISO 6892-2 : 2011 | Identical |
| 17/30347199 DC : 0 | BS EN ISO 204 - METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| BS ISO 4991:2015 | Steel castings for pressure purposes |
| 12/30250149 DC : 0 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
| 13/30290101 DC : 0 | BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| BS EN 15566:2016 | Railway applications. Railway rolling stock. Draw gear and screw coupling |
| 17/30363845 DC : 0 | BS ISO 21927-3 - SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS |
| PREN 10207 : DRAFT 2015 | STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| 15/30317351 DC : 0 | BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| BS ISO 20032:2013 | Method for evaluation of tensile properties of metallic superplastic materials |
| 11/30191086 DC : 0 | BS ISO 12633-1 - HOT-FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| PREN 10028-1 : DRAFT 2014 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| ISO 9328-1:2018 | Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements |
| ISO 13583-1:2015 | Centrifugally cast steel and alloy products — Part 1: General testing and tolerances |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
| I.S. EN 10216-2:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| BS EN 13480-8:2017 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| BS EN 13480-8:2017+A1:2019 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| BS EN 10216-2:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN 12101-3:2015 | Smoke and heat control systems Specification for powered smoke and heat control ventilators (Fans) |
| BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| BS EN 10272:2007 | Stainless steel bars for pressure purposes |
| I.S. EN 10222-1:2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS FOR OPEN DIE FORGINGS |
| EN 12101-3:2015 | Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
| EN 12952-2:2011 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 10314:2016 | Method for the derivation of minimum values of proof strength of steel at elevated temperatures |
| EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| EN 10272:2016 | Stainless steel bars for pressure purposes |
| EN 10207:2017 | Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars |
| EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| 11/30191093 DC : 0 | BS ISO 10799-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| 17/30352962 DC : 0 | BS EN ISO 15630-1 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
| 12/30270633 DC : 0 | BS EN 10222-1 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| 13/30252100 DC : 0 | BS ISO 4990 - STEEL CASTINGS - GENERAL TECHNICAL DELIVERY REQUIREMENTS |
| DIN EN ISO 4136:2013-02 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
| 11/30253751 DC : 0 | BS EN 10269 - STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| EN 4700-002:2016 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
| BS ISO 16143-1:2014 | Stainless steels for general purposes Corrosion-resistant flat products |
| PREN 10253-4 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| PREN 10088-2 : DRAFT 2011 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| BS ISO 12891-2:2014 | Retrieval and analysis of surgical implants Analysis of retrieved surgical implants |
| BS ISO 404:2013 | Steel and steel products. General technical delivery requirements |
| I.S. EN 4700-002:2016 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| PREN 764-4 : DRAFT 2012 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| PREN 10272 : DRAFT 2013 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| ISO 16143-1:2014 | Stainless steels for general purposes — Part 1: Corrosion-resistant flat products |
| ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| DIN EN 10216-5:2014-03 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| DIN EN 12101-3:2015-12 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
| DIN EN 10269:2014-02 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| DIN EN 10216-2:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DIN EN 1559-2:2014-12 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| I.S. EN 10273:2016 | HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| I.S. EN 10314:2016 | METHOD FOR THE DERIVATION OF MINIMUM VALUES OF PROOF STRENGTH OF STEEL AT ELEVATED TEMPERATURES |
| I.S. EN 10216-3:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| DIN EN 10028-1:2017-10 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 10216-5:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| I.S. EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| I.S. EN 10217-7:2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| DIN EN 10088-2:2014-12 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| I.S. EN 12101-3:2015 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
| I.S. EN 10269:2013 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| I.S. EN 12952-2:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| I.S. EN 1559-2:2014 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2 - ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| I.S. EN 10272:2016&LC:2016 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| I.S. EN 13480-8:2017&LC:2019 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| I.S. EN 10088-3:2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| DIN EN 10088-3:2014-12 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| I.S. EN 764-4:2014 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| I.S. EN 10028-1:2017 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| VDI 2700 Blatt 14:2011-09 | Securing of loads on road vehicles - Determination of coefficients of friction |
| VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
| 17/30346747 DC : 0 | BS ISO 9328-1 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL REQUIREMENTS |
| 12/30259070 DC : 0 | BS EN 764-4 - PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| 13/30288578 DC : 0 | BS EN 10314 - METHOD FOR THE DERIVATION OF MINIMUM VALUES OF PROOF STRENGTH OF STEEL AT ELEVATED TEMPERATURES |
| I.S. EN 15566:2016 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| BS EN 4700-002:2016 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
| 11/30254171 DC : 0 | BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| BS EN 4800-006:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production forgings |
| BS ISO 4990:2015 | Steel castings. General technical delivery requirements |
| 13/30288572 DC : 0 | BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| BS EN 4800-005:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Forging stock |
| 13/30288575 DC : 0 | BS EN 10273 - HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 17/30312468 DC : 0 | BS ISO 15461 - STEEL FORGINGS - TESTING FREQUENCY, SAMPLING CONDITIONS AND TEST METHODS FOR MECHANICAL TESTS |
| PREN 10222-1 : DRAFT 2012 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| ASTM F 3122 : 2014 | Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
| ISO 15461:2018 | Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| PREN 1559-2 : DRAFT 2012 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| DIN EN 10216-3:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| BS EN 10217-7:2014 | Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
| 11/30212253 DC : 0 | BS ISO 14604 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS OF TEST FOR CERAMIC COATINGS - DETERMINATION OF FRACTURE STRAIN |
| 13/30252103 DC : 0 | BS ISO 4991 - STEEL CASTINGS FOR PRESSURE PURPOSES |
| BS ISO 16143-2:2014 | Stainless steels for general purposes Corrosion-resistant semi-finished products, bars, rods and sections |
| EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| 13/30252127 DC : 0 | BS ISO 13583-1 - CENTRIFUGALLY CAST STEEL AND ALLOY PRODUCTS - PART 1: GENERAL TESTING AND TOLERANCES |
| NACE TM 03 16 : 2016 | FOUR-POINT BEND TESTING OF MATERIALS FOR OIL AND GAS APPLICATIONS |
| 12/30266615 DC : 0 | BS EN 1559-2 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| 12/30266422 DC : DRAFT JULY 2012 | BS EN ISO 4136 - DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TRANSVERSE TENSILE TEST |
| 12/30250146 DC : 0 | BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS |
| 11/30254168 DC : 0 | BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| BS ISO 16540:2015 | Corrosion of metals and alloys. Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method |
| 13/30242622 DC : 0 | BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
| ISO 10799-1:2011 | Cold-formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
| I.S. EN 10207:2017 | STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| PREN 10269 : DRAFT 2011 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| PREN 10273 : DRAFT 2013 | HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| BS EN 10207:2017 | Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars |
| ISO 20032:2013 | Method for evaluation of tensile properties of metallic superplastic materials |
| ISO 16143-2:2014 | Stainless steels for general purposes — Part 2: Corrosion-resistant semi-finished products, bars, rods and sections |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| DIN EN 10217-7:2015-01 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| DIN EN 10314:2016-10 | METHOD FOR THE DERIVATION OF MINIMUM VALUES OF PROOF STRENGTH OF STEEL AT ELEVATED TEMPERATURES |
| DIN EN 10272:2016-10 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| BS EN 1559-2:2014 | Founding. Technical conditions of delivery Additional requirements for steel castings |
| BS EN 10216-5:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| BS EN 10216-3:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
| BS EN 10314:2002 | Method for the derivation of minimum values of proof strength of steel at elevated temperatures |
| BS EN 764-4:2014 | Pressure equipment Establishment of technical delivery conditions for metallic materials |
| BS EN 10088-3:2014 | Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| ISO 4136:2012 | Destructive tests on welds in metallic materials — Transverse tensile test |
| EN 15566:2016 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| EN ISO 4136:2012 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
| EN 4800-006:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings |
| EN 4800-005:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock |
| EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| EN 764-4:2014 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
| PREN 10253-2 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| BS ISO 13583-1:2015 | Centrifugally cast steel and alloy products General testing and tolerances |
| 14/30312182 DC : 0 | BS EN 10028-1 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| PREN 10088-3 : DRAFT 2011 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 15/30331537 DC : 0 | BS EN 10207 - STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| BS EN ISO 4136:2012 | Destructive tests on welds in metallic materials. Transverse tensile test |
| ISO 4990:2015 | Steel castings — General technical delivery requirements |
| ISO 16540:2015 | Corrosion of metals and alloys — Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method |
| I.S. EN ISO 4136:2012 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TRANSVERSE TENSILE TEST (ISO 4136:2012) |
| ISO 9725:2017 | Nickel and nickel alloy forgings |
| ISO 4991:2015 | Steel castings for pressure purposes |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| ISO 12633-1:2011 | Hot-finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
| KTA 3206 : 2014(R2017)Berichtigung:2019 | BREAK PRECLUSION VERIFICATIONS FOR PRESSURE-RETAINING COMPONENTS IN NUCLEAR POWER PLANTS |
| DIN EN 764-4:2015-03 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| DIN EN 12952-2:2011-10 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| BS EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| BS EN 10222-1:2017 | Steel forgings for pressure purposes General requirements for open die forgings |
| BS EN 12952-2:2011 | Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories |
| BS EN 10028-1:2017 | Flat products made of steels for pressure purposes General requirements |
| BS EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| EN 10216-3:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| UNE-EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| UNE-EN 10216-3:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| UNE-EN 15566:2017 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| UNE-EN 12101-3:2016 | Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
| UNE-EN 10314:2016 | Method for the derivation of minimum values of proof strength of steel at elevated temperatures |
| UNE-EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| UNE-EN 10088-2:2015 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| UNE-EN 10272:2016 | Stainless steel bars for pressure purposes |
| UNE-EN 764-4:2015 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
| UNE-EN ISO 4136:2013 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
| UNE-EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| UNE-EN 10216-2:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| UNE-EN 10088-3:2015 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| UNE-EN 10216-5:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| UNE-EN 10269:2014 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| UNE-EN 12952-2:2012 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| UNE-EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.