ISO 717-1:2013
Withdrawn
Withdrawn
View Superseded by
Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
02-19-2013
Withdrawn date
07-16-2021
Superseded by
US$96.00
Excluding Tax where applicable
ISO 717-1:2013: a) defines single-number quantities for airborne sound insulation in buildings and of building elements such as walls, floors, doors, and windows; b) takes into consideration the different sound level spectra of various noise sources such as noise sources inside a building and traffic outside a building; c) gives rules for determining these quantities from the results of measurements carried out in one-third-octave or octave bands in accordance with ISO 10140-2, ISO 140-4, and ISO 140-5.
The single-number quantities in accordance with ISO 717-1:2013 are intended for rating airborne sound insulation and for simplifying the formulation of acoustical requirements in building codes. An additional single-number evaluation in steps of 0,1 dB is indicated for the expression of uncertainty (except for spectrum adaptation terms). The required numerical values of the single-number quantities are specified according to varying needs. The single-number quantities are based on results of measurements in one-third-octave bands or octave bands.
For laboratory measurements made in accordance with ISO 10140, single-number quantities should be calculated using one-third-octave bands only.
The rating of results of measurements carried out over an enlarged frequency range is dealt with in an annex.
| Committee |
ISO/TC 43/SC 2
|
| DevelopmentNote |
Supersedes ISO 717-3. (04/2001) Supersedes ISO/DIS 717-1. (02/2013)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN ISO 717-1 : 2013 | Identical |
| NEN EN ISO 717-1 : 2013 | Identical |
| NS EN ISO 717-1 : 2013 | Identical |
| I.S. EN ISO 717-1:2013 | Identical |
| PN EN ISO 717-1 : 2013 | Identical |
| SS-EN ISO 717-1 : 2013 | Identical |
| EN ISO 717-1:2013 | Identical |
| BS EN ISO 717-1:2013 | Identical |
| DIN EN ISO 717-1:2013-06 | Identical |
| NF EN ISO 717-1 : 2013 | Identical |
| UNE-EN ISO 717-1:2013 | Identical |
| BS EN ISO 12354-3:2017 | Building acoustics. Estimation of acoustic performance of buildings from the performance of elements Airborne sound insulation against outdoor sound |
| 14/30313892 DC : 0 | BS EN ISO 10140-1 - ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS |
| 11/30213807 DC : 0 | BS ISO 14486 - LAMINATE FLOOR COVERINGS - LAMINATE FLOOR COVERING - SPECIFICATION |
| ISO/PAS 16940:2004 | Glass in building — Glazing and airborne sound insulation — Measurement of the mechanical impedance of laminated glass |
| I.S. EN 12354-2:2000 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 2: IMPACT SOUND INSULATION BETWEEN ROOMS |
| BS EN 14509:2013 | Self-supporting double skin metal faced insulating panels. Factory made products. Specifications |
| 15/30328765 DC : 0 | BS EN 12602 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| I.S. EN ISO 140-3:1996 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - LABORATORY MEASUREMENT OF AIRBORNE SOUND INSULATION OF BUILDING ELEMENTS |
| 11/30251988 DC : 0 | BS EN 14190 - GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 15283-2:2009-12 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards (includes Amendment A1:2009) |
| 16/30334502 DC : 0 | BS EN ISO 12354-3 - BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 3: AIRBORNE SOUND INSULATION AGAINST OUTDOOR SOUND |
| PREN 13279-1 : DRAFT 2017 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| BS EN 1090-5:2017 | Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| 08/30171552 DC : DRAFT JAN 2008 | BS EN 13279-1 - GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 14509:2013-12 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| DIN EN 13141-11:2015-07 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS |
| 08/30087642 DC : 0 | ISO 10140-1 - ACOUSTICS LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: TEST CODES |
| PD CEN/TR 15226:2006 | Building products. Treatment of acoustics in product technical specifications |
| PD CEN/TS 16354:2013 | Laminate floor coverings. Underlays. Specification, requirements and test methods |
| DIN EN 15037-3:2011-07 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks (includes Amendment A1:2011) |
| 17/30313376 DC : DRAFT SEP 2017 | BS ISO 19916-1 - GLASS IN BUILDING - VACUUM INULATING GLASS - PART 1: BASIC SPECIFICATION OF PRODUCTS AND EVALUATION METHODS FOR THERMAL AND SOUND INSULATING PERFORMANCE |
| I.S. EN ISO 10848-2:2017 | ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING RMS - PART 2: APPLICATION TO TYPE B ELEMENTS WHEN THE JUNCTION HAS A SMALL INFLUENCE (ISO 10848-2:2017) |
| 14/30280953 DC : 0 | BS ISO 18642 - FERTILIZER AND SOIL CONDITIONERS - FERTILIZER GRADE UREA - GENERAL REQUIREMENTS |
| ISO 12354-1:2017 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 1: Airborne sound insulation between rooms |
| I.S. EN ISO 12354-2:2017 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 2: IMPACT SOUND INSULATION BETWEEN ROOMS (ISO 12354-2:2017) |
| BS EN 16153 : 2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 16283-1 : 2014 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION |
| EN ISO 10848-3:2017 | Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 3: Application to Type B elements when the junction has a substantial influence (ISO 10848-3:2017) |
| PREN 12602 : DRAFT 2015 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| I.S. CEN/TR 15226:2006 | BUILDING PRODUCTS - TREATMENT OF ACOUSTICS IN PRODUCT TECHNICAL SPECIFICATIONS |
| I.S. EN 14963:2006 | ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 10140-5:2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT (ISO 10140-5:2010) |
| I.S. EN 12758:2011 | GLASS IN BUILDING - GLAZING AND AIRBORNE SOUND INSULATION - PRODUCT DESCRIPTIONS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 10052:2010-10 | Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2004 + Amd 1:2010) (includes Amendment A1:2010) |
| BS EN 12758:2011 | Glass in building. Glazing and airborne sound insulation. Product descriptions and determination of properties |
| BS EN ISO 15186-1:2003 | Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity Laboratory measurements |
| BS EN 13141-2:2010 | Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust and supply air terminal devices |
| BS EN 438-7:2005 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| BS EN ISO 11957:2009 | Acoustics. Determination of sound insulation performance of cabins. Laboratory and in situ measurements |
| BS EN ISO 11690-2:1997 | Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control measures |
| BS EN 520 : 2004 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS EN ISO 15667:2000 | Acoustics. Guidelines for noise control by enclosures and cabins |
| BS EN 14964:2006 | Rigid underlays for discontinuous roofing. Definitions and characteristics |
| DIN EN ISO 140-16:2006-11 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 16: LABORATORY MEASUREMENT OF THE SOUND REDUCTION INDEX IMPROVEMENT BY ADDITIONAL LINING |
| DIN EN 13815:2006-12 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| CEN/TS 16354:2013 | Laminate floor coverings - Underlays - Specification, requirements and test methods |
| DIN EN 13241-1:2004-04 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS |
| DIN EN ISO 11957:2010-01 | Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
| EN ISO 12354-2:2017 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms (ISO 12354-2:2017) |
| EN 13141-11:2015 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units |
| EN 13141-8:2014 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room |
| DIN EN 13830:2015-07 | CURTAIN WALLING - PRODUCT STANDARD |
| DIN EN 1090-5:2017-07 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| EN 13141-2:2010 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| EN 12354-1:2000 | Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms |
| EN 12354-3:2000 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound |
| EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
| EN 12781:2001 | Wallcoverings - Specification for cork panels |
| EN 12758:2011 | Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties |
| CEN/TR 15226:2006 | Building products - Treatment of acoustics in product technical specifications |
| EN 12859:2011 | Gypsum blocks - Definitions, requirements and test methods |
| DIN EN 13915:2017-09 | PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| EN ISO 12354-3:2017 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound (ISO 12354-3:2017) |
| EN 13241:2003+A2:2016 | Industrial, commercial, garage doors and gates - Product standard, performance characteristics |
| EN ISO 17624:2004 | Acoustics - Guidelines for noise control in offices and workrooms by means of acoustical screens (ISO 17624:2004) |
| BS EN 15283-1 : 2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
| DIN EN 16309:2014-12 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| 13/30266550 DC : 0 | BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| 10/30218654 DC : 0 | BS EN 12859 - GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS EN ISO 10140-2:2010 | Acoustics. Laboratory measurement of sound insulation of building elements Measurement of airborne sound insulation |
| 08/30178840 DC : DRAFT AUG 2008 | BS EN 15037-3 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
| I.S. EN 12354-3:2000 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 3: AIRBORNE SOUND INSULATION AGAINST OUTDOOR SOUND |
| 16/30334498 DC : 0 | BS EN ISO 12354-2 - BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 2: IMPACT SOUND INSULATION BETWEEN ROOMS |
| DIN EN ISO 16283-3:2016-09 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: FAADE SOUND INSULATION (ISO 16283-3:2016) |
| BS EN 16309 : 2014 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| I.S. EN ISO 16283-1:2014 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION (ISO 16283-1:2014) |
| I.S. EN 15283-1:2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
| PREN 14351-2 : DRAFT 2014 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS |
| DIN EN 12602:2015-12 (Draft) | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| 16/30334494 DC : 0 | BS EN ISO 12354-1 - BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS |
| 01/563076 DC : DRAFT AUG 2001 | BS EN ISO 17624 - ACOUSTICS - GUIDELINES FOR NOISE CONTROL IN OFFICES AND WORKROOMS BY MEANS OF ACOUSTICAL SCREENS |
| 10/30218985 DC : DRAFT JUNE 2010 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| 00/565268 DC : DRAFT NOV 2000 | BS EN ISO 10052 - ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF EQUIPMENT SOUND - SURVEY METHOD |
| BS EN ISO 12354-2:2017 | Building acoustics. Estimation of acoustic performance of buildings from the performance of elements Impact sound insulation between rooms |
| 08/30175518 DC : DRAFT SEP 2008 | BS EN 13141-2 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
| BS EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
| 08/30087646 DC : 0 | ISO 10140-2 - ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 2: MEASUREMENT OF AIRBORNE SOUND INSULATION |
| PREN 14374 : DRAFT 2016 | TIMBER STRUCTURES - LAMINATED VENEER LUMBER (LVL) - REQUIREMENTS |
| ISO 15712-3:2005 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 3: Airborne sound insulation against outdoor sound |
| BS EN 15037-3 : 2009 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
| BS EN 13369:2013 | Common rules for precast concrete products |
| BS EN 16361 : 2013 | POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOORSETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION |
| BS EN ISO 10140-1 : 2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS |
| ISO 22897:2003 | Glass in building — Glazing and airborne sound insulation — Product descriptions and determination of properties |
| I.S. EN ISO 10052:2005 | ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD |
| I.S. EN 16309:2014 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| I.S. EN 16361:2013 | POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOORSETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION |
| EN ISO 12354-1:2017 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms (ISO 12354-1:2017) |
| DIN EN 13279-1:2008-11 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 1520:2011-06 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| DIN EN ISO 17624:2005-03 | Acoustics - Guidelines for noise control in offices and workrooms by means of acoustical screens (ISO 17624:2004) |
| DIN EN 13141-8:2014-09 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room |
| DIN EN 14964:2007-01 | RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS |
| DIN EN 14246:2006-09 | Gypsum elements for suspended ceilings - Definitions, requirements and test methods |
| DIN EN 15318:2008-01 | Design and application of gypsum blocks |
| BS EN 13241-1 : 2003 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS |
| BS EN ISO 11546-1:1996 | Acoustics. Determination of sound insulation performances of enclosures Measurements under laboratory conditions (for declaration purposes) |
| I.S. EN 13830:2015 | CURTAIN WALLING - PRODUCT STANDARD |
| I.S. EN 14351-1:2006 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND/OR SMOKE LEAKAGE CHARACTERISTICS |
| DIN EN 12758:2011-04 | GLASS IN BUILDING - GLAZING AND AIRBORNE SOUND INSULATION - PRODUCT DESCRIPTIONS AND DETERMINATION OF PROPERTIES |
| I.S. EN ISO 11957:2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCE OF CABINS - LABORATORY AND IN SITU MEASUREMENTS |
| DIN EN ISO 2603:2017-03 | Simultaneous interpreting - Permanent booths - Requirements (ISO 2603:2016) |
| I.S. EN 13141-8:2014 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 8: PERFORMANCE TESTING OF UN-DUCTED MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR A SINGLE ROOM |
| I.S. EN 1520:2011 | PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT |
| I.S. EN 13915:2017 | PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 13141-2:2010-12 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| DIN EN 12602:2016-12 | Prefabricated reinforced components of autoclaved aerated concrete |
| I.S. EN 520:2005 | GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 11546-2:2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES) |
| I.S. EN ISO 11546-1:2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES) |
| I.S. EN 13141-2:2010 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
| I.S. EN 12781:2001 | WALLCOVERINGS - SPECIFICATION FOR CORK PANELS |
| I.S. EN 13964:2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12859:2011 | GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| VDI 4100:2012-10 | Sound insulation between rooms in buildings - Dwellings - Assessment and proposals for enhanced sound insulation between rooms |
| VDI 3755:2015-01 | Sound insulation and sound absorption of suspended ceilings |
| VDI 3803 Blatt 2:2017-09 (Draft) | Ventilation and air conditioning - Structural and technical principles - Decentralized ventilation units (VDI ventilation code of practice) |
| DIN EN 16286-2:2013-09 | Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
| 17/30342985 DC : 0 | BS ISO 19488 - ACOUSTICS - ACOUSTIC CLASSIFICATION OF DWELLINGS |
| BS EN ISO 10140-5:2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT |
| DIN EN ISO 12354-1:2016-03 (Draft) | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS (ISO 12354-1:2017) |
| I.S. EN ISO 140-12:2000 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR |
| 14/30293183 DC : 0 | BS EN 16703 - ACOUSTICS - TEST CODE FOR DRYWALL SYSTEMS OF PLASTERBOARD WITH STEEL STUDS - AIRBORNE SOUND INSULATION |
| BS EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods |
| DIN EN 15283-1:2009-12 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement (includes Amendment A1:2009) |
| BS 2750-9:1987 | Measurement of sound insulation in buildings and of building elements. Method for laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it. |
| 05/30138009 DC : DRAFT AUG 2005 | EN 15319 - GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS |
| DIN EN 14963:2006-12 | Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods; German version EN 14963:2006 |
| ISO 16940:2008 | Glass in building — Glazing and airborne sound insulation — Measurement of the mechanical impedance of laminated glass |
| I.S. EN ISO 10848-3:2017 | ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING RMS - PART 3: APPLICATION TO TYPE B ELEMENTS WHEN THE JUNCTION HAS A SUBSTANTIAL INFLUENCE (ISO 10848-3:2017) |
| ISO 6242-3:1992 | Building construction — Expression of users' requirements — Part 3: Acoustical requirements |
| DIN EN 16153:2015-05 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 2603:2016 | SIMULTANEOUS INTERPRETING - PERMANENT BOOTHS - REQUIREMENTS (ISO 2603:2016) |
| I.S. EN ISO 10140-2:2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 2: MEASUREMENT OF AIRBORNE SOUND INSULATION |
| I.S. EN ISO 16283-3:2016 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: FAADE SOUND INSULATION (ISO 16283-3:2016) |
| I.S. EN ISO 12354-1:2017 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS (ISO 12354-1:2017) |
| I.S. EN 16240:2013 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| PREN 16354 : DRAFT 2016 | LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
| ISO 10848-3:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 3: Application to Type B elements when the junction has a substantial influence |
| PREN 14190 : DRAFT 2011 | GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| PREN 14509 : DRAFT 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| EN ISO 10848-1:2017 | Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2017) |
| I.S. EN 13369:2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| PREN 13950 : DRAFT 2011 | GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| PREN 13915 : DRAFT 2016 | PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| EN ISO 10848-2:2017 | Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 2: Application to Type B elements when the junction has a small influence (ISO 10848-2:2017) |
| ISO 9149:2010 | Cork wallcoverings in rolls — Specifications |
| ISO 15712-4:2005 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 4: Transmission of indoor sound to the outside |
| I.S. EN 14509:2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| DIN EN 12859:2011-05 | Gypsum blocks - Definitions, requirements and test methods |
| DIN EN 438-7:2005-04 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005 |
| DIN EN 13915:2016-02 (Draft) | PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 13964:2014-08 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| ISO 11546-1:1995 | Acoustics — Determination of sound insulation performances of enclosures — Part 1: Measurements under laboratory conditions (for declaration purposes) |
| ISO 140-10:1991 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 10: Laboratory measurement of airborne sound insulation of small building elements |
| ISO 140-4:1998 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 4: Field measurements of airborne sound insulation between rooms |
| BS EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| ISO 10140-1:2016 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products |
| EN 13830:2015 | Curtain walling - Product standard |
| EN 14964:2006 | Rigid underlays for discontinuous roofing - Definitions and characteristics |
| DIN EN 13241-1:2011-06 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS |
| EN 15283-1:2008+A1:2009 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement |
| EN 13964:2014 | Suspended ceilings - Requirements and test methods |
| EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| EN 20140-2:1993 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 2: Determination, verification and application of precision data (ISO 140-2:1991) |
| EN ISO 15186-1:2003 | Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1: Laboratory measurements (ISO 15186-1:2000) |
| DIN EN ISO 10140-5 E : 2014 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT (ISO 10140-5:2010 + AMD.1:2014) |
| DIN EN 16240:2014-03 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 16703:2015-12 | ACOUSTICS - TEST CODE FOR DRYWALL SYSTEMS OF PLASTERBOARD WITH STEEL STUDS - AIRBORNE SOUND INSULATION |
| BS EN 13241 : 2003 | INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND GATES - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS |
| BS EN 13141-11:2015 | Ventilation for buildings. Performance testing of components/products for residential ventilation Supply ventilation units |
| ISO 16283-1:2014 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation |
| I.S. EN ISO 140-16:2007 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 16: LABORATORY MEASUREMENT OF THE SOUND REDUCTION INDEX IMPROVEMENT BY ADDITIONAL LINING |
| I.S. EN 12354-4:2000 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 4: TRANSMISSION OF INDOOR SOUND TO THE OUTSIDE |
| PREN 13369 : DRAFT 2017 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| I.S. EN 12354-1:2000 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS |
| 11/30251985 DC : 0 | BS EN 13950 - GYPSUM PLASTERBOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 00/101411 DC : DRAFT FEB 2000 | BS EN 13815 - FIBROUS GYPSUM PLASTER PRODUCTS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 08/30193356 DC : DRAFT DEC 2008 | BS ISO 8724 - CORK DECORATIVE PANELS - SPECIFICATION |
| BS EN ISO 2603:2016 | Simultaneous interpreting. Permanent booths. Requirements |
| DIN 4109-4:2016-07 | Sound insulation in buildings - Part 4: Testing of acoustics in buildings |
| 17/30354748 DC : 0 | BS ISO 20189-1 - ACOUSTICS - SCREENS FURNITURE AND SINGLE OBJECTS INTENDED FOR INTERIOR USE - RATING OF SOUND ABSORPTION AND SOUND REDUCTION OF ELEMENTS BASED ON LABORATORY MEASUREMENTS |
| 13/30217369 DC : 0 | BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| 00/107014 DC : DRAFT OCT 2000 | PREN 520 - GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 00/106800 DC : DRAFT OCT 2000 | PREN 13915 - PREFABRICATED GYPSUM WALLBOARD PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS ISO 15186-2 : 2003 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS USING SOUND INTENSITY - PART 2: FIELD MEASUREMENTS |
| 17/30357433 DC | BS EN 13279-1. Gypsum binders and gypsum plasters. Part 1. Definitions and requirements |
| BS EN ISO 15186-2:2010 | Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity Field measurements |
| 93/108873 DC : DRAFT OCT 1993 | PREN 1168 - FLOOR ON PRECAST PRESTRESSED HOLLOW CORE ELEMENTS |
| 05/30135869 DC : 0 | EN 15283-1 - GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
| BS EN ISO 12354-4:2017 | Building acoustics. Estimation of acoustic performance of buildings from the performance of elements Transmission of indoor sound to the outside |
| 08/30087659 DC : 0 | ISO 10140-5 - ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT |
| I.S. EN 16703:2015 | ACOUSTICS - TEST CODE FOR DRYWALL SYSTEMS OF PLASTERBOARD WITH STEEL STUDS - AIRBORNE SOUND INSULATION |
| I.S. EN ISO 15186-2:2010 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS USING SOUND INTENSITY - PART 2: FIELD MEASUREMENTS |
| BS EN ISO 10848-3:2017 | Acoustics. Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Application to Type B elements when the junction has a substantial influence |
| I.S. EN ISO 12354-3:2017 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 3: AIRBORNE SOUND INSULATION AGAINST OUTDOOR SOUND (ISO 12354-3:2017) |
| PREN 12859 : DRAFT 2010 | GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| EN 13369:2018 | Common rules for precast concrete products |
| ISO 10848-1:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 1: Frame document |
| ISO 15712-1:2005 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 1: Airborne sound insulation between rooms |
| ISO 10848-2:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 2: Application to Type B elements when the junction has a small influence |
| DIN EN ISO 12354-4:2016-03 (Draft) | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 4: TRANSMISSION OF INDOOR SOUND TO THE OUTSIDE (ISO 12354-4:2017) |
| ISO 15712-2:2005 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 2: Impact sound insulation between rooms |
| I.S. EN 13279-1:2008 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| ISO 140-3:1995 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements |
| BS EN ISO 140-4:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of airborne sound insulation between rooms |
| ISO 12354-2:2017 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 2: Impact sound insulation between rooms |
| BS EN 13915:2017 | Prefabricated gypsum plasterboard panels with a cellular paperboard core. Definitions, requirements and test methods |
| BS EN 13815:2006 | Fibrous gypsum plaster casts. Definitions, requirements and test methods |
| ISO 10052:2004 | Acoustics — Field measurements of airborne and impact sound insulation and of service equipment sound — Survey method |
| BS EN 12354-2:2000 | Building acoustics. Estimation of acoustic performance in buildings from the performance of elements Impact sound insulation between rooms |
| BS EN ISO 11546-2:2009 | Acoustics. Determination of sound insulation performances of enclosures Measurements in situ (for acceptance and verification purposes) |
| ISO 12354-3:2017 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 3: Airborne sound insulation against outdoor sound |
| BS EN 14759:2005 | Shutters. Acoustic insulation relative to airborne sound. Expression of performance |
| ISO 140-16:2006 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 16: Laboratory measurement of the sound reduction index improvement by additional lining |
| BS EN ISO 17624:2004 | Acoustics. Guidelines for noise control in offices and workrooms by means of acoustical screens |
| ISO 2603:2016 | Simultaneous interpreting — Permanent booths — Requirements |
| BS EN 12781:2001 | Wallcoverings. Specification for cork panels |
| ISO 15667:2000 | Acoustics — Guidelines for noise control by enclosures and cabins |
| ISO 140-5:1998 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 5: Field measurements of airborne sound insulation of façade elements and façades |
| ISO 11957:1996 | Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements |
| ISO 17624:2004 | Acoustics — Guidelines for noise control in offices and workrooms by means of acoustical screens |
| ISO 16283-3:2016 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 3: Façade sound insulation |
| DIN EN 15319:2007-10 | General principles of design of fibrous (gypsum) plaster works |
| BS EN 14351-1 : 2006 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS |
| ISO 10140-2:2010 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 2: Measurement of airborne sound insulation |
| BS EN 12354-3:2000 | Building acoustics. Estimation of acoustic performance in buildings from the performance of elements Airborne sound insulation against outdoor sound |
| BS EN 13279-1:2008 | Gypsum binders and gypsum plasters Definitions and requirements |
| BS EN 15318:2007 | Design and application of gypsum blocks |
| BS EN ISO 140-16:2006 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurement of the sound reduction index improvement by additional lining |
| BS EN 20140-9:1994 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it |
| BS EN 14246:2006 | Gypsum elements for suspended ceilings. Definitions, requirements and test methods |
| BS EN 13830:2015 | Curtain walling. Product standard |
| ISO 12354-4:2017 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 4: Transmission of indoor sound to the outside |
| BS EN ISO 140-3:1995 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurement of airborne sound insulation of building elements |
| BS EN 12860:2001 | Gypsum based adhesives for gypsum blocks. Definitions, requirements and test methods |
| BS EN 13141-8:2014 | Ventilation for buildings. Performance testing of components/products for residential ventilation Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room |
| BS EN 12859:2011 | Gypsum blocks. Definitions, requirements and test methods |
| BS EN ISO 140-5:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of airborne sound insulation of facade elements and facades |
| ISO 15186-1:2000 | Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 1: Laboratory measurements |
| DIN EN ISO 10140-2:2010-12 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) |
| EN 13241-1:2003+A1:2011 | Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics |
| EN ISO 140-4:1998 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms (ISO 140-4:1998) |
| EN ISO 11957:2009 | Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
| EN ISO 15667:2000 | Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000) |
| EN 16153:2013+A1:2015 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| EN 14963:2006 | Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
| EN 520:2004+A1:2009 | Gypsum plasterboards - Definitions, requirements and test methods |
| EN 15283-2:2008+A1:2009 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards |
| EN 13815:2006 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| EN 14509:2013 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| EN 15318:2007 | Design and application of gypsum blocks |
| EN 20140-9 : 1993 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 9: LABORATORY MEASUREMENTS OF ROOM-TO-ROOM AIRBORNE SOUND INSULATION OF A SUSPENDED CEILING WITH A PLENUM SUSPENDED ABOVE IT |
| EN ISO 140-5:1998 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 5: Field measurements of airborne sound insulation of façade elements and façades (ISO 140-5:1998) |
| EN 14351-1:2006+A2:2016 | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets |
| EN 14759:2005 | Shutters - Acoustic insulation relative to airborne sound - Expression of performance |
| EN 16703:2015 | Acoustics - Test code for drywall systems of plasterboard with steel studs - Airborne sound insulation |
| EN 16309:2014+A1:2014 | Sustainability of construction works - Assessment of social performance of buildings - Calculation methodology |
| EN 13915:2017 | Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods |
| EN ISO 140-12 : 2000 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR |
| EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| EN 20140-10 : 1992 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 10: LABORATORY MEASUREMENT OF AIRBORNE SOUND INSULATION OF SMALL BUILDING ELEMENTS |
| EN 15037-3:2009+A1:2011 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks |
| EN 438-7:2005 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| EN 16286-2:2013 | Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
| EN 16361:2013+A1:2016 | Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation |
| EN ISO 15186-2:2010 | Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 2: Field measurements (ISO 15186-2:2003) |
| EN ISO 11546-2:2009 | Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
| EN ISO 140-16:2006 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 16: Laboratory measurement of the sound reduction index improvement by additional lining (ISO 140-16:2006) |
| EN ISO 11546-1:2009 | Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
| EN ISO 2603:2016 | Simultaneous interpreting - Permanent booths - Requirements (ISO 2603:2016) |
| EN ISO 16283-3:2016 | Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 3: Façade sound insulation (ISO 16283-3:2016) |
| EN 15319:2007 | General principles of design of fibrous (gypsum) plaster works |
| BS EN ISO 16283-3:2016 | Acoustics. Field measurement of sound insulation in buildings and of building elements Façade sound insulation |
| BS EN 14963:2006 | Roof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods |
| 14/30295928 DC : 0 | BS EN ISO 16283-3 - ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: FACADE SOUND INSULATION |
| BS EN ISO 10848-1:2017 | Acoustics. Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Frame document |
| 05/30135872 DC : 0 | EN 15283-2 - GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| I.S. EN 438-7:2005 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| 14/30297827 DC : 0 | BS EN 14351-2 - WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS |
| BS EN ISO 10848-2:2017 | Acoustics. Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Application to Type B elements when the junction has a small influence |
| I.S. EN 16286-2:2013 | RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS |
| 17/30354239 DC : 0 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| BS EN 15283-2 : 2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| BS EN 16286-2:2013 | Railway applications. Gangway systems between vehicles Acoustic measurements |
| EN ISO 10140-2:2010 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) |
| 11/30241418 DC : 0 | BS EN 16286-2 - RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS |
| 16/30344233 DC : 0 | BS EN ISO 10848-4 - MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING ROOMS - PART 4: APPLICATION TO JUNCTIONS WITH AT LEAST ONE TYPE A ELEMENT |
| 16/30334506 DC : 0 | BS EN ISO 12354-4 - BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 4: TRANSMISSION OF INDOOR SOUND TO THE OUTSIDE |
| BS EN 16703:2015 | Acoustics. Test code for drywall systems of plasterboard with steel studs. Airborne sound insulation |
| DIN EN ISO 15186-2:2010-12 | Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 2: Field measurements (ISO 15186-2:2003) |
| I.S. EN ISO 10140-1:2016 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS (ISO/DIS 10140-1:2014) |
| BS EN ISO 12354-1:2017 | Building acoustics. Estimation of acoustic performance of buildings from the performance of elements Airborne sound insulation between rooms |
| DIN EN ISO 12354-3:2016-03 (Draft) | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 3: AIRBORNE SOUND INSULATION AGAINST OUTDOOR SOUND (ISO 12354-3:2017) |
| EN ISO 10140-1:2016 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016) |
| 12/30250454 DC : 0 | BS ISO 16283-1 - ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION |
| 16/30332917 DC : 0 | BS EN 13915 - PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 12/30254325 DC : 0 | BS ISO 17340 - METALLIC MATERIALS - DUCTILITY TESTING - HIGH SPEED COMPRESSION TEST FOR POROUS AND CELLULAR METALS |
| DIN EN ISO 2603:2016-02 (Draft) | SIMULTANEOUS INTERPRETING - PERMANENT BOOTHS - REQUIREMENTS (ISO 2603:2016) |
| NF EN ISO 15186-2 : 2011 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS USING SOUND INTENSITY - PART 2: FIELD MEASUREMENTS |
| 16/30333219 DC : 0 | BS EN 16354 - LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
| ABS 0166 : 2014 | GUIDE FOR COMPLIANCE WITH THE ILO MARITIME LABOUR CONVENTION, 2006 - TITLE 3: REQUIREMENTS |
| PREN 13964 : DRAFT 2013 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13141-11:2015 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS |
| I.S. EN 16153:2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 12354-4:2017 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 4: TRANSMISSION OF INDOOR SOUND TO THE OUTSIDE (ISO 12354-4:2017) |
| DIN EN 13369:2013-08 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| I.S. EN 15283-2:2008 | GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
| I.S. EN 15037-3:2009 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
| I.S. EN 13369:2018 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| S.R. CEN/TS 16354:2013 | LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
| I.S. EN 1090-5:2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| ISO 8724:2009 | Cork decorative panels — Specification |
| I.S. EN ISO 10848-1:2017 | ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING ROOMS - PART 1: FRAME DOCUMENT (ISO 10848-1:2017) |
| I.S. EN 12602:2016 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| DIN EN 520:2009-12 | Gypsum plasterboards - Definitions, requirements and test methods (includes Amendment A1:2009) |
| ISO 15186-2:2003 | Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 2: Field measurements |
| BS EN ISO 10052 : 2004 | ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD |
| BS EN 13085:2001 | Wallcoverings. Specification for cork rolls |
| BS EN 15319:2007 | General principles of design of fibrous (gypsum) plaster works |
| BS EN 12354-1:2000 | Building acoustics. Estimation of acoustic performance in buildings from the performance of elements Airborne sound insulation between rooms |
| BS EN 13964:2014 | Suspended ceilings. Requirements and test methods |
| ISO 140-9:1985 | Acoustics — Measurements of sound insulation in buildings and of building elements — Part 9: Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it |
| ISO 10140-5:2010 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment |
| DIN EN ISO 10140-5:2014-09 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010 + Amd.1:2014) (includes Amendment A1:2014) |
| EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| DIN EN 14759:2005-07 | Shutters - Acoustic insulation relative to airborne sound - Expression of performance |
| EN 12354-4:2000 | Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 4: Transmission of indoor sound to the outside |
| DIN EN ISO 140-3:2005-03 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: LABORATORY MEASUREMENTS OF AIRBORNE SOUND INSULATION OF BUILDING ELEMENTS |
| DIN EN ISO 15186-1:2003-12 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS USING SOUND INTENSITY - PART 1: LABORATORY MEASUREMENTS |
| EN ISO 12354-4:2017 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 4: Transmission of indoor sound to the outside (ISO 12354-4:2017) |
| EN 13279-1:2008 | Gypsum binders and gypsum plasters - Part 1: Definitions and requirements |
| EN 12354-2:2000 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms |
| DIN EN ISO 11546-2:2010-01 | Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
| DIN EN ISO 11546-1:2010-01 | Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
| EN 13085:2001 | Wallcoverings - Specification for cork rolls |
| I.S. EN 14246:2006 | GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| NBR 15141 : 2008 | OFFICE FURNITURES - MODULAR PARTITION - CEILING FLOOR TYPE |
| I.S. EN 12860:2001 | GYPSUM BASED ADHESIVES FOR GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNE-EN 15037-3:2010 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks |
| I.S. EN 13241-1:2003 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS |
| UNE-EN 15319:2012 | General principles of design of fibrous (gypsum) plaster works |
| NBR 15575-5 : 2013 | RESIDENTIAL BUILDINGS - PERFORMANCE - PART 5: REQUIREMENTS FOR ROOFING SYSTEMS |
| UNE-EN 13815:2012 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| UNE-EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| NBR 15575-4 : 2013 | RESIDENTIAL BUILDINGS - PERFORMANCE - PART 4: REQUIREMENTS FOR INTERNAL AND EXTERNAL WALL SYSTEMS |
| UNE-EN ISO 15186-2:2011 | Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 2: Field measurements (ISO 15186-2:2003) |
| UNE-EN ISO 10140-1:2016 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016) |
| UNE-EN ISO 11957:2010 | Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
| UNE-EN ISO 16283-3:2016 | Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 3: Façade sound insulation (ISO 16283-3:2016) |
| UNE-EN ISO 16283-1:2015 | Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 16283-1:2014) |
| UNE-EN ISO 10140-2:2011 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) |
| UNE-EN ISO 11546-2:2010 | Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
| UNE-EN 14509:2014 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| UNE-EN 13241-1:2004 | Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics |
| UNE-EN ISO 2603:2017 | Simultaneous interpreting - Permanent booths - Requirements (ISO 2603:2016) |
| UNE-EN 13915:2018 | Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods |
| UNE-EN 14351-1:2006 | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics |
| UNE-EN ISO 10140-5:2011 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010) |
| UNE-EN 16286-2:2014 | Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
| UNE-EN 13141-8:2015 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room |
| UNE-EN 16153:2013 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| UNE-EN 16703:2015 | Acoustics - Test code for drywall systems of plasterboard with steel studs - Airborne sound insulation |
| UNE-EN 520:2005 | Gypsum plasterboards - Definitions, requirements and test methods |
| UNE-EN 16361:2014 | Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics |
| UNE-EN ISO 12354-4:2018 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 4: Transmission of indoor sound to the outside (ISO 12354-4:2017) |
| UNE-EN 13141-2:2011 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices |
| UNE-EN 13964:2016 | Suspended ceilings - Requirements and test methods |
| UNE EN 16309 : 0 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| UNE-EN 13141-11:2015 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units |
| UNE 102043:2013 | Installation of construction systems with gypsum plasterboards. Partitions, wall linings and ceilings. Definitions, applications and recommendations. |
| UNE-EN 12859:2012 | Gypsum blocks - Definitions, requirements and test methods |
| UNE-EN 12758:2011 | Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties |
| UNE-EN ISO 10848-4:2011 | Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 4: Application to junctions with at least one heavy element (ISO 10848-4:2010) |
| UNE-EN 12602:2011 | Prefabricated reinforced components of autoclaved aerated concrete |
| UNE-EN 13830:2016 | Curtain walling - Product standard |
| BS 2750-3(1995) : 1995 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: LABORATORY MEASUREMENTS OF AIRBORNE SOUND INSULATION OF BUILDING ELEMENTS |
| ISO 140-5:1998 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 5: Field measurements of airborne sound insulation of façade elements and façades |
| ISO 10848-2:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 2: Application to Type B elements when the junction has a small influence |
| ISO 10140-2:2010 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 2: Measurement of airborne sound insulation |
| ISO 140-4:1998 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 4: Field measurements of airborne sound insulation between rooms |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.