ISO 717-2:2013
Withdrawn
Withdrawn
View Superseded by
Acoustics — Rating of sound insulation in buildings and of building elements — Part 2: Impact sound insulation
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
02-19-2013
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO 717-2:2013: a) defines single-number quantities for impact sound insulation in buildings and of floors; b) gives rules for determining these quantities from the results of measurements carried out in one-third-octave bands in accordance with ISO 10140-3 and ISO 140-7, and in octave bands in accord-ance with that option in ISO 140-7 for field measurements only; c) defines single-number quantities for the impact sound reduction of floor coverings and floating floors calculated from the results of measurements carried out in accordance with ISO 10140-3; d) specifies a procedure for evaluating the weighted reduction in impact sound pressure level by floor coverings on lightweight floors.
The single-number quantities in accordance with ISO 717-2:2013 are intended for rating impact sound insulation and for simplifying the formulation of acoustical requirements in building codes. An additional single-number evaluation in steps of 0,1 dB is indicated for the expression of uncertainty (except for spectrum adaptation terms).The required numerical values of the single-number quantities are specified according to varying needs.
The rating of results from measurements carried out over an enlarged frequency range is described in an annex.
A method for obtaining single-number quantities for bare heavy floors according to their performance in combination with floor coverings is described in a second annex.
An example of the calculation of a single-number quantity is given in a third annex.
| Committee |
ISO/TC 43/SC 2
|
| DevelopmentNote |
Supersedes ISO/DIS 717-2. (02/2013)
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN 1307 : 2014 + A1 2016 | Identical |
| NBN EN ISO 717-2 : 2013 | Identical |
| NEN EN ISO 717-2 : 2013 | Identical |
| NS EN ISO 717-2 : 2013 | Identical |
| I.S. EN ISO 717-2:2013 | Identical |
| PN EN ISO 717-2 : 2013 | Identical |
| BS EN ISO 717-2:2013 | Identical |
| EN ISO 717-2:2013 | Identical |
| DIN EN ISO 717-2:2013-06 | Identical |
| NF EN ISO 717-2 : 2013 | Identical |
| UNE-EN ISO 717-2:2013 | Identical |
| DIN 52210-4:1984-08 | Similar to |
| I.S. EN 686:2011 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM ON A FOAM BACKING |
| 11/30213807 DC : 0 | BS ISO 14486 - LAMINATE FLOOR COVERINGS - LAMINATE FLOOR COVERING - SPECIFICATION |
| 14/30313892 DC : 0 | BS EN ISO 10140-1 - ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS |
| I.S. EN 12354-2:2000 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 2: IMPACT SOUND INSULATION BETWEEN ROOMS |
| 15/30328765 DC : 0 | BS EN 12602 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| I.S. EN 13297:2007 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS |
| BS EN ISO 10848-2:2017 | Acoustics. Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Application to Type B elements when the junction has a small influence |
| 10/30231775 DC : DRAFT SEP 2010 | BS EN 687 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM ON A CORKMENT BACKING |
| DIN EN 15037-3:2011-07 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks (includes Amendment A1:2011) |
| 08/30087642 DC : 0 | ISO 10140-1 - ACOUSTICS LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: TEST CODES |
| PD CEN/TR 15226:2006 | Building products. Treatment of acoustics in product technical specifications |
| BS EN 16309 : 2014 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| 06/30151309 DC : DRAFT SEP 2006 | BS EN 1307 - TEXTILE FLOOR COVERINGS - CLASSIFICATION OF PILE CARPET |
| NF EN ISO 12354-2 : 2017 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 2: IMPACT SOUND INSULATION BETWEEN ROOMS |
| I.S. EN ISO 12354-2:2017 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 2: IMPACT SOUND INSULATION BETWEEN ROOMS (ISO 12354-2:2017) |
| S.R. CEN/TS 15398:2016 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS - COMPLEMENTARY ELEMENT |
| EN ISO 10848-3:2017 | Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 3: Application to Type B elements when the junction has a substantial influence (ISO 10848-3:2017) |
| PREN 12602 : DRAFT 2015 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| I.S. CEN/TR 15226:2006 | BUILDING PRODUCTS - TREATMENT OF ACOUSTICS IN PRODUCT TECHNICAL SPECIFICATIONS |
| ASTM E 2179 : 2003 : R2016 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| I.S. EN ISO 10140-5:2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT (ISO 10140-5:2010) |
| CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element |
| DIN EN ISO 10052:2010-10 | Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2004 + Amd 1:2010) (includes Amendment A1:2010) |
| BS EN ISO 11690-2:1997 | Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control measures |
| DIN EN ISO 140-16:2006-11 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 16: LABORATORY MEASUREMENT OF THE SOUND REDUCTION INDEX IMPROVEMENT BY ADDITIONAL LINING |
| CEN/TS 16354:2013 | Laminate floor coverings - Underlays - Specification, requirements and test methods |
| EN ISO 12354-2:2017 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms (ISO 12354-2:2017) |
| EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
| EN 12103:1999 | Resilient floor coverings - Agglomerated cork underlays - Specification |
| CEN/TR 15226:2006 | Building products - Treatment of acoustics in product technical specifications |
| DIN EN 686:2011-07 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM ON A FOAM BACKING |
| EN ISO 17624:2004 | Acoustics - Guidelines for noise control in offices and workrooms by means of acoustical screens (ISO 17624:2004) |
| EN ISO 16251-1:2014 | Acoustics - Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up - Part 1: Heavyweight compact floor (ISO 16251-1:2014) |
| NBR 14917-1 : 2017 ERRATA 1 2017 | RESILIENT FLOOR COVERING - SHEET (ROLL) OR TILE (STRIP) HOMOGENEOUS OR HETEROGENEOUS VINYL FLEXIBLE PVC - PART 1: REQUIREMENTS, FEATURES AND CLASSES |
| 13/30269186 DC : 0 | BS EN ISO 16283-2 - ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION |
| I.S. EN ISO 16251-1:2014 | ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT COMPACT FLOOR (ISO 16251-1:2014) |
| I.S. EN 1470:2008 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED FLOOR COVERINGS EXCEPT FOR NEEDLED PILE FLOOR COVERINGS |
| I.S. EN ISO 140-11:2005 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 11: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT SOUND BY FLOOR COVERINGS ON LIGHTWEIGHT REFERENCE FLOORS |
| 16/30334498 DC : 0 | BS EN ISO 12354-2 - BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 2: IMPACT SOUND INSULATION BETWEEN ROOMS |
| DIN EN 16205:2013-09 | LABORATORY MEASUREMENT OF WALKING NOISE ON FLOORS |
| PD CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings. Floor covering standard symbols. Complementary element |
| 17/30362053 DC : DRAFT SEP 2017 | BS EN ISO 16283-2 - ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION |
| 17/30354239 DC : 0 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| DIN EN 16025-1:2013-07 | THERMAL AND/OR SOUND INSULATING PRODUCTS IN BUILDING CONSTRUCTION - BOUND EPS BALLASTINGS - PART 1: REQUIREMENTS FOR FACTORY PREMIXED EPS DRY PLASTER |
| DIN EN 12602:2015-12 (Draft) | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| BS EN ISO 16251-1:2014 | Acoustics. Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up Heavyweight compact floor |
| BS EN 16025-1:2013 | Thermal and/or sound insulating products in building construction. Bound EPS ballastings Requirements for factory premixed EPS dry plaster |
| 01/563076 DC : DRAFT AUG 2001 | BS EN ISO 17624 - ACOUSTICS - GUIDELINES FOR NOISE CONTROL IN OFFICES AND WORKROOMS BY MEANS OF ACOUSTICAL SCREENS |
| 10/30218985 DC : DRAFT JUNE 2010 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| 00/565268 DC : DRAFT NOV 2000 | BS EN ISO 10052 - ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF EQUIPMENT SOUND - SURVEY METHOD |
| BS EN ISO 12354-2:2017 | Building acoustics. Estimation of acoustic performance of buildings from the performance of elements Impact sound insulation between rooms |
| 08/30178840 DC : DRAFT AUG 2008 | BS EN 15037-3 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
| BS EN ISO 10140-3 : 2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION |
| I.S. EN ISO 10848-2:2017 | ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING RMS - PART 2: APPLICATION TO TYPE B ELEMENTS WHEN THE JUNCTION HAS A SMALL INFLUENCE (ISO 10848-2:2017) |
| I.S. EN ISO 10140-1:2016 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS (ISO/DIS 10140-1:2014) |
| BS EN 13369:2013 | Common rules for precast concrete products |
| BS EN ISO 10140-1 : 2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS |
| I.S. EN 13369:2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| I.S. EN ISO 10052:2005 | ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD |
| I.S. EN 16309:2014 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| 16/30333219 DC : 0 | BS EN 16354 - LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 10140-3:2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION (ISO 10140-3:2010) |
| ASTM E 2179 : 2003 : EDT 1 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| DIN EN 1520:2011-06 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| DIN EN ISO 17624:2005-03 | Acoustics - Guidelines for noise control in offices and workrooms by means of acoustical screens (ISO 17624:2004) |
| BS EN ISO 140-6:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurements of impact sound insulation of floors |
| BS EN 686:2011 | Resilient floor coverings. Specification for plain and decorative linoleum on a foam backing |
| DIN EN 1470:1998-01 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED FLOOR COVERINGS EXCEPT FOR NEEDLED PILE FLOOR COVERINGS |
| I.S. EN 688:2011 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR CORKLINOLEUM |
| I.S. EN 1520:2011 | PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT |
| DIN EN 13297:2000-11 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS |
| DIN EN 12602:2016-12 | Prefabricated reinforced components of autoclaved aerated concrete |
| VDI 4100:2012-10 | Sound insulation between rooms in buildings - Dwellings - Assessment and proposals for enhanced sound insulation between rooms |
| VDI 3762:2012-01 | Sound insulation by means of raised access floors and hollow floors |
| VDI 3755:2015-01 | Sound insulation and sound absorption of suspended ceilings |
| DIN EN ISO 10140-5 E : 2014 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT (ISO 10140-5:2010 + AMD.1:2014) |
| 17/30342985 DC : 0 | BS ISO 19488 - ACOUSTICS - ACOUSTIC CLASSIFICATION OF DWELLINGS |
| BS EN ISO 10140-5:2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT |
| I.S. EN ISO 140-12:2000 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR |
| 10/30229922 DC : DRAFT SEP 2010 | BS EN 686 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM ON A FOAM BACKING |
| 02/123737 DC : DRAFT OCT 2002 | EN 1307 - TEXTILE FLOOR COVERINGS - CLASSIFICATION OF PILE CARPETS |
| 03/113341 DC : DRAFT SEP 2003 | BS EN ISO 140-11 - ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 11: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT SOUND BY FLOOR COVERINGS ON LIGHTWEIGHT REFERENCE FLOORS |
| ASTM E 2179 : 2003 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| ASTM E 2179 : 2003 : R2009 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| I.S. EN 16025-1:2013 | THERMAL AND/OR SOUND INSULATING PRODUCTS IN BUILDING CONSTRUCTION - BOUND EPS BALLASTINGS - PART 1: REQUIREMENTS FOR FACTORY PREMIXED EPS DRY PLASTER |
| BS EN 15037-3 : 2009 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
| BS EN ISO 10848-3:2017 | Acoustics. Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Application to Type B elements when the junction has a substantial influence |
| ISO 10848-3:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 3: Application to Type B elements when the junction has a substantial influence |
| DIN EN 13369:2013-08 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| EN ISO 10848-1:2017 | Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2017) |
| EN 687:2011 | Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing |
| ASTM E 2179 : 2003 : EDT 2 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| EN 16205:2013+A1:2018 | Laboratory measurement of walking noise on floors |
| PREN 16354 : DRAFT 2016 | LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
| EN ISO 10848-2:2017 | Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 2: Application to Type B elements when the junction has a small influence (ISO 10848-2:2017) |
| I.S. EN ISO 10848-3:2017 | ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING RMS - PART 3: APPLICATION TO TYPE B ELEMENTS WHEN THE JUNCTION HAS A SUBSTANTIAL INFLUENCE (ISO 10848-3:2017) |
| DIN EN 1470:2009-02 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED FLOOR COVERINGS EXCEPT FOR NEEDLED PILE FLOOR COVERINGS |
| DIN EN 15114:2008-11 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF TEXTILE FLOOR COVERINGS WITHOUT PILE |
| ISO 140-11:2005 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors |
| BS EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| BS EN 15114 : 2006 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF TEXTILE FLOOR COVERINGS WITHOUT PILE |
| BS EN 688:2011 | Resilient floor coverings. Specification for corklinoleum |
| ISO 10140-1:2016 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products |
| EN 20140-2:1993 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 2: Determination, verification and application of precision data (ISO 140-2:1991) |
| DIN EN 16309:2014-12 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| BS EN 16205 : 2013 | LABORATORY MEASUREMENT OF WALKING NOISE ON FLOORS |
| DIN EN ISO 16251-1:2014-11 | ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT COMPACT FLOOR (ISO 16251-1:2014) |
| I.S. EN ISO 140-16:2007 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 16: LABORATORY MEASUREMENT OF THE SOUND REDUCTION INDEX IMPROVEMENT BY ADDITIONAL LINING |
| PREN 13369 : DRAFT 2017 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| 06/30155788 DC : DRAFT SEP 2006 | BS EN 13297 - TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS |
| PD CEN/TS 16354:2013 | Laminate floor coverings. Underlays. Specification, requirements and test methods |
| ISO 140-8:1997 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor |
| 93/108873 DC : DRAFT OCT 1993 | PREN 1168 - FLOOR ON PRECAST PRESTRESSED HOLLOW CORE ELEMENTS |
| 08/30087659 DC : 0 | ISO 10140-5 - ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT |
| I.S. EN 687:2011 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM ON A CORKMENT BACKING |
| BS EN ISO 10848-1:2017 | Acoustics. Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Frame document |
| EN ISO 16283-2:2015 | Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 16283-2:2015) |
| I.S. EN 16205:2013 | LABORATORY MEASUREMENT OF WALKING NOISE ON FLOORS |
| 13/30273886 DC : 0 | BS EN 16518 - RESILIENT FLOOR COVERINGS - MEASUREMENT OF IN-ROOM IMPACT NOISE |
| DIN EN ISO 16283-2:2016-05 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION (ISO 16283-2:2015) |
| BS EN 687:2011 | Resilient floor coverings. Specification for plain and decorative linoleum on a corkment backing |
| ISO 10848-1:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 1: Frame document |
| ISO 16283-2:2015 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation |
| ISO 10848-2:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 2: Application to Type B elements when the junction has a small influence |
| ISO 15712-2:2005 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 2: Impact sound insulation between rooms |
| I.S. EN 15037-3:2009 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
| ISO 12354-2:2017 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 2: Impact sound insulation between rooms |
| BS EN ISO 140-11:2005 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors |
| ISO 16251-1:2014 | Acoustics — Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up — Part 1: Heavyweight compact floor |
| ISO 10052:2004 | Acoustics — Field measurements of airborne and impact sound insulation and of service equipment sound — Survey method |
| BS EN 12354-2:2000 | Building acoustics. Estimation of acoustic performance in buildings from the performance of elements Impact sound insulation between rooms |
| ISO 10140-3:2010 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation |
| ISO 140-16:2006 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 16: Laboratory measurement of the sound reduction index improvement by additional lining |
| BS EN ISO 17624:2004 | Acoustics. Guidelines for noise control in offices and workrooms by means of acoustical screens |
| BS EN 13297:2007 | Textile floor coverings. Classification of needled pile floor coverings |
| ISO 17624:2004 | Acoustics — Guidelines for noise control in offices and workrooms by means of acoustical screens |
| ISO 140-6:1998 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 6: Laboratory measurements of impact sound insulation of floors |
| BS EN ISO 140-16:2006 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurement of the sound reduction index improvement by additional lining |
| BS EN ISO 140-7:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of impact sound insulation of floors |
| BS EN 12103:1999 | Resilient floor coverings. Agglomerated cork underlays. Specification |
| EN 1470:2008 | Textile floor coverings - Classification of needled floor coverings except for needled pile floor coverings |
| EN ISO 140-11:2005 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors (ISO 140-11:2005) |
| EN 688:2011 | Resilient floor coverings - Specification for corklinoleum |
| EN 16309:2014+A1:2014 | Sustainability of construction works - Assessment of social performance of buildings - Calculation methodology |
| EN ISO 140-12 : 2000 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR |
| EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| EN ISO 140-6 : 1998 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 6: LABORATORY MEASUREMENTS OF IMPACT SOUND INSULATION OF FLOORS |
| EN 686:2011 | Resilient floor coverings - Specification for plain and decorative linoleum on a foam backing |
| EN 15037-3:2009+A1:2011 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks |
| EN 15114:2006+A1:2008 | Textile floor coverings - Classification of textile floor coverings without pile |
| EN ISO 140-8 : 1997 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 8: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A HEAVYWEIGHT STANDARD FLOOR |
| EN ISO 140-16:2006 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 16: Laboratory measurement of the sound reduction index improvement by additional lining (ISO 140-16:2006) |
| EN 16025-1:2013 | Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster |
| BS EN ISO 16283-2:2015 | Acoustics. Field measurement of sound insulation in buildings and of building elements Impact sound insulation |
| 08/30087650 DC : 0 | ISO 10140-3 - ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION |
| 10/30231778 DC : DRAFT SEP 2010 | BS EN 688 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR CORKLINOLEUM |
| 16/30344233 DC : 0 | BS EN ISO 10848-4 - MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING ROOMS - PART 4: APPLICATION TO JUNCTIONS WITH AT LEAST ONE TYPE A ELEMENT |
| 12/30239340 DC : 0 | BS ISO 16251-1 - ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT FLOOR |
| EN ISO 10140-1:2016 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016) |
| ISO 6242-3:1992 | Building construction — Expression of users' requirements — Part 3: Acoustical requirements |
| BS EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
| I.S. EN ISO 16283-2:2015 | ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION (ISO/DIS 16283-2:2013) |
| I.S. EN 13369:2018 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| S.R. CEN/TS 16354:2013 | LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
| EN 13369:2018 | Common rules for precast concrete products |
| I.S. EN ISO 10848-1:2017 | ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING ROOMS - PART 1: FRAME DOCUMENT (ISO 10848-1:2017) |
| I.S. EN 12602:2016 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| DIN EN 13297:2007-12 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS |
| BS EN 1470:2008 | Textile floor coverings. Classification of needled floor coverings except for needled pile floor coverings |
| ISO 140-7:1998 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 7: Field measurements of impact sound insulation of floors |
| BS EN ISO 10052 : 2004 | ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD |
| BS EN ISO 140-8:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor |
| ISO 10140-5:2010 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment |
| DIN EN ISO 10140-5:2014-09 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010 + Amd.1:2014) (includes Amendment A1:2014) |
| DIN EN ISO 10140-3:2015-11 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2010 + Amd. 1:2015) (includes Amendment A1:2015) |
| DIN EN 688:2011-07 | Resilient floor coverings - Specification for corklinoleum |
| DIN EN 687:2011-07 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM ON A CORKMENT BACKING |
| EN 12354-2:2000 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms |
| DIN EN ISO 140-11:2005-08 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 11: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT SOUND BY FLOOR COVERINGS ON LIGHTWEIGHT REFERENCE FLOORS |
| I.S. EN 15114:2006 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF TEXTILE FLOOR COVERINGS WITHOUT PILE |
| UNE-EN 15037-3:2010 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks |
| NBR 15575-5 : 2013 | RESIDENTIAL BUILDINGS - PERFORMANCE - PART 5: REQUIREMENTS FOR ROOFING SYSTEMS |
| UNE-EN ISO 16283-2:2016 | Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 16283-2:2015) |
| UNE-EN ISO 10140-1:2016 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016) |
| UNE-EN 16025-1:2016 | Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster |
| UNE-EN ISO 10140-5:2011 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010) |
| UNE-EN 688:2011 | Resilient floor coverings - Specification for corklinoleum |
| UNE-EN ISO 16251-1:2015 | Acoustics - Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up - Part 1: Heavyweight compact floor (ISO 16251-1:2014) |
| UNE-EN 686:2011 | Resilient floor coverings - Specification for plain and decorative linoleum on a foam backing |
| UNE-EN 16205:2013 | Laboratory measurement of walking noise on floors |
| UNE EN 16309 : 0 | SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY |
| UNE-EN ISO 10140-3:2011 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2010) |
| UNE-EN 687:2011 | Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing |
| UNE-EN ISO 10848-4:2011 | Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 4: Application to junctions with at least one heavy element (ISO 10848-4:2010) |
| UNE-EN 12602:2011 | Prefabricated reinforced components of autoclaved aerated concrete |
| ISO 140-7:1998 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 7: Field measurements of impact sound insulation of floors |
| ISO 10140-1:2016 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 10140-3:2010 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation |
| ISO 10140-5:2010 | Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.